DOCSLIB.ORG

Kinetics: F=Ma (Ch. 3 & 7) Review

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Kinetics: F=Ma (Ch. 3 & 7) Review Kinetics: F=ma (Ch. 3 & 7) Review Lecture 32 ME 231: Dynamics Question of the Day What is the most important concept in mechanics? Free Body Diagram What is the most important B F ma concept in dynamics? B Fx max mx Equations of Motion B Fy may my B Fz maz mz ME 231: Dynamics 2 Outline for Today # Question ofof the dayday # Where are we in the course? # Inverse vs. forward dynamics # Kinetics: cause of motion # Possible solutions to kinetics problems # Direct application of Newton’s 2nd Law # Plane motion types for rigid bodies # Equations, equations, equations… # Exam 2a breakdown (kinetics: F=ma) ME 231: Dynamics 3 Where are we in the course? Concept: What is dynamics? Chapters 1, 2, 6 Chapters 3, 5, 7, 8 Kinematics Kinetics Dynamics Relationship Relationship among position, among forces velocity, and (and acceleration moments)and acceleration ME 231: Dynamics 4 Where are we in the course? Calculation: How do we use dynamics? Newton’s 2nd Law Force. A push or pull Mass. Measure of the resistance exerted on a body, of a body to linear acceleration. characterized by: m Acceleration. Velocity # magnitude F = a rate of change with # direction respect to # point of time application ME 231: Dynamics 5 Inverse vs. Forward Dynamics inverse Velocities d d Forces F ma dt dt Positions Velocities Forces F ma O O Positions forward MEME 231:231: DDynamicsyna 6 Kinetics: Cause of Motion? Concept: What is kinetics? ME 202 Chapters 1, 2, 6 Chapters 3, 5, 7, 8 Statics Kinematics Kinetics Relationship Relationship Relationship among forces among position, among forces (and moments) velocity, and (and and equilibrium acceleration moments)and acceleration ME 231: Dynamics 7 Possible Solutions to Kinetics Problems # Direct application of Newton’s 2nd Law – force-mass-acceleration method – Chapters 3 and 7 # UseUse of impulseimpulse andand momentummomentum methodsmethods – ChaptersChapters 5 and 8 # UseUse of workwork andand eenergynergy principlesprinciples – Chapter 4 ME 231: Dynamics 8 Step-by-Step Solution Process 1. Kinematics – Identify type of motion – Solve for linear and angular accelerations 2. Diagram – Assign inertial coordinate system – Draw complete free-body diagram –Draw kinetic diagram to clarify equations 3. Equations of motion – Apply 2 linear and 1 angular equations – Maintain consistent sense – Solve for no more than 5 scalar unknowns (3 scalar equations of motion and 2 scalar relations from the relative-acceleration equation) ME 231: Dynamics 9 Outline for Today # Question ofof the dayday # Where are we in the coursecourse?? # Inverse vs. forwardforward dynamicdynamicss # Kinetics: ccauseause ooff mmotionotion # Possible solutions to kinetics pproblemsroblems # Direct application of Newton’s 2nd Law # Plane motion types for rigid bodies # Equations, equations, equations… # Exam 2a breakdown (kinetics: F=ma) ME 231: Dynamics 10 Direct Application of Newton’s 2nd Law F1 F2 F3 f1 f2 f3 miri B F Bf B miri B F mr or B F ma B Fx max B Fy may B Fz maz ME 231: Dynamics 11 Rectangular (x-y) Coordinates: Exercise A particle with mass of 10 slugs moving in two-dimensions has a position vector (r) as a function of time (t) with coordinates given by x(t) = t2 –4t + 20 , y(t) = 3 sin(2t) where r is measured in feet and t is in seconds. Determine the magnitude of the net force (F) accelerating the particle at time t = 3 s. ME 231: Dynamics 12 Polar (r-) Coordinates: Exercise 2 a r r er r 2r e Tube A rotates about the vertical O-axis with constant angular velocity and contains a small cylinder B of mass m whose radial position is controlled by a cord passing through the tube and wound around a drum of radius b. Determine the tension T in the cord and - component of force F if the drum has a constant angular rate of rotation of as shown. ME 231: Dynamics 