DOCSLIB.ORG

Powder Injection Moulding International September 2016 Vol

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Powder Injection Moulding International September 2016 Vol 7 1 0 2 E N U J 2 . o N 1 1 . l o V in this issue MIM developments in Asia AP&C: Titanium powder production 3DEO: Prototyping for MIM Published by Inovar Communications Ltd www.pim-international.com Publisher & editorial offices ® Inovar Communications Ltd 11 Park Plaza CataMIM the next Battlefield Enterprise Park Shrewsbury SY1 3AF, United Kingdom Tel: +44 (0)1743 211991 Fax: +44 (0)1743 469909 Email: [email protected] generation of www.pim-international.com Managing Director and Editor Nick Williams Tel: +44 (0)1743 211993 For the metal, ceramic and carbide injection moulding industries MIM/PIM Feedstocks Email: [email protected] Publishing Director Paul Whittaker Tel: +44 (0)1743 211992 Email: [email protected] Assistant Editor Emily-Jo Hopson Tel: +44 (0)1743 211994 CataMIM® AquaMIM® Email: [email protected] New applications drive Consulting Editors Professor Randall M German • A direct replacement for all • Water Debind Associate Dean of Engineering, Professor of capacity expansion current commercially available Mechanical Engineering, San Diego State • Custom scale-up factors University, USA catalytic debind feedstocks Within the pages of this issue of PIM International, readers will available Dr Yoshiyuki Kato Kato Professional Engineer Office, Yokohama, Japan find much to be optimistic about. Investments in production • Improved flow • Large selection of available Professor Dr Frank Petzoldt capacity for MIM components are being made worldwide, whilst Deputy Director, Fraunhofer IFAM, Bremen, Germany • Stronger green and brown materials powder producers expand their operations to keep up with Dr David Whittaker demand from both the MIM and metal Additive Manufacturing DWA Consulting, Wolverhampton, UK parts industries Bernard Williams See us at Consultant, Shrewsbury, UK • More materials available ® Asia is the world’s largest region for MIM component SolvMIM Production production and whilst the industry there has experienced Booth 226 • Better surface finish Hugo Ribeiro, Production Manager Tel: +44 (0)1743 211991 dramatic growth on the back of applications for consumer • Custom scale-up factors • Solvent, Super Critical Fluid Email: [email protected] electronics, many producers are exposed to the fluctuations in Extraction (SFE) or Thermal demand that are an inherent risk when operating in this sector. available Advertising Debind methods Jon Craxford, Advertising Director As Sandvik Osprey’s Paul Davies reveals in his review of MIM in RYER, Inc. • Faster cycle times Tel: +44 (0) 207 1939 749, Fax: +44 (0) 1743 469909 Asia (page 45), there is optimism that MIM smartphone frames 42625 Rio Nedo Unit B • Hundreds of materials E-mail: [email protected] • 65°C / 150°F mold will usher in the next growth phase for the technology. Temecula, CA 92590 available Subscriptions USA temperature Powder Injection Moulding International is Since the establishment of the Asian Powder Metallurgy • Custom scale-up factors published on a quarterly basis as either a free digital Association (APMA) in 2008, the organisation’s biennial Tel: +1 951 296 2203 publication or via a paid print subscription. The Email: [email protected] available annual print subscription charge for four issues is conference series has steadily grown in importance to become £145.00 including shipping. a must-attend event for anyone involved in the Asian PM www.ryerinc.com Accuracy of contents and PIM sectors. This year we present our first technical Whilst every effort has been made to ensure the review from the series, with Prof Jai-Sung Lee reporting on accuracy of the information in this publication, the publisher accepts no responsibility for errors developments which will strengthen the competitiveness and or omissions or for any consequences arising applications of MIM technology (page 75). there from. Inovar Communications Ltd cannot be • At RYER, all our feedstocks are manufactured to the highest level of quality, held responsible for views or claims expressed by Looking ahead to 2018, the PM World Congress will return contributors or advertisers, which are not necessarily with excellent batch-to-batch repeatability. those of the publisher. to Asia, where the flagship industry event series will be held in China for the first time. Given