DOCSLIB.ORG

Technical Data Sheet Typhoon Blast™ All-Way Duster

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Technical Data Sheet Typhoon Blast™ All-Way Duster CHEMTRONICS TDS # 1624 Technical Data Sheet Typhoon Blast™ All-Way Duster PRODUCT DESCRIPTION TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Typhoon Blast™ All-Way Duster can be sprayed right- side up and upside down emitting a high pressure blast Boiling Point - 2 °F / -19 °C that cleans electronics without scratching delicate surfaces. This compressed gas duster offers exceptionally Internal Pressure 47 psia @ 70 °F low global warming impact (GWP = 6) when compared to traditional dusters utilizing HFC-134a (GWP = 1300) or Vapor Density (air=1) 4.0 HFC-152a (GWP = 140)*. This moisture free and oil free @ 77°F duster provides the cleanest and most efficient, non- Solubility in Water 0.10% by weight contact method available for particle removal. It is also efficient as a means to quickly remove slow-drying @ 77°F F/1 atm solvents. Specific Gravity 1.17 (water = 1 @77°F) . High pressure duster sprays any direction, even upside down Evaporation Rate >1 (butyl acetate=1) . Ideal for particle removal and contamination control . Useful for drying and removing solvents from Appearance Clear, Colorless surfaces Liquified Gas . Ultra-low global warming impact of 6 . Nonflammable Odor Slight Ethereal . Nonabrasive and Noncorrosive, Leaves no residue Global Warming Potential 6.0* . Ultra-pure, filtered to <0.2 microns . CFC, HCFC and HFC free Flash Point (TCC) None . VOC free Shelflife 5 years TYPICAL APPLICATIONS RoHS/WEEE Typhoon Blast™ All-Way Duster is engineered for all Status aspects of electronic equipment maintenance and is particularly suited for applications involving: . Audio/Video Equipment *Global warming potential (GWP) is calculated based on a 100 . Computers and Other Electronic Equipment year time horizon. Carbon dioxide has a GWP of 1. Telephone Junction Panels . Network Routers and Switches COMPATIBILITY . Lenses and Optical Surfaces Typhoon Blast™ All-Way Duster is generally . Office Equipment, Paper Shredders, Fax Machines and Printers compatible with most materials used in printed . Laboratory Instruments circuit board fabrication, including sensitive plastics . Photo Equipment and compounds. As with any duster/cleaner, . Printed Circuit Boards compatibility must be determined on a non-critical . Electrical Connectors and Contacts area prior to use. Material Compatibility ENVIRONMENTAL IMPACT DATA Buna-N Excellent Graphite Excellent ENVIRONMENTAL IMPACT DATA HDPE Excellent LDPE Excellent CFC 0.0% VOC 0.0% HCFC 0.0% HFC 0.0% Lexan Excellent Neoprene Excellent CL Solv. 0.0% ODP 0.00 Cross-Linked PE Excellent Polyacrylate Excellent CFC, HCFC, CL. SOLV., VOC, and HFC numbers Polystyrene Excellent shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the PVC Excellent Montreal Protocol and U.S. Clean Air Act of 1990. The Silicone Rubber Excellent ODP of this product is 0.0. It is the sum of the ODP of Teflon Excellent the substances that may contribute to the depletion of Viton Excellent stratospheric ozone, based upon the weight of each substance in the product’s formulation. VOC PERFORMANCE consideration is based on the materials being not photochemically reactive by Commonly Used Pressure PSIG / Temperature F 100 Standards (material supplier). - P 75 NOTE: S - This information is believed to be accurate. It is I 50 intended for professional end users having the skills A - to evaluate and use the data properly. 25 CHEMTRONICS does not guarantee the accuracy - of the data and assumes no liability in connection 0 40 50 60 70 80 90 100 with damages incurred while using it. Temperature F Chemtronics® is a registered trademark of ITW Chemtronics. All rights reserved. Typhoon Blast™ is a trademark of USAGE INSTRUCTIONS ITW Chemtronics. All rights reserved. For industrial use only. All other trademarks herein are trademarks or registered Read MSDS carefully prior to use. trademarks of their respective owners. No special surface preparation is required prior to MANUFACTURED BY: using Typhoon Blast™ All-Way Duster. Direct high ITW CHEMTRONICS pressure spray onto the area to be cleaned to remove 8125 COBB CENTER DRIVE dust, dirt and other contaminant. For optimum KENNESAW, GA 30152 performance and pin point control, use with the 1-770-424-4888 REV. A (04/11) attached extension tube. AVAILABILITY DISTRIBUTED BY: ES1624 8 oz. All-Way Aerosol TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. Nothing Cleans Like Chemtronics Choose the Chemtronics duster that's best for your application. Typhoon Blast™ and Typhoon Surge™ — New Dusters with Ultra-Low Global Warming. Typhoon Blast™ Duster Typhoon Blast™ 70 Duster Responding to the The ultra-low GWP duster with the The powerful and economical, ultra-low new global warming BIGGEST blast to clean anything fast GWP duster with the BIGGER blast regulations has just I Ultra-low Global Warming Potential I Ultra-Low GWP I Most cleaning strength I Safe on plastics become much easier. I Safe on plastics I Nonflammable I Nonflammable I Ozone safe ™ Typhoon Blast and I Ozone safe I Filtered to 0.2 microns ™ I Filtered to 0.2 microns Typhoon Surge are the Applications: newest class of dusters from Applications: I Cleaning particles from contacts and relays I Removing dust build up from circuit boards I Removing debris from precision optics ® ITW Chemtronics , specifically I Cleaning insulating debris from pin connectors formulated to minimize the use I Removal of entrapped solvent from under ES1025 10 oz. aerosol surface mount devices of global warming compounds. They are formulated with HFO- ES1024 10 oz. aerosol Typhoon Surge™ 1234ze, a new material that The economical duster with an ultra- low GWP has a significantly lower global Typhoon Blast™ All-Way Duster I Ultra-Low GWP warming potential (GWP) than I The ultra-low GWP duster that Safe on plastics I Nonflammable previous materials used for sprays in any direction with the I Ozone safe dusters. This new material has BIGGEST blast to clean anything fast I More Economical a GWP of 6, and compares I Ultra-low Global Warming Potential Applications: very favorably to HFC-134a I All-Way spray system I Removing debris from keyboards, office (GWP of 1300) and HFC-152a I Most cleaning strength equipment I Safe on plastics I Removing surface contamination from A/V (GWP of 140). In addition, I Nonflammable equipment since it has a short atmospheric I Ozone safe I Filtered to 0.2 microns ES1026 8 oz. aerosol lifetime with a very low Applications: photochemical ozone creation I Cleaning fiber optic connectors and bulkheads potential, it is not expected to I Removing particles from mirror assemblies I Removing contamination from sensitive be classified as a VOC. surfaces ES1624 8 oz. aerosol Chemtronics Dusters are microscopically clean, oil and moisture free sources of "canned air" developed for applications where safe, ultra-pure cleaning is required. Compact and portable, Chemtronics dusters deliver powerful jet action to instantly remove particles from even the most inaccessible areas. Dusters are available in a variety of sizes, made with a variety of materials, and with a variety of power. So which one is right for you? Typhoon Blast™ Ultrajet® Duster The ultra-low GWP duster with the BIGGEST The duster with the BIGGEST blast to clean The economical, regular strength duster blast to clean anything fast anything fast Regular Cleaning Strength Ultra-Low GWP Most Cleaning Strength Nonflammable More Cleaning Strength Nonflammable More Economical Nonflammable ES1024 10 oz. aerosol ES1020 10 oz. aerosol ES1017 10 oz. aerosol ES1020K 10 oz. aerosol kit ES1217 8 oz. aerosol ES1020R 10 oz. aerosol refill ES1617 12 oz. aerosol Typhoon Blast™ All-Way The ultra-low GWP duster that sprays ® ™ in any direction, with the BIGGEST Ultrajet All-Way 152A Blast blast to clean anything fast The duster that sprays in any The economical extra strength general- direction with the BIGGEST blast to purpose duster Ultra-Low GWP clean anything fast All-Way Spray More Cleaning Strength Nonflammable All-Way Spray Flammable Most Cleaning Strength More Economical ES1624 8 oz. aerosol Nonflammable ES1029 10 oz. aerosol ES1620 8 oz. aerosol Typhoon Blast™ 70 The powerful and economical,ultra-low GWP 152A Duster duster with the BIGGER blast Ultrajet® 70 The economical regular strength general- The powerful, economical duster with a BIGGER purpose duster Ultra-Low GWP blast than competitive dusters Nonflammable Regular Cleaning Strength More Cleaning Strength More Cleaning Strength Flammable More Economical Nonflammable Most Economical More Economical ES1025 10 oz. aerosol ES1027 10 oz. aerosol ES1015 10 oz. aerosol Typhoon Surge™ The economical duster with an ultra-low GWP Ultra-Low GWP Nonflammable More Economical ES1026 8 oz. aerosol Which Chemtronics duster is best for your application? Blasting Plastic Ozone