DOCSLIB.ORG

Download L180 Tape Library Operator's Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Download L180 Tape Library Operator's Guide PART NUMBER REVISION 95895 P L180 TAPE LIBRARY OPERATOR’S GUIDE PRODUCT TYPE HARDWARE L180 Tape Library Operator’s Guide Information contained in this publication is subject to change without notice. We welcome your feedback. Please contact the Global Learning Solutions Feedback System at: [email protected] or Global Learning Solutions Storage Technology Corporation One StorageTek Drive Louisville, CO 80028-3256 USA Please include the publication name, part number, and edition number in your correspondence if they are available. Export Destination Control Statement These commodities, technology or software were exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Limitations on Warranties and Liability Storage Technology Corporation cannot accept any responsibility for your use of the information in this document or for your use in any associated software program. You are responsible for backing up your data. You should be careful to ensure that your use of the information complies with all applicable laws, rules, and regulations of the jurisdictions in which it is used. Warning: No part or portion of this document may be reproduced in any manner or in any form without the written permission of Storage Technology Corporation. STORAGETEK MAKES NO WARRANTIES OF ANY KIND AND EXPRESSLY DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. STORAGETEK SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES RESULTING FROM USE OF THIS PUBLICATION OR ANY ASSOCIATED HARDWARE, SOFTWARE OR SPARE PARTS, INCLUDING LOSS OF DATA, EXCEPT FOR PERSONAL INJURY DIRECTLY CAUSED BY USE OF THIS PUBLICATION. Revision P (March 2006) This edition contains 214 pages. See “Summary of Changes” on page iii for the revision history and summary of changes made to this publication. © 1999, 2006 Storage Technology Corporation. All rights reserved. StorageTek and the StorageTek logo are trademarks or registered trademarks of Storage Technology Corporation. Other products and names mentioned herein are for identification purposes only and may be trademarks of their respective companies. ii Revision P 95895 Summary of Changes 1 EC Date Edition Description 111222 November 1999 First Initial release. 111426 March 2000 Second Refer to this edition for a description of the changes. 111569 November 2000 Third Refer to this edition for a description of the changes. 111640 April 2001 Fourth Refer to this edition for a description of the changes. 111680 September 2001 Fifth Refer to this edition for a description of the changes. 111721 March 2002 Sixth Refer to this edition for a description of the changes. 111752 May 2002 Seventh Refer to this edition for a description of the changes. 111810 December 2002 Eighth Refer to this edition for a description of the changes. 111829 February 2003 Ninth Refer to this edition for a description of the changes. 111893 April 2004 Tenth Refer to this edition for a description of the changes. 111949 January 2005 Eleventh Refer to this edition for a description of the changes. 111983 June 2005 N Refer to this edition for a description of the changes. 129919 March 2006 P Preface Added T10000 manuals to Tape Drive Documentation in “Related Publications.” Chapter 1 Revised “Tape Drives” and Table 1-2 to add T10000 information. Chapter 3 Revised first paragraph in “Drive Entries” to add “library” before “configuration.” Revised “Cleaning Cartridge Requirements,” Figure 3-1, and Table 3-2, to add T10000 information. Chapter 4 Added Figure 4-6, “Loading a Cartridge into a T10000 Drive,” Figure 4-19, “Unloading a Cartridge from a T10000 Drive” to add T10000 information. Revised Table 4-7 to add T10000 information. 