DOCSLIB.ORG

Technical Information

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Technical Information Subject Survey on lifeboat on-load release mechanisms (Lifeboat Release and Retrieval Systems: LRRSs) for ships flying Bahamian flag Technical Information No. TEC-0982 Date 6 February 2014 To whom it may concern With regard to survey on LRRSs, it had been notified by the Technical Information (No.: TEC-0966, Date: 3 October 2013), and the Bahamian Government's instructions have been given, which is summarized as flows of actions for ships flying Bahamian flag in the Attachment 1. Ships flying Bahamian flag are required to follow the flows. In the Case 1 and Case 2 of the flows, a copy of evaluation report by the Recognized Organization (the Attachment 2) of the LRRS type registered to IMO GISIS is acceptable to us, and the copy is supplied by the lifeboat maker or the service provider. IMO GISIS is web page (http://gisis.imo.org) that evaluation results of LRRS types are registered to. For any questions about the above, please contact: NIPPON KAIJI KYOKAI (ClassNK) Material and Equipment Department, Administration Center, Head Office Address: 4-7 Kioi-cho, Chiyoda-ku, Tokyo 102-8567, Japan Tel.: +81-3-5226-2020 Fax: +81-3-5226-2057 E-mail: [email protected] Attachment: 1. Flow of actions for the lifeboatVoid release and retrieval system to comply with SOLAS III/1.5 amended by MSC.317(89) 2. INFORMATION BULLETINE No. 03, The Bahamas Maritime Authority NOTES: ClassNK Technical Information is provided only for the purpose of supplying current information to its readers. ClassNK, its officers, employees and agents or sub-contractors do not warrant the accuracy of the information contained herein and are not liable for any loss, damage or expense sustained whatsoever by any person caused by use of or reliance on this information. Back numbers are available on ClassNK Internet Homepage (URL: www.classnk.or.jp). Attachment 1. to ClassNK Technical Information No.TEC-0982 1/3 FLOW OF ACTIONS FOR THE LIFEBOAT RELEASE AND RETRIEVAL SYSTEM TO COMPLY WITH SOLAS III/1.5 AMENDED BY MSC.317(89) Only for SHIPS FLYING BAHAMIAN FLAG Abbreviations: LB : Lifeboat LRRS : Lifeboat Release and Retrieval System Case 1 Case of LRRS complying with SOLAS III/1.5 amended by MSC.317(89) Actions Actions of of LB Maker or Ship Owner Service Provider Ordering LB Maker or Service Provider to check the LRRS according to MSC.1/Circ.1392 and MSC.1/Circ.1206/Rev.1 Actions Inspection on the LRRS according to of MSC.1/Circ.1206/Rev.1 NK Local as Survey Office “one-time follow-up overhaul examination” mentioned in MSC.1/Circ.1392 S ubmitting application of survey on the LRRS according to Receipt SOLAS III/20.11.2.3 of application from ship owner to NK local Survey Office Test of the LRRS according to SOLAS III/20.11.2.3: lifeboat 1.1 x load test Void Document 1 Statement according to MSC.1/Circ.1206/Rev.1 Document 2 Copy of evaluation report by the Recogunized Organization of the LRRS type registered to IMO GISIS End of actions 2/3 Case 2 Case of modification the LRRS to comply with SOLAS III/1.5 amended by MSC.317(89) Actions Actions of of LB Maker or Ship Owner Service Provider Ordering LB Maker or Service Provider to modify the LRRS according to MSC.1/Circ.1392 and MSC.1/Circ.1206/Rev.1 Modification of the existing LRRS Actions Inspection on the LRRS according to of MSC.1/Circ.1206/Rev.1 NK Local as Survey Office “one-time follow-up overhaul examination” mentioned in MSC.1/Circ.1392 Submitting application of survey on the LRRS according to Receipt SOLAS III/20.11.2.3 of application to NK local Survey Office from ship owner Test of the LRRS according to SOLAS III/20.11.2.3: lifeboat 1.1 x load test Document 1 Void Statement according to MSC.1/Circ.1206/Rev.1 Document 2 Copy of evaluation report by the