All-Way Force Internal VOC** Use On Live Use On Power Safe Flammable Safe Spray Purity Contents Generated* Pressure Content GWP*** Circuits De-energized Circuits Specially for Typhoon XX Strength P N O No 99.99% HFO-1234ze 1.08 N 47 PSIG 0.00% 6 Yes Yes Removing dust, dirt and debris from circuits, connectors, relays, electrical panels, and all forms Blast™ Filtered to o 0.2 microns W Typhoon XX Strength P N O Yes 99.99% HFO-1234ze 1.19 N 47 PSIG 0.00% 6 Yes Yes Spraying in any direction without dispensing liquid. Cleaning fiber optic connectors and bulkheads. Blast™ Filtered to W All-Way 0.2 microns Typhoon X Strength P N O No 99.99% HFO-1234ze 0.93 N 47 PSIG 0.00% 6 Yes Yes Cleaning particles from contacts and relays. Removing debris from precision optics. Removing Blast™ 70 Filtered to p 0.2 microns o Typhoon Regular P N O No 99.99% HFO-1234ze 0.64 N 47 PSIG 0.00% 6 Yes Yes Removing debris from paper shredders and office equipment.
Load more

Recommended publications
  • ACTION: Original DATE: 09/20/2012 8:59 AM
    ACTION: Original DATE: 09/20/2012 8:59 AM 3745-112-01 Definitions. [Comment: For dates on non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see the last paragraph (C) of this rule titled "Incorporation by referenceReferenced Materials."] (A) Except as otherwise provided in this rule, the definitions in rule 3745-15-01 of the Administrative Code shall apply to this chapter. (B) As used in Chapter 3745-112 of the Administrative Codethis chapter. (1) "Adhesive" means any product that is used to bond one surface to another by attachment. Adhesive does not include products used on humans and animals, adhesive tape, contact paper, wallpaper, shelf liners, or any other product with an adhesive incorporated onto or in an inert substrate. For contact adhesive, construction, panel, and floor covering adhesive, and general purpose adhesive only, adhesive also does not include units of product, less packaging, which weigh more than one pound and consist of more than sixteen fluid ounces. This limitation does not apply to aerosol adhesives. (2) "Adhesive remover" means a product designed to remove adhesive from either a specific substrate or a variety of substrates. Adhesive removers do not include products that remove adhesives intended for use on humans or animals. (a) "Floor or wall covering adhesive remover" means a product designed or labeled to remove floor or wall coverings and associated adhesive from the underlying substrate. (b) "Gasket or thread locking adhesive remover" means a product designed or labeled to remove gaskets or thread locking adhesives.
    [Show full text]
  • Walmart Faces Class Action Over Inhaling of Dust Spray
    CASE 0:20-cv-01473-NEB-TNL Document 1 Filed 06/26/20 Page 1 of 75 UNITED STATES DISTRICT COURT DISTRICT OF MINNESOTA Natalie A. Chairez and Samantha G. Chairez, Case No. ______________ Plaintiffs, COMPLAINT AND DEMAND vs. FOR JURY TRIAL AW Distributing, Inc., Walmart Inc., Wal-Mart Stores, Inc., Wal-Mart Stores East, LP, Wal- Mart Stores East, LLC, and John Doe Company Defendants #1–10, Defendants. COME NOW, Plaintiffs, who for their causes of action against Defendants, state and allege: INTRODUCTION 1. Inhalant abuse has been known and prevalent in the United States for decades. Many common household products are used to get high because they are cheap and easily accessible, such as aerosols, glue, cleaning fluids, and gasoline, as examples. 2. One type of inhalant that people commonly abuse to get high is computer dust remover sprays. These products are compressed gas in a can that are used to spray off dust and debris from whatever surface is being cleaned. However, they contain a gas—difluoroethane—that, if inhaled, causes the person to lose consciousness and control of the bodily movements nearly immediately. CASE 0:20-cv-01473-NEB-TNL Document 1 Filed 06/26/20 Page 2 of 75 3. These dust removers are cheap and available at retail locations throughout the United States, meaning anyone with a few dollars can purchase the product to get high. Dust removers are popular among inhalant abusers, so much so that the companies who design, manufacture, distribute, and sell these products profit greatly as a result. Manufacturers, distributors, and sellers of dust removers— such as AW Distributing, Inc., Walmart Inc., Wal-Mart Stores, Inc., Wal-Mart Stores East, LP, and Wal-Mart Stores East, LLC (collectively “Defendants”)—know that people inhale their dust removers to get high.
