FOLD FOLD

Quick-Open Deep Parabolic SPECIFICATIONS One-Year Limited Warranty Shape Deep parabolic This Angler product is warranted to the original purchaser to be free from defects in Interior Silver SOFTBOXES materials and workmanship under normal consumer use for a period of one (1) year Monolights AND Studio Compatibility from the original purchase date or thirty (30) days after replacement, whichever lights occurs later. The warranty provider’s responsibility with respect to this limited INSTRUCTIONS Removable INNER Diffuser Yes warranty shall be limited solely to repair or replacement, at the provider’s discretion, Removable OUTER Diffuser Yes of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be Accepts Grid Yes determined by the warranty provider. If the product has been discontinued, the Yes, Bowens-style Requires Speed Ring warranty provider reserves the right to replace it with a model of equivalent quality provided and function. Diameter QO-DP26: 26 in. (66 cm) This warranty does not cover damage or defect caused by misuse, neglect, accident, QO-DP36: 36 in. (91.4 cm) alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED QO-DP48: 48 in. (122 cm) HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS QO-DP60: 60 in. (152 cm) WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT Weight QO-DP26: 2.5 lb. (1.1 kg) LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR QO-DP36: 2.9 lb. (1.3 kg) FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with QO-DP48: 3.8 lb. (1.7 kg) specific legal rights, and you may also have additional rights that vary from state QO-DP60: 8.4 lb. (3.8 kg) to state. To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Angler along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.anglerlights.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. ANGLER www.gradusgroup.com A Gradus Group Brand Angler is a registered trademark of the Gradus Group.

© 2019 Gradus Group LLC. All Rights Reserved. GG3

FOLD FOLD FOLD FOLD

Setting Up the Softbox Thank you for choosing Angler. Using the Di­users 2 Angler’s Quick-Open Deep Parabolic softboxes open in seconds and fold up just 1. Set the softbox facedown on a flat and as quickly. The Quick-Open series of softboxes feature integrated locking rods stable surface. The inner and outer di£users soften and spread the beam for an even and flattering wraparound light. that lift and lock in place and make setting up fast and e£ortless. The release buttons for each rod let you fold down the softbox so you’ll be ready to move to 2. Open the softbox vents so you can securely Note: Each di£user will reduce the light output by approx. 1 stop. the next setup or location in seconds. grip each rod. Attaching the Inner Di user Quick-Open softboxes are 16-sided light shapers that provide a soft yet focused 3. QO-DP26, QO-DP36, and QO-DP48: 3 The inner di£user is the smaller of the two and has beam for portrait, product, and fashion photography in the studio or on location. Locking opposing rods will keep even snap fasteners around its edge. Attach each of the pressure on the fabric. Use both hands The deep parabolic shape delivers directional control and reduces light spill. snaps to the ones on the softbox interior until the to lift opposing support rods until they di£user is taut. click in place.

Precautions Attaching the Outer Di user QO-DP60: Locking four opposing rods will make it easier to lift and lock the Attach the outer di£user by pressing the touch- • Please read and follow these instructions, and keep this manual in a safe place. remaining rods. Use one hand to grip connect strip against the inner rim of the softbox. • When setting up the QO-DP60, use a heavy-duty light stand and a weight a rod, and your other hand to brace Note: If you plan on using the accessory grid (sold bag on the stand’s legs. the mount. Lift four opposing rods until they click in place. Then lock the seperately), attach the di£user to the inner half of • Not for use with tungsten, halogen, or other high-heat light sources. remaining rods. the touch-connect strip to leave enough room for 4 the grid. • Keep this unit away from water and any flammable gas or liquid. 4. Once all the rods are locked in place, 1 insert the Bowens speed ring into the • Handle this unit with care. Closing the Softbox Bowens mount of your monolight, and 1. Open the vents, and remove the softbox from • Keep this unit away from children. rotate until it locks. the Bowens mount of your monolight. • Use parts provided by the manufacturer only. 5. Rotate the softbox to the preferred 5 orientation. Lock it in place by tightening 2. Place the softbox facedown on a flat surface. 3 • Make sure this item is intact and that no parts are missing before use. the thumbscrew. 3. Lift up on each support rod while pressing the • All photos in this manual are for illustrative purposes only. 6. Close the vents to prevent light leaks. adjacent release button. The support rods will fold down.