Recogunized Organization of the LRRS type registered to IMO GISIS End of actions 3/3 Case 3 Case of replacement the LRRS to comply with LSA code amended by MSC.320(89) Actions Actions of of LB Maker or Ship Owner Service Provider Ordering LB Maker or Service Provider to replace the LRRS to comply with LSA code amended by MSC.320(89) Actions of NK Local Survey Office Submit ting application of survey Receipt on the LRRS according to of application MSC.1/Circ.1392 from ship owner to NK local Survey Office Replacement of LRRS Tests of the LRRS according to MSC.1/Circ.1392: (1) hook 2 x load test (2) lifeboat 1.1 x load test (3) 5 knots installation test (20,000GT or above) Void Test Report in the format of MSC.1/Circ.1392 APPENDIX 4 with signature of surveyor End of actions Attachment 2. to ClassNK Technical Information No.TEC-0982 Bulletin No. 03 Revision No. 03 Issue Date 20 Jan 2014 INFORMATION BULLETIN No. 03 Authorised Classification Societies - Recognised Organisations & Recognised Security Organisations Guidance for Bahamas Recognised Organisations, Bahamas Approved Nautical Inspectors, Ship Owners, Managers, Masters and Seafarers 1. Purpose 1.1. This bulletin details the organisations to which The Bahamas has entrusted survey, audit and certification under the provisions of the relevant regulations of the Conventions to which The Commonwealth of The Bahamas is a party. 2. Recognised Organisations & Recognised Security Organisations 2.1. The following ten (12) bodies have been authorised to carry out statutory survey, audit and certification of Bahamian ships and audit and certification of Companies operating Bahamian ships. American Bureau of Shipping (ABS) Bureau Veritas (BV) China Classification Society (CCS) Croatian Register of Shipping (CRS)1 Det Norske Veritas (DNV)2 Germanischer Lloyd (GL)2 Korean Register of ShippingVoid (KR) Lloyd’s Register (LR) Nippon Kaiji Kyokai (Class NK – NKK) Registro Italiano Navale (RINA) Russian Maritime Register of Shipping (RS) 1 From 01 February 2014 2 Existing agreements with Det Norske Veritas and Germanischer Lloyd will be combined in due course to reflect the merger of these two societies to create the DNV-GL Group (see BMA Technical Alert 13-06). B03 Rev.03 AUTHORISED CLASSIFICATION SOCIETIES Page 1 of 2 Contact: [email protected] +44 20 7562 1300 Bahamas Maritime Authority 3. Authorisation 3.1. The Bahamas has authorised the organisations listed above in accordance with IMO Assembly Resolution A.739(18) “Guidelines For The Authorization Of Organizations Acting On Behalf Of The Administration” and IMO Assembly Resolution A.789(19) “Specifications On The Survey And Certification Functions Of Recognized Organizations Acting On Behalf Of The Administration”. 3.2. The organisations are further authorised in accordance with Regulations 5.1.1.3 and 5.1.2 of the ILO Maritime Labour Convention, 2006. 3.3. The scope of authorisation of the nominated organisations is as found in the document, “The Bahamas National Requirements”, which is available on the Bahamas Maritime Authority (BMA) website: (www.bahamasmaritime.com). 3.4. Details of Recognised Organisations and Recognised Security Organisations authorised by The Bahamas have been submitted to ILO and IMO and are listed on the ILO NORMLEX and IMO GISIS systems respectively. 3.5. Any request for clarification regarding the scope or extent of authority of a Recognised Organisation to represent or act on behalf of The Bahamas should be made directly to the BMA Inspections & Surveys department at [email protected]. 4. Revision History Rev.3 (20 January 2014) – AdditionVoid of Croatian Register of Shipping Rev.2 (03 October 2013) – Complete revision Rev.1 (01 January 2008) – Complete revision B03 Rev.03 AUTHORISED CLASSIFICATION SOCIETIES Page 2 of 2 Contact: [email protected] +44 20 7562 1300 .