    [Show full text]
  • Plumbing Maintenance
    Plumbing Maintenance Air Brush Brakleen Builders Fill Cleaners Degreasers Contact Adhesives Corrosion Prevention Epoxy Greases Hand Cleaner Label Remover Lubricants Paints Repair Patch Rust Converter Sealants Solvent Spray Bottle Zinc PVC Pipe Cement Panel Adhesive Leak Detector For the quick detection of gas and air leaks CRC Leak Detector is formulated for the quick and easy site detection of gas and air leaks. The water-based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak. Features & Benefits: • Finds leaks fast – Highlights all leaks, even under low pressure • Aerosol package – Enables fast and easy application with no waste or spillage • Water-based formula – No oils, silicones or harmful solvents • No odour • Non-flammable Uses: • For use on refrigeration units, air conditioning systems, exhausts, pipes, valves, screw connectors, welding seams, compressed air lines and compressors • Can be used for almost all types of gases – Compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen, carbon dioxide, chlorine gas, hydrogen, town gas, nitrous oxide etc. Code Product Name Size UOM Units Per Pack 14503 Leak Detector 510g Each 6 Air Brush Gas Duster for Safe Removal of Dust, Lint and Paper Residue CRC Air Brush supplies a powerful burst of compressed pure propellant gas to safely remove dust and lint from all delicate precision equipment and hard-to-reach areas. It is versatile and handy and should be part of every servicing kit – ideal for off-site servicing when compressed air is not available.
    [Show full text]
  • Technical Data Sheet Ultrajet
    CHEMTRONICS® TDS # 1020 Technical Data Sheet Ultrajet® PRODUCT DESCRIPTION TYPICAL PRODUCT DATA AND ® Ultrajet compressed gas duster is a high PHYSICAL PROPERTIES pressure duster that cleans electronics Boiling Point -15.7°F without scratching delicate surfaces. This duster/ cleaner is nonflammable, residue-free Vapor Density (air=1) 3.18 and won’t scratch delicate surfaces. @ 77°F Solubility in Water 0.10% by weight Filtered to 0.2 microns @ 77°F F/1 atm Nonflammable Specific Gravity 1.21 Leaves no residue (water = 1 @77°F) High pressure for contamination control Nonabrasive Evaporation Rate >1 Excellent material compatibility (butyl acetate=1) Penetrates hard to reach areas Appearance Clear, Colorless Contains no ozone depleting compounds Liquified Gas Odor Slight Ethereal TYPICAL APPLICATIONS Surface Tension 7.8 ® Ultrajet duster is engineered for all aspects (dynes/cm @77°F) of electronic equipment maintenance and is particularly suited for applications involving: Flash Point (TCC) None Shelflife 5 years Audio/Video Equipment Computers and Other Electronic RoHS/WEEE Equipment Status Fax Machines Laboratory Instruments Photo Equipment COMPATIBILITY Printed Circuit Boards Ultrajet® is generally compatible with most Printers materials used in printed circuit board Surface Mount Devices fabrication, including sensitive plastics and compounds. As with any duster/cleaner, compatibility must be determined on a non- critical area prior to use. Material Compatibility Buna-N Excellent Graphite Excellent HDPE Excellent LDPE Excellent Lexan™ Excellent Neoprene Excellent Cross-Linked PE Excellent ENVIRONMENTAL IMPACT DATA Polyacrylate Excellent Polystyrene Excellent ENVIRONMENTAL IMPACT DATA PVC Excellent Silicone Rubber Excellent CFC 0.0% VOC 0.0% Teflon™ Excellent HCFC 0.0% HFC 100.0% Viton™ Excellent CL Solv.
