Instruction Manual
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260 Phone : (770) 282-8686 WASHLET Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.
SW3084T40 SW3084
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop : ■ Thank you for your recent purchase of this product. Date : year month day Please read the enclosed information to ensure the safe use of your product. ■ Be sure to read this Instruction Manual before using your product and keep it in a safe place Tel : ( ) for future reference.
2020.10.1 D07869 What functions are available on your product? Table of Contents
Part No. Safety Precautions ...... 4 Introduction Operational Precautions .....11 Parts Names ...... 12 Keep It Preparation ...... 14 Product name (Model) WASHLET Basic Operations ...... 16 Part No. SW3084T40 ... Functions SW3084 Ref. Page Mechanism of Auto Functions 16 Clean Deodorizer, Rear cleansing Auto wand CLEAN, Pre-mist
Using the Remote Control ... 18 Operation Cleansing Rear soft cleansing ● Sanitary Toilet Temperature Adjustment Front cleansing (Toilet Seat, Warm Water, ...... 20 Wand position Lights to show that the Drying) adjustment "CLEAN" functions are Energy Saver Features ...... 22 operating. Water pressure 18 Various Operations ...... 26 Basic adjustment Setting List ...... 26 Functions Changing the cleansing ● method Oscillating cleansing Auto functions ...... 28 ...... Pulsating cleansing Other settings 30
Personal setting lock Maintenance ...... 31 Power Plug ...... 31 Drying Warm air drying ● Main Unit ...... 32 Maintenance Changing Temperature ● 20, 21 Gap between the Main Unit the temperature adjustment and the Toilet Lid ...... 33 Removing odors Deodorizer ● Gap between the Main Unit and Bowl Unit ...... 34 Sanitary "EWATER+" cleaning Auto wand CLEAN ● 16 ...... Functions Deodorizing Filter 36 Wand ...... 36 Bowl pre-cleaning Pre-mist ● Wand cleaning
...... Heating the toilet seat Heated seat ● - Water Filter Drain Valve 37 Convenience ...... Auto energy saver What to Do? 38 Functions ● Saving energy 22, 23 If the water does not fl ow due to Timer energy saver The self-cleaning functions a water service interruption ...... 38 Main Unit One-touch 34, 35 If you cannot operate with removal operate automatically. Reference (See page 16 for details.) the remote control ...... 38 Maintenance Removable toilet lid● 33 Freeze Damage Prevention .. 39 Wand cleaning 36 As you sit As you stand up Long Periods of Disuse ...... 40
Removing odors inside ... Deodorizer Auto power deodorizer Removal of Operation Guide 41 the bowl unit. Troubleshooting...... 42 A mist is automatically sprayed inside the bowl unit to make it Pre-mist Specifi cations ...... 46 more diffi cult for dirt to adhere. Limited Warranty ...... 47 Cleans the wand with Auto wand CLEAN "EWATER+"
2 3 Safety Precautions IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING WARNING Introduction Symbols and Meanings Do not use other water then allowed by the laws and ordinances of the region of use. Only Use drinking water. Do not use seawater or recycled water. May result in death or serious injury. WARNING Doing so may cause irritation to the skin and malfunction. Do not touch the power plug during thunderstorms. CAUTION May result in injury or property damage. Doing so may cause electrical shock. Do not allow the water supply hose to touch the power plug or outlet. The following symbols are used to indicate important safety instructions for the use of the product. Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
Symbol Meaning Do not do anything that may damage the power cord, power plug. Do not strike, yank, twist, excessively bend, damage, alter, or heat the power cords. This symbol indicates a prohibited use of the product. Also, do not place anything heavy on, bind or pinch the power cords. Using a damaged power cord may result in a fi re, electrical shock, heat or short.
This symbol is used to indicate a required step in the use of this product. Do not use a loose or faulty electrical outlet. Doing so may cause fi re or short circuit.
Do no use any outlet or wiring equipment beyond its specifi ed rating. WARNING Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re due to heat. Do not plug or unplug the power plug with wet hands. Doing so may cause electrical shock. Do not use any power supply other than the one specifi ed. AC 120 V, 60 Hz Do not get any water or cleaning solution on the main unit or power plug. Doing so may cause fi re or excessive heat. Doing so may cause fi re, electrical shock, heat or short circuit. Doing so may cause the product to crack resulting in injury or water damage. Do not stick a fi nger or anything else into the warm air outlet. Never disassemble, repair or alter. Do not place anything on the warm air outlet or drape clothes over it. Doing so may cause fi re, electrical shock, overheating, short circuit or breakdown. Doing so may cause burns, electrical shock or malfunction. Do not install the product on moving vehicles such as wheeled vehicles or boats. Keep cigarettes and other open fl ames away from the product. Doing so may cause fi re, electric shock, short circuit or malfunction. Failure to do so may cause fi re. The toilet seat, toilet lid, main unit, or other parts may come loose and fall off , resulting in injury. Refrain from sitting on the seat for long periods. Do not use the product if a malfunction occurs. It may cause low-temperature burns. In case of breakdown or other problem, be sure to cut off power by means such as unplugging To prevent the following persons from getting a moderate temperature burn during use, other the power plug. person should turn off the toilet seat heater. Close the water shutoff valve to stop water supply. Young children, the aged and other users unable to set the temperature appropriately Possible malfunctions: themselves. Water is leaking from a pipe or the main unit. The ill, physically disabled and others who do not have freedom of movement. The product is cracked or broken. Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have The product makes a strange noise or emits a strange odor. been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep. The product emits smoke. The product is abnormally hot. The toilet seat cushion is out of place. Continued use after malfunction could cause a fi re, electric shock, heat, short circuit, injury or water damage.
