Ofrecido por www.electromanuales.com
LCD TV PLASMA TV OWNER’S MANUAL
LCD TV MODELS PLASMA TV MODELS 37LF6* 37LY9* 50PF9* 42LF6* 42LY9* 60PF9* 47LF6* 47LY9* 52LF6* 52LY9* 37LF7* 42LF7* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) ID Number(s): 4560: 37LY95 4536: 47LF65 4534: 42LY95 4604: 37LY96 4558: 47LY95 4606: 47LY96 4537: 42LF65 4608: 37LF66 4605: 42LY96 4610: 47LF66 4607: 52LY96 4612: 52LF66 4609: 42LF66 4614: 50PF96 4611: 52LF65 4724: 37LF75 4725: 42LF75 4911: 42LY99 4615: 60PF96 4965: 50PF95(50PF95-ZJ) 4551: 60PF95 4613: 50PF95 (50PF95-ZA) 4535: 37LF65
Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.
Owner's ACCESSORIES Manual
Owner’s manual
Owner’s Manual Power Cord Batteries
D/A
IN P P O U W D T E / TV R A TV GU /R ID AD P E D IN IN IO O V P W PU U D T T E IN R F M O O S i BRIGHT I/II LE SIM D E V P T E P C LIN V B R K RATIO A C SU T M K B E D E T X V N PICTURE TV/RADIO IT D U LE T Slightly wipe stained spot on the exterior RATIO V TE C X R T S O U N I/II D E X IT only with the cleansing cloths for the prod- O K BA EX C IT K M EN U uct exterior if there is stain or fingerprint VOL INFO i
GUIDE MUTE OK Q.V IE 3 2 1 W on surface of the exterior. P 456 R V O 78 L F LIST AV
S IZ 123P E 0 M R U or T T UPDATE 9 E IM 456 E Do not wipe roughly when removing stain. F R A E V V E INDEX A 789 ? L i H O LIS LD T Please be cautious of that excessive power
U 0 PD Polishing Cloth A TE SL Q.VIEW E INDEX EP may cause scratch or discoloration. SU BTIT LE HO L T D IM Polish the screen with the cloth. E ? RE VE AL
Remote Control
Plasma TV models
50PF9* only 60PF9* only This feature is not available for all models. This feature is not available for all models.
One desk-type stand fixture 2- TV Brackets Two rubber caps protection cover 3-bolts Refer to p. 15 2-Wall brackets 2-eye-bolts 2- Wall Brackets 2-bolts Refer to p. 15 Refer to p. 15
LCD TV models
This feature is not available for all models.
37” only 37LF7* only
2- TV Brackets 2- Wall Brackets Twister Holder or Arrange the wires with the twister 4-bolts for stand assembly 1-screw for stand fixing holder. Refer to p. 10 Refer to p. 10
2-bolts Cable Management
1 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
CONTENTS
ACCESSORIES ...... 1 Fine Tuning (In Analogue Mode) ...... 51 Assigning a Station Name (In Analogue Mode) . . . . . 51 Programme Edit (In Analogue Mode) ...... 52 Calling the Programme Table ...... 54
CONTENTS PREPARATION Input Source Selection ...... 55 SIMPLINK ...... 56 Front Panel Controls...... 4 Back Panel Information ...... 7 Stand installation...... 10 PICTURE CONTROL ATTACHING THE TV TO A DESK...... 10 Attaching the TV to a wall ...... 11 Back Cover for Wire Arrangement ...... 12 EPG (Electronic programme guide) (In Digital Mode) Desktop Pedestal Installation ...... 15 - Switch on/off EPG ...... 58 Wall Mount: Horizontal installation ...... 15 - Select a programme ...... 58 Antenna Connection...... 16 - Button function in NOW/NEXT guide mode . . . . 59 - Button function in 8 days guide mode ...... 59 - Button function in date change mode ...... 59 EXTERNAL EQUIPMENT SETUP - Button function in extended description box . . . . 60 - Button function in record/remind setting mode . . 60 HD Receiver Setup ...... 17 - Button function in timer list mode ...... 60 DVD Setup ...... 20 Picture Size (Aspect Ratio) Control ...... 61 Insertion of CI module ...... 22 Preset Picture Settings VCR Setup ...... 23 - Picture Mode-Preset ...... 63 Digital Audio Out Setup ...... 25 - Auto Colour Tone Control (Warm/Medium/Cool) . . . 64 Other A/V Source Setup ...... 26 Manual Picture Adjustment PC Setup ...... 27 - Picture Mode-User option ...... 65 - Screen Setup for PC Mode ...... 30 - Colour Tone - User option ...... 66 XD - Picture Improvement Technology ...... 67 WATCHING TV / PROGRAMME CONTROL XD Demo ...... 68 TruMotion Demo ...... 68 Remote Control Key Functions ...... 34 Advanced - Cinema ...... 69 Turning on the TV ...... 38 Advanced - TruMotion ...... 69 Programme Selection ...... 39 Advanced - Black(Darkness) Level ...... 70 Volume Adjustment ...... 39 Picture Reset ...... 71 On Screen Menus Selection and Adjustment . . . . 40 Image Sticking Minimization(ISM) Method ...... 72 Auto Programme Tuning (In Digital Mode) . . . . . 41 Low-Power Picture Mode ...... 73 Manual Programme Tuning (In Digital Mode) . . . 42 Programme Edit (In Digital Mode) ...... 43 5V antenna Power (In Digital Mode only) ...... 45 Software Update (In Digital Mode only) ...... 46 Diagnostics (In Digital Mode only) ...... 47 CI Information (In Digital Mode only) ...... 48 Auto Programme Tuning (In Analogue Mode) . . . . 49 Manual Programme Tuning (In Analogue Mode) . . . . 50
2 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND & LANGUAGE CONTROL DIGITAL TELETEXT
Auto Volume Leveler ...... 74 Teletext within Digital Service ...... 92 Preset Sound Settings - Sound Mode ...... 75
Teletext in Digital Service ...... 92 CONTENTS Sound Setting Adjustment - User Mode ...... 76 Balance ...... 77 TV Speakers On/ Off Setup ...... 78 APPENDIX Selecting digital audio out ...... 79 I/II Troubleshooting ...... 93 - Stereo/Dual Reception (In Analogue Mode Only) . . . .80 Maintenance ...... 95 - NICAM Reception (In Analogue Mode Only) ...... 81 Product Specifications ...... 96 - Speaker Sound Output Selection ...... 81 Programming the Remote Control ...... 98 On-Screen Menu Language/Country Selection . . . . . 82 IR Codes ...... 102 Language selection (In Digital Mode only) ...... 83 External Control Device Setup ...... 104
TIME SETTING
Clock Setup ...... 84 Auto On/ Off Timer Setting ...... 85 Auto Shut-off Setting ...... 86 Time Zone Setup ...... 87 Sleep Timer Setting ...... 87
PARENTAL CONTROL / RATINGS
Set Password & Lock System ...... 88 Parental Control ...... 89
TELETEXT
Switch on/off ...... 90 SIMPLE Text ...... 90 TOP Text ...... 90 FASTEXT ...... 91 Special Teletext Functions ...... 91
3 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION
FRONT PANEL CONTROLS A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. A If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models: 50PF9*, 60PF9* PREPARATION
Remote Control Sensor
INPUT MENU OK VOL PR
INPUT MENU OK VOL PR
OK Button Power/Standby Indicator • illuminates red in standby mode. MENU Button PROGRAMME Buttons INPUT Button POWER Button VOLUME Buttons
SWIVEL STAND ! NOTE (Only PLASMA TV MODELS) G Before adjusting the angle, you must After installing the TV, you can adjust the TV set remove the cable management and manually to the left or right direction by 20 degrees loosen (to the left) the shaft bolt on the to suit your viewing position. middle of stand’s back. And when stand be level with TV, you must close (to the right) the shaft bolt to set the hole.
4 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
LCD TV Models: 37LF6*, 42LF6*, 47LF6*, 52LF6* PREPARATION
PR PROGRAMME Buttons
VOL VOLUME Buttons
OK Button OK
MENU MENU Button
INPUT INPUT Button
/I POWER Button
Intelligent Eye Power/Standby Indicator Adjusts picture according to • illuminates red in standby mode. the surrounding conditions. Remote Control Sensor • illuminates green when the set is switched on.
5 Downloaded From TV-Manual.com Manuals CH VOL CH VOL OK Button MENU Button INPUT Button Button POWER PROGRAMME Buttons PROGRAMME Buttons VOLUME POWER Button POWER INPUT Button OK Button MENU Button PROGRAM Buttons PROGRAM VOLUME VOLUME Buttons PR OK VOL MENU INPUT PR VOL OK MENU INPUT /I * Power/Standby Indicator Power/Standby mode. in red • standby illuminates green when • the illuminates set is switched on. , 52LY9 * Power/Standby Indicator Power/Standby • red in mode. illuminates standby • green when illuminates the set is switched on. , 47LY9 * * , 42LY9 * 42LF7 Remote Control Control Remote Sensor Remote Control Sensor Control Remote Ofrecido por www.electromanuales.com por Ofrecido ee yy tions. EE ee
tt yy nn EE
ee tt gg ii nn ll ll ee ee gg ii tt ll ll nn II Adjusts Adjusts picture to the according sur- conditions. rounding ee tt
nn II Adjusts Adjusts picture the to according surrounding condi
LCD TV LCD Models: 37/ LCD TV LCD Models: 37LY9 PREPARATION
6 PREPARATION Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
BACK PANEL INFORMATION A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models
AV IN 3
S-VIDEO AV IN 3
S-Video Input PREPARATION R
Connect S-Video out S-VIDEO from an
S-VIDEO device. R AUDIO
Audio/Video Input AUDIO MONO L/
Connect audio/videoL/MONO output from an external device to VIDEO these jacks. VIDEO
9 1 2 3
PCMCIA CARD SLOT EJECT HDMI/DVI IN HDMI IN RGB IN RGB AUDIO AV 1 AV 2 12 (PC) (RGB/DVI)
DIGITAL AUDIO VIDEO AUDIO ANTENNA OUT IN
COMPONENT IN OPTICAL
RS-232C IN (CONTROL & SERVICE)
4 5 6 7 8 1 PCMCIA (Personal Computer Memory Card 6 RS-232C IN (CONTROL & SERVICE) PORT International Association) Card Slot Connect to the RS-232C port on a PC. (This feature is not available in all countries.) 7 Component Input 2 HDMI Input Connect a component video/audio device to Connect a HDMI signal to HDMI IN. these jacks. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. 8 Euro Scart Socket (AV1/AV2) 3 RGB/DVI Audio Input Connect scart socket input or output from an Connect the monitor output from a PC to the external device to these jacks. appropriate input port. 9 Power Cord Socket 4 Antenna Input This TV operates on an AC power. The voltage is Connect over-the-air signals to this jack. indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equip- ment. Note: In standby mode, these ports do not work. 7 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION
S-VIDEO R AUDIO LCD TV Models (Except 37/42LF7*) L/MONO VIDEO AV 3
1 2 3
PREPARATION PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI) S-VIDEO
COMPONENT IN R
ANTENNA
IN AUDIO VIDEO AUDIO OPTICAL DIGITAL AUDIO OUT DIGITAL L/MONO
RS-232C IN VIDEO (CONTROL & SERVICE) AV IN 3
4 5 6 7 8 9 1 2 5
PCMCIA EJECT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 CARD SLOT OPTICAL S-VIDEO AV 1 AV 2 S-Video Input DIGITAL AUDIO OUT DIGITAL S-VIDEO Connect S-Video RS-232C IN RGB(PC) AUDIO IN R R out from an S- (CONTROL & SERVICE) (RGB/DVI) ANTENNA VIDEO device. IN RGB IN AUDIO AUDIO Audio/Video MONO MONO VIDEO AUDIO L/ L/ Input COMPONENT IN 4 6 7 3 8
VIDEO VIDEO Connect AV IN 3 AV IN 3 audio/video out- put from an exter- nal device to these jacks.
1 PCMCIA (Personal Computer Memory Card 6 RS-232C IN (CONTROL & SERVICE) PORT International Association) Card Slot AV 1 AV 2 Connect to the RS-232C port on a PC. HDMI IN RGB IN (This feature is not available in all countries.) 12 ANTENNA 7 Component Input IN 2 HDMI Input Connect a component video/audio device to Connect a HDMI signal to HDMI IN. these jacks. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. 8 Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an 3 RGB/DVI Audio Input external device to these jacks. Connect the monitor output from a PC to the VIDEO AUDIO VARIABLE appropriate input port. 9 COMPONENT IN AUDIO OUT Power Cord Socket This TV operates on an AC power. The voltage is 4 Antenna Input indicated on the Specifications page. Never Connect over-the-air signals to this jack. attempt to operate the TV on DC power.
5 DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
8 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
LCD TV Models : 37/42LF7*
S-VIDEO S-Video Input S-VIDEO Connect S-Video out from an S- R PREPARATION
USB IN VIDEO device. R AUDIO R Audio/Video Input AUDIO AUDIO MONO Connect audio/video output from L/ L/MONO L/MONO an external device to these jacks. VIDEO VIDEO VIDEO AV IN 3 AV IN 3 AV IN 2
1 2 3 9
PCMCIA EJECT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 CARD SLOT OPTICAL PCMCIA EJECT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2 CARD SLOT AV 1 AV 2 DIGITAL AUDIO OUT DIGITAL
RS-232C IN RGB(PC) AUDIO IN (CONTROL & SERVICE) (RGB/DVI) RS-232C IN ANTENNA IN RGB IN ANTENNA IN VIDEO AUDIO COMPONENT IN
VIDEO AUDIO 4 5 6 7 8
1 PCMCIA (Personal Computer Memory Card 6 Component Input International Association) Card Slot Connect a component video/audio device to (This feature is not available in all countries.) these jacks.
2 HDMI Input 7 RGB/DVI Audio Input Connect a HDMI signal to HDMI IN. Connect the monitor output from a PC to the Or DVI(VIDEO)signal to HDMI/DVI port with DVI appropriate input port. to HDMI cable. 8 Euro Scart Socket (AV1/AV2) 3 DIGITAL AUDIO OUT OPTICAL Connect scart socket input or output from an Connect digital audio from various types of equip- external device to these jacks. ment. Note: In standby mode, these ports do not work. 9 Power Cord Socket This TV operates on an AC power. The voltage is 4 Antenna Input indicated on the Specifications page. Never Connect over-the-air signals to this jack. attempt to operate the TV on DC power.
5 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
9 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION
STAND INSTALLATION (Only 37 inch LCD TV Models)
1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. PREPARATION
2 Assemble the product stand with the product as shown.
Install the 4 bolts securely, in the back of the 3 product in the holes provided.
ATTACHING THE TV TO A DESK (Only 37LF7*) The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
1-screw Stand
Desk
! WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
10 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
ATTACHING THE TV TO A WALL This feature is not available for all models.
A Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from
falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please PREPARATION make sure that children don’t climb on or hang from the product.
1 1 2 2 or
1 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2 Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.
3
3 Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE G When moving the product to another place undo the ropes first. G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.
11 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION BACK COVER FOR WIRE ARRANGEMENT
Plasma TV models PREPARATION 1 Hold the CABLE MANAGEMENT with both hands and pull it as shown.
45°
CABLE MANAGEMENT
2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section.
3 Reinstall the CABLE MANAGEMENT as shown.
12 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
LCD TV models (Except 37/42LF7*) PREPARATION
1 Connect the cables as necessary.
To connect an additional equipment, see the External equipment Connections section.
2 Install the CABLE MANAGEMENT as shown.
CABLE MANAGEMENT
3 Bundle the cables using the supplied twister holder. (This feature is not available for all models.)
How to remove the cable management
Hold the CABLE MANAGEMENT with both hands and pull it upward.
! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
13 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION
LCD TV model (Only 37/42LF7*) PREPARATION 1 Connect the cables as necessary.
To connect an additional equipment, see the External equipment Connections section.
2 Install the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.)
CABLE MANAGEMENT
Bundle the cables using the supplied twist 3 holder. (This feature is not available for all models.)
How to remove the cable management
Hold the CABLE MANAGEMENT with both hands and pull it out. (Pull it out as holding the loops on the both sides of the cable management.)
! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
14 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent Power Supply possible electric shock. If grounding methods are not pos- sible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to Short-circuit telephone wires, lightening rods, or gas pipes. Breaker PREPARATION DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4" on each side and from the wall.
4 inches
4 inches 4 inches 4 inches
R
When not using the desk-type stand (60PF9* only )
Rubber cap When not using the desk-type stand, install the supplied rubber caps for protecting the desk-type stand fixture as shown at the figure.
WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches
4 inches 4 inches 4 inches
4 inches
If you want to install the desk-type stand fixture protection cover (Plasma TV models only) To prevent the foreign materials from entering the desk-type stand fixture, fix Bolts the desk-type stand fixture protection cover by using the supplied bolts as shown at the figure.
Desk-type stand fixture protection cover
15 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PREPARATION S-VIDEO To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. R
ANTENNA CONNECTION AUDIO L/MONO
For optimum picture quality, adjust antenna direction. VIDEO AV 3 An antenna cable and converter are not supplied.