the size and importance of • RYER is the ONLY commercially available feedstock manufacturer to offer Advertisements Although all advertising material is expected to China’s MIM industry and the prestigious event venue located in all five debind methods. conform to ethical standards, inclusion in this the Olympic Park complex, World PM2018 will present a unique publication does not constitute a guarantee or opportunity to both do business and discover contemporary • RYER offers the largest material selections of any commercially available endorsement of the quality or value of such product feedstock manufacturer. or of the claims made by its manufacturer. Beijing. • RYER offers technical support for feedstock selection, injection molding, Reproduction, storage and usage Single photocopies of articles may be made for Nick Williams, debinding and sintering. personal use in accordance with national copyright laws. All rights reserved. Except as outlined above, Managing Director & Editor no part of this publication may be reproduced or transmitted in any form or by any means, electronic, photocopying or otherwise, without prior permission of the publisher and copyright owner. Cover image Printed by Plasma torches during a titanium Cambrian Printers, Aberystwyth, United Kingdom powder atomisation run at AP&C ISSN 1753-1497 (print) (Courtesy AP&C) ISSN 2055-6667 (online) Vol. 11. No. 2 June 2017 This magazine is also available for free download from www.pim-international.com © 2017 Inovar Communications Ltd June 2017 Powder Injection Moulding International 1 2016 September Ryer ad.indd 6 24/04/2017 12:52:04 June 2017 47 52 60 67 73 AP&C explains the attraction of MIM for titanium In this issue components, outlines the company’s plasma atomisation process and presents its growing range 45 Metal Injection Moulding in Asia: of products specifically suited to the MIM process. A story of continuing success for the world’s largest MIM region 73 APMA 2017: MIM strengthens its The MIM industry in Asia is the world’s largest, competitiveness with novel technologies whether considered in terms of number of and new applications parts produced, sales turnover or production Advances in MIM applications, materials and volume. China alone claims to have half of the processing featured prominently at APMA 2017, world’s available MIM capacity, with production the 4th International Conference on PM in Asia, predominantly focused on 3C applications. In this held in Taiwan, April 9-11 2017. In this report report, Dr Paul A Davies, Sandvik Osprey Ltd, Prof Jai-Sung Lee, Hanyang University ERICA, provides an overview of the evolution of the region’s focuses on developments which will strengthen the MIM industry from a powder producer’s perspective. competitiveness of MIM and broaden its applications. 57 Ceramic Injection Moulding: Baselworld 83 Prototyping for Metal Injection Moulding: 2017 sees luxury watch brands launch new 3DEO’s AM solution matches the density offerings and chemistry of MIM parts Baselword 2017 was the 100th anniversary of this, the The nature of MIM technology means that creating most important marketplace for the global watch and functional prototypes that match the density and jewellery industries. Over 106,000 visitors came to chemistry of the final parts can be both expensive see the latest collections, including the most recent and time consuming. 3DEO’s Matt Sand presents a offerings in watches using CIM cases, bezels and new service that promises to deliver prototype and bracelet parts. Bernard Williams reports on some of low to medium volume runs of components that the launches from leading players. match the performance of MIM parts. 65 Titanium MIM moves into the mainstream with plasma atomised powders from AP&C Regular features When it was announced earlier this year that Canada’s AP&C had received an order for 30 tons 5 Industry news of plasma atomised titanium powder for a Metal 91 Event guide Injection Moulding application, it became clear that titanium MIM had reached the mainstream. 