4 5 Safety Precautions (Continued)
WARNING CAUTION Introduction
This is an electrical product. Do not install it anywhere water is likely to get on Do not use the product if the main unit is unstable. the product or anywhere with humidity high enough that water is likely to form Doing so may cause the main unit to come loose and fall, resulting in injury. on the surface of this product. When using the product in a bathroom, install a If the product is damaged, do not touch the damaged section. fan or ventilation port and ensure good air fl ow through the bathroom. Doing so may cause electrical shock or injury. Failure to do so may cause fi re or electrical shock. Replace it immediately. Always connect the product to the cold water supply. Connecting to hot water supply may result in burns and equipment damage. Do not apply strong force, mechanical shock, step on or stand on the toilet seat, toilet lid or main unit. Also do not place any heavy object on the toilet Make sure that a properly grounded (3 prong) outlet has been installed. Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or seat, toilet lid or main unit. short circuit. Doing so may cause cracking or cause the main unit to come loose and fall, resulting in injury. Doing so may damage the product and cause injury or water damage. Insert the power plug securely into the outlet. Failure to do so may cause fire, heat or short circuit. Do not lift up this product by the toilet seat or lid. Do not raise the toilet seat or lid while objects are resting on top of the unit. To unplug, hold the power plug, not the power cord. Doing so may cause the main unit to come loose and fall, resulting in injury. Do not unplug by pulling the power cord. Pulling on the power cord may cause damage and result in fi re or heat. When maintaining the plastic parts (main unit etc.) or the water supply hose, If the power cord is damaged, avoid danger by having the manufacturer's use a neutral kitchen detergent diluted with water. Do not use any of the repair department or equivalent specialist replace it. following. Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon Always unplug the power plug from the outlet before maintenance or scrubbing brush. inspection. These items may damage or crack the plastic and cause injury or malfunction. Failure to do so may cause electrical shock or malfunction. These items could damage the water supply hose and cause a water leak. Periodically remove dust and dirt from the power plug and make sure it is securely plugged into the wall outlet. To prevent a sudden water leak, do not remove the water fi lter drain valve Failure to do so may cause fire, heat or short circuit. when the shutoff valve is open. Pull the power plug out from the outlet and wipe clean with a dry cloth. Doing so will cause water to spurt out. (Refer to Page 37 for instructions on cleaning the water fi lter drain valve.) Always unplug the power plug from the outlet before removing the main unit. Failure to do so may cause fi re or electrical shock. Do not fold or crush the water supply hose; do not damage by cutting with a When leaking battery fl uid adheres to your body or clothes, wash it away sharp object. with clean water. Doing so may cause water leaks. The fl uid may damage your eyes or skin. Do not install the base plate, which is not attached. Preliminary studies in females suggest that overuse of continuous spraying Doing so may cause damage. can increase the possibility of vaginal mucosa drying and potential reduction in desirable microbial organisms. Although these studies have not been validated, please consult your healthcare provider for concerns regarding whether these circumstances may apply to you. More importantly, if you are an individual suff ering from any immune defi ciency as a result of disease, chemotherapy, or other medical condition compromising the immune system you should consult your healthcare provider before use of this product.
6 7 Safety Precautions (Continued)
CAUTION DANGER To reduce the risk of electrocution: Introduction
If a water leak should occur, always close the shutoff valve. 1. Do not use while bathing.
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, 2. Do not place or store the product where it can fall or be pulled into a tub or sink. prevent damage to the pipes and hoses due to freezing. 3. Do not place in or drop into water or other liquid. Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak. Regulate the room temperature to prevent the pipes and hoses from freezing during cold months. 4. Do not reach for the product when it has fallen into water. Unplug it immediately. Drain the water.
When not using the product over an extended period of time, drain the water out of the main unit and the water supply hose after closing the water WARNING To reduce the risk of burns, electrocution, fi re or injury to persons: shutoff valve, and pull the power plug from the outlet. When using the product again, allow the product to refi ll with water fi rst. Otherwise, the water in 1. Close supervision is necessary when this product is used by, on, or near children or the tank might become contaminated and cause skin infl ammation or other problems. invalids. (Refer to Page 40 for instructions on replenishing the water.) Leaving the power on may cause fi re or heat. 2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. When installing the water fi lter drain valve, make sure that it is securely tightened in its proper position. 3. Never operate this product if it has a damaged cord or plug, is not working properly, has Failure to securely tighten it may cause a water leak. been dropped or damaged, or has been dropped in water. Return the product to a service center for examination and repair. Push the main unit securely on to the base plate. After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure 4. Keep the cord away from heated surfaces. that the product does not detach. Doing so may cause the main unit to come loose and fall, resulting in injury. 5. Never block the air openings on the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, Make sure of the plus and minus signs on the batteries before inserting them. and other similar items. Remove depleted batteries immediately. When replacing the batteries: 6. Never use while sleepy or drowsy. Replace both batteries with new ones. Use the same brand for both new batteries (any brand available). 7. Never drop or insert any object into any opening or hose. Failure to do so may cause the batteries to leak fl uid, generate heat, rupture, or ignite. 8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or When the product is supposed not to be used for long time, remove the where oxygen is being administered. batteries from the remote control. 9. Connect this product to a properly grounded outlet only. Failure to do so may cause the batteries to leak fl uid. See "Grounding Instructions" in Page 10.
10. The tank should be fi lled with water only.
Servicing should be performed by an authorized service representative. This product is for household use.