    [Show full text]
  • 310 CMR 7.25, Best Available Controls for Consumer and Commercial Products
    COMMONWEALTH OF MASSACHUSETTS DEPARTMENT OF ENVIRONMENTAL PROTECTION 310 CMR 7.00 AIR POLLUTION CONTROL REGULATIONS 310 CMR 7.25 U BEST AVAILABLE CONTROLS FOR CONSUMER AND COMMERCIAL PRODUCTS 7.25: U Best Available Controls for Consumer and Commercial Products (1) Purpose. 310 CMR 7.25 applies to and sets forth requirements for the control of volatile organic compound emissions from the use of consumer and commercial products as defined in Title I Part D Subpart 2 Section 183(e)(1)(B) of the federal Clean Air Act. [(2) through (10): Reserved] (11) Architectural and Industrial Maintenance (AIM) Coatings. (a) Applicability. 1. Except as provided in 310 CMR 7.25(11)(a)2., the requirements of 310 CMR 7.25(11) apply to any person who, on or after January 1, 2009, supplies, sells, offers for sale, blends for sale, or manufactures any architectural coating listed in 310 CMR 7.25(11)(b) for use within Massachusetts, as well as any person who applies or solicits the application of any architectural coating within Massachusetts. 2. The provisions of 310 CMR 7.25(11) do not apply to any person who supplies, sells, offers for sale, blends for sale, or manufactures any architectural coating that is for exclusive use outside of Massachusetts. (b) Definitions. Terms used in 310 CMR 7.25 are defined at 310 CMR 7.00: Definitions or in 310 CMR 7.25. Where a term is defined in both 310 CMR 7.00: Definitions and in 310 CMR 7.25, the definition in 310 CMR 7.25 shall apply.
    [Show full text]
  • COMPRESSED GAS SAFETY MANUAL August 2017
    COMPRESSED GAS SAFETY MANUAL August 2017 Table of Contents SECTION A: GENERAL ............................................................................................................................... 4 1. Purpose and Scope........................................................................................................................... 4 2. Compressed Gas Safety .................................................................................................................... 4 3. Responsibilities ................................................................................................................................ 5 3.1. PI/Laboratory Supervisor Responsibility ................................................................................ 5 3.2. Students, Staff and Visitors ................................................................................................... 5 3.3. Environmental Health and Safety (EHS) ................................................................................ 5 4. Types of Compressed Gas ................................................................................................................ 6 5. Hazards Associated with Compressed Gases .................................................................................... 6 5.1. Pressure ............................................................................................................................... 6 5.2. Fire and Explosion ...............................................................................................................
    [Show full text]
  • Technical Data Sheet Typhoon Blast™ All-Way Duster
    CHEMTRONICS TDS # 1624 Technical Data Sheet Typhoon Blast™ All-Way Duster PRODUCT DESCRIPTION TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Typhoon Blast™ All-Way Duster can be sprayed right- side up and upside down emitting a high pressure blast Boiling Point - 2 °F / -19 °C that cleans electronics without scratching delicate surfaces. This compressed gas duster offers exceptionally Internal Pressure 47 psia @ 70 °F low global warming impact (GWP = 6) when compared to traditional dusters utilizing HFC-134a (GWP = 1300) or Vapor Density (air=1) 4.0 HFC-152a (GWP = 140)*. This moisture free and oil free @ 77F duster provides the cleanest and most efficient, non- Solubility in Water 0.10% by weight contact method available for particle removal. It is also efficient as a means to quickly remove slow-drying @ 77F F/1 atm solvents. Specific Gravity 1.17 (water = 1 @77F) . High pressure duster sprays any direction, even upside down Evaporation Rate >1 . Ideal for particle removal and contamination control (butyl acetate=1) . Useful for drying and removing solvents from Appearance Clear, Colorless surfaces Liquified Gas . Ultra-low global warming impact of 6 . Nonflammable Odor Slight Ethereal . Nonabrasive and Noncorrosive, Leaves no residue Global Warming Potential 6.0* . Ultra-pure, filtered to <0.2 microns . CFC, HCFC and HFC free Flash Point (TCC) None . VOC free Shelflife 5 years TYPICAL APPLICATIONS RoHS/WEEE Typhoon Blast™ All-Way Duster is engineered for all Status aspects of electronic equipment maintenance and is particularly suited for applications involving: . Audio/Video Equipment *Global warming potential (GWP) is calculated based on a 100 . Computers and Other Electronic Equipment year time horizon.
