DOCSLIB.ORG

KOZO METALLURGICAL SERIES MICROSCOPE XJM Series Microscope XJM100

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
KOZO METALLURGICAL SERIES MICROSCOPE XJM Series Microscope XJM100 KOZO METALLURGICAL SERIES MICROSCOPE XJM Series microscope XJM100 XJM100 The XJM100 series upright metallurgical microscope is capable of reflected and transmitted light enables application on both crystal and opaque samples. The mature ICOS adopts in XJM100 series ensures the excellent optical clarity and contrast required by today's discerning microscopists while delivering an perfect cost-to-performance ratio. CCD or digital camera can be attached for image capture and professional but user-friendly metallurgical analysis softeare is also available for option. Specifications XJM101 XJM102 XJM103 XJM104 Optical Infinity Optical System F=180mm ● ● ● ● System Viewing Seidentopf binocular, inclined at 30° ● ● Head Interpupilary distance 50~75mm Seidentopf trinocular, inclined at 30° ● Interpupilary distance 50~75mm ● Light distribution: 0:100 WF10X/20mm ○ ○ ○ ○ WF10X/18mm ●● ●● ●● ●● Eyepieces WF10X/18mm (Reticule 0.1mm) ● ● ● ● WF5X ○ ○ ○ ○ WF12.5X ○ ○ ○ ○ WF16X ○ ○ ○ ○ Objectives Plan Achromatic 4X/0.40 (S) WD=2.14mm ● ● ● ● Plan Achromatic 10X/0.40 (S) WD=2.14mm ● ● ● ● Plan Achromatic 20X/0.40 (S) WD=2.14mm ● ● ● ● Plan Achromatic 40X/0.65 (S) WD=0.45mm ○ ○ ○ ○ Plan Achromatic 100X/1.25 (S,O) WD=0.12mm ○ ○ ● ● LWD Plan Achromatic 4X/0.10 WD=27.24mm ○ ○ ○ ○ LWD Plan Achromatic 10X/0.25 WD=18.48mm ○ ○ ○ ○ LWD Plan Achromatic 20X/0.40 WD=8.35mm ○ ○ ○ ○ LWD Plan Achromatic 40X/0.65 WD=3.90mm ● ● ● ● LWD Plan Achromatic 50X/0.70 (S) WD=1.95mm ○ ○ ○ ○ LWD Plan Achromatic 80X/0.80 (S) WD=0.85mm ○ ○ ○ ○ Nosepiece Quintuple, inward ● ● ● ● Double layers size: 190×140mm with Scale: Stage 0.1mm ● ● ● ● Moving Range: 78×55mm Stage Plate Place the sample on the plate ● ● ● ● Polarizing Built In Polarizer and Analyzer ● ● ● ● Set Condenser Abbe Condenser NA=1.25 (with iris diaphragm) ● ● Center adjusted, with field diaphragm Koehler Collector ● ● Illumination, Focusing Coaxial coarse and fine focusing knobs ● ● ● ● Unit Filter Blue ● ● 1X ○ ○ C-mount 0.5X ○ ○ 12V 50W halogen lamp (Reflected Illumination) ● ● ● ● Illuminator 6V 20W halogen lamp (Transmitted Illumination) ● ● Pack: 1 carton. G.W.: 15.5KGS, 12KGS, Meas.: 75*36*45CM XJM300 High-contrast, Satisfied brightness, Vivid revivification, Nice resolution ---------XJM300 come up! Observation and evaluation of metallurgical specimens is fast and easy by KOZO's XJM300 series inverted metallurgical microscope with finity plan achromatic optics system. An full-integration design applies in the T-type scope body allowing high stability. Low location preposing focusing system perfectly matches the ergonomics. Polarizer and Analyzer lead a convenient polarizing application. CCD or digital camera can be attached for image capture and professional but user-friendly metallurgical analysis softeare is also available for option. Specifications XJM300 Optical System Finity Optical System ● Viewing Head Seidentopf trinocular, inclined at 45°, light ● distribution: 20:80 WF10X/18mm ●● WF10X/18mm with reticule ● Eyepieces WF5X/20mm ○ WF12.5X/14mm ●● WF16X/13mm ○ Plan Achromatic 2.5X/0.07 ○ Plan Achromatic 4X/0.10 ○ Plan Achromatic 10X/0.25 ● Objectives Plan Achromatic 20X/0.35 (S) ● Plan Achromatic 40X/0.65 (S) ● Plan Achromatic 100X/1.25 (S, O) ● Nosepiece Quadplex ● Double Size: 180×165mm, ● Stage Moving Range: 50×40mm 1 (Φ10) ● Stage Plate 2 (Φ20) ● 3 (Φ40) ○ Main Body ● Polarizing Slide ● Analyzing Slide ● 6V/30W halogen lamp, ● Illuminator Spare lamp: 2 pcs, spare fuse: 2 pcs Filters Blue, Green, Grey, White ● Micrometer Division 0.01mm ○ Pack: 1 carton. G.W.: 15KGS, 11KGS, Meas.: 58.6*58.6*33CM XJM400 XJM400 The optics of XJM400 series inverted