8 9 Safety Precautions (Continued) Operational Precautions
■ For prevention of malfunctions ■ For prevention of damage
Grounding Instructions ● Do not block the remote control transmitter or ● Wipe plastic areas such as the main unit and remote Introduction receiver. control with a soft cloth tightly wrung out with water. This product should be grounded. In the event of an electrical short circuit, grounding
DANGER - Improper use of the grounding plug can result in a risk of electric shock. ■ For prevention of malfunctions and failures If repair or replacement of the cord or plug is necessary, do not connect the grounding wire Switch ● Disconnect the power plug if there is a risk of ON to either fl at-head terminal. Gap lightning. ● A toilet seat cover or a toilet The toilet seat lowers. Check with a qualifi ed electrician or serviceman if the grounding wire instructions are not lid cover cannot be used. Covers completely understood, or if in doubt as to whether the product is properly grounded. Seat switch (Built-in) (The seat switch may not function properly. Additionally, the toilet seat ● Sit back on the toilet seat. and lid may not open or SAVE THESE INSTRUCTIONS The seat switch will not turn on unless you close properly.) sit on the seat properly. ● Do not urinate on the main unit, toilet seat or wand. (Doing so may cause a failure or discoloration.) ● Do not apply strong forces to the control panel of the remote control. ● When using a toilet cleaner to clean the toilet, rinse it off within 3 minutes and leave the toilet seat and toilet lid open. Note (If vapor from a toilet cleaner enters the main unit, it may cause a malfunction.) When a child uses the product, the seat switch may not be ACTIVATED by their Wipe off any cleaner that remains on the bowl unit. ● light body weight. Do not use the product with the toilet lid removed. ● Since the toilet seat is designed to move Do not expose to direct sunlight. up and down, a clearance is provided (Doing so may cause changes in color, irregular between the toilet seat cushion and the heated seat temperature, remote control bowl unit. malfunction or the product malfunction due to the change in temperature.) ● Use radios, etc. away from the product. (The product could cause interference with the radio signal.) ● If you use a booster seat for infants or a soft highchair, remove it after use. (Keeping it installed may prevent some of the functions from being used.) ● Do not apply force to the remote control. (May cause malfunction.) To prevent the remote control from being dropped, set it in the hanger when you are not using it. Be careful not to expose it to water. ● Do not place anything on the toilet seat and lid, and do not press them with hands. (Failure to do so may turn on the seat switch, causing the fl oor to get wet if buttons on the remote control are touched and warm water comes out from the wand.) 10 11 Parts Names
Main display Right side of the main unit Introduction
Power LED Seat LED Wand CLEAN LED Toilet lid cushions Energy saver LED Water LED Deodorizer outlet
Toilet lid
Main unit removal button Part no., etc. (Pages 34, 35) Deodorizing fi lter
Wand cover Seat switch Remote control (Built-in) receiver Warm air outlet cover Toilet seat cushions
Water supply hose Wand Power Plug
Left side of the main unit
Shutoff valve*1 Water fi lter drain valve (Page 37) (Page 15)
Power cord
Heated seat For SW3084T40 Cover Water drain plug (Page 40)
Descriptions in this manual are based on the illustrations of SW3084 *1 The shape and location vary depending on the type of toilet bowl and tank. 12 13 Preparation Using the Product for the First Time
If the remote control is secured 1. Insert the battery (for anti theft) 2. Turn on the power 3. Open the shutoff valve Introduction Remove the remote control Remove the screw from the Insert the power plug. Fully open the shutoff valve. from the hanger. 1 1 remote control fi xture. 1 The wand extends and then retracts. 1 (View from side) Check that the "Power" LED Remote control Remote control lights up. Hanger 2
Wall
Hanger Screw
Remove
Mount the remote control in the 3 hanger. ■ About the batteries Use dry cell, alkaline batteries. Be sure to follow "Safety Precautions" to prevent the batteries from rupturing or leaking fl uid. (Pages 6, 8)
14 15 Basic Operation Mechanism of Auto Functions
"EWATER+" is used automatically to clean the wand. The left are default setting functions. As you approach As you sit As you stand up *1 ● These may be changed. → "Various Operations" (Pages 26-30)
Auto wand CLEAN
0 During "Auto wand CLEAN" (sec) 10 25 or "Wand CLEAN"
Deodorizer Flashes
After about 10 seconds
Starts Operation the deodorizer Starts the auto Removing odors inside the bowl unit. power deodorizer ● Deodorizing fi lter needs regular It stops after about 60 seconds. maintenance. (Page 36) What is meant by "EWATER+" ?
Auto wand CLEAN "EWATER+" helps the self-cleaning wand feature working eff ectively and preventing the dirt accumulation causing the stains. Only when the cleansing functions are used. • "EWATER+" is generated from Potable water. After about 25 seconds • "EWATER+" helps to minimize dirty surfaces, but does not make cleaning unnecessary. • The eff ect and duration vary depending on the usage environment and conditions. The wand extends to clean with the "EWATER+" that comes out of the base *2 "EWATER+" can also be used by pressing the remote control button. Pre-mist ■ Wand
Pre-mist Press "Wand CLEAN" button
A mist is automatically sprayed inside the (After wand cleaning, water comes out from around the wand.) bowl unit to make it more difficult for dirt to ● adhere. To clean the wand with it extended. "Wand cleaning" (Page 36)
*1 To keep clean the wand every time it is used, water remaining in the wand is drained after you stand up from the toilet seat. *2 When the cleansing functions (Rear cleansing and Front cleansing etc,) have not been used in 8 hours, the wand is cleaned automatically. (Water comes out from around the wand.)
16 17 Basic Operation Using the Remote Control
Operate the controls on the remote control; a beep sounds when the main unit This section is an overview of the settings that can be confi gured with the remote control. receives the signal. See the corresponding pages for the detailed descriptions.
