DOCSLIB.ORG

Drafting/CAD Give Your Drafting/Design

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Drafting/CAD Give Your Drafting/Design Palm Beach State College Drafting/CAD Give your drafting/design career a new dimension… Continuing Education AutoCAD Introduction Revit Architectural Drafting Introduction CPO 0325 24 hours $235.00 TIO 0380 30 hours $325.00 Join us and learn about the new and enhanced tools that make Learn to use Autodesk Revit, fully parametric architectural 3D design software. By using Autodesk Revit you will learn to design AutoCAD a designer’s dream. Learn to use Autodesk AutoCAD software, the industry standard for computerized the same way the professionals do. When you change one view using drafting. Upon completion of this course, the student should a parametric program the other views are changed automatically to be able to create a basic 2D drawing using drawing and editing reflect your change. For example, if a door is deleted in the door tools, organize drawing objects on layers and add plot. schedule, that door is automatically deleted from the floor plan and Ref# Dates Days Time Campus elevations. This state-of-the-art software, also called Building Call for dates and times Information Modeling, truly takes architectural computer design beyond being a high-tech pencil. This course teaches you to create AutoCAD Intermediate a 3-dimensional model of a residence, and print the floor plan and elevations of the building. Course Prerequisites: Basic computer CPO 0326 15 hours $170.00 skills. AutoCAD skills are helpful. Increase your AutoCAD skills by learning to use efficiency tools Ref# Dates Days Time Campus including grips and advanced object selection; drawing with complex objects including polylines, regions and multiline; Call for dates and times defining blocks and attributes; using external reference files and image files; using layouts and advanced plotting Revit Architectural Drafting Intermediate features. Prerequisite: CPO 0325 or equivalent knowledge. TIO 0381 30 hours $325.00 Ref# Dates Days Time Campus Intermediate Revit teaches how to automate creation of schedules Call for dates and times and sections by taking advantage of the parametric features. You will learn how Revit's building information model prevents errors in architectural drawings. With Revit it is almost impossible to have a Inventor 3D Design Introduction miss-reference detail tag. The course teaches creation and printing TIO 0375 30 hours $325.00 of photo realistic renderings of the model, and how to create and See and revolve your designs before they are built, just like print a whole set of drawings. Prerequisite: TIO 0380 or equivalent major manufacturers do! This course introduces the concepts knowledge. and techniques of 3D design using Autodesk Inventor software. Ref# Dates Days Time Campus Students will learn solid modeling from 2D sketches, assembly Call for dates and times tools and drawing management. Course Prerequisites: Basic computer skills. AutoCAD skills are helpful. Revit Architectural Drafting Advanced Ref# Dates Days Time Campus TIO 0382 30 hours $325.00 Call for dates and times Expand your Revit skills! Learn how to automate creation of schedules and sections by taking advantage of the parametric features. Revit’s building information model prevents errors in Candidates requesting training may be able to receive training architectural drawings and you can learn how in this course. With scholarships through Workforce Alliance if they meet state Revit it is almost impossible to have a miss-referenced detail tag. eligibility and suitability requirements. For more information, visit You may also learn creation and printing of photo realistic www.pbcalliance.com renderings of the model, and how to create and print a whole set of drawings. Prerequisite: TIO 0381. Ref# Dates Days Time Campus Call for dates and times For more information and to be added to our mailing list, contact us at [email protected] Find us on Facebook! or call www.Facebook.com/cceTrades 561-868-3702 Visit: www.palmbeachstate.edu/CCE/Trades for schedules, fees, and additional offerings. .
