DOCSLIB.ORG

2004 Bellandcarlson Catalog.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2004 Bellandcarlson Catalog.Pdf 101 Allen Road • Dodge City, KS 67801 620-225-6688 • Fax: 620-225-9095 [email protected] Website: www.bellandcarlson.com Superior Design Because Bell and Carlson stocks have been designed and tested by hunters, 4 great new finish options, every shooter can benefit from the inno- now available on all vative features built into every stock. All Bell and Carlson stocks are designed to Bell and Carlson reduce recoil and withstand temperature centerfire rifle extremes, moisture and hard use. The stock pitch design increases contact with and shotgun the shoulder for better recoil distribution, while the increased stocks! angle of comb allows the cheek to fall away from the stock. Both of these design features reduce felt recoil, which reduces flinch and increases accuracy. Bell and Carlson stocks also have an increased pistol grip or wrist arch which gives the hand a more 97 - Olive Green natural and comfortable position on the rifle stock. with Black Spiderweb Accuracy, Strength, Feel ® The solid throughout Bell and Carlson composite stock with- stands more abuse than a wood or hollow plastic stock and is unaffected by atmospheric conditions. With a Bell and Carlson stock, the gun stays on target! Besides being impervious to NEW Breakup ® weather, having the benefits of strength, and the reduction of felt recoil, Bell and Carlson stocks are built to look and feel like a wood stock with which all shooters are familiar. 33 - Mossy Oak Fit and Finish Prior to finishing, an action is mounted to all Bell and Carlson TM stocks to ensure a proper fit. Any stock that does not precisely fit the barreled action is rejected. NaturalGear Easy Installation All Bell and Carlson stocks, unless indicated otherwise, are drop- in stocks designed to permit the customer to simply bolt the 21 - Snow barreled action into the stock. Bell and Carlson stocks are fit for current model factory standard barrel contours. It may be nec- essary to remove minimal amounts of material from the maga- zine well and/or barrel channel. Ordering Bell and Carlson Stocks and Accessories 34 - Realtree HD Bell and Carlson encourages the use of its Dealer/Distributor Hardwoods Green network. However, should you be unable to find the Bell and Carlson products you are looking, please contact one of our Customer Representatives at 620-225-6688. Questions? Please contact one of our Customer Representatives at 620-225-6688. BELL AND CARLSON 101 Allen Road / Dodge City, KS 67801 Tel: 620-225-6688 / Fax: 620-225-9095 Website: www.bellandcarlson.com [email protected] PAGE 2 © 2004 BELL AND CARLSON TEL: 620-225-6688 Choose from seventeen outstanding finish options available on Bell and Carlson centerfire rifle and shotgun stocks! The paint that is used for the five Bell and Carlson textured finishes is the toughest, most durable stock coating available in the market today. The practical, but very attractive textured finish provides a positive, firm grip in less than ideal weather conditions. 02 - Textured Black 23 - Gray with Black Spiderweb 22 - Black with Gray Spiderweb 30 - Tan with Black Spiderweb 97 - Olive Green with Black Spiderweb When ordering, the 2 digit finish number (ie: 02) becomes the last two digits of the item number (ie: 5131-02). Bell and Carlson is the only stock manufacturer to utilize a more durable, licensed hydrofilm process. This process also creates more defined camouflage patterns with better color intensity and sharpness. Dedicated and experienced hunters who pride themselves in their ability to get close to their game can choose from Bell and Carlson’s twelve popular and effective camouflage patterns. 