metallurgical microscope provide flat, sharp, and brilliantly clear images while achieving longer working distances. Developed for bright field and simple polarizing observation, and designed to be compact, durable but easy operation, it is excellent for metallurgraphic and electronic components as well as materials field and quality control departments. CCD or digital camera can be attached for image capture and professional but user-friendly metallurgical analysis softeare is also available for option. Specification XJM401 XJM402 XJM403 XJM404 Optical Finity Optical System ● ● System Infinity Optical System F=200mm ● ● Seidentopf binocular head, Inclined at 45 ° ● ● Interpupillary distance: 55~75mm Viewing Head Seidentopf trinocular head , Inclined at 45 ° ● ● Interpupillary distance:55~75mm WF10X/20mm ● ● Eyepiece WF10X/22mm ● ● WF10X/20mm with reticule 0.1mm ● ● ● ● Quadruple nosepiece ● ● Nosepiece Quintuple nosepiece ● ● 195 metallurgical objective 4X,10X, 20X, 40X ● ● Infinity metallurgical objective 4X,10X, 20X, 40X ● ● Objective 50X/0.75 WD=1.9mm ○ 80X/0.9 (S) WD=0.9mm ○ ○ ○ Double layers size: 242×172mm Moving range: 75×50mm Stage ● ● ● ● Central Stage 110mm Condenser Abbe NA=1.25 condenser with iris diaphragm & filter ● ● ● ● Coaxial coarse and fine focusing adjustment with rack and pinion Focusing ● ● ● ● mechanism Fine focusing scale: 0.002mm Epi-Kohler illumination with aperture iris diaphragm and field iris ● ● ● ● diaphragm Illumination Transmission light, 12V 30W. AC85V~230V ● ● ● ● Adjustable brightness Analyzer rotatable 360°, polarizer and analyzer can be swing in / out Polarizing ● ● ● ● of the optical path Filter Blue, green, yellow ● ● ● ● Micrometer 0.01mm ● ● ● ● Pack: 1 carton, G.W.: 12KGS, Meas.: 81*31*47CM XJM500 XJM500 As one of our base-model inverted metallurgical microscopes, but the XJM500 series is made with the same precision and quality standards as our more advanced microscopes. Employs all new and improved finity plan optical system and with its small footprint and cost-efficiency, XJM500 series is the best choice for researching of university, factory , institutions and so on. CCD or digital camera can be attached for image capture and professional but user-friendly metallurgical analysis softeare is also available for option. Specification XJM500M XJM500B Optical System Finity Optical System ● ● Viewing Head Seidentopf monocular, inclined at 45° ● Seidentopf binocular, inclined at 45° ● Eyepieces WF10X/18mm ●● ●● WF12.5X/14mm ○ ○ WF16X/13mm ○ ○ WF5X/20mm ○ ○ WF10X/18mm (Reticule, 0.1mm) ○ ○ Plan Achromatic 2.5X/0.07 ○ ○ Plan Achromatic 4X/0.10 ○ ○ Plan Achromatic 10X/0.25 ● ● Objectives Plan Achromatic 20X/0.35 (S) ○ ○ Plan Achromatic 40X/0.65 (S) ● ● Plan Achromatic 100X/1.25 (S,O) ● ● Double stage size: 180×180mm Stage ● ● Moving Range: 50×40mm 1 (Φ10) ● ● Stage Plate 2 (Φ20) ● ● 3 (Φ40) ○ ○ Set of Stage Plate ● ● Main Body ● ● Spare lamp: 2 pcs ● 6V/20W Halogen Lamp ● Spare fuse: 2 pcs Filters Blue, Green, Grey ● ● Micrometer Division 0.01mm ○ ○ This model also can be inside digital camera system with 130K and 320K pixes. Pack: 1 carton, G.W.: 8KGS, N.W.: 7KGS, Meas.: 43.7*26.8*52.2CM XJM600 XJM600 The advanced upright reflected and transmitted light metallurgical microscope XJM600 series is a comprehensive model with multiple applications such as bright and dark field, DIC, polarizing observations, etc. Aimed at the semiconductor industry, wafer manufacturing, electronic information industry, metallurgical industry and so on, XJM600 series is developed for applications like FPD, circuit encapsulation, circuit substrate, material, casting, Metal and Ceramic parts, Precision moulds, etc. The ergonomic design enables your work with XJM600 series comfortable and relax. CCD or digital camera can be attached for image capture and