AV IN 3
S-VIDEO S-VIDEO PREPARATION
PCMCIA EJECT R L/MONO CARD SLOT AUDIO AUDIO R HDMI/DVI IN 1 HDMIL/MONO IN 2 AV 1 AV 2 VIDEO VIDEO AV IN 3
AV 1 AV 2 HDMI IN RGB IN AV 1 AV 2 12 ANTENNA Multi-family Dwellings/Apartments IN RGB IN ANTENNA Wall IN HDMI IN ANTENNA (Connect to wall antenna socket) 12 Antenna IN COMPONENT IN VIDEO AUDIO VARIABLE VIDEO AUDIO VIDEO AUDIO COMPONENT IN AUDIO OUT Socket VARIABLE AUDIO OUT S-VIDEO
RS-232C IN R RF Coaxial Wire (75 ohm) Outdoor AUDIO Antenna L/MONO (VHF, UHF) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) VIDEO AV 3
- Be careful not to bend the bronze wire when connecting to an antenna port. PCMCIA EJECT - 5V antennaCARD SLOT power works In Digital HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 mode only. (Refer to p. 45)
UHF ANTENNA Antenna IN Signal VIDEO AUDIO Amplifier
VHF RS-232C IN
In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
16 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.
When connecting with a component cable
( ) 1 Connect the video outputs Y, PB, PR of the digital set top box to the COMPONENT IN VIDEO jacks on the SETUP EQUIPMENT EXTERNAL set.
2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set.
1 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select COMPONENT input source with using the 4 PCMCIA EJECT PCMCIA EJECT INPUT button on the remoteCARD control. SLOT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AAV 1 AV 2 HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI)
COMPONENT IN
ANTENNA ANTENNA IN IN VIDEO AUDIO VIDEO AUDIO AL DIGITAL AUDIO OUT DIGITAL
RS-232C IN RS-232C IN HDMI3 Signal Component HDMI1/2 (Only 37/42LF7*, 42LY99) 480i/576i Yes No No 480p/576p Yes Yes Yes 720p/1080i PCMCIAYes EJECT Yes Yes CARD SLOT Yes HDMI/DVIYes IN 1 HDMI IN 2 Yes AV 1 AV 2 1080 p (60Hz only) (24Hz/50Hz/60Hz) (24Hz/50Hz/60Hz)
ANTENNA IN VIDEO AUDIO
RS-232C IN
17 Downloaded From TV-Manual.com Manuals PCMCIA EJECT PCMCIA EJECT CARD SLOT CARD SLOT Ofrecido por www.electromanuales.comHDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2
ANTENNA ANTENNA IN IN VIDEO AUDIO VIDEO AUDIO
When connecting with a HDMI cable RS-232C IN RS-232C IN
Except 37/42LF7*, 42LY99 PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 RGB(PC) AUD (RG Connect the digital set-top box to HDMI/DVI IN 1 or 1 COMPONENT I HDMI IN 2 jack on the set. ANTENNA IN VIDEO AUDIAUDIO OPTICAL 2 Turn on the digital set-top box. AUDIO OUT DIGITAL EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL (Refer to the owner’s manual for the digital set-top box.) RS-232C IN 1(CONTROL & SERVICE) 3 Select HDMI1 or HDMI2 input source with using the INPUT button on the remote control.
Only 37/42LF7*, 42LY99
PCMCIA EJECT PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2 1 Connect the digital set-top box to HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the set. OPTIC RS-232C IN RGB(PC) AUD RS-232C IN (CONTROL & SERVICE) (RGB (CONTROL & SERVICE)
ANTENNA IN ANTENNA IN 2 Turn on the digital set-top box. RGB IN (Refer to the owner’s manual for the digital set-top box.)
VIDEO AUDIUDIO VIDEO AUDIO COMPONENT IN 3 Select HDMI1, HDMI2 or HDMI3 input source with 1 using the INPUT button on the remote control.
18 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
When connecting with a HDMI to DVI cable
Except 37/42LF7*, 42LY99
PCMCIA EJECT PCMCIA EJECTECT CARD SLOT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 HDMI/DVI IN 1 HDMI IN 2 RGB IN AAV 1 AV 2 RGB(PC) AUDIO IN 1 Connect the digital set-top box to HDMI/DVI IN 1 (RGB/DVI) jack on the set. COMPONENT IN
ANTENNA ANTENNAENNA IN IN ConnectVIDEO the AUDIOaudio output of the digital set-top box to VIDEO AUDIO 2 OPTICAL DIGITAL AUDIO OUT DIGITAL
the AUDIO IN (RGB/DVI) jack on the set. SETUP EQUIPMENT EXTERNAL
RS-232C IN 1 RS-232C IN 2 (CONTROL & SERVICE) 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
PCMCIA EJECT Select HDMI1 input source with using the INPUT CARD SLOT 4 HDMI/DVI IN 1 HDMI IN 2 button on theAV remote1 AV 2control.
ANTENNA IN VIDEO AUDIO
RS-232C IN Only 37/42LF7*, 42LY99
PCMCIA EJECT PCMCIA EJECTCT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2
Connect the digital set-top box to HDMI/DVI IN 1 OPTICAL 1 OUT AUDIO DIGITAL RS-232C IN jack on the set. RS-232C IN RGB(PC) AUDIO IN (CONTROL & SERVICE) (CONTROL & SERVICE) (RGB/DVI)
ANTENNA IN ANTENNA IN RGB IN 2 Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the set. VIDEO AUDIO VIDEO AUDIO 1 COMPONENT IN 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4 Select HDMI1 input source with using the INPUT button on the remote control.
19 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting with a component cable
Connect the video outputs (Y, PB, PR) of the DVD to the 1 COMPONENT IN VIDEO jacks on the set.
EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set.
3 Turn on the DVD player, insert a DVD. 1 2 4 Select COMPONENT input source with using the INPUT button on the remote control. S-VIDEO 5 Refer to the DVD player's manualPCMCIA for operatingEJECT CARD SLOT instructions. HDMI/DVI IN 1 HDMI IN 2 RGB IN AAV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI) R
COMPONENT IN AUDIO
ANTENNA IN L/MONO VIDEO AUDIO DIGITAL AUDIO OUT DIGITAL VIDEO AV IN 3 RS-232C IN Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV YPB PR PCMCIA EJECT CARD SLOT Y PB PR HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 Video output ports Y B-Y R-Y PCMCIA EJECT CARD SLOT on DVD player Y Cb Cr HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 Y Pb Pr ANTENNA IN VIDEO AUDIO ANTENNA IN VIDEO AUDIO RS-232C IN
RS-232C IN
20 Downloaded From TV-Manual.com Manuals S-VIDEO
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 R
Ofrecido por www.electromanuales.com AUDIO
ANTENNA IN L/MONO VIDEO AUDIO VIDEO AV IN 3 RS-232C IN When connecting with a Euro Scart
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 Connect the Euro scart socket of the DVD to the AV1 C) AUDIO IN 1 (RGB/DVI) PCMCIA EJECT Euro scart socket on the set. CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 PONENT IN
2 Turn on the DVD player,ANTENNA insert a DVD. IN VIDEO AUDIO AV1 INPUT ANTENNA 3 Select input source with using the button IN on the remote control. SETUP EQUIPMENT EXTERNAL VIDEO AUDIO If connected to AV2 Euro scart socket,RS-232C IN select AV2 input source. 1 RS-232C IN
4 Refer to the DVD player's manual for operating instructions.
AUDIO/ (R) AUDIO (L) VIDEO ! NOTE G If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
When connecting with an S-Video cable VIDEO S-VIDEO L R ANT IN
Connect the S-VIDEO output of the DVD to the S - OUTPUT ANT OUT 1 VIDEO input on the set. SWITCH
1 2 2 Connect the audio outputs of the DVD to the AUDIO PCMCIA EJECT input jacks on the set. CARD SLOT S-VIDEO HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 R Turn on the DVD player, insert a DVD. 3 AUDIO
ANTENNA MONO IN 4 Select AV3 input source with using the INPUT button L/ VIDEO AUDIO on the remote control. VIDEO
AV IN 3 RS-232C IN 5 Refer to the DVD player's manual for operating instruc- tions.
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 21 Downloaded From TV-Manual.com Manuals PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2
ANTENNA IN VIDEO AUDIO ANTENNA IN VIDEO AUDIO RS-232C IN
RS-232C IN S-VIDEO
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 R AUDIO
ANTENNA IN L/MONO VIDEO AUDIO VIDEO AV IN 3 RS-232C IN Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 RGB(PC) AUD When connecting HDMI cable (RGB ANTENNA IN COMPONENT IN VIDEO AUDIO ANTENNA Except 37/42LF7*, 42LY99 IN VIDEO AUDIO OPTICAL RS-232C IN AUDIO OUT DIGITAL 1 Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI IN 2 jack on the set. 1 RS-232C IN (CONTROL & SERVICE)
2 Select HDMI1or HDMI2 input source with using the INPUT button on the remote control. EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL 3 Refer to the DVD player's manual for operating instructions.
PCMCIA EJECT PCMCIA EJECT Only 37/42LF7*, 42LY99 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3 AV 1 AV 2
OPTICA Connect the HDMI output of the DVD to the 1 RS-232C IN RGB(PC) AUDIO RS-232C IN HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack (CONTROL & SERVICE) (RGB/D (CONTROL & SERVICE) ANTENNA IN ANTENNA IN on the set. RGB IN
2 Select HDMI1, HDMI2 or HDMI3 input source with VIDEO AUDIO VIDEO AUDIO using the INPUT button on the remote control. 1 COMPONENT IN
3 Refer to the DVD player's manual for operating instructions.
! NOTE G TV can receive the video and audio signal simultaneously with using a HDMI cable. G If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. INSERTION OF CI MODULE (This feature is not available in all countries.) PCMCIA EJECT CARD SLOT - To view the scrambled (pay) services in digital TV HDMI IN 1 HDMI IN 2 AV 1 AV 2 mode. 1
ANTENNA Insert the CI Module to PCMCIA (Personal Computer IN TVTVTV VIDEO AUDIO 1 Memory Card International Association) CARD SLOT OPTICA of TV as shown. RS-232RS-232C IN (CONTROL & For further information, see p.48.
22 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of PCMCIA EJECT the screen may CARDremain SLOT visible on the screen. HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 When connecting with an antenna
ANTENNA IN ANT OUT S-VIDEO VIDEO L R EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL VIDEO AUDIO OPTICAL 1 DIGITAL AUDIO OU DIGITAL
RS-232C IN OUTPUT (CONTROL & SERVICE) ANT IN SWITCH
Wall Jack S-VIDEO 2 R
Antenna AUDIO L/MONO VIDEO
PCMCIA EJECT AV IN 3 CARD SLOT Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the set. HDMI/DVI IN 1 HDMI IN 2 1 AV 1 AV 2
2 Connect the antenna cable to the ANT IN socket of the VCR. ANTENNA IN VIDEO AUDIO 3 Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.
RS-232C IN S-VIDEO R AUDIO L/MONO VIDEO AV IN 3 23 Downloaded From TV-Manual.com Manuals PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2
ANTENNA IN VIDEO AUDIO
RS-232C IN
Ofrecido por www.electromanuales.com S-VIDEO
EXTERNAL EQUIPMENT SETUP R AUDIO L/MONO When connecting with a Euro Scart VIDEO
PCMCIA EJECT AV IN 3 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 B(PC) AUDIO IN Connect the Euro scart socket of the VCR to the AV1 (RGB/DVI) PCMCIA EJECT CARD SLOT 1 HDMI/DVI IN 1 HDMI IN 2 Euro scart AVsocket 1 AVon 2the set. MPONENT IN
ANTENNA 2 Insert a video tape into the IN VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) VIDEO AUDIO ANTENNA IN VIDEO AUDIO Select AV1 input source with using theRS-232C IN INPUT button EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL 3 on the remote control. S-VIDEO RS-232C IN 1 If connected to AV2 Euro scart socket, select AV2 4 R input source. AUDIO S-VIDEO R L/MONO AUDIO AUDIO/ (R) AUDIO (L) VIDEO VIDEO AV IN 3 L/MONO
! NOTE VIDEO PCMCIA EJECT AV IN 3 CARD SLOT G HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
ANTENNA IN VIDEO AUDIO When connecting with a RCA cable RS-232C IN
Connect the AUDIO/VIDEO jacks between TV and 1 S-VIDEO
VCR. Match the jack colors (Video = yellow, Audio Left R = white, and Audio Right = red) AUDIO
MONO 1 2 Insert a video tape into the VCR and press PLAY on L/ the VCR. (Refer to the VCR owner’s manual.) VIDEO
AV IN 3 3 Select AV3 input source using the INPUT button on the remote control.
S-VIDEO VIDEO L R ANT IN ! NOTE OUTPUT ANT OUT SWITCH G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.
24 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 When connecting with an S-Video cable
ANTENNA IN S-VIDEO VIDEO L R ANT IN VIDEO AUDIOConnect the S-VIDEO output of the VCR to the S - 1 VIDEO input on the set. The picture quality is
RS-232C IN improved; compared to normal composite (RCA cable) OUTPUT ANT OUT input. SWITCH
1 2 2 Connect the audio outputs of the VCR to the AUDIO
input jacks on the set. S-VIDEO EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL R Insert a video tape into the VCR and press PLAY on the 3 AUDIO VCR. (Refer to the VCR owner’s manual.) MONO L/ Select AV3 input source with using the INPUT button on
4 VIDEO the remote control. PCMCIA EJECT AV IN 3 CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2
! NOTE
ANTENNA G IN If both S-VIDEO and VIDEO sockets have been connected to VIDEO AUDIO the S-VHS VCR simultaneously, only the S-VIDEO can be received.
RS-232C IN
DIGITAL AUDIO OUT SETUP S-VIDEO R Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port. AUDIO
PCMCIA EJECT CARD SLOT L/MONO HDMI/DVI IN 1 HDMI IN 2 R AV 1 AV 2 1 Connect one end of an optical cable to the TV Digital RGB(PC
Audio (Optical) Output port. VIDEO
AV IN 3 COMP 2 Connect the other end of the optical cable to the digi- ANTENNA ( ) IN tal audio optical input on the audio equipment. VIDEO AUDIO OPTICAL 1 AUDIO OUT DIGITAL Set the “TV Speaker option - Off” in the AUDIO menu. 3 RS-232C IN (Gp.78). See the external audio equipment instruction (CONTROL & SERVICE) manual for operation.
2 CAUTION
GDo not look into the optical output port. Looking at the laser beam may damage your vision.
25 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL VIDEO L R S-VIDEO R AUDIO
1 MONO L/ VIDEO
AV IN 3
1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)
2 Select AV3 input source with using the INPUT button on the remote control.
3 Operate the corresponding external equipment. Refer to external equipment operating guide.
26 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable
PCMCIA EJECT PCMCIA EJECT CARD SLOT CARD SLOT RGB IN HDMI/DVI IN 1 HDMIHDMI/DVI IN 2 IN 1 HDMI IN 2 AV 1 AV 2 RGB(PC) AUDIO IN AV 1 AV 2 (RGB/DVI) Connect the RGB output of the PC to the RGB (P C) 1 COMPONENT IN jack on the set. ANTENNA ANTENNA IN IN VIDEO AUDIO VIDEO AUDIO SETUP EQUIPMENT EXTERNAL DIGITAL AUDIO OUT DIGITAL Connect the PC audio output to the AUDIO IN 2 RS-232C IN (RGB/DVI) jack on the set. RS-232C IN SERVICE)
3 Turn on the PC and the set. 1 2
4 Select RGB input source with using the INPUT button on the remote control.
RGB OUTPUT AUDIO
When connecting with a HDMI to DVI cable
PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV 2 RGB(PC) AUDIO IN PCMCIA EJECT (RGB/DVI) CARD SLOT Connect the DVI output of the PC to the HDMI/DHDMI/DVIVI IN 1 HDMI IN 2 AV 1 AV 2 1 COMPONENT IN IN 1 jack on the set. ANTENNA IN VIDEO AUDIO OPTICAL DIGITAL AUDIO OUT DIGITAL ANTENNA 2 Connect the PC audio output to the AU D INIO IN RS-232CVIDEO IN AUDIO (RGB/DVI) jack on the set. (CONTROL & SERVICE)1 2
RS-232C IN 3 Turn on the PC and the set
4 Select HDMI1 input source with using the INPUT button on the remote control.
DVI-PC OUTPUT AUDIO
! NOTE G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. G If the PC does not support Auto DVI, you need to set the output resolution appropriately.