12 - Freedom TanTM 03 - Carbelite CamoTM 13 - Freedom GreenTM 09 - Mossy Oak® ShadowgrassTM 19 - NaturalGearTM 11 - Mossy Oak® Breakup® 21 - Snow NaturalGearTM 33 - Mossy Oak® NEW Breakup® 29 - Trebark® SuperflaugeTM by Lynch 20 - Skyline ExcelTM 34 - Realtree 28 - Advantage CamouflageTM Hardwoods® Green HDTM When ordering, the 2 digit finish number (ie: 02) becomes the last two digits of the item number (ie: 5131-02). www.bellandcarlson.com © 2004 BELL AND CARLSON PAGE 3 The Medalist line of stocks combines the stability and durability of Bell and Carlson’s proprietary composite 23 - Gray with Black Spiderweb stock with an integral aluminum bedding system. The integral bedding system is computer designed and CNC machined out of aircraft grade 6061-T6 aluminum, and eliminates the need for conventional bedding, assures perfect fit and alignment of the barreled action and Integral Aluminum Bedding System stiffens the forend. Medalist stocks are available in all seventeen finish options. Other Medalist features include: • 13 1/2” length of pull standard, custom length of pull available for an additional charge • Hunting and sporting styles weight approximately 2.0 lbs, tactical models approximately 2.5 lbs • Choice of seventeen different finishes • Hunting and sporting styles come with a Pachmayr Decelerator recoil pad • Tactical styles come with a premium Bell and Carlson recoil pad • Uncle Mikes sling swivel studs installed 2194-___ Mauser 96 2960-___ Remington 700 BDL, Long Action Sporter style, fits Swedish Mauser 96 with step barrel, without Sporter style, fits models with hinged floorplate, 700 Safari Grade, adjustable trigger. Classic, Varmint Special with modifications. - .25-06, .270, 7mm, .30-06. 2193-___ Mauser 98 Sporter style, fits sporter action with taper barrel without adjustable 2197-___ Interarms MK X, Long/Short Action trigger, because of variations in actions modifications may be Sporter style, fits current model long or short action with magazine required - .30-06. area block - .22-250, .243, .25-06, .270, .308, .30-06. 6349-___ Weatherby MKV Weatherby style, with #2 contour barrel. 02 - Textured Black 6556-___ Weatherby MKV, Left Hand 2948-___ Mauser 98 Varmint/Tactical Weatherby style, with #1 contour barrel. Varmint/Tactical style, with wide beavertail forend, fits #2 barrel but can be opened up to fit larger barrels. NO CHECKERING OR CHEEKPIECE. 2971-___ Winchester Mod 70, Short Action Sporter style, fits current models with hinged floorplate and short 22 - Black with Gray Spiderweb action featherweights. Barrel channel with sight lug requires slight modification. Short action with magazine area block must use Long 6498-___ Weatherby MKV Accumark Magnum Action stock - .22-250, .223, .243, .250, .308 - Also fits WSM - .270, Weatherby style, fits all Magnum calibers from .257 to .460. 7mm, .300. 6962-___ Weatherby MKV Accumark Magnum, Left Hand Weatherby style, fits all Magnum calibers from .257 to .460. 6963-___ Weatherby MKV Ultra Light Magnum 02 - Textured Black and Standard Weatherby MKV Weatherby style, with #1 contour barrel. 2961-___ Remington 700 BDL, Short Action Sporter style, fits models with hinged floorplate, fits 700 Safari 2195-___ Weatherby MKV Ultra Light Magnum Grade, Classic and Varmint Special with modifications - .17, .22- and Standard Weatherby MKV 250, .222, .223, .243, 6mm, 7mm-08, .308. Sporter style, with #1 contour barrel. 02 - Textured Black 30 - Tan with Black Spiderweb 2092-___ Remington 700 BDL Varmint/Tactical, Short Action 6554-___ Weatherby MKV Varmint, Long Action Vertical grip style - .17 to .308. Weatherby style. 6501-___ Weatherby Vanguard/Howa 1500 Weatherby style, fits current model long action. 02 - Textured Black 6505-___ Weatherby Vanguard/Howa 1500 Weatherby style, fits current model short action. 