Load more

Recommended publications
  • Autodesk® Revit® MEP Software Helps Mechanical, Electrical, and Plumbing Engineering Firms Meet the Heightened Demands of Today’S Global Marketplace
    Performance by design. Autodesk ® Revit ® MEP Step up to the challenge. Autodesk® Revit® MEP software helps mechanical, electrical, and plumbing engineering firms meet the heightened demands of today’s global marketplace. BIM for Mechanical, Electrical, and Sustainable Design with Building Autodesk Revit MEP Plumbing Engineers Performance Analysis facilitated collaboration Autodesk® Revit® MEP software is the building Revit MEP produces rich building information among all the teams on a information modeling (BIM) solution for mechanical, models that represent realistic, real-time design electrical, and plumbing (MEP) engineers, providing scenarios, helping users to make more informed single, fully coordinated purpose-built tools for building systems design and design decisions earlier in the process. Project team parametric model, analysis. With Revit MEP, engineers can make better members can better meet goals and sustainability decisions earlier in the design process because they initiatives, perform energy analysis, evaluate enabling us to deliver can accurately visualize building systems before system loads, and produce heating and cooling load integrated solutions that they are built. The software’s built-in analysis reports with native integrated analysis tools. Revit capabilities helps users create more sustainable MEP also enables the exporting of green building bypassed the problems designs and share designs using a wide variety extensible markup language (gbXML) files for use inherent in drawing- of partner applications, resulting in optimal with Autodesk® Ecotect® Analysis software and based technologies. building performance and efficiency. Working Autodesk® Green Building Studio® web-based with a building information model helps keep service as well as third-party applications for — Stanis Smith design data coordinated, minimizes errors, and sustainable design and analysis.
    [Show full text]
  • D2.1-BIM-Models V2.Pdf
    03-2019 BIMy D2.1 v1.01 BIMy Project: D2.1 BIM Model Document metadata Date 2021-03-23 Status Draft Version 2.01 Authors Hashmat Wahid – Willemen Dieter Froyen – Willemen Lise Bibert - Willemen Stijn Goedertier – GIM Steven Smolders - GIM Stijn Van Thienen – GeoIT Elena Pajares – Assar Architects Thomas Goossens – Assar Architects Niki Cauberg – BBRI François Robberts – BBRI Jens Lathouwers – Geo-IT Erick Vasquez - LetsBuild Coordinator Franky Declercq – GeoIT Reviewed by Thomas Goossens – Assar Architects Jens Lathouwers – Geo-IT Version history Version Date Author Change 0.01 2019-04-09 SGO Introduction and scope 0.02 2019-05-03 EPA Overview of model data used 0.03 2019-05-14 SGO/SS Stability of object identifiers through time and scale 0.04 2019-06-04 HWA Modelling conventions to filter by time & IFC use 0.05 2019-06-05 SVT Scope: Parameters within Revit, Methodology: fire parameters 0.06 2019-06-06 HWA 0.07 2019-06-07 SGO Modelling time and scale: notes from the workshop 0.08 2019-06-19 SVT, TGO Modelling fire 0.09 2019-06-20 HWA Modelling time and scale 0.10 2019-09-23 HWA,LBI Document structure, modelling geometry, information, time & scale, export & filtering 0.11 2019-11-27 HWA,LBI How to model Circular Economy data 1.01 2019-12-19 TGO Reviewed – Submitted to ITEA 1 | P a g e 03-2019 BIMy D2.1 v1.01 1.02 2020-09-21 JLA Checking in native software, Path of travel functionality (Revit) 2.0 2021-03-22 All Final review 2.01 2021-03-23 JLA Reviewed – Submitted to ITEA 2 | P a g e 03-2019 BIMy D2.1 v1.01 Table of Contents Table of Contents ....................................................................................................................................