95895 Revision P iii Summary of Changes EC Date Edition Description March 2006 P Appendix A (Continued) Revised “Colored Cartridge Specifications,” Table A-5 through Table A-7, and “T9x40 and T10000 Cartridge Environmental Specifications” to add T10000 information. Added Figure A-4, “Applying Cartridge Labels to T10000 Cartridges,” Figure A-9, “Setting the T10000 Write-protect Switch,” and Figure A-14 to add T10000 information. iv Revision P 95895 Contents Summary of Changes . iii Contents . v Figures . .xii Tables . xiv Preface . xv Organization . xv Alert Messages . .xvi Mensajes de alerta . .xvi Conventions . xvii Related Publications . .xviii Additional Information . .xix StorageTek’s External Web Site . .xix Customer Resource Center . .xix Partners Site . .xix Hardcopy Publications . .xix Safety . xxi L180 Door Interlock . .xxi Electrostatic Discharge Damage Prevention . .xxi Fiber-optic Safety . xxii Laser Product Label . xxii Fiber-optic Cable Installation . .xxiii Fiber-optic Cable Handling . .xxiii Rack Safety and Precautions . .xxiv Seguridad . xxvii Bloqueo de puerta L180 . xxvii Prevención de daños por descarga electrostática . xxvii Seguridad de fibras ópticas . .xxviii Etiqueta del producto láser . .xxviii Instalación de cables de fibra óptica . .xxix Manipulación de cables de fibra óptica . .xxix Seguridad y precauciones del bastidor . xxx Notices . xxxiii 95895 Revision P v Contents United States FCC Compliance Statement . .xxxiii CISPR 22 and EN55022 Warning . .xxxiii Japanese Compliance Statement . .xxxiv Taiwan Warning Label Statement . .xxxiv Internal Code License Statement . xxxv 1: General Information . .1-1 Tape Library Components . 1-1 Robot . 1-3 Hand-Camera Assembly . 1-5 Storage Cells . 1-6 Cell Locations . 1-6 Library Capacity . 1-6 Reserved Cells . 1-9 In-transit Cell . 1-9 Diagnostic/Cleaning Cells . 1-9 Cartridge Access Port . 1-10 Tape Drives . ..
Load more

Recommended publications
  • Tape Goes High Speed Tests Confirm Advantages of Combining Tape, Flash and Software- Defined Storage in a Single, Low-Cost Solution
    IBM Systems November 2016 Technical White Paper Tape goes high speed Tests confirm advantages of combining tape, flash and software- defined storage in a single, low-cost solution Forward-thinking IT architects have extolled for years the benefits of Highlights building an overall storage solution using only flash and tape storage media. Place active data on flash to accelerate storage performance and • Gain high performance, high capacity efficiency; move less-active data to tape to lower overall storage costs. and low-c ost storage all in one solution This storage architecture has informally been named “flape.” But until • Leverage the cost and capacity recently, implementing effective flape solutions has proved problematic. advantages of tape to build powerful analytics systems Software-defined storage (SDS) technologies, however, have changed the • Lower storage costs without losing flape equation. SDS capabilities such as those provided by members of capabilities or performance the IBM® Spectrum Storage™ family open up exciting new possibilities, enabling the deployment of easily managed high-performance, low-cost storage solutions using SDS components integrated with IBM tape and flash systems. A proof of concept of this innovative new flash, SDS and tape-based storage architecture was recently performed in the Ennovar Solution Reference Architecture laboratory at Wichita State University. Using IBM Spectrum Scale™ and IBM Spectrum Archive™ SDS components, an IBM DCS3860 solid-state drive (SSD) array and IBM tape systems with analytics application workloads provided by the National Institute for Aviation Research (NIAR), the Ennovar team demonstrated the advantages of the flape architecture while increasing analytics performance by an average of more than three times.