Stopping ● Functions that operate when a Temperatures Remote control back side Energy saver button is pressed during "Rear *1 Adjust temperatures (Page 20) Saving energy (Page 24, 25) "Stopping" cleansing", "Rear soft cleansing" Stops the operation. or "Front cleansing" cleansing. "Toilet seat "Timer energy temperature" saver" Note Cleansing Sitting back on the toilet seat "Warm water "Auto energy makes it easier to adjust the wand temperature" saver" position and to reduce splashing. "Rear cleansing" Cleanses your rear. "Oscillating cleansing" "Drying air Operation The wand moves back and forth temperature" to cleanse your rear thoroughly. "Setting "Rear soft cleansing" confi rmation" Cleanses your rear with "Pulsating cleansing" mild water pressure. The current setting can be Cleanses with the water pressure discerned from the LEDs. The setting changes between pulsating between soft and strong. and each time the is pressed. The setting changes between "ON" and "Power ON/OFF" "OFF" each time the button is pressed. Pressing it about 3 seconds or longer "Wand cleaning" "Front cleansing" turns the power on/off . Serves as a bidet for ladies. "Water pressure adjustment" • If the remote control is secured to To clean the wand with it extended. prevent theft (Page 15 2-2) (Page 36)
Drying You can adjust the water pressure to one of fi ve levels. Low battery warning "Warm air drying" ([-] Softer, [+] Stronger) mark (Page 38) Dries your rear. After you press the "Water pressure adjustment" button, the set position will light for 10 seconds." "Wand CLEAN"
Cleans the wand with "EWATER+". It will return to the 3rd position for The wand can be automatically a while (not exceeding a maximum cleaned when you use the of 5 minutes) once operation of cleansing functions (Rear cleansing, the remote control has fi nished. Front cleansing, etc.). (Page 16) "Wand position adjustment"
"Personal setting lock" You can adjust the washing position to You can store your preferred "Wand position", "Water 5 diff erent points between the front and pressure" and "Warm water temperature" settings. the rear, using the [▲] and [▼] buttons.
● After you press the "Wand position To store a settings adjustment" button, the set position While cleansing is in progress, set your preferred "Wand position", will light for 10 seconds." "Water pressure" and "Warm water temperature" and then press and hold or for 2 seconds or longer. For your information ● To use It will return to the 3rd position for Press or , and then press the button for the cleansing you want to use. ●Water may sometimes come out from around the wand when it expands in the warm water tank, but this is a while (not exceeding a maximum normal. The "Wand position" and "Water pressure" lamps will light up for about 10 of 5 minutes) once operation of seconds in their set positions, and the "Water temperature" display switches. the remote control has fi nished. ●As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is continuously consumed. *1 Remote control transmitter (Front side, Top side) 18 19 Temperature Adjustment Toilet Seat, Warm Water, Drying
Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be made.
Displaying the temperature level of the pressed button When the seat When the seat temperature and the warm Toilet seat Drying air temperature and the warm water temperature are temperature temperature button water temperature are set turned "OFF" button (When you (When you want to want to adjust adjust the drying air Lit OFF the toilet seat temperature) temperature) Warm water temperature button (When you want Operation to adjust the warm
"OFF" "Low" "Medium" "High" "Low" "Medium" "High" "OFF" OFF Lit Lit Lit Lit Lit Lit OFF (All LED's) • The "Drying" cannot be turned "OFF".
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the setting will be retained. If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 2.
You want to save energy only You want the product to save You want to save energy for the preset duration of time. energy automatically. any way possible Energy saver is on (6 hours, 9 hours) Lit (Green)
Timer energy saver
Auto energy saver Timer energy saver +
Auto energy saver Operation Energy saver is off
The product detects time periods with Once the time is set, the toilet seat When both "Timer energy saver" and "Auto OFF infrequent use and lowers the toilet seat heater and warm water heater will be energy saver" are set, "Auto energy saver" temperature automatically. turned off automatically every day at operates when "Timer energy saver" is not ● It takes about 10 days for the product that same time. operating. to determine the periods when it is
When energy Lit Lit saver is in (Orange) (Green) ● During "Auto energy saver": operation OFF Lit Lit OFF OFF Same LED indication as "Auto energy saver"
■ Main display ● During "Timer energy saver": Same LED indication as "Timer energy saver"
■ Toilet seat heater ● Even if the energy saver is being activated (with the ■ Warm water heater Set*1 OFF Set*1 OFF toilet seat heater set to "Low" or "OFF," or with the Low temperature temperature OFF Low temperature OFF temperature warm water heater set to "OFF"), the toilet seat will be temporarily heated when you sit on it. (To reach the setting temperature, the toilet seat takes about 15 minutes and the warm water about 10 minutes, respectively.) When "Timer energy saver" and "Auto energy saver" (The LED indication on the main display returns to the Example When used infrequently from 9 pm to 6 am When set from 8 am to 5 pm are used together state for when the energy saver is on.) 0 am6 am 9 pm 0 am8 am 5 pm 0 am6 am 9 pm *1 The toilet seat temperature set on pages 20, 21. Set temperature*1 *2 The time period when the toilet seat heater is set to a "Low". The warm water heater is "Set temperature". Low temperature*2 *3 The time period when the toilet seat heater and warm water OFF*3 heater are "OFF". 8 am 5 pm
To set energy saver Page 24 and 25 22 ▶ 23 Energy Saver Features How to Set
Remote control back side Auto energy saver Timer energy saver
● Set the Energy saver at the time you want to start it. Example: To save energy from 1 am to 7 am (for 6 Timer energy Auto energy saver hours) saver button button When 1:00 AM comes,
1 1 Press "Auto energy saver" Press "Timer energy saver" Operation button. button. • Press the "Timer energy saver" button repeatedly until the "6" LED lights up.
The setting changes each time The setting changes each time the button is pressed once the button is pressed once
For setting to "Auto energy saver" For 6 hours Lit (Green) Lit
For setting to "OFF" For 9 hours OFF Lit
When "OFF" OFF
When energy saver is set,
24 25 Various Operations Setting List
How to Set Setting Types Available Settings Settings Bold: Initial settings Ref. Page
Auto wand CLEAN ON / OFF • Set whether or not to clean the wand automatically Page 28 Pre-mist ON / OFF • Set whether or not to spray mist in the bowl unit automatically Auto Cleaning functions Features ON / OFF • Set whether or not to deodorize automatically after sitting on the toilet seat
Deodorizer Operation Page 29 Auto power deodorizer ON / OFF • Set whether or not to power deodorize automatically after standing up
Beep sound ON / OFF • Set whether or not to make a beep sound Other Page 30 settings Personal setting lock ON / OFF • Set whether or not to use the personal setting lock
Check fi rst!
