[] - /Linix Commands

1. $ ssh username@servername used to login to server 2$ it prints present working directory 3$ -l listing the files in present directory 4$ ..takes you to previous Dir 5$ will create directory 6$ mkdir -p /home/user1/d1/d2/d3will create all the non-existing Dir’s 7$ opens for reading/editing 8$ display contents of file 9$ displays page by page contents of file 10$ file_namechecks pattern/word in file name specified 11$ shows first 10 lines of file_name 12$ creates a zero/dummy file 13$ file1 file2 creates link of file1 to file2 14$ Copy a file 15$ Move/rename a file or folder 16$ clearclears the scree 17$ whoDisplays logged in user to the system. 18$ file shows what of file it is like 19$wwill display more info abt the users logged in 20$ -efshows process 21$ which shows if the file_name/command exists and if exists display the path 22$ will delete file specified$ rm * Delete all the files in the present directory (BE CAREFUL WHILE GIVING THIS COMMAND) 23$ . -type f -print -exec grep -i {} \;this is recursive grep$ find / - name -print 24$ shows last 10 lines of fileuse tail -f for continous update of file_name 25$ 777 changes file_name/directory permissions use –R switch for recursive 26$ owner:group changes owner & group for the file_name 27$ use –R for recursive 28$ rsh -l 29$ rcp file1 file2Copying file to remoter servers (This requires pre-configuration on remote servers like .rhosts & hosts.equiv) 30$ gunzip unzips file name$ gzip zips file_name 31$uncompress uncompresses filename 32$ compress compresses file_name 33$ bc -lbench calculator 40$ crontab -lShows the jobs running/scheduled for the current user.-->$crontab -l > present_cronjobs-->edit/add entries to present_cronjobs-->$crontab present_cronjobs (This will submit/resubmit the jobs in file presnt_cronjobs to CRON) 41$ $ at -l will show the at jobs scheduledat – schedule a job to run later timeat

Display the size of the files/folder 56$ -kwill show all the mounted filesystems. 57$ mountwill show all mounted file systems with additional info like large filesystem support etc 58$ pkginfo Gives/shows info about installed packages/software on system 59$ showrev –pshows all patches installed on system 60$ init 0will shutdown the system 61$ init 6will reboot the system (other init options are 1, 2, 3, 5 and S) 62$ l='ls -l'alias dir='ls -l|grep "^d"'alias p='pwd'alias c='clear'Short cuts for commonly used commands 63tar -cvf allfile.tar / copies all files under directory to allfile.tar$ tar -xvf allfile.tar /homeretrieves tar files to /home directory$ tar -tvf allfile.tar reads contents of allfile.tar 64$ /usr/sbin/ifconfig -aWill show the ip-address of the system.lo0 : loopback interfacehme0 : hundred MBPS n/w interfaceqfe0 : quad ehternet interface 65$ ping will ping and connectivity between your system and the hostname you give in the ping.you can also give ping 66$ set -o viWhile your shell is set to KSH use this command to display history of commands you are typingPress ESCAPE and k for showing previous commands 67$ ifconfig unplumb hme0 will disable ehternet interface hme0 68$ ifconfig plumb hme0 will enable hme 069$ mount will show the disks mounted and all partitions 70$ top shows all process and memory, cpu etc utilisation 71$ prtconf shows h/w, cpu, memory conf 72$ cd /usr/platform/sun4u/sbin/prtdiag -v shows additional configuration of memory, cpu speed etc.. 73$ sysdef shows system h/w, memory, and other internal configurable/tunable paramters 74$ sar –A system archive report, gives total system report for cpu, memory, disk, etcc 75$ mpstat shows multi cpu statistics like load on each cpu. 76$ iostat disk utilisation, cpu, io etc (iostat -xcM gives extented statistics of disk activity, cpu etc) 77$ vmstat memory and virtual memory utilization 78$ prstat shows process related statistics (present from solaris 2.7 and above) 79$ netstat shows network statistics 80$ lsof -p List the opened files for the process 81$ psrinfo gives processor/s information (online/offline) 82$ truss -p shows system calls and signals (useful when debugging process) 83$ stty erase ^Hsets backspace for deleting typed character 84$ shows printable strings in any type of file (binary, object, text etc) 85$ formatwill show all the disks configuration and partitions 86$ prtvtoc shows disk partition/geometry info 87$ uadmin 2 0 stops system immediately within 5 seconds(BE CAREFUL-- has to be to root) 88$ halthalts processor and reboots machine (BECAREFUL -- has to be root) 89$ adb debugging tool (for reading/debugging corefiles) 90$ dos2unix Convert dos formatted file to unix format 91$ mkfile 60m creates a filename of size 60mb which can be used for adding to swap space 92$ swap -a attaches the 60mb file to swap space (Very useful when swap space is running out) 93$ swap -l lists the swap contents 94$ 5waits for 5 seconds (useful in shell scripts) 95$ cat | '{print $1}'Prints the first field of the filed ($1, $2... can be used to display more fields) 96:1,$s///guse the above for global replacement of text in ascii files using vi editor 97:1,$s/^M//gremove Ctrl M character in text files using vi editor 98$ ksh –x Will compile the shell file line by line 99PS1=[$(hostname)]'$ORACLE_SID@$PWD>'Add this entry on .profile , you can view the hostname , $VARIABLE,current directort path 100$ipcs –mbWill provide the shared memory information 101$ mailx -s"" [email protected] < file.txtWill send this file.txt to a mail$ uuencode $file $file| mail -s "" [email protected] send the files as an attachment.