13 Normal and Tangential (n-t) Coordinates: Exercise v2 a e v e n t A 1500-kg car enters an s-curve and slows down from 100 km/h at A to a speed of 50 km/h as it passes C. Determine the total horizontal force exerted by the road on the tires at positions A, B, and C. ME 231: Dynamics 14 Outline for Today # Question ofof the dayday # Where are we in the coursecourse?? # Inverse vs. forwardforward dynamicdynamicss # Kinetics: ccauseause ooff mmotionotion # Possible solutions to kinetics pproblemsroblems # Direct aapplicationpplication of Newton’s 2ndnd LawLaw # Plane motion types for rigid bodies # Equations, equations, equations… # Exam 2a breakdown (kinetics: F=ma) ME 231: Dynamics 15 Plane Motion Types A’A A’ for Rigid Bodies B’B B’ # Translation A’AA # Fixed-axis rotation B’BB’ # General plane motion A B ME 231: Dynamics 16 Rigid-Body Translation rectilinear curvilinear B M I 0 B M I 0 BF ma G G G G B M mad B M ma d 0 P A n A B M 0 B M ma d 0 A B t B ME 231: Dynamics 17 Rigid-Body Translation: Exercise A cleated conveyor belt transports solid cylinders up a 15º incline. The diameter of each cylinder is half its height. Determine the maximum acceleration for the belt without tipping the cylinders as it starts. ME 231: Dynamics 18 Fixed-Axis Rotation free-body kinetic diagram diagram # Mass center’s circular motion easily expressed in n-t coordinates # Plane-motion B F ma B M I BM I equations: G G O O ME 231: Dynamics 19 Fixed-Axis Rotation: Exercise Determine the angular acceleration and the force on the bearing at O for (a) the narrow ring of mass m and (b) the flat circular disk of mass m immediately after each is released from rest with OC horizontal. ME 231: Dynamics 20 General Plane Motoin: Combined Translation and Rotation B M P IG mad B M I BF ma G G B M P I P - maP ME 231: Dynamics 21 General Plane Motion: Exercise A truck has a mass of 2030 kg and carries a 1500-mm-diameter spool of cable with a mass of 0.75 kg per meter of length. There are 150 turns on the full spool. The empty spool has a mass of 140 kg with radius of gyration of 530 mm. Determine the tension T in the cable when the truck starts from rest with an acceleration of 0.2g. ME 231: Dynamics 22 Outline for Today # Question ofof the dayday # Where are we in the coursecourse?? # Inverse vs. forwardforward dynamicdynamicss # Kinetics: ccauseause ooff mmotionotion # Possible solutions to kinetics pproblemsroblems # Direct aapplicationpplication of Newton’s 2ndnd LawLaw # Plane motion types for ririgidgid bodiebodiess # Equations, equations, equations… # Exam 2a breakdown (kinetics: F=ma) ME 231: Dynamics 23 Equations, Equations, Equations… Particle Kinetics: F=ma Lecture Equations nd 18. Newton 2 Law B F ma B Fy may my 19. Eqs. of Motion B F ma mx B F ma mz 20. Rectilinear x x z z B F ma B Fr mar n n 21. Curvilinear B F ma B Ft mat t2 G mv G1 F dt G 2 Ot 27. Lin. ImImp.p. MoMom.m. F G 1 G 0 t2 HO r mv HO MO dt HO 1 Ot 2 28. Ang.Ang. Imp. MMom.om. 1 H 0 B MO HO O G mv HG B -i mi-i H P HG - mv 29. SSys.ys. ImImp.p. MomMom.. B M H B M H - ma HO B ri mi vi G G P G ME 231: Dynamics 24 Equations, Equations, Equations… Rigid Body Kinetics: F=ma Lecture Equations nd B M I mad 18. Newton 2 Law B MG HG P G 22. Gen. Eqs. Mot. I H B- F B M I - ma 23. Gen. Eqs. Mot. II G i i P P P B F ma B MG IG B MO IO 24. Fixed-Axis Rot. 2 2 IO I Gmr IO mkO B M I - ma B M I mad 25. Gen. Plane Mot. I P P P P G BF ma B M I 26. Gen. Plane Mot. II G G G mv HG IG2 H P IG2 mvmvdd HO IO2 B F G B M H B M H B M H 31. Body Imp. MomMom.. G G P P O O t t G 2 F dt G H 2 M dt H 1 O 2 G 1 O G G 2 t1 t1 ME 231: Dynamics 25 Exam 2a Breakdown (particle kinetics: F=ma) 40 35 30 25 20 40 40 34 34 30 15 26 10 number of points 5 0 0 18. Newton 19. Eqs. of 20. Rectilinear 21. 27. Lin. Imp.Imp. 28.28. AnAng.g. ImImp.p. 29.29. Sys.Sys. Imp.Imp. 2nd Law Motion Curvilinear Mom.Mom. Mom.Mom. Mom.Mom. lecture ME 231: Dynamics 26 Exam 2 Breakdown (rigid body kinetics: F=ma) 70 60 50 40 70 30 40 40 40 20 34 number of points 26 10 0 0 18. Newton 22. Gen. Eqs. 23. Gen. Eqs. 24. Fixed-Axis 25. Gen. 26. Gen. 31. BodyBody ImImp.p. 2nd Law of Motion I of Motion II Rotation Plane Mot. I Plane Mot. II Mom.Mom. lecture ME 231: Dynamics 27 For Next Time… # Review Chapters 3 & 7 # Review Lectures slides – http://rrg.utk.edu/resources/ME231/lectures.html # Review Examples from class – http://rrg.utk.edu/resources/ME231/examples.html # Exam #2a on Friday (11/9) ME 231: Dynamics 28.