Buttons used for setting LED indication during setting
Remote control back side Remote control back side
Auto energy saver button
Stopping button Toilet seat temperature button When the "Stopping" button is Rear cleansing button pressed for at least 10 seconds Timer energy saver All remote control LEDs flash*1 Wand cleaning button
Setting confi rmation button [Checking settings via LED]
Personal setting lock 2 button "Wand position adjustment" LED
*1 During setting, if the next button is not pressed within about 60 seconds, the light will stop flashing. 26 If you fail to complete the setting, redo from the step 1. 27 Various Operations Auto functions
Cleaning Features Cleaning Features
Set whether or not to clean the wand Set whether or not to spray mist in the bowl Set whether or not to deodorize automatically Set whether or not to power deodorize automatically unit automatically after sitting on the toilet seat automatically after standing up Auto wand CLEAN*1 Pre-mist Deodorizer Auto power deodorizer
Press "Stopping" button until all LEDs Press "Stopping" button until all LEDs on the remote control start fl ashing. on the remote control start fl ashing.
1 (about 10 seconds) 1 (about 10 seconds) Operation
and and 2 2 2 2 Press "Timer energy saver" button Press "Auto energy saver" button Press "Wand cleaning" button Press "Toilet seat temperature" and "Setting confi rmation" button and "Setting confi rmation" button about 5 seconds or longer. button. at the same time. at the same time. The setting changes each time The setting changes each time The setting changes each time The setting changes each time the button is pressed once the button is pressed once the button is held down the button is pressed once longer than 5 seconds. Set whether or not to clean the wand Set whether or not to spray mist in the bowl Set whether or not to power deodorize automatically unit automatically Set whether or not to deodorize automatically automatically after standing up after sitting on the toilet seat For setting to "ON" For setting to "ON" For setting to "ON" For setting to "ON" One short beep. One short beep. One short beep. One short beep.
For setting to "OFF" *1 For setting to For setting to "OFF" "do not spray" For setting to "OFF" One long beep. One long beep. One long beep. One long beep.
3 Press "Stopping" button. 3 Press "Stopping" button.
*1 When "Auto wand clean" is set to "OFF", the "Wand CLEAN" LED turns off .
28 29 Various Operations Other settings Maintenance Power Plug
Other settings Power Plug (Approximately once a month) WARNING Always unplug the power plug from Set whether or not to use the personal setting the outlet before maintenance or Set whether or not to make a beep sound *1 lock inspection. Beep sound Personal setting lock (Failure to do so may cause electric shock or malfunction, resulting in a breakdown.)
Dry cloth Wet cloth For safety, unplug the power Press "Stopping" button until all LEDs Unplug the power plug and plug before maintenance.*1 on the remote control start fl ashing. wipe it with a dry cloth. 1 (about 10 seconds) 1
The "Power" LED goes off . Lit OFF 2 2 Insert the power plug. Press "Rear cleansing" button. Press "Personal setting lock 2" The "Power" LED lights up. button for 5 seconds or longer. 2 The setting changes each time The setting changes each time the button is pressed once the button is held down WARNING Main Unit longer than 5 seconds. ● Periodically remove dust from Set whether or not to make a beep sound
Set whether or not to use the personal the blades and other parts of the Maintenance setting lock power plug. For making a beep sound • Check by "Wand position adjustment" LED (Page 27) • Unplug the power plug and wipe it with a dry cloth. One short beep. For setting to "ON" ● Fully insert the power plug. ● When unplug the power plug, hold the main body of the power plug. • Pulling the power cord may For not making a beep sound damage the power plug or power cord. One long beep.
For setting to "OFF"
Do not use a dry cloth 3 Press "Stopping" button. or toilet paper on plastic parts.
*1 When you change each of the settings, set the electronic sound to "Make a beep sound". *1 Except when using "Wand cleaning".
30 31 Maintenance Main Unit Gap between the Main Unit and the Toilet Lid
Main Unit (Approximately daily) Gap between the Main Unit and the Toilet Lid (Approximately once a month) The toilet lid can be removed for thorough cleaning.
Soft cloth soaked Toilet paper, etc. Soft cloth Toilet paper • in water (May cause damage.) soaked in water • Dry cloth • Nylon scrubbing brush (May cause damage) Unplug the power plug. 1 Removing and Reinstalling Unplug the power plug. 1 Hold with Remove the toilet lid. 2 both hands Slightly tilt the toilet lid to the front. Wipe with a soft cloth that has been soaked in water and wrung out ↓ 2 thoroughly. : Pull the left side outward. ■ ↓ For heavy dirt : Disconnect the hinge from the recess • Wipe with a soft cloth soaked in diluted, neutral kitchen detergent, and then wipe with a soft cloth and pull up. soaked in water. ↓ : Disconnect the right side.
