Resistive Micromegas

Total Page：16

File Type：pdf, Size：1020Kb

CERN Technology Portfolio RESISTIVE MICROMEGAS Detector Read-Out Interface for an Avalanche Particle Detector. This technology is an interface between a detector vessel and a read-out structure AREA OF EXPERTISE for an avalanche particle detector, in particular for a MicroPattern Gas Detector (MPGD) such as the MicroMegas detector. • Microelectronics. • High performance In this invention the various elements of the structure are optimised in such a way detectors. the electronic signal is not lost through the resistive layer but is propagated to a separate plane, carrying read-out pads or strips, by capacitive coupling. There is complete separation between the Micromegas detector and the read-out electronic plane. The technology: IP STATUS • Reduces the charge released by Micromegas during spark formation. It provides spark protection to electronics. • Patent application filed. • Easily accommodates any read-out electronics by separating detector function and electronics function. • In the case of using integrated pixel chips this structure would solve a technical problem, related to the implementation of many chips, without creating dead space. CONTACT PERSON APPLICATIONS [email protected] The use of the ceramic structure could permit the fabrication of a seal detector which is a must for many industrial applications: Find out more at: industrial fluorescence, radiology, UV photodetector. kt.cern ADVANTAGES • Electronics protection. • Seal detector. • Compatibility with any read-out system and especially with integrated micropixel systems. • Good potential for interchangeable detectors/read-out if built to a standard format. LIMITATIONS • Compared to the Bulk Micromegas technology, the disadvantage is that new technology will not compete for fabricating very large detectors of the order of 1x1 m2. RELATED PUBLICATIONS • P. Colas et al., Nucl. Instr. and Meth. A 535 (2004) p.506. • Bilevych et al., Nucl.Instrum.Meth. A629 (2011) 66-73. • M. Campbell et al., Nucl.Instrum.Meth. A540 (2005) 295- 304. Knowledge Transfer Accelerating Innovation.

Copy Link

Recommended publications

Current Status and Future Developments of Micromegas Detectors for Physics and Applications
applied sciences Review Current Status and Future Developments of Micromegas Detectors for Physics and Applications David Attié , Stephan Aune, Eric Berthoumieux , Francesco Bossù , Paul Colas, Alain Delbart, Emmeric Dupont, Esther Ferrer Ribas , Ioannis Giomataris , Aude Glaenzer , Hector Gómez , Frank Gunsing, Fanny Jambon, Fabien Jeanneau , Marion Lehuraux, Damien Neyret, Thomas Papaevangelou * , Emanuel Pollacco , Sébastien Procureur , Maxence Revolle , Philippe Schune, Laura Segui , Lukas Sohl * , Maxence Vandenbroucke and Zhibo Wu † CEA, Institut de Recherche sur les Lois Fondamentales de l’Univers, Université Paris-Saclay, 91191 Gif-sur-Yvette, France; [email protected] (D.A.); [email protected] (S.A.); [email protected] (E.B.); [email protected] (F.B.); [email protected] (P.C.); [email protected] (A.D.); [email protected] (E.D.); [email protected] (E.F.R.); [email protected] (I.G.); [email protected] (A.G.); [email protected] (H.G.); [email protected] (F.G.); [email protected] (F.J.); [email protected] (F.J.); [email protected] (M.L.); [email protected] (D.N.); [email protected] (E.P.); [email protected] (S.P.); [email protected] (M.R.); [email protected] (P.S.); [email protected] (L.S.); [email protected] (M.V.); [email protected] (Z.W.) * Correspondence: [email protected] (T.P.); [email protected] (L.S.) † Also: Department of Modern Physics, University of Science and Technology of China, Hefei 230026, China. Abstract: Micromegas (MICRO-MEsh GAseous Structure) detectors have found common use in Citation: Attié, D.; Aune, S.; different applications since their development in 1996 by the group of I.