2958-___ Remington 700 BDL Standard Varmint, Short Action Fits models with hinged floorplate, 700 Safari Grade, Classic, 2972-___ Winchester Mod 70 Varmint/Tactical, Short Action Varmint Special with modifications - .17, .22-250, .222, .223, .243, Sporter style, fits current model with hinged floorplate and heavy 6mm, 7mm-08, .308. barrel. NO CHEEKPIECE, CHECKERING ON PISTOL GRIP ONLY. 02 - Textured Black 33 - Mossy Oak® NEW Breakup® 03 - Carbelite CamoTM 34 - Realtree Hardwoods® 09 - Mossy Oak® ShadowgrassTM 13 - Freedom GreenTM 21 - Snow NaturalGearTM 28 - Advantage CamouflageTM Green HDTM 11 - Mossy Oak® Breakup® 19 - NaturalGearTM 22 - Black with Gray Spiderweb 29 - Trebark® SuperflaugeTM 97 - Olive Green 12 - Freedom TanTM 20 - Skyline ExcelTM 23 - Gray with Black Spiderweb 30 - Tan with Black Spiderweb with Black Spiderweb PAGE 4 © 2004 BELL AND CARLSON TEL: 620-225-6688 33 - Mossy Oak® NEW Breakup® Over the years, Carbelite Classic stocks have been the industries finest and most popular line of drop-in synthetic stocks. Carbelite Classic features and options include: • More models than any other stock design offered by Bell and Carlson • Easy installation • Choice of seventeen different finishes • Designed for scope use • Premium recoil pad installed • Uncle Mike sling studs installed • Grip and appearance enhancing checkering on most models • Optional reinforced lug for use with magnum calibers • Some right hand and left hand models available • Limited lifetime warranty on materials and workmanship 5131-___ Browning A-Bolt Hunter, Long Action Fits Stainless Stalker, Medallion, Gold Medallion and Big Horn Sheep - 25-06, .270, .280, .30-06. Does not fit A-Bolt II or BBR. 34 - Realtree Hardwoods® Green HDTM 5171-___ Enfield P14/17, Long Action 5021-___ *Remington 700 BDL, Long Action Fits Military style, Centurian P14 and Remington U.S. 1917, bent Fits models with hinged floorplate, fits 700 Safari Grade, Classic and floor plate for six shot mag - all calibers. Varmint Special with modifications - .25-06, .270, 7mm, .30-06. 5081-___ *Howa 1500, Long Action One piece trigger guard and magazine - .25-06, .270, .30-06. 5082-___ *Howa 1500, Short Action 22 - Black with Gray Spiderweb One piece trigger guard and mag - .22-250, .223, .243, .308. 5023-___ *Remington 700 BDL, Long Action, Left Hand 5111-___ *Interarms MK X, Long or Short Action Fits models with hinged floorplate, fits 700 Safari Grade, Fits current model action or short action with magazine area block - Classic and Varmint Special with modifications - .25-06, .270, 7mm, .22-250, .243, .25-06, .270, .308, .30-06.
Load more

Recommended publications
  • KNOXX INDUSTRIES AXIOM ULTRA-LIGHT RIFLE STOCK Highland Sport Is Offering a New Innovative Hi-Tech Polymer Recoil-Reducing Stock for Bolt-Action Rifles
    Test Report by Nick Harvey KNOXX INDUSTRIES AXIOM ULTRA-LIGHT RIFLE STOCK Highland Sport is offering a new innovative hi-tech polymer recoil-reducing stock for bolt-action rifles. The Axiom is a replacement for the traditional stock on the Howa 1500. BLACKHAWK! HAS WON a reputation for making high quality products for the U.S military and law enforcement agencies. These include military packs, ballistic vests, hydration systems, tactical holsters and special ops accessories among many other items. They also set out to woo hunters and shooters with a spin- off range of hunting packs, boots and other outdoor equipment. Best of all though, was the recoil reducing Knoxx CompStock which had a scientifically designed cam roller extension spring housed in the butt that compressed on firing so that the amount of felt recoil was substantially reduced. The reduction in recoil was claimed to be from 54 to 95 percent depending on the stock and the calibre. Blackhawk! also makes a SpecOps stock which is adjustable for length of pull and fitted with two recoil reducing systems; one in the pistol grip and one in the buttstock. Another Knoxx recoil solution was a traditional looking CompStock shotgun stock. The latest Knoxx recoil solution is the Axiom rifle stock, a Buck Rogerish-looking replacement for the traditional Howa 1500 stock. The durable, reinforced polymer forestock has aluminium pillar bedding and completely free-floated barrel. A rifle’s accuracy effectiveness or even its purpose isn’t dependent upon its looks, but just because a firearm has a black polymer stock with machinegun-style pistol grip doesn’t make it an assault weapon.