Wipe with a soft cloth that • Paint thinner has been soaked in water Maintenance Benzene 3 • and wrung out thoroughly. Neutral kitchen detergent • Powdered cleanser Insert the power plug. 4 Reinstall the toilet lid. • The "Power" LED lights up. : Join the pin and the hinge on the 3 right side. ↓ Pin Attention! Slightly tilt the toilet lid to the front. ↓ ● This product is an electric appliance. Be careful not to let water seep inside or leave detergent in the gap : While pulling out the left side, between the main unit and bowl unit. (May damage plastic parts or cause a malfunction.) ↓ Recess ● When using a toilet cleaner to clean the toilet, rinse it off within 3 minutes and leave the toilet seat and toilet : Mount by joining the hinge with the lid open. recess. Hinge • Wipe off any cleaner that remains on the bowl unit. * Be careful not to pinch your fi ngers. (If vapor from a toilet cleaner enters the main unit, it may cause a malfunction.) Hinge ● Do not push or pull the covers around the wand with undue force. Insert the power plug. (May cause damage or malfunction.) 5 • The "Power" LED lights up. ● Wipe the back surface of the toilet seat and the toilet seat cushions with a soft cloth tightly wrung out with water. (Otherwise adhesion of dirt may result in discoloration.) Open and close the toilet lid 6 to check the reinstallation.
32 33 Maintenance Gap between the Main Unit and Bowl Unit Gap between the Main Unit and Bowl Unit [SW3084T40] [SW3084]
Gap between the Main Unit and Bowl Unit (Approximately once a month) Gap between the Main Unit and Bowl Unit (Approximately once a month)
You can remove the main unit to clean the top You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit. of the bowl unit and the bottom of the main unit.
Soft cloth soaked Toilet paper, etc. Soft cloth soaked Toilet paper, etc. in water (May cause damage.) in water (May cause damage.)
Unplug the power plug. If the power is not unplugged, Unplug the power plug. If the power is not unplugged, 1 the product may malfunction or 1 the product may malfunction or cause a failure or electric shock. cause a failure or electric shock. Remove the main unit. Remove the main unit. Water supply hose Top of the bowl unit 2 • Do not pull the unit with undue force. Base plate 2 • Do not pull the unit with undue force. (because the water supply hose and power cord are attached.) (because the water supply hose and Power cord (1) Pull the main unit toward you while pressing (2) Lift up the main unit. power cord are attached.) Bolt the "Main unit removal button". • Do not excessively bend the water supply hose. Water supply hose Top of the bowl unit Power cord Base plate Bolt
Main unit Main unit removal button removal button
Pull the main unit toward you while Maintenance Clean the top of the bowl unit and the bottom of the main unit. pressing the "Main unit removal button". 3 • Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth Clean the top of the bowl unit and the bottom of the main unit. soaked in water so that no detergent remains. 3 • Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft Mount the main unit. cloth soaked in water so that no detergent remains. 4 (1) Lift the main unit, then lower it straight down while threading the power cord and water supply hose into the recess on the bowl unit. 4 Mount the main unit. • Be careful not to pinch the power cord. • Do not excessively bend the water supply hose Click CAUTION (2) Align the main unit with the center of the base plate and press it Push the main unit fi rmly on to the fi rmly onto the base plate until a click sound is heard. Base plate Click base plate until a click sound is heard. (Doing so may cause the main unit to come CAUTION loose and fall, resulting in injury.) Push the main unit fi rmly on to the base plate until a click sound is heard. After mounting, check that the main (Doing so may cause the main unit to come loose and fall, unit does not detach even when pulled. resulting in injury.) Align the main unit with the center of the base plate and press it fi rmly onto the base After mounting, check that the main unit does not plate until a click sound is heard. detach even when pulled. Insert the power plug. Insert the power plug. 5 • The "Power" LED lights up. 5 • The "Power" LED lights up. 34 35 Maintenance Deodorizing Filter Wand Water Filter Drain Valve
Deodorizing Filter (Approximately once a month) Water Filter Drain Valve (Approximately once every 6 months)
Mount the deodorizing (2) Press "Stopping" button on the front side of the remote control. 4 fi lter. • The wand retracts.
Insert the power plug. To operate from the front of remote control • The "Power" LED lights up. Push fi rmly until a Wand 5 • Recommended if the remote control is secured to prevent theft. click sound is heard. Water Filter Drain Valve (1) Press "Stopping" button until all LEDs on the remote Water fi lter drain control start fl ashing. (about 10 seconds) valve
Wand (Approximately once a month) (2) Press "Front cleansing" button about 3 seconds or longer. Maintenance
36 37 What to Do? Freeze Damage Prevention
If the water does not fl ow due to a water service interruption When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing. Attention! If you cannot operate with the remote control • When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, do not use the energy saver feature. (May damage the product.) • Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 32 °F (0 °C). If the water does not fl ow due to a water service interruption How to freeze damage prevention
Use a bucket to fl ush water. Large bucket 1 Pour strongly, 1 Close the shutoff valve. (Page 36) 5 Drain the pipe. aiming at the center • The water supply stops. If the water level is low after of the bowl unit. (1) Remove the cover and water fi lter drain valve. 2 fl ushing, add more water. • Loosen the water fi lter drain valve with a CAUTION fl at-head screwdriver and then pull it. • Prevents odors. Do not remove the water fi lter drain valve while the shutoff valve is open. Water fi lter drain Attention! valve (Otherwise, water may leak out) • When the water supply is restored, be sure to perform Newspaper, a fl ush. dust cloth, etc. (To prevent waste from remaining in the drain pipe.) Drain the water from the toilet 2 tank. Cover If you cannot operate with the remote control • Manipulate the lever/button/etc. until the water stops. ■ If the low battery warning mark " " on the back It is the time to replace Flat-head screwdriver of the remote control is fl ashing, please replace the the batteries. Extend the wand. batteries. 3 (Release the pressure from the water supply pipe.) (2) [Applicable to SW3084 only] • Drain the water from the water supply hose. To operate from the back of remote control Water supply hose
(1) Press "Wand cleaning" button. Horizontally
■Replacing the batteries (2) Press "Stopping" button on the front side of the remote control. (3) When water draining is completed, reinstall • Unplug the power plug. The wand retracts. the water fi lter drain valve and cover. 1 • Insert the water fi lter drain valve and use a To operate from the front of remote control fl at-head screwdriver to tighten it securely. Remove the remote control from the • Recommended if the remote control is secured to 2 hanger. prevent theft. (Page 14) (1) Press "Stopping" button until all LEDs Open the battery cover and replace two on the remote control start fl ashing. (about 10 seconds) (Page 14) AA batteries. Reference 3 (2) Press "Front cleansing" button about 3 • The low battery warning mark goes off . seconds or longer.