92 Advertisers’ index Vol. 11 No. 2 © 2017 Inovar Communications Ltd June 2017 Powder Injection Moulding International 3 | contents page | news | events | advertisers’ index | contact | Industry News The NEW formulation Industry News Catamold® evo To submit news for inclusion in Powder Injection Moulding International please contact Nick Williams, [email protected] High fl owability – High volume – Fast supply Ford uses MIM valve rockers dual-mass flywheel and a vibration-damping clutch disc help neutralise engine oscillations when running on two ® in its new EcoBoost engine cylinders, especially at lower rpm, and enable a wider Catamold evo 17-4PH operating range. Intake and exhaust valves are closed Ford has announced that its multi-award-winning when the system is active, trapping gases to provide a ® 1.0 litre EcoBoost petrol engine will feature valve rockers spring effect that helps balance forces across the three Catamold evo 316L produced by Metal Injection Moulding. MIM valve train cylinders for refinement and also retain temperatures components have become an important application area inside the cylinder that maintain fuel efficiency
Load more

Recommended publications
  • Case Study: Liquidmetal Alloys in SCUBA Equipment
    Case Study Liquidmetal® Alloys in SCUBA Equipment Industry Sporting equipment Challenge Manufacture corrosion resistant, durable, light-weight SCUBA parts - creating a performance and economic advantage CUBA DIVING equipment endures considerably more stress and exposure S to the earth’s elements than most sporting equipment. One of the main components, a diver’s lifeline, is the regulator system. The regulator provides breathable air to the diver from the tank, allowing for a comfortable and safe underwater experience. Stainless steel, brass, aluminum, and bronze have historically been the main metal materials used in regulator parts. These materials are used because of their durability, strength, corrosion resistance, low cost, and manufacturability. Stainless steel is the most common, especially for internal components. In search of better performance, SCUBA equipment manufacturers have introduced a new material – titanium. Titanium regulators offer divers benefits like lower equipment weight, corrosion resistance, durability, and longer time between servicing. All of these attributes are critical in diving equipment due to the extreme demands for performance and consistency from users. While titanium has been advantageous in many ways, there are some drawbacks. It requires expensive and time-consuming machining to achieve final part geometry. Polishing is often necessary to achieve the common chrome surface finish found on titanium regulator parts. Titanium components can often limit or completely restrict cold water diving, often synonymous with deep or technical diving. Technical divers require their equipment to be highly reliable, accurate, and safe due to the extreme conditions they are diving in. Liquidmetal alloys offer similar, if not more, benefits compared to titanium while also overcoming titanium regulator complications.
    [Show full text]
  • Minor Metals—Ready for the Circular Economy in Conversation with Derek Raphael, Derek Raphael & Co
    ISSN 2056-6735 (Online) Minor Metals—Ready for the Circular Economy In Conversation with Derek Raphael, Derek Raphael & Co. The magazine of the Minor Metals Trade Association 5th Edition 2016/May www.mmta.co.uk 1 We focus on quality Established over 21 years with an unrivalled reputation for supplying pure metals and high temperature super alloys into the aerospace, oil, medical and associated industries Accredited ISO 9001, ISO 14001, BS OHSAS 18001 We buy & sell Specialists in the supply of Mo Ta W Hf Nb All Nickel / Cobalt based alloys Full revert management/processing Shot blast Size reduction/plasma Bar cutting Turnings degreased Suppliers of High Temp Raw Materials & Pure Metals Call us on 01909 569930 Email us at [email protected] Website www.advancedalloys.co.uk 2 Counterparty Insolvency INSIDE THIS ISSUE & Conference Review 2016 4-6 Warehouse Fraud Letter from North America 7 Finishing with a ‘bonus’ Q & A on Brexit and Commodities Minor Metals in the Circular 8-9 Economy MMTA & Holman Fenwick Willan Tea with the MMTA—Derek 10-12 Raphael Breakfast Seminar Liquidmetal (and Terminators) 13-14 Swordmaking 16-17 26th May—8:30-10:30am, London In Brief 18-19 We are very pleased to announce that new MMTA Member, Holman Fenwick Willan is holding a breakfast seminar in partnership with the MMTA at its London office. The MMTA promotes essential elements that add This event is free to attend quality, safety and Draft programme: enjoyment to our lives. Registration & Breakfast The MMTA is the world's leading minor metals industry Session 1: Counterparty Insolvency - a case study on: organisation.