professional but user-friendly metallurgical analysis soft is also available for option. Specification XJM600B XJM600T Optical System Infinity Optical System F=200mm ● ● Viewing Head Seidentopf binocular head ● Seidentopf trinocular head ● Eyepiece WF10X/25mm ●● ●● WF10X/20mm with retical ● ● Objectives Plan Achromatic BD5X/0.1 WD=29.40mm ● ● Plan Achromatic BD10X/0.25 WD=16.00mm ● ● Plan Achromatic BD20X/0.40 WD=10.60mm ● ● Plan Achromatic BD40X/0.60 WD=5.40mm ● ● Plan Achromatic BD50X/0.55 WD=5.10mm ○ ○ Plan Achromatic BD100X/0.80 WD=3.00mm ○ ○ Stage Double layers stage: 189×160mm ● ● Moving range: 80×50mm Nosepiece Quadruple with DIC ● ● Condenser Swing type NA=1.25 Abbe condenser with iris ● ● diaphragm and filter Focusing System Coarse and fine focusing adjustment range: 25mm ● ● Illumination Reflection light: 12V/50W AC85~230V ● ● Transmission light: 12V/50W AC85~230V ● ● Accessories Polarizer ● ● Analyzer ● ● XJM700 XJM700 XJM700 Inverted metallurgical microscope provide multiple function as your need. At present it is the biggest voulume style in all China microscope manufacture. While it also can be with CCD and digital camera installed on trinocular head. Parts Specifications XJM700 Optical System Infinite Plan Optical System F=200mm ● Seidentopf trinocular head, interpupillary distance 52~75mm, 45° ● Viewing Tube inclined, diopter adjustable. WF10X/20, High eye-point up to 21mm. ●● WF10X/22, High eye-point up to 21mm. ○ Eyepiece WF16X/14mm ○ WF10X/20mm with reticule ○ Nosepiece Quintuple, Inward facing. ● Plan Achromatic 4X/0.10 WD=12.86mm ○ Plan Achromatic 10X/0.25 WD=9.67mm ● Plan Achromatic 20X/0.40 WD=7.97mm ● Objectives Plan Achromatic 100X/1.25(S,O) WD=0.17mm ○ Long working distance Plan Achromatic 50X/0.60 WD=2.40mm ● Long working distance Plan Achromatic 80X/0.75 WD=1.70mm ● Fixed stage: 240×260mm, low-position co-axial flexible adjusting ● handle, moving range:135×85mm Stage Double layers stage: 350×208mm,moving range: 50×50mm ， ○ low-positioned co-axial flexible adjusting handle. 12V 50W halogen lamp ● 12V 50W Osram halogen lamp ○ Illumination 12V 100W halogen
Load more

Recommended publications
  • Final Report 2040 Freight Industry Level Forecasts
    Final Report 2040 Freight Industry Level Forecasts prepared by Cambridge Systematics, Inc. with Anne Strauss-Wieder, Inc. Parsons Brinckerhoff Rutgers, The State University of New Jersey June 30, 2012 Disclaimer The preparation of this report has been financed in part by the U.S. Department of Transportation, North Jersey Transportation Planning Authority, Inc., Federal Transit Administration and the Federal Highway Administration. This document is disseminated under the sponsorship of the U.S. Department of Transportation in the interest of information exchange. The United States Government assumes no liability for its contents or its use thereof. Final Report Table of Contents Acronym Glossary .......................................................................................................... v 1.0 Introduction ......................................................................................................... 1-1 2.0 Data Collection and Validation ....................................................................... 2-1 3.0 Freight Drivers .................................................................................................... 3-1 4.0 Industry-Level Freight Forecasts...................................................................... 4-1 5.0 Freight Factors and Trends ................................................................................ 5-1 6.0 Freight Forecasting Tool .................................................................................... 6-1 7.0 2040 Freight Forecast Findings ........................................................................
