Krishivigyan Kendra, Baramati A/P - Malegaon Khurd, Tal-Baramati, Dist-Pune 413115, Maharashtra, India

Maharashtra Centre of Excellence for Vegetables

( Purchasing & Installation of Pre cooling , cold storage & Power Generators)

Tender no: Part-III (II) Tender No: ADT’S/KVK/CoEV/1666/2016

NOTICE INVITING TENDER

Address: Chairman ADT’s Krishi Vigyan Kendra, Baramati A/p- Malegaon Khurd, Tal - Baramati, Dist- Pune – 413115, Maharashtra, India

Technical specifications 1.28. Place of installation ADT’s, Krishi Vigyan Kendra, Baramati, Malegaon Khurd, Baramati, Pune, Maharashtra, India 1.29. Technical specifications Sr. Component/ Specifications No. No. 1. 1 Pre Component-7: Pre-cooling (9 MT/ 6 hour batch) & Cold Storage Unit (1 unit cooling 5 x 5 x 3 m) – As per NCCD Guidelines (Provide & Construct the Pre cooling Unit & & Cold storage unit as per NCCD Guidelines is must.) 1 Cold

Storage unit

Specifications 1. 1 unit of 75 m3 of Cold storage (5 x 5 x 3 m) 2. Pre-cooling room (5 x 5 x 3 m) 3. Efficient heat transfer and coils and diffuser system for cold storage 4. Refrigerator system for cold storage 5. Thermal insulator and condenser 6. Control mechanism for maintaining climate 7. Flooring as per requirement 8. Humidity controller and advanced cooling system GENERAL SPECIFICATIONS FOR REFRIGERATION SYSTEM

(VIMP- Provide & Construct the Pre cooling & Cold storage unit as per NCCD Guidelines is must )

Brief Specifications for Equipment / Materials / Services i. Refrigeration Compressors & Motors

Quantity 3 No. each of 50% capacity (one preferred as standby) can be provided in case of ammonia. In case of HFC / HCFC, individual condensing units or rack system can be provided. Type For ammonia as refrigerant, reciprocating, multi cylinder complete

with water-cooled head / jackets, with accessories like oil separators, capacity control & unloaded start. Alternatively screw compressor, open type with accessories can be provided. For CFC / HFC, reciprocating. / scroll / screw can be provided. Capacity To be configured in kW at critical operating conditions Estimated To be configured in kW, RPM, type of insulation, Input AC power Motor Supply rating

Evaporative Condenser for Ammonia:-

Coil section Hot dip galvanised M.S. pipes CDW Boiler quality tubes or S.S.304 tubes Fan section With 2/3 Axial Flow Fans with Cast Aluminium OR S.S impellers, complete with TEFC Sq. cage motors, Class F insulation & IP-55 protection Water sump S.S.304 or M.S. Epoxy coated with necessary connections tank Other Water spray arrangement, air inlet grilles, eliminators of provisions suitable design Unit casing with removable G.S sheet panels & inspection windows etc.

Estimated To be configured in kW at 38 deg C condensing & applicable WB Heat temp rejection capacity Suggested ARI Std 490 Standard

6. Component-9: Power Generators 03 Specifications

1) 100 KVA Generator- Specifications 01 *Warranty: 3 years from the date of commission. 1) ENGINE- KVA WATER COOLEED Engine Mode, 6 Cylinder 4strokes, 50 cycles,1500 RPM confirming to BS 5514 and suitable for continuous running along with standard accessories. 2) ALTERNATOR: - 0.8 lagging power factor, 3 phase 4 wire, 415 volts, 1500 RPM, @ 66 KW self excite and self regulated brushless type with deep proof enclosure and rating confirming to IS 4722 specification. 3) ENGINE- KVA WATER COOLE Engine Mode , vertical 6 Cylinder 4strokes, 50 Cycles, 1500 RPM confirming to BS 5514 and suitable for continuous running along with standard accessories. 4) ALTERNATOR: - at 0.8 lagging power factor, @ KW @ BHP , 3 phase 4 wire, 415 volts, 1500 RPM, self excite and self regulated brushless type with deep proof enclosureand rating confirming to IS 4722 specification 5) GENERAL ARRANGEMENT: - The engine will be directly coupled to alternator through a set of specially designed flexible coupling in order to form a compact arrangement and bath the units including the radiator if any will be mounted on a M. S. channel fabricated base-frame. 6) ACCESSORIES: a: Engine protection unit with LLOP, HWT protection. b: AVM Pads – 1 SET

c: Fuel tank – BASE Mounted 200 KVA liters. D :Resi Silencer – 1 No. e: 1 No 12 V, 180 AH Battery with battery leads STANDARD Control Panel: CONTROL PANEL suitable for 415 volts, 3 phase, 4 wires, 50 Hz, 0.8P. F.