FOLD FOLD FOLD FOLD

Setting Up the Softbox Thank you for choosing Angler. Using the Di­users 2 Angler’s Quick-Open Deep Parabolic softboxes open in seconds and fold up just 1. Set the softbox facedown on a flat and as quickly. The Quick-Open series of softboxes feature integrated locking rods stable surface. The inner and outer di£users soften and spread the beam for an even and flattering wraparound light. that lift and lock in place and make setting up fast and e£ortless. The release buttons for each rod let you fold down the softbox so you’ll be ready to move to 2. Open the softbox vents so you can securely Note: Each di£user will reduce the light output by approx. 1 stop. the next setup or location in seconds. grip each rod. Attaching the Inner Di user Quick-Open softboxes are 16-sided light shapers that provide a soft yet focused 3. QO-DP26, QO-DP36, and QO-DP48: 3 The inner di£user is the smaller of the two and has beam for portrait, product, and fashion photography in the studio or on location. Locking opposing rods will keep even snap fasteners around its edge. Attach each of the pressure on the fabric. Use both hands The deep parabolic shape delivers directional control and reduces light spill. snaps to the ones on the softbox interior until the to lift opposing support rods until they di£user is taut. click in place.

Precautions Attaching the Outer Di user QO-DP60: Locking four opposing rods will make it easier to lift and lock the Attach the outer di£user by pressing the touch- • Please read and follow these instructions, and keep this manual in a safe place. remaining rods. Use one hand to grip connect strip against the inner rim of the softbox. • When setting up the QO-DP60, use a heavy-duty light stand and a weight a rod, and your other hand to brace Note: If you plan on using the accessory grid (sold bag on the stand’s legs. the mount. Lift four opposing rods until they click in place. Then lock the seperately), attach the di£user to the inner half of • Not for use with tungsten, halogen, or other high-heat light sources. remaining rods. the touch-connect strip to leave enough room for 4 the grid. • Keep this unit away from water and any flammable gas or liquid. 4. Once all the rods are locked in place, 1 insert the Bowens speed ring into the • Handle this unit with care. Closing the Softbox Bowens mount of your monolight, and 1. Open the vents, and remove the softbox from • Keep this unit away from children. rotate until it locks. the Bowens mount of your monolight. • Use parts provided by the manufacturer only. 5. Rotate the softbox to the preferred 5 orientation. Lock it in place by tightening 2. Place the softbox facedown on a flat surface. 3 • Make sure this item is intact and that no parts are missing before use. the thumbscrew. 3. Lift up on each support rod while pressing the • All photos in this manual are for illustrative purposes only. 6. Close the vents to prevent light leaks. adjacent release button. The support rods will fold down.

FOLD FOLD FOLD FOLD

Setting Up the Softbox Thank you for choosing Angler. Using the Di­users 2 Angler’s Quick-Open Deep Parabolic softboxes open in seconds and fold up just 1. Set the softbox facedown on a flat and as quickly. The Quick-Open series of softboxes feature integrated locking rods stable surface. The inner and outer di£users soften and spread the beam for an even and flattering wraparound light. that lift and lock in place and make setting up fast and e£ortless. The release buttons for each rod let you fold down the softbox so you’ll be ready to move to 2. Open the softbox vents so you can securely Note: Each di£user will reduce the light output by approx. 1 stop. the next setup or location in seconds. grip each rod. Attaching the Inner Di user Quick-Open softboxes are 16-sided light shapers that provide a soft yet focused 3. QO-DP26, QO-DP36, and QO-DP48: 3 The inner di£user is the smaller of the two and has beam for portrait, product, and fashion photography in the studio or on location. Locking opposing rods will keep even snap fasteners around its edge. Attach each of the pressure on the fabric. Use both hands The deep parabolic shape delivers directional control and reduces light spill. snaps to the ones on the softbox interior until the to lift opposing support rods until they di£user is taut. click in place.