    [Show full text]
  • FIREARM Auctions Auction Facility… 401 S
    Auction Location: 1 mile east of down- town Nappanee, IN on US 6 to Oak- land Ave. (CR 7), then south to Hahn FIREARM AuctionS Auction Facility… 401 S. Oakland Ave. 2 SATURday, February 27, 2021 Nappanee, IN 46550 Start Time 9:00 a.m. RIFLES SHOTGUNS HANDGUNS Stevens “Visible Loader” Remington Nylon 66 Mohawk BP Fox Model B SBS 16 ga Remington 1858 New Model Army (1863- Hi-Standard H-D Military 22 Heavy Barrel Stevens “Marksman” Savage A17 17 HMR semi-auto w/scope Iver Johnson Champion 16 ga 1888) B.P. Hi-Standard H-D Military 22 Stevens Favorite Model 1915 W.W. Greener 45-70 Mark III Savage 220A 12 ga w/Cutts choke Rock Island M1911A1 GI Standard 38 Super Sharps Pepperbox Second Model 30 Cal Stevens Favorite Model 1915 Enfield 303 British Stevens 67 410 Pump Series E Springfield XD9 9mm Camo Short Interams Marx X Cavalier 30-06 (Mauser Weatherby Vanguard 270 Win Wood Stevens 94 16 ga Beretta 925 9mm Colt 1908 Vest Pocket 25 Auto MNF 1913, scope) Kimber 84M Longmaster Classic 308 w/ JC Higgins Model 20 12 ga (Power Pac) FNH Five Seven 5.7x28 2-tone Letter Marlin 882 SSV 22 mag w/scope scope Parker SBS 10 ga (1866) Sig Sauer SP2022 9mm Colt 1908 Vest Pocket 25 Auto MNF 1917 Golden Eagle 7000 300 WBY Mag 800 Howa 1500 w/scope 223 Bull Barrel Iver Johnson Champion 16 ga Smith & Wesson SW1911PD Pearl Grips, Letter (Leupold scope) ’76 Howa 1500 w/scope 22-250 Geha Mauser 98 12 ga Kel-Tec PMR 30 22 Mag Colt Army Special 32-20 Hi-Point Model 995 9mm CZ 455 Lux Combo (22 LR, 22 Mag, 17 Browning BT 99 34" Trap 12 ga Japan H&R Model 950 22 Revolver
    [Show full text]
  • Rog U E Va Ll E Y Re V I E W Or E Go N Hu N T E R S As S O C I a T I
    Protecting Oregon’s Wildlife, Habitat and Hunting Heritage R OG U E V A LL E Y R E V I E W O R E GO N H U N T E R S A S S O C I A T I O N Oregon Hunters Association, Rogue Valley Chapter May 1st, 2020 PO Box 1748 Medford, OR 97501 Volume 35; Issue #5 Membership Meeting: MAYBE May 14th, 2020; 6:00pm Speaker: TBD Eagle's Club 2000 Table Rock Road, Medford, OR Menu: TBD Changing Places: Volunteering to serve in a non-profit is not for the faint-of-heart. It requires a lot of discipline and determination for several reasons. It also requires a certain level of persistence because when the challenges and criticisms surface, the reaction can pretty easily dissolve into "What's the point of working this hard as a volunteer just to have people complaining all the time?" You will be tempted to give up and quit. And therein lies the challenge of volunteering. When you care enough about something that you're willing to do it for free, and do it while being roundly criticized, you will be empowered in a way you might not otherwise experienced before. It takes a lot to give without really expecting ANYTHING in return, but once you do, it's a pretty unique and special feeling. We would encourage anyone to try it. Beginning next month RVOHA will have a new Board. This new Board will be well-positioned to build on the progress of the last two years in driving RVOHA back into firmer alignment with its charter of Protecting Oregon's Wildlife, Habitat and Hunting Heritage.