Load more

Recommended publications
  • 1972 Implementation, Testing, Inspection and Approval Note By
    INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR E Telephone: 020-7735 7611 Fax: 020-7587 3210 Telex: 23588 IMOLDN G IMO Ref. T3/1.01 CSC/Circ.119 13 December 2000 Original: ENGLISH INTERNATIONAL CONVENTION FOR SAFE CONTAINERS (CSC), 1972 Implementation, testing, inspection and approval Note by the Secretariat 1 The Secretary-General has received, in accordance with article IV(2) of the International Convention for Safe Containers (CSC), 1972, the information set out in the attached annex*. 2 This circular replaces the information provided in CSC/Circ.115, which is hereby revoked. 3 CSC Contracting Parties, which have not yet done so, are invited to submit similar information. 4 To keep the list as up to date as possible, Contracting Parties, which have previously submitted relevant information, are invited to review the list and notify the Secretary-General of any changes required. *** *Annex English only. I:\CIRC\CSC\119.doc CSC/Circ.119 ANNEX ORGANIZATIONS ENTRUSTED TO TEST, INSPECT AND APPROVE CONTAINERS ARGENTINA Implementation Prefectura Naval Argentina Direccion de Policia de Seguridad de la Navigacion Av. E. Madero 235 1106 Buenos Aires República Argentina Telephone: + 54 1 34 1812 Telefax: + 54 1 331 2876 Telex: 18581 PREFEC AR AUSTRALIA Implementation Chief Executive Australian Maritime Safety Authority P.O. Box 1108 Belconnen ACT 2616 Australia Telephone + 61 6 279 5000 Telefax: + 61 6 279 5866 Testing, inspection and approval American Bureau of Shipping Bureau Veritas Det norske Veritas Germanischer Lloyd Lloyd's Register of Shipping Nippon Kaiji Kentei Kyokai and Nippon Kaiji Kyokai I:\CIRC\CSC\119.doc CSC/Circ.119 ANNEX Page 2 BAHAMAS Testing, inspection and approval American Bureau of Shipping Forty-five Broad Street New York, NY 10004 United States of America Germanischer Lloyd P.O.
    [Show full text]
  • LNG AS SHIP FUEL No 01 2014
    LNG AS SHIP FUEL No 01 2014 THE FUTURE – TODAY LNG READY SERVICE ENGINES FOR GAS-FUELLED SHIPS RECOMMENDED PRACTICE ON BUNKERING GLOBAL LNG SOLUTIONS DNV GL Anzeige Safe Hands MARITIME PUT THE FUTURE OF YOUR FLEET IN SAFE HANDS As your classification partner, our extensive maritime vessels, benefitting your business and the maritime industry expertise, technical knowledge and regulatory foresight as a whole. With DNV GL your fleet is in safe hands. will help to ensure that your fleet meets the demands Can you afford anything else? of the future. Our aim is safety, compliance and optimal operational performance throughout the lifetime of your Learn more at dnvgl.com/maritime 2 LNG AS SHIP FUEL No. 01 2014 EDITORIAL In 2000 the first LNG-fuelled ferry based on DNV GL standards was launched. This ferry has been operating safely and successfully ever since. Over the years that have followed, shipping has seen bunker prices rise sharply and environmental regula- tions tighten, while in the LNG sector there has been a surge in production and deployment of infrastructure. Combined, these trends have set the stage for LNG to emerge as a viable fuel choice on a much larger scale. In 2014 the industry hit a significant milestone with over 120 LNG-fuelled ships in operation or on order worldwide. They range from passenger ferries, Coast Guard ships, containerships and Con-Ro vessels to Dr Gerd-Michael Wuersig tankers and platform supply vessels. The vast majority Business Director LNG-fuelled ships Senior Principal Specialist of these ships is in operation or will be built to DNV Business Development GL class, reflecting the trust our customers have in [email protected] our long involvement in this technology and our continually evolving technical expertise.