[Show full text]
Effect of Mesh Geometry on Resistive Micromegas for the ATLAS
Micro-Pattern Gaseous Detectors Conference 2019 IOP Publishing Journal of Physics: Conference Series 1498 (2020) 012031 doi:10.1088/1742-6596/1498/1/012031 Effect of mesh geometry on resistive Micromegas for the ATLAS experiment Ourania Sidiropoulou on behalf of the ATLAS Muon Collaboration CERN, Esplanade des Particules 1, 1211 Meyrin, Switzerland E-mail: [email protected] Abstract. The ATLAS Experiment will use resistive Micromegas detectors for the upgrade of the forward Muon System (NSW, for New Small Wheel). With the test of the first production modules, instabilities in the detector operation have been observed, leading to a systematic revision of the selected construction components and working parameters. In particular, the effect of the mesh geometry with respect to the discharge behaviour was studied using a special Micromegas detector designed and built by the ATLAS CERN group in 2014. The detector has a Micromegas structure similar to the one later on adopted by the NSW project; moreover it provides the possibility to easily replace the mesh. The test procedure consisted in measuring current, gain and counting rate from a 55Fe X-ray source, as a function of the amplification voltage up to the discharge limit. The systematic analysis of the data allowed us to draw conclusions on the stability interval of six different types of mesh, including the one chosen to be used for the NSW, consistent with the expectations. Results suggested that the mesh selected for the NSW (among the few available in the requested big size), was not optimal for operation with a safe plateau at high gain before discharges start to occur.
[Show full text]
MICROMEGAS Chambers for Hadronic Calorimetry, Search for New Physics in the Field of the Top Quark Ambroise Espargilière
MICROMEGAS Chambers for Hadronic Calorimetry, Search for New Physics in the Field of the Top Quark Ambroise Espargilière To cite this version: Ambroise Espargilière. MICROMEGAS Chambers for Hadronic Calorimetry, Search for New Physics in the Field of the Top Quark. High Energy Physics - Experiment [hep-ex]. Université de Grenoble, 2011. English. tel-00657129v1 HAL Id: tel-00657129 https://tel.archives-ouvertes.fr/tel-00657129v1 Submitted on 5 Jan 2012 (v1), last revised 17 Mar 2012 (v2) HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. THESE` Pour obtenir le diplomeˆ de DOCTEUR DE L’UNIVERSITE´ DE GRENOBLE Specialit´ e´ : Physique/Physique Subatomique & Astroparticules Arretˆ e´ ministerial´ : 7 aoutˆ 2006 Present´ ee´ par AMBROISE ESPARGILIERE` These` dirigee´ par Catherine ADLOFF et codirigee´ par Yannis KARYOTAKIS prepar´ ee´ au Laboratoire d'Annecy-le-vieux de Physique des Particules et de l’Ecole´ Doctorale de Physique de Grenoble Chambres MICROMEGAS pour la Calorimetrie´ Hadronique, Recherche d’une Nouvelle Physique dans le Domaine du Quark Top R&D pour un futur collisionneur lineaire´ These` soutenue publiquement le 21 septembre 2011, devant le jury compose´ de : Dr. Jean-Jacques BLAISING Directeur de Recherche au LAPP, Annecy-le-Vieux, President´ Dr.
[Show full text]
35. Particle Detectors at Accelerators
1 35. Particle Detectors at Accelerators 35. Particle Detectors at Accelerators Revised 2019. See the various sections for authors. 35.1 Introduction ....................................... 2 35.2 Photon detectors..................................... 3 35.2.1 Vacuum photodetectors .............................. 4 35.2.2 Gaseous photon detectors............................. 6 35.2.3 Solid-state photon detectors............................ 7 35.3 Organic scintillators................................... 8 35.3.1 Scintillation mechanism.............................. 9 35.3.2 Caveats and cautions................................ 10 35.3.3 Scintillating and wavelength-shifting fibers.................... 11 35.4 Inorganic scintillators .................................. 11 35.5 Cherenkov detectors................................... 16 35.6 Gaseous detectors .................................... 21 35.6.1 Energy loss and charge transport in gases.................... 21 35.6.2 Multi-Wire Proportional and Drift Chambers.................. 27 35.6.3 High Rate Effects.................................. 29 35.6.4 Micro-Pattern Gas Detectors ........................... 30 35.6.5 Time-projection chambers............................. 34 35.6.6 Transition radiation detectors (TRD’s)...................... 39 35.6.7 Resistive-plate chambers.............................. 42 35.7 Semiconductor detectors................................. 45 35.7.1 Materials Requirements .............................. 45 35.7.2 Detector Configurations.............................. 46
[Show full text]
Perspectives of Micro-Pattern Gaseous Detector Technologies for Future