Mount the remote control in the hanger.
If the toilet is in a location you will not visit for a long time, drain the water. Follow the procedure below. (Failure to do so may cause breakdown or skin irritation due to polluted product tank water.) How to remove the operation guide How to drain the water Unplug the power plug. Drain the water from the toilet tank. Loosen the water drain plug until water 1 1 (Page 39 Step 1 2 ) 5 comes out from around the wand. • Water comes out from around the wand. Remove the remote control from the hanger. (It takes about 3 minutes to complete draining.) (Page 14) Extend the wand. * The water drain plug cannot be removed. 2 2 (Release the pressure from the water supply pipe.) (Page 39 Step 3 ) Water drain plug Remove the hanger and 3 operation guide. Flat-head Phillips screwdriver 3 Unplug the power plug. screwdriver Tighten the water drain plug 4 Drain the pipe. (Page 39 Step 5 ) 6 securely with a fl at-head screwdriver Screw *After draining the water, Keep the cover and reinstall the cover. removed.
Hanger Operation guide
4 Screw the hanger on the wall. ■ If water may get frozen • Add antifreeze solution in the water in the bowl to prevent freezing. (The antifreeze solution should not be fl ushed out. Collect it before using the toilet and dispose of it.) ■ To use the product again • The water needs to be resupplied. (See below)
Resupplying the Water 1 Open the shutoff valve. 5 Mount the remote control in the hanger. • Check that water is not leaking from a pipe or the main unit. 2 If the power is not on, Insert the power plug. Insert the power plug. 6 • The "Power" LED lights up. Reference • The "Power" LED lights up. Paper cup Discharge water from the wand. ■ To install back the operation guide, follow the procedure above. 3 4 (1) Pressing down the left side of the toilet seat, (Install the operation guide at step .) (2) Press "Rear cleansing" button on the remote control to discharge water from the wand for about 2 minutes. • It takes about 1 minute maximum before water comes out. • Catch the water in a paper cup or other receptacle. Soft cloth soaked in water (to prevent scratching) (3) Press the "Stopping" button on the remote control. ■ If the remaining water has frozen and no water comes out • Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth soaked in warm water. 40 41 Troubleshooting
First, try the actions described on pages 42 - 45. If the problem persists, consult the installer, seller, or CAUTION Rear cleansing, Rear soft cleansing, Front cleansing and Wand TOTO customer service. If a water leak occurs, close Ref. (see contact information on the back cover.) Trouble Please check Page the shutoff valve. ● Did you sit on the toilet continuously for 2 hours or longer? (If so, operation is stopped for safety purposes.) - ➞ Stand up from the seat and then use again.
● The seat switch will not turn on unless you sit on the seat properly. 11 ➞ Sit back on the toilet seat. Shutoff valve The wand ● Are you using a toilet seat cover, a toilet lid cover or (or cleansing water) a seat for infants? Covers ➞ does not come out Remove any covers. 11 When using a seat for infants or a soft highchair, remove after each use. Please check fi rst ● Are you pressing "Wand CLEAN" button? • When you press "Wand CLEAN" button, "EWATER+" comes out from the ■ Is the breaker on the distribution board turned on? vicinity of the wand to clean the wand. → Check whether there is a power outage or the breaker has turned ➞ To clean the wand with it extended, perform "Wand cleaning". 36 "OFF". Is the Power LED lit? ● Has a water failure occurred? ■ Is the "Power ON/OFF" setting "OFF"? ➞ Press "Stopping" button on the remote control and wait until water service - → Switch it to "ON" with the remote control. (Page 15 Step2-2) is restored. ■ Is the "Power" LED on the ● Is the shutoff valve closed? The wand extends but 15 main display fl ashing? ➞ Fully open the shutoff valve. the cleansing water → The main unit is not mounted ● Is the water fi lter drain valve clogged with foreign matter? does not come out / 37 properly. Mount them correctly ➞ Clean the filter. again. (Pages 34, 35) The cleansing water
● Is the water drain plug loosened? 40 ■ While the LED is lit, energy saver (Pages 22, 23) is in ➞ Tighten the water drain plug securely. operation, so the toilet seat temperature may be ● Is the warm water temperature set to "OFF" or a low level? 20 Is the Energy saver reduced or the warm water heater and toilet seat ● When the temperature of the water supply or the bathroom is low, the water - LED lit? heater may be turned off . temperature may be low when fi rst sprayed. ● The cleansing water Is the timer energy saver in operation? • The energy saver feature is on when the "Energy saver" LED is on and the is cold "Power" LED is off on the main display. 22, 23 ■ When you sit on the seat, the warm water heater is temporarily turned on Is the " " LED on the back and water is warmed in about 10 minutes. ➞ of the remote controller fl ashing? The remote When the timer energy saver is set to "ON", you can also turn it "OFF". 25 Is the remote control ➝ Replace the batteries. (Pages 14, 41) control uses ● working? batteries "Rear cleansing", "Rear soft cleansing" and "Front cleansing" stop - to operate. automatically after 5 minutes of continuous use. ■ Stops in the middle ● Is the remote control transmitter Does the seat switch have diffi culty detecting? Reference or the remote control receiver of use ➞ Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on 11 blocked? the seat, the seating switch may temporarily stop detecting your presence. ➝ Remove obstructions, dirt, water ● Water comes out Water may sometimes come out from around the wand when it expands in - droplets or any other blockages. the warm water tank. unexpectedly from ● Is the "Wand CLEAN" LED on the main display fl ashing? the wand ➞ Remote control Remote control receiver "Auto Wand CLEAN" starts and the wand is cleaned. 16 transmitter
42 43 Troubleshooting
Warm air drying Deodorizer
Ref. Ref. Trouble Please check Page Trouble Please check Page