    [Show full text]
  • Charles Lindsey the Mechanical Differential Analyser Built by Metropolitan Vickers in 1935, to the Order of Prof
    Issue Number 51 Summer 2010 Computer Conservation Society Aims and objectives The Computer Conservation Society (CCS) is a co-operative venture between the British Computer Society (BCS), the Science Museum of London and the Museum of Science and Industry (MOSI) in Manchester. The CCS was constituted in September 1989 as a Specialist Group of the British Computer Society. It is thus covered by the Royal Charter and charitable status of the BCS. The aims of the CCS are: To promote the conservation of historic computers and to identify existing computers which may need to be archived in the future, To develop awareness of the importance of historic computers, To develop expertise in the conservation and restoration of historic computers, To represent the interests of Computer Conservation Society members with other bodies, To promote the study of historic computers, their use and the history of the computer industry, To publish information of relevance to these objectives for the information of Computer Conservation Society members and the wider public. Membership is open to anyone interested in computer conservation and the history of computing. The CCS is funded and supported by voluntary subscriptions from members, a grant from the BCS, fees from corporate membership, donations, and by the free use of the facilities of both museums. Some charges may be made for publications and attendance at seminars and conferences. There are a number of active Projects on specific computer restorations and early computer technologies and software.
    [Show full text]
  • LTO Tape Technologies: Economic Value Analysis
    White Paper Analyzing the Economic Value of LTO Tape for Long-term Data Retention By Jason Buffington, Senior Analyst – Data Protection, and Adam DeMattia, Research Analyst February 2016 This ESG White Paper was commissioned by the LTO Program and is distributed under license from ESG. © 2016 by The Enterprise Strategy Group, Inc. All Rights Reserved. White Paper: Analyzing the Economic Value of LTO Tape for Long-term Data Retention 2 Contents Introduction .................................................................................................................................................. 3 Executive Summary .................................................................................................................................................. 3 Market Overview ...................................................................................................................................................... 3 Excerpts of the ESG Lab Review on LTO Tape Technology ....................................................................................... 4 LTO Tape Technologies: Economic Value Analysis ....................................................................................... 5 Methodology ............................................................................................................................................................ 5 Economic Value Model Overview ............................................................................................................................. 5 Cost
    [Show full text]
  • Dell EMC ML3 Tape Library User's Guide
    Dell EMC ML3 Tape Library User's Guide Information in this document is subject to change without notice. Copyright © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Printed September 2020. ii Dell EMC ML3 Tape Library: User's Guide Read this FIRST Regulatory information • The library must be installed in a restricted area. • Only personnel with technical and product safety training should have access to the library. • The library must be properly installed in an office or industrial environment with shielded cables and adequate grounding of SAS interface and input power to comply with regulations and standards. • Models: 3555-L3A, 3555-E3A The system complies to all applicable safety standards to allow for shipments worldwide including the America's, European Union Member States, Middle East, and Asia. Minimum firmware levels for common library features Table 1. Minimum firmware levels for common library features Feature Minimum Firmware Levels Required LTO8 (HH/FH) Tape Drives Library Firmware must be at 1.1.1.0 or greater to support the LTO8 tape drives. Ensure that any host applications and device drivers are at the minimum level that is required to support LTO8 tape drives. Certain non-IBM LTO8 media requires minimum drive firmware J4D4. Contact your media supplier for details. LTO6 (HH/FH) and LTO7 (HH/FH) Tape Drives Library Firmware must be at 1.1.0.1-A00 or greater to support the LTO6 and LTO7 tape drives. Ensure that any host applications and device drivers are at the minimum level that is required to support LTO6 and LTO7 tape drives.