    [Show full text]
  • Using Revit Server with Autodesk Vault Collaboration AEC
    REVIT SERVER AND VAULT COLLABORATION AEC Using Revit Server with Autodesk Vault Collaboration AEC Autodesk ® Revit ® Server and Autodesk ® Vault Collaboration AEC are two separate software products that offer very different capabilities. Revit Server software supports collaboration on Building Information Modeling (BIM) projects across a wide-area network (WAN). Vault Collaboration AEC software helps building professionals manage all of their project data. When deployed together, the functionality of each application enhances the other and provides integrated workflows for your building projects. This paper summarizes the capabilities of the products and describes how the products work together to improve team collaboration and better manage project data. Table of Contents About Revit Server ...................................................................................................... 2 About Vault Collaboration AEC................................................................................... 3 Using Revit Server with Vault Collaboration AEC ..................................................... 4 Typical Configuration ............................................................................................... 4 Combined Workflow Example................................................................................... 6 Summary ..................................................................................................................... 9 1 REVIT SERVER AND VAULT COLLABORATION AEC About Revit Server Revit Server
    [Show full text]
  • Choosing the Right HP Z Workstation Our Commitment to Compatibility
    Data sheet Choosing the right HP Z Workstation Our commitment to compatibility HP Z WorkstationsPhoto help caption. you handle the most complex data, designs, 3D models, analysis, and information; but we don’t stop at the hardware—we know that leading the industry requires the best in application performance, reliability, and stability. Software certification ensures that HP’s workstation hardware solution is compatible with the software products that will run on it. We work closely with our ISVs from the beginning – both in the development of new hardware and in the design of new software or a software revision. This commitment to partnership results in a fully certified HP Workstation ISV solution, and ensures a wholly compatible experience between hardware and software that is stable and designed to perform. In this document, HP Z Workstation experts identify the workstations recommended to run industry specific applications. While many configurations are certified for each application, our reccomendations are based on industry trends, typical industry data set sizes, price point, and other factors. Table of contents Architecture, Engineering, and Construction ..................................................................................................................... 2 Education .................................................................................................................................................................................. 3 Geospatial ................................................................................................................................................................................
    [Show full text]
  • Autodesk Revit Building for ACAD Users
    AUTODESK REVIT ARCHITECTURE FOR AUTOCAD USERS WHITE PAPER Autodesk Revit Architecture for AutoCAD Users Autodesk Revit Architecture building design software works the way architects and designers think, so you can develop higher-quality, more accurate architectural designs. Built for Building Information Modeling (BIM), Autodesk Revit Architecture helps you capture and analyze concepts and maintain your vision through design, documentation, and construction. Make more informed decisions with information-rich models to support sustainable design, construction planning, and fabrication. Automatic updates keep your designs and documentation coordinated and more reliable. Many building industry professionals are familiar with AutoCAD® software and use it today for their work. This white paper will help those who are familiar with that tool understand how Autodesk Revit Architecture works on their terms, introducing some of the main features and concepts in Autodesk Revit Architecture and comparing them to those you may be familiar with in AutoCAD. If you are a current AutoCAD user interested in Autodesk Revit Architecture and building information modeling, the AutoCAD Revit Architecture Suite software may be right for you. It couples the industry- leading AutoCAD, AutoCAD Architecture software with the state-of-the-art Autodesk Revit Architecture software for building information modeling into a single, comprehensive solution. Autodesk Revit Architecture Suite software turns maximum flexibility into competitive advantage. It enables you to make the switch to Building Information Modeling (BIM) at your own pace, while continuing to support existing software, training, and design data investments. True 3D design A major difference between Autodesk Revit Architecture and AutoCAD is that you work with intelligent objects rather than lines and curves.
    [Show full text]
  • Autodesk and Autocad
    Chapter 8 Autodesk and AutoCAD Autodesk as a company, has gone through several distinct phases of life. There were the “Early Years” which covers the time from when Autodesk was founded as a loose programmer-centric collaborative in early 1982 to the company’s initial public offering in 1985, the “Adolescent Years” during which the company grew rapidly but seemed to do so without any clear direction and the “Mature Years.” The beginning of the latter phase began when Carol Bartz became president and CEO in 1992 and continues to the current time. Even under Bartz, there were several well defined periods of growth as well as some fairly stagnant years.1 Mike Riddle gets hooked on computers Mike Riddle was born in California with computers in his veins. In junior high school, he built his first computer out of relays. It didn’t work very well, but it convinced him that computers were going to be an important part of his life. After attending Arizona State University, Riddle went to work for a steel fabricator where he had his first exposure to CAD. The company had a $250,000 Computervision system that, although capable of 3D work, was used strictly for 2D drafting. The company was engaged in doing steel detailing for the Palo Verde nuclear power plant in Arizona. Riddle felt that anything they were doing on this project with the Computervision system could be done on a microcomputer-based system. About the same time Riddle began working at a local Computerland store where they provided him with free computer time to do with as he wanted.