    [Show full text]
  • Information Industry: Characteristics and Mechanism for the Development
    Information Industry: Characteristics and Mechanism for the Development Saiful Farik Mat Yatin, Zulkifli Mohammed, Ahmad Affendi Mohd Nasir, Mohd Mustafa Kamal Abdul Wahid, Charles A/K Kiroh To Link this Article: http://dx.doi.org/10.6007/IJARPED/v7-i3/4359 DOI: 10.6007/IJARPED/v7-i3/4359 Received: 15 June 2018, Revised: 29 June 2018, Accepted: 13 July 2018 Published Online: 23 July 2018 In-Text Citation: (Yatin, Mohammed, Nasir, Wahid, & Kiroh, 2018) To Cite this Article: Yatin, S. F. M., Mohammed, Z., Nasir, A. A. M., Wahid, M. M. K. A., & Kiroh, C. A. (2018). Information Industry: Characteristics and Mechanism for the Development. International Journal of Academic Research in Progressive Education and Development, 7(3), 200–210. Copyright: © 2018 The Author(s) Published by Human Resource Management Academic Research Society (www.hrmars.com) This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode Vol. 7, No. 3, July 2018, Pg. 200 - 210 http://hrmars.com/index.php/pages/detail/IJARPED JOURNAL HOMEPAGE Full Terms & Conditions of access and use can be found at http://hrmars.com/index.php/pages/detail/publication-ethics International Journal of Academic Research in Progressive Education and Development Vol.
    [Show full text]
  • Research on Information Industry Innovation Model Under the Background of Integration of Industrialization and Informatization
    ·588· Proceedings of the 7th International Conference on Innovation & Management Research on Information Industry Innovation Model under the Background of Integration of Industrialization and Informatization Huang Jinsong School of Economics, Huazhong University of Science and Technology, Wu Han, P.R.China, 430074, (E-mail: [email protected]) Abstract The development of information industry innovation is an important driving force to promote adjustment of national industrial structure, the integration of industrialization and informatization has brought new opportunities and challenges to the development of information industry innovation. This paper defines the basic content of the information industry innovation, describes the relationship among integration of industrialization, informatization and information industry innovation, based on which analyses main content and models of the information industry innovation. Key words Integration of industrialization and informatization; Information industry; Innovation 1 Introduction It is a hot new research on industry innovation. Different scholars from different angles gave various interpretations on the connotation of industry innovation. It is generally believed that the concept of industry innovation was first proposed by the British economist, Freeman (1997)[1]. He believed that industry innovation including skills and technology innovation, product innovation, process innovation and management innovation and market innovation. Industry innovation includes sub-macro and micro
    [Show full text]
  • Research on the Industrial Integration of the Tourism Industry in Xi'an from the Panoramic View
    2018 5th International Conference on Business, Economics and Management (BUSEM 2018) Research on the Industrial Integration of the Tourism Industry in Xi’an from the Panoramic View Jian Xin Xi’an International Studies University, Xi'an, Shaanxi 710128 Keywords: panoramic view; Xi’an tourism; industrial integration Abstract: In order to make an overall developmental planning for taking advantage of tourist resources and promote the development of the tourism industry of Xi’an, it is necessary to research the industrial integration model of Xi’an from the panoramic view, and to integrate the cultural tourism, the sports tourism, the agricultural tourism, and the other industries systematically such as agriculture industry, primary industry, financial industry, information industry; it is also necessary to make a perfect macro adjusting and controlling planning of the tourism industry in Xi’an so as to promote the tourism industry in future. According to relevant documents, this paper researches the industrial integration model of tourism so as to solve some problems in the development of Xi’an tourism industry. As the development of economy and relevant policies, at the present stage, the tourism industry of Xi’an has been greatly developed than before, however, as its further development, there are still many actual dilemmas. During the development of the tourism industry, it is lack of scientific and overall planning, and the integration among the different industries is seriously insufficient, and the standard industrial chain has not been formed, and these factors have badly restricted the sustainable development of tourism industry in Xi'an. In order to optimize the industrial developmental structure of the tourism industry in Xi’an, it is necessary to develop the tourism industry of Xi’an from the panoramic view, and to research the industrial integration model of the tourism industry in Xi’an systematically, so as to find out the appropriate developmental path for the tourism industry in Xi’an and promote the further development of the local economy.