    [Show full text]
  • TAPE STORAGE It’S a New Game with New Rules
    Fred Moore, President Horison.com 2020 Technology Update Series TAPE STORAGE It’s a New Game with New Rules Modern tape storage has become the leading strategic and lowest-cost storage solution for massive amounts of archival and unstructured data. This bodes well for future tape growth as archival data is piling up much faster than it is being analyzed. Over the past decade, the magnetic tape industry has successfully re-architected itself delivering compelling technologies and functionality including cartridge capacity increases, vastly improved bit error rates yielding the highest reliability of any storage device, a media life of 30 years or more, and faster data transfer rates than any previous tape or HDD (Hard Disk Drive). Many of these innovations have resulted from technologies borrowed from the HDD industry and have been used in the development of both LTO (Linear Tape Open) and enterprise tape products. Additional tape functionality including LTFS, RAIT, RAO, TAOS, smart libraries and the Active Archive adds further value to the tape lineup. HDD technology advancement has slowed while progress for tape, SSD (Solid State Disk) and other semiconductor memories is steadily increasing. Fortunately, today’s tape technology is nothing like the tape of the past. For tape it’s clearly a new game with new rules! THE TAPE RENAISSANCE TRANSITIONED TO THE ERA OF MODERN TAPE Since the first tape drives appeared in the early 1950s, tape has • tape is cheaper ($/TB) to acquire than disk primarily served as a backup and archive device for disk data. • tape is less costly to own and operate (lower TCO) than Troublesome tape issues of the past including edge damage, disk by 5-8x stretch, tear, loading problems, and media alignment with older (now obsolete) tape formats such as DAT, DDS, DLT, and 8MM • tape is more reliable than disk by at least three orders of tape were successfully addressed.
    [Show full text]
  • Q8™ Tape Library Installation and Operations Manual
    Q8™ Tape Library Installation and Operations Manual Document No. 511012 Rev. 07-01-19 Q8 Tape Library Installation and Operations Manual Copyright © Copyright 2017, QUALSTAR. All rights reserved. This document and the information contained herein are the property of QUALSTAR. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the express written permission of QUALSTAR. Trademark Notices QUALSTAR makes no representation or guarantees with respect to the contents of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, QUALSTAR reserves the right to revise this publication without obligation of QUALSTAR to notify any person or organization of such revision or changes. Q8™ is a Trademark of Qualstar Corporation Revision History Date Issue Revision Author Description of changes 2017-10-23 Initial release 01 Kevin Yi 2018-01-15 02 Kevin Yi LTO-8 Added 2019-07-01 07-01-19 Kevin Yi Updated Address 511012 Rev. 07-01-19 ii Q8 Tape Library Installation and Operations Manual Contacting Qualstar Sales Qualstar Corporation 1267 Flynn Road Camarillo, CA 93012 Tel: 805-583-7744 877-886-2758 (Toll Free) Technical Support Available 7:00am – 4:00pm PST Tel: 805-416-7055 Technical Support after hours: Tel: 805-416-7055 For non-urgent questions, please use the form on our website at: http://www.qualstar.com/service-requests/ Product warranty caution The Q8 Tape Library contains no user-serviceable components.
    [Show full text]
  • L1200 LTO® 2U Tape Library
    Sell Sheet ENTERPRISE STRENGTH ® TAPE ARCHIVING L1200 LTO RIGHT-SIZED FOR SMBs 2U Tape Library Comprehensive capabilities and features don’t come at the cost of complexity; the High Capacity 2U Tape Library Imation L1200 LTO 2U Tape Library is designed for easy, intuitive installation and configuration, as well as more Small- and medium-sized businesses (SMBs) understand the flexible operation: importance of safeguarding their valuable information, but 6 GB/s Serial Attached SCSI many balk at the expense and headache of deploying a data (SAS) interface provides simple archive solution. Now Imation brings enterprise-strength connectivity to a wide variety of server hardware. tape archiving within reach. Made for Imation, manufactured by IBM®, the L1200 LTO 2U Tape Library is an affordable, Remote library management easy-to-use library system that’s right-sized for SMBs. through a standard Web interface provides flexibility, improved Utilizing Linear Tape-Open (LTO) technology, the leading open system tape administrative control over storage created by a consortium of leading storage producers including IBM, the operations. Imation L1200 LTO 2U Tape Library gives SMBs the flexibility they need to simultaneously manage rapid, unpredictable growth in digital content while AES 256-bit hardware-based encryption ensures information on still meeting strict industry regulations for retention, retrieval and recovery, and LTO-5 tape cartridges is secure; relaying of data. WORM (Write Once Read Many) LTO-5 and LTO-4 cartridges When equipped with LTO-5 tape drives, the Imation L1200 LTO 2U Tape Library prevent data from being deleted or delivers the highest LTO storage capacity (up to 1.5 TB native on each Imation altered.