arXiv: 1308.3047 M. Titov. Perspectives of MPGD Technologies for Future Physics Projects 1 PERSPECTIVES OF MICRO-PATTERN GASEOUS DETECTOR TECHNOLOGIES FOR FUTURE PHYSICS PROJECTS1 Maxim Titov CEA Saclay, IRFU/SPP, 91191, Gif sur Yvette, France A centenary after the invention of the basic principle of gas amplification, gaseous detectors - are still the first choice whenever the large area coverage with low material budget is required. Advances in photolithography and micro- processing techniques in the chip industry during the past two decades triggered a major transition in the field of gas detectors from wire structures to Micro-Pattern Gas Detector (MPGD) concepts, revolutionizing cell-size limitations for many gas detector applications. The high radiation resistance and excellent spatial and time resolution make them an invaluable tool to confront future detector challenges at the frontiers of research. The design of the new micro-pattern devices appears suitable for industrial production. In 2008, the RD51 collaboration at CERN has been established to further advance technological developments of MPGDs and associated electronic-readout systems, for applications in basic and applied research. This review provides an overview of the state-of-the-art of the MPGD technologies and summarizes recent activities for the next generation of colliders within the framework of the RD51 collaboration. 1. INTRODUCTION Future accelerator facilities are an indispensable step towards precision determination of the Standard Model parameters, constraining of the potential new physics contributions, or, alternatively precision New Physics studies, given LHC yield a hint of new physics presence. The quest for Higgs boson discovery with the multipurpose ATLAS and CMS detectors at the LHC, imposed major detector instrumentation work, and pulled most of the technologies to their performance limits.
[Show full text]
Single-Electron Response and Energy Resolution of a Micromegas Detector T
Single-electron response and energy resolution of a Micromegas detector T. Zerguerras, B. Genolini, V. Lepeltier, J. Peyre, J. Pouthas, P. Rosier To cite this version: T. Zerguerras, B. Genolini, V. Lepeltier, J. Peyre, J. Pouthas, et al.. Single-electron response and energy resolution of a Micromegas detector. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Elsevier, 2009, 608, pp.397-402. 10.1016/j.nima.2009.07.015. in2p3-00354226 HAL Id: in2p3-00354226 http://hal.in2p3.fr/in2p3-00354226 Submitted on 19 Jan 2009 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Single electron response and energy resolution of a Micromegas detector T. Zerguerras∗,a B. Genolinia, V. Lepeltier†,b, J. Peyréa, J. Pouthasa, P. Rosiera aInstitut de Physique Nucléaire (UMR 8608), CNRS/IN2P3-UniversitéParis-Sud, F-91406 Orsay Cedex, France b LAL, UniversitéParis-Sud, CNRS/IN2P3, Orsay, France Abstract Micro-Pattern Gaseous Detectors (MPGDs) such as Micromegas or GEM are used in particle physics experiments for their capabilities in particle tracking at high rates. Their excellent position resolutions are well known but their energy characteristics have been less studied.
[Show full text]
Beam and Detectors
Beam and detectors Beamline for Schools 2020 Note If you have participated in BL4S in the past, you may have read earlier versions of this document. Please note that in 2020 the BL4S experiments will take place at DESY, Hamburg, Germany and at LNF, Frascati, Italy. The conditions of the beam are different between the two facilities and are different from what CERN was offering until 2018. Please read this document carefully to understand if your experiment is feasible under the new conditions. Preface All the big discoveries in science have started by curious minds asking simple ques- tions: How? Why? This is how you should start. Then you should investigate with the help of this document whether your question could be answered with the available equipment (or with material that you can provide) and the particle beams of Beamline for Schools at DESY and LNF. As your proposal takes shape, you will be learning a lot about particle physics, detectors, data acquisition, data analysis, statistics and much more. You will not be alone during this journey: there is a list of volunteer physicists who are happy to interact with you and to provide you with additional information and advice. Remember: It is not necessary to propose a very ambitious experiment to succeed in the Beamline for Schools competition. We are looking for exciting and original ideas! 2 Contents Introduction4 The Beamline for Schools...........................4 Typical equipment................................4 Trigger and readout...............................5 The Beam Lines6 General.....................................6 Bending magnets.............................6 Collimator.................................6 DESY II Test Beam Facility...........................7 Beam production.............................7 Beam composition.............................7 The DESY test beam areas........................9 The Beam Facility at LNF............................9 Limitations of the LNF beamline....................