Precautions Attaching the Outer Di user QO-DP60: Locking four opposing rods will make it easier to lift and lock the Attach the outer di£user by pressing the touch- • Please read and follow these instructions, and keep this manual in a safe place. remaining rods. Use one hand to grip connect strip against the inner rim of the softbox. • When setting up the QO-DP60, use a heavy-duty light stand and a weight a rod, and your other hand to brace Note: If you plan on using the accessory grid (sold bag on the stand’s legs. the mount. Lift four opposing rods until they click in place. Then lock the seperately), attach the di£user to the inner half of • Not for use with tungsten, halogen, or other high-heat light sources. remaining rods. the touch-connect strip to leave enough room for 4 the grid. • Keep this unit away from water and any flammable gas or liquid. 4. Once all the rods are locked in place, 1 insert the Bowens speed ring into the • Handle this unit with care. Closing the Softbox Bowens mount of your monolight, and 1. Open the vents, and remove the softbox from • Keep this unit away from children. rotate until it locks. the Bowens mount of your monolight. • Use parts provided by the manufacturer only. 5. Rotate the softbox to the preferred 5 orientation. Lock it in place by tightening 2. Place the softbox facedown on a flat surface. 3 • Make sure this item is intact and that no parts are missing before use. the thumbscrew. 3. Lift up on each support rod while pressing the • All photos in this manual are for illustrative purposes only. 6. Close the vents to prevent light leaks. adjacent release button. The support rods will fold down.

FOLD FOLD FOLD FOLD

Quick-Open Deep Parabolic SPECIFICATIONS One-Year Limited Warranty Shape Deep parabolic This Angler product is warranted to the original purchaser to be free from defects in Interior Silver SOFTBOXES materials and workmanship under normal consumer use for a period of one (1) year Monolights AND Studio Compatibility from the original purchase date or thirty (30) days after replacement, whichever lights occurs later. The warranty provider’s responsibility with respect to this limited INSTRUCTIONS Removable INNER Diffuser Yes warranty shall be limited solely to repair or replacement, at the provider’s discretion, Removable OUTER Diffuser Yes of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be Accepts Grid Yes determined by the warranty provider. If the product has been discontinued, the Yes, Bowens-style Requires Speed Ring warranty provider reserves the right to replace it with a model of equivalent quality provided and function. Diameter QO-DP26: 26 in. (66 cm) This warranty does not cover damage or defect caused by misuse, neglect, accident, QO-DP36: 36 in. (91.4 cm) alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED QO-DP48: 48 in. (122 cm) HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS QO-DP60: 60 in. (152 cm) WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT Weight QO-DP26: 2.5 lb. (1.1 kg) LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR QO-DP36: 2.9 lb. (1.3 kg) FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with QO-DP48: 3.8 lb. (1.7 kg) specific legal rights, and you may also have additional rights that vary from state QO-DP60: 8.4 lb. (3.8 kg) to state. To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Angler along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.anglerlights.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. ANGLER www.gradusgroup.com A Gradus Group Brand Angler is a registered trademark of the Gradus Group.

© 2019 Gradus Group LLC. All Rights Reserved. GG3

FOLD FOLD FOLD FOLD

Quick-Open Deep Parabolic SPECIFICATIONS One-Year Limited Warranty Shape Deep parabolic This Angler product is warranted to the original purchaser to be free from defects in Interior Silver SOFTBOXES materials and workmanship under normal consumer use for a period of one (1) year Monolights AND Studio Compatibility from the original purchase date or thirty (30) days after replacement, whichever lights occurs later. The warranty provider’s responsibility with respect to this limited INSTRUCTIONS Removable INNER Diffuser Yes warranty shall be limited solely to repair or replacement, at the provider’s discretion, Removable OUTER Diffuser Yes of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be Accepts Grid Yes determined by the warranty provider. If the product has been discontinued, the Yes, Bowens-style Requires Speed Ring warranty provider reserves the right to replace it with a model of equivalent quality provided and function. Diameter QO-DP26: 26 in. (66 cm) This warranty does not cover damage or defect caused by misuse, neglect, accident, QO-DP36: 36 in. (91.4 cm) alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED QO-DP48: 48 in. (122 cm) HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS QO-DP60: 60 in. (152 cm) WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT Weight QO-DP26: 2.5 lb. (1.1 kg) LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR QO-DP36: 2.9 lb. (1.3 kg) FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with QO-DP48: 3.8 lb. (1.7 kg) specific legal rights, and you may also have additional rights that vary from state QO-DP60: 8.4 lb. (3.8 kg) to state. To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Angler along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.anglerlights.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. ANGLER www.gradusgroup.com A Gradus Group Brand Angler is a registered trademark of the Gradus Group.

© 2019 Gradus Group LLC. All Rights Reserved. GG3

FOLD FOLD