    [Show full text]
  • LIQUIDMETAL TECHNOLOGIES, INC. (Exact Name of Registrant As Specified in Its Charter) Delaware 33-0264467 (State Or Other Jurisdiction of Incorporation Or (I.R.S
    Table of Contents UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K ☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 31, 2019 ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from ____________ to ___________ Commission File No. 001-31332 LIQUIDMETAL TECHNOLOGIES, INC. (Exact name of Registrant as specified in its charter) Delaware 33-0264467 (State or other jurisdiction of incorporation or (I.R.S. Employer organization) Identification No.) 20321 Valencia Circle Lake Forest, CA 92630 (Address of principal executive offices, zip code) Registrant’s telephone number, including area code: (949) 635-2100 Securities registered pursuant to Section 12(b) of the Act: None Securities registered pursuant to Section 12(g) of the Act: Title of each class Trading Symbol(s) Name of each exchange on which registered Common stock, $0.001 par value per share LQMT OTCQB Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒ Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
    [Show full text]
  • Liquidmetal Alloy in Automotive Applications
    White paper Liquidmetal alloy in automotive applications A broad range of application opportunities. ey Liquidmetal technology process attributes include precision, Kstrength, surface finish, corrosion resistance, hardness, and high elasticity. These attributes result in a broad range of automotive application categories that could benefit from the technology. Among them include engine timing systems, fuel injection, interior and exterior decorative components, passenger safety components, pumps, sensors, severe duty connectors, and many others. Like any manufacturing process, leveraging the full benefits of Liquidmetal technology is achieved by developing application designs intended for the process. While there are many success stories about parts that have been converted from one process to another, experiencing the best economics and performance is always a result of having the part-design freedom. This design liberty is necessary to address all of the requirements of the manufacturing process used to produce them. White paper Finding the right fit Liquidmetal technology has its own set Pick three of characteristics, some of which overlap other metalworking technologies, making it a valuable manufacturing alternative. Hardness, If you need three or more of the attributes scratch & wear High elastic to the right, Liquidmetal technology is resistance limit a likely solution for your automotive application. Strength Non-magnetic Liquidmetal alloy has many notable Surface finish capabilities, but one in particular stands out; dimensional precision and repeatability. Because the process Corrosion Complex shapes generates all of the final material resistance Dimensional characteristics in the molding process step control/ repeatability with little to no shrinkage (0.4%), part geometries are very stable. Additionally, there is no phase change that occurs in the material from its molten state at the beginning of the injection cycle to the material’s solid state in the mold after cooling.
    [Show full text]
  • Liquidmetal Technologies
    ® 2002 annual report “Since the discovery of thermoplastics over 50 years ago, Liquidmetal௡ alloy is the most significant development in the materials science world.” Michael F.Ashby, Ph.D. Cambridge University 01 The Third Revolution௣ in Materials In the 1800s, Sir Henry Bessemer of England invented a process to ..... 1810 .... 1820..... 1830 .... 1840 ..... 1850 1860 1870 1880 mass-produce steel that opened the gateway to the Industrial Revolution. Mass-produced steel is introduced, Factories, railroads, bridges, high-rise buildings and automobiles were helping launch the Industrial Revolution. all made possible by his vision. During the 1900s, chemists invented 1800s thermoplastics. These materials, which can use a single mold to produce tens of thousands of parts, dramatically reduced the cost of manufacturing and spawned entire new industries that provide an endless array of inex- pensive products accessible to consumers everywhere. Today, Liquidmetal Technologies is leading the next revolution—the development and commer- cialization of a new class of metal alloys whose unique atomic structure provides more than twice the strength of titanium and combines it with processing capabilities similar to plastics. Already, some of the world’s preeminent companies are pioneering the use of Liquidmetalா alloys in existing products and envisioning applications not previously possible to engineer, much less manufacture. Like mass-produced steel and plastics before, Liquidmetalா alloys offer the potential to revolutionize materials development and the vast industries that rely on it. Revolutionary Milestones..... “Liquidmetal௡ alloys can be processed much the same way as one injection molds plastics, so you can make precision, high quality, complex parts from metal in a simple process.” William L.