Load more

Recommended publications
  • Modeling the Physics of RRAM Defects
    Modeling the physics of RRAM defects A model simulating RRAM defects on a macroscopic physical level T. Hol Modeling the physics of RRAM defects A model simulating RRAM defects on a macroscopic physical level by T. Hol to obtain the degree of Master of Science at the Delft University of Technology, to be defended publicly on Friday August 28, 2020 at 13:00. Student number: 4295528 Project duration: September 1, 2019 – August 28, 2020 Thesis committee: Prof. dr. ir. S. Hamdioui TU Delft, supervisor Dr. Ir. R. Ishihara TU Delft Dr. Ir. S. Vollebregt TU Delft Dr. Ir. M. Taouil TU Delft Ir. M. Fieback TU Delft, supervisor An electronic version of this thesis is available at https://repository.tudelft.nl/. Abstract Resistive RAM, or RRAM, is one of the emerging non-volatile memory (NVM) technologies, which could be used in the near future to fill the gap in the memory hierarchy between dynamic RAM (DRAM) and Flash, or even completely replace Flash. RRAM operates faster than Flash, but is still non-volatile, which enables it to be used in a dense 3D NVM array. It is also a suitable candidate for computation-in-memory, neuromorphic computing and reconfigurable computing. However, the show stopping problem of RRAM is that it suffers from unique defects, which is the reason why RRAM is still not widely commercially adopted. These defects differ from those that appear in CMOS technology, due to the arbitrary nature of the forming process. They can not be detected by conventional tests and cause defective devices to go unnoticed.
    [Show full text]
  • Kinematics, Kinetics, Dynamics, Inertia Kinematics Is a Branch of Classical
    Course: PGPathshala-Biophysics Paper 1:Foundations of Bio-Physics Module 22: Kinematics, kinetics, dynamics, inertia Kinematics is a branch of classical mechanics in physics in which one learns about the properties of motion such as position, velocity, acceleration, etc. of bodies or particles without considering the causes or the driving forces behindthem. Since in kinematics, we are interested in study of pure motion only, we generally ignore the dimensions, shapes or sizes of objects under study and hence treat them like point objects. On the other hand, kinetics deals with physics of the states of the system, causes of motion or the driving forces and reactions of the system. In a particular state, namely, the equilibrium state of the system under study, the systems can either be at rest or moving with a time-dependent velocity. The kinetics of the prior, i.e., of a system at rest is studied in statics. Similarly, the kinetics of the later, i.e., of a body moving with a velocity is called dynamics. Introduction Classical mechanics describes the area of physics most familiar to us that of the motion of macroscopic objects, from football to planets and car race to falling from space. NASCAR engineers are great fanatics of this branch of physics because they have to determine performance of cars before races. Geologists use kinematics, a subarea of classical mechanics, to study ‘tectonic-plate’ motion. Even medical researchers require this physics to map the blood flow through a patient when diagnosing partially closed artery. And so on. These are just a few of the examples which are more than enough to tell us about the importance of the science of motion.