The dryer ● Is "Deodorizer" set to "OFF"? ➞ Set to "ON". 29 ● Is the dryer temperature set to low level? 20 ● temperature is low The deodorizer seems Even after sitting down, you do not hear operation sounds. ➞ Sit back on the toilet seat. - ● The feature stops automatically after about 10 minutes of continuous use. - to be not working If you hear an operation sound when you sit on the toilet seat. Stops in the middle ● Does the seat switch have diffi culty detecting? ➞ Clean the deodorizing filter. 36 of use ➞ Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on 11 ● the seat, the seating switch may temporarily stop detecting your presence. A strange odor is Are you using an air freshener or deodorizer that you purchased separately? • Doing so may reduce the effectiveness of the product's deodorizer or cause strange odors. emitted ➞ Remove the air freshener or deodorizer. - Toilet Seat and Toilet Lid The auto power deodorizer ● Is "Auto power deodorizer" set to "OFF"? ➞ Set to "ON". 29 Ref. feature is not working ● It starts about 10 seconds after you stand up from the toilet seat. - Trouble Please check Page
● Is the toilet seat temperature set to "OFF" or a low level? 20 Sanitary
● Ref. Is energy saver in operation? Trouble Please check Page • The energy saver feature is on when the "Energy saver" LED is on and the 22, 23 "Power" LED is off on the main display. ● The Wand CLEAN If the "Wand CLEAN" LED does not light up, it is time to replace the component When you sit on the seat, the toilet seat heater is turned on temporarily and that generates "EWATER+". Consult the installer, seller, or TOTO customer service. - the seat is warmed in about 15 minutes. LED does not light up (see contact information on the back cover.) ➞ The toilet seat is You can turn it "OFF" if the energy saver feature is "ON". 24, 25 cold ● Have you been seated for a long time? Others • After about 20 minutes of sitting, the temperature starts going down, and - after about 1 hour, the toilet seat heater is turned "OFF". Trouble Please check Ref. ➞ Stand up from the seat and then use again. Page ● Did you put anything on the toilet seat or the toilet lid? ● If the nut of the connecting pipe is loosened, retighten it by hand. (Do not use any tool.) ➞ Remove anything placed on top of the toilet seat or lid. - Water is leaking from the ➞ If the water leak does not stop, close the shutoff valve and consult with plumbing connections - ● Is a toilet lid or seat cover installed? TOTO customer service. (see contact information on the back cover.) 11 ➞ Remove any covers. ● There is clearance between the toilet seat cushion and the bowl unit for activating the seat 11 The main unit is switch. When you sit on the toilet seat, the toilet seat subsides slightly to activate the seat switch. ● Are the bolts that anchor the main unit loose? Energy Saver unstable 34, 35 ➞ Remove the main unit and then firmly tighten the base plate bolts. Ref. Trouble Please check Page When sitting on the toilet seat ● When "Pre-mist" is "ON", you hear operation sounds for preparing the pre-mist ● Did you unplug the power plug or was there a power outage? 16 or spraying mist in the bowl unit. The energy saver LED The "Energy saver" LED on the main display may go off when the power is - ➞ You can turn it "OFF". 28 does not light up turned on even if the energy saver feature is "ON". (It will turn on within about 24 hours since the setting is retained.) When moving away from the bowl unit after use ● ● When "Auto power deodorizer" is "ON", operation sounds are made while the The timer energy saver Did you replace the remote control batteries? "Timer energy saver" may be canceled when the batteries are replaced. deodorizing power increases for 60 seconds after you stand up from the toilet seat. Reference feature is not working ➞ Set the timer energy saver again at the time you want to start it. 25 The main unit makes ➞ You can turn it "OFF". 29 a sound ● If "Auto wand CLEAN" is "ON" and you use the cleansing functions (e.g., Rear cleansing and ● Because the function takes several days learning the usage conditions before Front cleansing), you may hear that the wand is extended and cleaned with "EWATER+". The auto energy saver starting energy saver, the amount of energy saving may be low, depending ➞ You can turn it "OFF". 28 feature is not working on the frequency of use. ➞ Check the energy saver setting. 22, 23 When not using the product (e.g., at night) ● If "Auto wand CLEAN" is "ON" and you do not use the cleansing functions (e.g., Rear cleansing and Front cleansing) for about 8 hours, you will hear that the wand is cleaned with "EWATER+" and then the remaining water is drained from inside the product. ➞ You can turn it "OFF". 28
● A mist is sprayed inside the bowl unit to make it more diffi cult for dirt to adhere You feel air in the bowl unit - when sitting on the toilet seat. You may feel air when a mist is sprayed. when sitting on the toilet seat ➞ You can turn it "OFF". 28 44 45 Specifi cations Limited Warranty
SW3084T40 Item SW3084 1. TOTO warrants its products to be free from defects in materials and workmanship during normal use when properly installed and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to the ORIGINAL Rated power supply AC 120 V, 60 Hz PURCHASER of the product and is not transferable to any third party, including but not limited to any subsequent purchaser Rated power consumption 403 W or owner of the product. This warranty applies only to TOTO product is purchased and installed in USA and Canada. Maximum power consumption *1 512 W 2. TOTO's obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO's option, Type of water heater Tank type of the product or parts found to be defective in normal use, provided that such product was properly installed, used and serviced in accordance with instructions. Power cord length 3.93 ft (1.2 m) TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO Water protection level IPX4 will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of Approx. 0.07-0.11 gal / min (Approx. 0.27-0.43 L / min) removal, return and/or reinstallation of the product. Rear cleansing
46 47