27 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP
! NOTE
G To enjoy vivid picture and sound, connect a PC to PC to the HDMI IN (or HDMI/DVI IN) port on the the set. set. G Avoid keeping a fixed image on the set’s screen for G Connect the audio cable from the PC to the Audio a long period of time. The fixed image may become input on the set. (Audio cables are not included permanently imprinted on the screen; use a screen with the set). saver when possible. G If using a sound card, adjust PC sound as required. G Connect PC to the RGB (PC) or HDMI IN (or G This set uses a VESA Plug and Play Solution. The HDMI/DVI IN) port of the set; change the resolu- set provides EDID data to the PC system with a tion output of PC accordingly. DDC protocol. The PC adjusts automatically when EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL G There might be noise according to some resolution, using this set. vertical pattern, contrast or brightness in PC mode. G DDC protocol is preset for RGB (Analog RGB), Change the PC mode into another resolution or HDMI (Digital RGB) mode. change the refresh rate into another rate or adjust G If required, adjust the settings for Plug and Play the brightness and contrast on the menu until the functionally. picture is clean. If the refresh rate of the PC graph- G If graphic card on the PC does not output analog ic card can not be changed, change the PC graph- and digital RGB simultaneously, connect only one ic card or consult it to the manufacturer of the PC of either RGB or HDMI IN (or HDMI/DVI IN) to graphic card. display the PC on the set. G The synchronization input waveform for Horizontal G If graphic card on the PC does output analog and and Vertical frequencies are separate. digital RGB simultaneously, set the set to either G We recommend using 1920x1080 (Reduced RGB or HDMI; (the other mode is set to Plug and Blanking Timing), 60Hz for the PC mode, they pro- Play automatically by the set.) vide the best picture quality. G DOS mode may not work depending on video card G In Plasma TV models, we recommend using if you use a HDMI to DVI cable. 1024x768, 60Hz for the PC mode, they provide G When you use too long RGB-PC cable, there might the best picture quality. be a noise on the screen. We recommend using G Connect the signal cable from the monitor output under 5m of the cable. It provides the best picture port of the PC to the RGB (PC) port of the set or quality. the signal cable from the HDMI output port of the
28 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Supported Display Resolution RGB[PC] / HDMI[PC] mode HDMI[DTV] mode
Horizontal Vertical Horizontal Vertical Resolution Frequency(KHz) Frequency(Hz) Resolution Frequency(KHz) Frequency(Hz) 720x400 31.468 70.08 31.469 59.94 31.469 59.94 640x480 640x480 31.469 60.00 37.500 75.00 31.47 59.94 37.879 60.31 720x480 SETUP EQUIPMENT EXTERNAL 800x600 31.50 60.00 46.875 75.00 720x576 31.25 50.00 832x624 49.725 74.55 37.50 50.00 48.363 60.00 1280x720 44.96 59.94 1024x768 56.476 70.00 45.00 60.00 60.023 75.03 33.72 59.94 1280x768 47.693 59.99 1920x1080i 33.75 60.00 1360x768 47.649 59.94 28.125 50.00 1366x768 47.649 59.94 27.00 24.00 1280x1024 63.595 60.00 56.25 50.00 1920x1080p 1400x1050 65.160 60.00 67.433 59.94 1600x1200 74.077 60.00 67.500 60.00 1920x1080 66.647 59.99
: HDMI[PC] mode only
! NOTE
G Reduced Blanking Timing is applied with 1600x1200, 1920x1080 in RGB[PC] / HDMI[PC] mode. G 60PF9* isn’t supported to 800x600, 75.00Hz in RGB[PC] mode.
29 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP
INFO i S GUIDE UBTITLE TV/RADIO Screen Setup for PC mode SLEEP BACK RATIO PICTURE I/II SOUND BACK INFO i MENU TEXT Auto Configure (RGB [PC] mode only) MENU EXIT EXIT GUIDE
OK OK Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjust- FAV ment. VOL PR
VOL Q.VIEW PR MUTE MUTE EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL 123 Auto configure
This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress.
SETUPO Auto Config. Manual Config. Press the MENU button and then use D or E button PICTUREO 1 AUDIOO XGA Mode Aspect Ratio to select the SCREEN menu. TIMEO Reset OPTIONO 2 Press the G button and then use D or E button to SCREENO select Auto Config..
G 3 Press the button to start Auto Config.. Move MENU Prev.
• When Auto Config. has finished, OK will be shown 1 on screen. • If the position of the image is still not correct, try
Auto adjustment again. Auto Config. G To Set Manual Config. XGA Mode • If picture needs to be adjusted more after Auto adjust- Aspect Ratio ment in RGB (PC), you can adjust the Manual Reset Config..
4 Press the EXIT button to return to normal TV viewing.
2 3
30 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND BACK INFO i MENU TEXT Adjustment for screen Phase, Clock, Position MENU EXIT EXIT GUIDE
OK OK If the picture isn’t clear after auto adjustment and espe- cially if characters are still trembling, adjust the picture phase manually. FAV VOL PR
It’s not available to use this function in 1:1 Pixel mode. VOL Q.VIEW PR MUTE MUTE EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL To correct the screen size, adjust Clock. 123
This function works in the following mode : RGB[PC]. SETUPO Auto Config. PICTUREO Manual Config. Clock This function is to minimize any vertical bars or AUDIOO XGA Mode Aspect Ratio TIMEO stripes visible on the screen background. And the Reset horizontal screen size will also change. OPTIONO SCREENO
Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Move MENU Prev. 1
Auto Config. Manual Config. G Phase 0 XGA Mode Clock 0 Aspect Ratio H-Position 0 Reset 1 Press the MENU button and then use D or E button V-Position 0 to select the SCREEN menu.
2 Press the G button and then D or E button to select Manual Config..
3 Press the G button and then D or E button to select 2 3 4 Phase, Clock, H-Position or V-Position.
4 Press the F or G button to make appropriate adjust- ments.
5 Press the EXIT button to return to normal TV viewing.
31 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
EXTERNAL EQUIPMENT SETUP
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND Selecting Wide XGA mode BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE To see a normal picture, match the resolution of RGB mode
and selection of XGA mode. OK OK This function works in the following mode: RGB[PC] mode
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123 EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL
SETUPO Auto Config. PICTUREO Manual Config. D E 1 Press the MENU button and then use or button AUDIOO XGA Mode Aspect Ratio to select the SCREEN menu. TIMEO Reset OPTIONO 2 Press the G button and then use D or E button to SCREENO select XGA Mode.
G D E 3 Press the button and then use or button to Move MENU Prev. select the desired XGA resolution. 1 4 Press the EXIT button to return to normal TV viewing.
Auto Config. Manual Config. XGA Mode G 1024 X 768 Aspect Ratio 1280 X 768 Reset 1360 X 768 1366 X 768
2 3
32 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND BACK INFO i Initializing MENU TEXT (Reset to original factory settings) MENU EXIT EXIT GUIDE
OK OK This function operates in current mode. To initialize the adjusted value
FAV It’s not available to use ISM Method and Low power in VOL PR
LCD TV models. VOL Q.VIEW PR MUTE MUTE 123 EXTERNAL EQUIPMENT SETUP EQUIPMENT EXTERNAL
SETUPO Language Press the MENU button and then D or E button to PICTUREO Country 1 AUDIOO Lock System Parental Control select the OPTION menu. TIMEO Input Label OPTIONO SIMPLINK 2 Press the G button and then D or E button to select SCREENO Factory Mode Factory Mode.
G D E 3 Press the button and then or button to select Move MENU Prev. Factory Reset. 1 4 Press the OK button.
The message “If you enter a password, all user Language Set ID setting will be reset” will appear. Country 1 Lock System Factory Reset Parental Control OK Use NUMBER buttons to input a 4-digit password. Input Label 5 SIMPLINK ISM Method Factory Mode G Normal Low Power Off
2
Language Set ID Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode Normal Low Power Off
3 4
33 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 37/42/47/52LY9*, 50/60PF9*) When using the remote control, aim it at the remote control sensor on the TV.
D/A Selects digital or analogue mode. D/A POWER INPUT Switches the set on from standby.
POWER Switches the set on from standby or off to standby. DVD TV VCR
INFO i S GUIDE UBTITLE INPUT External input mode rotate in regular sequence. TV/RADIO SLEEP BACK MODE Selects the remote operating modes. RATIO PICTURE I/II SOUND
TEXT GUIDE Shows programme schedule. MENU EXIT WATCHINGPROGRAMME/ CONTROLTV INFO i Shows the present screen information.
OK SUBTITLE Recalls your preferred subtitle in digital mode.
THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
VOL Q.VIEW PR MUTE Coloured These buttons are used for teletext (only TELETEXT buttons models) or Programme edit.
1 2 3
4 5 6 VOLUME UP Adjusts the volume. /DOWN 789 MUTE Switches the sound on or off. LIST 0 FAV Q.VIEW Returns to the previously viewed programme.
SIZE UPDATE INDEX HOLD i Programme Selects a programme. TIME REVEAL UP/DOWN ? 0~9 number Selects a programme. button Selects numbered items in a menu.
LIST Displays the programme table. FAV Displays the selected favourite programme.
VCR/DVD Controls some video cassette recorders or DVD players control buttons when you have already selected DVD or VCR mode button. Control connected AV devices by pressing the D or E or F or G, OK buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. (The button does not provide such functions.)
34 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
See a list of AV devices connected to TV. D/A POWER INPUT When you toggle this button, the Simplink menu appears at the screen.
DVD TV VCR SLEEP Sets the sleep timer.
INFO i S GUIDE UBTITLE TV/RADIO BACK Allow the user to move back one step in an interactive SLEEP BACK application, EPG or other user interaction function.
PICTURE RATIO SOUND I/II Selects Radio or TV channel in digital mode. 1 TV/RADIO TEXT MENU EXIT I/II Selects the sound output. WATCHINGPROGRAMME/ CONTROLTV
OK RATIO Selects your desired picture format.
PICTURE Adjusts the factory preset picture according to the room.
SOUND To select the sound appropriate to your viewing programme.
MENU Selects a menu. VOL Q.VIEW PR MUTE 1 TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 2 3 EXIT Clears all on-screen displays and returns to TV viewing 4 5 6 from any menu. 789
LIST 0 FAV
SIZE UPDATE INDEX HOLD 1 i TIME REVEAL Installing Batteries ?
Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones. Close cover.
35 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS (Only 37/42/47/52LF6*, 37/42LF7*) When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the set on from standby or off to standby. INPUT MODE D/A POWER TV D/A INPUT Selects digital or analogue mode. TV/RADIO DVD Switches the set on from standby. INPUT BRIGHT VCR TV/RADIO Selects Radio or TV channel in digital mode.
SIMPLINK TEXT RATIO I/II INPUT External input mode rotate in regular sequence. Switches the set on from standby.
WATCHINGPROGRAMME/ CONTROLTV Brightness Adjusts screen brightness. adjustment It returns to the default settings brightness by changing mode source.
BACK INFO i MENU EXIT GUIDE Coloured These buttons are used for teletext (only TELETEXT buttons models) or Programme edit.
OK EXIT Clears all on-screen displays and returns to TV viewing from any menu.
BACK Allow the user to move back one step in an interactive application, EPG or other user interaction function. FAV VOL PR MENU Selects a menu.
MUTE INFO i Shows the present screen information.
123 GUIDE Shows programme schedule.
456 VOLUME UP Adjusts the volume. 789 /DOWN
LIST 0 Q.VIEW FAV Displays the selected favourite programme.
MUTE Switches the sound on or off. UPDATE INDEX TIME Programme Selects a programme. ? UP/DOWN SLEEP HOLD REVEAL 0~9 number Selects a programme. SUBTITLE button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
36 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
MODE Selects the remote operating modes. INPUT MODE D/A POWER TV See a list of AV devices connected to TV. TV/RADIO DVD INPUT BRIGHT When you toggle this button, the Simplink menu appears VCR at the screen. 1 TELETEXT These buttons are used for teletext. SIMPLINK TEXT RATIO I/II BUTTONS 1 For further details, see the ‘Teletext’ section.
RATIO Selects your desired picture format.
I/II Selects the sound output. WATCHINGPROGRAMME/ CONTROLTV
VCR/DVD Controls some video cassette recorders or DVD players BACK INFO i MENU control buttons when you have already selected DVD or VCR mode button. EXIT GUIDE Control connected AV devices by pressing the D or E or F or G, OK buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. OK (The button does not provide such functions.)
THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference. Right)
FAV OK Accepts your selection or displays the current mode. VOL PR
MUTE SLEEP Sets the sleep timer. 123 SUBTITLE Recalls your preferred subtitle in digital mode. 456
789 Installing Batteries LIST 0 Q.VIEW
1 UPDATE INDEX TIME ? SLEEP HOLD REVEAL
SUBTITLE Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones. Close cover.
37 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
TURNING ON THE TV - If your TV will be turned on, you will be able to use its features.
D/A POWER INPUT
First, connect power cord correctly. DVD 1 TV VCR At this moment, the TV switches to standby mode.
2 In standby mode to turn TV on, press the r / I, INPUT or
PR D or E button on the TV or press the POWER, INPUT, VOL Q.VIEW PR D/A, PR D or E (or PR + or -) or NUMBER button on MUTE WATCHINGPROGRAMME/ CONTROLTV the remote control and then the TV will switch on. 1 2 3
Initializing setup 4 5 6 789 If the OSD (On Screen Display) is displayed on the screen as figure after turning on the set, you can adjust the LIST 0 FAV Language, Country, Time Zone, Auto programme tuning. SIZE UPDATE INDEX HOLD
Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the BACK button to change current OSD into previous OSD. INPUT MODE D/A POWER TV
TV/RADIO DVD INPUT BRIGHT VCR
FAV VOL PR
MUTE
123
456
789
LIST 0 Q.VIEW
38 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PROGRAMME SELECTION
INFO i S GUIDE UBTITLE Press the PR D or E (or PR + or -) or NUMBER buttons TV/RADIO 1 to select a programme number. SLEEP BACK RATIO PICTURE I/II SOUND
TEXT MENU EXIT
OK WATCHINGPROGRAMME/ CONTROLTV
VOLUME ADJUSTMENT VOL Q.VIEW PR MUTE
1 2 3
4 5 6 1 Press the VOL D or E (or VOL + or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button. VCR
SIMPLINK TEXT RATIO I/II You can cancel this function by pressing the MUTE, VOL D or E (or VOL + or -), or I/II button.
BACK INFO i MENU EXIT GUIDE
OK
FAV VOL PR
MUTE
123
39 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
1 Press the MENU button and then D or E button to display each menu.
2 Press the G button and then D or E button to select a menu item.
3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to the higher level menu by pressing the O K or MENU button.
SETUPO Auto Tuning SETUPO Picture Mode PICTUREO Manual Tuning PICTUREO Colour Temperature
WATCHINGPROGRAMME/ CONTROLTV AUDIOO Programme Edit AUDIOO 5V Antenna Power Advanced TIMEO TIMEO Software Update Picture Reset OPTIONO Diagnostics OPTIONO Demo SCREENO CI Information : This feature is not SCREENO * available in all countries.
Move MENU Prev. Move MENU Prev.
SETUPO Auto Config. SETUPO Sound Mode PICTUREO Manual Config. PICTUREO Auto Volume AUDIOO XGA Mode AUDIOO Balance 0 Aspect Ratio TV Speaker TIMEO TIMEO Reset Digital Audio Out OPTIONO OPTIONO SCREENO SCREENO
Move MENU Prev. Move MENU Prev.
SETUPO Language SETUPO Clock PICTUREO Country PICTUREO Off Time AUDIOO Lock System AUDIOO On Time Parental Control Auto Sleep TIMEO TIMEO Input Label Time Zone OPTIONO SIMPLINK OPTIONO SCREENO Factory Mode SCREENO
Move MENU Prev. Move MENU Prev.
! NOTE
G It’s not available to use ISM Method and Low power in LCD TV models. G In Analogue mode, 5V Antenna Power, CI Information, Software Update and Diagnostics will not display.
40 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE AUTO PROGRAMME TUNING I/II SOUND BACK INFO i MENU TEXT (IN DIGITAL MODE) MENU EXIT EXIT GUIDE
OK OK Use it to automatically find and store all of the programmes.
When you start auto programming in digital mode, all the FAV stored service information will be deleted. VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Auto Tuning Manual Tuning Press the MENU button and then D E button to PICTUREO 1 or AUDIOO Programme Edit WATCHINGPROGRAMME/ CONTROLTV 5V Antenna Power select the SETUP menu. TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then D or E button to select Auto Tuning.
Move MENU Prev. 1 3 Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in
Lock System ‘On’. Auto Tuning G Start Manual Tuning Programme Edit The message “All service-information will be 5V Antenna Power Software Update updated. Continue?” will appear. Diagnostics CI Information
If you want to keep on auto tuning select YES with using the F or G button. Then, press the OK button. Otherwise select NO. 2
To stop auto tuning, press the MENU button. Auto Tuning
0 Programme(s) 0 Programme(s)
4 Press the EXIT button to return to normal TV viewing. UHF CH. 14 24 %
MENU Stop 3
41 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE MANUAL PROGRAMME TUNING I/II SOUND BACK INFO i MENU TEXT (IN DIGITAL MODE) MENU EXIT EXIT GUIDE
OK OK Manual Tuning lets you manually add a programme to your programme list.
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Auto Tuning Manual Tuning Press the MENU button and then D E button to PICTUREO WATCHINGPROGRAMME/ CONTROLTV 1 or AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then D or E button to select Manual Tuning.
Move MENU Prev. 1 3 Press the G button and then D or E button or NUM- BER buttons to select the desired channel number.
Use NUMBER buttons to input a 4-digit password in Auto Tuning Lock System ‘On’. Manual Tuning G Your receiver will Programme Edit add this channel to 5V Antenna Power your channel list. Software Update Diagnostics UHF CH. 35 4 Press the OK button to save. CI Information
When the channel number you want to add is already added in programme list, the massage “Setup infor- 2 mation for the channel will be updated. Continue?” will appear.
Auto Tuning Manual Tuning Your receiver will Programme Edit add this channel to If you want to keep on manual tuning, select YES 5V Antenna Power your channel list. Software Update D 35 with using the F or G button. Diagnostics UHF CH E CI Information
Then, press the OK button. Otherwise select NO. Search 3 4 5 Press the EXIT button to return to normal TV viewing.