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET 1. Identification Product identifier Duster™ Aerosol Dust Removal System Other means of identification Product code 14085 Recommended use Pressurized gas duster Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Manufactured or sold by: Company name CRC Industries, Inc. Address 885 Louis Dr. Warminster, PA 18974 US Telephone General Information 215-674-4300 Technical 800-521-3168 Assistance Customer Service 800-272-4620 24-Hour Emergency 800-424-9300 (US) (CHEMTREC) 703-527-3887 (International) Website www.crcindustries.com 2. Hazard(s) identification Physical hazards Gases under pressure Liquefied gas Health hazards Not classified. Environmental hazards Not classified. OSHA defined hazards Not classified. Label elements Signal word Warning Hazard statement Contains gas under pressure; may explode if heated. Precautionary statement Prevention Observe good industrial hygiene practices. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 49°C/120°F. Use with adequate ventilation. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Response Wash hands after handling. Storage Protect from sunlight. Store in a well-ventilated place. Exposure to high temperature may cause can to burst. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise
    [Show full text]
  • Adopted Part 235 Consumer Products and Part 200 General Provisions
    Revised Summary of Express Terms 6 NYCRR Part 235, Consumer Products 6 NYCRR Part 200, General Provisions The Division of Air Resources is revising 6 NYCRR Part 235, “Consumer Products” (Part 235) to reduce volatile organic compound (VOC) emissions, improve air quality, and promote regional product consistency. The revisions will help the state attain federal National Ambient Air Quality Standards, and work toward regionally consistent regulations amongst the Ozone Transport Commission (OTC) states. The revisions include adding nine new product categories and revising ten existing categories in order to reduce the VOC content of the products through lower VOC content limits. Part 200 will be revised to incorporate referenced materials, including American Society for Testing Materials (ASTM) testing procedures, the California Air Resources Board (CARB) provisions supporting this regulation, and to update references to Part 235. Part 235 will be revised to incorporate new definitions and revise some categories in the existing definitions. Additionally, Subpart 235-3 will be updated to add new VOC limits, conform to the revised definitions and product categories, and to remove obsolete text and references. Changes throughout the proposal include a January 1, 2022 compliance date for the new VOC limits on new and reformulated products in the regulation. Likewise, changes were made in the definitions section to provide transitional language, where necessary, for those categories of products that were redefined or revised, to cite which emission standards apply before or after the compliance date of the regulation. Page 1 of 4 The revisions include setting VOC content limits for nine new product categories and lowering the VOC content limits for ten existing product categories.
    [Show full text]
  • A Look at CARB's AB32 GHG Programs, from Early Action to Today AWMA’S 114Th Annual Conference & Exhibition Virtual Conference June 14 – June 17, 2021
    A Look at CARB's AB32 GHG Programs, from Early Action to Today AWMA’s 114th Annual Conference & Exhibition Virtual Conference June 14 – June 17, 2021 Extended Abstract # 984215 Cassandra B. Drotman SCS Engineers, Santa Rosa, California Raymond H. Huff, Camille Q. Le SCS Engineers, Long Beach, California INTRODUCTION California has one of the longest established greenhouse gas (GHG) legislation and regulatory programs in the United States, implemented by the California Air Resources Board (CARB) under the California Global Warming Solutions Act (AB 32, 2006).1 This paper provides an overview of the nine discrete early action measures under AB 32 that were included in the 2008 CARB Scoping Plan, approved in September 2007, and how CARB has evolved those into the current schema that are being implemented today. The nine early action measures include: • December 2007 – Green Ports – Ship Electrification at Ports • June 2008 – Reduction of High GWP Gases in Consumer Products • December 2008 – SmartWay – Heavy-Duty Vehicle Greenhouse Gas Emission Reduction (Aerodynamic Efficiency) • February 2009 – Reduction of Perfluorocarbons from Semiconductor Manufacturing • January 2009 – Improved Landfill Gas Capture • January 2009 – Reduction of HFC-134a from Do-It-Yourself Motor Vehicle Servicing • January 2009 – SF6 Reductions from the Non-Electric Sector • March 2009 – Tire Inflation Program • March 2009 – Low Carbon Fuel Standard The outcomes of the aforementioned proposed early action measures (e.g. the regulations and programs that were adopted) are discussed below. In addition, CARB’s AB32 created two primary pathways for reporting and reducing GHG emissions: • A Mandatory Reporting Program (MRP), which started in 2008, with the CARB Regulation for the Mandatory Reporting of Greenhouse Gas Emissions (Reporting Regulation)2.