    [Show full text]
  • Spectra Stack User Guide
    Spectra Stack Library User Guide SpectraLogic.com Copyright Copyright © 2018‐2021 Spectra Logic Corporation. All rights reserved. This item and the information contained herein are the property of Spectra Logic Corporation. Notices Except as expressly stated herein, Spectra Logic Corporation makes its products and associated documentation on an “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE EXPRESSLY DISCLAIMED. In no event shall Spectra Logic be liable for any loss of profits, loss of business, loss of use or data, interruption of business, or for indirect, special, incidental or consequential damages of any kind, even if Spectra Logic has been advised of the possibility of such damages arising from any defect or error. Information furnished in this manual is believed to be accurate and reliable. However, no responsibility is assumed by Spectra Logic for its use. Due to continuing research and development, Spectra Logic may revise this publication from time to time without notice, and reserves the right to change any product specification at any time without notice. Trademarks BlackPearl, BlueScale, CC, RioBroker, Spectra, SpectraGuard, Spectra Logic, StorCycle, TeraPack, TFinity, and TranScale are registered trademarks of Spectra Logic Corporation. Eon Protect and SeeVault are trademarks of Spectra Logic Corporation. MigrationPass is a service mark of Spectra Logic Corporation. All rights reserved worldwide. All other trademarks and registered trademarks are the property of their respective owners. Part Number 90970035 Revision E Revision History Revision Date Description A March 2018 Initial release.
    [Show full text]
  • ETERNUS LT230 Tape Library
    C144-E229-04EN Tape Library (LT23JFC1U, LT23JFE1U, LT23JLC1U) User's Guide FOR SAFE OPERATION This manual contains important information regarding the use and handling of this product. Read this manual thoroughly. Pay special attention to the section "FOR SAFE OPERATION" Use the product according to the instructions and information available in this manual. Keep this manual handy for further reference. Fujitsu makes every effort to prevent users and bystanders from being injured or damage to their property. Use the product according to this manual. ABOUT THIS PRODUCT This product is designed and manufactured for use in standard applications such as office work, personal devices and household appliances. This product is not intended for special uses (atomic controls, aeronautic or space systems, mass transport controls, medical devices for life support, or weapons firing controls) where particularly high reliability requirements exist, where the pertinent levels of safety are not guaranteed, or where a failure or operational error could threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use). Customers considering the use of these products for mission-critical applications must have safety-assurance measures in place beforehand. Moreover, they are requested to consult our sales representative before embarking on such specialized use. TRADEMARKS ACKNOWLEDGEMENTS - LTO, Liner Tape-Open and Ultrium are registered trademarks of Hewlett-Packard Development Company, L.P., IBM Corporation and Quantum Corporation. (the former Seagate Removable Storage Solutions). - Microsoft, Windows, MS, Windows 2000, and Windows Server 2003 are registered trademarks of Microsoft Corporation in the United States or certain other countries. - UNIX is a registered trademark of The Open Group in the United States and other countries.