    [Show full text]
  • Weaver Mounts Chart
    WEAVER MOUNTS CHART WEAVER Top Mount Ring Height Guide Dovetail Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Low 0.089 Thru 38mm 1" Low 0.150 Up to 40mm 1" Medium 0.169 Thru 40mm 1" Medium 0.270 Thru 50mm 1" High 0.332 Thru 44mm 1" High 0.400 Thru 56mm 1" X-High 0.560 Thru 50mm 1" X-High 0.520 Over 56mm 1" See-Thru 0.750 Thru 50mm 30mm Medium 0.320 Thru 56mm 30mm Low 0.288 Thru 33mm 30mm High 0.490 Over 56mm 30mm High 0.500 Thru 44mm 1" Medium .22 Rings 0.262 Thru 40mm 1" Tip-Off 0.250 Thru 36mm 1" High .22 Rings 0.392 Thru 44mm 1" Tip-Off See-Thru 0.750 Thru 50mm 1" X-High .22 Rings 0.512 Thru 50mm Note: Chart applies to Grand Slam, Sure Grip, Detachable, Quad Lock and Lever Lok 1" Medium Mod 77/22 & No 1 0.453 Thru 50mm Rings. 1" Medium Mod 77 Stepped Thru 50mm 1' High Mod 77 Stepped Thru 56mm Note: Chart applies to Dovetail Rings. Tactical Style Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Med .280" Thru 40mm 30MM High .490" Thru 44mm 1" High .400" Thru 44mm 30MM X-High .610" Thru 56mm 1" X-High .520" Thru 50mm 34MM Low 0.327 Thru 24mm 1" XX-High .640" Thru 56mm 34MM High .0.577" Thru 44mm 30MM Low .250" Thru 38mm 34MM XX-High 0.827" Thru 56mm 30MM Med .370" Thru 40mm ® SIDE GRAND SLAM® GRAND SLAM® WEAVER® ALUMINUM TOP MOUNT BASES MULTI-SLOT BASES STEEL LOCK COMPLETE WEAVER MOUNT SEE-THRU MOUNT MOUNT STEEL TOP MOUNT BASES DOVETAIL BASES APPLICATIONS CHART RINGS SYSTEMS NOTES STANDARD 2-PC BASES EXTENSION BASES 1-PC 1-PC 1-PC USE
    [Show full text]
  • 2011 Retail Catalog Target=" Blank">
    ® TM 2011 RETAIL CATALOG target="_blank"> href="http://www.acp-waffen.de" <a DEPARTMENT OF DEFENSE TRIFECTA AWARD WINNER FOR SUPPORTING OUR AMERICAN WARFIGHTER DEPARTMENT OF DEFENSE: FREEDOM AWARD Legacy Sports International made allowances for Mr. Cutler to work while he continued to rehabilitate after being discharged and Gene paid for Cutler’s family to relocate to Nevada from California. “Gene put me on the payroll before I even started working when I was still a patient at Walter Reed. When I finally started to work he gave me the keys to the building and told me to work around my injuries,” said Cutler. Mr. Cutler had a position created for him with Legacy Sports International by Gene Lumsden and it saved his life.target="_blank"> Cutler explained, “Who calls a hospital and hires a combat veteran with serious medical conditions and a head injury for no reason other than kindness; suicide is a real issue for us because a Warfighter without a mission is a dead Warfighter. I will be eternally grateful to Gene and Legacy Sports for giving me a mission in life after the military.” Legacy Sports International has also contributed more than $20,000 to the Wounded Warrior Project through the sale of a commemorative Wounded Warrior Project rifle Gene Lumsden, President and CEO of Legacy Sports International, was one of only and is currently doing the same with a 1911 Wounded Warrior fifteen employers in the country awarded the highest recognition in the nation given Project pistol. by the U.S. Government to employers for their support of their employees who serve in the National Guard and Reserve.