    [Show full text]
  • Liquidmetal Alloys in Automotive Pressure Sensors
    Liquidmetal alloys in automotive pressure sensors Challenge Meet growing demand while maintaining product innovation, with price sensitivity as a priority. ased on current forecasts the global pressure sensor market Bcould amount to $9.36 billion by 2020, according to a report published by Transparency Market Research. Automotive is the largest revenue generating segment in the pressure sensor market, but many others including aircraft, oil and gas, consumer electronics, heavy machinery, industrial, and medical are experiencing a similar demand. This novel application acts as a transducer, generally measuring gas and liquid pressure. When a gas or liquid expands, the sensor generates a signal as a function of the pressure imposed. There is a wide range of applications and technology surrounding the pressure sensor market including, but not limited to: altitude, flow, depth, pressure, system leak, and radiometric correction of transducer output sensors. This case study will analyze how Liquidmetal technology could be an economic and engineering advantage in the automotive pressure sensor market. Case Study The challenge In addition to technology advancements, changing laws and regulations are major reasons why pressure sensors are a growing product in the automotive market. The sensor collects and relays valuable information about engine performance, energy efficiency, and an object’s environment. For example, in the United States, European Union, and other countries, tire pressure sensors are required by law in registered motor vehicles. These sensors must be capable of detecting when one or more of the vehicle’s tires is 25% or more below the manufacturer’s recommended inflation pressure. Current tire pressure laws in the US have been in place for over eight years, resulting in improved vehicle safety and fuel efficiency.
    [Show full text]
  • OMEGA's Stunning Union of Ceramics and Liquidmetal® a World Premiere!
    OMEGA’s stunning union of ceramics and Liquidmetal® A world premiere! OMEGA has announced the launch of the Seamaster Planet Ocean Liquidmetal® Limited Edition, the world’s first watch to bond ceramics and Liquidmetal®. Swatch Group researchers collabo- rating with OMEGA’s product devel- opment team have created a striking ceramic diving bezel whose numbers and scaling, made of the Liquidmetal® alloy, appear in stunning silvery con- trast to the black ceramic background. The colour of the ceramic dial perfectly matches that of the bezel. The result is an aesthetic wonder only made pos- sible by several new and innovative processes. The remarkable world premiere is being launched in a limited edi- tion of 1948 pieces in honour of the year OMEGA launched its popular Seamaster watch line. Liquidmetal® : seamless bonding, remarkable hardness The Liquidmetal® alloy is an amorphous metal – a metallic material with a disordered, non-crystalline atomic structure. Its fusion temperature is half that of conventional titanium alloys but when it is cooled, its hardness is three times as great as that of stainless steel. Its amorphous structure allows it to bond seamlessly with the ceramic bezel. The Liquidmetal® is a bulk metallic glass alloy consisting of five elements: zirconium, titanium, copper, nickel and beryllium. A bulk metallic glass can, by virtue of its low critical cooling rate, be formed into a structure with a thickness of more than a tenth of a millimetre. Zirconium is an important constituent part both of the Liquidmetal® alloy and of the ceramic material which is made of zirconium dioxide (Zr02). The final, perfectly smooth bezel is particularly resistant to scratching and corrosion because of the hardness of the two components.