42 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
RATIO PICTURE I/II SOUND
TEXT EXIT BACK INFO i MENU MENU PROGRAMME EDIT EXIT GUIDE
OK (IN DIGITAL MODE) OK
When a programme number is skipped, it means that you will be unable to select it using PR D or E (or PR + or -) but- FAV ton during TV viewing. VOL PR VOL Q.VIEW PR MUTE If you want to select the skipped programme, directly enter MUTE 123 the programme number with the NUMBER buttons or select 1 2 3 it in the Programme edit menu. 456 456
789 789
This function enables you to skip the stored programmes. LIST 0 FAV LIST 0 Q.VIEW
SIZE UPDATE INDEX HOLD
It’s available in some countries only to move a programme WATCHINGPROGRAMME/ CONTROLTV i POSITION INDEX TIME number by YELLOW button. TIME REVEAL ?
SETUPO Auto Tuning 1 Press the MENU button and then D or E button to PICTUREO Manual Tuning AUDIOO Programme Edit select the SETUP menu. 5V Antenna Power TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then D or E button to select Programme Edit menu.
Move MENU Prev. 1 3 Press the G button to enter the Programme Edit menu.
Use NUMBER buttons to input a 4-digit password in Auto Tuning Lock System ‘On’. Manual Tuning Programme Edit G To Set 5V Antenna Power Software Update Diagnostics 4 Select a programme to be stored or skipped with the CI Information D or E or F or G button.
Press the BLUE button repeatedly to have the pro- 5 2 3 gramme skipped or stored.
In case of programmes to be skipped, skipped pro- gramme shows in blue colour and these programmes will not be selected by the PR D or E (or PR + or -) buttons during TV viewing.
6 Press the EXIT button to return to normal TV viewing.
43 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
Mini Glossary
Displayed when the DTV Programme. TEXT Displayed when the Teletext Programme. Displayed when the Locked Programme. Displayed when the Subtitle Programme. Displayed when the Radio Programme. Displayed when the Scramble Programme. Displayed when the MHEG Programme. Displayed when the Dolby Programme.
A Skipping a programme number
1 Select a programme number to be skipped with the D or E or F or G button.
2 Press the BLUE button. The skipped programme number turns to blue. WATCHINGPROGRAMME/ CONTROLTV
3 Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR D or E (or PR + or -) button during normal TV viewing.
If you want to select the skipped programme, directly enter the programme number with the NUMBER but- tons or select it in the programme edit or EPG.
4 Press the EXIT button to return to TV viewing.
A Locking a programme (In Lock System On mode only)
1 Select a programme to be locked with the D or E or F or G button.
2 Press the GREEN button. The lock mark will appear in front of that programme number.
3 Press the GREEN button again to release this function.
Note : G To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number! G If you forgot your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset. G If you select other programme after releasing a locked programme and then return to the locked programme within 1 minute, you needn’t input a password to select the locked programme.
A Selecting favourite programme
1 Select your favourite programme number by pressing D or E or F or G button and then press the FAV but- ton on your remote control handset.
It will automatically include the selected programme into your favourite programme list.
44 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE 5V ANTENNA POWER I/II SOUND BACK INFO i MENU TEXT (IN DIGITAL MODE ONLY) MENU EXIT EXIT GUIDE
OK OK Even if there isn’t a special 5V adapter power in the external antenna, this function can output 5V in the set.
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning 1 AUDIOO Programme Edit WATCHINGPROGRAMME/ CONTROLTV 5V Antenna Power select the SETUP menu. TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then use D or E button to select 5V Antenna Power.
Move MENU Prev. 1 3 Press the G button and then use D or E button to select On or Off.
Auto Tuning Manual Tuning In 5V Antenna Power On, if the set is short-cir- Programme Edit cuit, it will automatically return to Off. 5V Antenna Power G Off Software Update On Diagnostics CI Information The message “Antenna feed overloaded. Automatically switched off.” will appear.
2 3 4 Press the EXIT button to return to normal TV viewing.
45 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND SOFTWARE UPDATE BACK INFO i MENU TEXT (IN DIGITAL MODE ONLY) MENU EXIT EXIT GUIDE
OK OK Software Update, means software can be downloaded through the digital terrestrial broadcasting system.
FAV VOL PR
VOL Q.VIEW PR 1 Press the MENU button and then D or E button to MUTE MUTE select the SETUP menu. 123
2 Press the G button and then D or E button to select Software update. SETUPO Auto Tuning PICTUREO Manual Tuning
WATCHINGPROGRAMME/ CONTROLTV AUDIOO Programme Edit 5V Antenna Power Press the G button and then D E button to select TIMEO 3 or Software Update Off or On. OPTIONO Diagnostics SCREENO CI Information • If you select On, a user confirm message box will be displayed to notify that new software is found.
Move MENU Prev. 4 Press the EXIT button to return to normal TV viewing. 1
Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update G Off Diagnostics On CI Information * When setting “Software Update”
Occasionally, a transmis- sion of updated digital software information will 2 3 result in the following menu on the TV screen. - During Progress of Software Update, please note the following: Select the YES using the F or G button and when • The power of the set must not be interrupted. you see the following • The set must not be switched off. picture. • The antenna must not be disconnected. • During this time, you should not switch off the power to the set. • At this time, you should not work power After Software Update is On/Off. completed, the System • After Software Update, you can confirm the takes about one minute to updated software version in Diagnostics restart. menu.
46 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND DIAGNOSTICS BACK INFO i MENU TEXT (IN DIGITAL MODE ONLY) MENU EXIT EXIT GUIDE
OK OK This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version.
FAV It’s displayed the information and signal strength of the VOL PR
turned MUX. VOL Q.VIEW PR It’s displayed the signal information and service name of the MUTE MUTE selected MUX. 123
SETUPO
Auto Tuning WATCHINGPROGRAMME/ CONTROLTV Press the MENU button and then D or E button to PICTUREO Manual Tuning 1 AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then use D or E button to select Diagnostics.
Move MENU Prev.
3 Press the G button to display Manufacturer, 1 Model/Type, Serial Number and Software Version.
Auto Tuning Press the EXIT button to return to normal TV viewing. Manual Tuning 4 Programme Edit 5V Antenna Power Software Update Diagnostics G To Set CI Information
2
Engineeringi DiagnosticsChannel 30 Manufacturer : LG Electronics Inc. Model / TypeTransmitter : 37LC2D-EC : Teracom_Mux_2 Serial No.Signal : 604KG0000006 Strength 53% Software Version : 1.1.0 Signal Quality 100% CH 30 CH 34 D 1 YLE PEU 1 YLE TV1 3 YLE TV2 4 YLEQ 5 YLE FST 6 YLEN KLASS 7 YLE FSR+ 8 YLE24 E Menu Prev. SelectBack
3
47 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE CI [COMMON INTERFACE] I/II SOUND BACK INFO i MENU TEXT INFORMATION MENU EXIT EXIT GUIDE (IN DIGITAL MODE ONLY) OK OK This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you can’t watch the pay FAV services. When the module is inserted to CI slot, you can access VOL PR
the module menu. VOL Q.VIEW PR To purchase a module and smart card, contact your supplying MUTE MUTE dealer. Do not often insert or remove a CAM module from the set. 123 It may cause a trouble. When the set turned on after inserting the CI Module, you often can’t hear the sound.
There might be unnatural picture according to CI module and
WATCHINGPROGRAMME/ CONTROLTV smart card.
CI (Common Interface) function may not be applied based on country broadcasting circumstance.
SETUPO Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning 1 AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information 2 Press the G button and then D or E button to select CI Information.
Move MENU Prev. 1 3 Press the G button and then OK button.
4 Press the D or E button to select the desired item: Auto Tuning Manual Tuning Module information, smart card information, lan- Programme Edit guage, or software download etc. 5V Antenna Power Software Update Diagnostics CI Information G Module 5 Press the OK button.
6 Press the EXIT button to return to normal TV viewing. 2 3
• This OSD is only for illustration and the menu Viaccess Module options and screen format will vary according to Consultations the Digital pay services provider. Authorizations Module information • It’s possible for you to change CI (Common Interface) menu screen and service by your dealer.
Select the item 4 5
48 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
RATIO PICTURE I/II SOUND
TEXT BACK INFO i MENU EXIT MENU AUTO PROGRAMME TUNING EXIT GUIDE
OK (IN ANALOGUE MODE) OK
All stations that can be received are stored by this method.
It is recommended that you use Auto tuning during installa- FAV tion of this set. VOL PR VOL Q.VIEW PR MUTE MUTE
123 1 2 3 456 456
789 789
LIST 0 FAV LIST 0 Q.VIEW
Press the MENU button and then D E button to SIZE UPDATE INDEX HOLD 1 or i POSITION INDEX TIME WATCHINGPROGRAMME/ CONTROLTV select the SETUP menu. TIME REVEAL ? ? SLEEP HOLD REVEAL 2 Press the G button and then D or E button to select Auto Tuning.
SETUPO Auto Tuning 3 Press the G button to select System. Select a TV PICTUREO Manual Tuning system with the F or G button; AUDIOO Programme Edit TIMEO L : SECAM L/L’ (France) OPTIONO BG : PAL B/G, SECAM B/G (Europe / East Europe / SCREENO Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Move MENU Prev. Africa / CIS) 1 4 Press the E button to select Storage From.
Select the beginning programme number with the F Auto Tuning G System BG G Storage or button or NUMBER buttons on the Manual Tuning Storage From 2 Programme Edit From menu. Start 5 Press the E button to select Start. The station name is stored for stations which broad- cast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data.
If no station name can be assigned to a station, the 2 3 4 5 channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number.
To stop auto tuning, press the MENU button.
When auto tuning is completed, the Programme Edit menu appears on the screen.
See the ‘Programme Edit’ section to edit the stored programme.
49 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
RATIO PICTURE I/II SOUND
TEXT BACK INFO i MENU EXIT MENU MANUAL PROGRAMME TUNING EXIT GUIDE
OK (IN ANALOGUE MODE) OK
Manual Tuning lets you manually tune and arrange the sta- tions in whatever order you desire. FAV VOL PR VOL Q.VIEW PR MUTE MUTE
123 1 2 3 456 456
789 789
LIST 0 FAV LIST 0 Q.VIEW Press the MENU button and then D E button to 1 or SIZE UPDATE INDEX HOLD WATCHINGPROGRAMME/ CONTROLTV select the SETUP menu. i POSITION INDEX TIME ? TIME REVEAL 2 Press the G button and then D or E button to select Manual Tuning SETUPO Auto Tuning . PICTUREO Manual Tuning AUDIOO Programme Edit G 3 Press the button to select Storage. TIMEO OPTIONO Select the desired programme number with the F or G SCREENO button or NUMBER buttons on the Storage menu. 4 Press the E button to select System. Select a TV system with the F or G button; Move MENU Prev. L : SECAM L/L’ (France) 1 BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) Auto Tuning Storage 1 Manual Tuning G System BG DK : PAL D/K, SECAM D/K (East Europe / China / Programme Edit Band V/UHF Africa / CIS) Channel 1 Fine E F G 5 Press the button to select Band. Press the or Search button to select V/UHF or Cable as required. Name C 01 6 Press the E button to select Channel. You can select the desired channel number with the F or G button or NUMBER buttons. 2 3 4 5 If possible, select the channel number directly with 6 7 8 9 the NUMBER buttons.
7 Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. 8 Press the OK button to store it. 9 To store another station, repeat steps 3 to 8. 10 Press the EXIT button to return to normal TV viewing.
50 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE FINE TUNING I/II SOUND BACK INFO i MENU TEXT (IN ANALOGUE MODE) MENU EXIT EXIT GUIDE Normally fine tuning is only necessary if reception is poor. OK OK
FAV VOL PR 1 Press the MENU button and then D or E button to SETUP VOL Q.VIEW PR select the menu. MUTE MUTE 123 2 Press the G button and then D or E button to select Manual Tuning.
3 Press the G button and then D or E button to select SETUPO Auto Tuning Fine. PICTUREO Manual Tuning AUDIOO Programme Edit WATCHINGPROGRAMME/ CONTROLTV TIMEO Press the G button and then F G button to fine 4 or OPTIONO tune for the best picture and sound. SCREENO 5 Press the OK button to store it. Press the EXIT button to return to normal TV viewing. 6 Move MENU Prev. 1
ASSIGNING A STATION NAME Auto Tuning Storage 1 Manual Tuning System BG Programme Edit Band V/UHF (IN ANALOGUE MODE) Channel 1 Fine FG You can assign a station name with five characters to each Search Name programme number. C 01
Store 1 Press the MENU button and then D or E button to select the SETUP menu. 2 3 4 5
2 Press the G button and then D or E button to select Manual Tuning. Auto Tuning Storage 1 Manual Tuning System BG G D E Programme Edit 3 Press the button and then or button to select Band V/UHF Name. Channel 1 Fine 4 Press the G button and then D or E button. You can Search use a the alphabet A to Z, the number 0 to 9, +/ -, Name FGD C 01 and blank. E
5 Press the F or G button to select the position and make your choice of the second character, and so on. 2 3 4 5 6 6 Press the OK button to store it. 7 Press the EXIT button to return to normal TV viewing.
51 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND PROGRAMME EDIT BACK INFO i MENU TEXT (IN ANALOGUE MODE) MENU EXIT EXIT GUIDE
OK OK This function enables you to delete or skip the stored pro- grammes. Also you can move some stations to other pro- gramme numbers or copy a blank station data into the FAV selected programme number. VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning
WATCHINGPROGRAMME/ CONTROLTV 1 Programme Edit select the SETUP menu. AUDIOO TIMEO OPTIONO 2 Press the G button and then D or E button to select SCREENO Programme Edit.
3 Press the G button to display the Programme Edit menu. Move MENU Prev. 1 A Deleting a programme
a Select a programme to be deleted with the D or E or Auto Tuning F or G button. Manual Tuning Programme Edit G To Set b Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.
A Copying a programme 2 a Select a programme to be copied with the D or E or F or G button.
b Press the GREEN button. All the following programmes are shifted down one position.
52 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK FAV VOL Q.VIEW PR VOL PR RATIO PICTURE I/II SOUND MUTE BACK INFO i MENU MUTE TEXT EXIT GUIDE MENU EXIT 1 2 3 123
456 OK 456 OK 789 789 LIST 0 FAV LIST 0 Q.VIEW
SIZE UPDATE INDEX HOLD FAV i VOL PR POSITION INDEX TIME TIME REVEAL ? ? VOL Q.VIEW PR MUTE SLEEP HOLD REVEAL MUTE 123 SUBTITLE
A Moving a programme WATCHINGPROGRAMME/ CONTROLTV
a Select a programme to be moved with D or E or F or G button. b Press the YELLOW button.
c Move the programme to the desired programme number with the D or E or F or G button.
d Press the YELLOW button again to release this function.
A Skipping a programme number
a Select a programme number to be skipped with D or E or F or G button.
b Press the BLUE button. The skipped programme number turns to blue.
c Press the BLUE button to release the skipped programme.
d When a programme number is skipped it means that you will be unable to select it using the PR D or E (or PR + or -) button during normal TV viewing.
If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
A Selecting Favourite Programme
a Select your favourite programme number with D or E or F or G button.
b Press the FAV button.
The selected programme will be added to the favourite programme list.
53 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
BACK INFO i MENU TEXT EXIT MENU EXIT GUIDE
CALLING THE PROGRAMME OK OK TABLE
You can check the programmes stored in the memory by FAV VOL PR displaying the programme table. VOL Q.VIEW PR
MUTE MUTE
123 1 2 3 456 456 789 789 LIST 0 Q.VIEW LIST 0 FAV
SIZE UPDATE INDEX HOLD POSITION INDEX TIME i A Displaying programme LIST WATCHINGPROGRAMME/ CONTROLTV
DTV List 1 Press the LIST button to display the PROGRAMME D LIST menu. 1 YLE TV1 2 YLE TV2 The programme list appears on the screen. 3 YLE FST 4 YLE 24
• You may find some blue programmes. 5 YLE Teema
They have been set up to be skipped by auto 6TV4
programming or in the programme edit mode. 7 TV4 Film • Some programmes with the channel number shown 8 TV4 400 in the programme LIST indicate there is no station 9 TV4 Plus name assigned. 10 CNN E
A Selecting a programme in the programme list < In Digital Mode >
Programme List D E 1 Select a programme with the or button. 0 BBC1 1C 01 2 Press the OK button. The set switches to the chosen pro- gramme number. 2C 04 3C 43
4 C 05 A Paging through a programme list 5BLN 2 6 S 04
7 S 05 There are programme LIST pages which total contain 8 S 07 100 programmes (Analogue Mode). 9 S 12 1 Press the D or E button repeatedly to turns the pages. < In Analogue Mode > 2 Press the LIST button to return to normal TV viewing.
A Displaying favourite programme table Mini Glossary
Displayed when the Press the FAV button to display the Favourite Favourite Programme. Programme table menu. Displayed when the Locked Programme.
54 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND INPUT SOURCE SELECTION BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE Sets a label to each input source which is not in use.
OK OK
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Language PICTUREO Country
1 Press the MENU button and then use D or E button AUDIOO Lock System WATCHINGPROGRAMME/ CONTROLTV Parental Control TIMEO to select the OPTION menu. Input Label OPTIONO SIMPLINK SCREENO Factory Mode
2 Press the G button and then use D or E button to
select Input Label. Move MENU Prev. 1
3 Press the G button and then use D or E button to select the source: AV1, AV2, Comp., RGB, HDMI1, HDMI2 or HDMI3(Only 37/42LF7 , 42LY99). Language AV1 * Country AV2 Lock System AV3 Parental Control Input Label G Comp. SIMPLINK RGB 4 Press the F or G button to select the label. Factory Mode HDMI1 HDMI2 HDMI3
Press EXIT button to return to normal TV viewing. 5 Only 37/42LF7 , 42LY99 * 2 3 4
55 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
WATCHING TV /PROGRAMME CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
This operates only for the devices with the SIMPLINK OK OK logo. Please check the SIMPLINK logo.