    [Show full text]
  • Lecture 14: Automated Data Libraries & Networks & Interconnect
    Lecture 14: Automated Data Libraries & Networks & Interconnect—Introduction Professor David A. Patterson Computer Science 252 Fall 1996 DAP.F96 1 Review: RAID Techniques • Disk Mirroring, Shadowing 1 1 0 0 Each disk is fully duplicated onto its "shadow" 0 0 1 1 0 0 Logical write = two physical writes 0 0 1 1 100% capacity overhead 1 1 • Parity Data Bandwidth Array 1 1 1 0 0 1 0 0 0 0 0 1 Parity computed horizontally 1 0 1 1 0 1 0 0 Logically a single high data bw disk 0 1 0 0 1 0 1 1 1 1 1 0 • High I/O Rate Parity Array Interleaved parity blocks Independent reads and writes Logical write = 2 reads + 2 writes DAP.F96 2 Parity + Reed-Solomon codes Review: RAID RAID sales, “The Independent RAID Report” May/June 1994, p. 15 ([email protected], 510-938-7425) • 1993: $3.4 billion on 214,667 arrays (» $15,000 / RAID) • 1996 forecast: $11 billion • 1997 forecast: $13 billion on 837,155 units – Source: DISK/TREND, 5/94 (415-961-6209) DAP.F96 3 Summary: I/O Benchmarks • Scaling to track technological change • TPC: price performance as nomalizing configuration feature • Auditing to ensure no foul play • Througput with restricted response time is normal measure DAP.F96 4 Review: Storage System Issues • Historical Context of Storage I/O • Storage I/O Performance Measures • Secondary and Tertiary Storage Devices • A Little Queuing Theory • Processor Interface Issues • I/O & Memory Buses • RAID • ABCs of UNIX File Systems • I/O Benchmarks • Comparing UNIX File System Performance • Tertiary Storage Possbilities DAP.F96 5 Memory Hierarchies File Cost Access
    [Show full text]
  • Tape the Digital Curator of the Information Age
    Tape The Digital Curator of the Information Age Fred Moore, President Horison, Inc. www.horison.com Introduction Since the first successful drive first appeared in 1952, the magnetic tape industry continues to evolve. Markets are shifting as disk slowly encroaches on tape’s traditional backup/recovery market while tape is positioning itself to address the exploding tier 3 applications such as fixed content, compliance and archive. In recent years tape has been relegated to the mainframe and the middle to high end of the SMB (Small to Medium Business) markets with decreasing penetration below this level due to availability of small diameter disk drives and flash memory alternatives. StorageTek, acquired by Sun Microsystems in 2005 and again when Oracle acquired Sun Microsystems in 2010, was clearly an innovator and what set StorageTek apart were its market leading tape innovations. StorageTek introduced the Nearline automated tape library in 1988 using a new, circular robotic architecture for the first time. This bold move essentially saved the company as StorageTek found many new applications for tape beyond traditional backup and recovery. In 1998, IBM and StorageTek popularized the first Integrated VTL (Virtual Tape Library) solutions bringing a new, improved economic model to the mainframe tape industry. The Nearline library was the de-facto standard library for 15 years and many are still in operation today. Tape was seldom seen as an innovative technology, but these innovations often proved the exception to that rule and StorageTek and IBM consistently lead the industry in tape innovation. Tape Industry Overview Annual tape industry revenues worldwide total over $3B including all drives, robotic libraries and media compared to a $25B disk drive industry in 2009.
    [Show full text]
  • Dell EMC ML3 Tape Library
    Dell EMC ML3 Tape Library User's Guide Information in this document is subject to change without notice. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Printed December 2017 iii iv Dell EMC ML3 Tape Library: User's Guide Contents iii Installing .............. 33 Unpacking the Base Module and Expansion Figures .............. vii Modules ............... 34 Identifying Library Module components..... 39 Tables ............... ix Preparing top and bottom modules ...... 39 Installing modules in a rack ......... 42 Installing a tabletop module ......... 46 Read this first ............ xi Aligning and connecting modules ....... 46 Minimum firmware levels for common library Validating tape drive installation ....... 49 features ................ xi Connecting cables ............ 49 Contacting Dell ............. xii Powering on the library .......... 51 The Initial Setup process .......... 52 Safety and environmental notices ... xiii Initial configuration and customization ..... 53 Danger and Caution notices ........ xiii Labeling and loading tape cartridges ...... 53 Possible safety hazards .......... xvi Verifying the installation .......... 55 Class I laser product ........... xvi Advanced library configuration........ 55 Performing the safety inspection procedure ... xvii Overview .............. 56 Rack safety .............. xvii Library partitioning .......... 57 Power Cords.............
    [Show full text]