    [Show full text]
  • WHAT IS ? Disclaimer: This Guide to Liquidmetal® Is Subject to Change and Update at Any Time Without Notice and Any Errors Are Subject to Correction Without Liability
    WHAT IS ? Disclaimer: This Guide to Liquidmetal® is subject to change and update at any time without notice and any errors are subject to correction without liability. Copyright: Liquidmetal Technologies, Inc. January 31, 2018 A GUIDE TO AMM TABLE OF CONTENTS 5 Chapter 1: INTRODUCTION TO AMORPHOUS METALS 6 Chapter 2: THE TECHNOLOGY & PROCESS TODAY • Company Introduction • The Beginning: From Crystal to BMGS 9 Chapter 3: HOW & WHY TO CHOOSE AMORPHOUS METALS 10 Chapter 4: DIMENSIONAL ACCURACY & REPEATABILITY • Recent Studies 12 Chapter 5: MATERIAL PROPERTIES 15 Chapter 6: CORROSION RESISTANCE & BIOCOMPATIBILITY • Salt Fog • Galvanic • Result Summary 18 Chapter 7: TECHNOLOGY COMPARISON 19 Chapter 8: NEXT STEPS 3 THE COMPANY Liquidmetal Technologies provides advanced molding solutions for complex and high-performance metal parts. The company began on the foundation of amorphous metal technology, and has now expanded process capabilities to metal injection molding (MIM). Matching every customer application with the best process available is a focus at Liquidmetal. Because of this, customers benefit from a solid technical and economic solution. INTRODUCTION 1 INTRODUCTION TO AMORPHOUS METALS THE BEGINNING: FROM CRYSTALS TO BMGS Centuries of technological advancement has led to hundreds of metal alloys, and until recently, each of them shared a common thread of a crystalline microstructure. Every crystalline alloy’s atoms arrange in naturally occurring patterns that represent the most stable form of the material. These materials exhibit broad trends that limit what can be done with them. For example, a metal’s melting temperature is usually proportional to its hardness, and a material’s strength is usually inversely proportional to its ductility.
    [Show full text]
  • A Case for Liquidmetal® Alloys
    WHITE PAPER A Case For Liquidmetal® Alloys A new material and process is making its introduction into the manufacturing realm. Could Liquidmetal alloys be the answer to many of your manufacturing difficulties? See how the material stacks up against similar materials and processes. And explore new ways of approaching small, complex part design. When developing a new design, designers of metal components must always consider the manufacturing methods available to them. At the same time, they must consider the geometric possibilities and material characteristic needs for the particular functional and performance requirements of the application they are designing for. This is not always a simple task. Other manufacturing options If dimensional precision is needed, CNC machining could be the solution. While precision is certainly available with this process, it generally comes with elevated cost - particularly when high levels of part complexity are also needed. Investment casting, die-casting, and metal injection molding (MIM) all provide good levels of part complexity, but each has a limitation that designers need to consider. Investment casting, for example, yields higher levels of dimensional variation (in the range of +/- 0.5% of a given feature size). However, it also produces generally rough surface finishes and is limited in the feature details it can provide on small, complex parts. Often, investment cast parts are machined to achieve fine feature details, tolerances, and surface finish needs. These operations all add incremental costs to the final product. Investment cast parts are also subject to internal voids, which can negatively impact process yields. Die-casting provides excellent part complexity, but Why choose the Liquidmetal? is limited to a small range of metals - all of which have inferior physical properties in comparison to A combination of an unusual metal alloy with most stainless and low alloy steels.