    [Show full text]
  • Env-A 4100: Consumer Products VOC Limits.Pdf
    NEW HAMPSHIRE CODE OF ADMINISTRATIVE RULES TABLE OF CONTENTS CHAPTER Env-A 4100 CONSUMER PRODUCTS PART Env-A 4101 PURPOSE, SCOPE, REFERENCES, AND EXEMPTIONS Env-A 4101.01 Purpose Env-A 4101.02 Applicability Env-A 4101.03 References Env-A 4101.04 Exemptions PART Env-A 4102 DEFINITIONS: A THROUGH E Env-A 4102.01 Adhesive Env-A 4102.02 Adhesive Remover Env-A 4102.03 Aerosol Adhesive Env-A 4102.04 Aerosol Cooking Spray Env-A 4102.05 Aerosol Product Env-A 4102.06 Agricultural Use Env-A 4102.07 Air Freshener Env-A 4102.08 All Other Carbon-Containing Compounds Env-A 4102.09 All Other Forms Env-A 4102.10 Antimicrobial Hand or Body Cleaner or Soap Env-A 4102.11 Antiperspirant Env-A 4102.12 Anti-Static Product Env-A 4102.13 Architectural Coating Env-A 4102.14 Aromatic Compound Env-A 4102.15 Artist’s Solvent/Thinner Env-A 4102.16 Astringent/Toner Env-A 4102.17 Automotive Brake Cleaner Env-A 4102.18 Automotive Engine Compartment Adhesive Env-A 4102.19 Automotive Hard Paste Wax Env-A 4102.20 Automotive Headliner Adhesive Env-A 4102.21 Automotive Instant Detailer Env-A 4102.22 Automotive Rubbing or Polishing Compound Env-A 4102.23 Automotive Wax, Polish, Sealant, or Glaze Env-A 4102.24 Automotive Windshield Cleaner Env-A 4102.25 Automotive Windshield Washer Fluid Env-A 4102.26 Bait Station Insecticides Env-A 4102.27 Bathroom and Tile Cleaner Env-A 4102.28 Brake Cleaner Env-A 4102.29 Bug and Tar Remover Env-A 4102.30 Carburetor or Fuel-Injection Air Intake Cleaners Env-A 4102.31 Carpet and Upholstery Cleaner Env-A 4102.32 Charcoal Lighter Material Env-A
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET 1. Product and Company Identification Product identifier Dust-Off Special Application Compressed Gas Duster Synonyms DPN, DPNR, DPNJB, DPNRCN, DPNXL, DPNXL2, DPNXLCN Recommended use Dust removal Recommended restrictions None known. Manufacturer information Falcon Safety Products, Inc. 25 Imclone Drive Branchburg, NJ 08876 US Phone: 1-908-707-4900 Emergency Phone: 1-800-498-7192 Supplier See above. 2. Hazards Identification Physical hazards Gases under pressure Liquefied gas Health hazards Not classified. Environmental hazards Not classified. WHMIS 2015 defined hazards Not classified Label elements Signal word Warning Hazard statement Contains gas under pressure; may explode if heated. Precautionary statement Prevention Observe good industrial hygiene practices. Response Wash hands after handling. Storage Protect from sunlight. Store in a well-ventilated place. Disposal Dispose of waste and residues in accordance with local authority requirements. WHMIS 2015: Health Hazard(s) None known not otherwise classified (HHNOC) WHMIS 2015: Physical None known Hazard(s) not otherwise classified (PHNOC) Hazard(s) not otherwise None known. classified (HNOC) Supplemental information None. 3. Composition/Information on Ingredients Mixture Chemical name Common name and synonyms CAS number % Ethane, 1,1,1,2-tetrafluoro- 811-97-2 100 All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. 4. First Aid Measures Inhalation If symptoms develop, move person to fresh air. If symptoms persist, obtain medical attention. Intentional misuse by deliberately concentrating and inhaling aerosol products may be harmful or fatal. Skin contact In case of contact with liquefied gas, thaw frosted parts with lukewarm water. Remove contaminated clothing.
    [Show full text]