Important Directories to Remeber /  Root Directiry of unix system /usr/bin  This directory cotains all user level unix commands /usr/sbin  This directory Contains administrative related commands /usr/lib  This directory contains libraries /etc This directory contains system configuration files /var/adm  This directory contains system/application logs. /etc/rc.d  This directory Contains all startup scripts.There will be more of this kind rc2.d, rc3.d, rc0.d, rc5.d, rc6.d each directory has scripts which will run in its own run level. /opt In general, this directory used to install the 3rd party optional packages. /proc  This contains the snapshot of the system process and memory status.

Important files to remember /etc/passwd  it will show all the logins, home directories of the users. /etc/shadow  shows password encryption info and other user related info (only root has access to this file) /etc/system  This file has all n/w, h/w, memory etc tunable parameters /values/etc/inittab  This file defines the default run level of the system. /etc/hosts  This file contains the list of hosts/IP address /etc/services This file contains the port/service Name /etc/nsswitch.conf This file is used to configure which services are to be used to determine information such as hostnames, password files, and group /etc/ntpd.conf This file is used to configure Network Time Deamon /etc/inetd.conf This file tells which ports to listen to and what server to start for each port /etc/syslog.conf  This file have the configuration log file location and rotation sequence /etc/sudoers  contains the list of user names with the command allowed to execute by the user with additional privileges /etc/fstab  This file contains the list of file system and it mount points /etc/resolv.conf  contains the DNS server names for the name resolution

1) Editing the FILE:------*) To come to end of file:- G *) To delete the single word(can be free space):- dw *) to delete the current single char:- (Esc and x) *) To delete the complete line:- *) To right over in the file:- cw *) To remove the case sensitive:- :set ic *) To Enable the case sensitive:- :set noic *) Copy the complete line:- yy *) what ever copied:- p

2) GUN ZIP the file:------gzip file_name

Note:- While trying to download gunzip file from server to local machine it should be done in binary mode. Then it can exact using the wipzip software in WINDOWS .

After gzip, if we want to unzip the file then use the following. gunzip file_name

2.1) To unzip or gunzip the file :------gunzip file_name

Example:- gunzip XYZ_1.0_5.tar.gz

2.2) To untar the file:------tar -xvf file_name

Example:- tar -xvf XYZ_1.0_5.tar

3) To run the strings for the spawand program:------strings -a (shell_script_file_name) > (logfile.log)

Example:- strings -a GLPURGE > /home/partners-home/hex/preddy/phani1.log

3.1) Basic grep command:------Example:- grep 'DROP index' adwork001.log > /home/partners- home/xyz/preddy/dropindex.txt

Note:- grep command is just like the search for some specfic word in yourwindows file. In Windows Operating System, we use the (CTRL+F) and then we give the word we want to search. Similarly, grep is used for UNIX or LINUX Operating system. In the above Example, I am searching for the 'DROP index' Word in adwork001.log file. And I want all the finding of this search stored in some file. So, I have given the path and file name where it should save.

4) Specfic to some project:------To check the number lst files:------Example:- ls -altr *.lst | -l

Note:- If some folder have some specfic extension files, then we can count the number of that specfic extension files then we can use the above command. In the above example, I am searching for the 'lst' extension files count.To check the number of sql files with hit files :------grep '\.sql' *.lst | wc -l

Note:- Say, we have some .sql files names in all the lst files in some folder. Then we can use the grep command to count the sql file names.To check the number of files with hits in the lst file:------grep 'Number of files with hits : [1-9]' *.lst

Note:- You can also give the count of the files with the range. In the above example, I have givne the range from 1 to 9. If it find any number from this range then, it will get in the count.To create the file of the complete module :------grep '\.sql' *.lst > lst_sql_'module_name'.txt

Example:- grep '\.sql' *.lst > lst_sql_gl.txt

Note:- The above example to do the search and to the search results in some given file name.