    [Show full text]
  • Hamilton Description of Plasmas and Other Models of Matter: Structure and Applications I
    Hamilton description of plasmas and other models of matter: structure and applications I P. J. Morrison Department of Physics and Institute for Fusion Studies The University of Texas at Austin [email protected] http://www.ph.utexas.edu/ morrison/ ∼ MSRI August 20, 2018 Survey Hamiltonian systems that describe matter: particles, fluids, plasmas, e.g., magnetofluids, kinetic theories, . Hamilton description of plasmas and other models of matter: structure and applications I P. J. Morrison Department of Physics and Institute for Fusion Studies The University of Texas at Austin [email protected] http://www.ph.utexas.edu/ morrison/ ∼ MSRI August 20, 2018 Survey Hamiltonian systems that describe matter: particles, fluids, plasmas, e.g., magnetofluids, kinetic theories, . \Hamiltonian systems .... are the basis of physics." M. Gutzwiller Coarse Outline William Rowan Hamilton (August 4, 1805 - September 2, 1865) I. Today: Finite-dimensional systems. Particles etc. ODEs II. Tomorrow: Infinite-dimensional systems. Hamiltonian field theories. PDEs Why Hamiltonian? Beauty, Teleology, . : Still a good reason! • 20th Century framework for physics: Fluids, Plasmas, etc. too. • Symmetries and Conservation Laws: energy-momentum . • Generality: do one problem do all. • ) Approximation: perturbation theory, averaging, . 1 function. • Stability: built-in principle, Lagrange-Dirichlet, δW ,.... • Beacon: -dim KAM theorem? Krein with Cont. Spec.? • 9 1 Numerical Methods: structure preserving algorithms: • symplectic, conservative, Poisson integrators,
    [Show full text]
  • Model CIB-L Inertia Base Frame
    KINETICS® Inertia Base Frame Model CIB-L Description Application Model CIB-L inertia base frames, when filled with KINETICSTM CIB-L inertia base frames are specifically concrete, meet all specifications for inertia bases, designed and engineered to receive poured concrete, and when supported by proper KINETICSTM vibration for use in supporting mechanical equipment requiring isolators, provide the ultimate in equipment isolation, a reinforced concrete inertia base. support, anchorage, and vibration amplitude control. Inertia bases are used to support mechanical KINETICSTM CIB-L inertia base frames incorporate a equipment, reduce equipment vibration, provide for unique structural design which integrates perimeter attachment of vibration isolators, prevent differential channels, isolator support brackets, reinforcing rods, movement between driving and driven members, anchor bolts and concrete fill into a controlled load reduce rocking by lowering equipment center of transfer system, utilizing steel in tension and concrete gravity, reduce motion of equipment during start-up in compression, resulting in high strength and stiff- and shut-down, act to reduce reaction movement due ness with minimum steel frame weight. Completed to operating loads on equipment, and act as a noise inertia bases using model CIB-L frames are stronger barrier. and stiffer than standard inertia base frames using heavier steel members. Typical uses for KINETICSTM inertia base frames, with poured concrete and supported by KINETICSTM Standard CIB-L inertia base frames
    [Show full text]
  • KINETICS Tool of ANSA for Multi Body Dynamics
    physics on screen KINETICS tool of ANSA for Multi Body Dynamics Introduction During product manufacturing processes it is important for engineers to have an overview of their design prototypes’ motion behavior to understand how moving bodies interact with respect to each other. Addressing this, the KINETICS tool has been incorporated in ANSA as a Multi-Body Dynamics (MBD) solution. Through its use, engineers can perform motion analysis to study and analyze the dynamics of mechanical systems that change their response with respect to time. Through the KINETICS tool ANSA offers multiple capabilities that are accomplished by the functionality presented below. Model definition Multi-body models can be defined on any CAD data or on existing FE models. Users can either define their Multi-body models manually from scratch or choose to automatically convert an existing FE model setup (e.g. ABAQUS, LSDYNA) to a Multi- body model. Contact Modeling The accuracy and robustness of contact modeling are very important in MBD simulations. The implementation of algorithms based on the non-smooth dynamics theory of unilateral contacts allows users to study contact incidents providing accurate solutions that the ordinary regularized methodologies cannot offer. Furthermore, the selection between different friction types maximizes the realism in the model behavior. Image 1: A Seat-dummy FE model converted to a multibody model Image 2: A Bouncing of a piston inside a cylinder BETA CAE Systems International AG D4 Business Village Luzern, Platz 4 T +41 415453650 [email protected] CH-6039 Root D4, Switzerland F +41 415453651 www.beta-cae.com Configurator In many cases, engineers need to manipulate mechanisms under the influence of joints, forces and contacts and save them in different positions.