    [Show full text]
  • Present State and Trends of the Geoinformation Industry in China
    Sustainability 2015, 7, 2871-2884; doi:10.3390/su7032871 OPEN ACCESS sustainability ISSN 2071-1050 www.mdpi.com/journal/sustainability Review Present State and Trends of the Geoinformation Industry in China Hui-Feng Zhang 1,2, Qing-Yun Du 1 and Chao-Fei Qiao 2,* 1 School of Resource and Environmental Science, Wuhan University, 129 Luoyu Road, Wuhan 430079, China; E-Mails: [email protected] (H.-F.Z.); [email protected] (Q.-Y.D.) 2 Development Research Center of National Administration of Surveying, Mapping and Geoinformation of China, 28 Lianhuachixi Road, Beijing 100830, China * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +86-10-6388-1536; Fax: +86-10-6388-1541. Academic Editor: Marc A. Rosen Received: 28 December 2014 / Accepted: 10 February 2015 / Published: 9 March 2015 Abstract: The geoinformation industry is a high-tech service industry based on modern surveying and mapping technologies, remote sensing technologies and satellite navigation and positioning technologies. In China, the geoinformation industry is an emerging strategic industry that has rapidly developed; it has played an increasingly important role in the economy and society. This essay briefly introduces the present state of the international geoinformation industry. The state of the geoinformation industry enterprises in China from 2011 to 2013 is introduced. Although this industry has greatly progressed in China, problems and limitations still exist. The structure of the industry is not sustainable. The innovation capacity of Chinese enterprises is weak. Various market demands, increasing social investments, rapid progress in surveying, mapping and geoinformation technology and attention from the government are the main driving factors in this industry.
    [Show full text]
  • How Do Professional Engineers Use Information Compared to Undergradutes, and How Can Libraries Prepare Students and Support Engineers for Future Success?
    Purdue University Purdue e-Pubs Proceedings of the IATUL Conferences 2018 IATUL Proceedings How do professional engineers use information compared to undergradutes, and how can libraries prepare students and support engineers for future success? Margaret Phillips Purdue University Michael Fosmire Purdue University Jing Lu Purdue University Kristin Petersheim Caterpillar Inc. (USA) Laura Turner Caterpillar Inc. (USA) Margaret Phillips, Michael Fosmire, Jing Lu, Kristin Petersheim, and Laura Turner, "How do professional engineers use information compared to undergradutes, and how can libraries prepare students and support engineers for future success?." Proceedings of the IATUL Conferences. Paper 4. https://docs.lib.purdue.edu/iatul/2018/beyondnow/4 This document has been made available through Purdue e-Pubs, a service of the Purdue University Libraries. Please contact [email protected] for additional information. HOW DO PROFESSIONAL ENGINEERS USE INFORMATION COMPARED TO UNDERGRADUTES, AND HOW CAN LIBRARIES PREPARE STUDENTS AND SUPPORT ENGINEERS FOR FUTURE SUCCESS? Margaret Phillips, Michael Fosmire, & Jing Lu [email protected], [email protected], [email protected] Purdue University, United States of America Kristin Petersheim & Laura Turner [email protected], [email protected] Caterpillar Inc., United States of America Abstract Librarians at Purdue University seek to develop engineering graduates who are effective information users. Similarly, information specialists at Caterpillar Inc. are concerned with how well new hires
    [Show full text]
  • Gender and the Games Industry: the Experiences of Female Game Workers
    Gender and the Games Industry: The Experiences of Female Game Workers by Marsha Newbery BA., University of Winnipeg, 1994 Thesis Submitted In Partial Fulfillment of the Requirements for the Degree of Master of Arts in the School of Communication Faculty of Communication, Art & Technology © Marsha Newbery 2013 SIMON FRASER UNIVERSITY Spring 2013 Approval Name: Marsha-Jayne Newbery Degree: Master of Arts (Communication) Title of Thesis: Gender and the Games Industry: The Experiences of Female Game Workers Examining Committee: Chair: Frédérik Lesage Assistant Professor Alison Beale Senior Supervisor Professor Catherine Murray Supervisor Professor Leslie Regan Shade External Examiner Associate Professor, Faculty of Information, University of Toronto Date Defended/Approved: February 8, 2013 ii Partial Copyright Licence iii Ethics Statement The author, whose name appears on the title page of this work, has obtained, for the research described in this work, either: a. human research ethics approval from the Simon Fraser University Office of Research Ethics, or b. advance approval of the animal care protocol from the University Animal Care Committee of Simon Fraser University; or has conducted the research c. as a co-investigator, collaborator or research assistant in a research project approved in advance, or d. as a member of a course approved in advance for minimal risk human research, by the Office of Research Ethics. A copy of the approval letter has been filed at the Theses Office of the University Library at the time of submission of this thesis or project. The original application for approval and letter of approval are filed with the relevant offices. Inquiries may be directed to those authorities.