    " class="panel-rg color-a">[Show full text]
  • Thames Valley Guns Armourers Report
    Thames Valley Guns Armourers Report Introduction In late 2016 I decided to sell my .223 Mossberg MRP LC and replace it with another .223 calibre rifle. This was driven by the fact that I really liked the Canadian MDT HS3 chassis system and wanted a suitable rifle to fit it. The HS3 Chassis system is designed to accept the following rifles Remington 700, Remington 7, Howa 1500, Savage and the Tikka T3. The Howa and T3 were the only two rifles that interested me and after some research it was clear that both rifles were readily available in the UK. The Howa was available as a varmint, 1 in 9 twist, threaded muzzle, in blue but without a rail. However its greatest attraction was its price at a shade under £500 retail. The Tikka on the other hand was double that price and then some, was available as a super varmint, fitted with a rail, threaded, in stainless, 1 in 8 twist and had a superior stock. I have worked on a few Howa’s over the years, even owned one, they are good rifles, good quality, very good value for money and in recent years have been subject to various aftermarket kits. On then other hand the Tikka tends to be a hunting rifle, I have worked on the Tikka tactical when they first appeared but it never really appealed to me as the price was astronomical for what it was and whilst the Tikka is without doubt a quality rifle its hunting heritage meant that only few have crossed my work bench.
    [Show full text]
  • Gun Tests December 2019 22-250 Rifles
    RIFLE COMPARISON 22-250 Bolt-Action Rifles from Browning, Howa, and Bergara Can a good varmint rifle also serve as a low-recoil starter bigger- game rifle? We test a Howa Model 1500 Youth, a Bergara B-14 Hunter short rifle, and a Browning X-Bolt Micro Midas to find out. n the March 2018 edition of GUN TESTS, we of rifles for the test needed to as well. So, in this evaluated a Browning A-Bolt Micro Hunter in evaluation, we tested the Howa Model 1500 short 7mm-08. We gave that rifle two grades: the first action youth model, $529; a Bergara B-14 Hunter was an A- for adults and a C+ for youths. An short rifle, $825; and a Browning X-bolt Micro Midas, IA- is a good grade for a good firearm, but we also $880. The Browning X-Bolt Micros Midas has a short observed that it was “too much rifle and recoil for stock with additional spacers provided. The Howa younger shooters.” We wondered if we went to a can be purchased with a youth- or an adult-length smaller caliber in the same format rifle, could that stock (we got both), and the Bergara B-14 Hunter reach an A grade range for a youth shooter? In fact, comes with a traditional full-length stock. we wondered about doing that with a number of rifles chambered for the soft-shooting but very accurate The Round 22-250 Remington. The 22-250 Remington is essentially a 250 Savage Most parents, coaches, or instructors start young, case necked down to 22 caliber, with the early design small-statured, or recoil-sensitive shooters out with work going back to the 1930s.