FAV This allows you to control and play other AV devices con- VOL PR nected to the display through HDMI cable without addi- VOL Q.VIEW PR tional cables and settings. MUTE MUTE 123
If you do not want SIMPLINK menu, select “Off”.
In 37/42LF7*, 42LY99 model, SIMPLINK function is not WATCHINGPROGRAMME/ CONTROLTV supported by HDMI IN 3 input.
SETUPO Language PICTUREO Country D E Lock System 1 Press the MENU button and then or button to AUDIOO Parental Control TIMEO select the OPTION menu. Input Label OPTIONO SIMPLINK SCREENO Factory Mode
2 Press the G button and then D or E button to select SIMPLINK.
Move MENU Prev. 1 3 Press the G button and then D or E button to select Off or On.
Language Country 4 Press the EXIT button to return to normal TV viewing. Lock System Parental Control Input Label SIMPLINK G Off Factory Mode On
2 3
56 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, , , , , , and buttons. Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. WATCHINGPROGRAMME/ CONTROLTV * A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function.
SIMPLINK Menu
Press the D or E or F or G button and then OK button to select the desired SIMPLINK source.
1 TV viewing : Switch to the previous TV programme regardless of the current mode.
2 DISC playback : Select and play connected discs. 1 When multiple discs are available, the titles of discs are 2 Selected Device conveniently displayed at the bottom of the screen.
3 VCR playback : Play and control the connected 3 When no device is connect- VCR. ed (displayed in gray) 4 4 HDD Recordings playback : Play and control recordings stored in HDD. 5 When a device is connected (displayed in bright colour) 5 Audio Out to Home theatre/Audio Out to TV: Select Home theatre or TV speaker for Audio Out.
! NOTE G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theater with SIMPLINK function in the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable. G When operating the external device with SIMPLINK, press the TV button among the MODE button on the remote controller. G When you switch the Input source with the INPUT button on the remote controller, you can stop the operation of device controlled by SIMPLINK. G When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).
57 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcasted by broadcasting companies.
The EPG displays the programme description for next 8 days. PICTURE CONTROLPICTURE Switch on/off EPG
1 Press the GUIDE button to switch on EPG. 2 Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.
Select a programme
1 Press the D or E, F or G, PR D or E (or PR + or -) button to select desired programme, then press the OK button to display the selected programme.
58 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Button Function in NOW/NEXT Guide Mode
Remote Control Buttons Function RED Change EPG mode YELLOW Enter Timer Record/Remind setting mode BLUE Enter Timer Record/Remind list mode Change to the selected channel F or G Select NOW or NEXT Programme D or E Select the Broadcasting Programme PR Page Up/Down GUIDE/EXIT Switch off EPG TV/RADIO Select TV or RADIO Programme INFO i The detail information on or off
Button Function in 8 Days Guide Mode PICTURE CONTROLPICTURE Remote Control Buttons Function RED Change EPG mode GREEN Enter Date setting mode YELLOW Enter Timer Record/Remind setting mode BLUE Enter Timer Record/Remind list mode Change to the selected channel F or G Select NOW or NEXT Programme D or E Select the Broadcasting Programme PR Page Up/Down GUIDE/EXIT Switch off EPG TV/RADIO Select TV or RADIO Programme INFO i The detail information on or off
Button Function in Date Change Mode
Remote Control Buttons Function GREEN Switch off Date setting mode Change to the selected date F or G Select a date E Switch off Date setting mode GUIDE/EXIT Switch off EPG
59 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
Button Function in Extended Description Box
Remote Control Buttons Function D or E Text Up/Down YELLOW Enter Timer Record/Remind setting mode INFO i The detail information on or off GUIDE/EXIT Switch off EPG
PICTURE CONTROLPICTURE Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
Remote Control Buttons Function YELLOW Change to Guide or Timer list mode Save Timer Record/Remind F or G Select Type, Service, Date or Start/End time D or E Function setting
Button Function in Timer List Mode
Remote Control Buttons Function YELLOW Add new Manual Timer setting mode GREEN Enter Timer list editing mode RED Delete the selected item BLUE Change to Guide mode D or E Select Timer list
60 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE PICTURE SIZE (ASPECT RATIO) I/II SOUND BACK INFO i MENU TEXT CONTROL MENU EXIT EXIT GUIDE
OK OK You can watch the screen in various picture formats; Spectacle(Except 37/42LF7*, 42LY99), Full(Except 42LY99), Original, 4:3, 16:9, 14:9, Zoom1/2 and FAV 1:1 Pixel (or Just Scan(Only 37/42LF7*, 42LY99)). VOL PR VOL Q.VIEW PR MUTE MUTE If a fixed image is displayed on the screen for a long time, 123 that fixed image may become imprinted on the screen and remain visible.
There might be uncomfortable in full mode. Then change into other mode.
You can adjust the enlarge proportion using D or E button. CONTROLPICTURE
This function works in the following signal.
1 Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the SCREEN menu.
• Spectacle (Except 37/42LF7*, 42LY99) • Original When your TV receives the wide screen signal, When your TV receives the wide screen signal, it will be when selected it will adjust the picture horizontally, automatically changed to the picture format to be sent. in non-linear proportion, to fill the entire screen.
Original Spectacle DE
• Full (Except 42LY99) • 4:3 When your TV receives the wide screen signal, when Following selection will lead you to view a picture selected it will adjust the picture horizontally or vertical- with an original 4:3 aspect ratio, with gray bars ly, in a linear proportion, to fill the entire screen fully. appearing at both the left and right sides.
Full DE 4:3
61 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
• 16:9 • Zoom2 Following selection will lead you to adjust the picture Choose Zoom2 when you want the picture to horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage.
16:9
Zoom2 DE • 14:9 You can enjoy the picture format of 14:9 or gener- PICTURE CONTROLPICTURE al TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 • 1:1 Pixel (or Just Scan(Only 37/42LF7*, is magnified to the left / right. 42LY99)) Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image.
14:9 DE
• Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bot- tom portions of the picture will be cropped.
Zoom1 DE
! NOTE G You can only select 4:3, 16:9 (Wide), Zoom 1/2 in Component, HDMI mode. G You can only select 4:3, 16:9 (Wide) in RGB mode only. G In HDMI (1080i 50Hz/60Hz, 1080p 24Hz/50Hz/60Hz) mode, 1:1 Pixel(or Just Scan(Only 37/42LF7*, 42LY99)) is available.
62 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND PRESET PICTURE SETTINGS BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
Picture Mode-Preset OK OK
Dynamic Select this option to display with a sharp
image. FAV VOL PR Standard The most general and natural screen dis- VOL Q.VIEW PR play status. MUTE MUTE Mild Select this option to display with a mild 123 image. User 1/2 Select this option to use the user-defined setting.
SETUPO Picture Mode Colour Temperature Press the MENU button and then D or E button to PICTUREO CONTROLPICTURE 1 AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo 2 Press the G button and then D or E button to select SCREENO Picture Mode.
G D E 3 Press the button and then or button to select Move MENU Prev. Intelligent Eye (except 50/60PF9*), Dynamic, Standard, Mild, User 1, or User 2. 1
4 Press the EXIT button to return to normal TV viewing. Picture Mode G Intelligent Eye Picture Mode adjusts the set for the best picture Colour Temperature Dynamic Standard appearance. Select the preset value in the Picture Advanced Mild Mode menu based on the programme category. Picture Reset User 1 Demo User 2
Intelligent Eye (except 50/60PF9*), Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed. 2 3
63 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE Auto Colour Tone Control I/II SOUND BACK INFO i MENU TEXT (Warm/Medium/Cool) MENU EXIT EXIT GUIDE
To initialize values (reset to default settings), select the OK OK Cool option.
Choose one of three automatic colour adjustments. Set to FAV warm to enhance hotter colours such as red, or set to cool VOL PR VOL Q.VIEW PR to see less intense colours with more blue. MUTE MUTE 123 It’s available to use this function in User mode.
SETUPO Picture Mode D E PICTUREO Colour Temperature PICTURE CONTROLPICTURE 1 Press the MENU button and then or button to AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo SCREENO 2 Press the G button and then D or E button to select Colour Temperature.
Move MENU Prev.
3 Press the G button and then D or E button to select 1 either Cool, Medium, Warm, or User.
Picture Mode Colour Temperature G Cool 4 Press the EXIT button to return to normal TV viewing. Medium Advanced Warm Picture Reset User Demo
2 3
64 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE MANUAL PICTURE ADJUSTMENT I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
Picture Mode-User option OK OK
Contrast Adjusts the difference between the light
and dark levels in the picture. FAV Brightness Increases or decreases amount of white VOL PR VOL Q.VIEW PR in the your picture. MUTE MUTE Colour Adjusts intensity of all colours. 123 Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer SETUPO Picture Mode PICTUREO Colour Temperature the image. AUDIOO Advanced TIMEO Tint Adjusts the balance between red and Picture Reset OPTIONO Demo green levels. SCREENO PICTURE CONTROLPICTURE
Move MENU Prev. 1 Press the MENU button and then D or E button to 1 select the PICTURE menu.
G D E 2 Press the button and then or button to select Picture Mode G Intelligent Eye Picture Mode. Colour Temperature Dynamic Standard Advanced Mild Picture Reset User 1 3 Press the G button and then D or E button to select Demo User 2 User 1 or User 2.
4 Press the G button and then D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint). 2 3
5 Press the F or G button to make appropriate adjust- ments. User 1
Contrast 100 G Brightness 45 Press the EXIT button to return to normal TV viewing. Colour 50 6 Sharpness 50 Tint 0 RG
4 5 ! NOTE
G You can’t adjust colour, sharpness and tint in the RGB- PC mode to the levels you prefer.
65 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE Colour Tone - User option OK OK
To adjust red, green, blue to any colour temperature you prefer. FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D E button to 1 or AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO
PICTURE CONTROLPICTURE Demo SCREENO
2 Press the G button and then D or E button to select Colour Temperature. Move MENU Prev. 1 3 Press the G button and then D or E button to select User. Picture Mode Colour Temperature G Cool Medium Advanced Warm 4 Press the G button and then D or E button to select Picture Reset User Red, Green or Blue. Demo
5 Press the F or G button to make appropriate adjust- ments. 2 3
Press the EXIT button to return to normal TV viewing. 6 User
Red 40 G Green 0 Blue 0
4 5
66 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE XD - PICTURE IMPROVEMENT I/II SOUND BACK INFO i MENU TEXT TECHNOLOGY MENU EXIT EXIT GUIDE
OK OK XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. FAV VOL PR
It’s not available to use this function in PC[RGB/HDMI] VOL Q.VIEW PR MUTE MUTE mode. 123
Press the MENU button and then D E button to SETUPO Picture Mode 1 or PICTUREO Colour Temperature select the PICTURE menu. AUDIOO Advanced TIMEO Picture Reset OPTIONO Demo G D E 2 Press the button and then or button to select SCREENO
XD. CONTROLPICTURE
Press the G button and then D E button to select 3 or Move MENU Prev. Auto or Manual. 1 4 Press the EXIT button to return to normal TV viewing.
Picture Mode Auto * Selecting the Manual Colour Temperature Manual G XD Contrast Advanced On Picture Reset This menu is activated after selecting the User1 or User2 of Demo XD Colour Picture Mode. On XD NR Low 1 Press the G button and then D or E button to select MPEG NR 0 XD Contrast, XD Colour, XD NR or MPEG NR. 2 2 Press the G button and then D or E button to select On or Off.
Picture Mode Auto Colour Temperature Press the EXIT button to return to normal TV viewing. Manual G 3 XD Contrast Advanced On Picture Reset A XD Contrast : Demo XD Colour Optimizing the contrast automati- On cally according to the brightness of the reflection. XD NR A XD Colour : Adjusting the colors of the reflec- Low tion automatically to reproduce as closely as possi- MPEG NR 0 ble to the natural colors. A XD NR : Removing the noise up to the point 3 where it does not damage the original picture. A MPEG NR : To reduce the picture noise which may appear on the screen during watching the TV.
67 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND DEMO BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE Use it to see the difference between XD Demo on and XD Demo off. OK OK It’s not available to use this function in RGB[PC], HDMI[PC] mode.
FAV
SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D or E button to 1 AUDIOO select the PICTURE menu. Advanced TIMEO Picture Reset OPTIONO Demo 2 Press the MENU button and then D or E button to SCREENO select XD Demo.
3 Press the G button to begin XD Demo. Move MENU Prev. 4 To stop XD Demo, press the MENU or EXIT button. 1 PICTURE CONTROLPICTURE Picture Mode Colour Temperature
Advanced Picture Reset Demo G To Start TRUMOTION DEMO ( Only 42LY99) Use it to see the difference between TruMotion Demo on and TruMotion Demo off. It’s not available to use this function in RGB[PC], 2 3 HDMI[PC] mode. * Only 42LY99
1 Press the MENU button and then D or E button to Picture Mode select the PICTURE menu. Colour Temperature Advanced Press the MENU button and then D E button to Picture Reset 2 or Demo select TruMotion Demo. TruMotion Demo G To Start 3 Press the G button to begin TruMotion Demo. 4 To stop TruMotion Demo, press the MENU or EXIT button. 2 3
• XD Demo • TruMotion Demo
XD™ Off XD™ On
MENU Exit TruMotion On TruMotion Off
68 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE ADVANCED - CINEMA I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE Set up the TV for the best picture appearance for viewing movies. OK OK This feature operates only in TV, AV, S-Video and Component 480i/576i, DTV mode. FAV VOL PR
SETUPO Picture Mode PICTUREO Colour Temperature D E 1 Press the MENU button and then or button to AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo 2 Press the G button and then D or E button to select SCREENO Advanced.
3 Press the G button and then D or E button to select Cinema. Move MENU Prev. PICTURE CONTROLPICTURE 1 4 Press the F or G button to select On or Off.
Picture Mode 5 Press the EXIT button to return to normal TV viewing. Colour Temperature
Advanced G Cinema Picture Reset Off Demo Black Level ADVANCED - TRUMOTION ( Only 42LY99) Low It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC,HDMI-PC mode. 2
Picture Mode Colour Temperature 1 Press the MENU button and then D or E button to select the PICTURE menu. Advanced Cinema Picture Reset F G On Demo 2 Press the G button and then D or E button to select Black Level Advanced. Low
3 Press the G button and then D or E button to select TruMotion. 3 4 Press the F or G button to select Off, Low or High. * Only 42LY99 Picture Mode A Low Colour Temperature Set amount of film judder to low. Advanced Cinema A High Picture Reset On Demo Set amount of film judder to high. Black Level TruMotion Demo Low * If you have some problem in viewing picture, set TruMotion TruMotion to Lowor Off. F GHigh
5 Press the EXIT button to return to normal TV viewing. 3 69 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE ADVANCED - BLACK(DARKNESS) I/II SOUND BACK INFO i MENU TEXT LEVEL MENU EXIT EXIT GUIDE When you watch the movie, this function adjusts the set OK OK to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. FAV VOL PR
VOL Q.VIEW PR This function works in the following mode: AV (NTSC-M), MUTE MUTE S-Video (NTSC-M) or HDMI. 123
SETUPO Picture Mode PICTUREO Colour Temperature D E Press the MENU button and then or button to AUDIOO 1 Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo SCREENO PICTURE CONTROLPICTURE 2 Press the G button and then D or E button to select Advanced. Move MENU Prev. 1 3 Press the G button and then D or E button to select Black Level. Picture Mode Colour Temperature
Advanced G Cinema F G 4 Press the or button to select Low or High. Picture Reset Off Demo Black Level Low A Low : The reflection of the screen gets darker. A High : The reflection of the screen gets brighter.
2 5 Press the EXIT button to return to normal TV viewing.
Picture Mode Colour Temperature
Advanced Cinema Picture Reset Off Demo Black Level F G Low
3 4
70 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE PICTURE RESET I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. OK OK
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Picture Mode PICTUREO Colour Temperature D E 1 Press the MENU button and then or button to AUDIOO Advanced PICTURE TIMEO select the menu. Picture Reset OPTIONO Demo SCREENO PICTURE CONTROLPICTURE 2 Press the G button and then D or E button to select Picture Reset. Move MENU Prev. 1 3 Press the G button to initialize the adjusted value.
Picture Mode Colour Temperature
Advanced Picture Reset G To Set Demo
2 3
71 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PICTURE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND IMAGE STICKING MINIMIZATION BACK INFO i MENU TEXT (ISM) METHOD MENU EXIT EXIT GUIDE
OK OK A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid FAV allowing a fixed image to remain on the set's screen for a VOL PR
long period of time. VOL Q.VIEW PR MUTE MUTE 123 It’s not available to use this function in LCD models.
White wash SETUPO Language PICTUREO Country White wash removes permanent images from the AUDIOO Lock System Parental Control TIMEO screen. Input Label Note: An excessive permanent image may be impossible OPTIONO SIMPLINK SCREENO Factory Mode
PICTURE CONTROLPICTURE to clear entirely with White Wash.