    [Show full text]
  • My Training. My Skills. My Time. Your Design and Engineering Team Is a Valuable Asset to Your Organization and a Considerable Investment
    My Training. My Skills. My Time. Your design and engineering team is a valuable asset to your organization and a considerable investment. But how well are they leveraging the PLM software they use every day? What if you could improve productivity with an easy-to-use online “More than training tool? 70 percent of Get more out of your technology investment with i GET IT® by Tata Technologies, a organizations use self-paced, online training solution that provides real-world skill building for the most TRY IT EXERCISES. online training for popular PLM programs on the market. More than 100,000 designers and engineers i GET IT is founded on the concept of desktop application worldwide rely on i GET IT for access to courses on Autodesk®, Dassault Systèmes, providing practical, project-based learning. training. Do you?”1 PTC®, and Siemens PLM products. i GET IT, part of the i PRODUCTS family which With our Try It exercises, users can “learn by doing” by also includes i CHECK IT, i COMPARE IT and i SUPPORT IT, provides valuable skills participating in a variety of practice exercises. training to support the design process in the areas of GD&T, GPS ISO, FEA, Project LEARNING POINTS. Management and more. Keep track of how many training courses you’ve taken with Learning Points. i GET IT tracks page views, lesson types and tests passed to provide you with a MORE FASTER BETTER Learning Points total. Learning how to effectively use software drives better designs and better INTERACTIVE TEAM REPORTING. products. To meet the relentless demand for new, innovative and more personalized Powerful reporting tools allow managers to review team progress at the push of a products, manufacturers are faced with the challenge of bringing MORE products button.
    [Show full text]
  • Autodesk Navisworks Manage 2012
    Autodesk Navisworks Manage 2012 User Guide April 2011 ©2011 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK,
    [Show full text]
  • Navisworks 2013 Supported Formats and Applications
    Autodesk Navisworks 2013 Solutions Autodesk ® Navisworks ® 2013 Supported File Formats London Blackfriars station, courtesy of Network Rail and Jacobs R Autodesk Navisworks 2013 Solutions Autodesk Navisworks 2013 Solutions This document details support provided by the current release of Autodesk Navisworks 2013 solutions (including Autodesk Navisworks Simulate and Autodesk Navisworks Manage) for: • CAD file formats. • Laser scan formats. • CAD applications. • Scheduling software. NOTE: When referring to Navisworks or Autodesk Navisworks 2013 solutions in this document this does NOT include Autodesk Navisworks Freedom 2013, which only reads NWD or DWF files. Product Release Version: 2013 Document version: 1.0 March 2012 © 2013 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autodesk, AutoCAD, Civil 3D, DWF, DWG, DXF, Inventor, Maya, Navisworks, Revit, and 3ds Max are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. Disclaimer Certain information included in this publication is based on technical information provided by third parties. THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. “AS IS.” AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
    [Show full text]
  • Simulation of Airflow in Building 661
    Simulation of Airflow in Building 661 Geometry Creation Software A variety of AEC CAD applications exist to create drawings for new and existing construction projects. These applications vary in features, functionality and cost, but all support a subset of geometry export formats that may Be the Basis for 3D mesh generation tools targeted at Computational Fluid Dynamics (CFD) application input. A high level summary of some of the tools that were considered during the year 1 GPIC activity are described in the next section. The common file formats which the programs can import or export and listed. In addition, there is another set of formats that may Be useful as a Basis for creating 3D geometric mesh. These formats include AutodesK 3D StudioMAX Binary format, 3DS, AutodesK Maya Binary format, OBJ, AutodesK Softimage XSI, AutodesK Kaydara FBX, WeB-friendly VRML and Collada DAE. CAD Tools Google Sketchup Pro SKetchup is a Basic drawing pacKage offering support for some commonly used geometric data formats typical of other popular drawing applications. The pro version of Sketchup, for which a fee is charged, is required. Sketchup Pro, allows export of 2D vector images in PDF and EPS format, allowing access from vector editing programs liKe AdoBe Illustrator and Freehand. This is particularly useful for embedding in other documents where you require resolution independent images, But not necessarily useful as a Basis for creating 3D geometric meshes for CFD Autodesk AutoCAD AutodesK AutoCAD formats DXF and DWG can Be imported and exported By Google SKetchup Pro. This not only provides data flow Between SKetchup and AutoCAD, But also other popular applications that also support these formats.