    [Show full text]
  • Identification of Determinants of Creative Activity Sectors Development in Polish Regions on Example of West Pomeranian Voivodship
    Human Resources Management & Ergonomics Volume VII 1/2013 IDENTIFICATION OF DETERMINANTS OF CREATIVE ACTIVITY SECTORS DEVELOPMENT IN POLISH REGIONS ON EXAMPLE OF WEST POMERANIAN VOIVODSHIP ANETA SOKÓŁ Abstract Currently, it is more and more noticeable that development of regions involves using endogenous resources and potential. Here, a significant consideration is given to development of factors of intangible nature. In this context, literature of a subject frequently presents influence of intangibles on development of regions; however, analysis of the creative sector, which significance in creating value added in the region seems to be unquestionable, is rare. In reference to aforementioned, the article is focused on presenting influence of this sector on development of Zachodniopomorskie Province. Verification of set goals was conducted based on analysis of literature of a subject and surveys conducted in the group of entrepreneurs operating in SME in the creative industries. It may be said that development of the creative sector in regions depends on many factors with direct or indirect influence. There is emphasized the significance of this phenomenon in economic processes indicating its superior role in reference to financial capital, which may be measured. For more effective development of discussed sector in Polish regions, some actions should be taken in order to increase activity of business entities acting within the creative industries on a given territory, but in particular it refers to: facilitating access to external financing sources of research and development operations, creating function of Ambassadors of Creativity, supporting development of infrastructure/tools, which allow development of a creative sector, supporting development of the information society, focusing scientific research environment on the purpose of creativity development, promoting cooperation of world of scientists with world of a creative sector, propagating benefits resulting from cooperation within creative sectors among business entities, etc.
    [Show full text]
  • Montage Af Nr 3-2010 .Indd
    A Service of Leibniz-Informationszentrum econstor Wirtschaft Leibniz Information Centre Make Your Publications Visible. zbw for Economics Sigurdardottir, Margrét Sigrún Doctoral Thesis Dependently independent: Co-existence of institutional logics in the recorded music industry PhD Series, No. 3.2010 Provided in Cooperation with: Copenhagen Business School (CBS) Suggested Citation: Sigurdardottir, Margrét Sigrún (2010) : Dependently independent: Co- existence of institutional logics in the recorded music industry, PhD Series, No. 3.2010, ISBN 9788759384121, Copenhagen Business School (CBS), Frederiksberg, http://hdl.handle.net/10398/7992 This Version is available at: http://hdl.handle.net/10419/208738 Standard-Nutzungsbedingungen: Terms of use: Die Dokumente auf EconStor dürfen zu eigenen wissenschaftlichen Documents in EconStor may be saved and copied for your Zwecken und zum Privatgebrauch gespeichert und kopiert werden. personal and scholarly purposes. Sie dürfen die Dokumente nicht für öffentliche oder kommerzielle You are not to copy documents for public or commercial Zwecke vervielfältigen, öffentlich ausstellen, öffentlich zugänglich purposes, to exhibit the documents publicly, to make them machen, vertreiben oder anderweitig nutzen. publicly available on the internet, or to distribute or otherwise use the documents in public. Sofern die Verfasser die Dokumente unter Open-Content-Lizenzen (insbesondere CC-Lizenzen) zur Verfügung gestellt haben sollten, If the documents have been made available under an Open gelten abweichend von
    [Show full text]
  • 2020 Engineering Industry Economic Contribution
    2020 Engineering Industry Economic Contribution ACECResearchInstitute.org Table of Contents Overview 3 Introduction 3 Engineering and Architectural Services Industry Definition 3 Engineering and Architectural Industry U.S. Economic Contribution Methodology 5 Engineering and Architectural Services Data Sources 6 Engineering & Architectural Services by the Numbers 7 Providing Perspective: The True Impact of the Engineering Industry 8 How Does the Engineering and Architectural Industry Contribute to the U.S. Economy? 