    [Show full text]
  • Safety Considerations and Approval Procedures for the Integration of Fuel Cells on Board of Ships
    SAFETY CONSIDERATIONS AND APPROVAL PROCEDURES FOR THE INTEGRATION OF FUEL CELLS ON BOARD OF SHIPS Vogler, F.1 and Dr. Würsig, G.2 1 Risk Assessment & Mechanical Engineering, Germanischer Lloyd AG, Vorsetzen 35, Hamburg, 20459, Germany, [email protected] 2 Risk Assessment & Mechanical Engineering, Germanischer Lloyd AG, Vorsetzen 35, Hamburg, 20459, Germany, [email protected] ABSTRACT The shipping industry is becoming increasingly visible on the global environmental agenda. Shipping's share of emissions to air is regarded to be significant and public concern lead to ongoing political pressure to reduce shipping emissions. International legislation at the IMO governing the reduction of SOx and NOx emissions from shipping is being enforced, and both the European Union and the USA are planning to introduce additional regional laws to reduce emissions. Therefore new approaches for more environmental friendly and energy efficient energy converter are under discussion. One possible solution will be the use of fuel cell systems for auxiliary power or main propulsion. The presentation summarizes the legal background in international shipping related to the use for gas as ship fuel and fuel cells. The focus of the presentation will be on the safety principles for the use of gas as fuel and fuel cells on board of ships and boats. The examples given show the successful integration of such systems on board of ships. Furthermore a short outlook will be given to the ongoing and planed projects for the use of fuel cells on board of ships. 1.0 EMISSIONS IN SHIPPING 1.1 Emission in Shipping Global warming, acidification and degradation of air quality are environmental impact categories high on the international agenda.
    [Show full text]
  • Role of Classification Society in Arctic Shipping
    ROLE OF CLASSIFICATION SOCIETY IN ARCTIC SHIPPING Seppo Liukkonen, Station Manager, DNVGL Station Helsinki Abstract The core mission of a classification society is “to protect human lives, property and the environment”. In first place the classification societies are fulfilling this function in marine environment, because the classification business in its current form started within sea transportation and shipping. Since then the function of the classification societies has widened to comprise shipbuilding, different kinds of off- shore activities and also some on-shore activities. When fulfilling their function the classification societies are using their own classification rules as their main, own tool. Additionally, the classification societies are often fulfilling their above-mentioned function by working together with and on behalf of the flag state administrations. Here the so-called IMO instruments such as the SOLAS and MARPOL conventions, for instance, are the main basis of the work. Also, international standards, such as the EN-ISO and IEC standards, for instance, and other national and international regulations, such as the Finnish-Swedish Ice Class Rules and Canadian Arctic Pollution Prevention Regulations, for instance, are used by the classification societies. Basically, the work of the classification societies is to ensure that the object in question, e.g., a ship, an off-shore structure, a quality management system, etc., is in compliance with the above-mentioned relevant rules and regulations. In practice this can be done, e.g., with plan approvals, supervision of manufacturing, surveys, inspections and audits. This presentation gives an overview about the role of the classification societies in ensuring and developing the safe Arctic shipping.
    [Show full text]
  • International Association of Classification Societies
    International Association of Classifi cation Societies Roy Nersesian and Subrina Mahmood I. Introduction Th e International Association of Classifi cation Societies (IACS), headquar- tered in London, is made up of ten classifi cation societies: Lloyds Register (LR), American Bureau of Shipping (ABS), Bureau Veritas (BV), China Clas- sifi cation Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Korean Register (KR), Nippon Kaiji Kyokai (NK), Registro Italiano Navale (RINA), and the Russian Maritime Register of Shipping (RS), as well as the Indian Register of Shipping (IRS) as an associate member. According to the Maritime International Secretariet Services (www.marisec.org), there are 47,700 vessels in the world trading fl eet made up principally of general cargo vessels, bulk carriers, container ships, tankers, and passenger vessels. If vessels smaller than 100 gross tons are included (too small to venture on the high seas or participate in international trade), the world fl eet numbers close to 100,000. Most of the world’s trading vessels – nearly 41,000 in 2008 – are registered with classifi cation society members of the IACS. Th e remaining vessels are covered by non-IASC member classifi cation societies. Classifi cation societies develop and implement technical standards for ships and fl oating off shore oil production and storage facilities. Th ese societies set rules to ensure the structural strength and integrity of the ship’s hull and its internal structure, cargo holds, bridge superstructure as well as the functional aspects and reliability of propulsion, steering systems, power generation, cargo handling, ship control, communication, navigation, emer- gency and other auxiliary systems.