    [Show full text]
  • Navisworks® 2016 Supported File Formats
    Navisworks® 2016 Supported File Formats Autodesk Navisworks 2016 Solutions This document details support provided by the current release of Autodesk Navisworks 2016 solutions (including Autodesk Navisworks Simulate and Autodesk Navisworks Manage) for: CAD file formats. Laser scan formats. CAD applications. Scheduling software. NOTE: When referring to Navisworks or Autodesk Navisworks 2016 solutions in this document this does NOT include Autodesk Navisworks Freedom 2016, which only reads NWD or DWF files. Product Release Version: 2016 Document version: 2.3 March 2015 © 2014 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autodesk, AutoCAD, Civil 3D, DWF, DWG, DXF, Inventor, Maya, Navisworks, Revit, and 3ds Max are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. Disclaimer Certain information included in this publication is based on technical information provided by third parties. THIS PUBLICATION AND WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Autodesk
    [Show full text]
  • Keys to an Open AEC Ecosystem “ Digital Transformation Has Gone from a Nice-To-Have to a Must-Have Across Every Phase of Design and Construction.”
    Open data bridges collaboration Keys to an open AEC ecosystem “ Digital transformation has gone from a nice-to-have to a must-have across every phase of design and construction.” – Nicolas Mangon, VP, AEC Strategy, Autodesk In this guide, we share Autodesk’s approach to ensuring openness and interoperability as the AEC industry pursues digital transformation. We highlight our ongoing commitment to improving interoperability and celebrate our connections to the communities doing their part to support more open and collaborative ways of working. INTRODUCTION 3 OPEN DATA STANDARDS 4 COMMON DATA ENVIRONMENTS 6 PARTNERSHIPS, INTEGRATIONS AND APIS 7 BRIEF HISTORY AND RESOURCES 12 KEYS TO AN OPEN AEC ECOSYSTEM 2 INTRODUCTION Driving digital transformation As the Architecture, Engineering and Construction (AEC) industry pursues digital transformation, a growing Computer Assisted Drawing (CAD) and Building Information Modelling (BIM) software ecosystem presents both challenges and opportunities. The increasing flow of digital data connects tools, people and processes through all phases of design and construction. The gains for collaboration and innovation lead to better project outcomes for teams and owners, and new creative and business horizons for designers, technologists and engineers. Nevertheless, a growing body of research suggests inadequate software interoperability can impede project success and become a source of frustration for project teams and a real risk for owners. A 2018 study by FMI and Plangrid1 looked at digitalisation in the construction sector and found that 52% of all rework was caused by poor data and miscommunication, leading to $31.3B in costs for companies working in the U.S. alone. In an average week, “construction employees will spend 14 hours – roughly 35% of their time – looking for project data or information, dealing with mistakes or rework, and handling conflict resolution.”2 Ensuring the availability, access and interoperability of project data, no matter the source, is crucial to reaping the full rewards of digital transformation.
    [Show full text]