    [Show full text]
  • Fundamentals of Biomechanics Duane Knudson
    Fundamentals of Biomechanics Duane Knudson Fundamentals of Biomechanics Second Edition Duane Knudson Department of Kinesiology California State University at Chico First & Normal Street Chico, CA 95929-0330 USA [email protected] Library of Congress Control Number: 2007925371 ISBN 978-0-387-49311-4 e-ISBN 978-0-387-49312-1 Printed on acid-free paper. © 2007 Springer Science+Business Media, LLC All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. 987654321 springer.com Contents Preface ix NINE FUNDAMENTALS OF BIOMECHANICS 29 Principles and Laws 29 Acknowledgments xi Nine Principles for Application of Biomechanics 30 QUALITATIVE ANALYSIS 35 PART I SUMMARY 36 INTRODUCTION REVIEW QUESTIONS 36 CHAPTER 1 KEY TERMS 37 INTRODUCTION TO BIOMECHANICS SUGGESTED READING 37 OF UMAN OVEMENT H M WEB LINKS 37 WHAT IS BIOMECHANICS?3 PART II WHY STUDY BIOMECHANICS?5 BIOLOGICAL/STRUCTURAL BASES
    [Show full text]
  • Chapter 12. Kinetics of Particles: Newton's Second
    Chapter 12. Kinetics of Particles: Newton’s Second Law Introduction Newton’s Second Law of Motion Linear Momentum of a Particle Systems of Units Equations of Motion Dynamic Equilibrium Angular Momentum of a Particle Equations of Motion in Radial & Transverse Components Conservation of Angular Momentum Newton’s Law of Gravitation Trajectory of a Particle Under a Central Force Application to Space Mechanics Kepler’s Laws of Planetary Motion Kinetics of Particles We must analyze all of the forces acting on the racecar in order to design a good track As a centrifuge reaches high velocities, the arm will experience very large forces that must be considered in design. Introduction Σ=Fam 12.1 Newton’s Second Law of Motion • If the resultant force acting on a particle is not zero, the particle will have an acceleration proportional to the magnitude of resultant and in the direction of the resultant. • Must be expressed with respect to a Newtonian (or inertial) frame of reference, i.e., one that is not accelerating or rotating. • This form of the equation is for a constant mass system 12.1 B Linear Momentum of a Particle • Replacing the acceleration by the derivative of the velocity yields dv ∑ Fm= dt d dL =(mv) = dt dt L = linear momentum of the particle • Linear Momentum Conservation Principle: If the resultant force on a particle is zero, the linear momentum of the particle remains constant in both magnitude and direction. 12.1C Systems of Units • Of the units for the four primary dimensions (force, mass, length, and time), three may be chosen arbitrarily.