    [Show full text]
  • Final Report European Maritime Safety Agency (EMSA) Study on Standards and Rules for Bunkering of Gas-Fuelled Ships
    Final report European Maritime Safety Agency (EMSA) Study on Standards and Rules for Bunkering of Gas-Fuelled Ships Final report European Maritime Safety Agency (EMSA) - Study on Standards and Rules for bunkering of gas-fuelled Ships Report No. 2012.005 Version 1.1/2013-02-15 Disclaimer The content of the report represents the views of Germanischer Lloyd only and should not be taken as indicative of the official view of the European Maritime Safety Agency, or of any other EU institution or Member State. Report No. CL-T-SM 2012.005 Date 2013-02-15 Contents 1 Executive Summary 7 2 Introduction 9 2.1 Objective 9 2.2 Methodological Approach 9 2.3 Limitations to the Study 10 3 Classification of the Bunkering Process 11 3.1 Overview of possible LNG Bunkering Operations 11 3.2 Elements of the LNG Supply for the LNG bunker operations identified 14 3.3 Categorisation of the relevant rule framework of possible LNG supply chains 16 4 Relevant Standardisation Bodies 18 4.1 International Bodies 18 4.1.1 International Maritime Organisation (IMO) 18 4.1.2 International Organisation for Standardisation (ISO) 19 4.1.3 International Electrotechnical Commission (IEC) 21 4.1.4 Society of International Gas Tanker & Terminal Operators (SIGTTO) 21 4.1.5 Oil Companies International Marine Forum (OCIMF) 22 4.1.6 Intergovernmental Organisation for International Carriage by Rail (OTIF) 22 4.2 European bodies 23 4.2.1 European Commission (EC) 23 4.2.2 European Committee for Standardisation (CEN) 24 4.2.3 United Nations Economic Commission for Europe (UNECE) 26 4.2.4
    [Show full text]
  • Detentionlist 01 2016
    SHORT GUIDANCE TO THE MONTHLY LIST OF DETENTIONS OF THE PARIS MOU • INFORMATION IN THE LIST The monthly list of detentions of the Paris MOU contains information about ships which were detained in the Paris MOU region during the month under review. An alphabetical index on ship’s name and an index on IMO number are provided with the list. The information listed for each ship is conform Annex 4 Publication of Information related to Detentions and Inspections. (As referred to in Section 5.2 of the Memorandum) http://www.parismou.org/Organization/2010.12.27/Memorandum_of_Understanding.htm Some of these items require an explanation: RO related deficiencies: a ‘Yes’ in this column indicates that one or more of the deficiencies mentioned under ‘Reasons for detention’ are the responsibility of the Recognized Organization which has issued the relevant certificate(s). This is not necessarily the Recognized Organization mentioned in the list (see below)! Port and date of release from detention: details of detentions are entered in the information system of the Paris MOU after the ship has been released. Therefore, the details on a detention of a ship detained in September but released in October are only available in October. Recognized Organization: the Recognized Organization mentioned is not necessarily the party issuing the certificates relevant for all deficiencies which were reasons for detention. ‘Ship allowed to sail to nearest repair yard for repairs’: in general, a ship is not released from detention before all necessary repairs have been made. However, sometimes it is not possible to repair all defects at the place of detention.