fabricated out 14/16

2) 40 KVA Generator- Specifications-

1) ENGINE- KVA WATER COOLEED Engine Model Cylinder 4strokes, 50 01 cycles, @ BHP confirming to BS 5514 and suitable for continuous running along with standard accessories. 2) ALTERNATOR: - any reputed make, at 0.8 lagging power factor, 3 phase 4 wire, 415 volts, @,1500 RPM, self excite and self regulated brushless type with deep proof enclosure and rating confirming to IS 4722 specification. 3) ENGINE- KVA WATER COOLEED Engine Model Cylinder 4strokes, 50 cycles, @ BHP confirming to BS 5514 and suitable for continuous running along with standard accessories. 4) ALTERNATOR: - any reputed make, at 0.8 lagging power factor, 3 phase 4 wire, 415 volts, @,1500 RPM, self excite and self regulated brushless type with deep proof enclosure andrating confirming to IS 4722 specification. 5) ENGINE- KVA WATER COOLEED Engine Model Cylinder 4strokes, 50 cycles,@ BHP confirming to BS 5514 and suitable for continuous running along with standard accessories. 6) ALTERNATOR: - or any reputed make, at 0.8 lagging power factor, 3 phase 4 wire, 415 volts, @,1500 RPM, self excite and self regulated brushless type with deep proof enclosure and rating confirming to IS 4722 specification.

7) ENGINE- KVA WATER COOLEED Engine Model Cylinder 4strokes, 50 cycles,@ BHP confirming to BS 5514 and suitable for continuous running along with standard accessories. 8) ALTERNATOR: - any reputed make, at 0.8 lagging power factor, 3 phase 4

Agricultural Development Trust’s KrishiVigyan Kendra, Baramati A/p - Malegaon Khurd, Tal-Baramati, Dist-Pune 413115, Maharashtra, India. Phone : (02112) 255227, 255327 Fax-255227 Website:http://www.kvkbaramati.com. E-mail: [email protected] wire,415 volts, @,1500 RPM, self excite and self regulatedbrushless type with deep proof enclosure and rating confirming to IS 4722 specification. 7) GENERAL ARRANGEMENT: - The engine will be directly coupled to alternator through a set of specially designed flexible coupling in order to form a compact arrangement and bath the units including the radiator if any will be mounted on a M. S. channel fabricated base-frame. 8) ACCESSORIES: a: Engine protection unit with LLOP, HWT protection. b: AVM Pads – 1 SET c: Fuel tank – Base Mounted 70liters. D: Silencer – 1 No. e: 1 No 12 V, 160 AH Battery with battery leads. Standard Control Panel: STANDARD CONTROL PANEL suitable for 415 volts, 3 phase, 4 wires, 50 Hz, 0.8P. F. fabricated out14/16 gauge MS sheets, free standing floor mounting /wall mounting, front hinged for indoor use cubicle type, undrilled and removable bottom gland plates, for incoming and outgoing connections, dust and vermin proof with TPN Aluminum bus bar chamber complete with internal wiring ferrules, name plates, painting etc. consisting of the following components: Standard AMF panel with: Ammeter & ASS with CTS – 1 set

Voltmeter & VSS- 1 set KWH meter- 1 set Freq. Meter – 1 set Push buttons – 1 set Indicating lamps- 1 set Controls fuse- 1Set Control wiring– 1 set

3) 25 KVA Generator Specifications- 1) ENGINE- WATER COOLEED Engine Model Cylinder 4strokes, 50 cycles, Confirming to BS 5514 and suitable for continuous running along with standard accessories. 2) ALTERNATOR: - make, at 0.8 lagging power factor, 1 phase 4 wire, 415 01 volts,,1500 RPM, self excite and self regulated brushless type with deep proof enclosure and rating confirming to IS 4722 specification. 3) ENGINE- WATER COOLEED Engine Model Cylinder 4strokes, 50 cycles, confirming to BS 5514 and suitable for continuous running along with standard accessories. 4) ALTERNATOR: - any reputed make, at 0.8 lagging power factor, 1 phase 4wire, 415 volts, ,1500 RPM, self excite and self regulated brushless type with

Agricultural Development Trust’s KrishiVigyan Kendra, Baramati A/p - Malegaon Khurd, Tal-Baramati, Dist-Pune 413115, Maharashtra, India. Phone : (02112) 255227, 255327 Fax-255227 Website:http://www.kvkbaramati.com. E-mail: [email protected] deep proof enclosure and rating confirming to IS 4722 specification. 5) GENERAL ARRANGEMENT: - The engine will be directly coupled to alternator through a set of specially designed flexible coupling in order to form a compact arrangement and bath the units including the radiator if any will be mounted on a M. S. channel fabricated base-frame. 6) ACCESSORIES: a: Engine protection unit with LLOP, HWT protection. b: AVM Pads – 1 SET c: Fuel tank – BASE MOUNTED 75 LTRS D :Resi Silencer – 1 No. e: 1 No 12 V, 180 AH Battery with battery lead. STANDARD / Control Panel: STANDARD CONTROL PANEL suitable for 415 volts, 3 phase, 4 wires, 50 Hz, 0.8P. F. fabricated out 14/16 gauge MS sheets, free standing floor mounting /wall mounting, front hinged for indoor use cubicle type, undrilled and removable bottom gland plates, for incoming and outgoing connections, dust and vermin proof with TPN Aluminium bus bar chamber complete with internal wiring ferrules, name plates, painting etc. generally consisting of the following components: Ammeter & ASS with CTS – 1 set Voltmeter & VSS- 1 set KWH meter- 1 set Freq. Meter – 1 set Push buttons – 1 set Indicating lamps- 1 set Controls fuse- 1Set Control wiring– 1 set.

SIGNATURE & STAMP OF TENDERER