    [Show full text]
  • Basics of Physics Course II: Kinetics | 1
    Basics of Physics Course II: Kinetics | 1 This chapter gives you an overview of all the basic physics that are important in biomechanics. The aim is to give you an introduction to the physics of biomechanics and maybe to awaken your fascination for physics. The topics mass, momentum, force and torque are covered. In order to illustrate the physical laws in a practical way, there is one example from physics and one from biomechanics for each topic area. Have fun! 1. Mass 2. Momentum 3. Conservation of Momentum 4. Force 5. Torque 1.Mass In physics, mass M is a property of a body. Its unit is kilogram [kg] . Example Physics Example Biomechanics 2. Momentum In physics, the momentum p describes the state of motion of a body. Its unit is kilogram times meter per second [\frac{kg * m}{s}] The momentum combines the mass with the velocity. The momentum is described by the following formula: p = M * v Here p is the momentum, M the mass and v the velocity of the body. © 2020 | The Biomechanist | All rights reserved Basics of Physics Course II: Kinetics | 2 Sometimes the formula sign for the impulse is also written like this: \vec{p} . This is because the momentum is a vectorial quantity and therefore has a size and a direction. For the sake of simplicity we write only p . Example Physics 3. conservation of momentum Let us assume that a billiard ball rolls over a billiard table at a constant speed and then hits a second ball that is lighter than the first ball.
    [Show full text]
  • Kinematics and Kinetics of Elite Windmill Softball Pitching
    Kinematics and Kinetics of Elite Windmill Softball Pitching Sherry L. Werner,*† PhD, Deryk G. Jones,‡ MD, John A. Guido, Jr,† MHS, PT, SCS, ATC, CSCS, and Michael E. Brunet,† MD From the †Tulane Institute of Sports Medicine, New Orleans, Louisiana, and the ‡Sports Medicine Section, Ochsner Clinic Foundation, New Orleans, Louisiana Background: A significant number of time-loss injuries to the upper extremity in elite windmill softball pitchers has been docu- mented. The number of outings and pitches thrown in 1 week for a softball pitcher is typically far in excess of those seen in baseball pitchers. Shoulder stress in professional baseball pitching has been reported to be high and has been linked to pitch- ing injuries. Shoulder distraction has not been studied in an elite softball pitching population. Hypothesis: The stresses on the throwing shoulder of elite windmill pitchers are similar to those found for professional baseball pitchers. Study Design: Descriptive laboratory study. Methods: Three-dimensional, high-speed (120 Hz) video data were collected on rise balls from 24 elite softball pitchers during the 1996 Olympic Games. Kinematic parameters related to pitching mechanics and resultant kinetics on the throwing shoulder were calculated. Multiple linear regression analysis was used to relate shoulder stress and pitching mechanics. Results: Shoulder distraction stress averaged 80% of body weight for the Olympic pitchers. Sixty-nine percent of the variabil- ity in shoulder distraction can be explained by a combination of 7 parameters related to pitching mechanics. Conclusion: Excessive distraction stress at the throwing shoulder is similar to that found in baseball pitchers, which suggests that windmill softball pitchers are at risk for overuse injuries.
    [Show full text]
  • Fractional Poisson Process in Terms of Alpha-Stable Densities
    FRACTIONAL POISSON PROCESS IN TERMS OF ALPHA-STABLE DENSITIES by DEXTER ODCHIGUE CAHOY Submitted in partial fulfillment of the requirements For the degree of Doctor of Philosophy Dissertation Advisor: Dr. Wojbor A. Woyczynski Department of Statistics CASE WESTERN RESERVE UNIVERSITY August 2007 CASE WESTERN RESERVE UNIVERSITY SCHOOL OF GRADUATE STUDIES We hereby approve the dissertation of DEXTER ODCHIGUE CAHOY candidate for the Doctor of Philosophy degree * Committee Chair: Dr. Wojbor A. Woyczynski Dissertation Advisor Professor Department of Statistics Committee: Dr. Joe M. Sedransk Professor Department of Statistics Committee: Dr. David Gurarie Professor Department of Mathematics Committee: Dr. Matthew J. Sobel Professor Department of Operations August 2007 *We also certify that written approval has been obtained for any proprietary material contained therein. Table of Contents Table of Contents . iii List of Tables . v List of Figures . vi Acknowledgment . viii Abstract . ix 1 Motivation and Introduction 1 1.1 Motivation . 1 1.2 Poisson Distribution . 2 1.3 Poisson Process . 4 1.4 α-stable Distribution . 8 1.4.1 Parameter Estimation . 10 1.5 Outline of The Remaining Chapters . 14 2 Generalizations of the Standard Poisson Process 16 2.1 Standard Poisson Process . 16 2.2 Standard Fractional Generalization I . 19 2.3 Standard Fractional Generalization II . 26 2.4 Non-Standard Fractional Generalization . 27 2.5 Fractional Compound Poisson Process . 28 2.6 Alternative Fractional Generalization . 29 3 Fractional Poisson Process 32 3.1 Some Known Properties of fPp . 32 3.2 Asymptotic Behavior of the Waiting Time Density . 35 3.3 Simulation of Waiting Time . 38 3.4 The Limiting Scaled nth Arrival Time Distribution .