8 Promotes a Healthy Job Market 8 Represents a Vital Part of U.S. Construction & Infrastructure 8 Contributes to Businesses Beyond Construction 9 Helps Support Public Education & Other Government Services 9 Provides Relief for the Tax Burden of U.S. Households 9 Economic Data: Engineering and Architectural Industry Vs. Construction Activity 10 Economic Contribution: Engineering and Architectural Industry Vs. Construction 11 Engineering and Architectural Services Economic Contribution is Significant 13 Economic Contribution Bottom Line 13 Engineering and Architectural Services Economic Contribution by Industry and State 15 Engineering and Architectural Services Support More than 4.5 million American Workers 17 Engineering and Architectural Services Contribution to Federal, State, and Local Taxes 23 Appendix I: Glossary & Definitions 25 Appendix II: State by State Economic Contribution Results 30 About the ACEC Research Institute 32 About Rockport Analytics 32 *This report was updated on February 10, 2021 to reflect the most up-to-date state tax information. Changes are reflected to local tax data in the state map and table on page 24 and in the charts on Appendix II on pages 30-31. Overview Introduction The ACEC Research Institute commissioned a series of studies - the Industry Impact Series - to profile and analyze performance in the Engineering, Architectural, and Surveying Services Industry (A/E Services).
    [Show full text]
  • Draft Conference Program „Economic Growth in Europe“
    Conference Programme Fifth Conference on Recent Developments in Macroeconomics Date: June 23-24 2014 Venue: Centre for European Economic Research (ZEW) L7, 1 68161 Mannheim Germany Information: www.zew.de/macroconference2014 Centre for European Economic Research (ZEW), Mannheim The Centre for European Economic Research (ZEW) in Mannheim is a nonprofit and independent institute with the legal form of a limited liability company (GmbH). Founded in 1990 on the basis of a public-private initiative in the Federal State of Baden-Württemberg in co-operation with the University of Mannheim, ZEW is one of Germany's leading economic research institutes, and enjoys a strong reputation throughout Europe. The ZEW pursues four key objectives: - To conduct research of the highest quality - To provide exceptional economic policy advising - To train young economists, and - To inform the professional and lay public The Institute focuses on decision-makers in politics, economics, and administration, scientists in the national and international arena as well as the interested public. Regular interviews on the situation on the financial markets and the economic situation of the information industry as well as the large-scale annual study on innovation activities in the German economy are representative for the different types of information provided by ZEW. 1 AGENDA Monday, Room: 1 Room: 2 June 23 12.00 - 13.00 Registration Welcome and Clemens Fuest 13.00 - 13.15 Introduction (ZEW Mannheim) Yann Algan (Sciences Po 13.15 - 14.15 Keynote Speech Paris) 14.15
    [Show full text]
  • Innovation Research on the Development Path of Smart Tourism in Liaoning Province
    2018 5th International Conference on Business, Economics and Management (BUSEM 2018) Innovation Research on the Development Path of Smart Tourism in Liaoning Province Jianzhu Sun1, Lan Zhao2 1 Laoning institute of Science and Technology, Laoning, Benxi, 117004 2 Hebei College of Science and Technology, Hebei, Baoding, 071000 Keywords: innovation research; development path; tourism; Liaoning Province Abstract: In the new era, the development of China’s tourism industry has entered a new stage of massification and industrialization. The tourism model has also changed from “tourism” to “tourism in the whole city”. The development of new generation information technology such as big data, Internet of things, artificial intelligence, block chain, etc. is taken to promote the transformation of traditional tourism into smart tourism. This paper takes the status quo and problems of Liaoning smart tourism development belt as the entry point, and explores the development path and countermeasures of the next generation of smart tourism in Liaoning Province by analyzing the intrinsic needs of the development of smart tourism in Liaoning under the background of global tourism and big data. 1. Overview of the Overall Development of Smart Tourism in Liaoning Province In 2011, Dalian City applied to the National Tourism Administration for the pilot city of “Smart Travel” construction, and became the first batch of national pilot cities for Liaoning Province's smart tourism construction. It is also the focus of tourism development in Liaoning Province. From 2014 onwards, according to the requirements of the development of smart tourism in the country and Liaoning Province and the actual development of the tourism industry, the cities of Liaoning Province began to work on the construction of smart tourism.
    [Show full text]