2-Port USB 2.0 Sharing Switch GUB212

● Enables two to share the use of a single USB peripheral device (such as ● USB 2.0, 1.1 compliant , scanner, mass storage drive, etc.) ● Supports data transfer of up to 480 Mbps ● Simple port selection via push buttons ● BUS powered - no external power needed ● Supports nearly any USB compatible operating system and most USB devices ● Hot pluggable - can be connected without rebooting computers

Share a USB device with 2 computers

IOGEAR's 2-Port USB 2.0 Peripheral Sharing Switch enables two computers to easily share one USB device such as a printer, scanner, hard drive camera, etc. The GUB212 2-Port USB 2.0 Peripheral Sharing Switch features push-button switching so there's no software to install, and works right out of the box. The GUB212 is not OS dependent so it is compatible with any running at least a USB 1.1 or higher host controller and an operating system with the corresponding USB 1.1 or higher drivers.* In plain English, you can share nearly any USB device between nearly any two computers without doing anything except plugging it in. We add the caveat "nearly any" due to the fact that despite the backward compatibility of USB 3.0 devices, there are some that just cannot work with USB 2.0 due to bandwidth limitations. That said, you can use most USB 3.0 hard drives and with the understanding that they will transfer data at USB 2.0 speeds. This means you can use the GUB212 with a USB 1.1 compatible devices and/or USB 1.1 equipped computers, but keep in mind the connection speeds will be limited to USB 1.1.

What can this do for me?

The GUB212 is great for small offices or home offices since you can share expensive peripherals instead of purchasing duplicates. Connect your USB device to the GUB212, then connect the included USB cables to each computer and a simple button press will switch your high-resolution scanner, 3D printer, , barcode scanner, etc. from one computer to the other. The GUB212 can even share devices between computers running different operating systems. Want to share a keyboard and mouse between your MacBook and Raspberry Pi? No problem, add a USB hub like the IOGEAR http://www.iogear.com/product/GUH285/ and the GUB212 will switch them back and forth easily.

*Most USB devices are compatible, but data transfer rates are limited to USB 2.0 speed. USB 1.1 devices or computers will only operate at USB 1.1 speeds. 2-Port USB 2.0 Peripheral Sharing Switch

Product Requirements Package Contents

Hardware Requirements ● 1 x GUB212 ● 2 x USB Type A to B cable ● 1 x Quick Start Guide ● USB Port ● 1 x Warranty Card

Operating System Requirements

● Supports any computer running a USB 1.1 or higher host controller ● Supports USB 1.1, USB 2.0 or USB 3.0 peripherals*

*Device connection speeds are limited to computer port speed, up to 480Mbps (USB 2.0 speed)

Specifications

Function GUB212 Dimensions GUB212

Computer Interface USB Type B POP Information

Windows Vista®, Windows® 7, Windows® 10'' Peg Hook 5 Operating System Support 8, Windows® 8.1, Mac OS X10.3+ 6'' Peg Hook 3 Switches Unit Dimensions Port Selection Manual Device Selection Height 1.2" (3cm) Port Selection Manual Device Selection Depth 2.7" (6.8cm) Power Supply USB bus power Length 4.3" (11cm) Data Rate Up to 480 Mbps Unit Package Dimensions USB Specification USB 2.0, 1.1 Width 4.5" (11.5cm) Device Connection USB Type A Height 7.8" (19.8cm)

Depth 2" (5.1cm)

Master Carton

Width

Height

Depth

Master Carton Qty.

Weight

Master Carton Wt.

Unit Pack Wt. .58lb (.26kg)

Unit Wt. .25lb (.12kg)

GUB212

© 2015 IOGEAR® IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document.