    [Show full text]
  • Shipping Made in Hamburg
    Shipping made in Hamburg The history of the Hapag-Lloyd AG THE HISTORY OF THE HAPAG-LLOYD AG Historical Context By the middle of the 19th Century the industrial revolution has caused the disap- pearance of many crafts in Europe, fewer and fewer workers are now required. In a first process of globalization transport links are developing at great speed. For the first time, railways are enabling even ordinary citizens to move their place of residen- ce, while the first steamships are being tested in overseas trades. A great wave of emigration to the United States is just starting. “Speak up! Why are you moving away?” asks the poet Ferdinand Freiligrath in the ballad “The emigrants” that became something of a hymn for a German national mo- vement. The answer is simple: Because they can no longer stand life at home. Until 1918, stress and political repression cause millions of Europeans, among them many Germans, especially, to make off for the New World to look for new opportunities, a new life. Germany is splintered into backward princedoms under absolute rule. Mass poverty prevails and the lower orders are emigrating in swarms. That suits the rulers only too well, since a ticket to America produces a solution to all social problems. Any troublemaker can be sent across the big pond. The residents of entire almshouses are collectively despatched on voyage. New York is soon complaining about hordes of German beggars. The dangers of emigration are just as unlimited as the hoped-for opportunities in the USA. Most of the emigrants are literally without any experience, have never left their place of birth, and before the paradise they dream of, comes a hell.
    [Show full text]
  • Evolution of Class
    Cover NOVEMBER MarPro:MTR May Cover V2.qxd 11/8/2011 11:16 AM Page 1 Maritime Professional 4Q 2011 www.MaritimeProfessional.com Evolution of Class AS CLASS DEVELOPS TO SERVICE AN EVER-CHANGING MARITIME INDUSTRY, EVEN DARWIN WOULD BE PROUD MP#1 C2 C3 & C4:MN#5 C2 C3 & C4.qxd 2/23/2011 4:51 PM Page 1 MP #4 (1-17):MP Layouts 11/9/2011 9:12 AM Page 1 MP #4 (1-17):MP Layouts 11/9/2011 9:17 AM Page 2 4th Quarter 2011 Maritime Volume 1 Number 4 Professional 4Q 2011 www.MaritimeProfessional.com 30 The Evolution of Class Modern class: Defined by change; Shaped by Competence. By Greg Trauthwein Plus “Class Insights” • DNV (p. 38) • Lloyd’s Register (p. 41) • ClassNK (p. 44) • RINA (p. 47) 14 Rising from the Ashes ... of Virtual Shipbuilding ... American Phoenix is not your father’s Jones Act product carrier. By Robert Kunkel 18 ABS Nautical Systems Karen Hughey, the President and COO of ABS Nautical Systems discusses “Class of the Future” via the NS5 Enterprise suite of software solutions. By Greg Trauthwein 26 Modern Ship Registry Bill Gallagher, President, International Registries, Inc. (IRI) helps to raises the bar on safety and compliance. By Joseph Keefe 50 Best Designs BWT Platform Presents Unique Challenges for Naval Architects. By Joseph Keefe ON THE COVER Charles Darwin probably had ocean commerce in mind when he thought up the concept of “survival of the fittest.” Even he probably couldn’t envision what today’s modern classification societies have evolved to become.
    [Show full text]
  • “Class“ Related Terms, Abbreviations and Acronyms
    023 – January 2007 Glossary of “Class“ related terms, abbreviations and acronyms Acceptance Criteria Assess The set of values or criteria which a design, To determine the degree of conformity of a design, product, service or process is required to conform product, service, process, system or organisation with in order to be accepted. with identified specifications, rules, standards or other normative documents. AIC Acceptance into Class The process by which unclassed vessels – Audit including vessels which are classed by a non-IACS A planned systematic and independent examination member or associate – can gain classification from to determine that the activities relative to a process an IACS member. Formal submission of plans and are documented, that these activities are actually information for design appraisal will usually be performed in conformance with what is stated in required in addition to a full survey. the documentation and that they are properly recorded and such as to reach contemplated Annual Survey objectives see Periodic Surveys CAP Condition Assessment Program Appraisal Structural assessment program devised by the A synonym for assessment, evaluation, verification classification societies ABS, LR and DNV. and review sometimes also for approval. Certificate Approval A formal document attesting compliance of a The examination and acceptance by the Society design, product, service or process with the of documents, products, procedures, services and specified requirements. other items related to classification and statutory certification, verifying solely their compliance Certificate of Registry with the relevant rules requirements, or other A document specifying the nation registry of the applicable referentials. vessel. Approved Type Certification Product representative of continuous production Certification and auditing are recognised as a to which it is granted permission for use based valuable approach to ensure reliable delivery of upon a satisfactory appraisal.
    [Show full text]
  • Power Quality Solutions for a Technology-Dependent Maritime World
    Safe and managed electric power - more important UPS Technology for the maritime world GE Consumer & Industrial than ever before GE is a leader in the field of critical power Power Protection protection. It’s UPS business designs, manufactures and delivers premium power quality products and related software solutions. - ship operation equipment These products ensure that organizations all over the world enjoy a safe and managed power - navigation equipment supply. - telecommunication To learn more about what we can do to - safety facilities protect your maritime equipment against the consequences of power failures, visit our website - cargo handling systems www.gedigitalenergy.com or use the reply fax. - computer networks - entertainment facilities - electronic point of sale equipment Power quality solutions for - security systems - emergency systems a technology-dependent - specialized machinery - ... maritime world manufacturer: GE Consumer & Industrial SA Via Cantonale 50 ... for all possible situations arising on board of a 6595 Riazzino (Locarno) Switzerland modern vessel, the uninterrupted availability of high T +41 (0) 91 850 51 51 F +41 (0) 91 850 51 44 quality electricity has become vital for a safe and E [email protected] profitable journey. Visit us online at: www.gedigitalenergy.com reply fax +41 (0)91 850 51 44 I am interested in more information Name / first name: about UPS equipment, please send me relevant documentation. Street: I am interested in a “custom made” Postal code / City: UPS-solution, please contact me. Country: No thanks, at the moment I’m not interested, but please Telephone: keep me informed about future developments. E-mail: System to be protected: GE imagination at work © General Electric Company, USA All Rights Reserved (04/06) English Reproduction only upon written consent by GE GEA-D 1035 GB Power quality solutions for a technology-dependent maritime world The maritime industry is growing.
    [Show full text]
  • 2007 Port State Control Report Australia
    2007 PORT STATE CONTROL REPORT Darwin Cairns Port Hedland Karratha Mackay Gladstone Brisbane Fremantle Newcastle Adelaide Sydney Canberra Wollongong Melbourne Devonport Australia I ©Australian Maritime Safety Authority This work is copyright. It may be reproduced in whole or part subject to the inclusion of an acknowledgment of the source, but not for commercial usage or sale. Further information may be obtained from: The General Manager Maritime Operations Australian Maritime Safety Authority GPO Box 2181, Canberra ACT 2601, AUSTRALIA Telephone +61 2 6279 5069 Facsimile +61 2 6279 5071 This Report and AMSA detention data is available on the Shipping Safety pages of AMSA’s website www.amsa.gov.au ISSN 1033-2499 Copy/design/typeset: Australian Maritime Safety Authority II 2007 Port State Control Report PREFACE The Australian economy depends upon maritime trade. It is reasonable to expect that those in the industry will maintain the safety of personnel and protection of the marine environment in accordance with Australian and international standards. The Australian Maritime Safety Authority (AMSA) assists in ensuring these expectations are met through continuing to deliver a rigorous port State control (PSC) program, supported by the Australian government and other maritime industry stakeholders. AMSA has been able to see the benefits of this program through analysis of PSC data over a number of years, with a clear improvement in the overall standard of foreign flag ships and a general decline in average deficiencies per PSC inspection. We recognise that this is only partly a result of the efforts and professionalism of the AMSA Marine Surveyors, systems and support staff; the efforts of the users of shipping coming to Australian ports to employ quality tonnage are also to be applauded as are the efforts of ship crews and managers.
    [Show full text]