    [Show full text]
  • Howa 1500/Weatherby Vanguard Long Action Magazine System CAUTION Custom Installation Instructions DO NOT EXCEED 55 IN-LBS
    7. Using a torque wrench, torque action bolts to 50 to 55 in-lbs. Howa 1500/Weatherby Vanguard Long Action Magazine System CAUTION Custom Installation Instructions DO NOT EXCEED 55 IN-LBS. OR DAMAGE TO THE TRIGGER GUARD MAY RESULT. The system has been designed to function without modi- fication on most injection molded polymer stocks. DAMAGE DUE TO OVER TORQUING WILL VOID THE WARRANTY 8. Check the position of the magazine in the action as shown in Wood stocks are made to different specifications with Figure 5 below. trigger guard to action distance and angle varying great- ly. In a standard internal magazine bolt action rifle this is • Magazine should be flush with the bolt slide area of the action of little concern. However, with a detachable, magazine to 1/32” (see arrow, below). fed, bolt action rifle the positioning of the trigger guard to the action is critical to function properly. •Magazine should be level with the bolt. The following outlines how to adjust the Howa 1500/ Weatherby Vanguard Long Action Mag. System to your particular firearm. Figure 5 Do not attempt to install this product on a loaded firearm! SERIOUS INJURY OR DEATH MAY OCCUR ® Detach Mag Install_Howa LA.indd 1 8/5/15 9:33 AM CAUTION 1. Measure the front and rear bedding pillars in the stock Do not attempt to install this product on a loaded firearm! Failure to follow these instructions may result in (see “A” and “B” in Figure 1). SERIOUS INJURY OR DEATH MAY RESULT unreliable operation and may damage the detach- 2.
    [Show full text]
  • 2008 Retail Catalog Celebrating 100 Years of Excellence
    OPTICS ™ 2008 RETAIL CATALOG Celebrating 100 Years of Excellence Howa Headquarters, Test Firing a Howa M-1500 Inspecting a Barrel Nagura, Japan in the QC Lab on the Production Line Rossi Headquarters, Sao Leopoldo-RS, Brazil Guns in production at the Rossi Headquarters. Hatsan Headquarters, Izmir,Turkey CNC Machinery at the Hatsan Factory Howa Machinery, Ltd. Founded in 1907, Howa Machinery, LTD is celebrating its self contained machining centers, street sweeping 100th year of operation. Originally established as Toyoda equipment and sound-proof windows for the commercial Loom Works, Howa manufactured and sold textile looms. building market. Howa’s diverse products serve Over the years, Howa moved into the manufacture of cast the automotive, computer, electrical, construction steel components, which then led to the manufacture of and firearms industries. Howa has long been a rifle a variety of machine parts. As Howa has grown, it now manufacturer, providing high quality firearms to the manufactures Machine Tool Transfer Lines (production Japanese military and police markets as well as the sport line equipment), Flexible Transfer Lines and Flexible shooting market, worldwide. Howa is ISO9001 certified Manufacturing Systems. In addition, Howa also makes across its many divisions and operations. Amadeo Rossi, S.A. Rossi was begun in Brazil in 1889 by Amadeo Rossi, the Puma Model 92, as well as primers for ammunition, an Italian immigrant. Originally a farm equipment from their large, 300,000 sq. ft. Sao Leopoldo factory. The manufacturer, A. Rossi, S.A. eventually moved into the Puma M-92 has enjoyed many years of success and good production of single barrel shotguns and then to rifles.
    [Show full text]
  • Instructions for Weatherby Vanguard / Howa 1500 / Ruger Hawkeye Pro-Series® Stocks with Pro-Center® Technology
    INSTRUCTIONS FOR WEATHERBY VANGUARD / HOWA 1500 / RUGER HAWKEYE PRO-SERIES® STOCKS WITH PRO-CENTER® TECHNOLOGY H-S Precision’s Pro-Series® Kevlar/carbon fiber stocks represent a new era in the production of high tech synthetic rifle stocks. Pro-Series® stocks are designed to last a lifetime with little or no maintenance. Located on each side of your new stock is a flat point set screw. They are used to stabilize and center the barreled action making the need for conventional epoxy bedding unnecessary, but optional. A 3/32” Allen Wrench and Blue Loctite #243 are included. DIRECTIONS FOR INSTALLATION 1. Before beginning installation of your new Pro-Series® stock, check your gun to make sure it is not loaded and remove the bolt assembly. 2. Remove the set screws from both sides of the stock using a 3/32” Allen Wrench. (See Figure 1) 3. Assemble the barreled action, magazine sleeve and trigger guard into the stock. Loosely install the action screws. 4. Push the barrel towards the right so it is touching the stock. (See Figure 2) Then, finger-tighten the action screws to hold it in-place. The set screw must be able to push the barreled action into correct position in the next step. 5. Apply Blue Loctite #243 to the first 5 to 7 threads on one of the set screws. DO NOT use a permanent setting thread locker. Install the set screw on the right side. Slowly turn the screw inward until the barrel becomes centered in the stock. (See Figure 3) It helps to have a good light source pointing directly at the barrel channel to prevent any shadowing.