[Show full text]
Investigations of the VMM Readout Chip for Micromegas Detectors of the ATLAS New Small Wheel Upgrade
Investigations of the VMM readout chip for Micromegas Detectors of the ATLAS New Small Wheel Upgrade Untersuchungen des VMM Auslesechips fürMicromegas Detektoren des ATLAS New Small Wheel Upgrades Masterarbeit an der FakultätfürPhysik der Ludwig-Maximilians-UniversitätMünchen vorgelegt von Maximilian Paul Rinnagel geboren in München München, den 08.05.2019 Gutachter: Prof. Dr. Otmar Biebel Abstract Modern micropattern gaseous detectors with their highly segmented anodes achieve spatial resolutions close to that of silicon detectors and become thus of great interest for particle physics experiments. Micromegas (MICROMEsh GAseous Structures) detectors are foreseen as precision trackers for the upgrade of the forward muon spectrometer of the ATLAS detec- tor, the New Small Wheel (NSW). The huge number of readout strips and the accordingly rising background rate due to the steadily increasing luminosity of LHC require new readout electronics for these detectors. The aim of this master thesis was to study the new VMM front-end readout chip, which was designed and produced in the scope of the ATLAS New Small Wheel Upgrade. The chip is digitally recording the charge and timing information of a particle interacting in the detector. The readout frequency required for the high luminosity upgrade of LHC will be reached by this chip. With a 10x10 cm2 Micromegas detector equipped with a preliminary version of the VMM chip, studies were conducted on pulse height, cluster multiplicity, and angular resolution us- ing 22 MeV protons at the Tandem accelerator facility in Garching. The detector was hereby tilted to an angle of incidence of (21 ± 1)◦.
[Show full text]
Two Large-Area Anode-Pad MICROMEGAS Chambers As The
Two Large-Area Anode-Pad MICROMEGAS Chambers as the basic elements of a Pre-Shower Detector L. Aphecetche, H. Delagrange, D. G. d’Enterria, M. Le Guay, X. Li∗, G. Mart´ınez†, M.J. Mora, P. Pichot, D. Roy and Y. Schutz SUBATECH (Ecole des Mines de Nantes, IN2P3/CNRS, Universitéde Nantes ), BP 20722, 44307 Nantes Cedex 3, France Abstract The design of a detector based on MICROMEGAS (MICRO MEsh GAseous Structure) technology is presented. Our detector is characterized by a large active area of 398×281 mm2, a pad read-out with 20×22 mm2 segmentation, and an uniform amplification gap obtained by insulating spacers (100 µm high and 200 µm in diameter). The performances of several prototypes have been evaluated under irradiation with secondary beams of 2 GeV/c momentum charged pions and electrons. We consider such a detector as the basic element for a pre-shower detector to equip the PHOton Spectrometer (PHOS) of the ALICE experiment. Its assets are modularity, small amount of material, robustness and low cost. I. INTRODUCTION The main goal of experiments at relativistic heavy-ion colliders, like RHIC at Brookhaven and LHC at CERN, is to produce and study, in the laboratory, the primordial matter of the universe which is predicted to consist of a plasma of deconfined quarks and gluons (QGP). Among the various considered probes and related observables (strange hadrons, heavy mesons, di-electrons, etc.), direct photons will explore the partonic phase during the equilibration process, as well as the QGP phase itself [1–3]. In the ALICE (A Large Ion Collider Experiment) experiment at CERN [4], direct photons will be detected and identi- fied with PHOS (PHOton Spectrometer) [5].
[Show full text]
Investigation of Ion Backflow in Bulk Micromegas Detectors
Investigation of Ion Backflow in Bulk Micromegas Detectors Purba Bhattacharyaa, Deb Sankar Bhattacharyab;c, Supratik Mukhopadhyayb, Sudeb Bhattacharyad, Nayana Majumdarb, Sandip Sarkarb, Paul Colasc, David Attiec a School of Physical Sciences, National Institute of Science Education and Research, Jatni, Bhubaneswar - 752005, India b Applied Nuclear Physics Division, Saha Institute of Nuclear Physics, Kolkata - 700064, India c DSM/IRFU, CEA/Saclay, F-91191 Gif-sur-Yvette CEDEX, France d Retired Senior Professor, Applied Nuclear Physics Division, Saha Institute of Nuclear Physics, Kolkata - 700064, India Abstract The operation of gas detectors is often limited by secondary effects, originating from avalanche-induced photons and ions. Ion backflow is one of the effects limiting the operation of a gas detector at high flux, by giving rise to space charge which disturbs the electric field locally. For the Micromegas detector, a large fraction of the secondary positive ions created in the avalanche can be stopped at the micro-mesh. The present work involves measurements of the ion backflow fraction (using an experimental setup comprising of two drift planes) in bulk Micromegas detectors as a function of detector design parameters. These measured characteristics have also been compared in detail to numerical simulations using the Garfield framework that combines packages such as neBEM, Magboltz and Heed. Further, the effect of using a second micro-mesh on ion backflow and other parameters has been studied numerically. Keywords: Bulk Micromegas, Detector Geometry, Double Micro-mesh, Electric Field, Gain, Electron Transmission, Ion Backflow ∗Corresponding Author: Purba Bhattacharya arXiv:1605.02896v1 [physics.ins-det] 10 May 2016 E-mail: [email protected] 1 1 Introduction Micro Pattern Gaseous Detectors (MPGDs) [1] have played an important role in radiation detection and imaging in many fields such as particle-physics and nuclear-physics experiments, astro-particle research, medical imaging, material science etc [2].