5) To find the file in the current folder and subfolder:------find . -name ‘file_name*.sql’ -print

Example:- find -i . -name 'poXWFUNT*.sql' -print

Note:- POXWFUNT.sql is the file name which I want to search. 'i' in the above command indicates that, search should not be based on case sensitive.

6) To grep the file for a specific word:------grep -i 'WORD' FILE_NAME > log_file_name

Example:- grep -i 'ALTER table' adwork001.log > altertable.txt

7) To Know the PORT number of Env file:------setenv | grep PORT

Note:- Run the above command after login to Instance. And you have would have the read privileges for the file. This is mostly useful for people, are working in the Oracle Application.

7.1) For specfic session we can change the variable value:------setenv variable_name variable_value

Example :- The following was the current value.

INSTANCE_ENVID=XYZ12

(Used the following command to check the value (setenv | grep OBT)). setenv OBTADMIN_ENVID OBT_12

The above command has changed the value of the variable. ------

OBTADMIN_ENVID=OBT_12

Note:- If you from the session and then variable value will be revert back.

8) To know the path of the log and out files of the application:------>>cd $APPLCSF

There you will have the log and out folders.

You can also try the following command to know the value of the APPLCSF variable. env | grep log

9) Turn-on the application server:------./oraWebAndForms.sh start Instance name

Example:-

./oraWebAndForms.sh start XYZ12

Note:------1) XYZ12 is the Instane name. 2) After turnning the Database and concurrent manager up. still the application front end will not open. The you need to run the above script from the applmgr user

To login to different user:------sudo su - applmgr

Note:- applmgr is the superuser name. This username can depends on the DBA, what they have given at your Instance.

9.1) If you are getting 500 Internal error message after bounce back then try this:------Try to restart your application and restart your manage and see if it resolve the issue.

For the 12 Release, the above solution may not work. After you cleared _pages in R12, you'll need to recompile because the default mode is 'justrun' instead of 'recompile' as was in 11i.

I did the following while applmgr in my Instance XYZ12 env and the login now works:

1. cd $FND_TOP//115/bin 2. ./ojspCompile.pl --compile --flush -p 2

(You can check if you are able to open the application or not). If you are still facing the issue then try rebounce the application and see if it resolve the issue).

3. /home/applmgr/oraWebAndForms.sh bounce xyz12

(./oraWebAndForms.sh bounce zyx12)

Note:- You need to run the above script in the applmgr user sudo su - applmgr

10) To start or stop the Internal concurrent manager:------cd $ADMIN_SCRIPTS_HOME/

./adcmctl.sh start apps/apps

./adcmctl.sh stop apps/apps

Note:- This need to be run from applmgr user ----- sudo su - applmgr

11) To stop the database or start the database:------cd $ORACLE_HOME/appsutil/scripts/xyz12_server/

Note:- The above path is specfic to my server Instance.

To stop the database:- adstopdb.sql*

To start the database:- adstrtdb.sql*

Note:- This need to be run from Oracle user. ------sudo su - oracle

12) Converting all the tabs to space in the file:------By setting the following options in your ~/.vimrc file, when you use tabs, spaces are actually entered into the file, although it "feels" like there are tabs because backspaces work as they would with tabs.

You'll never have to worry about differing tabstop standards again. Try it out, I promise you’ll be completely sold! set softtabstop=4 set expandtab set shiftwidth=4

Note also that if you want to convert a file with tabs to all spaces, set the above options and then use: :retab!

13) To know the Operating system on server (unix):- >uname Example:------2007.08.06-3:18:03 preddy@oscar[6]/home/partners- home/xyz/phani/xyz_23Jul/abc/la/utils > uname

HP-UX

14) To know the Operating system on server from database:------begin dbms_output.put_line('Port String: '||dbms_utility.port_string); end;

15) Admin utility to compile all the invalid objects:------i) This utility is avilable for the applmgr user. Use the following command to login with applmgr user.

>>sudo su - applmgr ii) Choose the Intance and then use the following command to run the adadmin utility.