    [Show full text]
  • WEATHERBY VANGUARD and HOWA 1500 TIMNEY
    WEATHERBY VANGUARD and HOWA 1500 Thank you for purchasing this Timney 5. Replace action in the stock. With some Trigger®, we have carefully designed, stocks it may be necessary to relieve machined, and calibrated this trigger some stock material in the area of to give you the optimum shooting the safety (A). If this is necessary, the experience. Please read these easiest way to do this is with a Dremel instructions fully before you install this tool or you can use a chisel. trigger. 6. Screw (1) is the trigger pull adjustment. 1. Unload rifle. Make certain chamber and The pull is pre-set at three pounds, magazine are empty before beginning turning the screw in (clockwise) will installation. Remove all screws holding make the pull weight heavier, turning the action in the stock. Remove action it out (counterclockwise) will make it from stock. Remove bolt. lighter. Do NOT reduce the trigger pull below 1.5 pounds. A very light weight of 2. Remove stock trigger by removing pull can cause slam fires. trigger mounting screw (4). Screw (2) is the sear engagement 3. Attach Timney Trigger® to the rifle adjustment. Sear engagement is pre- action with the trigger mounting screw set at the factory when the trigger is TIMNEY ADJUSTABLE TRIGGER GUARANTEE from the stock trigger, tighten the trigger tested and calibrated. It should not be mounting screw securely. The screw decreased below the pre-set amount. Material and workmanship: This TIMNEY trigger has been carefully inspected, tested and adjusted hole in the Timney Trigger® housing is to give a lifetime of dependable service.
    [Show full text]
  • Gunsmithing Program Required Guns
    GUNS REQUIRED FOR FIRST YEAR FALL SEMESTER Several guns (8 to 10 should be enough) of any type for Sight Installation, Recoil Pad and Sling Swivel Installation, Caustic Bluing, Parkerizing, and Alternative Metal Finishing. Long guns preferred. One case hardened receiver, such as an inexpensive single shot shotgun, for color case hardening. The receiver must be manufactured from mild steel for this process. SPRING SEMESTER One safety breeched rifle, such as a Remington 700, Howa 1500 or old Savage 110 (Remington is required for GSS 57.02 and meets the requirements for breeching as well, therefore it is preferred). One Flat Breeched rifle, such as a Mauser ’98, Push feed Winchester Model 70, or Ruger 77 (The Mauser is required for GSS 57.06 and will meet requirement for ‘Breeching’ as well, therefore the Mauser is preferred). One Cone Breeched rifle, such as a Springfield 03A3, Enfield P17, Pre 1964 Winchester Model 70 or Model 70 Classic. One semi- inlet composite stock for any of the above actions. One semi-inlet wood stock for any of the above actions. Three barrels for installation on above actions, one as a blank and two pre-contoured. GUNS REQUIRED FOR SECOND YEAR FALL SEMESTER A quality single action revolver with a steel frame, such as Colt SAA or clone (Uberti, Pietta, etc.), or Ruger SA (Colt clone preferred). A Smith and Wesson K,L, or N frame revolver. Ruger double action revolver At least two blow back autopistols, one rimfire and one centerfire One Colt 1911 or clone and one additional single action autopistol such as a Browning Hi-power At least three double action Autopistols: Smith and Wesson 39-59 series, Beretta 92, Glock, etc.
    [Show full text]