Branchement Freebox Tv Revolution
Total Page：16
File Type：pdf, Size：1020Kb
Branchement freebox tv revolution Continue Your Freebox Revolution has a TV set called Freebox Player. It is specifically designed for multimedia apps and will be connected to the TV, so be sure to prepare a place nearby. To receive video and audio streams and stream them to your TV, Freebox Player must communicate with the Freebox server you previously installed. The latter must be operational (should show the time). This message is possible with freePlugs (provided) which, thanks to CPL (online current carrier), use the electrical network to move the data. Therefore, there is no need for the two cases to be placed in close proximity to each other. For example, your Freebox server could be in a room next to a desktop computer and computer, and the player in the next room next to the TV. Go to the suite to start installing. Once your Freebox Player is next to the TV, start installing it. Get a second black FreePlug (the first one you used to power the Freebox server); Prepare it as you did for the first one: connecting the dual cable (power - Ethernet) to FreePlug, its other 2 end on the player (Ethernet connector on the only ideal port, round power tip in port 12V) and cable branch on the opposite side of FreePlug; Connect the Player to the TV with the cables provided to select from it via HDMI or pertel connection. The HDMI cable connects HDMI ports with the back of the player and TV, the peritel cable connects the round tip on the player's Peritel port and the peritel socket to your TV's Peritel port. Whenever possible (if your TV is equipped with it) we strongly recommend that you use the HDMI connection. Your player is now connected to a TV that you can turn on and spread on an adapted channel that corresponds to your chosen connection (HDMI or Peritel). Now connect the FreePlug electrical outlet to the socket. FreePlug's light turns green after a few seconds. The Freebox Player firmware (internal software) is updated, and then an commissioning assistant appears on the screen. Get a Freebox remote; Remove a small plastic cover over the metal shell (the bottom of the remote control). This cache prevents batteries from coming into contact with them and therefore their wear and tear; Removing it instantly powering the remote control. Allow yourself to be guided by an interface that will tell you what to do with the remote control before you access the universe Tv. If the FreePlug diode doesn't turn green (frozen) after a few moments, it's because it doesn't communicate with other FreePlug. You then need to reassociate 2 FreePlugs (click to access the appropriate slide). Your Crystal Freebox has a body box (box 2) specifically designed for multimedia applications. It has to be near the TV to be connected to it. To receive video and audio streams and stream them to the TV, Box 2 must communicate with box 1, which must be workable (see time). This connection is possible with FreePlugs provided that, thanks to CPL (the current carrier), use an electrical network to move the data. Therefore, there is no need for the two cases to be placed in close proximity to each other. For example, your case 1 may be in a room next to a desktop computer and computer, while Case 2 is in the next room next to the TV. Before installing Case 2 (set-top box TV), make sure you have FreePlugs put together. If FreePlugs are well connected, you can start installing Box 2: Use the HDMI cable to connect Case 2 (Take 3) to the INTRODUCTION of HDMI (usually on the back of the TV). If the TV doesn't have an HDMI port or you don't have the appropriate cable, then use the peritone cable provided by connecting it to the teletest box 9 and the periton fork on the back of the TV: now turn on the TV and, thanks to the remote control, switch to the external output by pressing a button corresponding to the external channel (HDMI1, EXT1, AUX, etc., depending on the port on which you connect the cable) Bring the second FreePlug (first used on Case 1) and connect its cables to the Ethernet port in case 2 (take 4) and port 12V (take 12), not forgetting to remove the tip of the adapter from the power cable; your TV (if it's on the right channel) smooths the starting steps of the Freebox case. In addition, initialization steps are displayed in front of case 2: ETAPE 1, STEP 2, etc.; After the final restart, Case 2 displays FREE, RESEAU, VIDEO and finally ROCK'N'ROLL, indicating that your case is ready to use. Follow an interface that tells you what to do with the remote control before you access the Freebox TV universe. If the FreePlug diode doesn't light up green (frozen) after a few moments, it's because it doesn't with other FreePlug. You then need to reassociate 2 FreePlugs (click to access the appropriate slide). Your Freebox mini 4K has a TV teleco box called freebox Player Mini. It is specifically designed for multimedia apps (based on the Android TV system) and will be connected to the TV, so be sure to prepare a seat nearby. To receive video and audio streams and transfer them to the TV, Freebox Player Mini must communicate with the Freebox Server Mini that you previously installed. The latter must be operational (should show the time). This message is possible: using the (recommended) Ethernet cable; via CPL (online current carrier), thanks to the FreePlugs kit provided; wirelessly through a built-in WiFi device. If your two Freebox boxes aren't close, you'll need to opt for a connection via FreePlugs or WiFi. Go to the suite to start installing. Once your Freebox Player Mini is located next to the TV, let's start installing it. Bring a second FreePlug built into your Freebox package (another one is used for server case); Prepare it as you did for the first one (see illustration above); Then connect the Ethernet cable to the Ethernet port (6) on the back of the Player Mini, then the round power tip to the 12V (1); Connect Player Mini to your TV with the HDMI cable provided. The HDMI cable connects HDMI ports to the back of the Player Mini and your TV. Whenever possible (if your TV is equipped with it) we strongly recommend that you use the HDMI connection. Your mini player is now connected to a TV that you can turn on and spread on an adapted channel that corresponds to the HDMI connection. Now connect the FreePlug electrical outlet to the socket. The Mini player is on his way. The TV displays a series of logos. Moments later, a remote control assistant appears: Get a Freebox remote; Remove the plastic tab under the battery cover by gently pulling on it (this cache prevents the batteries from being in contact and therefore their wear; removing it will instantly power the remote control); Undo the remote control next to the Player's body (30cm); If the screen invites you, tap CLAVISHI FREE and MUTE (speaker) at the same time, until the small red diode on the remote control flashes quickly; The association procedure goes its own and then ends by inviting you to press the OK button. If you can't get to the end Combined procedure after several tests, restart the case by disabling it and then rebranching it (electric socket). Then repeat the operation. If you choose not to use FreePlugs provided, or if you don't have the ability to connect Player Mini to Server Mini via Ethernet cable, they should communicate via WiFi. Therefore, this step is optional. To connect the Player case to the server via WiFi: go to the Wi-Fi configuration button; Choose your personal WiFi network (information is displayed on Cardboard 1, you can also customize it from Freebox OS); Enter the relevant password (if the default password is complex, feel free to change it with Freebox); Confirm. You're connected. Freebox performs a number of updates and then automatically restarts; You are asked to choose the WiFi network again (the password is saved, you don't have to enter it again); A new Google screen appears. Remember: if possible, depending on the configuration of your home, choose to use FreePlugs or Ethernet cable provided you connect two boxes. This solution is also highly recommended in case of wifi usage problems. Freebox mini 4K uses Android TV. In fact, you can use Google services from your TV. If you don't want to use Google features, you can skip these steps and quickly access TV services. Choose the language of your choice and check with OK; The screen reminds you of the network you're connected to. If it's yours, choose Don't Change; Connect to a Google account: If you don't want to use Google services or don't have an account, go to the Ignore button. If you have an account, choose to use your phone or laptop to enter accounts from that device. Choose to use a password to enter credentials from the remote control; Allow yourself to follow the various instructions displayed on the screen; The setup is complete. Your Delta Freebox has a TV teleco box called Freebox Player. It is specifically designed for multimedia applications, will act as a home theater speaker and will be connected to the TV, so be sure to prepare a place nearby.