    [Show full text]
  • Coordination Indices Between Lifting Kinematics and Kinetics Xu Xu North Carolina State University
    Industrial and Manufacturing Systems Engineering Industrial and Manufacturing Systems Engineering Publications 2008 Coordination indices between lifting kinematics and kinetics Xu Xu North Carolina State University Simon M. Hsiang North Carolina State University Gary Mirka Iowa State University, [email protected] Follow this and additional works at: http://lib.dr.iastate.edu/imse_pubs Part of the Ergonomics Commons, Industrial Engineering Commons, and the Systems Engineering Commons The ompc lete bibliographic information for this item can be found at http://lib.dr.iastate.edu/ imse_pubs/163. For information on how to cite this item, please visit http://lib.dr.iastate.edu/ howtocite.html. This Article is brought to you for free and open access by the Industrial and Manufacturing Systems Engineering at Iowa State University Digital Repository. It has been accepted for inclusion in Industrial and Manufacturing Systems Engineering Publications by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Coordination Indices between Lifting Kinematics and Kinetics Xu Xu, Simon M. Hsiang ** and Gary A. Mirka The Ergonomics Laboratory Edward P. Fitts Department of Industrial and Systems Engineering, Box 7906 North Carolina State University Abstract During a lifting task the movement of the trunk can account for the majority of the external moment about the ankle. Though the angle of trunk flexion and the external moment about the ankles are roughly correlated, this correlation can be reduced by various segmental dynamics and momentums with the upper/lower extremities. Two methods are proposed in this technical note for describing the relationship between the kinematics and the kinetics of a lifting motion.
    [Show full text]
  • Time-Dependent Statistical Mechanics 10. Classical Theory of Chemical Kinetics
    Time-Dependent Statistical Mechanics 10. Classical theory of chemical kinetics c Hans C. Andersen October 18, 2009 One of the most recent applications of classical linear response theory is to Lecture the theory of chemical reaction rate constants, although this is one of the 7 more important and interesting applications of time dependent statistical 10/13/09 mechanics, from a chemistry point of view. At first glance it looks like an unusual and unphysical way of constructing a theory, but in fact it is valid. Before discussing this, we want to review and extend some remarks we made about a linear response situation that we discussed briefly a few lectures ago. 1 Macroscopic description of first order reac- tion kinetics Recall that in getting a microscopic expression for the self diffusion coefficient as an equilibrium time correlation function we compared the predictions of the macroscopic diffusion equation with the predictions of the microscopic equations of motion and assume that both were valid for long enough time scales and distance scales. We now want to do the same thing for chemical reaction rate constants. For simplicity, we shall restrict our attention to first order reactions, but the discussion could certainly be generalized to more complicated reactions. 1 1.1 Chemical rate equations Let’s suppose that the reaction involves conversion of an A molecule to a B molecule and vice versa. k A →f B B →kr A The forward and reverse rate constants are kf and kr. The chemical rate equations are dN A = −k N + k N dt F A r B dN B = k N − k N dt F A r B At equilibrium, each of these derivatives is zero, and we have −kf NA + krNB =0 N k B.eq = f = K NA,eq kr where K is the equilibrium constant of the reaction.
    [Show full text]