Orbiter Move MENU Prev. Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the 1 screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Language Set ID Country 1 Lock System Inversion Factory Reset Parental Control This is the function to invert the panel colour of the Input Label OK screen. The panel colour is automatically inverted every SIMPLINK ISM Method Factory Mode G Normal 30 minutes. Low Power Off
1 Press the MENU button and then D or E button to select the OPTION menu. 2
2 Press the G button and then D or E button to select Factory Mode. Language Set ID Country 1 Lock System Factory Reset Press the G button and then D or E button to select Parental Control 3 Input Label OK ISM Method. SIMPLINK ISM Method Factory Mode F G Normal Press the F or G button to select either Normal, Low Power 4 Off White wash, Orbiter or Inversion. If you unnecessary to set this function, set Normal.
5 Press the EXIT button to return to normal TV viewing. 3 4
72 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND LOW-POWER PICTURE MODE BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE This is the function to reduce the power consumption of
the set. OK OK
It’s not available to use this function in LCD TV models.
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Language PICTUREO Country D E Lock System 1 Press the MENU button and then or button to AUDIOO Parental Control TIMEO select the OPTION menu. Input Label OPTIONO SIMPLINK SCREENO Factory Mode Press the G button and then D or E button to select 2 CONTROLPICTURE Factory Mode.
3 Press the G button and then D or E button to select Move MENU Prev. Low power. 1 4 Press the F or G button to select On or Off.
Press the EXIT button to return to normal TV viewing. Language Set ID 5 Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode G Normal Low Power Off
2
Language Set ID Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode Normal Low Power F G On
3 4
73 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND & LANGUAGE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND AUTO VOLUME LEVELER BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
OK OK AVL automatically keeps on an equal volume level even if you change programmes.
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Sound Mode Auto Volume Press the MENU button and then D E button to PICTUREO 1 or AUDIOO Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO Auto Volume.
G D E 3 Press the button and then or button to select Move MENU Prev.
SOUND & LANGUAGE& CONTROLSOUND Off or On. 1 4 Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume G Off Balance 0 On TV Speaker Digital Audio Out
2 3
74 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE PRESET SOUND SETTINGS- I/II SOUND BACK INFO i MENU TEXT SOUND MODE MENU EXIT EXIT GUIDE You can select your preferred sound setting; Surround OK OK MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. FAV VOL PR
Sound Mode lets you enjoy the best sound without any VOL Q.VIEW PR Special adjustment because the TV sets the appropriate MUTE MUTE 123 sound options based on the programme content.
Surround MAX, Standard, Music, Movie, and Sports SETUPO Sound Mode are preset for good sound quality at the factory and are PICTUREO Auto Volume AUDIOO Balance 0 not adjustable. TV Speaker TIMEO Digital Audio Out OPTIONO Surround MAX Select this option to sound realistic. SCREENO Standard The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music. Move MENU Prev. SOUND & LANGUAGE& CONTROLSOUND Movie Select this option to enjoy sublime sound. 1 Sports Select this option to watch sports broadcast- ing.
User Select this option to use the user-defined audio Sound Mode G Surround MAX Auto Volume Standard settings. Balance 0 Music TV Speaker Movie Digital Audio Out Sports User
1 Press the MENU button and then D or E button to select the AUDIO menu.
2 3 2 Press the G button and then D or E button to select Sound Mode.
3 Press the G button and then D or E button to select Surround MAX, Standard, Music, Movie, Sports or User.
4 Press the EXIT button to return to normal TV viewing.
75 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND &LANGUAGE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE SOUND SETTING ADJUSTMENT I/II SOUND BACK INFO i MENU TEXT -USER MODE MENU EXIT EXIT GUIDE
OK OK Adjust the sound equalizer.
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
1 Press the MENU button and then D or E button to select the AUDIO menu. SETUPO Sound Mode PICTUREO Auto Volume AUDIOO Balance 0 TV Speaker TIMEO Digital Audio Out OPTIONO G D E 2 Press the button and then or button to select SCREENO Sound Mode.
Move MENU Prev. SOUND & LANGUAGE& CONTROLSOUND 3 Press the G button and then D or E button to select User. 1
Sound Mode G Surround MAX 4 Press the G button. Auto Volume Standard Balance 0 Music TV Speaker Movie Digital Audio Out Sports User 5 Select a sound band by pressing the F or G button. Make appropriate sound level with the D or E but- ton.
2 3 6 Press the EXIT button to return to normal TV viewing.
User
120Hz FG 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz
4 5
76 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND BALANCE BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE You can adjust the sound balance of speaker to the levels you prefer. OK OK
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Sound Mode Auto Volume Press the MENU button and then D E button to PICTUREO 1 or AUDIOO Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO Balance.
G F G 3 Press the button and then or button to make Move MENU Prev.
desired adjustment. LANGUAGE& CONTROLSOUND 1 4 Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance 0 G LR TV Speaker Digital Audio Out
2 3
77 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND &LANGUAGE CONTROL
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND TV SPEAKERS ON/ OFF SETUP BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
OK OK You can adjust the internal speaker status.
In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 FAV with HDMI to DVI cable, TV speaker can be outputted even VOL PR
though there is no video signal. VOL Q.VIEW PR MUTE MUTE If you want to use your external hi-fi stereo system, turn off 123 the internal speakers of the set.
SETUPO Sound Mode Press the MENU button and then D or E button to PICTUREO Auto Volume 1 AUDIOO Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO TV Speaker. SOUND & LANGUAGE& CONTROLSOUND
G D E 3 Press the button and then or button to select Move MENU Prev. Off or On. 1 4 Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance 0 TV Speaker G Off Digital Audio Out On
2 3
78 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE SELECTING DIGITAL I/II SOUND BACK INFO i MENU TEXT AUDIO OUT MENU EXIT EXIT GUIDE
OK OK This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. FAV When it’s applied the Dolby Digital format, if you select Dolby VOL PR
Digital on Digital audio out menu, SPDIF Output will be out- VOL Q.VIEW PR putted Dolby Digital. MUTE MUTE Even if it’s selected Dolby Digital, when it doesn’t apply 123 Dolby Digital format, SPDIF Output will be outputted PCM. Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. This function is not displayed in the Analog mode.
Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
SETUPO Sound Mode SOUND & LANGUAGE& CONTROLSOUND Press the MENU button and then D or E button to PICTUREO Auto Volume 1 AUDIOO Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO Digital Audio Out.
G D E 3 Press the button and then or button to select Move MENU Prev. Dolby Digital or PCM. 1 4 Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out G Dolby Digital PCM
2 3
79 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND &LANGUAGE CONTROL
I/II
Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I
A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing
SOUND & LANGUAGE& CONTROLSOUND the I/II button twice. In mono reception, the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
A Language selection for dual language broadcast If a programme received two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I Sends the primary broadcast language to the loudspeakers. DUAL II Sends the secondary broadcast language to the loudspeakers. DUAL I+II Sends a separate language to each loudspeaker.
80 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
NICAM Reception (In Analogue Mode Only)
If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by press- ing the I/II button repeatedly.
1 When NICAM mono is received, you can select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. SOUND & LANGUAGE& CONTROLSOUND
3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO.
Speaker Sound Output Selection
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.
81 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
SOUND &LANGUAGE CONTROL
S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE ON-SCREEN MENU LANGUAGE / I/II SOUND
TEXT COUNTRY SELECTION MENU EXIT
Installation guide menu appears on TV screen when it is turned OK on for the first time.
D E F G 1 Press the or or or button and then, O K VOL PR button to select your desired language.
2 Press the D or E button and then, OK button to select your country. BACK INFO i MENU EXIT GUIDE
* If you want to change Language/ Country selection
SOUND & LANGUAGE& CONTROLSOUND OK
1 Press the MENU button and then use D or E button to select the OPTION menu. FAV VOL PR 2 Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country.
3 Press the G button and then use F or G button to select your desired language or country.
4 Press the OK button.
5 Press the EXIT button to return to normal TV viewing.
! NOTE G If you don’t finish set up Installation Guide by pressing EXIT button or time out of OSD (On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on. G If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. G CI (Common Interface) function may not be applied based on country broadcasting circumstance. G DTV mode control buttons may not be working based on country broadcasting circumstance.
82 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
DVD TV VCR
INFO i S GUIDE UBTITLE TV/RADIO LANGUAGE SELECTION SLEEP BACK
RATIO PICTURE (IN DIGITAL MODE ONLY) I/II SOUND
TEXT Audio function lets you select your preferred language for audio. If MENU EXIT the audio data in selected language is not broadcasted, default lan- guage audio will be played. OK
Use Subtitle function when two or more subtitle languages are broadcasted. If the subtitle data in selected language is not broad- casted, default language subtitle will be displayed.
SIMPLINK TEXT RATIO I/II
1 Press the MENU button and then use D or E button to select the OPTION menu.
G BACK INFO i 2 Press the button and then use D or E button to select MENU Language. EXIT GUIDE SOUND & LANGUAGE& CONTROLSOUND 3 Press the G button and then use D or E button to select OK Audio, Subtitle or Subtitle Hard of hearing.
Press the G button and then use F or G button to select 4 ? your desired language. SLEEP HOLD REVEAL
SUBTITLE 5 Press the EXIT button to return to normal TV viewing.
! NOTE < Audio Language Selection > Audio Language OSD Information G When two or more audio languages are broadcasted, you Display Status can select audio language with the I/II button on the N.A Not Available remote control. MPEG Audio G Press the D or E button to select an audio language. Dolby Digital Audio G Press the F or G button to select L+R, L+L or R+R. Audio for “Visual Impaired” Audio for “Hearing Impaired”
< Subtitle Language Selection > Subtitle Language OSD Information G When two or more subtitle languages are broadcasted, you Display Status can select subtitle language with the SUBTITLE button on N.A Not Available the remote control. TEXT Teletext Subtitle G Press the D or E button to select a subtitle language. Subtitle for “Hard of Hearing”
- The audio/subtitle can be displayed simpler form with 1 to 3 characters which is broadcast by service provider. - When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) it may speak out a part of Main audio.
83 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
TIME SETTING
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND CLOCK SETUP BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
OK OK The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time FAV function. VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIMEO Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Clock.
G F G 3 Press the button and then or button to select Move MENU Prev. either the year, date, or time option. 1 Once selected, use the D or E button to set the year, date, and time options. TIME SETTING TIME
Clock G Time 20 14 Press the EXIT button to return to normal TV viewing. Off Time Date 12 Apr 4 On Time Year 2007 Auto Sleep Time Zone
2 3
84 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND AUTO ON/OFF TIMER SETTING BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE The Off time automatically switches the set to standby at
the preset time. OK OK Two hours after the set is switched on by the on time func- tion it will automatically switch back to standby mode unless a button has been pressed. FAV Once the on time/off time is set, these functions operate VOL PR
daily at the preset time. VOL Q.VIEW PR Off time function overrides On timer function if they are set MUTE MUTE 123 both to the same time. The set must be in standby mode for the On timer to work.
SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIMEO Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Off time/On Time.
G D E 3 Press the button and then or button to select Move MENU Prev. On. 1 SETTING TIME • To cancel On/Off Time function, select Off.
4 Press the G button and then D or E button to set the Clock hour. Off Time On Time G Off Auto Sleep On 5 Press the G button and then D or E button to set the Time Zone 18 : 00 Volume 3 minutes. Mode TV PR 0 6 For only On time function
• Programme: Press the G button and then D or E but- ton to select TV, DTV or Radio in the Mode menu. 2 3 4 5 6 And then, Press the G button and then D or E button to select the programme.
• Volume: Press the G button and then D or E but- ton to adjust volume level at turn-on.
7 Press the EXIT button to return to normal TV viewing.
85 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
TIME SETTING
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND AUTO SHUT-OFF SETTING BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE If set to on and there is no input signal, the set turns off auto-
matically after 10 minutes. OK OK
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIMEO Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Auto Sleep.
G D E 3 Press the button and then or button to select Move MENU Prev. Off or On. 1 4 Press the EXIT button to return to normal TV viewing. TIME SETTING TIME
Clock Off Time On Time Auto Sleep G Off Time Zone On
2 3
86 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE I/II SOUND TIME ZONE SETUP BACK INFO i MENU TEXT EXIT When you select a Time Zone city, TV time is set by the time MENU EXIT GUIDE offset information based on Time Zone and GMT (Greenwich OK Mean Time) information which is received to broadcasting OK signal when time is set automatically by a digital signal.
FAV VOL PR 1 Press the MENU button and then D or E button to VOL Q.VIEW PR MUTE select the TIME menu. MUTE 123
2 Press the G button and then D or E button to select Time Zone. SETUPO Clock PICTUREO Off Time G F G AUDIOO On Time 3 Press the button and then or button to select Auto Sleep TIMEO your viewing area time zone. Time Zone OPTIONO SCREENO 4 Press the EXIT button to return to normal TV viewing.
Move MENU Prev. 1 TIME SETTING TIME SLEEP TIMER SETTING Clock Off Time On Time You don’t have to remember to switch the set off before you Auto Sleep Time Zone G Time Zone go to sleep. London GMT The sleep timer automatically switches the set to standby after the preset time has elapsed.
a Press the SLEEP button repeatedly to select the num- 2 3 ber of minutes.
The display ‘ - - - Min. ’ will appear on the screen, fol- lowed by 10, 20, 30, 60, 90, 120, 180 and 240. b When the number of minutes you want is displayed on the screen, the timer begins to count down from the number of minutes selected.
c To view the remaining sleep time, press the SLEEP but- ton once. d To cancel the sleep time, repeatedly press the SLEEP button until the display ‘ - - - Min. ’ appears. e When you switch the set off, the set releases the pre- set sleep time.
87 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
PARENTAL CONTROL / RATINGS
I/II SOUND
TEXT BACK INFO i MENU EXIT MENU SET PASSWORD & LOCK EXIT GUIDE OK SYSTEM OK
If you first enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the FAV remote control handset. VOL PR VOL Q.VIEW PR MUTE MUTE
123 1 2 3 456 456
789 789
LIST 0 FAV LIST 0 Q.VIEW
SIZE UPDATE INDEX HOLD
SETUPO Language Press the MENU button and then D or E button to PICTUREO Country 1 AUDIOO Lock System Parental Control select the OPTION menu. TIMEO Input Label OPTIONO SIMPLINK 2 Press the G button and then D or E button to select SCREENO Factory Mode Lock System.
G F G 3 Press the button and then or button to select Move MENU Prev. On. 1 PARENTALCONTROLRATING / To set the password
Press the G button and then use NUMBER buttons to Language input a 4-digit password. Country Lock Off Lock System G Parental Control Set Password Input Label New Be sure to remember this number! SIMPLINK Factory Mode Confirm Re-enter new password for confirm.
If you forgot your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset. 2 3 4 Press the EXIT button to return to normal TV viewing.
88 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
I/II SOUND
INPUT MODE TEXT EXIT MENU D/A POWER TV PARENTAL CONTROL TV/RADIO DVD INPUT BRIGHT OK VCR
BACK INFO i MENU This function operates according to information EXIT GUIDE from the broadcasting station. Therefore if the
signal has wrong information, this function dose VOL Q.VIEW PR OK not operates. MUTE
Lets you set up blocking schemes to block specif- 1 2 3 ic channels, ratings, and external viewing sources. 456 FAV VOL PR 789 A password is required to gain access to this menu. LIST 0 FAV MUTE 123 This set is programmed to remember which option SIZE UPDATE INDEX HOLD it was last set to even if you turn the set off. 456
789
LIST 0 Q.VIEW
1 Press the MENU button and then D or E button to select the OPTION menu. SETUPO Language PICTUREO Country G D E 2 Press the button and then or button to select AUDIOO Lock System Parental Control Parental Control TIMEO . Input Label Then, press the G button to enter the password as OPTIONO SIMPLINK requested. SCREENO Factory Mode The TV is set up with the initial password “0-0-0-0”.
Press the G button and then D or E button to select Move MENU Prev.
3 PARENTALCONTROLRATING / Parental Guidance or Key Lock. 1 Parental Guidance (In Digital mode only) Prevents children from watching certain adult’s TV pro- grammes, according to the ratings limit set. Language Country Key Lock Lock System The set can be set so that the remote control is Parental Control G Parental Guidance Input Label Off needed to control it. This feature can be used to pre- SIMPLINK Key Lock Factory Mode vent unauthorized viewing. Off 4 Press the F or G button to make appropriate adjust- ments.
5 Press the EXIT button to return to normal TV viewing. 2 3 4
In Key Lock ‘On’, if the set is turned off, press the r / I, INPUT, PR D or E button on the set or POWER, INPUT, D/A, PR D or E (or PR + or -) or NUM- BER buttons on the remote control.
With the Key Lock On, the display ‘ Key Lock On ’ appears on the screen if any button on the front panel is pressed while viewing the set.
89 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
TELETEXT This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard tele- text) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. The previous mode reappears. SIMPLE TEXT
A Page selection
1 Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. 2 The PR D or E (or PR + or -) button can be used to select the preceding or following page.
TOP TEXT
TELETEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
A Block / group / page selection
1 With the blue button you can progress from block to block. 2 Use the yellow button to proceed to the next group with automatic overflow to the next block. 3 With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR D (or PR +) button can be used. 4 The red button permits to return to previous selection. Alternatively the PR E (or PR -) button can be used.
A Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.
90 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond- ing coloured button.
A Page selection
1 Press thei button to select the index page. 2 You can select the pages which are colour coded along the bottom line with the same coloured buttons. 3 Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4 The PR D or E (or PR + or -) button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
?