    [Show full text]
  • Teeing Off with an Entirely New Material
    Teeing Off With an Entirely New Material hen plastic was first introduced, people were metal with the elasticity of a polymer. This unique technology fascinated by its possibilities. They watched as a is more than twice as strong as titanium and has a higher W new material evolved and extended its applicable elastic limit. uses into thousands of facets of our daily lives. A new technol- The fundamental technology behind the Liquidmetal alloy ogy, known as the Liquidmetal® alloy, is the result of a is owned by CalTech and is exclusively licensed to project funded by the California Institute of Technology Liquidmetal® Technologies of Lake Forest, California. A (CalTech) in conjunction with NASA’s Jet Propulsion spinoff from its parent company, Liquidmetal® Golf presents Laboratory. Professor Bill Johnson and Dr. Atakan Peker of this space-age development in a complete line golf clubs that OMMERCIAL BENEFITS—SPINOFFS OMMERCIAL C CalTech discovered the material while working on a research are changing the face of the game. project in 1992. Industry professionals believe that this The unique technology is an innovative blend of titanium, invention will change the way the world thinks of vitrified zirconium, nickel, copper, and beryllium that allows for metals—similar to the way plastics have. properties not achievable with other materials. It is more than The Liquidmetal alloy is part of an entirely new class of twice as strong as titanium, highly resistant to deformation, vitrified metals, and is also known as metallic glass, or and has no weak spots, providing for almost total energy Vitreloy.® A vitrified metal is a frozen liquid that fails to transfer.
    [Show full text]
  • Check out Reviews of Sandisk's USB Flash Drives on Pages 4-16
    ISSN 1061-5725 This Month’s Presentation Tom Wharton columnist for the Salt Lake Tribune will talk about Gear, Gadgets, and Gimmicks Vol ume 23, No. 12 December 2005 www.ucs.org This Month’s Meeting: Wednesday 14th at 7 pm James Alexander Check “How To” presentation: “From slides/pictures to DVD Out movie, preserving and sharing Images” Reviews Watch the Powerpoint Presentation of SanDisk’s USB Flash Drives These Blue Chip guys sure on want a lot of computer stuff Pages 4-16 for Christmas! Utah’s Award Winning Computer Magazine! y liff illward, ditor [email protected] Thanks Has FireWire Fizzled? I wish to thank all of you that sent me e-mail about Is Apple about to drop FireWire, the standard it my illness last month. It was nice to know that people are created and for so long fostered. concerned about my health. It seems as though I am still Certainly, that’s what Apple notebook-oriented having some problems after the flu shot, but not serious. website O’Grady’s PowerPage suggests. Apple has al- I just don’t feel quite up to par. ready dropped FireWire from the latest iPods, much to Enough about me, lets get on the news! the annoyance of numerous users. It’s clearly shifting its allegiance to USB 2.0, which while What’s for Christmas? technologically inferior to FireWire is Guess What? LCD prices are com- fast enough for almost all PC-peripheral ing down! Promotional pricing on LCD connections. monitors caused unit sales to increase by Recent 36 percent during Thanksgiving week.
    [Show full text]
  • ENGEL Liquidmetal® Efficient Injection Moulding of Metal Alloys
    ENGEL Liquidmetal® Efficient injection moulding of metal alloys be the first. ® Complex Unique component properties with Liquidmetal Ready for the revolution Repeatability in metal processing? shapes Excellent Strength Non-magnetic elasticity In cooperation with Liquidmetal Techologies, ENGEL is opening up If three of these requirements apply the door to totally new material classes and product properties: the your application is suitable for Liquidmetal®: Hardness, use of novel amorphous zirconium alloys, with the injection moulding Corrosion resistance against Surface resistance scratching appearance process, now makes it possible to manufacture extremely high-quality and wear metal components. Elastic, virtually indestructible & extremely corrosion-resistant Liquidmetal® impresses thanks to: The non-crystal structure of the Liquidmetal® alloys provides extremely absolute process repeatability hard, but also highly-elastic parts with excellent elastic recovery. and manufacturing precision Whether for air transport and space travel, military or medicinal uses, even for mass production or the sports equipment sector: the alloys‘ low specific weight, corros- excellent resistance to ion resistance and anti-magnetic quality make it possible for products corrosion and external influences to be developed with a completely new quality profile. Plus, the parts brilliant surfaces without rework can be injection moulded with high economic efficiency and an out- excellent elasticity standing surface quality. light weight and constant part weight
    [Show full text]