>>adadmin

{ Note:- It will ask for the $APPL_TOP path. If the default path is not the correct one then provide the correct path. It will ask for the Log file name. (Default name willl be (adadmin.log)). It will ask if you can be notified by email if a failure occurs. (Default will be set for NO). It will ask for the Batchsize (Default is 1000). It will ask for the correct database name. It will ask to enter the password for your 'SYSTEM' ORACLE schema.("manager" will be the password). (manager password will be only one you enter manually. Rest of things you take the default values.) It will ask to enter the ORACLE password of Application Object Library (default will be [APPS]). } iii) To will give the menu with different options. ------We will choose the "Compile/Reload Applications Database Entities menu" option. It will be 3 option normally. iv) To will again give the other set of menu optins. ------We will choose "Compile APPS schema" option to compile all the Invalid objects in APPS schema.

(Note:- You can also use $ORACLE_HOME/rdbms/admin/utlrp.sql (which will compile all invalid objects thru SVRMGRL.)).

17) To know apps password:------cd $ORACLE_HOME/reports60/server more CGIcmd.dat

You will find userid=APPS/apps_pass@Instance_name

Note:- If you have the FTP access for server files. Then we can know the Apps password.

18) QUOTA:------Say employees are allocated a certain amount of disk space on the file system for their personal files, say 1000Mb. If you go over your quota, you are given some 'n' days to remove excess files.

To check your current quota and how much of it you have used. For that you can use the following command. > quota -v

19) DF:- To find out how much space is left on the fileserver, use the following command. > df .

20) DU:-The du command outputs the number of kilobyes used by each subdirectory. Useful if you have gone over quota and you want to find out which directory has the most files. From your home-directory, use the following command.

> du -s * The -s flag will display only a summary (total size) and the * means all files and directories.

21) GZIP:------This reduces the size of a file, thus freeing valuable disk space. This is compress the file. Is it similar to the Winzip in the Windows Operating system.

Example:- > ls -l phani.txt note the size of the file using ls -l , then to compress phani.txt, use the following command.

> gzip phani.txt This will compress the file and place it in a file called phani.txt.gz To see the change in size, use ls -l again. To expand the file, use the gunzip command.

> gunzip phani.txt.gz This is similar to the Unzip the file in your Windows Operating system.

22) ZCAT:------zcat will read gzipped files without needing to uncompress them first. > zcat phani.txt.gz

If the text scrolls too fast for you, pipe the output though less . > zcat phani.txt.gz | less

23) FILE:- File classifies the named files according to the type of data they contain, for example ascii (text), pictures, compressed data, etc.. To report on all files in your home directory, use the following command. > file *

24) :------This command compares the contents of two files and displays the differences. Say you have a file called file1 and you edit some part of it and save it as file2. To see the differences use the following command. > diff file1 file2

25) ECHO:------echo $variable_value The value of the can get from the echo command.

Example:- echo $APPL_TOP

In the above command we get the APPL_TOP variable value set in the environment file. APPL_TOP is the environment variable in the environment file.

26) General Commands:------Command Meaning

ls list files and directories

ls -a list all files and directories

mkdir a directory

cd directory change to named directory

cd change to home-directory

cd ~ change to home-directory

cd .. change to parent directory

pwd display the path of the current directory

cp file1 file2 copy file1 and call it file2

mv file1 file2 move or rename file1 to file2

rm file remove a file

directory remove a directory

cat file display a file less file display a file a page at a time head file display the first few lines of a file tail file display the last few lines of a file grep 'keyword' file search a file for keywords

count number of lines/words/characters in wc file file command > file redirect standard output to a file command >> file append standard output to a file command < file redirect standard input from a file

pipe the output of command1 to the input command1 |command2 of command2 cat file1 file2 > file0 concatenate file1 and file2 to file0 sort data who list users currently logged in * match any number of characters ? match one character read the online manual page for a man command command whatis command brief description of a command match commands with keyword in their apropos keyword man pages ls -lag list access rights for all files chmod [options] file change access rights for named file command & run command in background

^C kill the job running in the foreground

^Z suspend the job running in the foreground bg background the suspended job jobs list current jobs fg %1 foreground job number 1

kill %1 kill job number 1

ps list current processes

kill 26152 kill process number 26152

Basic uses of find

How to find a file? $ find /export/home -name testfile How to find a file and its details? $ find /export/home -name testfile -exec ls -l {} \; How to find a file which is not modified since past 60 days? $ find /export/home -mtime +60 -exec ls -l {} \;

How to find a file which is not accessed since past 60 days? $ find /export/home -atime +60 -exec ls -l {} \;

How to find a directory $ find /var/adm -type d