A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display.
A UPDATE Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page. TELETEXT
A TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page num- ber. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, PR D or E (or PR + or -) or NUMBER buttons. Press again to exit this function.
A HOLD Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num- ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again.
91 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
DIGITAL TELETEXT *This function works in UK only.
The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext. You should select off from the subtitle language to display teletext by pressing SUBTITLE button.
TELETEXT WITHIN DIGITAL SERVICE
1 Press the numeric or PR D or E (or PR + or -) button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the EPG service list.
2 Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.
3 To change digital teletext service, just select a different ser- vice by the numeric or PR D or E (or PR + or -) button.
If pressing the MENU, GUIDE or INFO i button, the teletext service disappear temporarily. When pressing these buttons again, the teletext service is appeared.
TELETEXT IN DIGITAL SERVICE
1 Press the numeric or PR D or E (or PR + or -) button to select a certain service which broadcasts digital teletext. APPENDIX 2 Press the TEXT or colour button to switch on teletext. 3 Follow the indications on digital teletext and move onto the next step by pressing OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.
4 Press the TEXT or colour button to switch off digital tele- text and return to TV viewing.
Some services may allow you to access text services by pressing the RED button.
If pressing the MENU, GUIDE or INFO i button, the teletext service disappear temporarily. When pressing these buttons again, the teletext service is appeared.
92 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
A Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. The remote control A Ensure that the batteries are installed with correct polarity (+ to +, - to -). doesn’t work A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
A Is the sleep timer set? Power is suddenly A Check the power control settings. Power interrupted. turned off A No broadcast on station tuned with Auto sleep activated.
The video function does not work.
A Check whether the product is turned on. A Try another channel. The problem may be with the broadcast. A Is the power cord inserted into wall power outlet? No picture &No sound A Check your antenna direction and/or location. A Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.
Picture appears slowly A This is normal, the image is muted during the product startup process. Please after switching on contact your service centre, if the picture has not appeared after five minutes.
A Adjust Colour in menu option. A Keep a sufficient distance between the product and the VCR. No or poor colour A Try another channel. The problem may be with the broadcast. APPENDIX or poor picture A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars A or picture shaking Check for local interference such as an electrical appliance or power tool.
A Station or cable product experiencing problems, tune to another station. Poor reception on A Station signal is weak, reorient antenna to receive weaker station. some channels A Check for sources of possible interference.
Lines or streaks A Check antenna (Change the direction of the antenna). in pictures
93 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
The audio function does not work.
A Press the VOL button. A Picture OK & No sound Sound muted? Press MUTE button. A Try another channel. The problem may be with the broadcast. A Are the audio cables installed properly? No output from one of the speakers A Adjust Balance in menu option.
Unusual sound from A A change in ambient humidity or temperature may result in an unusual noise inside when the product is turned on or off and does not indicate a fault with the the product product.
There is a problem in PC mode. (Only PC mode applied)
A Adjust resolution, horizontal frequency, or vertical frequency. The signal is out of range (Invalid format) A Check the input source.
Vertical bar or stripe on background & A Horizontal Noise & Work the Auto configure or adjust clock, phase, or H/V position. (Option) Incorrect position
Screen colour is unstable A Check the signal cable. or single colour A Reinstall the PC video card. APPENDIX
94 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
2 Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet A To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. A Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. APPENDIX
95 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
PRODUCT SPECIFICATIONS
37LF6* 42LF6* 47LF6* 52LF6* MODELS 37LF65-ZC 42LF65-ZC 47LF65-ZC 52LF65-ZC 37LF66-ZE 42LF66-ZE 47LF66-ZE 52LF66-ZE
Dimensions 927.0 x 692.8 x 280.5 mm 1033.1 x 750.0 x 300.0 mm 1144.5 x 825.6 x 331.0 mm 1032.7 x 750.0 x 287.6 mm with stand (Width x Height x Depth) 36.5 x 27.3 x 11.0 inches 40.7 x 29.6 x 11.9 inches 45.1 x 32.5 x 13.1 inches 40.7x 29.5 x 11.3 inches
without stand 927.0 x 630.0 x 88.0 mm 1033.1 x 686.5 x 88.5 mm 1144.5 x 754.9 x 103.0 mm 1032.7 x 685.5 x 88.5 mm 36.5 x 24.8 x 3.5 inches 40.7 x 27.1 x 3.5 inches 45.1 x 29.8 x 4.1 inches 40.7 x 27.0 x 3.5 inches
Weight with stand 20.0 kg / 44.0 lbs 27.5 kg / 60.7 lbs 37.46 kg / 82.6 lbs 24.5 kg / 54.0 lbs without stand 16.0 kg / 35.3 lbs 23.0 kg / 50.8 lbs 31.4 kg / 69.3 lbs 20 kg / 44.1 lbs
Power requirement AC100-240V~ 50/60Hz 1.8A AC100-240V~ 50/60Hz 2.5A AC100-240V~ 50/60Hz 3.2A AC100-240V~ 50/60Hz 3.5A Power Consumption 180W 240W 310 W 350W
37LY9* 42LY9* 47LY9* 52LY9* MODELS 37LY95-ZA 42LY95-ZA 47LY95-ZA 52LY95-ZA 37LY96-ZB 42LY96-ZB 47LY96-ZB 52LY96-ZB 42LY99-ZC 1005.0 x 653.0 x 267.0 mm 1113.3 x 722.5 x 294.3 mm 1236.8 x 795.5 x 325.6 mm 1033.1 x 749.5 x 287.6 mm Dimensions with stand 39.6 x 25.8 x 10.6 inches 43.9 x 28.5 x 11.6 inches 48.7 x 31.4 x 12.9 inches 40.7x 29.5 x 11.3 inches (Width x Height x Depth)
1005.0 x 594.4 x 88.0 mm 1113.3 x 656.5 x 88.5 mm 1236.8 x 725.4 x 103.0 mm 1033.4 x 686.8 x 88.5mm without stand 39.6 x 23.5 x 3.5 inches 43.9 x 25.9 x 3.5 inches 48.7 x 28.6 x 4.1 inches 40.7 x 27.0x 3.5inches
Weight with stand 23.0 kg / 50.8 lbs 30.5 kg / 67.3 lbs 39.5 kg / 87.1 lbs 24.5 kg / 54.1 lbs without stand 18.8 kg / 41.5 lbs 24.3 kg / 53.6 lbs 33.0 kg / 72.8 lbs 20.4 kg / 45.0 lbs
Power requirement AC100-240V~ 50/60Hz 1.8A AC100-240V~ 50/60Hz 2.6A AC100-240V~ 50/60Hz 3.2A AC100-240V~ 50/60Hz 3.5A Power Consumption 180W 260W 310 W 350W
Television System PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
APPENDIX Program Coverage VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47 External Antenna Impedance 75 Ω
Operating Temperature 0 ~ 40°C / 32 ~ 104°F
Environment condition Operating Humidity Less than 80%
Storage Temperature -20 ~ 60°C / -4 ~ 140°F Storage Humidity Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
96 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
50PF9* 60PF9*
MODELS 50PF95-ZA 60PF95-ZA 50PF95-ZJ 60PF95-ZJ 50PF96-ZB 60PF96-ZB
1360 x 889 x 370 mm 1613.6 x 1036.8 x 452.0 mm Dimensions with stand 53.5 x 35 x 14.5 inches 63.5 x 40.9 x 17.8 inches (Width x Height x Depth) without stand 1360 x 822.5 x 95.5 mm 1613.6 x 970.0 x 98.5 mm 53.5 x 32.3 x 3.7 inches 63.5 x 38.2 x 3.9 inches
with stand Weight 57.5 kg / 126.7 lbs 81.0 kg / 178.6 lbs without stand 48.5kg / 106.9 lbs 65.0 kg / 143.3 lbs
Power requirement AC100-240V~ 50/60Hz 4.5A AC100-240V~ 50/60Hz 6.5A Power Consumption 450W 650W
Television System PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’ Program Coverage VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47 External Antenna Impedance 75 Ω Operating Temperature 0 ~ 40°C / 32 ~ 104°F Operating Humidity Less than 80% Environment condition Storage Temperature -20 ~ 60°C / -4 ~ 140°F Storage Humidity Less than 85%
37LF7* 42LF7* MODELS 37LF75-ZD 42LF75-ZD
929.0 x 709.1 x 301.9 mm 1030.8 x 779.8 x 333.2mm Dimensions with stand 36.6 x 27.9 x 11.9 inches 40.58 x 30.7 x 13.1 inches (Width x Height x Depth) without stand 929.0 x 633.3 x 88 mm 1030.8 x 693 x 88.5 mm 36.6 x 24.9 x 3.5 inches 40.58 x 27.28 x 3.48 inches
with stand Weight 21.8 kg / 48.1 lbs 27.2 kg / 59.96 lbs APPENDIX without stand 18.6 kg / 41.0 lbs 23.3 kg / 51.3 lbs
Power requirement AC100-240V~ 50/60Hz 1.8A AC100-240V~ 50/60Hz 2.3A Power Consumption 18 0 W 230W
Television System PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’ Program Coverage VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47 External Antenna Impedance 75 Ω Operating Temperature 0 ~ 40°C / 32 ~ 104°F Operating Humidity Less than 80% Environment condition Storage Temperature -20 ~ 60°C / -4 ~ 140°F Storage Humidity Less than 85% The specifications shown above may be changed without prior notice for quality improvement.
97 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
PROGRAMMING THE REMOTE CONTROL (Only 37/42/47/52LY9*, 50/60PF9*)
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
1 To find out whether your remote can operate the device without programming, turn on the device such as a DVD or VCR and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote need not to be programmed.
If not, the remote should be programmed to operate the device. The programming procedures are explained below.
2 Press the MENU and MUTE button continuously at the same time for 2 seconds, the current selected device button will be illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2.
APPENDIX 3 Enter code numbers using the number button on the remote by referring the code table on the following pages. When pressing the button, the light blinks at a time.
If the device turned off, the programming is successful.
4 Press the MENU button to store the code. After blinking twice, this code is stored.
5 Test the remote functions to see if the device responds properly. If not, repeat from step 2.
98 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
A VCRs
Brand Codes Brand Codes Brand Codes Brand Codes AIWA 034 KENWOOD 014 034 039 043 PORTLAND 108 TATUNG 039 043 AKAI 016 043 046 124 047 048 PULSAR 072 TEAC 034 039 043 125 146 LG (GOLDSTAR) 001 012 013 020 QUARTZ 011 014 TECHNICS 031 033 070 AMPRO 072 101 106 114 123 QUASAR 033 066 075 145 TEKNIKA 019 031 033 034 ANAM 031 033 103 LLOYD 034 RCA 013 020 033 034 101 AUDIO DYNAMICS 012 023 039 043 LXI 003 009 013 014 040 041 062 063 THOMAS 034 BROKSONIC 035 037 129 017 034 101 106 107 109 140 144 TMK 006 CANON 028 031 033 MAGIN 040 145 147 TOSHIBA 008 013 042 047 CAPEHART 108 MAGNAVOX 031 033 034 041 REALISTIC 003 008 010 014 059 082 112 131 CRAIG 003 040 135 067 068 031 033 034 040 TOTEVISION 040 101 CURTIS MATHES 031 033 041 MARANTZ 012 031 033 067 053 054 101 UNITECH 040 DAEWOO 005 007 010 064 069 RICO 058 VECTOR RESEARCH 012 065 108 110 111 MARTA 101 RUNCO 148 VICTOR 048 112 116 117 119 MATSUI 027 030 SALORA 014 VIDEO CONCEPTS 012 034 046 DAYTRON 108 MEI 031 033 SAMSUNG 032 040 102 104 VIDEOSONIC 040 DBX 012 023 039 043 MEMOREX 003 010 014 031 105 107 109 112 WARDS 003 013 017 024 DYNATECH 034 053 033 034 053 072 113 115 120 122 031 033 034 040 ELECTROHOME 059 101 102 134 139 125 053 054 131 EMERSON 006 017 025 027 MGA 045 046 059 SANSUI 022 043 048 135 YAMAHA 012 034 039 043 029 031 034 035 MINOLTA 013 020 SANYO 003 007 010 014 ZENITH 034 048 056 058 036 037 046 101 MITSUBISHI 013 020 045 046 102 134 072 080 101 129 131 138 153 049 051 059 061 SCOTT 017 037 112 129 FISHER 003 008 009 010 151 131 FUNAI 034 MTC 034 040 SEARS 003 008 009 010 GE 031 033 063 072 MULTITECH 024 034 013 014 017 020 107 109 144 147 NEC 012 023 039 043 031 042 073 081 GO VIDEO 132 136 048 101 HARMAN KARDON 012 045 NORDMENDE 043 SHARP 031 054 149 HITACHI 004 018 026 034 OPTONICA 053 054 SHINTOM 024 043 063 137 150 PANASONIC 066 070 074 083 SONY 003 009 031 052 INSTANTREPLAY 031 033 133 140 145 056 057 058 076 JCL 031 033 PENTAX 013 020 031 033 077 078 149 JCPENNY 012 013 015 033 063 SOUNDESIGN 034 040 066 101 PHILCO 031 034 067 STS 013 JENSEN 043 PHILIPS 031 033 034 054 SYLVANIA 031 033 034 059 JVC 012 031 033 043 067 071 101 067 048 050 055 060 PILOT 101 SYMPHONIC 034 130 150 152 PIONEER 013 021 048 TANDY 010 034
A DVD APPENDIX
Brand Codes Brand Codes Brand Codes Brand Codes
APEX DIGITAL 022 MAGNAVOX 013 PHILIPS 013 SONY 007 DENON 020 014 MARANTZ 024 PIONEER 004 026 THOMPSON 005 006 GE 005 006 MITSUBISHI 002 PROCEED 021 TOSHIBA 019 008 HARMAN KARDON 027 NAD 023 PROSCAN 005 006 YAMAHA 009 018 JVC 012 ONKYO 008 017 RCA 005 006 ZENITH 010 016 025 LG 001 010 016 025 PANASONIC 003 009 SAMSUNG 011 015
99 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
PROGRAMMING THE REMOTE CONTROL (Only 37/42/47/52LF6*,37/42LF7*)
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-con- trollable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode
1 Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds properly. If not, the remote requires programming to operate the device.
2 Turn on the component to be programmed, then press the corresponding mode button (such as a DVD or VCR) on the remote control. The remote control button of desired device is lighted.
3 Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code.
4 Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.
5 Press the MENU button to store the code.
6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2. APPENDIX
DVD Brand Codes Brand Codes Brand Codes APEX DIGITAL 022 MITSUBISHI 002 RCA 005 006 DENON 020 014 NAD 023 SAMSUNG 011 015 GE 005 006 ONKYO 008 017 SONY 007 HARMAN KARDON 027 PANASONIC 003 009 THOMPSON 005 006 JVC 012 PHILIPS 013 TOSHIBA 019 008 LG 001 010 016 025 PIONEER 004 026 YAMAHA 009 018 MAGNAVOX 013 PROCEED 021 ZENITH 010 016 025 MARANTZ 024 PROSCAN 005 006
100 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
VCR
Brand Codes Brand Codes Brand Codes AIWA 034 MAGNAVOX 031 033 034 041 SAMSUNG 032 040 102 104 AKAI 016 043 046 124 067 068 105 107 109 112 125 146 MARANTZ 012 031 033 067 113 115 12 0 12 2 AMPRO 072 069 125 ANAM 031 033 103 MARTA 101 SANSUI 022 043 048 135 AUDIO DYNAMICS 012 023 039 043 MATSUI 027 030 SANYO 003 007 010 014 BROKSONIC 035 037 129 MEI 031 033 102 134 CANON 028 031 033 MEMOREX 003 010 014 031 SCOTT 017 037 112 129 CAPEHART 108 033 034 053 072 131 CRAIG 003 040 135 101 102 134 139 SEARS 003 008 009 010 CURTIS MATHES 031 033 041 MGA 045 046 059 013 014 017 020 DAEWOO 005 007 010 064 MINOLTA 013 020 031 042 073 081 065 108 110 111 MITSUBISHI 013 020 045 046 101 112 116 117 119 049 051 059 061 SHARP 031 054 149 DAYTRON 108 151 SHINTOM 024 DBX 012 023 039 043 MTC 034 040 SONY 003 009 031 052 DYNATECH 034 053 MULTITECH 024 034 056 057 058 076 ELECTROHOME 059 NEC 012 023 039 043 077 078 149 EMERSON 006 017 025 027 048 SOUNDESIGN 034 029 031 034 035 NORDMENDE 043 STS 013 036 037 046 101 OPTONICA 053 054 SYLVANIA 031 033 034 059 129 131 138 153 PANASONIC 066 070 074 083 067 FISHER 003 008 009 010 133 140 145 SYMPHONIC 034 FUNAI 034 TANDY 010 034 GE 031 033 063 072 PENTAX 013 020 031 033 TATUNG 039 043 107 109 144 147 063 TEAC 034 039 043 GO VIDEO 132 136 PHILCO 031 034 067 TECHNICS 031 033 070 HARMAN KARDON 012 045 PHILIPS 031 033 034 054 TEKNIKA 019 031 033 034 HITACHI 004 018 026 034 067 071 101 101 043 063 137 150 PILOT 101 THOMAS 034 INSTANTREPLAY 031 033 PIONEER 013 021 048 TMK 006 JCL 031 033 PORTLAND 108 TOSHIBA 008 013 042 047 APPENDIX JCPENNY 012 013 015 033 PULSAR 072 059 082 112 131 040 066 101 QUARTZ 011 014 TOTEVISION 040 101 JENSEN 043 QUASAR 033 066 075 145 UNITECH 040 JVC 012 031 033 043 RCA 013 020 033 034 VECTOR RESEARCH 012 048 050 055 060 040 041 062 063 VICTOR 048 130 150 152 107 109 140 144 VIDEO CONCEPTS 012 034 046 KENWOOD 014 034 039 043 145 147 VIDEOSONIC 040 047 048 REALISTIC 003 008 010 014 WARDS 003 013 017 024 LG (GOLDSTAR) 001 012 013 020 031 033 034 040 031 033 034 040 101 106 114 123 053 054 101 053 054 131 LLOYD 034 RICO 058 YAMAHA 012 034 039 043 LXI 003 009 013 014 RUNCO 148 ZENITH 034 048 056 017 034 101 106 SALORA 014 058 072 080 101 MAGIN 040
101 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX IR CODES 1. How to Connect
A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes
A Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz
Tc Carrier frequency FCAR = 1/TC = fOSC/12 T1 Duty ratio = T1/TC = 1/3
A Configuration of frame 1st frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code Tf
A Lead code
9 ms 4.5 ms
A Repeat code
0.55 ms APPENDIX
9 ms 2.25 ms
A Bit description Bit ”0” Bit ”1”
0.56 ms 0.56 ms
1.12 ms 2.24 ms
A Frame interval: Tf The waveform is transmitted as long as a key is depressed.
