Profile of Dr.SHASHIKANTH CHAKUNTA E-mail : [email protected]

Ph:9908106709

EXPERIENCE:

Quest to join in the technical competent environment of the latest and emerging trends and pursue a career in a challenging position where there is an ample scope for the growth of an individual as well as the Organization.

EDUCATIONAL QUALIFICATIONS:

• Ph.D from NITW in August 2016 • Post Graduate degree in Mechanical engineering with specialization in M/c Design from JNTU Kakinada (Andhra Pradesh) with 66% in 2008 January • Bachelor of engineering (Mechanical) From Gulbarga University (Karnataka) with 66%, Aug 98. • S.S.C from Board of secondary Education, Andhra Pradesh with 74%

PROFESSIONAL EXPERIENCE: (15 YEARS)

• Presently working as Associate. Professor at SREE CHAITANYA COLLEGE OF ENGINEERING, under JNTUH, Hyderabad since 2004 JULY.(Ratified by JNTU as Asst. professor in 2007) • Worked as Assistant professor at ROYAL COLLEGE OF ENGINEERING, MEDAK under JNTUH, Hyderabad from 2001-2004 • Worked as a CAD Engineer on contract basis for DRDL (Defense Research and Development Laboratory) Govt. of since October 98 to 2000 December. Worked in CAD/CAM Facility of SPD DRDL Entrusted with the task of Design and development of varieties of Flight Vehicles

Administrative Experience

• Presently working as HOD Mechanical Engineering Department from 2017 December to till date • Examination In charge from 2015 to 2017 November • HOD, Mechanical Engineering Department from 2009 to 2010 • Academic In charge at SREE CHAITANYA COLLEGE OF ENGINEERING, Karimnagar from 2008 to 2009 • Examination In charge from 2004 to 2008 at SREE CHAITANYA COLLEGE OF ENGINEERING, Karimnagar and HOD H&S during the period of 2004 to 2008 • Examination In charge at ROYAL COLLEGE OF ENGINEERING, MEDAK from 2001 to 2004

List of Workshops:

• Faculty development program on Computational Fluid Dynamics Organized by Department of Mechanical at Sree Chaitanya College of Engineering, Karimnagar on 9th and 10th January 2015 • Participated in a Two-Week ISTE Workshop on Fluid Mechanics conducted by Indian Institute of Technology Kharagpur, From 20th to 30th May, 2014. • Participated in a Five-Day Short Term Course on Essential Techniques for Research Problems in Materials and Manufacturing organized by Mechanical Engineering Department, NITW during 14th to 18th April 2014. • Innovations in materials and processes and transfer of technology to industries sponsored by TEQIP phase II-during 17-19 Oct 2013, NIT Warangal • Participated in the one day National Workshop on New paradigms in manufacturing organized by Dept. Mechanical NIT Warangal, 30th May 2013. • Participated in a Three- day workshop on Precision Manufacturing and Measurements Current Trends and Challenges during 18 to 20th May 2012, organized by Department of Mechanical Engineering, NITW under TEQIP Phase-II • Participated in a Two- day workshop on Advances in materials processing technologies, organized by Department of Mechanical Engineering, S.R College sponsored by Department of Science &Technology, New Delhi, 3rd &4th Feb 2012. • Participated in the workshop on Frontiers of materials &manufacturing processes organized by Dept. Mechanical NIT Warangal, 28th Nov 2011. • Attended a one day workshop on E-Teaching for engineering faculty held at JNTUH, on 2nd July 2011. • Participated in one day National workshop on Applications of design of experiments &Fem Techniques in Mechanical Engineering on 7th Feb 2009 at KITS HZB • Quality improvement program on teaching skills conducted by technical teachers training Institute at Chennai on 1st Feb 2003 to 2nd Feb

Publications in Journals

• CH.Shashikanth and Dr. M. J. Davidson: Simulation studies on the deformation behaviour of AA 2017 alloy in the semi-solid state using FEA", Journal of Materials at High Temperature, 2014, VOL 31(3). (SCI Journal) Impact Factor: 0.8

• CH.Shashikanth and Dr. M. J. Davidson: "Experimental and simulation studies on thixo- forming of AA 2017 alloy", Journal of Materials at High Temperature(SCI Journal), Impact Factor: 0.8

• K. Praveen Kumar and CH.Shashikanth: Design &Analysis of Composite Leaf Spring, International Journal of Technology and Engineering Science [IJTES] TM Volume 2[11], pp: 2569-2571, November 2014.

• Shashikanth Ch,G Venkateshwarlu and Davidson M.J. Optimization of Process Parameters on

the Mechanical Properties of Semi-Solid Extruded AA2017 Alloy Rods. International Journal of Materials Forming and Machining Processes, Volume 6 • Issue 2 July-December 2019.

Inter National conferences

• Dr. M. J. Davidson and CH.Shashikanth: "Determination of material constants and Zener- Hollomon parameter of AA 2017 aluminium alloy under hot compression test", Accepted for presentation in XIII International Conference on manufacturing Engineering to be held in London from March 13-17, 2015. The paper will be published in "International Journal of materials and Mechanical Engineering"

National conferences:

• Attended 1st National Conference on Emerging Trends in Engineering and Technology organized by Vaageswari Engineering College on 4th March 2013 and presented a paper on Influence of EDM process parameters on material removal rate.

• Attended National Conference on Advances in Mechanical Engineering organized by KITS, , February 18th, 2012,and presented a paper on Friction stirs processing Technology-A Review, pp.209-213.

• Attended National Conference on Advances in Mechanical Engineering organized by KITS, Huzurabad, February 18th, 2012,and presented a paper on Influence of material constants and process parameters on deep drawing processes, pp.187-191.

SUBJECTS HANDLED:

1) Fluid Mechanics and Hydraulic machines 2) Solid mechanics 3) Engineering drawing practice 4) Design of m/c elements 5) Engineering Mechanics 6) Finite element analysis 7) Dynamics of M/c

PERSONAL PROFILE:

Name : CHAKUNTA SHASHIKANTH Father’s Name : Late CH .RAMACHANDER RAO Date of Birth : 11th Aug, 1973 Languages known : English, Hindi, Telugu Permanent Address : H.No. 4-6-153 Tilak Road, Karimnagar – 505001. Nationality : Indian Marital status : Married with 3 dependents

Place : Karimnagar Date : (Dr CH SHASHIKANTH)