[Show full text]
Micromegas-Based Detectors for Time-Of-Flight Measurements Of
EPJ Web of Conferences 239, 17007 (2020) https://doi.org/10.1051/epjconf/202023917007 ND2019 MicroMegas-based detectors for time-of-flight measurements of neutron-induced reactions 1, 1 1 2 1 1 1 F. Gunsing ∗, F. Belloni , E. Berthoumieux , M. Diakaki , E. Dupont , E. Ferrer-Ribas , and Th. Papaevangelou 1CEA - Irfu, University Paris-Saclay, F-91191 Gif-sur-Yvette, France 2CEA Cadarache, DEN/DER/SPRC/LEPh, F-13108 St-Paul-Lez-Durance, France Abstract. MicroMegas detectors are versatile gaseous detectors which are used for ionizing particle detection. A MicroMegas detector consists of two adjacent gas-filled volumes. One volume acts as a drift region with an electric field operating in the ionization chamber regime, the second volume is the amplification region acting as a parallel-plate avalanche counter. The use of the microbulk technique allows the production of thin, radiation resistant, and low-mass detector with a highly variable gain. Such MicroMegas detectors have been developed and used in combination with neutron time-of-flight measurements for in-beam neutron-flux monitoring, fission and light-charged particle reaction cross section measurements, and for neutron-beam imaging. An overview of MicroMegas detectors for neutron detection and neutron reaction cross section measurements and related results and developments will be presented. 1 Introduction useful at continuous neutron sources, typically as neutron monitors, but can be further extended to the use at pulsed Since the development of the first prototype, MicroMegas time-of-flight facilities, such as GELINA at JRC-Geel [9], detectors [1] are used in many experiments in nuclear and NFS at GANIL, or n_TOF at CERN [10].
[Show full text]
SU-8 As a Material for Microfabricated Particle Physics Detectors
Micromachines 2014, 5, 594-606; doi:10.3390/mi5030594 OPEN ACCESS micromachines ISSN 2072-666X www.mdpi.com/journal/micromachines Review SU-8 as a Material for Microfabricated Particle Physics Detectors Pietro Maoddi 1,2,*, Alessandro Mapelli 1, Sebastien Jiguet 3 and Philippe Renaud 2 1 Physics Department, European Organization for Nuclear Research (CERN), CH-1211 Geneva 23, Switzerland; E-Mail: [email protected] 2 Microsystems Laboratory, École Polytechnique Fédérale de Lausanne (EPFL), Station 17, CH-1015 Lausanne, Switzerland; E-Mail: [email protected] 3 Gersteltec Sàrl, General-Guisan 26, CH-1009 Pully, Switzerland; E-Mail: [email protected] * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +41-227-673-846. Received: 17 June 2014; in revised form: 1 August 2014 / Accepted: 4 August 2014 / Published: 26 August 2014 Abstract: Several recent detector technologies developed for particle physics applications are based on microfabricated structures. Detectors built with this approach generally exhibit the overall best performance in terms of spatial and time resolution. Many properties of the SU-8 photoepoxy make it suitable for the manufacturing of microstructured particle detectors. This article aims to review some emerging detector technologies making use of SU-8 microstructuring, namely micropattern gaseous detectors and microfluidic scintillation detectors. The general working principle and main process steps for the fabrication of each device are reported, with a focus on the advantages brought to the device functionality by the use of SU-8. A novel process based on multiple bonding steps for the fabrication of thin multilayer microfluidic scintillation detectors developed by the authors is presented.
[Show full text]