Tf Tf
Tf=108ms @455KHz
102 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Code (Hexa) Function Note 00 PR (D) or PR + R/C BUTTON 01 PR (E) or PR - R/C BUTTON 02 VOL (D) or VOL + R/C BUTTON 03 VOL (E) or VOL - R/C BUTTON 40 Up (D) R/C BUTTON 41 Down (E) R/C BUTTON 06 Right (G) R/C BUTTON 07 Left (F) R/C BUTTON 08 POWER R/C BUTTON (POWER ON/OFF) 09 MUTE R/C BUTTON 10 Number Key 0 R/C BUTTON 11 Number Key 1 R/C BUTTON 12 Number Key 2 R/C BUTTON 13 Number Key 3 R/C BUTTON 14 Number Key 4 R/C BUTTON 15 Number Key 5 R/C BUTTON 16 Number Key 6 R/C BUTTON 17 Number Key 7 R/C BUTTON 18 Number Key 8 R/C BUTTON 19 Number Key 9 R/C BUTTON 0B INPUT R/C BUTTON AA INFO i R/C BUTTON AB GUIDE R/C BUTTON 56 SUBTITLE R/C BUTTON 5B EXIT R/C BUTTON 1E FAV R/C BUTTON 1A Q.VIEW R/C BUTTON 50 D/A R/C BUTTON F0 TV/RADIO R/C BUTTON 7E SIMPLINK R/C BUTTON E0 BRIGHT + R/C BUTTON E1 BRIGHT - R/C BUTTON 0A I/II R/C BUTTON 0E SLEEP R/C BUTTON 43 MENU R/C BUTTON 44 OK( ) R/C BUTTON 53 LIST R/C BUTTON 20 TEXT R/C BUTTON 2A REVEAL R/C BUTTON 26 TIME R/C BUTTON 28 BACK R/C BUTTON 62 UPDATE R/C BUTTON
70 INDEX R/C BUTTON APPENDIX 65 HOLD R/C BUTTON 61 BLUE Key R/C BUTTON 63 YELLOW Key R/C BUTTON 71 GREEN Key R/C BUTTON 72 RED Key R/C BUTTON 79 RATIO R/C BUTTON B0 G R/C BUTTON BA II R/C BUTTON B2 IFF R/C BUTTON B3 IGG R/C BUTTON 8F FF R/C BUTTON 8E GG R/C BUTTON B1 A R/C BUTTON BD O R/C BUTTON 4D PICTURE R/C BUTTON (Only 37/42/47/52LY9*, 50/60PF9*) 52 SOUND R/C BUTTON (Only 37/42/47/52LY9*, 50/60PF9*)
103 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
PCMCIA EJECT CARD SLOT RS-232C Setup HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 O ANTENNA Connect the RS-232C (serial port) input jack to an IN VIDEO AUDIO OPTICAL external control device (such as a computer or an A/V AUDIO DIGITAL
control system) to control the product’s functions RS-232C IN (CONTROL & SERVICE) externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
Type of Connector; D-Sub 9-Pin Male
No. Pin Name
1 No connection
2 RXD (Receive data) 1 5 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 6 9 8 CTS (Clear to send) 9 No Connection APPENDIX RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations(Not standard) PC TV PC TV RXD 2 3 TXD RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DSR DTR 4 6 DTR DSR 6 4 DTR DSR 6 4 DSR RTS 7 8 CTS RTS 7 7 RTS CTS 8 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9
104 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
INFO i S GUIDE UBTITLE TV/RADIO SLEEP BACK
RATIO PICTURE Set ID I/II SOUND BACK INFO i MENU TEXT MENU EXIT EXIT GUIDE
Use this function to specify a set ID number. OK OK Refer to ‘Real Data Mapping’. G p.109
FAV VOL PR
VOL Q.VIEW PR MUTE MUTE 123
SETUPO Language PICTUREO Country Press the MENU button and then use D or E button AUDIOO Lock System Parental Control 1 TIMEO to select the OPTION menu. Input Label OPTIONO SIMPLINK SCREENO Factory Mode
Press the G button and then use D or E button to 2 select Factory Mode. Move MENU Prev. 1
Press the G button and then use D or E button to 3 select Set ID. Language Set ID Country 1 Lock System Factory Reset Parental Control OK Press the F or G button to adjust Set ID to choose Input Label 4 SIMPLINK ISM Method the desired TV ID number. The adjustment range of Factory Mode G Normal SET ID is 1~99. Low Power Off APPENDIX
5 Press EXIT button to return to normal TV viewing. 2
Language Set ID Country F G 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode Normal Low Power Off
3 4
105 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
Communication Parameters
A Baud rate : 9600 bps (UART) A Stop bit : 1 bit A Data length : 8 bits A Communication code : ASCII code A Parity : None A Use a crossed (reverse) cable.
Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA Transmission 1 2 (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power k a 0 ~ 1 * [Command 1] : First command to control the set. 02. Input Select k b Refer to p. 107 (j, k, m or x) 03. Aspect Ratio k c Refer to p. 107 * [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose 04. Screen Mute k d 0 ~ 1 * desired monitor ID number in option 05. Volume Mute k e 0 ~ 1 menu. 06. Volume Control k f 0 ~ 64 Adjustment range is 1 ~ 99. 07. Contrast k g 0 ~ 64 When selecting Set ID ‘0’, every 08. Brightness k h 0 ~ 64 connected the set is controlled. 09. Colour k i 0 ~ 64 Set ID is indicated as decimal (1~99) on 10. Tint k j 0 ~ 64 menu and as Hexa decimal (0x0~0x63) 11. Sharpness k k 0 ~ 64 on transmission/receiving protocol. [DATA] : To transmit command data. 12. OSD Select k l 0 ~ 1 * Transmit ‘FF’ data to read status of 13. Remote control lock mode k m 0 ~ 1 command. 14. Balance k t 0 ~ 64 * [Cr] : Carriage Return 15. Colour Temperature k u 0 ~ 3 ASCII code ‘0x0D’ 16. Red Adjustment k v 0 ~ 50 * [ ] : ASCII code ‘space (0x20)’ 17. Green Adjustment k w 0 ~ 50 18. Blue Adjustment k $ 0 ~ 50 OK Acknowledgement 19. Abnormal Status k z 0 ~ 9 [Command2][ ][Set ID][ ][OK][Data][x] APPENDIX 20. ISM Method j p Refer to p. 109 * The set transmits ACK (acknowledgement) based on 21 . L ow Powe r j q 0 ~ 1 this format when receiving normal data. At this time, if 22. Auto Configure j u 1 the data is data read mode, it indicates present status 23. Channel Select Command m a Refer to p. 110 data. If the data is data write mode, it returns the 24. Send IR Code m c Key Code data of the PC computer. 25. Input select (Main) x b Refer to p. 110 Error Acknowledgement * When setting the 19 ~ 25, a menu doesn’t display on screen. [Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.
Data 1: Illegal Code 2: not support function 3: Wait more time
106 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
01. Power (Command 2 : a) 04. Screen Mute (Command 2 : d) G To control Power On/Off of the set. G To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On Data 0 : Screen mute off (Picture on) Ack 1 : Screen mute on (Picture off) [a][ ][Set ID][ ][OK][Data][x] Ack G To show Power On/Off. [d][ ][Set ID][ ][OK][Data][x] Transmission 05. Volume Mute (Command 2 : e) [k][a][ ][Set ID][ ][FF][Cr] G To control volume mute on/off. Ack You can also adjust mute using the MUTE button on remote control. [a][ ][Set ID][ ][OK][Data][x] Transmission * In like manner, if other functions transmit ‘0xFF’ data [k][e][ ][Set ID][ ][Data][Cr] based on this format, Acknowledgement data feed back Data 0 : Volume mute on (Volume off) presents status about each function. 1 : Volume mute off (Volume on) 02. Input Select (Command 2 : b) Ack G To select input source for the set. [e][ ][Set ID][ ][OK][Data][x] You can also select an input source using the INPUT button on the set's remote control. 06. Volume Control (Command 2 : f) Transmission G To adjust volume. You can also adjust volume with the VOLUME buttons on [k][b][ ][Set ID][ ][Data][Cr] remote control. Data 0 : DTV 6 : RGB-PC Transmission 1 : Analogue 7 : HDMI1 [k][f][ ][Set ID][ ][Data][Cr] 2 : AV1 8 : HDMI2 Data Min : 0 ~ Max : 64 3 : AV2 9 : HDMI3(Only 37/42LF7*, Refer to ‘Real data mapping 1’. See page 109. 4 : AV3 42LY99) * 5 : Component Ack Ack [f][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][OK][Data][x] 07. Contrast (Command 2 : g) 03. Aspect Ratio (Command 2 : c) (Main Picture Size) G To adjust screen contrast. You can also adjust contrast in the PICTURE menu. G To adjust the screen format. (Main picture format) You can also adjust the screen format using the RATIO Transmission
(Aspect Ratio Control) button on remote control or in [k][g][ ][Set ID][ ][Data][Cr] APPENDIX the SCREEN menu. Data Min : 0 ~ Max : 64 Transmission * Refer to ‘Real data mapping 1’. See page 109. [k][c][ ][Set ID][ ][Data][Cr] Ack Data 1 : Normal screen (4:3) 6 : Original [g][ ][Set ID][ ][OK][Data][x] 2 : Wide screen (16:9) 7 : 14:9 3 : Horizon (Spectacle) 8 : Full (Except 42LY99) 08. Brightness (Command 2 : h) (Except 37/42LF7*, 42LY99) 9 : 1:1 Pixel G To adjust screen brightness. 4 : Zoom1 (or Just Scan You can also adjust brightness in the PICTURE menu. 5 : Zoom2 (Only 37/42LF7*, 42LY99) Transmission Ack [k][h][ ][Set ID][ ][Data][Cr] [c][ ][Set ID][ ][OK][Data][x] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 109. * Using the PC input, you select either 16:9 or 4:3 Ack screen aspect ratio. [h][ ][Set ID][ ][OK][Data][x] * In HDMI (1080i 50Hz/60Hz, 1080p 24Hz/50Hz/60Hz) mode, 1:1 Pixel(or Just Scan (Only 37/42LF7*, 42LY99)) is available. 107 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
09. Colour (Command 2 : i) 14. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. You can also adjust balance in the AUDIO menu. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1’. See page 109. * * Refer to ‘Real data mapping 1’. See page 109. Ack Ack [i][ ][Set ID][ ][OK][Data][x] [t][ ][Set ID][ ][OK][Data][x] 10. Tint (Command 2 : j) G To adjust the screen tint. 15. Colour Temperature (Command 2 : u) You can also adjust tint in the PICTURE menu. G To adjust colour temperature. You can also adjust Colour Transmission Temperature in the PICTURE menu. [k][j][ ][Set ID][ ][Data][Cr] Transmission Data Red : 0 ~ Green : 64 [k][u][ ][Set ID][ ][Data][Cr] Refer to ‘Real data mapping 1’. See page 109. * Data 0: Cool 1: Medium 2: Warm 3: User Ack Ack [j][ ][Set ID][ ][OK][Data][x] [u][ ][Set ID][ ][OK][Data][x] 11. Sharpness (Command 2 : k) G To adjust the screen sharpness. 16. Red Adjustment (Command 2 : v) You can also adjust sharpness in the PICTURE menu. Transmission G To adjust red in colour temperature. [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 109. Data Min : 0 ~ Max : 50 Ack * Refer to ‘Real data mapping 2’. See page 109. Ack [k][ ][Set ID][ ][OK][Data][x] [v][ ][Set ID][ ][OK][Data][x] 12. OSD Select (Command 2 : l) G To select OSD (On Screen Display) on/off when con- trolling remotely. 17. Green Adjustment (Command 2 : w) G Transmission To adjust green in colour temperature. Transmission [k][l][ ][Set ID][ ][Data][Cr] [k][w][ ][Set ID][ ][Data][Cr]
APPENDIX Data 0 : OSD off 1 : OSD on Ack Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 109. [l][ ][Set ID][ ][OK][Data][x] Ack 13. Remote control lock mode (Command 2 : m) [w][ ][Set ID][ ][OK][Data][x] G To lock the front panel controls on the monitor and remote control. 18. Blue Adjustment (Command 2 : $) Transmission G To adjust blue in colour temperature. [k][m][ ][Set ID][ ][Data][Cr] Transmission Data 0 : Lock off 1 : Lock on [k][$][ ][Set ID][ ][Data][Cr] Ack Data Min : 0 ~ Max : 50 [m][ ][Set ID][ ][OK][Data][x] * Refer to ‘Real data mapping 2’. See page 109. * If you’re not using the remote control, use this mode. Ack When main power is on/off, external control lock is [$][ ][Set ID][ ][OK][Data][x] released.
108 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
19. Abnormal State (Command 2 : z) 21. Low Power (Command 1 : j, Command 2 : q) G To recognize an abnormal state. Transmission G To reduce the power consumption of the set. You can also adjust Low Power in OPTION menu. [k][z][ ][Set ID][ ][FF][ ][Cr] It’s not available to use this function in LCD TV models. Data FF : Read Transmission Ack [z][ ][Set ID][ ][OK][Data][x] [j][q][ ][Set ID][ ][Data][ ][Cr] Data 0: Normal (Power on and signal exist) Data 0 : Off 1 : On 1: No signal (Power on) 2: Turn the monitor off by remote control Ack 3: Turn the monitor off by sleep time function [q][ ][Set ID][ ][OK/NG][Data][x] 4: Turn the monitor off by RS-232C function 5: 5V down 6: AC down 7: Turn the monitor off by Fan Alarm function 8: Turn the monitor off by Off time function 9: Turn the monitor off by Auto sleep function
* This function is “read only”.
20. ISM Method (Command 1 : j, Command 2 : p) G To control the ISM method. You can also adjust ISM Method in OPTION menu. It’s not available to use this function in LCD TV models. Transmission Data 0: Normal 2: Orbiter 1: White wash 3: Inversion Ack [p][ ][Set ID][ ][OK/NG][Data][x] APPENDIX
* Real data mapping 1 * Real data mapping 2 0 : Step 0 0:-40 1:-39 A : Step 10 (Set ID 10) 2:-38 F: Step 15 (Set ID 15) 10: Step 16 (Set ID 16) 28 : 0 64: Step 100 4E : +38 4F : +39 6E : Step 110 50 : +40 73: Step 115 74: Step 116 C7: Step 199 FE : Step 254 FF : Step 255
109 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
APPENDIX
22. Auto Configure 25. Input select (Command 1 : x, Command 2 : b) (Command 1 : j, Command 2 : u) (Main Picture Input) G To adjust picture position and minimize image shaking G To select input source for main picture. automatically. It works only in RGB (PC) mode. Transmission Transmission [x][b][ ][Set ID][ ][Data][Cr] [j][u][ ][Set ID][ ][Data][Cr] Data Structure Data 1: To set Ack MSB LSB [u][ ][Set ID][ ][OK/NG][Data][x] 0 0 0 0 0 0 0 0 External Input Input Number 23. Channel Select Command (Command 1 : m, Command 2 : a) External Input Data G Select channel to following physical number. 0000 DTV Transmission 0 0 0 1 Analogue [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] 0010 AV Data0 :High channel data Data1 :Low channel data 0 0 1 1 Component ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), 0100 RGB DTV No. 0 -> Don’t care Data2 0x00 : ATV Main 0 1 0 1 HDMI 0x10 : DTV Main Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Input Number Data Digital - Min: 00 ~ Max: 3E7 (0~999) 0 0 0 0 Input1 Ack 0 0 0 1 Input2 [a][ ][Set ID][ ][OK/NG][Data][x] 0 0 1 0 Input3 Data Min: 00 ~ Max: FF 0 0 1 1 Input4
Ack [b][ ][Set ID][ ][OK/NG][Data][x] 24. Send IR Code (Command 1 : m, Command 2 : c) G To send IR remote key code.
APPENDIX Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 103. Ack [c][ ][Set ID][ ][OK/NG][Data][x]
110 Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals