READING TIP when browsing through this catalogue it is easier using two-up view (viewing the left & right side next to each other)!

FOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso.

The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means. You are permitted to print the pages for personal use only.

Quality Parts & Service MGC 1967-1969 PARTS & ACCESSORIES CATALOGUE

Fourth Edition • 190.158 Quality Parts & Service MGC 1967-1969 PARTS & ACCESSORIES CATALOGUE fill your customer number in for easy ordering

www.angloparts.com please visit our website for all contact information

Anglo Parts Shops MAIN BRANCH BELGIUM NETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts Dealers FRANCE • NETHERLANDS • SPAIN SWEDEN • FINLAND • SWITZERLAND CZECH REPUBLIC • SLOVAKIA LUXEMBOURG • POLAND • HUNGARY

All Rights reserved. No part of this publication may be reproduced or absorbed in any catalogue or information system by any means, Mechanical, photographic, electronic or otherwise, without prior express written consent of Anglo-Parts n.v.

Fourth Edition • 190.158 • Updated December 2007 • © Anglo Parts nv 2007 Important information

IMPORTANT POINTS The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed all previous. Please read below, the most important points. OUR SALESMEN We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you use the books listed in this catalogue. OUR CATALOGUES/WEBSITE We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied may vary from illustrations and photo’s, but will function the same way with similar quality.

OUR PART NUMBERS & PRICES All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required can vary from application to application. USE - the part number has been replaced by an other part number indicated.

ORDERS Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch. For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM. - Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscal (for Italian customers only) or VAT number for European companies. - Specify if shipping address is different. - CAR TYPE INFORMATION, make, model, year build etc. - Provide Anglo Parts PART NUMBERS only. - Indicate the quantity desired and parts description. - Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank. - Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you for your understanding. PAYMENTS CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number (mostly 16 figures), expiring date and name as appears on the card. BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice (Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.

SHIPMENT NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used. INTERNATIONAL: We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted. Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.

RECEIVING YOUR GOODS For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you actually need them and report problems within three days of receiving the goods.

WARRANTY Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.

RETURNS If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do not refund the value of credit notes. SURCHARGE - CORE DEPOSITS A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system. In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.

BACK ORDERS Goods which are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take this part in used condition, please ask us and we will do our best to obtain it, if possible.

© Van Gestel B&C 2005 1 Belangrijke informatie

BELANGRIJKE PUNTEN De verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.

ONZE VERKOPERS We zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken uit de lijst in de katalogus aan. ONZE KATALOGI Geen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.

ONZE ONDERDEELNUMMERS EN PRIJZEN Alle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagt kan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W. vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162 voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant. A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.

BESTELLINGEN U kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt: - uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven; - specifieer als het leveringsadres verschilt; - informatie over de auto, merk, model, bouwjaar, enz.; - gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken; - geef het aantal stukken aan en beschrijf de onderdelen; - duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD. - Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.

BETALINGEN Kredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD. Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden. Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)

VERZENDING Nationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt. Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper. ONTVANGST VAN DE GOEDEREN Gelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.

DE WAARBORG Bijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing. De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald, zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.

TERUGZENDEN Wanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers, zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.

SUPPLEMENT Een supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen. Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen. Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van de krukas terugbetalen. BACK ORDERS De goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.

2 © Van Gestel B&C 2005 Informations importantes

Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.

LES POINTS IMPORTANTS Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous, vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes. Vieillez lire les points les plus importants, mentionnés ci-dessous. NOS VENDEURS Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider. Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.

NOS CATALOGUES Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.

NOS NUMEROS DE PIECE ET LES PRIX Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix. Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates. L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le numéro de pièce a été remplacé par le numéro indiqué.

LES COMMANDES Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande: - votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises; - spécifiez si l’adress de livraison est différente; - informations sur la voiture: la marque, le modèle, l’année de construction, etc.; - utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement; - donnez le nombre des pièces et décrivez les; - indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur. Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.

LES PAIEMENTS La carte de crédit: Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte. La Banque: Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)

L’EXPEDITION National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit. International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur. LA RECEPTION DES PRODUITS Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur. Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.

LA GARANTIE Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris en considération de vérification. LA REEXPEDITION Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.

LE SUPPLEMENT Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité, est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).

LES “BACK ORDERS” Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.

© Van Gestel B&C 2005 3 Wichtige Auskünfte

1. EINFÜHRUNG Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster Stelle stehen sollten. 2. ALLGEMEINE GESCHÄFTSBEDINGUNGEN Wir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind. Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese. Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf die Verträge. 3. TECHNIK Für technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen, diese dienen lediglich der Darstellung unserer Waren. 4. KATALOG Wir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen als solche bezeichnet werden. 5. ERSATZTEILNUMMERN UND PREISE Alle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert, und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.

6. AUFTRAGSERTEILUNG Sie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre Kunden- Nummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich). - Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht. - Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw. - Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden. - Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an. - Geben Sie die Art der Zahlungsweise an. - Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.

7. ZAHLUNGSWEISE Sobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.

8. VERSENDUNG Da der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware, die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden. Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.

9. RÜCKSENDUNGEN Wenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe, Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.

10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASIS Für Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten. Insoweit führen wir eine Schätzung durch. 11. NACHLIEFERUNGEN Waren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.

4 © Van Gestel B&C 2005 Allgemeine Verkaufs- und Lieferbedingungen

Allgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar

1. Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im Einzelfall nicht ausdrücklich widersprochen wurde.

2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”). Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden, nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)

3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren Verzugsschadens bleibt vorbehalten.

4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns geltend zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nachbesserung bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Überprüfung etwa gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis vorliegt. Nach endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden aus sportlichen Einsätzen.

5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.

6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen) unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.

7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.

8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.

9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.

10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine Anwendung.

11 Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.

12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.

© Van Gestel B&C 2005 5 Informazioni importante

INFORMAZIONI IMPORTANTI Le condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.

I NOSTRI VENDITORI Non sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.

I CATALOGHI Ci impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso. Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime. La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata. I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa. Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come: SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile. LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione). USE: il numero di articolo è stato sostituito dal numero indicato. ORDINI Accettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue: - indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte; - specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione; - completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc. - usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine. - indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi. - indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.

PAGAMENTI Carta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre, la scadenza, il badge code ed il nome del “titolare” della carta. Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso, sarà nostra premura spedire il materiale non appena arrivato il pagamento. Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.

SPEDIZIONE Effettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura, essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.

RICEVIMENTO DELLA MERCE Siete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale: firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto. Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.

GARANZIA Anglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di 7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.

RISPEDIZIONE Accettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro). Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.

SUPPLEMENTO Alcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio. Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico vostro. BACKORDERS / ORDINI ARRETRATI I prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede, provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.

6 © Van Gestel B&C 2005 How to read and use the part number lists

GB ILL n°. Part n°. QTY DESCRIPTION illustration number Part number Quantity required Part description

Illustration number Part number Necessary quantity: Part description Exceptions: If a part has no Exceptions: A part number ATTENTION: indicated here is the With dimensions of screws, bolts, cables, etc. illustration number it is because may be missing if the part quantity of units necessary and not the Information about carburetters, electricity etc., there are several kinds of the part is no longer obtainable or in quantity of units which are supplied per details about books giving more information in question. production. order/delivery. about the part itself: original, reproduction, e.g. Left and right hand Our parts are sold per unit. reconditioned, etc. door panel. NL Illustratie nummer Onderdeelnummer Nodige Hoeveelheid Onderdeel beschrijving Uitzonderingen: Een onderdeel Uitzonderingen: Een onderdeel- LET OP: Hier wordt de hoeveelheid Met maten van schroeven, bouten, kabels enz. heeft geen Illustratie nr. omdat nummer kan onbreken stuks die nodig zijn vermeld en niet de Informatie over carburateurs, elektriciteit enz. er meerdere soorten van het waarneer dit stuk niet meer te hoeveelheid stuks die worden geleverd Details over boeken die meer informatie geven. bestaande stuk zijn. verkrijgen of in produktie is. bij bestellingen. Onze onderdelen Informatie over het onderdeel zelf: origineel, vb. Links en rechts deurpaneel worden verkocht per stuk. reproduktie, gerestaureerd enz. F Numéro illustration Numéro de la pièce Quantité nécessaire: Description de la pièce: Exceptions: Si une pièce détachée Exceptions: Si ce numéro n’est ATTENTION: Sous cette rubrique, Comporte les dimensions des vis, écrous, câbles ne comporte pas de numéro pas indiqué, c’est parce que on mentionne la quantité de pièces etc. Des reseignements au sujet de carburateurs, d’illustration, c’est que la pièce cette pièce n’estplus disponible qu’il faut et non la quantité de pièces électricité etc., des détails concernant des livres existe en plusieurs versions. ou qu’elle n’est plus en livrées lors de la commande. Nos pièces informatifs. Des renseignements au sujet de Exemple: Panneau de production. détachées se vendent à l’unité. la pièce même: pièce d’origine, reproduction, porte gauche - droite. pièce révisée etc. D Abbildungsnummer: Nummer des Ersatzteils: Benötigte Menge: Beschreibung des Ersatzteils Ausnahmefall: Wenn ein Einzelteil Ausnahmefall: Mangelt diese Achtung! Unter diesem Titel wird Betrifft die Abmessungen der Schrauben, keine Abbildungs-nummer hat, Nummer, dann ist dieser die Menge der benötigten Einzelteile Mutter, Kabel, usw.; Auskünfte über Vergaser, ist das, weil der Einzelteil in Einzelteil nicht mehr verfügbar angegeben, sondern nicht die Menge Elektrizität, usw. Einzelheiten über Info- mehreren Fassungen besteht. oder wird er nicht mehr der bei Bestellungen gelieferten Bücher, Auskünfte über den Einzelteil selbst: Beispiel: Linke - rechte hergestellt. Einzelteile. Unsere Einzelteile werden Originaleinzelteil, Reproduction, überholter Türfläche. stückweise verkauft. Einzelteil usw. I Numero illustrazione in produzione. al pezzo. Eccezioni: Un componente non Numero componente Quantità necessaria Descrizioni componenti ha un numero illustrazione Eccezioni: Può succedere che AVVERTENZA: La quantità di pezzi Con misure di vite, bulloni, cavi ecc. Informazione perchè ci sono vari tipi del pezzo non c’è un numero componente necessari è data, e non la quantità di su carburatori, elettricità ecc. dettagli su libri che esistente. quando il pezzo non è più pezzi consegnati dopo ordinazioni. I danno ulteriore informazione. Informazione P. es. Pannello porta destro e disponibile o quando non è più nostri componenti vengono venduti sul componente stesso: originale, riproduzione, sinistro. revisionato ecc.

© Van Gestel B&C 2005 7 Wire wheel balancing

GB D How to balance centre Das Auswuchten von Speichen- lock wire wheels rädern mit zentral Verschluss.

The diagrams show the centre spline of a wire Die abbildungen zeigen die Nabe eines ZV-Speichen- wheel attatched to a balancer. rades auf einer Auswuchtmaschine montiert. Diagram A is the correct method of locating Abbildung A: Die richtige Montage. (Nabenteller berührungsfrei, außen sitzender Außenkonus ) . the wheel. Abbildung B: Hier ist die Nabe falsch montiert! Diagram B shows the wrong method. (1) Außen übergreifender Wuchtkonus (1) Balancer lock nut (2) Speicherad-Nabe (2) Splined hub (3) Innenkonus mit Distanzstück “i” (3) Sprung cone (4) Anlageplatte der Wuchtmaschine (4) Mounting face of balancer (5) Hier über Original-Außenkonus spannen (5) Locate only at these external points (6) Hier über Original-Innenkonus spannen (6) Locate only at these points (7) Nicht über Innenkonus führen (7) Do not locate at these internal points (8) Der Nabenteller darf die Anlageplatte nicht berühen! (8) Do not locate at these points (9) Distanzstück, zur Verhinderung von Punkt “H” (9) Inner cone with distance piece Überprüfungspunkte: (Hinweise) POINTS TO CHECK der ursprünglich gute Rundlauf eines Rades kann sowohl durch The original high degree of balance may be affected by eine Beschädigung des Rades als auch durch unleichmäßige wheel damage as well as by factors related to the tyres Reifenabnutzung, Schlauchreparaturen oder ungenau gefertigte uneven tread wear, cover or tube repairs etc. If roughness Neureifen etc. beeinträchtigt werden. Wenn vibrationen auftreten, or high speed steering trouble develop, and this cause is deren Ursache nicht zweifelsfrei in der Mechanik liegen, solte das not disclosed by mechanical investigation, then the complete komplette Rad mit reifen ausgewuchtet werden. tyre and wheel assembly should be checked for balance. Es ist absolut unumgänglich, dab die Râder auf der It is IMPERITIVE that the hubs are located on the balancing Wuchtmaschine genauso gespannt werden wie am Wagen selbst. machine in exactly the same manner as located on the Bei Bedarf sind die erforderlichen Spannwerkzeuge über MWS car and the factory truing jigs. Alternatively, balance on zu bezichen. Alternativ ist es möglich, die Räder elektronisch the vehicle, this operation can only be done on the front am Wagen zu wuchten, was jedoch nur an nicht angetriebenen wheels of your car. Achsen möglich ist.

F NL I COMMENT EQUILIBRER Het uitbalanceren van een COME BILANCIARE DES ROUES A RAYONS “centre lock” spaakvelg RUOTE A RAGGI Le dessin montre le moyeu d’une roue fixée Illustraties: Il disegno mostra il mozzo d’una ruota sur une équilibreuse. SCHEMA A fissata su una macchina da bilanciare. LE SCHEMA A Dit is de juiste wijze van balanceren. LO SCHEMA A indica il metodo corretto indique la méthode de fixation correcte. SCHEMA B di fissare una ruota. LE SCHEMA B Op deze foute wijze krijgt men afwijkende LO SCHEMA B indique une fixation incorrecte. meet gegevens. mostra il metodo scorretto ! (1) Equilibreuse, écrou de vérouillage (1) Balanceer moer (1) Un dado di fermo (2) Moyeux (2) Spaakvelg (2) Mozzo (3) Cone ressort (3) Binnencone met afstandstuk (4) Montage Avant de l’équilibreuse (4) Montage plaat van balanceer apparaat (3) Pezzo conico sporgente (5) Placer seulement sur ces points exterieurs (5) Centreren op deze binnenste punten (4) Disco di montaggio della macchina da bilanciare (6) Placer seulement sur ces points (6) Op deze punten centreren (5) Mettere soltanto sui punti esteriori (7) Ne pas placer sur ces points interieurs (7) Niet centreren op deze binnenste punten (6) Mettere soltanto su questi punti (8) Ne pas placer sur ces points (8) Niet op deze punten centreren (7) Non mettere su questi punti interiori (9) ecartement afin d’éviter le contact sur point (9) Binnencone met afstandstuk (8) Non mettere su questi punti (9) Separazione per evitare il contatto con il punto LES POINTS A OBSERVER ET VERIFIER: Belangerijk is de wijze waarop de spaakvelg op het La précision de l’équilibrage peut être affectée par une jante balanceer apparaat opgespannen wordt. La precisione del bilanciare diventa meno sicura a causa détériorée aussi bien que par des pneus usés ou des tubeless Zie illustratie A en B. di un cerchione danneggiato, di pneumatici usati o di reparés, etc. Si la direction devient dure ou représente des troubles à grande vitesse, et, où après verification, la cause gomme riparate, etc. Se la conduzione diventa difficile o In verband met de garantie wordt aanbevolen de spaakvelg presenta dei problemi a grande velocità e, doppo la verifica n’est pas mécanique, il convient de verifier l’équilibrage de zonder band op het balanceer apparaat op te spannen la roue. mecanica, la causa non è questa, è necessario verificare en na te zien of de velg in balans is. De afwijking wordt il bilanciare della ruota. È necessario rispettare lo schema IL EST IMPERATIF de respecter le schema A lors de gemeten vanaf de rand waar de band tegen komt te liggen A durante l’instalazione sulla macchina da bilanciare. Si l’installation sur l’équilibreuse. On peut aussi équilibrer les met maximaal 2 millimeter afwijking. Als deze afwijking può bilanciare soltanto le ruote anteriori sulla macchina, roues avants seulement sur le vehicule, à l’aide d’un appareil minder is, dan kan de band op de spaakvelg gemonteerd adapte. Pour tous renseignements complementaires n’hésitez worden en het geheel uitgebalanceerd worden. per mettere di un apparecchio adatto. pas à contacter

8 © Van Gestel B&C 2005 Index

A D continued I S continued Accelerator cable 16 Door fittings 68-71 Identification plates 92 Silicone spray 52 Air filter 10, 22 Door glass 70 Inlet manifold 17 Sill 65 Air intake grill 20, 66 Door handle 68 Slave cylinder 36 Alloy wheel 91 Door hinge 68 J Spark plug 10 Alternator 54 Door seal finishers 68 Jack 52 Speedometer cable 56-58 Aluminium rocker cover 14 Door seal 79 Spot lamp 63 Angle drive 58 Door steps 79 K Starter motor 54 Anti-freeze 19 K&N air filter 22 Starter motor, modern type 87 Ash tray 78 E Kenlowe fan kit 88 Steering column 47 ATF oil 32, 91 Emission control 18 King pin set 35 Steering lock 47 Automatic transmission 21 Engine mountings 16 Steering rack 48 Engine paint 10 L Steering wheel 47 B Engine parts 11 Lead kit 10 Steering wheel, Moto-Lita 90 Badge clamp 71 Exhaust manifold 17 Letterset 66 Stickers 92 Battery cable 60 Exhaust system 17 Lights and lamps 60 Stop light switch 42 Battery 54 Expansion tank 19 Lock fitting kit, door 69 Sun visors 74 Blanking plugs 85 Lock set 66, 68 Superflex bushes 89 Body panels 64-65 F Lockheed servo 41 Switches, dashboard 56-58 Bonnet cable 66 Facet fuel pump 23 Lumenition ignition 55 Synchro ring, gearbox 25 Bonnet moulding 66 Fan belt 19 Bonnet 66 Fan 19 M T Books 93 Filler cap 23 Map pocket 79, 80 Tailgate GT 66 Boot lid 66 Flasher box 56 Mirrors, exterior 69, 76 Temperature transmitter 12, 58 Boot rack 82 Flasher unit 60 Mirrors, interior 74 Thermostat 12 Brake calliper 46 Floor 65 Moto-lita steering 47, 90 Tonneau cover 82 Brake disc 46 Fog lamp 63, 91 Mouldings 64 Tool and jack bag 80 Brake drum 44 Formula Power lead set 87 Tool bag 52 Brake fluid 36, 39 Frame, hood 81 O Trim panels 79 Brake hoses 42 Front brakes 46 Oil cooler 15 Brake improvements 88 Front suspension 33-35 Oil filter conversion 87 U Brake pedals 37 Fuel pump 23 Oil filter 10, 14 Union jack 92 Brake pumps 38-39 Fuel tank 23 Oil 10 Universal joint 29 Brake switch 42 Overdrive switch 27 Universal joint, steering 47 Bumper mounting kits 72 G Overdrive 30 Bumpers 72 Gasket set, engine 10 Overriders 72 V Gear lever gaiter 78 Vacuum unit, distributor 54 C Gear lever knob 26, 78 P Valve, heater 19 Camshaft 12 Gearbox mountings 16 Pedal rubber 36 Voltage stabilizer 56-58 Carburettor oil 22 Gearbox oil 24 Polyurethane bushes 89 Carburettors 22 Gearbox 24-27 Propellor shaft 29 W Carpet sets 80 Girling servo 40 Punch & bed kit 82 Walnut veneer dashboard 90 CD-rom 93 Glue 78, 80 Water pump 19 Chassis plate 92 Green brake pads 88 R Weber parts 86 Choke cable 16 Grill 72 RAC badge 71 Wheel cylinder 44 Cigar lighter 58 Grommet kit 85 Radiator 19 Wheel nut 52 Close ratio gearkit 87 Grose jet 22 Rear axle 50 Wheels 52 Clutch hydraulics 36 GT specials 84 Rear brakes 44 Window regulator 70 Clutch 15 Rear suspension 49 Windscreen washer kit 76 Cockpit rail cover 78 H Reverse lamp 60 Windscreen 74 Coil, ignition 10 Handbrake 44 Reverse light switch 26 Wings, front/rear 64 Condensor 10, 54 Hard top 83 Rotor arm 10 Wiper motor 60 Contact set 10, 54 Headlamp cowls 91 Rubber grease 36, 39, 44 Wire wheels 52 Conzoll radio speaker 78 Headlamps 62 Wiring loom 60 Copper grease 52 Headlining kit, GT 79 S Workshop manual 24 Crankshaft 11 Heater installation 20 Safety belt 82 Cylinder head 12 Heater motor 20 Seats 77 Heater radiator 19, 20 Sebring spoilers 91 D Hood cover 82 Servo 40-41 Dashtop recovering kit 78 Hood 81 Shock absorber, front 33 Direction indicator 56-58 Horn 60 Shock absorber, rear 49 Distributor 54 Silicone brake fluid 36, 39

© Van Gestel B&C 2005 9 Engine, most important parts

Penrite oils See your local Anglo Parts dealer for more information

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

4 016.185 1 Head gasket set , all gaskets necessary to change a cylinder head incl. 11 012.058 6 Spark plugs (Not included are the exhaust sealing rings, 111.003) 12 081.163 1 Cap, distributor 5 016.186 1 Conversion gasket set (included are all gaskets for the bottom engine part) 13 081.161 1 Rotor arm 6 016.191 1 Oil seal, front 14 081.017 1 Condensor 7 016.036 1 oil seal, rear 15 081.016 1 Contact set 8 300.522 2 1 Gallon Castrol classic engine oil (4.5 L.) 16 081.171 1 Lead kit 300.501 2 5 L. Penrite classic 20W60 engine oil 181.055 1 Silicone blue H.T. lead set Capacity when oil cooler is fitted 7.3L. 17 081.001 1 Ignition coiI 9 011.137 1 Oil filter element & seals 18 186.146 A/R 1 L. ENGINE PAINT 10 101.165 2 Air filter element 187.069 A/R 400ML. ENGINE PAINT, SPRAY

10 © Van Gestel B&C 2005 Engine, most important parts

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

BEFORE REBORING: USE THE WORKSHOP MANUAL FOR THE CORRECT BORE DIMENSIONS 13 011.187 1 Pulley 29 G 1 014.160 1 PISTON SET - STD (Bore 83.36 mm) 14 011.188 1 Pulley 29 GA 014.162 1 Piston set - .020” (0,508 mm) 15 174.030 1 Washer, lock TAB 014.163 1 Piston set - .030” (0,762 mm) 16 161.309 1 Nut 014.164 1 Piston set- .040” (1,016 mm) 17 015.090 1 Camshaft bearing set 014.166 1 Piston set - .060” (1,524 mm) 18 167.086 4 Stud, UNC/UNF 3/16” x 7/8” 2 014.170 1 PISTON RING SET - STD 19 011.189 1 PLUG,dipstickboss 014.172 1 Piston ring set - .020” 20 011.190 1 PLUG, chain tensioner oil feed 014.173 1 Piston ring set - .030” 21 011.191 4 Dowel, front cover & rear plate 014.174 1 Piston ring set - .040” 22 011.192 2 Oil gallery plug 014.176 1 Pistonringset-.060” 23 172.487 2 Dowel, water pump 3 014.167 6 One PISTON LINER 24 011.194 1 Plug, distributor gear oil feed 4 015.082 1 MAIN BEARING SET - STD 25 011.147 1 Core plug set 015.083 1 Main bearing set - .010” 26 167.087 1 Stud, rear plate to crankcase 015.084 1 Main bearing set - .020” 27 061.122 1 Tab,waterdrain 015.085 1 Main bearing set - .030” 28 168.101 1 Washer, fibre 5 013.075 1 THRUST WASHER SET - STD 29 013.043 14 Bolt, main cap bearing 013.076 1 Thrust washer set - .005” 30 167.088 3 Stud, oil pump 013.077 1 Thrust washer set - .010” 31 011.028 1 Plate, fuel pump hole blanking 6 015.086 1 CON ROD BEARING SET - STD 32 016.017 1 Gasket 015.087 1 Con rod bearing set - .010” 33 162.005 2 Screw 015.088 1 Con rod bearing set - .020” 34 164.002 2 Washer, spring 015.089 1 Con rod bearing set - .030” 35 167.089 7 Cylinder head stud, long 7 013.177 6 Con rod assembly 36 167.090 7 Cylinder head stud, short 8 162.488 12 Con rod bolt 37 163.279 14 PLAIN WASHER 9 161.308 12 Nut, con rod bolt 38 161.310 14 Cylinder head nut 10 013.180 6 Small end bush 39 011.195 1 Tube, oil stick 11 013.176 1 REGROUND CRANKSHAFT, less bearings 40 011.196 1 Oil lever indicator 013.212 1 New crankshaft, less bearings 41 163.011 1 Washer, plain 12 172.242 2 KEY 42 168.102 1 Washer, rubber

© Van Gestel B&C 2005 11 Cylinder head

12 © Van Gestel B&C 2005 Cylinder head

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 012.144 1 Cylinder head, Lead free 41 013.188 1 Camshaft gear 2 012.186 1 Original valve rocker cover 42 013.187 1 Crankshaft gear 3 016.189 1 Gasket, rocker cover 43 013.021 1 T ensioner assembly 4 012.187 1 Oil filler cap assembly 44 174.003 1 Lockplate 5 163.010 7 Washer, plain 45 162.208 2 Bolt 6 162.125 7 Pan pozi screw 1/4” UNF X 5/8” 46 016.022 1 Gasket 162.123 7 Pan pozi screw 1/4” UNF x 3/4” 47 013.217 1 DAMPER, chain (for ALLOY ROCKER COVER) 48 174.031 1 Lockplate 7 172.243 3 Clip, thermo pipe retainer 49 162.005 2 Screw 8 011.197 2 Bracket, engine sling 50 013.218 1 Lock washer 9 016.187 1 Head gasket 51 161.311 1 Nut 016.185 1 Head gasket set 52 013.219 A/R Washer, shim 10 012.188 1 Complete rocker shaft assembly 53 013.220 1 Oil thrower 11 012.150 1 Rocker shaft 54 016.191 1 Oil seal, front cover 12 011.007 1 Plug screw, front 55 016.231 1 Gasket, front cover 13 012.010 1 Plug screw, rear 56 011.198 1 Cover, timing chain 14 012.189 12 Reconditioned rocker arm 57 162.081 5 Bolt, long 012.190 12 New, rocker arm 58 164.002 7 Spring washer 15 012.151 12 Rocker arm bush 59 162.481 2 Bolt, short 16 172.244 12 RIVET, PLUG, DRILLED HOLE 60 011.199 1 Housing, distributor 17 012.025 12 Adjusting screw 61 162.020 2 Screw 18 161.008 12 Adjusting nut 62 164.002 2 Spring washer 19 012.191 6 Dracket, rocker shaft (plain) 63 016.232 1 Gasket 20 012.192 1 Bracket, rocker shaft (tapped) 64 013.221 1 Thrust washer 21 162.073 7 Bolt 65 013.222 1 Shaft, distributor gear 22 164.002 7 Washer, spring 66 172.006 1 Key 23 012.193 1 Screw, shaft locating 67 013.223 1 Gear, distributor drive 24 012.194 6 Distance piece 68 167.074 15 Stud, manifold 25 012.195 6 Spring 69 167.091 2 Stud, water outlet 26 013.175 6 Inlet guide (lead free or competition) 70 012.199 1 Plug, thermal transmitter boss 012.038 6 Inlet guide, STD 71 012.200 2 Injector, air (short) US 013.175 6 Exhaust guide ( lead free or competition) 012.201 4 Injector, air (long) US 012.038 6 Exhaust guide, STD 72 012.202 2 Washer, crushing 27 012.159 6 Inlet valve 73 011.200 1 Blanking plate, heater outlet 012.160 6 Exhaust valve 74 016.028 1 Gasket 28 012.152 1 Valve spring set 75 011.201 1 Elbow, heater outlet 29 012.042 24 One valve cotter 76 162.029 2 Screw 30 012.196 12 Cup, valve spring, top 77 164.012 2 Spring washer 31 012.032 12 Cup, valve spring, bottom 78 012.203 1 Core plug 32 013.173 12 Valve stem seal 79 012.204 4 Core plug 33 013.213 12 Push rod 80 012.206 1 82° Thermostat 34 013.181 12 Cam follower, STD 81 016.233 1 Gasket 013.214 12 Cam follower, oversize .254 mm 82 161.002 2 Nut 013.215 12 Cam follower, oversize .508 mm 83 164.002 2 Washer, spring 35 012.198 1 New camshaft, STD 84 012.207 1 Water elbow 012.161 1 Reprofiled camshaft 85 016.234 1 Gasket, elbow to extension 013.224 1 Camshaft, fast road specifications 86 012.208 1 Filler neck 36 172.245 1 Key 87 061.158 1 Filler cap 37 013.216 1 Plate, locating 88 081.026 3 Screw, UNC 38 164.002 3 Spring washer 89 164.012 3 Washer, spring 39 162.005 3 Screw 90 012.140 1 Temp. transmitter (USA only) 40 013.184 1 Timing chain

© Van Gestel B&C 2005 13 Oil pump & filter

1

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 185.744 1 Aluminium rocker cover with cap 23 168.104 1 Sealing washer 43 013.225 1 Oil pump assembly & fixing kit 24 011.207 1 Container 44 016.238 1 Gasket 6 011.202 1 Cover and bracket 25 171.002 1 Spring, pressure plate 45 011.214 1 Strainer, oil 7 016.235 1 Gasket 26 163.021 1 Washer 46 164.012 3 Washer, spring 8 162.020 5 Screw, 5/16” UNF 27 168.018 1 Washer, felt 47 162.208 3 Bolt 9 168.028 5 Washer, copper 28 011.070 1 Plate pressure 48 167.088 3 Stud, oil pump to block (29G) 10 016.035 2 Gasket 29 172.037 1 Circlip 49 164.002 3 Washer, spring 11 011.026 1 Central cover, plain 30 016.042 1 Sealing ring 50 161.002 3 Nut 12 011.203 1 Cover and separator 31 011.208 1 Centre tube 51 162.474 3 Bolt 13 162.490 2 Screw with seal retainer 32 011.209 1 Insert anchor 52 164.002 3 Washer, spring 14 168.103 2 Seal, ‘0’ ring 33 011.210 1 Plate, pressure 53 016.188 1 Oil Pan gasket 15 011.204 1 Cover, water manifold 34 011.211 1 Filter adaptor 54 011.215 1 Oil pan 16 016.236 1 Gasket, side cover 35 168.020 1 Washer, copper 55 164.002 4 Spring, washer 17 162.030 13 Bolts 36 011.212 1 PLUG 56 161.002 4 Nut 18 164.002 13 Washer, spring 37 013.183 1 Valve oil pressure release 57 163.011 25 Washer, plain 19 011.205 1 SPIN-ON, oil filter conversion kit 38 016.237 1 Gasket 58 162.029 21 Screw 20 011.206 1 Oil filter, replacement 39 163.014 2 plain washer 59 011.216 1 Drain plug 21 011.137 1 Oil filter 40 164.006 2 Spring washer 017.140 1 Magnetic drawn plug 22 162.491 1 Centre bolt 41 162.218 2 Bolt 60 168.105 1 Washer, drain plug 42 013.182 1 Oil pump repair kit

14 © Van Gestel B&C 2005 Oil cooler, clutch & flywheel

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 060.003 1 Oil cooler, engine - 13 ROW 28 011.183 1 Cap, support block 49 016.229 1 Gasket rear plate 2 060.016 1 Oil cooler, engine - 10 ROW 29 162.088 1 Bolt USE PRIOR TO CONVERSION SET 016.186 3 060.021 1 Oil cooler, gearbox - AUTOMATIC 30 163.001 1 Washer, plain 50 011.184 1 Plate assembly, rear engine mounting 7 071.009 1 Flexible, inner (long) 31 164.002 1 Washer, spring 51 162.486 2 Screw, long 8 071.010 1 Flexible, outer (short) 32 172.151 2 Clip, flexible pipe to gearbox 52 162.072 6 Screw, short 9 011.066 2 Grommet, hose 33 162.139 1 Screw 53 164.006 9 Spring, washer 10 133.552 1 Bracket, hose, cooler 34 163.007 2 Washer, plain 54 161.026 1 Nut 11 011.065 2 Strap kit, hoses 35 164.015 1 Washer, spring 55 011.146 1 Crankshaft bush, manual 12 133.553 2 Pedestal, oil cooler 36 161.024 1 Nut 011.163 1 Crankstaft bush, automatic 13 162.485 4 Bolt 37 133.554 4 Distance tube, gearbox cooler 56 011.084 1 Starter ring, manual 15 163.010 4 Washer, plain 38 162.026 4 Bolt 57 011.140 1 Flywheel assembly 16 164.012 4 Washer, spring 39 163.010 4 Washer, plain 58 172.002 3 Dowel pin 17 011.067 1 Union, adaptor 40 164.012 4 Washer, spring 59 174.007 1 Lock plate 18 168.016 1 Washer, adaptor union 41 021.029 1 Clutch cover 60 162.487 6 BOLT, FLYWHEEL TO CRANKSHAFT 19 071.012 1 Pipe, automatic, short 021.107 1 Fast Road clutch cover 61 011.166 1 Starter ring, AUTOMATIC 20 071.013 1 Pipe, automatic, long 42 021.030 1 Clutch plate 62 011. 185 1 Plate, AUTOMATIC 21 172.079 1 Clip, pipe 021.108 1 Fast Road clutch plate 63 174.029 4 Tab plate 22 162.051 1 Screw 43 021.031 1 Release bearing 64 162.045 8 SCREW 23 163.007 1 Washer 44 172.046 2 Clip, bearing retainer 65 161.002 8 Nut 24 164.015 1 Washer, spring 45 162.005 6 Screw 66 011.186 1 DRIVE PLATE assembly, automatic 25 071.011 2 Flexible, gearbox cooler to rigid pipe 46 164.002 6 Washer, spring 67 011.165 1 Plate, support 26 011.181 2 Connector, automatic gearbox to pipe 47 016.036 1 Oil seal, crankshaft 68 011.164 1 Plate, crankshaft back 27 011.182 1 Support block, pipes 48 023.007 1 Oil seal, gearbox

© Van Gestel B&C 2005 15 Engine mountings & control cables

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QT DESCRIPTION ILL N° PART N° QT DESCRIPTION

1 101.178 1 Accelerator cable, LHD 11 101.024 1 GUIDE 26 133.546 1 KIT, ENGINE MOUNTINGS FIXING 101.179 1 Accelerator cable, RHD 12 162.060 2 SCREW 27 027.093 2 Gearbox mounting rubber 2 101.079 1 Choke cable, LHD 13 162.480 1 Bolt, cable to shaft 28 133.547 1 KIT, GEARBOX MOUNTING FIXING 101.180 1 Choke cable, LHD (N. America) 14 164.015 1 Washer, spring 29 011.171 1 RH engine mounting bracket 101.181 1 Choke cable, RHD 15 161.028 1 Nut 30 011.172 1 LH engine mounting bracket 3 133.543 1 Accelerator pedal, LHD 16 011.065 1 Strap (to be adjusted) 31 011.173 1 RH restrictor 133.544 1 Accelerator pedal, RHD 17 172.054 1 Fastener 32 011.174 1 LH restrictor 4 101.078 1 Pedal stop, LHD 18 162.271 1 Screw 33 162.056 8 Screw, bracket to engine 133.545 1 Pedal stop, RHD 19 101.081 1 Cable abutment 34 164.006 8 Washer, spring 5 101.022 1 BUSH 20 164.022 1 Double spring washer 36 162.211 4 Screw, cross member to body 6 101.077 1 Tube distance 21 163.033 1 Plate, spring fixing 37 164.006 4 Washer, spring 7 164.002 1 Washer, spring 22 171.024 1 Spring 38 163.005 4 Washer, plain 8 162.128 1 BOLT 23 172.238 2 Clip, cable to bulkhead 39 132.358 1 Cross member 9 172.237 1 Cable fastener 24 172.239 1 Clip, kick-down cable, automatic 10 101.076 1 Pad 25 011.144 2 Engine mounting rubber

16 © Van Gestel B&C 2005 Exhaust system

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 110.028 1 FRONT PIPE 21 162.076 A/R Screw, 1/4” UNF 42 011.178 1 Adaptor, servo 2 110.029 1 CENTRAL SILENCER 22 164.012 A/R 1/4” spring washer 43 110.106 1 Front exhaust manifold, 29G 3 110.030 1 Rear silencer 23 161.019 2 Nut, 1/4” UNF 44 110.107 1 Rear exhaust manifold, 29G 4 111.067 2 EXHAUST CLAMP 24 111.006 1 Intermediate mounting rubber 45 016.190 1 Gasket, manifold to head 5 111.068 1 FRONT FITTING KIT 25 111.007 1 Intermediate bracket 46 011.176 1 Inlet manifold, 29GA 6 111.069 1 FRONT mounting kit 26 111.004 2 Bush & isolator 47 167.084 4 Stud 7 111.014 1 INTERMEDIATE mounting kit 27 162.025 1 Bolt 48 016.228 2 Gasket, hot spot 8 111.054 1 REAR mounting kit 28 111.058 1 Bracket, hanger, rear 49 110.108 1 Front exhaust manifold, 29GA 9 111.057 1 Bracket (spotwelded on body), 29 111.055 1 Bracket, rear 50 110.109 1 Rear exhaust manifold, 29GA rear exhaust bracket to body 30 111.062 2 Saddle 51 161.002 4 Nut 10 111.003 2 EXHAUST PACKING 31 162.020 2 Screw, 5/16” UNF x 1” 52 164.002 4 Spring washer 11 161.030 6 Brass nuts 32 011.175 1 Inlet manifold, 29G 53 167.074 15 Stud, manifold to head 12 164.002 A/R 5/16” spring washer 33 011. 179 1 Connector, front hot spot 54 163.014 15 Washer, plain 13 161.002 A/R 5/16” UNF, nut 34 011.180 1 Connector, rear hot spot 55 161.307 15 Nut 3/8” UNF, brass-long 14 163.008 2 plain washer 35 162.085 4 Screw, long 56 167.013 6 Stud, exhaust pipe 15 111.060 4/8 Washer, heat insulation 36 162.096 4 Screw, short 57 167.085 6 Repair stud, to repair an oversized 16 111.066 2/4 Mounting rubber 37 163.001 8 Washer, plain hole 7/16” UNC at manifold side and 17 111.063 2 Bracket 38 164.002 8 Washer, spring standard 3/8” UNF at exhaust side 18 111.064 1 Bracket, hanger 39 011.177 2 Pech, welch 58 200.481 1 3/8” UNC tap 19 111.065 1 Saddle 40 011.073 1 Adaptor, breather tube 200.482 1 7/16” UNC tap 20 162.005 A/R Screw, 5/16” UNF 41 168.023 1 Washer, fibre 59 200.554 1 8 mm drill

© Van Gestel B&C 2005 17 Emission control - USA

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 104.001 1 Valve assembly, emission control 24 164.006 2 Washer, spring 47 104.021 1 Hose, check valve to ‘T’ piece 2 104.002 1 Spring, top 25 161.003 2 Nut 48 104.022 1 Hose, gulp valve to ‘T’ piece 3 104.003 1 Plunger 26 104.011 1 Bracket, rear air pump mounting 49 104.023 1 Hose, ‘T’ piece to air pump 4 081.044 1 Diaphragm 27 104.012 1 Bracket, front air pump mounting 50 104.024 1 Hose, air pump to air cleaner 5 081.043 1 Plate, valve cover 28 104.013 1 Link, adjusting 51 172.026 2 Clip, hose control valve to separator 6 081.042 1 Clip, spring 29 104.014 1 Bracket, adjusting link 51 172.026 2 Clip, hose breather 7 162.077 1 Bolt, valve to bracket 30 162.128 1 Bolt, link to water manifold 52 172.026 2 Clip, hose gulp valve to breather tube 8 164.012 1 Washer, spring 31 162.081 1 Bolt, link and water pump to block 53 172.114 4 Clip, hose valve and pump to ‘T’ piece 9 161.019 1 Nut 32 162.056 2 Bolt, rear bracket to block 54 172.114 2 Clip, hose gulp valve to ‘T’ piece 10 104.004 1 Pump assembly, air (less pulley) 33 162.041 2 Bolt, front bracket to front cover 54 172.114 2 Clip, hose air pump to air cleaner 11 104.005 1 Valve, pressure relief 34 164.002 4 Washer, spring 55 172.246 1 Clip, hose air pump 12 104.006 1 Tube, intake 35 163.008 4 Washer, plain 56 104.025 1 Bracket, air pump hose clip 13 104.007 1 Tube, exhaust 36 162.020 1 Screw, link to bracket 57 162.054 1 Screw, self tapping 14 104.008 1 Pulley, air pump 37 164.002 1 Washer, spring 58 104.026 1 Manifold assembly, air 15 163.008 4 Washer, plain 38 163.008 1 Washer, plain 59 104.027 2 Banjo 16 164.002 4 Washer, spring 39 161.002 1 Nut 60 172.247 2 Clip 17 162.005 4 Screw, pulley to pump 40 104.015 1 Valve assemby, gulp 61 104.028 2 Bolt, banjo 18 104.009 1 Belt, air pump driving 41 104.016 1 Valve, gulp 62 168.106 4 Washer, banjo bolt 19 104.010 1 Pulley air pump driving 42 104.017 1 Bracket, gulp valve 63 104.029 1 Valve, check 20 164.002 4 Washer, spring 43 162.493 3 Screw, self tapping 64 104.030 1 ‘T’ piece 21 162.020 4 Screw, driving pulley to crankshaft 44 104.018 1 Tube, breather and gulp valve 65 104.031 1 Adaptor, control pipe to manifold 22 162.492 2 Bolt, pump to mounting bracket 45 104.019 1 Hose, control valve to separator 66 168.107 1 Washer, adaptor to manifold (fibre) 23 163.014 2 Washer, plain 46 104.020 2 Hose, breather tube to valves 67 162.090 2 Screw, bracket to manifold

18 © Van Gestel B&C 2005 Cooling & radiator

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 062.027 1 Radiator top hose 20 061.114 2 Rubber pad 40 061.121 1 Spacer 2 062.028 1 Radiator bottom hose 21 061.115 1 Expansion tank, N. AMERICA 41 162.483 3 Screw, spacer to pulley 3 172.240 4 Clamp, wire type 42 mm 22 061.116 2 Strap, expansion tank fixing 43 061.099 1 Fan, 6 blade (plastic) 4 060.019 1 Radiator assembly, NEW 23 061.117 1 Channel. rubber packing 44 162.484 3 Screw, fan to spacer 060.063 1 Radiator assembly, Aluminium 24 061.086 1 Water pump assembly 45 063.071 1 Hose, heater to engine outlet 5 061.107 1 RADIATOR PLUG 25 016.223 1 GASKET, WATERPUMP 46 063.072 1 Hose, heater to heater pipe 6 132.359 1 RH radiator mounting bracket 26 162.481 5 BOLT 47 062.016 A/R 1 Meter, heater hose 7 132.360 1 LH radiator mounting bracket 27 164.002 5 WASHER, SPRING 48 172.026 A/R Clamp, wire type 8 133.548 1 RH radiator top bracket 28 168.098 1 Washer, fibre 49 063.073 1 Water valve, early type 9 133.549 1 LH radiator top bracket 29 162.482 1 Screw, lubricator point 016.177 1 Gasket 10 133.550 1 RH radiator bottom bracket 30 061.118 1 Adaptor for heater pipe 50 168.100 1 Ring, valve sealing 11 132.361 1 Cowl for fan 31 168.094 1 WASHER 51 063.074 1 Valve mounting bracket 12 061.108 1 Upper seating, seal 32 061.119 2 Adaptor, by pass 52 063.067 1 Water valve, late type 13 061.109 1 Lower seating, seal 33 168.099 2 WASHER 53 063.075 1 Valve mounting bracket 14 061.110 1 Hose, tank to filler neck 34 062.081 1 Hose, by pass 54 063.004 1 Radiator for heater 15 061.111 1 Hose, tank to filler neck, N. AMERICA 35 172...... 1 Clip 55 063.005 2 GROMMET, radiator pipe 16 172.149 1 Clip, hose to cowl 36 063.069 1 Connection hose, pipe to adaptor 56 063.007 5 Clamp, heater box 17 061.112 1 Expansion tank, NOT N. AMERICA 37 172.241 2 Clip, hose 57 063.038 1 Dust seal, intake 18 061.088 1 Filler cap 38 063.070 1 Pipe, water return 58 133.335 1 Mesh, intake 19 061.113 1 Clamp for expansion tank 39 061.120 1 Pulley 59 186.159 1 4 L. anti-freeze 60 061.123 1 Fan belt

© Van Gestel B&C 2005 19 Heater installation

20 © Van Gestel B&C 2005 Heater installation

ILL N° PART N° QTY DESCRIPTION APPLICATION ILL N° PART N° QTY DESCRIPTION APPLICATION

1 063.164 1 Heater assembly 48 172.057 2 Rivet, knob position Only non illuminated knobs 2 133.093 1 Heater box 49 063.031 1 Knob heat LHD European ‘63-’74 3 133.092 1 Front cover heater box 50 063.076 1 Knob heat LHD USA 4 063.167 1 Heater flap 55 063.029 1 Control air direction LHD Europe 5 162.061 4 Screw, heater flap fixing 133.582 1 Control air USA cars 6 063.007 5 Clip heater 56 134.021 1 Air control cable Metal dash 7 063.004 1 Radiator 134.098 1 Air control cable USA plastic dash 8 063.101 1 Felt pad kit radiator Longest cable, can be cut to length 9 121.281 1 Heater radiator foam ’67 on 57 172.023 1 Clamp cable to heater flap 10 063.005 2 Grommet radiator tube 58 164.015 1 Washer, spring 11 121.243 1 Seal heater to body Cut out part to fit 59 162.051 1 Screw 12 121.028 1 Seal, foam 60 063.032 1 Knob air LHD European ‘63-’74 USA ‘63-’67 13 063.038 1 Dust seal heater to body 61 063.077 1 Knob air LHD USA 14 133.335 1 Heater fan grille 66 141.022 1 Air intake grille 15 082.043 1 Heater motor, late type 67 133.868 1 Mesh, air intake grille, non original Keeps out leaves! 16 133.091 1 Runner standard 68 172.033 6 Clip, air intake fixing 063.126 1 Runner improved 69 172.233 6 Fix blind, also use when you fix 67! 17 172.637 1 Clip runner fixing to motor 70 133.090 2 Heater, door outlet 18 162.051 3 Screw, motor to heater box 71 162.061 8 Screw, heater door outlet 19 164.015 3 Washer, spring 74 063.035 2 Tube, heater to elbow 20 163.013 3 Washer, plain 75 133.883 1 Plate airtube to body 21 085.006 1 Sticker smiths heater small 76 ...... 4 Screw, plate fixing 22 085.007 1 Sticker smiths heater large 77 063.034 2 Elbow 23 085.008 1 Sticker smiths heater motor 78 133.086 2 Hose, alu/paper 24 162.125 1 Screw, heater top 79 172.447 2 Clip demister hose 25 164.012 1 Washer, spring 80 165.... 2 Screw for clip 26 163.011 1 Washer, plain 81 163.184 2 Cup washer, black 27 162.060 4 Screw, heater to bulkhead 82 063.036 1 Tube drain 162.051 1 Screw, heater to bulkhead 83 172.060 1 Clamp for tube drain 28 164.015 5 Washer, spring 84 133.087 1 Fresh air door 29 163.011 5 Washer, plain 85 133.089 1 Knob door 35 172.056 4 Trunnion, heater cables 86 133.088 1 Seal door 36 162.135 4 Screw, trunnion 87 162.061 4 Screw, door fixing to body 37 134.098 1 Cable, heat control USA plastic dash 88 172.061 1 Spring, fresh air door Longest cable, can be cut to length 89 163.010 1 Washer, plain 38 172.055 1 Clip, heater motor cables 90 164.012 1 Washer, spring 39 122.002 1 Grommet, heat cable bulkhead 91 162.029 1 Screw 40 063.028 1 Control heat LHD cars Europe 92 063.122 1 Foam, heater hoses to heater 133.581 1 Control heat USA cars 93 063.129 2 Hose, plastic 41 172.023 2 Clamp cable to control 94 133.084 1 RH demister nozzle Europe ‘63-’74 USA 42 162.134 2 Screw for clamp 133.085 1 LH demister nozzle Europe ‘63-’74 USA 43 172.058 2 Clip for knob 95 164.015 4 Washer, spring 44 172.059 2 Pin for knob 96 161.024 4 Nut, demister fixing 45 164.016 2 Washer, shakeproof 97 133.083 2 Escutcheon, Europe ‘63-’74 USA ‘63-’67 46 161.055 2 Nut, control fixing 98 063.124 1 RH demister nozzle USA 47 163.034 2 Washer 063.125 1 LH demister nozzle USA 99 063.123 2 Escutcheon

© Van Gestel B&C 2005 21 Carburettors & filters

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 102.246 1 1967-68, AUD 150, front carburettor 8 102.107 2 Float 22 101.165 2 Air filter element (NOT USA) 102.247 1 1967-68, AUD 150, rear carburettor 9 102.237 2 Gasket 101.166 2 Air filter element (USA) 102.248 1 1969, AUD 341, front carburettor 10 102.264 2 Throttle spindle, standard size 23 101.167 2 Rubber sealing ring 102.249 1 1969, AUD 341, rear carburettor 102.281 2 Throttle spindle, oversize 101.168 2 Rubber sealing ring (USA) 102.250 1 1968 (USA) AUD 287, front carburettor (use tool n° 102.275) 24 161.305 2 Air filter nut, square head 102.251 1 1968 (USA) AUD 287, rear carburettor 11 102.113 2 Set of two bushes to repair a worn 161.306 2 Air filter nut, square head (USA) 102.252 1 1969 (USA) AUD 342, front carburettor out carburettor with standard shafts 25 168.008 2 Washer, fibre 102.253 1 1969 (USA) AUD 342, rear carburettor 12 102.265 2 DISC 1 3/4”, plain 26 101.169 2 Distance piece 2 102.254 1 Service kit for one pair carburettors 102.266 2 DISC 1 3/4”, with over-run valve 27 016.222 2 Gasket HS6, AUD 150 - AUD 341 or AUD 342 13 102.050 4 Screw 28 101.170 1 Front mounting bracket (NOT USA) 3 102.255 1 Rebuilding kit for one pair carburettors 14 102.267 1 Float chamber adaptor, FRONT 101.172 1 Front mounting bracket (USA) HS6, AUD 150 - AUD 341 or AUD 342 102.268 1 Float chamber adaptor, REAR 29 101.171 1 Rear mounting bracket (NOT USA) 4 102.259 2 Sundries kit, including small parts: 15 330.070 1 Special SU-Zenith carburettor oil 101.173 1 Rear mounting bracket (USA) screws, springs, pins etc. (for 1 carb.) 16 200.572 1 Carburettor synchroniser 30 171.024 3 Spring 5 102.261 2 Needle ST (AUD 150, AUD 341) 17 185.124 2 1 3/4” SU DASHPOT COVERS, 31 101.174 1 Heatshield, (29G) 102.262 2 Needle KM (AUD 287) chrome plated 32 101.175 1 Plate, spring ANCHOR 102.263 2 Needle BAD (AUD 342) 18 185.012 2 K&N air filter assembly 33 101.176 1 Heatshield, (29GA) 6 102.216 2 Grose jet, improvement for the ‘SU’ 101.102 2 K&N replacement filter 34 101.177 1 Plate, spring ANCHOR needle and seat. This efficient fuel 19 186.043 1 K&N cleaner 35 102.275 1 Reamer for oversize shafts cut-off is based on a ball system 20 186.042 1 K&N oil spray (no bushes required) 7 102.072 2 Needle and seat 21 101.163 1 Air cleaner assembly (NOT USA) 102.156 2 Improved needle and seat with viton head 101.164 1 Air cleaner assembly (USA)

22 © Van Gestel B&C 2005 Fuel pump & tank

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 101.052 1 Fuel Pump, S.U. 10 101.938 A/R 5 meters fuel pipe 22 101.054 1 Hose 2 101.050 1 Fuel pump mounting rubber 11 161.070 A/R End piece, to be solded on 23 101.055 1 Pipe, filler neck 3 132.095 1 Fuel pump mounting bracket 12 161.068 A/R Nipple, to be solded on 24 101.056 1 Ferrule, filler neck 4 102.079 2 Banjo bolt 13 161.067 A/R Nut for nipple 161.068. 25 101.058 1 Chrome filler cap with lock 5 102.080 4 Washer, fibre 14 100.005 1 Fuel tank 26 101.057 1 Filler cap 6 101.049 1 Flexible, Pump to pipe 15 133.205 1 Fuel tank bolting kit 27 062.019 A/R 1 Meter fuel resistant hose, 7 102.098 1 Union-banjo 16 101.060 1 Sealing ring 6.3 mm 1.D. 8 101.191 1 “FACET” High Capacity pump 17 101.059 1 Locking ring 062.020 A/R 1 Meter fuel resistant hose, assembly for extra reliability, with 18 083.065 1 Sender unit 7,9 mm I.D. a solonoid pump action. 19 121.041 2 Strip-packing 28 172.051 A/R Clamp for 062.019 NEGATIVE EARTH ONLY 20 101.053 1 Seal, tank to floor 29 172.174 A/R Clamp for 062.020 9 101.192 1 PAIR, UNIONS for 1/4” diameter 21 172.115 2 Clamps pipe ends

© Van Gestel B&C 2005 23 Gearbox standard, part 1

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 020.039 1 GEARBOX ASSEMBLY - REBUILD 6 020.040 1 Main casing 24 167.079 3 Stud NOT INCLUDED: CLUTCH FORK, 7 023.394 1 Stone guard 25 161.002 3 Nut REMOTE CONTROL & GEAR LEVER, 8 081.026 4 Screw 26 162.085 5 Screw PINION SPEEDOMETER & HOUSING, 9 164.002 4 Washer, spring 27 164.002 8 Washer, spring CLUTCH DUST GAITER & DUST PLATE 10 023.001 1 Drain plug 28 023.134 1 Button thrust, speedometer pinion 2 016.165 1 Gasket 11 023.392 1 Front cover & fork mounting plate 29 162.089 1 Plug (overdrive switch hole) 3 023.409 1 BOLTING KIT, GEARBOX TO ENGINE, 12 023.007 1 Front oil seal 30 168.023 1 Gasket DUST PLATE MOUNTING & STARTER 13 016.162 1 Gasket, front cover 31 023.167 1 Pin, location MOUNTING 14 167.080 8 Stud 32 023.393 1 Clutch lever 4 023.410 1 OVERHAUL KIT 15 164.002 8 Washer, spring 33 023.115 1 Bush THIS KIT INCLUDES THE MOST 16 161.002 8 Nut 34 023.117 1 Bolt IMPORTANT PARTS TO REBUILD 17 023.279 1 Cover, gearbox side 35 161.025 1 Locknut YOUR GEARBOX. INCLUDED ARE ALL 18 016.164 1 Gasket 36 163.005 1 Washer GASKETS, OIL SEALS, BEARINGS, 19 164.002 10 Washer, spring 37 023.395 1 Dust cover NEEDLE CAGES, LAYSHAFT AND 20 162.086 10 Screw 38 186.001 3 1 L. gearbox oil SYNCHRO RINGS 21 020.029 1 Extension, rear 39 190.060 1 MGC, original workshop manual 5 016.183 1 GASKET SET, ALL GASKETS NO 22 023.093 2 Dowel OIL SEALS! 23 016.163 1 Gasket

24 © Van Gestel B&C 2005 Gearbox standard, part 2

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QT DESCRIPTION ILL N° PART N° QT DESCRIPTION

1 023.280 1 Shaft, 1 st motion 20 023.307 1 Shaft, 3rd motion 40 023.322 1 Bearing, 3rd motion shaft front 2 023.281 1 Bearing, ball 21 023.050 1 Oil restrictor 41 023.323 A/R Shim, .051 mm 3 023.282 1 Spring ring 22 023.308 1 Gear, reverse, 3rd motion shaft 023.324 A/R Shim, .102 mm 4 023.283 A/R Shim, 1 st motion shaft, .051 mm 23 023.386 1 1 st speed gear assembly 42 023.325 1 Housing for bearing 023.284 A/R Shim, 1 st motion shaft, .102 mm 24 023.310 1 Bush 43 023.326 1 Peg locating 5 023.285 1 Bearing, needle roller 25 023.311 1 2nd speed gear assembly 44 023.327 1 Distance piece, 3rd motion shaft 6 023.286 1 Lock washer 26 023.312 1 Bush 45 023 328 1 Speedometer gear (10 teeth) 7 023.287 1 Nut, 1 st motion shaft 27 023.313 1 1st and 2nd speed synchronizer 46 172.005 1 Key, speedometer gear 8 023.288 1 Layshaft assembly 47 023.331 1 Lock washer 9 023.289 1 Laygear 28 023.069 3 Ball 48 023.332 1 Nut, 3rd motion shaft, front 10 023.290 1 Thrust washer, laygear front 29 023.314 3 Spring 49 023.333 1 Tube, distance (with sleeve) 11 023.291 A/R Thrust washer, rear, 3.91 to 3.96 mm 30 023.315 2 Synchro ring 50 023.057 1 Bearing, 3rd motion shaft. rear 023.292 A/R Thrust washer, rear, 3.99 to 4.01 mm 31 023.317 1 Washer, thrust, 2nd speed gear 51 023.334 A/R Shim, rear bearing, 0.002” 023.293 A/R Thrust washer, rear, 4.06 to 4.09 mm 023.335 A/R Shim, rear bearing, 0.005” 023.294 A/R Thrust washer, rear, 4.14 to 4.17 mm 32 023.318 1 Washer, thrust, interlocking 023.336 A/R Shim, rear bearing, 0.010” 12 023.301 2 Bearing, needle roller, laygear 33 023.319 1 Sleeve, mainshaft 52 023.337 1 Circlip, 0.096” /0.098” 13 023.302 1 Tube, distance, bearing 34 023.320 1 3rd speed gear assembly 023.338 1 Circlip, 0.098” / 0 100” 14 023.303 2 Spring ring 35 023.310 1 Bush 023.339 1 Circlip, 0.100” / 0.102” 15 023.304 1 Reverse shaft 36 023.321 1 3rd and 4th speed synchronizer 53 023 340 1 Oil seal, rear 16 023.141 1 Screw assembly 54 020.029 1 Flange, 3rd motion shaft 17 023.091 1 Lock washer 37 023.069 3 Ball 55 023.342 1 Lock washer 18 023.305 1 Reverse gear 38 023.314 3 Spring 56 161.299 1 Nut 19 023.306 1 Bush 39 023.316 2 Synchro ring

© Van Gestel B&C 2005 25 Gearbox standard, part 3

ILL N° PART N° QTY DISCRIPTION ILL N° PART N° QTY DISCRIPTION ILL N° PART N° QTY DISCRIPTION

1 020.030 1 Housing, remote control 27 023.150 2 Pin, locating 52 023.345 1 Fork, 3rd and 4th 2 023.405 2 Bush 28 161.002 2 Washer, spring 53 023.346 1 Rod, reverse 3 016.165 1 Gasket (included in gasket set) 29 023.356 1 Damper 54 023.347 1 Rod, 1 st and 2nd 4 162.469 4 Bolt, long 30 023.106 1 Spring 55 023.348 1 Rod, 3rd and 4th 5 162.096 2 Bolt, short 31 023.253 1 Cap 56 023.349 1 Selector, reverse 6 164.002 6 Washer, spring 32 168.013 1 Washer 57 023.350 1 Selector, 1 st and 2nd 7 023.017 1 Breather assembly 33 023.372 1 Cover gear lever 58 023.351 1 Selector, 3rd and 4th 9 023.355 1 Shaft, remote control 34 162.471 3 Special screw 59 162.087 3 Screw, fork locating 10 023.354 1 Lever, remote control 35 164.030 3 Double spring washer 60 164.007 3 Washer, shakeproof 11 172.014 1 Key, lever to shaft 36 023.378 1 Dipstick assembly 61 161.034 3 Lock nut 12 023.397 1 Bolt 37 023.406 1 Bobbin 62 023.035 3 Screw, selector locating 13 164.002 1 Washer, spring 38 023.407 2 ‘0’ ring 63 023.352 1 Lever, selector 14 023.356 1 Plunger 39 023.408 1 Pinion, speedometer 64 023.353 1 Shaft, selector lever 15 023.106 1 Spring 40 023.128 1 Gasket 65 023.396 1 Screw, selector locating 16 023.253 1 Cap 41 023.137 1 Bush, pinion 66 161.300 1 Lock nut 17 168.013 1 Washer 42 023.064 1 Oil seal 67 023.398 1 Arm & bracket, interlocking 18 023.361 1 Plunger, reverse selector 43 162.077 2 Screw 68 023.358 3 Plunger, fork rod 19 023.102 1 Spring 44 164.012 2 Washer, spring 69 023.359 3 Spring, detent plunger 20 023.167 1 Pin 45 172.234 1 Bracket for wiring clip 70 023.360 3 Plug, plunger 21 083.052 1 Switch, reverse light 46 172.019 1 Wiring clip 71 168.095 3 Washer, plug 22 168.023 1 Gasket 47 163.007 1 Washer, plain 72 023.027 1 Ball, reverse plunger 23 023.364 1 Lever, gear change 48 164.015 1 Washer, spring 73 023.399 1 Spring, reverse detent 24 023.021 1 Bush, nylon 49 161.024 1 Nut 74 168.001 1 Washer, detent plug 25 023.365 1 Knob, gear change 50 023.343 1 Fork, reverse 75 023.400 1 Plug, reverse detent 26 161.304 1 Nut lock, chrome plated 51 023.344 1 Fork, 1 st and 2nd

26 © Van Gestel B&C 2005 Gearbox overdrive, part 1

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 020.042 1 GEARBOX & OVERDRIVE 13 016.162 1 Gasket 40 023.021 1 Bush, lever ASSEMBLY - REBUILD 14 164.002 8 Washer, spring 41 023.150 2 Pin, lever locating Not included: clutch fork, remote 15 161.002 8 Nut 42 164.002 2 Washer spring control & gear lever, pinion 16 023.279 1 Side cover 43 023.356 1 Plunger, lever damping speedometer & housing, clutch dust 17 016.164 1 Gasket 44 023.106 1 Plunger, spring gaiter & dust plate 18 164.002 10 Washer, spring 45 023.253 1 Plunger, retaining cap 2 020.043 1 GEARBOX FOR OVERDRIVE - REBUILD 19 162.086 10 Screw 46 168.013 1 Washer, cap Not included: clutch fork, remote 20 020.038 1 Adaptor overdrive 47 023.372 1 Lever seat cover control & gear lever, pinion 21 023.093 1 Dowel 48 162.471 3 Cover screw speedometer & housing, clutch dust 22 016.166 1 Gasket 49 164.030 3 Washer, spring, double coil gaiter & dust plate 23 161.002 3 Nut 50 083.052 1 Switch, reverse light or overdrive 3 016.165 1 Gasket 24 164.002 3 Washer, spring 51 168.023 1 Washer, switch 4 023.409 1 Bolting kit, gearbox to engine, dust 25 162.085 5 Screw 52 023.165 1 Spring, plunger plate mounting & starter mounting 26 164.002 5 Washer, spring 53 023.391 1 Isolation switch, plunger 5 023.411 1 OVERHAUL KIT 27 020.030 1 Remote control housing 54 023.167 1 Pin, plunger locating This kit includes the most important 28 023.405 2 Bush 55 023.393 1 Lever, clutch withdrawal parts to rebuild your gearbox. 29 016.165 1 Gasket 56 023.115 1 Bush Included are: all gaskets, oil seals, 30 162.469 4 Screw 57 023.117 1 Lever, bolt bearings, needle cages, layshaft 31 162.096 2 Screw 58 163.005 1 Washer, bolt and synchro rings 32 164.002 6 Washer, spring 59 161.025 1 Nut 6 016.184 1 Gasket set, all gaskets, NO oil seals! 33 023.093 2 Dowel, remote control housing 60 023.395 1 Dust lever, cover 7 023.040 1 Main casing 34 023.394 1 Guard, stone clutch housing 61 023.378 1 Indicator assembly, oil level 8 167.080 8 Stud, front cover 35 164.002 4 Washer spring 62 023.406 1 Bobbin 9 167.079 3 Stud, overdrive adaptor 36 081.026 4 Screw 63 023.407 2 Packing ring 10 023.001 1 Plug, drain 37 023.364 1 Lever, change speed 64 186.001 4 1 L. gearbox oil (capacity 3.4 L) 11 023.392 1 Front cover 38 023.365 1 Lever knob 65 190.060 1 MGC original workshop manual 12 023.007 1 Oil seal 39 161.304 1 Lock nut

© Van Gestel B&C 2005 27 Gearbox overdrive, part 2

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 024.910 1 Shaft, 1 st motion 15 023.304 1 Reverse shaft 33 023.319 1 Sleeve, mainshaft 2 023.281 1 Bearing 16 023.141 1 Screw, shaft locking 34 023.401 1 Gear, 3rd speed 3 023.282 1 Spring ring 17 023.091 1 Lock washer 35 023.310 1 Bush 4 023.283 A/R Shim, 0.002” 18 023.305 1 Reverse gear 36 023.321 1 3rd and 4th speed synchronizer 023.284 A/R Shim, 0.004” 19 023.306 1 Bush 37 023.069 3 Ball 5 023.285 1 Bearing, needle roller 20 023.379 1 Shaft, 3rd motion 38 023.314 3 Spring 6 023.286 1 Lock washer 21 023.050 1 Oil restrictor 39 023.316 2 Ring, baulks, 3rd and 4th speed 7 023.287 1 Nut 22 023.308 1 Gear, reverse, mainshaft 40 023.402 1 Bearing, 3rd motion shaft 8 023.288 1 Layshaft 23 023.386 1 Gear, 1 st speed, mainshaft 41 023.334 A/R Shim, 0.002” 9 023.403 1 Laygear 24 023.310 1 Bush 023.335 A/R Shim, 0.005” 10 023.290 1 Thrust washer, front 25 023.404 1 Gear, 2nd speed, mainshaft 023.336 A/R Shim, 0.010” 11 023.291 A/R Thrust washer, rear, 3.91 to 3.96 mm 26 023.312 1 Bush 42 023.387 1 Housing for bearing 023.292 A/R Thrust washer, rear, 3.99 to 4.01 mm 27 023.313 1 1 st and 2nd speed synchronizer 43 023.388 1 Distance piece, 3rd motion shaft 023.293 A/R Thrust washer, rear, 4.06 to 4.09 mm 28 023.069 3 Ball 44 023.390 1 Nut 023.294 A/R Thrust washer, rear, 4.14 to 4.17 mm 29 023.314 3 Spring 45 023.389 1 Lock washer 12 023.301 2 Bearing, needle roller 30 023.315 2 Ring, baulk, 1 st and 2nd speed 46 023.331 1 Lock washer, front 13 023.302 1 Tube, distance, bearing 31 023.317 1 Washer, thrust, 2nd speed gear 47 023.332 1 Nut, 3rd motion shaft, front 14 023.303 2 Spring ring 32 023.318 1 Washer, thrust, interlocking

28 © Van Gestel B&C 2005 Propellor shaft

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 023.343 1 Fork. reverse 19 172.014 1 Key 37 023.400 1 Plug, detent spring 2 023.344 1 Fork, 1 st and 2nd 20 023.397 1 Bolt 38 168.001 1 Washer, plug 3 023.345 1 Fork, 3rd and 4th 21 164.002 1 Spring washer 39 134.147 1 Propeller shaft, reproduction 4 023.346 1 Rod, reverse 22 023.355 1 Shaft, remote control 40 134.148 1 Propeller shaft, original with rubber 5 023.347 1 Rod, 1 st and 2nd 23 023.356 1 Plunger, shaft damping dust cap fitted 6 023.348 1 Rod, 3rd and 4th 24 023.106 1 Spring, plunger 41 032.207 2 Flange, yoke 7 023.349 1 Selector, reverse 25 023.253 1 Cap, retaining plunger 42 032.193 2 Universal joint with greaser 8 023.350 1 Selector, 1 st and 2nd 26 168.013 1 Cap washer 43 032.046 2 Grease 9 023.351 1 Selector, 3rd and 4th 27 023.398 1 Arm, interlocking 44 032.208 1 Sleeve yoke 10 162.087 3 Screw, fork locating 28 023.358 3 Plunger, fork rod 45 032.209 1 Sealing ring & dust cap 11 164.007 3 Washer, shakepoof 29 023.359 3 Spring, detent plunger 46 032.210 1 Rubber boot, will only fit original 12 161.034 3 Lock nut 30 023.360 3 Plug, plunger propeller shaft 13 023.035 3 Screw, selector locating 31 168.095 3 Washer, plug 47 162.463 4/8 BOLT (USE 4 PIECES ONLY WHEN 14 023.352 1 Lever, selector 32 023.361 1 Plunger, reverse selector OVERDRIVE IS FITTED) 15 023.353 1 Shaft, selector lever 33 023.102 1 Spring, plunger 48 162.470 4 BOLT, AT OVERDRIVE 16 023.396 1 Screw, selector lever locating 34 023.167 1 Pin locating plunger 49 161.025 8 SELF LOCKING NUTS 17 161.300 1 Lock nut 35 023.027 1 Ball 50 174.028 2 LOCKING PLATE AT OVERDRIVE 18 023.354 1 Lever, remote control shaft 36 023.399 1 Spring, detent plunger 51 023.021 1 Nylon bush, gear lever 52 023.412 1 Nylon bush

© Van Gestel B&C 2005 29 Overdrive

30 © Van Gestel B&C 2005 Overdrive

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 020.041 1 Overdrive unit assembly 44 025.131 1 Pinion, speedometer 2 025.142 1 Filter, ‘0’ ring and oil seal KIT. 45 025.132 1 Gear, speedometer Most problems start with a dirty filter or old and stiff ‘0’ rings. 46 025.103 16 Nut Before starting a complete overhaul, you can save yourself a lot of work 47 164.012 16 Washer, spring and costs by first changing these. 48 025.073 1 Main casing 3 025.106 1 Solenoid valve kit 49 167.030 8 Stud, main casing to adaptor 4 025.107 1 Coil solenoid 50 167.081 6 Stud, main casing to rear casing 5 025.108 1 Grommet 51 167.082 2 Stud, main casing to rear casing 6 025.086 1 ‘0’ ring 52 025.074 1 Ring, brake 7 025.087 1 ‘0’ ring 53 016.167 1 Gasket, adaptor to main casing 8 025.088 1 ‘0’ ring 016.216 1 Gasket, overdrive to adaptor 9 025.139 1 plate end 54 025.075 1 Housing, thrust bearing 10 016.215 1 Gasket 55 025.076 4 Pin, housing 11 025.089 1 Filter and gasket, sump 56 025.077 1 Bearing, thrust 12 025.109 1 Magnet set 57 025.078 1 Plate, bearing retainer 13 025.110 1 Sump 58 025.079 1 Sliding member 14 164.016 6 Washer, shakeproof 59 172.230 1 Circlip 15 162.475 6 Screw, sump 60 025.080 1 Sunwheel 16 025.112 1 Rear casing 61 172.231 1 Ring snap 17 025.111 1 Annulus 62 023.380 1 Cam 18 025.113 1 Bearing, planet 63 023.381 1 Key 19 025.114 1 Carrier, planet 64 172.229 1 Circlip 20 025.069 1 Thrust washer, free wheel inner to annulus 65 025.137 1 Dowel, spring, oil transfer pump 21 025.115 1 Inner member, free wheel 66 025.081 1 Body pump 22 025.035 12 Roller, steel 67 025.082 1 ‘0’ ring, body 23 025.034 1 Cage, free wheel 69 025.090 1 Plunger, pump 24 025.036 1 Spring, cage 70 025.091 1 Spring, pump plunger 25 025.067 1 Ring, case spring 71 025.092 1 Valve, non return-pump 26 025.068 1 Oil thrower 72 025.093 1 Plug, pump 27 025.116 1 Spring ring, mainshaft 73 025.083 1 ‘0’ ring, plug 28 025.117 1 Spacer 74 025.094 1 Tube, suction pump 29 025.118 1 Spacer, selective 75 025.136 1 Valve, relief and low pressure 30 025.124 1 Bearing 11/4” x2 3/4” xl 1/16” 76 025.084 1 ‘0’ ring 31 025.125 1 Bearing 30 x 62 x 16 mm 77 025.096 1 Filter, relief valve body 32 025.126 1 Oil seal, rear casing 78 025.085 1 ‘0’ ring 33 025.140 1 Flange, coupling 79 168.097 1 Washer, relief valve plug 34 024.141 1 Washer 80 025.097 1 Plug, relief valve 35 161.303 1 Nut 81 025.098 4 Washer, thrust rod 36 162.470 4 Special bolt, ‘D’ head 82 025.099 4 Rod, thrust 37 161.025 4 Self locking nut 83 025.138 4 Spring, clutch engagement 38 025.129 1 Bearing, speedometer 84 025.101 4 Spring, clutch release 39 016.050 1 Oil seal 85 172.232 4 Circlip, thrust rod 40 025.087 1 ‘0’ ring 86 025.102 2 Bridge piece 41 025.130 1 Lock plate, speedometer 87 174.016 4 Washer, tab 42 164.029 1 Lock washer, speedometer 88 025.103 4 Nut 43 162.029 1 Screw 89 025.104 1 Piston 90 025.105 1 ‘0’ ring

© Van Gestel B&C 2005 31 Automatic transmission

Part nr. 300.137 ATF oil

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 016.217 1 Gasket set 6 016.012 1 Oil seal, rear 11 174.029 4 LOCK PLATE 2 016.218 1 Oil pan gasket 7 011.163 1 Crankshaft bush 12 020.047 1 Convertor 3 016.219 1 Gasket, pump adaptor to convertor 8 011.164 1 plate crankshaft back, thin 13 083.430 2 Switch inhibitor or reverse lights support 011.165 1 Plate support, thick 14 101.159 1 Cable, KICKDOWN 4 016.220 1 Gasket, extension to case 9 174.007 1 LOCK PLATE 15 134.149 1 Cable, selector control 5 016.221 1 Oil seal, front pump 10 011.166 1 Starter ring 16 020.046 1 Automatic transmission assembly

32 © Van Gestel B&C 2005 Front suspension, part 1

See page 89 for Superflex bushes

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 042.305 2 Front, lower arm 19 161.277 4 Nut, 1/2” 34 041.032 4 Castle nut, 1/2” UNF 2 042.306 2 Rear, lower arm 20 164.011 4 Spring washer, 1/2” 35 167.066 4 Stud, pivot bracket 3 162.048 4 Bolt 21 041.300 4 Fulcrum pin, inner 36 174.026 4 Lock plate 4 161.025 4 Nut, nylon locking 22 041.301 2 Bush, torsion 37 162.081 4 Bolt 5 164.006 4 Washer, spring 048.164 2 Superflex polyurethane bush, torsion 38 161 … 4 Nut 6 042.307 2 Standard shock absorber, front 23 161.277 2 Nut 39 164 … 4 Washer, spring 042.308 2 “SPAX” front shock absorber 24 164.011 2 Spring washer 40 041.057 2 Pi n top 042.309 2 “KONI” adjustable shock absorber 25 042.310 2 Front top arm 41 041.056 2 Bush top trunion 7 041.293 2 Shock absorber bottom rubber 26 042.311 2 Rear top arm 041.511 2 Superflex polyurethane bush, 041.507 2 Superflex polyurethane 27 042.312 2 Pivot bracket top trunion bottom rubber 28 041.302 4 Shim pivot bracket, 2.59 mm 42 161.043 2 Nut 13 041.294 2 Shock absorber bottom pin 29 041.303 A/R Shim pivot bracket, 1.62 mm 43 041.306 2 Bump, rubber 14 041.295 2 Collar, split 041.304 A/R Shim pivot bracket, 0.9 mm 44 162.005 4 Screw, 5/16” UNF 15 041.296 2 Distance piece 30 041.305 4 Bush, top arms, wishbone 45 164.002 4 Washer, spring 16 041.297 2 Swivel pin, bottom 048.161 4 Superflex polyurethane bush, 46 041.325 2 Tie rod bush, front 17 041.298 2 Swivel pin bush, outer fulcrum top arms, wishbone 048.162 2 Superflex polyurethane tie rod bush, 048.166 2 Superflex polyurethane Swivel pin 31 163 … 4 Washer, inner front bush, outer fulcrum 32 163 … 4 Washer, outer 47 041.922 4 Superflex polyurethane bush, 18 041.299 4 Washer, king pin spacer 33 164.011 4 Washer, spring damper pin

© Van Gestel B&C 2005 33 Front suspension, part 2

See page 89 for Superflex bushes

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 042.313 2 Torsion bar 15 161.279 2 1/2” UNF FLAT NUT 27 161.032 2 Nut 2 041.573 1 RH lever, vernier 16 042.314 2 Tie-bar 28 164.021 2 Washer, spring 3 041.308 1 LH lever, vernier 17 162.276 2 Bolt 29 162.104 2 Bolt, link to anti-roll 4 041.309 2 Retaining plate 18 161.032 2 Nut 30 161.044 2 Nut 5 162.081 2 Bolt 19 164.021 2 Washer, spring 31 164.021 2 Washer, spring 6 161.012 2 Nut, self locking 20 041.312 4 Bush, tie-bar, rear 32 041.315 2 Bush, anti-roll bar 7 163.001 2 Washer, plain 048.163 4 Superflex polyurethane bush, 048.165 2 Superflex polyurethane bush, 8 164.002 2 Washer, spring tie-bar, rear anti-roll bar 9 041.310 2 Block, adjustment 21 041.313 2 Retaining bush 33 041.316 2 Strap for bush 10 041.311 2 Plate, reinforcement 22 041.314 2 Nut and washer, tie-bar 34 162.005 4 Screw, 5/16” UNF x 3/4” 11 162.069 4 Bolt 23 041.032 2 Castle nut 35 164.002 4 Washer, spring 12 164.006 4 Washer, spring 24 042.315 1 Bar assembly anti-roll 36 041.317 2 Upper locator 13 161.026 4 Nut 25 041.062 2 Bush, anti-roll bar 37 041.318 2 Lower locator 14 162.428 2 Bolt, vernier 26 042.316 2 LINK, anti-roll bar 38 162.140 4 Screw 39 164.015 4 Washer, spring

34 © Van Gestel B&C 2005 Front suspension, part 3

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 042.299 1 RH axle assembly 15 041.288 1 RH top trunion 27 041.074 2 Collar for oil seal 2 042.300 1 LH axle assembly 16 041.289 1 LH top trunion 28 041.075 2 Oil seal 3 041.282 2 Bush top (included in king pin kit) 17 041.290 2 Pad reactor, (king pin top nut) 29 041.076 2 Oil seal and bearing kit 4 041.283 2 Bush bottom 18 174.025 2 Plate locking, pad reactor 30 041.291 2 Spacer for bearing (included in king pin kit) 19 042.302 1 RH steering lever 31 041.078 A/R Shim .076 mm 5 042.301 1 KING PIN KIT, for 2 sides 20 042.303 1 LH steering lever 041.079 A/R Shim. 1 26 mm 7 041.284 4 Ring sealing 21 162.106 4 Bolt 041.080 A/R Shim .254 mm 10 041.285 2 Top tube, dust excluder 22 042.304 2 Hub for disc wheels 041.081 A/R Shim.7 64 mm 11 041.286 2 Spring, dust excluder 23 167.033 10 Stud for disc wheels 33 041.292 2 Washer, retaining 12 041.287 2 Bottom tube, dust excluder 24 161.046 10 Nut for disc wheels 34 041.093 2 Nut, captive 13 041.066 2 Lubricator, top 25 042.124 1 RH wire wheel hub 35 041.017 2 Cap, disc wheels 14 041.068 2 Lubricator, bottom 26 042.125 1 LH wire wheel hub 36 041.082 2 Cap, wire wheels

© Van Gestel B&C 2005 35 Clutch & hydraulics

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 027.086 1 Clutch pedal 19 163.001 1 Washer, plain 37 054.124 1 LHD, clutch pipe (132 cm) 2 027.087 1 Clutch pedal, USA 20 164.002 1 Washer, spring 054.125 1 RHD, clutch pipe (69 cm) 3 027.088 2 Bush 21 161.002 1 Nut 38 052.171 1 Banjo 4 027.001 1 Pedal rubber 22 162.088 1 Bolt 39 052.015 1 Banjo bolt 5 027.089 1 Tube, distance 23 164.002 1 Washer, spring 40 168.014 1 Washer, gasket 6 171.003 1 Spring, pedal 24 161.001 1 Nut 41 168.010 1 Washer, gasket 7 172.045 1 Clevis pin 25 133.510 1 Spacer 42 172.042 1 (RHD only) clip, pipe to body 8 163.001 1 Washer, plain 26 027.064 1 Slave cylinder assembly 43 163.008 1 Washer, plain 9 053.069 1 Clutch master cylinder 27 052.167 1 Piston 44 133.511 1 Bracket, clutch hose 10 052.159 1 Plunger 28 052.168 1 Spring 45 027.092 1 Clutch hose 11 052.160 1 Valve spacer 29 052.169 1 Piston retainer 46 168.014 1 Washer, gasket 12 052.161 1 Retainer, spring 30 052.078 1 Bleed screw 47 161.009 1 Lock nut 13 052.162 1 Push rod 31 027.090 1 Repair kit, slave cylinder 48 172.074 1 Plate, locking 14 052.163 1 Filler cap 32 027.091 1 Push rod 49 164.025 1 Lock washer 15 052.164 1 Stem 33 172.089 1 Clevis pin 50 052.117 1 Rubber grease 16 052.165 1 Spring 34 163.001 1 Washer, plain 51 053.018 A/R 1 L. Silicone brake fluid 17 052.166 1 Washer 35 162.103 2 Bolt, UNC 52 053.039 A/R 1 L. Dot 4 brake fluid 18 052.072 1 Repair kit 36 164.006 2 Washer, spring

36 © Van Gestel B&C 2005 Brake pedals

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 027.094 1 LHD and RHD, BRAKE PEDAL 13 164.011 1 Washer, spring 23 164.012 2 Washer, spring 2 027.095 1 RHD AUTOMATIC, BRAKE PEDAL 14 161.045 1 Nut 24 162.077 1 Screw, box to platform 3 027.096 1 LHD AUTOMATIC, BRAKE PEDAL 15 027.102 1 Distance piece, pedal fulcrum 25 163.011 1 Washer, plain 4 027.097 1 USA, BRAKE PEDAL 16 172.045 1 PIN, CLEVIS 26 164.012 1 Washer, spring 5 027.098 1 USA, RHD AUTOMATIC, BRAKE PEDAL 17 163.001 1 Washer, plain 27 133.522 1 Cover, master cylinder box 6 027.099 1 USA, LHD AUTOMATIC, BRAKE PEDAL 18 171.003 1 Spring 28 133.523 1 COVER, USA, WITH SWITCH ADAPTOR 7 027.088 1 Pedal bush 19 133.519 1 Pedal box 29 162.139 4 Screw 8 027.001 2 Pedal rubber, brake or clutch 133.520 1 Pedal box, BENELUX & FRANCE only 30 163.007 4 Washer, plain 9 027.100 1 Pedal rubber, automatic 133.521 1 Pedal box, USA 31 164.015 4 Washer, spring 10 027.089 1 Distance tube 20 162.077 2 SCREW, box to dash 32 121.194 1 Seal, box to body 11 027.101 1 Distance tube, automatic 21 161.019 1 Nut 33 121.195 1 Seal, cover to box 12 162.461 1 Bolt, pedal fixing 22 163.010 2 Washer, plain

© Van Gestel B&C 2005 37 Master brake pump - single

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 053.070 1 Master brake pump, UK 12 133.524 1 Block, reinforcing 24 052.181 1 Gasket, filler cap 2 052.161 1 Retainer, spring 13 167 … 2 Stud (not fitted when automatic) 25 133.525 1 Bracket, tank to bulkhead 3 052.177 1 Plugner 14 163.001 1 Washer, plain 26 162.060 2 Screw 4 052.165 1 Spring 15 164.002 1 Washer, spring 27 163.007 2 Washer, plain 5 052.164 1 Stem, valve 16 161.002 1 Nut 28 164.015 2 Washer, spring 6 052.175 1 Filler cap 17 162.088 1 Screw, master cylinder to box 29 162.139 1 Screw, bracket clamping 7 052.176 1 Gasket only 18 164.002 1 Washer, spring 30 164.017 1 Double spring washer 8 052.160 1 Spacer, valve 19 161.002 1 Nut 31 052.182 1 Hose, tank to pipe 9 052.178 1 Push-rod 20 133.510 1 Spacer, master cylinder to box 32 052.183 1 Pipe, hose to pump 10 052.174 1 Repair kit 21 053.072 1 plastic tank, brake fluid 33 172.049 2 Clamp, hose securing 11 053.071 1 Master brake pump, 22 052.179 1 Filler cap & gasket (incl. n° 23+24) 34 052.117 1 Rubber grease BENELUX & FRANCE 23 052.180 1 Baffle, fluid

38 © Van Gestel B&C 2005 Master brake pump - double

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 053.073 1 Master brake cylinder, USA 15 052.196 2 Nut, retaining 29 164.017 1 Washer, spring 2 052.186 1 Stem, valve 16 172.221 2 Circlip, retaining 30 052.182 2 Hose, tank to pump 3 052.187 1 Spacer, valve 17 052.185 1 Kit, repair 31 052.183 1 Pipe, hose to master cylinder (18 cm) 4 052.188 1 Spring, return, secondary plunger 18 162.072 2 Screw 052.184 1 Pipe, hose to master cylinder (8 cm) 5 052.189 1 Retainer, spring 19 164.006 2 Washer, spring 32 172.049 4 Clip, hose securing 6 052.190 1 Plunger, secondary 20 053.074 1 Tank assembly, brake fluid (plastic) 33 053.075 1 Master brake cylinder, 7 052.191 1 Spring, return, primary plunger 21 052.179 1 Cap, filler assembly NORTH AMERICA 8 052.192 1 Plunger, primary 22 052.180 1 Baffle, fluid 34 053.076 1 Reservoir 9 052.193 1 Push-rod 23 052.181 1 Gasket, filler cap 35 052.197 1 Filler cap & seal 10 172.220 1 Circlip, retaining, push-rod 24 133.525 1 Bracket, tank 36 052.198 1 Seal, filler cap 11 052.194 1 Retainer, tipping valve 25 162.060 2 Screw 37 052.199 1 Baffle, filler cap 12 052.195 1 Cover and adaptor, inlet 26 163.007 2 Washer, plain 38 052.117 1 Rubber grease 13 162 … 2 Screw, cover to body 27 164.015 2 Washer, spring 39 053.018 A/R 1 L silicone brake fluid 14 164 … 2 Washer, spring 28 162.139 1 Screw 40 053.039 A/R 1 L DOT 4 brake fluid

© Van Gestel B&C 2005 39 Girling servo’s

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 053.077 1 SERVO ASSEMBLY 14 052.214 1 Seal, air filter to body 27 161.002 A/R NUT 5/16” UNF (Oct. ‘67 till March ‘68) 15 052.215 1 Air filter cover 161.019 A/R NUT 1/4” UNF 2 052.202 1 Piston, valve operating 16 023.277 1 Ban 28 163.001 A/R WASHER PLAIN, 5/16” 3 052.203 1 Abutment, piston spring 17 053.079 1 REPAIR KIT SERVO 163.010 A/R WASHER PLAIN, 1/4” 4 052.204 1 Spring, piston return 18 052.216 1 Air valve repair kit 29 164.002 A/R WASHER SPRING, 5/16” 5 052.205 1 Retainer, spring 19 052.217 1 Varve, non return (ear(y typeJ 164.012 A/R WASHER SPRING, 1/4” 6 052.206 1 Circlip, retainer 20 052.200 1 Bolt for valve 30 162.056 3 SCREW 3/8” UNF x 3/4” 7 052.207 1 Spring, piston return 21 168.094 1 Gasket, valve 31 164.006 3 WASHER SPRING 8 052.208 1 Spring, piston 22 053.080 1 SERVO ASSEMBLY (March ‘68 - on) 32 052.201 1 Valve, non return 9 053.078 1 PISTON and ROD Assembly 23 132.333 1 LHD, SERVO SUPPORT BRACKET 33 053.081 1 Servo repair kit 10 052.209 1 Bush, piston rod guide 24 132.334 1 RHD, SERVO SUPPORT BRACKET 34 052.218 1 Sleeve, rubber 11 052.210 1 Spring, cylinder return 25 121. 196 1 Seal, under servo bracket 35 052.219 1 Adaptor 12 052.211 1 Spring, control valve return 26 162.005 A/R Screw 5/16” UNF x 3/4” 36 052.220 1 Grommet for adaptor 13 052.212 1 AIR FILTER KIT, (incl. n° 14, 15) 162.077 A/R Screw 1/4” UNF x 3/4” 37 052.221 1 Band, crimping 052.213 1 Air filter, element only

40 © Van Gestel B&C 2005 Lockheed servo systems

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 053.082 A/R LOCKHEED SERVO ASSEMBLY 8 162 … 5 Screw, cover to housing 20 132.335 1 Conversion bracket to fit a lockheed NOT ORIGINAL BUT THE PERFECT 9 052.227 1 Push-rod on a girling installation ALTERNATIVE FOR REPLACING THE 10 052.228 1 Spacer 21 054.105 1 1 meter servo vacuum hose, GIRLING SERVO. PLEASE ALSO USE 11 052.229 1 Bearing 1/4” I.D. OUR SPECIAL CONVERSION 12 052.230 1 Plate, abutment 22 052.235 1 ‘Y’ piece, vacuum hose BRACKETS (See below) 13 162 … 3 Screw, shell to body 23 172.151 A/R Hose clips, 3/4” x 3/16” 2 052.222 1 Piston, valve air 14 052.231 1 Spring, vacuum piston return 172.152 A/R Hose clips, 3/4” x 1/4” 3 052.223 1 Housing, lower, air control valve 15 053.083 1 Piston, vacuum 172.153 A/R Hose clips, 3/4” x 5/16” 4 162 … 3 Screw, housing to body 16 052.232 1 Key, piston to push-rod 172.154 A/R Hose clips, 7/8” x 3/16” 5 052.224 1 Support, diaphragm 17 052.233 1 Pipe, valve cover to end cover 172.155 A/R Hose clips, 7/8” x 1/4” 6 052.225 1 Diaphragm, air control valve 18 052.234 1 Valve, non return 172.156 A/R Hose clips, 7/8” x 5/16” 7 052.226 1 Cover, air control valve 19 053.084 1 SERVO REPAIR KIT

© Van Gestel B&C 2005 41 Brake pipes and hoses

42 © Van Gestel B&C 2005 Brake pipes and hoses

Part nr. 200.813 Flaring tool This professional flaring tool is of a very high quality and is suitable for both Part nr. 3/16” and 1/4” 054.401 pipes. Made in England 5 meters copper/nickel brake pipe, 3/16”

Part nr. 052.405 Female union 3/8” UNF for 3/16” pipe

Part nr. 052.406 Male union 3/8” UNF for 3/16” pipe

Part nr. 052.242 Part nr. In-line connector, male 200.737 3/8” x 3/8” UNF Bending tool Part nr. The best tool for bending 052.243 your brake pipe set etc. In-line connector, female 3/8” x 3/8” UNF

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 054.127 1 LHD, SINGLE SYSTEM BRAKE PIPE SET 15 052.238 1 Repair kit, pressure failure switch (to G-CN1-5962) 054.128 1 LHD, DOUBLE SYSTEM BRAKE PIPE SET 052.239 1 Repair kit, pressure failure switch (from G-CN1-5963) 054.129 1 RHD, SINGLE SYSTEM BRAKE PIPE SET 16 083.413 1 WARNING SWITCH 2 054.130 2 FRONT BRAKE HOSE 17 023.277 1 BALL, SWITCH OPERATING 3 054.077 1 REAR BRAKE HOSE 18 052.240 1 Connection 3 way (rear axle) 4 168.014 1 GASKET rear brake hose 19 133.529 1 Bracket 5 172.074 5 LOCKING plate 20 133.530 1 Bracket, pipe protection 6 164.025 5 Star washer 21 172.071 3 Strap, brake pipe to rear axle 7 161.009 5 LOCK NUT 22 052.241 1 Union connection - large, 7/16” 8 052.236 1 Connector 5 way (early) G-CN1-101 to 1968 23 164.033 1 Washer lock 052.237 1 Connector 5 way G-CN1-1969-on 24 161.298 1 LOCKING NUT 9 168.014 1 Gasket, fitted on early type only! 25 052.242 1 Union connection - small, 3/8” 10 083.412 1 STOP SWITCH (early), to be used with gasket 26 164.025 1 Washer lock 084.004 1 STOP SWITCH WITH CONE THREAD 27 161.009 1 Locking nut 11 163.035 1 Spacer 28 172.073 A/R Clip, single pipe 3/16” - 3/16” screw 12 083.313 1 Switch stop light, fitted on pedal box cover 172.063 A/R Clip, single pipe 3/16” - 1 /4” screw 13 161.009 1 LOCKING NUT 172.042 A/R Clip, single pipe 3/16” - 5/16” screw 14 053.085 1 Pressure failure switch (to G-CNl-5962) 29 172.072 A/R Clip, dual pipe 3/16” - 3/16” screw 053.086 1 Pressure failure switch (from G-CNl-5963) 30 172.222 3 Clip, brake pipe to clutch hose bracket 31 172.223 2 Clip, pipe to LH front hose 32 172.224 1 Clip, pipe to RH front valance

© Van Gestel B&C 2005 43 Rear brakes - hand brake

44 © Van Gestel B&C 2005 Rear brakes - hand brake

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 053.087 2 Wheel cylinder assembly 34 054.055 1 Spring 2 052.084 2 Plate, wheel cylinder retaining 35 054.056 1 Grip, handle 3 052.085 2 Spring plate retaining 36 054.058 1 Handle 4 052.251 2 Dirt excluder 37 054.059 1 PAWL 5 052.247 1 RH adjuster 38 163.011 1 Washer 052.248 1 LH adjuster 39 054.060 2 Washer on spindle 6 052.252 2 Brake shoe return spring, abutment end 40 054.061 1 Plate, ratchet 7 052.253 2 Brake shoe return spring, cylinder end 41 162.136 3 Screw, handbrake handle to tunnel 8 052.254 2 Plate, brake shoe support 42 054.062 1 Lever, operation 9 052.258 1 KIT, BRAKE SHOE FIXING (INCL. 4 x 052.255/6/7) 43 163.005 1 Washer 052.255 4 Washer, cup 44 161.025 1 Self locking nut 10 052.256 4 Spring 45 054.051 1 GROMMET cable protection 11 052.257 4 Pin, shoe steady 46 054.052 1 Cable clamp, to battery box 12 053.089 1 Brake shoe lining kit (4 pieces), incl. rivets 48 163.010 1 Washer, plain 053.088 1 Brake shoe assembly set (4 pieces) 49 164.012 1 Washer, spring 13 050.061 2 Brake drum 50 161.019 1 Nut 14 162.058 4 Screw 51 133 … 1 Bracket, cable to tunnel shaft 15 052.029 2 Plug 52 161.024 1 Nut 16 052.249 1 RH lever, operating 53 163.010 1 Washer, plain 052.250 1 LH lever, operating 54 054.038 1 Spring 17 052.246 2 Retaining clip, dust cap 55 163.011 1 Washer, plain 18 052.028 2 Screw, bleed 56 054.036 1 T runion cable 19 052.245 2 Dust cap, bleed screw 57 054.037 1 Nut, cable adjusting 20 052.244 1 Repair kit for 2 wheel cylinders 58 054.040 1 Clamp, cable to 3 way 21 052.117 1 Rubber grease 59 162.047 1 Screw 22 050.059 1 RH base plate 60 164.015 1 Washer, spring 050.060 1 LH base plate 61 161.024 1 Nut 23 162.122 8 Bolt 62 054.029 1 Lever, inner 24 161.078 8 Locking nuts 63 054.030 1 Lever, outer 25 134.063 1 Handbrake cable (when disc wheels are fitted) 64 054.031 1 Bush 134.064 1 Handbrake cable (when wire wheels are fitted) 65 054.028 1 Fulcrum, bolt 26 054.132 1 Handbrake cable adjusting kit 66 163.008 1 Washer, plain 27 054.133 1 Lever assembly 67 161.021 1 Nut, self locking 28 054.134 1 Fastener kit, cable to battery box 68 163.009 2 Washer, plain 29 054.135 1 Fastener, cable to 3 way connector 69 164.014 1 Washer, anti-rattle 30 054.039 2 Clevis pin 70 161.010 1 Nut 31 054.057 1 Complete handbrake handle 71 162.029 1 Screw 32 054.053 1 KNOB 72 164.012 1 Washer, spring 33 054.054 1 Rod 73 161.019 1 Nut

© Van Gestel B&C 2005 45 Brake calliper and brake disc

ILL N° PART N° QT DESCRIPTION ILL N° PART N° QT DESCRIPTION ILL N° PART N° QT DESCRIPTION

1 050.043 2 Brake disc 6 052.157 1 Seal kit ‘16 P’ for two callipers 13 162.463 10 Bolt, disc to hub 050.262 2 Brake disc, drilled 052.259 1 Seal kit ‘16 PB’ for two callipers 14 164.006 10 Washer, spring 050.306 2 Brake disc, Groove type 7 053.061 4 Piston for ‘16 P’ type 15 161.026 10 Nut 2 053.066 1 Brake pad set (4 pieces) 053.090 4 Piston for ‘16 PB’ type 16 050.066 1 RH dust cover 053.295 1 Brake pad set ‘Green Stuff’ (4 pieces) 8 052.264 2 DO NOT SEPARATE THE TWO PARTS 050.067 1 LH dust cover 3 052.260 1 Securing pin & clip set FROM YOUR BRAKE CALLIPERS! 17 052.262 1 RH bracket for brake hose 4 052.261 1 Shim set (4 pieces) IF YOU HAVE DONE THIS, USE THESE 052.263 1 LH bracket for brake hose 5 050.062 1 RH ‘16 P’ brake calliper CHANNEL SEALS 18 162.462 2 Screw, dust cover 050.063 1 LH ‘16 P’ brake calliper 9 052.078 2 Bleed screw 19 164.012 2 Washer, spring 050.064 1 RH ‘16 PB’ brake calliper 10 052.245 2 Dust caps, bleed screw 20 162.033 2 Screw, dust cover 050.065 1 LH ‘16 PB’ brake calliper 11 162.464 4 Bolt, calliper attachment 21 164.002 2 Washer, spring 12 174.027 2 Lock tab

46 © Van Gestel B&C 2005 Steering wheel and column

IIL N° PART N° QTY DESCRIPTION IIL N° PART N° QTY DESCRIPTION IIL N° PART N° QTY DESCRIPTION

1 042.328 1 Steering wheel, original 14 134.143 1 Outer column, when no steering 33 161.002 4 Nut (42 dia, leather covered) lock is fitted 34 043.110 2 Plate for coupling 2 161.022 1 Nut, steering wheel 134.144 1 LHD outer column, when a steering 35 043.111 1 Coupling 3 083.074 1 Steering wheel centre boss + horn push lock is fitted 36 043.112 1 Earth wire 4 162.466 3 Securing screws 134.145 1 RHD outer column, when a steering 37 043.026 1 UNIVERSAL JOINT 5 185.026 1 MOTO-LITA, steering wheel, 35 dia lock is fitted 38 042.330 1 MGC, NORTH AMERICA, Steering wheel Wood (see page 90 for more choice) 15 133.072 1 Bracket (42 dia, leather covered) 185.156 1 MOTO-LITA, steering wheel, 35 dia 16 133.073 1 Blanking plate 39 161.273 1 Nut, steering wheel Leather (see page 90 for more choice) 17 164.002 2 Spring washer 40 083.378 1 Steering wheel motif, centre 6 185.082 1 MOTO-LITA, steering wheel boss + cap 18 161.002 1 Nut 41 172.016 4 Clips, motif clamping 7 083.075 1 Slip ring 19 162.073 2 Bolt 42 185.026 1 MOTO-LITA, steering wheel, 35 dia 8 083.076 1 Rotor assembly 20 043.009 2 Distance piece Wood (see page 90 for more choice) 9 043.062 1 Column top bush, nylon 21 163.001 4 Washer,plain 185.156 1 MOTO-LITA, steering wheel, 35 dia 10 043.058 1 Column bottom bush, felt 22 043.010 2 Clamp Leather (see page 90 for more choice) (when steering lock is not fitted) 23 164.002 2 Washer, spring 43 185.089 1 MOTO-LITA, STEERING WHEEL, 043.070 1 Column bottom bush, felt 24 161.002 2 Nut hub and centre cap (when steering lock is fitted) 25 043.108 1 Steering lock assembly less ignition (North America specifications) 11 043.069 1 Clip, retaining switch 44 134.146 1 North America steering wheel column 12 121. 197 1 Draught excluder, steering column 26 083.370 1 Switch, ignition 45 043.094 1 Top bush, nylon 13 134.140 1 Inner column, when no steering 27 043.109 1 Joint assembly, universal 46 043.095 1 Bottom bush, nylon lock is fitted 28 162.081 1 Bolt, clamping 47 121.198 1 Seal, draught excluder 134. 14 1 1 LHD inner column, when a steering 29 164.002 1 Washer, spring 48 043.100 1 Steering column lock and ignition switch lock is fitted 30 161.002 1 Nut 49 083.371 1 Switch ignition 134.142 1 RHD inner column, when a steering 31 162.008 4 Bolt 50 162.401 1 Screw, switch retaining lock is fitted 32 164.002 4 Washer, spring 51 162 … 2 Bolt, shear

© Van Gestel B&C 2005 47 Steering rack

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 042.331 1 LHD steering rack assembly 14 043.119 2 LOCK NUT 26 043.060 1 Oil seal, pinion side 042.332 1 RHD steering rack assembly 15 043.120 1 Yoke, rack support 27 043.122 2 Tie rod 2 043.126 1 Rack seals and clip set 16 163 … 1 Washer 28 043.047 2 Ball, seating 3 043.124 2 Boot seal 17 043.048 1 Spring 29 043.048 2 Spring 4 172.129 1 Clip, large 18 043.051 A/R Shim 0.0609 mm 30 043.123 2 Housing, ball 5 172.226 1 Clip, large, pinion side 043.052 A/R Shim 0.127 mm 31 043.063 1 Bearing, pinion 6 172.225 2 Clip, small 043.053 A/R Shim 0.254 mm 32 043.121 1 Washer, plain 7 043.043 2 Socket ball assembly 19 043.050 1 Plate, cover 33 161 … 1 Nut, bearing retainer 8 161.053 2 LOCK NUT 20 164.002 2 Washer, spring 34 043.066 1 Gasket, end cover 9 161.079 2 Nut, nylon locking 21 162.086 2 Screw, UNC 35 043.067 1 End plate 10 043.029 2 Boot, dust 22 043.113 1 LHD housing 36 164.002 2 Washer, spring 11 043.125 2 Retainer boot, small 043.114 1 RHD housing 37 162.085 2 Bolt 12 172.124 2 Retainer boot, big end 23 162.467 1 Screw, retaining 13 043.117 1 LHD, RACK & PINION 24 043.116 1 DISC, backing 043.118 1 RHD, RACK & PINION 25 043.115 1 Bush, pinion

48 © Van Gestel B&C 2005 Rear suspension

See page 89 for Superflex bushes

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 042.060 1 RH rear shock absorber 9 041.086 2 Strap only 17 162.037 2 Bolt 042.062 1 LH rear shock absorber 10 032.196 A/R Repair shaft, axle strap fixing 18 041.089 2 Bush, supplied with spring 2 042.028 2 Link, shock absorber to spring 11 041.091 1 RH bracket, spring to link 041.513 2 Superflex polyurethane bush 3 042.333 2 Bolting kit, one shock absorber 041.092 1 LH bracket, spring to link 19 164.021 2 Washer, spring to chassis 12 041.090 4 Plate, lockating 20 161.032 2 Nut 4 042.521 1 SPAX rear shock absorber kit 13 041.047 4 Pad, spring 21 041.043 2 SHACKLE, pins on plate 5 042.390 2 SPAX shock absorber 041.515 4 Superflex polyurethane pad, spring 22 041.044 8 Bush 6 042.168 2 MGC, Roadster, rear spring 14 041.088 4 ‘U’ bolt, normal size 041.514 8 Superflex polyurethane bush 042.169 2 MGC GT, rear spring 041.326 4 ‘U’ bolt, longer size (for SPAX etc.) 23 041.045 2 Shackle plate 7 041. 150 1 Complete mounting kit, for 2 sides 15 041.085 2 Pedestal 24 164.006 4 Washer, spring 8 042.334 2 Kit, axle strap & mountings 16 041.083 2 BUMP STOP RUBBER 25 161.026 4 Nut 26 161.025 8 Nut

© Van Gestel B&C 2005 49 Rear axle

50 © Van Gestel B&C 2005 Rear axle

Wire wheel conversion with bolt-on hub (rear) Part nr. 032.458 1 RH rear hub

Part nr. 032.459 1 LH rear hub

AXLE ASSEMBLY, LESS BRAKE INSTALLATIONS

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 030.030 1 Disc wheels, 14/43 teeth (3.071: 1 ratio) CROWN WHEEL (WITH PINION) 030.031 1 Disc wheels, 13/43 teeth (3.307: 1 ratio) 25 032.200 1 14/43 teeth (3.071: 1 ratio) 030.035 1 Disc wheels, 10/37 teeth (3.7: 1 ratio) 032.201 1 13/43 teeth (3.307: 1 ratio) 2 030.032 1 Wire wheels, 14/43 teeth (3.071: 1 ratio) 032.070 1 10/37 teeth (3.7: 1 ratio) 030.033 1 Wire wheels, 13/43 teeth (3.307: 1 ratio) 26 032.071 8 Bolt, crown wheel to cage 030.036 1 Wire wheels, 10/37 teeth (3.7: 1 ratio) 3 030.019 1 Disc wheel, case assembly WASHER, PINION THRUST 030.020 1 Wire wheel, case assembly 27 032.084 1 .222” (5.64 mm) 4 162.468 4 Bolt, bearing cap 032.085 1 .220” (5.59 mm) 5 161.026 2 Nut 032.087 1 .214” (5.44 mm) 6 162.034 1 Plug, drain 032.088 1 .212” (5.39 mm) 7 162.034 1 Plug, filler 032.089 1 .210” (5.33 mm) 8 032.068 1 Cover, axle case 28 031.011 1 Bearing, pinion, inner 9 016.064 1 Washer, joint, axle case 29 032.090 1 Spacer, bearing 10 162.033 8 Bolt 30 031.012 1 Bearing, pinion, outer 11 162...... 2 Bolt, clip and cover 31 031.013 1 Seal, oil 12 164.002 10 Washer, spring 32 032.091 1 Cover, dust 13 133.513 1 Bracket, compensating lever 33 032.202 1 Flange, universal joint 14 162.121 2 Bolt, bracket 34 161.052 1 Nut 15 164.002 2 Washer, spring 35 032.093 1 Washer, plain 16 030.040 1 Cage, differential 36 030.021 2 Disc wheel, shaft, axle 17 032.197 2 Wheel differential (RA) 101 to 744 Disc wheels 030.022 2 Wire wheel, shaft, axle 032.082 2 Wheel differential 37 032.099 2 Spacer, bearing 18 032.008 2 Washer, thrust, wheel 38 031.015 2 Bearing 19 032.004 2 Pinion, differential (RA) 101 to 744 Disc wheels 39 032.089 2 Cap, hub bearing 032.198 2 Pinion, differential 40 031.014 2 Seal, oil 20 032.007 2 Washer, thrust, pinion 41 032.097 2 Collar, oil seal 21 032.199 1 Pin, pinion 42 032.203 2 Disc wheel, flange, driving 22 032.083 1 Roll-pin 43 167.036 8 Disc wheel, stud, wheel 23 031.010 2 Bearing, differential 44 161.046 8 Disc wheel, nut, wheel stud 45 032.104 1 Wire wheel, flange, driving, RH COLLAR, DISTANCE 032.458 1 Conversion hub, RH 24 032.072 2 .149” (3.784 mm) 46 032.10S 1 Wire wheel, flange, driving, LH 032.073 2 .147” (3.734 mm) 032.459 1 Conversion hub, LH 032.074 2 .143” (3.632 mm) 47 167.033 10 Wire wheel, stud 032.075 2 .141” (3.581 mm) 48 161.065 10 Wire wheel, nut, drum to flange 032.076 2 .135” (3.429 mm) 49 032.096 2 Collar, drive shaft 032.077 2 .129” (3.277 mm) 50 032.095 2 Nut, drive shaft 032.078 2 .125” (3.175 mm) 51 300.113 2 Oil for rear axle 1 L. 032.079 2 .123” (3.124 mm) 52 032.196 A/R Repair shaft 032.080 2 .117” (2.972 mm)

© Van Gestel B&C 2005 51 Wheels

52 © Van Gestel B&C 2005 Wheels

Part nr. 046.163 ‘D’ Type style wheel 15” x 6” alloy wheel

Part nr. 046.062 15” x 6” Alloy wheel

Part nr. 046.024 Centre lock alloy wheel 15” x 6”

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 046.023 5 Wire wheel, chrome plated, 72 spokes, 5 1/2 x 15” 12 141.352 4 Chrome hub cap 046.022 5 Wire wheel, painted silver, 72 spokes, 5 1/2 x 15” 13 046.046 5 Wheel, rostyle 046.021 5 Wire wheel, chrome plated, 72 spokes, 5 x 15” 14 161.296 20 Wheel nut, chrome plated 046.020 5 Wire wheel, painted silver, 72 spokes, 5 x 15” 15 141.040 4 Hub cap, rostyle 2 169.029 A/R Spoke and nipple, short, bare metal 16 141.041 A/R Badge “MG” for hub cap 169.030 A/R Spoke and nipple, long, bare metal 17 187.013 A/R Spray, primer on metal 169.031 A/R Spoke and nipple, short, chrome plated 187.004 A/R Spray, Silver paint 169.032 A/R Spoke and nipple, long, bare metal 187.002 A/R Spray, black paint 3 046.024 5 Centre locking, alloy wheel 18 133.143 1 Wheel clamp, wire wheel only 4 042.075 2 RH, 2 eared, MG creasted 19 133.596 1 Wheel clamp, disc wheel only 042.076 2 LH, 2 eared, MG creasted 20 133.59 7 1 Wheel clamp, rostyle wheel only 5 042.071 2 RH, 2 eared 21 132.102 1 JACK assembly 042.072 2 LH, 2 eared 22 153.056 1 Toolbag 6 042.079 2 RH, continental style 23 133.140 1 Lever, hub cap remover 042.080 2 LH, continental style 24 200.662 1 Spanner box, sparking plug 7 186.034 1 1/2 KGR. COPPER GREASE, for hubs and spinners 25 200.655 1 Tommy bar, box spanner 8 187.012 1 Silicone spray, to protect your chrome wire wheels 26 133.141 1 Spanner, octagonal style 9 185.050 1 Wire wheel cleaning brush 27 133.142 1 Spanner, wheel nut 161.046 10 046.045 5 Wheel, disc type 200.663 1 Spanner, wheel nut 161.296 11 161.046 20 Nut for disc wheel 28 042.097 1 Hammer, copper-hide

© Van Gestel B&C 2005 53 Electrics

54 © Van Gestel B&C 2005 Electrics

Quality ignition products for your classic Originaly for Neg. earthed cars, ask Optronic for wiring info when Pos. earthed Magnetronic ignition system To replace contact breakers and condensers ignition system Lumenition is proud to present the NEW Magnetronic Ignition System. Designed to Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally replace troublesome points with a simple drop in installation. Each unit comes complete, fitted with mechanical distributors using contact points. The advantage of the Lumenition ready to fit straight into your existing distributor. You will notice that your car will start system is that it contains no wearing parts, requires no adjustment or maintenance during Part nr. immediatly, have better fuel consumption, and increased performance. The Magnetronic service and once ignition timing is set it will remain permanently tuned. The engine will 086.082 Ignition System is suitable for most Lucas distributers, NEGATIVE EARTH and with or start better, last longer and run more economically through improved efficiency. There are without vacuum advance. Power supply module only three components, very compact and simple to fit. The benefits of the Magnetronic are: it is quick & easy to fit, completely self contained System with within the distributor and is a two wire connection. mechanical distributor and contact points. Module bracket for classics The unit is housed in a solid die-cast dissipating • Professional installation body which is • No new holes required Ask your local unaffected by • Uses coil mounting bolts distributor wear Part nr. Lumenition, For use with Optronic Anglo-Parts and gives all 086.081 no wearing parts and Performance shop for more the advantages & allways perfect associated with our Fitting kit for distributor timing. module information Ignition Systems. Part nr. NEGATIVE EARTH ONLY! 086.579

Also available: alternative: Lightweight and very powerful startermotor, see page 87

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 081.1 72 1 Distributor assembly, 25D6 33 082.029 1 Starter motor assembly E.C.M. CURVE 888, RANGE 13° -15° SUCTION 2-6-3 082.149 1 Modern replacement starter motor 2 081.163 1 Cap 34 081.157 1 Solonoid 3 081.161 1 ROTOR ARM 35 081.159 1 Drive end 4 081.017 1 Condensor 36 081.178 1 Bush, drive end side 5 081.016 1 Contact set 37 081.179 1 Bush, rear side 6 081.052 1 Earth lead 38 081.074 1 BRUSH set 9 081.049 1 Terminal bush & lead 39 081.158 1 Spring set 11 081.336 1 Spring set, assortment of 5 pieces 40 082.030 1 Original alternator to be used with “4TR” control box 12 081.763 1 Screw and washer kit (16AC TYPE, plastic half section) 14 081.176 1 Vacuum unit 082.010 1 Alternative alternator (ACR TYPE) These alternators should be used 15 081.061 1 ‘0’ ring together with our 081.180 socket conversion kit. 16 081.021 1 Clamp 41 081.180 1 Socket conversion kit, will fit all 16ACR TYPE AL TERNA TORS 17 162.132 1 Bolt 42 084.152 1 Control box “4TR”, for 16AC alternator only! 18 LUMENITION OPTRONIC IGNITION originally Negative Earth, ask info for positive earth! 43 083.117 1 Fuse box This is an electronic ignition conversion principally for cars originally fitted with mechanical 44 083.118 1 Cover distributors using contact breaker points and condensor. The advantage is that it contains no 45 084.005 1 Fuse set, 35 AMP wearing parts, requires no adjustment or maintenance and once ignition timing is set it will 46 081.181 1 Pulley fixing kit: key, nut, spring, washer remain permanently in tune. 47 081.182 1 Fan, alternator (all types) 086.081 1 Rotor for 22D, 23D, 25D, 31D 48 081.184 1 Pulley, alternator (all types) 086.082 1 Power module, OPTRONIC, photo transistor 49 081.185 1 BRUSH SET, 16AC TYPE LUMENITION MAGNETRONIC IGNITION 1 BRUSH SET, 16ACR TYPE 086.579 1 only Negative Earth, see top of this page! 50 081.187 1 Bearing, drive end 081.188 1 Bearing, slip end 19 082.003 2 6 VOLT BATTERY DRY CHARGED 51 133.558 1 Adjusting link 082.159 2 6 VOLT BATTERY in black rubber casing, DRY CHARGED 52 163.008 1 Washer, plain 21 133.555 2 Complete battery fixing kit (for one battery) 53 164.002 1 Washer, spring 22 081.036 4 Battery bolt 54 081.026 1 Screw, UNC 23 081.038 4 Pad, under battery 55 133.559 1 Pillar, adjusting link 24 081.039 2 Pad, under battery clamp 56 133.560 1 Ring, tolerance, pillar 25 081.040 2 Battery clamp 57 163.008 1 Washer, plain 26 161.061 4 Self locking nuts 58 164.002 1 Washer, spring 27 133.556 2 6 Volt battery top plate, an alternative for 081.040 59 161.002 1 Nut 28 081.177 1 Vacuum pipe, metal 60 162.129 1 Bolt, long 081.091 1 1 meter vacuum pipe, black plastic 61 163.008 1 Washer, plain 29 081.064 1 Connector, straight 62 162.081 1 Bolt, rear 30 081.092 1 Connector, 90° 63 041.087 1 Spacer, cut to length! 31 172.248 2 Clip, vacuum pipe 64 163.001 1 Washer, plain 32 133.557 1 Bracket, vacuum pipe 65 161.012 1 Nylon insert locking nut

© Van Gestel B&C 2005 55 Dashboard components - European

56 © Van Gestel B&C 2005 Dashboard components - European

Part nr. 150.895 These dashboards are made from a thin layer of walnut verneer on a sturdy backplate with multiple layers of gloss varnish. They are made to stick on the existing dashboard without having to screw or make holes. Applying these dashboards is easy and the finish magnificent.

IIL N° PART N° QTY DESCRIPTION IIL N° PART N° QTY DESCRIPTION

1 083.066 2 Shield, flasher warning 45 083.096 2 Strap fixing 2 083.067 2 Window, flasher warning 46 172.020 1 Clip 3 083.068 2 Tube, lamp 47 134.030 1 Pipe, oil pressure 4 083.069 1 Bracket 48 083.097 1 Grommet 5 083.070 1 Cowling indicator switch LHD 49 083.001 1 Connector, pipe 6 162.137 4 Screw 50 162.065 1 Screw 7 083.072 1 Direction indicator 51 164.012 1 Washer, spring 083.073 1 Repair kit, spring with bush 52 163.035 1 Spacer, screw 8 083.074 1 Horn push assembly 53 083.098 1 Pipe, flexible 10 083.075 1 Slip-ring 54 172.062 1 Clip 11 083.076 1 Rotor assembly 55 162.060 1 Screw 12 083.394 2 Switch, courtesy light 56 164.015 1 Washer, spring 13 162.494 4 Tap screw 57 172.063 1 Clip 14 083.438 1 GT, heated backlight switch 58 172.064 1 Bracket, retaining-pipe 16 083.079 1 Unit flasher 59 083.441 1 Speedometer KPH, SN6144/11 17 163.013 1 Washer, plain 083.442 1 Speedometer KPH, SN6144/12 Germany 18 162.138 1 Screw 083.443 1 Speedometer KPH, SN6144/32 Overdrive 19 083.080 1 Headlamp dimmer 083.444 1 Speedometer MPH, SN6144/1 0 20 162.139 2 Screw 083.445 1 Speedometer MPH, SN6144/31 Overdrive 21 162.140 2 Screw 60 083.439 1 Rubber ring & seal kit, to serve all gauges. For each gauge are 3 seals, to 22 164.015 2 Washer, spring mount glass and bezel to gauge body and body to fascia panel 23 083.081 1 Bracket 61 083.434 2 2” chrome ring 24 162.141 2 Screw 62 172.066 1 Clamp, fixing 25 163.013 2 Washer, plain 63 164.015 4 Washer, spring 26 164.015 2 Washer, spring 64 161.057 4 Nut 27 161.047 2 Nut 65 083.446 1 Tacho,RV12619/00 28 083.082 1 Switch, overdrive control 083.447 1 Tacho, RV1 2630/00 29 085.015 1 Badge, normal-overdrive 66 172.065 2 Clamp, fixing 30 083.038 1 Switch, panel light 67 083.454 2 Glass, small, 2” 31 083.035 1 Barrel & key 68 083.455 2 Glass, large, 4” 32 083.083 1 Switch, ignition (less barrel & key) 69 083.456 2 4” chrome ring 33 083.084 1 Switch, lighting 71 134.026 1 Speedometer cable LHD, STD 127 cm 34 083.085 1 Switch lighting, pull type 083.007 1 Speedometer cable LHD, OlD 168 cm 35 083.086 1 Sigar lighter ass. 083.448 1 Speedometer cable LHD, AUTOMATIC 142 cm 36 083.087 1 Switch, wiper 72 122.004 1 Grommet 37 083.088 1 Switch, heater 73 162.049 2 Screw 38 083.089 1 Switch, gear illumination, automatic 74 164.015 2 Washer, spring 39 083.034 1 Switch, map lamp 75 161.024 2 Nut 42 083.421 1 Voltage stabilizer 76 083.020 1 Cover, lens 43 083.440 1 Gauge, fuel, BF 2226/00 77 083.019 1 Lens 44 083.432 1 Gauge temp. + oil press. GD 1301/19, Fahrenheit 78 084.071 1 Lamp seating 083.094 1 Gauge temp. + oil press. GD 1301/20, Centigrade 083.147 1 Gauge temp.+ oil press. GD 1301/21, cold, normal, hot

© Van Gestel B&C 2005 57 Dashboard components - USA

58 © Van Gestel B&C 2005 Dashboard components - USA

Part nr. 150.225 Dash pad assembly

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 150.225 1 DASH PAD ASSEMBLY 37 083.355 1 Spindle, extension 2 150.224 1 DASH REPAIR PIECE (top part only) 38 083.356 1 Housing, ignition switch 3 133.270 1 CONZOLL PANEL 39 083.035 1 Barrel and key 4 083.063 1 SET, BLANKING - RAPID HOLE 40 083.489 1 Pair steering cowls 5 083.016 1 BEZEL - CHROME 41 162.046 2 Screw, cowl 6 083.017 1 PLATE, BLANKING 42 162 … 2 Screw, cowl 7 083.018 1 Badge, -=MG=- 43 083.318 1 Switch, direction indicator, horn and headlamp dipper 8 172.021 2 CLIP 44 083.490 1 Striker, switch 9 172.022 2 PLATE, CLAMPING 45 083.322 1 Switch, windscreen wiper, washer and overdrive 10 083.342 1 Brake check light 46 083.086 1 Lighter assembly, cigar 11 084.127 1 Bulb 47 133.581 1 Control assembly, heat 12 083.349 1 Clip, spring 133.582 1 Control asembly, air 13 083.350 2 Clip, spring 48 172.058 2 Clip, for knob locking 14 083.345 5 Bezel & switch guide 49 172.059 2 Pin, for knob locking 15 083.339 1 Switch, lighting {original type} 50 063.076 1 KNOB, heat control 16 083.340 1 Switch & bezet lighting {alternative} 063.077 1 KNOB, air control 083.341 1 Switch & bezel, lighting illuminated {alternative} 57 161.320 1 Nut, tube distance 17 083.329 1 Switch,heater (original type) 58 163.012 4 Washer, plain 18 083.331 1 Switch & bezel, heater (alternative) 59 163.034 2 Washer, plain 19 083.477 1 Body, warning light, ignition, red 60 164.023 2 Washer, spring 083.478 1 Body, warning light, high-beam, blue 61 161.054 2 Nut 184.135 2 Bulb holder 62 083.468 1 Oil pressure gauge, BP 1200/02 084.126 2 Bulb 63 141.356 1 Chrome bezel, oil gauge 20 083.479 1 Warning light assembly, alternative, red 64 083.504 1 Gauge, temperature (electrical), BT 2218/00 083.480 1 Warning light assembly, alternative, amber 65 083.096 2 Clamp, gauge fixing 083.481 1 Warning light assembly, alternative, green 66 164.015 6 Washer, spring 083.482 1 Warning light assembly, alternative, blue 67 161.057 6 Nut 21 083.483 2 Window, direction indicator 68 083.101 2 ‘0’ ring 083.040 2 Window, plain green {alternative} 69 083.421 1 Voltage stabilizer 22 083.130 2 Shade, aluminium piece between bulb holder and window 70 083.505 1 Fu~gaug~BF2223/00 23 083.115 4 Bulb holder 71 083.507 1 Tachometer {RV1 1612/00} 24 084.123 4 Bulb 083.506 1 Tachometer (RV1 1613/00) 25 083.484 2 Shade 72 172.065 2 Clamp 26 083.485 1 Window, GT, heated backlight (OPAL LENS) 73 083.508 2 Ring, rubber 083.360 1 Window, hazard warning (RED LENS) 74 083.501 1 Speedometer, MPH {SN 5226/00} 27 083.361 1 Bracket 083.502 1 Speedometer, MPH {SN 5226/02} 28 083.486 1 Hazard unit, 3 pole 083.503 1 Speedometer, MPH {SN 5227/02} 29 083.336 1 Switch, hazard warning 75 083.509 1 Control, remote 30 083.395 1 Switch, map light 76 172.066 1 Clamp 083.487 1 Switch, GT, heated backlight 77 023.154 1 Box, angle drive 31 083.394 2 Switch, courtesy light 78 083.510 1 Speedo cable, STD, 138 cm 32 162.467 4 Tap screw 083.511 1 Speedo cable, OlD, 212 cm 33 083.488 1 Switch, panel light 083.512 1 Speedo cable, Auto., 153 cm 34 162.506 2 Screw, N° 6 UNC x 1/4” 79 172.194 2 Rivet 35 083.344 1 Switch, ignition 80 163.005 2 Washer 36 162 … 2 Screw, switch 81 012.140 1 Temperature transmitter

© Van Gestel B&C 2005 59 Wiper motor - Wiring harness

60 © Van Gestel B&C 2005 Wiper motor - Wiring harness

Part nr. 082.006 Wiper motor excluding gear

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 083.530 2/3 Wheelbox fitting kit, 25 080.095 1 Harness, dipper switch 2 required for European Roadsters, 3 required for u.s. spec. 080.096 1 Harness, reverse switch 083.533 2 Wheelbox fitting kit, GT only 080.097 1 Harness, automatic option 2 087.001 2/3 Wiper blade, MGC 080.098 1 Harness, overdrive option 087.002 2 Wiper blade, MGC GT 080.100 1 Harness, wiper motor, MGC GT 3 087.003 2/3 Wiper arm, MGC 26 080.009 1 Cable, earth 087.004 2 Wiper arm, MGC GT 27 080.014 1 Cable, battery (negative) to earth 4 083.104 2 Wheelbox, MGC Metal dash 28 080.013 1 Cable, battery to battery 083.105 2/3 Wheelbox, Padded dash & all GT’S 29 080.099 1 Cable, battery (positive) to solonoid 5 083.111 2/3 Distance piece, MGC 30 083.534 1 Connector plug, tachometer 083.112 2 Distance piece, MGC GT 31 083.535 2 Connector plug, 3 way 6 083.109 2/3 Seal, MGC 32 083.536 2 Connector plug, 3 way (reverse lamp) 083.110 2 Seal, MGC GT 33 083.537 1 Connector plug, control box, “4TR” 7 083.107 2/3 Chrome cone, MGC 34 083.538 A/R Connector plug, 17,5 AMP 083.108 2 Chrome cone, MGC GT 35 083.539 1 Connector plug kit for “ACR” alternators 8 083.106 2/3 Octagonal chrome nut 36 083.540 1 Connector plug,”ACR” EUROPEAN ALTERNATORS 9 082.006 1 Wiper motor (excluded gear) 37 083.541 A/R Connector pin, will fit into moulded multi way plugs 10 083.523 1 Brush set 38 083.542 A/R Connector socket, will fit into moulded multi way plugs 11 083.524 1 Armature 39 083.180 A/R Cable terminal. For more terminals, please use your “Tool Catalogue” 12 083.525 1 Switch, parking 40 083.041 A/R Cable connector, single 13 083.526 1 Gear, 105°, MGC 41 083.042 A/R Cable connector, double 083.527 1 Gear, 115°, MGC GT early 42 083.043 A/R Cable connector, triple 083.528 1 Gear, 125°, MGC GT late 43 083.169 A/R Fuse holder 14 133.138 1 Pad, wiper motor 44 084.005 A/R Set of 3 fuses, 35 AMP 15 133.139 1 Distance block 45 083.124 1 Horn, high note 16 162.018 2 Screw 083.125 1 Horn, low note 17 164.012 2 Spring washer 46 083.126 1 Horn bracket 18 163.011 2 plain washer 47 122.002 A/R Grommet, 1 “-3/16” 19 133.137 1 Strap 122.005 2 Grommet, rear valance 5/8”-3/16” 20 133.132 1 Casing, motor to wheel box, MGC 122.006 1 Grommet, boot floor inwards 133.133 1 Casing, motor to wheel box, MGC GT 122.001 1 Grommet, main harness. 133.584 1 Casing, motor to wheel box, cut to required length For more grommets, please use your “Tool Catalogue” 21 133.134 1 Casing, wheelbox to wheel box, MGC 48 172.252 A/R Clip harness to wheel arch 133.585 1 Casing, LH wheel box to central wheel box, MGC USA 49 083.079 1 Flasher unit, 3 pole 133.586 1 Casing, RH wheel box to central wheelbox, MGC USA 083.172 1 Flasher unit, 2 pole 133.135 1 Casing, wheelbox to wheelbox, MGC GT 50 083.543 1 Control, warning light 22 133.136 1 Casing, wheelbox end 51 190.058 1 “TOOL CATALOGUE” 23 083.024 1 Rack, cut to length 24 080.032 1 Main wiring harness, 1968-’69 GCN 1.1 01 > 4265 with seperate alternator control box 080.033 1 Main wiring harness, 1969 GCN 1.4266 - on without seperate alternator control box 080.094 1 Main wiring harness, 1968-’69 GCN1.101 > 4265, N. America with seperate alternator control box 080.087 1 Main wiring harness, 1969 GCN 1.4266 - on, N. America without seperate alternator control box 080.228 1 Tail harness for roadster 080.229 1 Tail harness for GT

© Van Gestel B&C 2005 61 Lights and lamps

62 © Van Gestel B&C 2005 Lights and lamps

Part nr. 084.604

5” fog lamp Part nr. rear fixing 084.603 5” spot lamp rear fixing

Part nr. Part nr. 084.191 5” fog lamp 084.193 5” spot lamp

Part nr. 284.090 Part nr. Part nr. 5” halogen spot lamp with round back 084.194 Spare fog lamp glass 084.196 Spare spot lamp glass Comes with halogen bulb for modern lighting. Sold in pairs

ILL N° PART N° QTY DISCRIPTION ILL N° PART N° QTY DISCRIPTION

1 084.081 2 Seal, headlamp bowl to body 29 084.191 2 Fog lamp assembly (illustrated) (not E11 homologated) 2 133.050 2 Headlamp bowl 084.193 2 Spot lamp assembly (not E11 homologated) 3 084.051 2 Kit, lamp adjusting screws & spring 30 084.194 2 Light unit for fog lamp (illustrated) 4 172.043 2 Clip, headlamp rim retaining 084.196 2 Light unit for spot lamp 5 162.507 1 Screw kit, head lamp bowl to body 31 084.198 2 Bulb, fog lamp 6 084.052 2 Wire & lamp adaptor 084.119 2 Bulb, spot lamp 7 083.115 2 Bulb holder, when pilot lamp is fitted in headlamp 32 084.056 2 Rear lamp assembly, amber & red 8 084.123 2 Bulb, for pilot lamp 33 084.057 2 Gasket, lamp to body 9 084.054 2 Bulb, clear 34 084.058 2 Gasket, lens to lamp 084.019 2 Bulb, yellow 35 084.059 2 Rim, lens retaining 10 084.110 2 Bulb, H4, clear 36 084.060 2 Lens, stop & tail, red (with reflector) 084.111 2 Bulb, H4, yellow 37 084.061 2 Lens, amber, flasher 11 172.044 2 Clip, bulb retaining 084.270 2 Lens, red, flasher (US) 12 Lamp unit, European homologated, LHD 38 Bulb, flasher 084.082 2 084.062 2 Part nr. 084.105 2 Lamp unit + hole for pilot lamp, European homologated, LHD 39 084.063 2 Bulb, stop and tail 185.337 13 084.103 2 H4 lamp unit, European homologated, LHD 40 084.075 2 Reverse lamp assembly 5” lamp 084.107 2 H4 lamp unit + hole for pilot lamp, European homologated, LHD 41 084.076 2 Lens, gasket & screws protection cover 14 084.053 2 Inner bowl 42 162.404 4 Screw 15 084.087 2 Inner chrome ring 43 084.125 2 Bulb 16 166.065 6 Screw 44 084.251 4 Gasket 17 084.055 2 Chrome head lamp rim 45 084;070 2 Number plate lamp 18 084.064 2 Side & flasher lamp assembly (white & amber) 46 084.071 2 Seal, lens seating 19 084.068 4 Gasket 47 141.021 1 PAIR LAMP PLINTHS 20 084.062 2 Bulb 48 084.074 2 Bulb 21 084.069 2 Bulb 49 083.019 2 Lens 22 084.066 2 Lens, white 50 083.020 2 Cover 084.377 2 Lens, amber (US) 51 162.110 2 Screw, short 23 084.065 2 Lens, amber 162.111 2 Screw, longer 084.378 2 Lens, white (Italy) 52 161.047 4 Nut, self locking 24 084.067 2 Rim 53 084.095 2 Bulb holder assembly 25 162.161 4 Screw 54 084.077 1 GT, roof lamp 26 084.379 2 Reflector, amber, front (US) 55 084.078 1 Lens 084.380 2 Reflector, red, rear (US) 56 084.079 1 Bulb 27 162.312 8 Sc rew 57 162.112 2 Screw 28 161.024 8 Nut 58 162.403 2 Screw, rim retaining

© Van Gestel B&C 2005 63 Body panels

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 133.049 2 Complete bolting kit to fit one 131.066 1 RH front wing, roadster, original 23 133.043 1 RH mini splash plate front wing 131.067 1 LH front wing, roadster, original 133.044 1 LH mini splash plate 2 131.060 1 Rear valance 131.068 1 RH front wing, GT, original 24 121.014 1 RH seal, top 3 131.061 1 Rear valance, lower part only 131.069 1 LH front wing, GT, original 121.015 1 LH seal, top 4 152.011 1 Fastener set, mouldings 13 131.075 1 RH door, roadster 25 121.127 1 RH seal, splash plate (6 plates on stud) 131.076 1 LH door, roadster 121. 128 1 LH seal, splash plate 5 152.012 1 Fastener set, mouldings 131.079 1 RH door, GT 26 152.080 1 Rivet set (50 pieces) (50 clips on rivet) 131.080 1 LH door, GT 27 133.054 2 Bolting kit, splash plate 6 134.031 1 6 piece moulding set 14 131.081 1 RH rear wing, roadster 28 132.086 1 RH front wing repair panel 134.001 1 RH front wing moulding 131.082 1 LH rear wing, roadster 132.087 1 LH front wing repair panel 7 134.002 1 LH front wing moulding 15 131.083 1 RH rear wing, GT 29 132.088 1 RH door skin 8 134.003 1 RH door moulding 131.084 1 LH rear wing, GT 132.089 1 LH door skin 9 134.004 1 LH door moulding 16 131.070 1 Front valance 30 132.092 1 RH door bottom repair piece 10 134.005 1 RH rear wing moulding 17 133.052 1 Fastener kit, front valance 132.093 1 LH door bottom repair piece 11 134.006 1 LH rear wing moulding 18 131.326 1 Top panel, European 31 131.085 1 RH rear wing repair panel 12 138.060 1 RH front wing, roadster, 131.327 1 Top panel, US 131.086 1 LH rear wing repair panel good reproduction 20 132.408 1 Rear decking panel 32 132.090 1 RH rear wing lower part 138.061 1 LH front wing, roadster, 22 132.080 1 RH splash plate 132.091 1 LH rear wing lower part good reproduction 132.081 1 LH splash plate 33 132.084 1 RH ‘B’ post panel 138.062 1 RH front wing, GT, good reproduction 132.085 1 LH ‘B’ post panel 138.063 1 LH front wing, GT, good reproduction

64 © Van Gestel B&C 2005 Inner body panels

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 131.050 1 RH inner side member 10 132.075 1 RH ‘A’ post, Roadster 22 131.406 1 RH floor assembly 131.051 1 RH inner side member repair piece, 132.076 1 LH ‘A’ post, Roadster 131.407 1 LH floor assembly 123 cm 132.077 1 RH ‘A’ post, GT 23 131.408 1 RH floor, front section 131.052 1 LH inner side member 132.078 1 LH ‘A’ post, GT 131.409 1 LH floor, front section 131.053 1 LH inner side member repair piece, 11 131.395 1 RH inner front wheel arch, 24 132.344 1 RH heel board 123 cm European 132.345 1 LH heel board 2 131.054 1 RH under castle 131.396 1 RH inner front wheel arch, US 25 133.041 1 RH bracket, spring mounting 131.055 1 LH under castle 131.397 1 LH inner front wheel arch 133.042 1 LH bracket, spring mounting 3 131.056 1 RH inner sill 12 131.398 1 RH side member 26 131.043 1 RH side, rear member 131.057 1 LH inner sill 131.399 1 LH side member 131.044 1 LH side, rear member 4 131.058 1 RH outer sill 13 131.400 1 RH side member upper plate 27 132.055 1 RH springhanger, repair section 131.059 1 LH outer sill 131.401 1 LH side member upper plate 132.056 1 LH spring hanger, repair section 5 133.045 1 RH sill end plate 14 132.402 1 RH chassis box section 28 132.062 1 RH outer wheel arch 133.046 1 LH sill end plate 132.403 1 LH chassis box section 132.063 1 LH outer wheel arch 6 133.047 2 Reinforcement, above jacking point 15 131.404 1 Cross member, front suspension 29 132.060 1 RH inner wheel arch part 7 133.601 2 JACKING POINT 16 132.413 1 Platform, bonnet locking 132.061 1 LH inner wheel arch part 8 132.411 1 RH reinforcement, inner wing 17 133.602 1 Support, platform 30 132.053 1 RH boot floor side panel 132.412 1 LH reinforcement, inner wing 18 132.414 1 Radiator duct panel 132.054 1 LH boot floor side panel 9 132.071 1 RH side panel, Roadster 19 132.415 1 Cross profile, radiator duct 31 131.040 1 Boot floor panel 132.072 1 LH side panel, Roadster 20 132.416 1 RH radiator support panel 32 132.343 2 Battery box 132.073 1 RH side panel, GT 132.417 1 LH radiator support panel 33 132.052 1 Panel, battery cover 132.074 1 LH side panel, GT 21 131.405 1 Crossmember 34 121.012 1 Seal 35 152.010 5 Fastener

© Van Gestel B&C 2005 65 Boot and bonnet

66 © Van Gestel B&C 2005 Boot and bonnet

Part nr. 141.022 Air intake grill

Part nr. 133.868 Stainless steel mesh

Part nr. 172.233 Blind fix, 6 required

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 141.022 1 Air intake 53 171.008 1 Spring 2 172.033 6 Clip 54 163.001 1 Washer 3 133.056 1 Bracket rubber 55 172.030 1 Clip 4 122.011 1 Rubber 56 162.061 2 Screw 5 133.603 1 Bonnet buffer kit 57 133.065 1 Stricker 6 121.072 1 Bonnet seal 58 163.011 2 Washer, plain 7 150.019 1 Rod 59 164.012 2 Washer, spring 8 171.008 1 Spring 60 162.077 2 Screw 9 163.001 1 Washer, plain 61 162.060 2 Screw 10 121.028 1 Seal, rear 62 164.015 2 Washer, spring 11 150.365 1 Insulation pad bonnet 63 163.013 2 Washer, plain 12 131.410 1 Bonnet aluminium 64 133.066 1 Latch lock 131.412 1 Bonnet fiber glass 65 163.013 2 Washer, plain 13 134.150 1 Cable bonnet pull 66 164.015 2 Washer, spring 14 172.042 3 Clip 67 162.060 2 Screw 15 161.002 2 Nut 68 131.090 1 Boot lid steel 16 172.056 1 Fastener cable 69 121.032 1 Sealing boot lid 162.135 1 Screw fastener 70 133.067 1 RH hinge 17 121.216 1 Seal, bonnet front 133.068 1 LH hinge 18 133.081 4 Buffer 71 162.029 12 Screw 19 162.047 8 Screw 72 164.012 12 Washer, spring 20 164.015 8 Washer, spring 73 132.418 1 plate, seal retainer 21 161.024 8 Nut 74 121.217 1 Seal above radiator 22 161.026 1 Nut adjuster 75 141.365 1 Bonnet moulding 23 171.009 1 Spring 76 133.604 1 Fastener kit, bonnet moulding 24 133.057 1 Plate 172.167 6 One plate on stud only 25 133.058 1 Pin 77 131.103 1 GT tailgate 26 133.059 1 Cup lock lockation 78 133.605 1 RH tail hinge 27 162.029 3 Screw 133.606 1 LH tail hinge 28 164.012 3 Washer, spring 79 162.143 4 Screw 29 171.010 1 Spring 80 133.607 A/R PACKING hinge 30 133.060 1 plate catch 81 161.002 6 NUT 31 133.061 1 Safety catch 82 164.002 6 Washer, spring 32 161.042 3 Nut 83 163.001 6 Washer, plain 33 162.060 3 Screw 84 141.056 1 RH stay assembly 34 133.062 1 Bracket 141.057 1 LH stay assembly 35 162.060 2 Screw 85 141.058 2 Cover 36 164.015 2 Washer, spring 86 152.043 2 Cap & starlock, large 37 163.013 2 Washer, plain 87 152.042 2 Cap & starlock, small 38 133.063 2 Hinge bonnet 88 161.326 4 Dome nut, chrome 39 161.019 4 Nut 89 164.007 4 Washer, shakeproof 40 164.012 4 Washer, spring 90 163.011 4 Washer, plain 41 163.011 4 Washer, plain 91 164.041 4 Washer, anti rattle 42 162.077 4 Screw 92 167.104 2 Stud, pivot stay 43 162.029 4 Screw 93 163.008 2 Washer, plain 44 164.012 6 Washer, spring 94 164.002 2 Washer, spring 45 163.011 6 Washer, plain 95 161.012 2 Nut, locking 46 161.019 2 Nut 96 133.608 1 Catch cover, GT only 47 141.054 1 Lock set, boot & doors (3 pieces) 97 141.366 1 Letterset “MGC GT” 48 133.069 1 Gasket set, boot lock & door handles 98 152.112 1 23 pieces blind fixing studs 49 141.364 1 Badge MG 99 152.045 A/R Blind fix 50 172.031 15 Clip 100 121.055 1 Seal (foam), outer 51 141.001 1 Badge (set of 3 pieces) 101 134.032 1 Seal retainer 52 150.020 1 Rod 102 162.467 10 Screw 103 121.032 1 Seal, inner

© Van Gestel B&C 2005 67 Door fittings, part 1

68 © Van Gestel B&C 2005 Door fittings, part 1

Racing mirror Originally this racing mirror was designed for Mini! Due to it’s success these mirrors can be found on many classic cars. • 141.851 LH door • 141.850 RH door

Part nr. 141.968 Lock fitting kit Designed to prevent the lock from rotating in the door shim.

Door mirror arm on spring (incl. rubber gasket & screws) • 141.123 LH mirror arm • 141.122 RH mirror arm

Part nr. 141.125 Mirror head Chrome plated door mirror (including all pieces shown on photo) • 141.113 LH door • 141.112 RH door

Also available: black painted door mirror • 141.115 LH door • 141.114 RH door

ILL N° PART N° QT DESCRIPTION ILL N° PART N° QT DESCRIPTION

1 121.023 1 RH drop glass seal 23 133.609 4 OVERSIZE HING PIN 121.024 1 LH drop glass seal 24 133.099 8 Tapping plate 2 121.025 1 RH seal, frame to door 25 162.083 12 Screw, hinge to door 121.026 1 LH seal, frame to door 26 162.143 16 Screw, hinge to ‘A’ post 3 150.029 2 Inner draught excluder strip 27 163.009 4 Washer, plain 4 122.012 2 Corner block 28 164.021 4 Washer, spring 5 121.060 4 Channel seal 29 161.032 4 Nut 6 121.057 1 RH 1/4 light seal, Roadster 30 122.183 4 Rubber buffer 121.058 1 LH 1/4 light seal, Roadster 31 152.113 4 Rivet, buffer to hinge 121.070 1 RH 1/4 light seal, GT 32 163.013 4 Washer, plain 121.071 1 LH 1/4 light seal, GT 33 164.015 4 Washer, spring 7 122.032 4 DOOR PLUG, plastic 34 161.024 4 Nut 8 121.218 2 Seal under 1/4 light, GT ONLY 35 133.268 2 Connector 9 152.039 14 Rivet 36 172.191 4 Clip, rod to lock 10 172.164 14 Fasteners, GT only 37 152.114 2 Fastener, non adjustable rod 11 134.017 1 RH door finisher, GT 38 172.261 2 Retainer, rod to door 134.018 1 LH door finisher, GT 39 141.143 1 RH, release handle 12 133.069 1 Gasket set 141.144 1 LH, release handle 13 141.045 1 Door seal finisher set, Roadster 40 141. 145 4 Bezel, black plastic 14 141.367 1 Pair door finishers, GT 41 163.013 6 Washer, plain 141.368 1 RH finisher 42 164.015 6 Washer, spring 141.369 1 LH finisher 43 162.060 6 Screw 15 162.308 A/R Screw 44 133.610 1 RH operating rod 16 152.039 A/R Rivet 133.611 1 LH operating rod 17 150.038 1 2 door seals, black velour + rubber 45 133.612 1 RH locking rod, adjustable (illustrated) 150.039 1 2 door seals, red velour + rubber 133.613 1 LH locking rod, adjustable (illustrated) 150.040 1 2 door seals, black PVC + rubber 133.614 1 RH locking rod, non adjustable (not ill.) 150.023 2 1 door seal, GT, black velour + rubber 133.615 1 LH locking rod, non adjustable (not ill.) 150.022 2 1 door seal, GT, red velour + rubber 46 133.598 1 RH door lock 150.024 2 1 door seal, GT, black PVC + rubber 133.599 1 LH door lock 18 141.054 1 Set of 3 locks 47 133.449 1 RH stricker plate 141.053 1 Pair door locks 133.450 1 LH stricker plate 141.347 1 AN IMPROVED PAIR DOOR LOCKS, 48 133.120 A/R Shim with threaded body and steel securing nut instead of spring- 49 162.146 6 Screw, lock to door clip fastening 50 162.098 2 Screw, stricker plate (long) 19 122.182 2 Rubber ring behind door locks (included in 141.054) 51 162.058 4 Screw, stricker plate (short) 20 172.206 2 Lock clip (included in 141.054) 52 133.122 2 Tapping plate, top 21 141.097 2 Door handle 53 133.121 2 Tapping plate, bottom 22 133.097 2 RH door hinge 54 141.049 2 Handle, door pull 133.098 2 LH door hinge 55 162.142 4 Screw

© Van Gestel B&C 2005 69 Door fittings, part 2

70 © Van Gestel B&C 2005 Door fittings, part 2

Part nr. 185.049

Steel badge clamp fits on badge bar Part nr. Part nr. 085.158 133.834 Part nr. Chrome plated ‘RAC’ badge Stainless steel fixing plate 140.273 Chrome plated badge bar with lamp brackets very high quality finish 162.312 chrome plated screw • 161.047 nylock nut

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 140.189 1 RH quarter light with curved handle (A) 39 133.207 2 Repair screw, on 2 hole plate 140.190 1 LH quarter li1ht with curved handle (A) 40 133.202 2 Repair screw, on 1 hole plate 140.191 1 RH quarter ight with flat handle (B) 41 133.160 2 Pivot for Roadsters 140.192 1 LH quarter light with flat handle (B) 133.627 2 Pivot for GT 2 140.193 1 GT RH quarter light with curved handle (A) 42 133.159 2 Distance piece 140.194 1 GT LH quarter light with curved handle (A) 43 163.010 4 Washer, plain 140.195 1 GT RH quarter light with flat handle (B) 44 171.013 2 Spring 140.196 1 GT LH quarter light with flat handle (B) 45 161.061 2 Nut 3 121.057 1 RH seal 46 133.157 1 RH HANDLE, CURVED (A) 121.058 1 LH seaI 133.158 1 LH handle, curved (A) 4 121.070 1 GT RH seal 47 133.437 1 RH handle, flat (B) 121.071 1 GT LH seal 133.438 1 LH handle, flat (B) 5 122.012 2 Corner block 48 133.156 2 Bracket for curved handle (A) 6 121.060 4 Channel seal, front or rear 133.513 2 Bracket for flat handle (B) 7 121.025 1 RH seal, ventilator seating 49 164.037 2 Washer, waved 121.026 1 LH seal, ventilator seating 50 172.204 2 Pin 8 121.218 2 GT seal, ventilator seating 51 133.628 2/1 RH bracket (2 screw fixing type) 2 for Roadster, 1 for GT 9 120.015 2 Glass, clear 133.629 2/1 LH bracket (2 screw fixing type) 2 for Roadster, 1 for GT 120.042 2 Glass, tinted 52 133.630 1 RH bracket, GT only (early type) 10 120.043 1 GT RH glass, clear 133.631 1 LH bracket, GT only (early type) 120.044 1 GT LH glass, clear 53 133.632 2/1 RH bracket, 2 for Roadster, 1 for GT 120.045 1 GT RH glass, tinted 133.633 2/1 LH bracket, 2 for Roadster, 1 for GT 120.046 1 GT LH glass, tinted 54 133.634 1 RH bracket, GT only 11 133.150 1 RH top pivot 133.635 1 LH bracket, GT only 133.151 1 LH top pivot 55 162.507 2 Set of 10 screws, nuts, washers & spring washers 12 133.154 1 RH lower pivot 56 134.034 1 RH rear channel 133.155 1 LH lower pivot 134.035 1 LH rear channel 13 133.616 1 RH top pivot, GT 57 162.058 2 Screw 133.617 1 LH top pivot, GT 58 163.029 2 Washer, countersunk 14 133.618 1 RH lower pivot, GT 59 120.016 1 RH door glass, clear 133.619 1 LH lower pivot, GT 120.017 1 LH door glass, clear 15 162.158 4 Rivet, top pivot 120.047 1 RH door glass, tinted 16 162.115 4 Screw, lower pivot 120.048 1 LH door glass, tinted 17 162.159 6 Screw, cap 60 120.018 1 RH door glass, GT, clear 18 162.527 4 Screw, bracket 120.019 1 LH door glass, GT, clear 19 162.528 4 Screw, frame 120.049 1 RH door glass, GT, tinted 20 162.168 4 Screw 120.050 1 LH door glass, GT, tinted 21 164.002 4 Washer, spring 61 121.061 2 Seal, glass to channel 22 152 … 2 Rivet 62 134.033 2 Lower channel 23 161.060 4 Nut, ventilator mounting 63 132.350 1 RH window regulator 24 164.012 1 Washer, spring 132.351 1 LH window regulator 25 133.622 2 Reinforcement plate, rear 64 162.076 14 Screw 26 133.623 2 Reinforcement plate, front 65 164.012 14 Washer, spring 27 133.624 A/R Adjusting plate 66 163.011 14 Washer, plain 28 161.019 2 Nut 67 133.636 2 Stop, regulator arm 29 164.012 2 Washer, spring 68 163.008 2 Washer, plain 30 163.010 2 Washer, plain 69 164.002 2 Washer, spring 31 133.626 A/R Packing, ventilator to door 70 161.008 1 Nut 32 121.061 2 Seal, glass fixing (Before using this special seal wet the seal with 71 133.265 2 Handle, window regulator thinner n° 186.060, the rubber will be very soft and transformable) 72 133.266 2 Washer, fibre 33 140.049 1 RH inner frame 73 133.267 2 Screw, spring washer & escutcheon 140.050 1 LH inner frame 74 162.312 2 Screw 34 141.370 1 RH inner frame, GT 75 164.015 2 Washer, spring 141.371 1 LH inner frame, GT 76 133.264 2 Escutcheon, chrome 35 141.372 1 RH capping, outer frame 77 133.113 2 Buffer, felt 141.373 1 LH capping, outer frame 78 133.111 1 RH bracket, glass stop (Roadster) 36 141.374 1 RH capping, outer frame, GT 133.112 1 LH bracket, glass stop (Roadster) 141.375 1 LH cappin~, outer frame, GT 133.637 1 RH bracket, glass stop (GT) 37 133.161 1 RH channe , drain 133.638 1 LH bracket, glass stop (GT) 133.162 1 LH channel, drain 79 172.069 8 Nut, spire 38 141.376 1 RH channel, drain, GT 80 162.145 8 Screw 141.377 1 LH channel, drain, GT

© Van Gestel B&C 2005 71 Bumpers and grill

72 © Van Gestel B&C 2005 Bumpers and grill

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 140.028 1 Rear bumper 34 164.006 4 Washer, spring 2 140.029 1 RH over rider, rear 35 163.014 4 Washer, plain 140.030 1 LH over rider, rear 36 162.124 2 Bolt 3 133.650 1 Complete bolting kit, rear bumper to bumper brackets, number plate 37 132.099 1 RH bracket fixing & bumper fillers with fixing screws 132.100 1 LH bracket 4 140.031 1 Front bumper 38 133.082 1 Bolting set, front brackets to chassis 5 140.032 2 Front over rider 39 132.046 1 Number plate 6 133.649 1 Complete bolting kit, front bumper to bumper brackets. Included are all 132.927 1 Number plate, stainless steel bolts, nuts, brackets, washers, spacers and also the brackets and screws 40 133.079 2 Brackets for the number plate fixing 41 162.123 2 Screw 7 140.033 1 Chrome grill assembly 42 163.011 2 Washer, plain 8 133.651 1 Complete screw kit, grill fixing 43 164.012 2 Washer, spring 9 133.080 1 Set of 3 brackets 44 161.019 2 Nut 10 164.012 2 Washer, spring 45 162.125 2 Screw 11 161.019 2 Nut 46 164.012 2 Washer, spring 12 141.042 1 Bumper filler pair 47 161.019 2 Nut 13 132.097 2 Spring bar, rear 48 121.008 1 Moulding 14 133.070 10 Washer, spacer 49 162.060 3 Screw, pan pozi 15 162.124 2 Bolt 50 163.013 3 Washer, plain 16 164.006 2 Washer, spring 51 164.015 3 Washer, spring 17 163.023 2 Washer, plain 52 161.024 3 Nut 18 161.045 2 Nut 53 162.126 3 Screw, grill to brackets 19 164.011 2 Washer, spring 54 122.009 2 Buffer, grill to bonnet 20 163.031 4 Washer, plain 55 162.029 3 Screw, grill to radiator duct 21 162.067 6 Chrome bolt, washers & nut 56 164.012 3 Washer, spring 22 163.014 6 Washer, plain 57 163.011 3 Washer, plain 23 164.006 6 Washer, spring 58 133.652 2 Towing eye bracket 24 161.026 6 Nut 59 141.043 1 Centre piece only 25 132.098 2 Bracket, bumper 60 141.044 1 Badge grill 26 133.177 1 Bolting kit, rear bumper brackets to chassis 61 172.031 6 Clip 28 133.078 2 Brackets 62 162.061 6 Screw 29 122.007 2 Rubber spaces 63 132.096 1 Number plate rear 30 163.032 2 Washer, plain 132.928 1 Number plate rear, stainless steel 31 164.006 2 Washer, spring 64 122.008 2 Buffer, number plate 32 162.211 2 Bolt 65 162.123 2 Screw 33 161.026 4 Nut 66 168.029 4 Washer, packing 67 163.011 2 Washer, plain

© Van Gestel B&C 2005 73 Windscreen

74 © Van Gestel B&C 2005 Windscreen

Part nr. 141.288 Late type, dipping 2 screw fix

Part nr. 141.071 Clamp type mirror gold painted back

ILL N° PART N° QT DESCRIPTION LL N° PART N° QT DESCRIPTION

1 120.002 1 Windscreen glass, clear 35 140.017 1 Top rail, early (European) 120.003 1 Windscreen glass, tinted 134.153 1 Top rail, late (US) 2 121.018 1 Glazing seal 36 140.018 1 RH pillar 3 121.019 1 Seal, windscreen frame to body 37 140.019 1 LH pillar 4 121.020 1 RH pillar seal 38 140.020 1 Bottom rail, European 121.021 1 LH pillar seal 134.154 1 Bottom rail, US 5 121.022 2 Seal, pillar side 39 150.344 1 Pair sun visors, LHD 6 140.021 2 Seal retainer, into seal 150.345 1 RH sun visor with mirror 7 134.152 2 Seal retainer on pillar side 150.346 1 LH sun visor 8 152 … 8 Rivet 40 150.347 1 Sun visor kit, complete 9 162 … 4 Screw 41 122.075 2 Rubber block, sun visor 10 141.017 1 Screw set, windscreen frame (nO 1 1>14) 42 152.086 4 Rivet, short 11 162.531 4 Top screws, short, chrome 152.089 4 Rivet, long 12 162.532 2 Top screws, long, chrome 43 133.499 2 Pivot bracket 13 162.533 4 Bottom, side screw, zinc plated 44 164.017 2 Double spring washer 14 162.534 4 Bottom screw, zinc plated 45 163.066 2 Cup washer 15 133.641 2 Tapping plate, top 46 161.047 2 Self locking nut 16 133.642 1 Tapping plate, bottom, RH 47 141.071 1 Mirror, rear view 133.643 1 Tapping plate, bottom, LH 48 140.016 1 Chrome centre bar (Thread on top side only) 17 141.379 1 Bracket centre rod, bottom, European 49 161.040 1 Dome nut, chrome plated 141.380 1 Bracket centre rod, bottom, US 50 161.024 1 Lock nut 18 133.644 1 Tapping plate 51 141.342 1 Chrome centre bar (Thread on both sides) 19 162.535 2 Chrome plated H.T. screws, with point 52 161.276 1 Bottom nipple 20 164.042 2 Washer spring, chrome plated 53 141.288 1 Interior mirror (dipping) 21 163.076 2 Washer plain, chrome plated 54 162.049 2 Screw, mirror fixing 22 162.103 4 Bolt, frame to body 55 150.348 2 GT sun visor, grey, ‘65-’76 23 164.006 4 Washer, spring 150.349 1 GT sun visor, grey & black, ‘76-’80 drivers side (LHD) 24 163.014 2 Washer, plain 150.350 1 GT sun visor, grey & black, ‘76-’80 passenger side (LHD) with mirror 25 163.026 2 Washer, plain, ‘D’ outer 56 133.500 1 GT retainer (European type) 26 133.645 1 Bolting kit, frame to body (included illustration numbers 19to 25) 133.501 1 GT retainer (USA type) 27 141.020 A/R PACKING 57 162.338 2 Screw 28 141.019 2 Spacer bloc, alluminium 58 162.049 2 Screw 133.646 2 Spacer block, plastic (not original but an alternative product) 59 141.343 1 GT mirror, rear view 29 133.647 1 RH, ‘A’ post windscreen leg cover 60 141.344 1 GT mirror arm 133.648 1 LH, ‘A’ post windscreen leg cover 61 133.502 1 Buffer 30 152.014 1 Rivet (set of 10 pieces) 62 162.427 3 Screw 31 152.019 1 Fastener, stud (set of 10 pieces) 63 133.503 1 Cover 32 141.381 1 Bracket, centre rod top, European 64 133.504 1 Arm 133.417 1 Bracket, centre rod top & mirror fixing, US 65 133.505 1 Sucker stem 33 141.016 2 Bracket, hood clamps 66 133.506 1 Base 34 131.416 1 Windscreen assembly, European, clear glass 67 141.345 1 GT mirror, dipping 131.417 1 Windscreen assembly, European, tinted glass 131.418 1 Windscreen assembly, US, clear glass 131.419 1 Windscreen assembly, US, tinted glass

© Van Gestel B&C 2005 75 Windscreen washer components & mirrors

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 083.047 2 Water Jet, Roadster 13 083.314 1 Cap and non return valve 20 141.116 2 RH or LH mirror arm, on spring 2 083.060 1 Water Jets, GT 14 083.056 1 ‘T’ piece 21 141.117 2 Round mirror 3 083.055 1 Tubing set 15 083.555 1 ‘T’ piece with non return valve 22 141.112 1 RH door mirror, chrome 4 083.058 A/R Rubber strap 16 083.057 1 Non return valve, in line 141.113 1 LH door mirror, chrome 5 083.046 1 Pump 17 141.192 1 Mirror, no drilling holes, clamps on 141.114 1 RH door mirror, black 6 083.294 1 Pump, electric quarter lights 141.115 1 LH door mirror, black 7 083.553 1 Original type, water container 18 141.070 2 Racing mirror 23 141. 122 1 RH mirror arm, on spring 8 083.554 1 Strap, for original container 19 141.011 1 RH wing mirror 141. 123 1 LH mirror arm, on spring 9 083.049 1 Cap 1 LH door mirror 141.124 2 Straight arm 10 083.054 1 Valve, non return 141.012 1 LH wing mirror 24 141.125 2 Mirror 11 083.050 1 MGB container 1 RH door mirror 25 141.069 2 Wing mirror 12 083.061 1 Bracket

76 © Van Gestel B&C 2005 Seats

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

2 156.001 1 Pair seat covers, 14 152.041 16 Hook, seat diaphragm to frame 156.056 1 Rear seat cover, red leather black leather with white piping 15 157.005 1 RH seat base foam (1967-’68) with black piping (1967-’68) 156.002 1 Pair seat covers, 157.006 1 LH seat base foam (1967-’68) 156.009 1 Rear seat cover, black vinyl black leather with red piping 157.011 1 RH seat foam (1969) with white piping (1967-’68) 156.003 1 Pair seat covers, 157.012 1 LH seat foam (1 969) 156.010 1 Rear seat cover, black vinyl red leather with white piping 16 157.007 2 Squab foam (1967-’68) with red piping (1967-’68) 156.004 1 Pair seat covers, 157.013 2 Squab foam (1969) 156.011 1 Rear seat cover, red vinyl red leather with black piping 17 132.178 2 Squab hardboard (1967-’68) with white piping (1967-’68) 156.064 1 Pair seat cover kit, 132.181 2 Squab hardboard 156.012 1 Rear seat cover, red vinyl black leather with black piping for 18 132.179 1 KIT - RH + LH seat rails & runners with black piping (1967-’68) with or without headrests (1969) 19 132.180 1 KIT - all fasteners for slides to 156.065 1 Rear seat cover kit, black leather 3 NA 2 Head rest assembly, black leather frames and runners to floor with black piping (1969) 4 NA 2 Head rest cover, black leather 20 162.303 16 Screw, slide to frame 156.066 1 Rear seat cover kit, black vinyl 5 NA 4 Sleeve-finishing 21 163 … 16 Washer, plain with black piping (1969) 6 133.253 4 Bush-friction 22 161.012 16 Nut, self locking 29 152.009 4 Two screw base fastener 7 133.254 4 Retaining clip 23 134.039 4 Floor runner 30 162.102 8 Screw 8 141.146 2 Rake adjusting handle 24 134.040 4 Wooden spacer, under rail 31 133.174 3 Hinge, squab to floor 9 162.307 2 Screw, rake adjusting 25 162.065 8 Screw, floor runner to floor 32 164.015 12 Washer, spring 10 133.255 2 Tilt knob handle 26 163.040 8 Spacer, floor runner to floor 33 162.060 12 Screw 11 152.032 A/R Clip, seat cover to frame 28 156.053 1 Rear seat cover, black leather 34 133.175 2 Catch 12 132.175 1 RH seat frame (1967-’68) with white piping (1967-’68) 35 162.047 4 Screw 132.176 1 LH seat frame (1967-’68) 156.054 1 Rear seat cover, black leather 36 164.015 4 Washer, spring 132.177 2 Squab frame (1967-’68) with red piping (1967-’68) 37 161.042 4 Chrome dome nut 131.198 1 RH, frame pair (1969) 156.055 1 Rear seat cover, red leather 38 133.176 2 Staple securing 131.199 1 LH, frame pair (1969) with white piping (1967-’68) 39 162.163 4 Screw 13 153.058 2 Seat diaphragm 40 163.007 4 Washer

© Van Gestel B&C 2005 77 Trim

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 150.181 1 Dashtop recovering kit 17 083.148 1 Map lamp assembly 23 141.067 1 Ash tray 2 150.048 1 Crash roll assembly (includes Ill. N°3) 18 140.046 1 Alloy Moulding, cockpit rear 24 185.035 1 Leather covered gear lever knob 3 152.047 8 Fasteners (not trimed) 25 185.034 1 Wooden gear lever knob 4 150.182 1 Crash roll recovering kit, included 19 162.311 1 Fastener kit, rear moulding (36 pieces) 26 150.206 1 Leather gear lever gaiter foam, vinyl and piping 20 133.149 2 End plates 150.207 1 Vinyl gear lever gaiter 5 150.183 1 Panel behind radio conzoll, black 21 162.157 2 Screw 27 121.100 1 Grommet, gear lever 6 133.269 1 Conzoll radio speaker, European 22 150.041 1 Rear cockpit rail cover kit, black 28 141.149 1 Chrome rim, gaiter retainer 7 162.162 4 Screw with black piping 29 162.313 1 Chrome countersunk raised head 8 163.039 4 Cup washer 150.042 1 Rear cockpit rail cover kit, black POZI screw 9 150.153 1 Wooden panel behind panel speaker with white piping 162.204 3 Chrome countersunk raised head 10 133.172 1 Grill, radio speaker 150.043 1 Rear cockpit rail cover kit, black POZI screw 11 133.173 1 Bezel, grill (included nuts & washers) with red piping 30 187.010 1 Glue spray 12 163.034 4 Washer, plain 150.044 1 Rear cockpit rail cover kit, red with 13 164.023 4 Washer, spring white piping 14 161.054 4 Nut 150.045 1 Rear cockpit rail cover kit, red with 15 133.270 1 Conzoll radio, U.S. black piping 16 083.063 1 Radio hole banking kit

78 © Van Gestel B&C 2005 Trim panels

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 150.036 1 Pair MGC roadster, door cappings, black 151.164 1 Pair rear quarter panels, MGC, red 21 141.047 2 Pull, door handle 150.185 1 Pair MGC GT, door cappings, black with white piping 22 162.142 4 Screw 150.037 1 Pair MGC roadster, door cappings red 151.165 1 Pair rear quarter panels, MGC, red 23 150.195 1 Pair GT rear eappings, black 150.186 1 Pair MGC GT, door cappings, red with black piping 150.196 1 Pair GT rear cappings, red 2 150.029 2 Inner weather strip (cut to required length) 151.166 1 Pair rear quarter panels, MGC GT, 24 162.172 1 Screw and cup washer set for rear 3 141.025 1 Set of 4 door capping finishers, MGC black with black piping cappings and rear panels 141.147 1 Set of 4 door capping finishers, MGC GT 151. 167 1 Pair rear quarter panels, MGC GT, 25 151.137 1 Pair grey C post panels 4 162.155 1 Set of 1 6 screws black with white piping 26 172.138 A/R Panel clips 5 151.613 1 Panel kit, MGC, black & black piping 151.168 1 Pair rear quarter panels, MGC GT, 27 172.139 A/R Plugner cup, for clip 151.614 1 Panel kit, MGC, black & white piping black with red piping 28 151.139 1 Pair A post finishers 151.615 1 Panel kit, MGC, black & red piping 151. 169 1 Pair rear quarter panels, MGC GT, 29 150.023 2 Door seal, black velour + rubber 251.092 1 Panel kit, MGC, red & white piping red with white piping 150.022 2 Door seal, red velour + rubber 251.093 1 Panel kit, MGC, red & black piping 151.170 1 Pair rear quarter panels, MGC GT, 150.024 2 Door seal, black PYC + rubber 151.617 1 Panel kit, MGC GT, black & black piping red with black piping 30 150.205 2 Strip, retaining seal 151.618 1 Panel kit, MGC GT, black & white piping 9 162.156 1 Screw & cup washer set (50 pieces) 31 162.061 12 Screws 151.619 1 Panel kit, MGC GT, black & red piping 10 150.038 1 Door seal, for 2 sides, black velour + rubber 32 132.184 2 Alluminium door steps (original) 251.094 1 Panel kit, MGC GT, red & white piping 150.039 1 Door seal, for 2 sides, red velour + rubber 33 185.042 2 Stainless steel doorstep with MG logo 251.095 1 Panel kit, MGC GT, red & black piping 150.040 1 Door seal, for 2 sides, black PVC + rubber 34 150.026 2 Rear side seal, black velour + rubber 6 151.030 1 Pair kick panels, black 11 141.045 1 Set of 4, door seal finishers 150.025 2 Rear side seal, red velour + rubber 151.031 1 Pair kick panels, red 12 162.309 1 Fastener kit, finishers to body 150.027 1 RH, rear side seal, black PVC + rubber 7 151.156 1 Pair door panels, black with black piping 13 151.052 1 Rear bulkhead panel, black 150.028 1 LH, rear side seal, black PVC + rubber 151.157 1 Pair door panels, black with white piping 151.053 1 Rear bulkhead panel, red 35 151.140 1 Pair tailgate panels, black 151.158 1 Pair door panels, black with red piping 14 162.310 1 Fastener kit, rear bulkhead 151.141 1 Pair tailgate panels, red 151.159 1 Pair door panels, red with white piping 15 141.143 1 RH, inside release 36 151. 145 1 Headlining kit, grey 151.160 1 Pair door panels, red with black piping 141.144 1 LH, inside release 37 172.138 A/R Clip 8 151.161 1 Pair rear quarter panels, MGC, 16 133.268 2 Connectors 38 172.139 A/R Clip plugner black with black piping 17 141. 145 4 Bezel, inside release to panel 39 150.200 1 Map pocket, black 151.162 1 Pair rear quarter panels, MGC 18 133.265 2 Handle, window regulator 150.201 1 Map pocket, red black with white piping 19 133.266 2 Washer, fibre 40 141.148 1 Finisher, map pocket 151.163 1 Pair rear quarter panels, MGC, 20 133.267 2 Screw, spring washer and escutheon set black with red piping

© Van Gestel B&C 2005 79 Carpet sets

Our carpet sets are carefully made from tufted car carpeting for perfect fitting. The tunnel is premoulded and insulated together with all the floor mats. To improve insulation from noise and engine heat, you can put more felt under the floor mats. All fasteners are included for installation, not only the fasteners on the carpets but also fasteners on floor.

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 151.666 1 MAIN CARPET SET, BLACK 9 152.152 A/R Ring, carpet fastener 18 187.010 A/R Glue spray 151.667 1 MAIN CARPET SET, RED 10 152.153 A/R Socket, carpet fastener 19 153.056 1 Tool and jack bag 2 150.210 1 Rubber foot rest, LH side of the tunnel 11 152.019 2 Set of 10 fasteners, male on floor 20 151.122 A/R One square meter black carpet 3 150.200 1 Map pocket, black 152.035 A/R Fasteners, male on floor 151.123 A/R One square meter red carpet 4 141.148 1 Finisher, map pocket 12 152.087 A/R Rivet 21 151.097 A/R One square meter insulation felt 5 162.813 1 screw 13 151.235 1 Boot carpet set, black 22 190.229 1 MGB interiors, fitting instructions. 6 163.184 1 black cup washer 14 151.016 1 GT extra’s, black This book will show you how to 7 151.254 1 Spare wheel cover, black 151.017 1 GT extra’s, red recover your seats, fit new carpets, 7 151.255 1 Spare wheel cover, Red 8 15 121.038 2 Heel mat with MG logo recover the cockpit rail, all panels 151.374 1 Pair of foot mats, black carpet 16 187.011 A/R Glue, tube and door trim. 151.375 1 Pair of foot mats, red carpet 17 187.009 A/R Glue for carpet, insulation felt etc.

80 © Van Gestel B&C 2005 Hoods and soft tops

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 153.014 1 Hood with header rail and seal for 8 162.100 4 Screw 22 134.007 1 Seal retainer “Grey folding frame type” made 9 152.074 1 Kit, hood fasteners on body 23 152.034 A/R Rivet (set of 10) from black PVC 10 161.024 8 Nut 24 121.017 1 Seal, header rail HOODS ONLY 11 152.034 A/R Rivet (set of 10) 25 142.003 2 Socket, chrome plated 2 153.015 1 Hood only, black PVC 12 152.035 2 Stud, tonneau cover to body 26 152.005 2 Plate hood retaining 153.018 1 Hood only, black Canvas 13 152.023 2 Socket, stainless steel 27 152.056 2 Fixing kit, retainer to body 153.305 1 Hood only, black Mohair 14 152.015 2 plate under socket, polished 28 152.022 8 Fastener, hood to body 153.016 2 Hood only, white PVC stainless steel 29 187.068 1 Spray, frame paint, grey 153.017 1 Hood only, beige PVC 15 134.094 1 Back bar, hood 30 155.004 1 Folding frame, grey 153.019 1 Hood only, beige Mohair 16 134.095 1 Header rail 31 152.075 1 Kit, frame to body 3 152.015 2 Back plate 17 133.298 2 Pad, header rail 32 152.072 1 Set of 6 studs and rivets 4 152.016 2 Tongue 18 162.101 4 Screw 33 152.076 1 Kit, header rail to frame 5 152.034 1 Rivet (set of 10) 19 142.001 2 Hood catch 37 164.015 8 Washer, spring 6 153.055 2 Hood strap 20 162.051 4 Screw 38 085.052 1 Hood label 7 163.024 4 Washer, cup 21 164.015 4 Washer

© Van Gestel B&C 2005 81 Tonneau covers and luggage racks

TONNEAU COVERS There are two important things to remember when ordering tonneau covers. First, our tonneau covers listed below are FOR LEFT HAND DRIVE CARS ONLY. Secondly, there are TWO LENGHTS. When a metal dashboard is fitted, the studs placed at the front are 11 cm from the windscreen frame and when a foam padded fascia is fitted, the central front stud is more at the front; 5 cm from the windscreen frame. To avoid mistakes, please measure the overall lenght (A): 141 cm or 150 cm

IIL N° PART N° QTY DESCRIPTION IIL N° PART N° QTY DESCRIPTION IIL N° PART N° QTY DESCRIPTION

TONNEAU COVERS 3 152.015 2 Back plate 19 152.031 A/R Plate, fastener locking 1 153.025 1 Black PVC, A= 141 cm 4 152.016 2 Tongue 20 152.019 A/R Base (set of 10) 153.308 1 Black Mohair, A= 141 cm 5 152.042 1 Rivet (set of 10) 21 152.020 A/R Bottom fastener (set of 10) 153.026 1 White PVC, A= 141 cm 6 134.008 1 RH rail for cover 22 152.017 A/R Top cap (set of 10) 153.027 1 Beige PVC, A= 141 cm 7 134.009 1 LH rail for cover 23 152.018 A/R Socket (set of 10) 153.029 1 Beige Mohair, A= 141 cm 8 153.030 1 Stowage bag for cover rails 24 152.108 A/R Base on tube, one 153.045 1 Black PVC, A= 150 cm 9 150.296 1 Bag for tonneau cover, hood cover 25 185.021 2 Safety belt, European approved 153.309 1 Black Mohair, A= 150 cm 10 185.019 1 Punch & bed kit 26 185.015 2 Safety belt, European approved, 153.046 1 White PVC, A= 150 cm (for fasteners n° 27,28) automatic retractor all positions 153.049 1 Beige Mohair, A= 150 cm 11 200.419 1 Revolving punch pliers 27 140.051 1 Original type luggage rack, HOOD COVERS 12 152.009 A/R Stud, two screw base included all fittings 2 150.116 1 From black PVC 13 162.102 A/R Screw 28 162.166 6 Chrome screw, pan pozi head 150.119 1 From black Canvas 14 152.022 A/R Stud 29 163.008 6 Washer, plain 150.316 1 From black Mohair 15 163.013 A/R Washer, plain 30 164.002 6 Washer, spring 150.117 1 From white PVC 16 164.015 A/R Washer, spring 31 161.002 6 Nut 150.118 1 From beige PVC 17 161.024 A/R Nut 32 140.066 1 Universal boot rack. Alluminium 150.120 1 From beige Mohair 18 152.030 A/R ‘Lift the dot’ fastener frame with wooden slats. Easy fitting, no drilling holes

82 © Van Gestel B&C 2005 Hard top

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

155.006 1 HARD TOP ORIGINAL 16 162.060 2 Screw 32 162.149 8 Screw, window to hard top 155.007 1 HARD TOP REPLICA 17 164.015 2 Washer, spring 33 140.040 1 RH, top rail 2 152.040 A/R Rivet 18 133.124 2 Clip 140.041 1 LH, top rail 3 134.029 1 Retainer, center seal 19 162.020 2 Screw 34 133.127 2 Bracket, top corner 140.034 1 Retainer, RH rear seal 20 163.001 2 Washer, plain 35 133.128 2 Bracket, rear corner 140.035 1 Retainer, LH rear seal 21 133.125 2 Bracket, side of hard top 36 133.129 2 Bracket, front corner 4 121.047 2 Insert, seal 22 162.648 2 Washer, plain 37 120.012 2 Glass 5 121.048 1 Seal, hard top to body 23 103.010 2 Washer, plain 38 121.052 2 Glazing rubbers 6 140.037 1 LH moulding 24 164.012 2 Washer, spring 39 140.042 1 RH front rail 7 140.036 1 RH moulding 25 162.029 2 Screw, locating to hood socket 140.043 1 LH front rail 8 152.040 A/R Rivet 26 133.126 2 Bracket, side locating 40 162.150 24 Screw (6.35 mm) 9 133.123 2 Location, rear 27 121.050 1 Strip, finisher 162.151 12 Screw (12.70 mm) 10 163.010 4 Washer, plain 28 121.051 1 Rubber, back light 41 140.044 1 RH bottom rail 11 164.012 4 Washer, spring 29 120.011 1 Glass, rear 140.045 1 LH bottom rail 12 162.029 4 Screw 30 162.148 8 Screw, window finisher 42 121.053 1 RH bottom seal 13 121.049 2 Seal, door top 31 140.038 1 RH finisher window 121.054 1 LH bottom seal 14 163.037 4 Washer, cup 140.039 1 LH finisher window 15 162.152 4 Screw, door seal end

© Van Gestel B&C 2005 83 GT specials

ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION ILL N° PART N° QTY DESCRIPTION

1 121.039 1 Front glazing, rubber 17 140.026 1 RH rear finisher 28 150.025 1 Red side seal (velour) 2 120.004 1 Front screen, clear 140.027 1 LH rear finisher 150.026 1 Black side seal (velour) 120.005 1 Front screen, tinted 18 133.077 1 Finisher clip 150.027 1 RH black seal (plastic) 3 121.044 1 Filler rubber 19 134.015 1 RH ‘B’ post finisher 150.028 1 LH black seal (plastic) 4 134.011 1 Top finisher 134.016 1 LH ‘B’ post finisher 29 131.096 1 RH quarter light ass. 5 134.012 1 Bottom finisher 20 134.019 1 RH rear bottom finisher 131.097 1 LH quarter light ass. 6 134.013 1 RH finisher 134.020 1 LH rear bottom finisher 30 133.147 1 RH frame hinge 134.014 1 LH finisher 21 134.017 1 RH door finisher 133.148 1 LH frame hinge 7 133.074 1 Corner finisher, top 134.018 1 LH door finisher 31 141.059 1 RH catch toggle 8 133.075 1 Corner finisher, bottom 22 134.032 1 Seal retainer 141.060 1 LH catch toggle 9 121.040 1 Rear glazing, rubber 23 121.055 1 Rubber boot lid-outer 32 121.056 1 Rubber, glazing 10 120.009 1 Rear screen, clear & heated 24 121.032 1 Rubber boot lid-inner 33 120.013 1 RH glass, clear 120.010 1 Rear screen, tinted & heated 25 141.056 1 RH stay assembly 120.014 1 LH glass, clear 11 121.044 1 Filler, rubber 141.057 1 LH stay assembly 34 141.061 1 RH ‘A’ post finisher 12 140.022 1 RH finisher 26 141.058 1 Cover 141.062 1 LH ‘A’ post finisher 13 140.023 1 LH finisher 27 150.022 1 Red door seal (velour) 35 152.042 2 Large cap cover 14 133.076 1 Finisher, clip 150.023 1 Black door seal (velour) 36 152.043 2 Small cap cover 15 141.366 1 MGC GT letterset 150.024 1 Black door seal (plastic) 37 122.025 2 Blanking grommet 16 140.024 1 RH front finisher 140.025 1 LH front finisher

84 © Van Gestel B&C 2005 Grommets and blanking plugs

ILL N° PART N° QTY DESCRIPTION APPLICATION ILL N° PART N° QTY DESCRIPTION APPLICATION

1 122.062 2 Blanking rubber, brake and clutch 19 122.032 8 Blanking plug, clear plastic, fitted Nov 1967 on master cylinder into the floor panels 2 122.031 1 Plug, gearbox dip stick hole 20 122.215 2 Blanking plug, black rubber, Up to Nov 1967 3 121.646 1 Grommet kit for bulkhead rear shock absorber filling hole 4 122.291 1 Grommet, main wiring loom through bulkhead 122.030 2 Blanking plug, clear plastic, Nov 1967 on 5 122.016 2 Grommet, headlamp wiring loom rear shock absorber hole 6 122.005 2 Grommet, door switch wiring loom 21 122.243 2 Blanking plug, clear plastic, fitted 7 122.004 1 Grommet, windscreen washer tubing on the rear side of the boot floor 8 122.003 1 Grommet, choke cable 22 122.241 1 Blanking plug, black rubber, fitted on 9 083.097 1 Grommet, pipe oil pressure de left side of the boot floor 10 122.002 1 Grommet, capillair water temperature meter 23 122.215 1 Blanking plug, black plastic, steering Up to Nov 1967 11 122.002 1 Grommet, heater valve cable column hole 12 122.004 1 Grommet, speedo meter cable 122.030 1 Blanking plug, clear plastic, steering Nov 1967 on 122.004 1 Grommet, tacho cable column hole 13 122.006 1 Grommet, tail loom through boot floor 27 122.035 4 Cable cross rubber 14 122.004 1 Grommet, vent hose fuel side of the fuel pump 28 133.179 4 Bracket 122.004 1 Grommet, vent hose contact breaker side 29 164.012 8 Washer, spring of the fuel pump 30 161.019 8 Nut 15 122.002 1 Grommet, wiring loom to tank unit 31 122.034 1 Cable cross rubber 16 122.005 2 Grommet, wiring loom number plate lamps 32 133.178 1 Bracket 18 122.032 4 Blanking plug, clear plastic, fitted 33 162.005 2 Screw into the front of the door 34 164.002 2 Washer, spring

© Van Gestel B&C 2005 85 Weber carburettors and accessories

Part nr. 106.077 Weber inlet manifold kit Including linkage This quality manifold kit comes complete with 3 inlet manifolds made from cast aluminium and all linkage parts. Here to the left you can see a complete set-up on an MGC including Weber carburettors and K&N airfilters (ask your Anglo Parts shop for more info on K&N filters). See below for other parts, quantities marked in red are for a complete set-up

Part nr. 101.340 Preset fuel pipe set • Aeroquip made for your triple Webers Part nr. • Easy to install 106.001 One Weber 45 DCOE carburettor assembly Part nr. For maximum power, we recommend that you set up the Webers to your 106.008 & your engine’s specific requirements. Have it done by a professional, read the specific books Rampipe 45 (190.416 or 190.428) To be used with the K&N air filters (order 3 Webers!) (order 6 pieces)

Part nr. Part nr. Part nr. 106.002 Part nr. 106.004 106.003 Gasket, 106.086 sealing ring on plate (order per 3 ) Sock type high performance Cup washer Grommet, (order per 24) vibration filters for Webers (order per 12)

Part nr. Part nr. Part nr. 190.428 101.422 190.416 Speedpro Haynes series, Weber carburettor & Dellorto workshop DCOE & DHLA manual Carburettors, the This manual covers Breather hose sidedraft carburettors, Weber, Stromberg & adaptor how to build, power tune, SU carburettors. Many For connecting the strip and rebuild. How to illustrations and excellent breather hose into the get the right set up for step by step explainations. filter backplate 1/2” your engine. 112 pages 350 pages Flange, 3/4” long

86 © Van Gestel B&C 2005 Engine and power tuning

Part nr. 000.000

Part nr. Part nr. 181.055 Formula Power lead sets Tuning SU Carburettors 190.225 Super lead set, originally developed for race. Minimum loss Most mechanics and enthusiasts struggle when setting the twin SU carburettors correctly. This and greatly extended cable life. Spiral magnetic 4 core book and a bit of practice will solve the problem. It is very important for your 10mm blue silicon extreme heat resistance. engine that the carburettor Can also be fitted to a much more powerful tuning is correct. This book coil if needed. also covers all SU fuel pumps. 189 pages

Part nr. 198.017

Part nr. Form -A- Gasket nr. 1372, 082.149 200 ml gasket cement tube. Use on both sides of a gasket or direct Modern lightweight on the surface. Specially for high temperatures up to 315°C. replacement Also useful for exhaust pipe fitting.

starters Part nr. This modern reliable starter 016.269 gives more torque with less power drain when starting, Form -A- Gasket Nr.1, this makes it ideal for daily use. 200ml gasket cement, tube They are also easier to install as they Use on both sides of the gasket are much lighter and smaller or direct on the surface. Part nr. 011.589 Spin-on oil filter With relief valve

Part nr. 011.205 Spin-on oil filter conversion Oil filter changes can be quick, clean and painless if you have got a spin-on oil filter. Convert now and get rid of your messy cannister style filter

Part nr. 024.208 Close ratio gearkit Straight cut for 4 synchro gearbox

© Van Gestel B&C 2005 87 Engine and power tuning

Part nr. 086.401 Oil temperature adaptor 5/8” UNF With 1/2” BSP male/female connectors

Part nr. 185.622 Oilstat, 1/2” BSP male

5/8” UNF BSP size 1/2” parallel thread, male O.D. = 13/16” or 20.6 mm

Part nr. Function The oilstats are designed to prevent flow of engine oil 086.326 Mechanical oil through the cooler until a 80°C temerature is reached. Prolonged use of a car engine in conditions where the oil cannot reach its correct temperature gauge working temperature will cause sludge formation and crankcase oil Water temp in C° dilution, leading to excessive wear especially in the cylinder bores. Optimum engine power will only be delivered at correct temperatures. The elimination of drag in engines caused by cold oil is a most important consideration, especially with a tuned engine. Operation Control of the oil flow in the thermostat is effected by a wax filled capsule, known as a “Waxstat”. The “waxstat” used is set to direct oil through the cooler at 80°C. Part nr. Construction The bodies of the thermostats are precision die cast 053.295 Brake pads aluminium units. The “Waxstat” is a mass produced proprietary unit, Only the best of the best for your MGC! These • no black dust subject to the most stringent quality controls. • no disc damage magnificent brake pads will fit into your standard Fitting The thermostat can be fitted in any convenient place where • no warm up, instant response of cold the oil pipes run parallel. This is a more professional version that MGC brake callipers, but enlarging the pad area with 20%. • lasts for 15 - 32.000 KM requires that the pipes have 1/2 BSP female connections. The weight • an ideal solution for all classics, whether of the thermostats are such that the hoses will support them without Part nr. normal road or competition use. sagging, however a bracket is supplied with the slightly heavier 185.622 if further restraint is desired. 053.082 Lockheed servo After easy installation you will achieve maximum braking power. WARNING! Fitting a brake servo will not cure faulty brakes, therefor ensure that your braking system is in good working condition.

Part nr. 050.306 Grooved Discs Improve your braking greatly with these modern treated brake discs.

Part nr. 185.128 Kenlowe Cooling fan kit If your MGC suffers from overheating in modern traffic during high summer ambient we recommend the Kenlowe is used in addition to the engine fan to provide extra cooling. Mounting The standard specification includes adjustable body/chassis mountings to secure the fan adjacent to but not connected to the radiator - totally adjustable and therefore suitable for almost every vehicle. A no-cost option is direct radiator fitting incorporating moulded mountings that extend beyond the fan to provide a simple secure four point mounting without drilling, or use of spanners. (not recommended for aluminium core radiators). Automatic Control Adjustable between 45 deg. C° and 120 deg. C° with 3 deg. C° differential. Advanced heavy-duty design allows continious on/off switching without a relay. A Simple sensor entry using patented silicone extruded rubber seal for capillary provides watertight entry without cutting hose or drilling radiator - see diagram.

88 © Van Gestel B&C 2005 Suspension and Superflex bushes

FRONT SUSPENSION Ill. n° Partn° Description Qty

9 1 041.511* Top trunnion 2 2 048.166* Outer fulcrum 2 3 3 048.161* Top wishbone 4 4 048.162* Tie-bar front 2 5 048.163 Tie-bar rear 4 6 048.164* Torsion bar - bush 2 7 048.165 Anti-roll bar 2 8 041.507 Damper eye 2 6 8 9 041.922 Damper pin 4 • Easy to fit • Durable 1 • Oil resistant • Self lubricating REAR SUSPENSION Ill. n° Partn° Description Qty 4 • Improved location • Long life 10 041.513* Spring eye 2 3 • Tough • 2-Year road warranty 11 041.515 Spring pad 4 • Non-perishing • Stainless 12 041.514 Spring shackle bush 8 steel sleeved (where aplicable) Parts marked with * denote stainless steel sleeve 7 Fitting info 12 2 All bushes will press in with the aid of a suitable vice with exception of 048.166 which may be fitted with a void bush puller, or cut in half at the wasted centre and fit from each end. This bush should have the large flange at the rear of the Kingpin.

11

5 10

Part nr. 041.514 Rear bush, polyurethane

Part nr. 042.640 Conversion bracket kit for Spax Part nr. dempers 041.515 Pad, spring in polyurethane

Part nr. 185.139 Uprated valve for rear shock absorber

Part nr. Part nr. 042.351 042.421 Car lowering kit Anti-tramp kit anti-bar kit

© Van Gestel B&C 2005 89 Steering wheels and quality verneer dashboards

These quality accessories are made from strong, finely finished solid wood. They are a must for the classical driver who likes that bit of extra finesse. Since the early fithties Moto-Lita has been designing and manufacturing unique steering wheels in wood and leather. Each steering wheel is a piece of artwork built by British craftsman. The wooden steering wheels are made from carefully selected cross-laminated timber which is bonded and rivetted to a high quality hand polished alloy 3 spoke frame. They are then handfinished with a hardwearing deep lustre which is resistant to petrol, oil and the elements.

Mark 3 Woodrim Mark 3 Leather 185.025 33cm Flat 185.155 33cm Flat 185.026 35cm Flat 185.156 35cm Flat 185.082 Boss, up to 1969 European and up to 185.027 38cm Flat 185.157 38cm Flat 1968 USA models 185.245 33cm Dish 185.246 33cm Dish 185.089 Boss, for USA 1968 and 1969 models 185.247 35cm Dish 185.248 35cm Dish without horn push Please note that Motolita Steering Wheels, shown on this page, are not original equipement and may not be legal for street use. Please check if the use of them is legal in your country or not. High quality walnut veneer dashboards These dashboards are made from a thin layer of walnut verneer on a sturdy backplate with a thick layer of gloss varnish. They are made to stick on the existing dashboard without having to screw or make holes. Applying these dashboards is easy and the finish is magnificent

Part nr. 150.895 European up to 1969

90 © Van Gestel B&C 2005 Accessories, oil and body styling

Part nr. Part nr. 046.062 Works type 086.461 gear knob 15” x 6” made in aluminium with a built-in overdrive switch Alloy Part nr. wheel 023.365 Knob Part nr. Gear change 284.092 Rear fog lamp Styled with chrome rim

Part nr. 300.137 Automatic transmission oil Part nr. Specially formulated for classic automatic transmissions Part nr. 046.024 300.116 15” x 6” Mild EP, 1 litre Centre lock An SAE 140 grade gear oil suitable for use in bevel, worm and pre-1960 hypoid gears. alloy Rated GL4 this gear oil does not possess the wheel additive package found in later GL5 gear oils which should not be used in veteran and vintage vehicles as the additive packages in these oils attack metals such as bronze, brass and copper.

Part nr. 131.322 Sebring Rear Valance from fiberglass The rear bumper must be removed. Part nr. 232.721 Stylish MGC chrome plated Mesh kit This mesh kit comes with fitting parts & instructions. Same style as Part nr. fitted on early Jaguars, Bentleys and modern day Jaguars. 131.785 Sebring set of four wings Front spoiler NOT included !!!!

not included

Part nr. 185.103 Pair perspex headlamp cowls Gives your lights that extra protection against Part nr. stones & debry when racing & rallying 131.786 Sebring front spoiler • 133.869 - fitting kit for cowls

© Van Gestel B&C 2005 91 Plates, labels, stickers and patches

Part nr. Part nr. 085.070 085.071 MGC Roadster MGC GT

Part nr. Part nr. 085.002 085.059 Rocker cover Chassis plate 1966-’70

Part nr. 085.003 Rocker cover Part nr. 085.006

Part nr. 085.005 Negative earth Part nr. 085.007

Part nr. 085.014 Battery Part nr. warning 085.008

Part nr. Part nr. For heaterbox& motor 085.080 085.074 Triplex Girling Part nr. laminated 085.011 Coopers air filter

Part nr. 085.042 Washer bottle sticker

Part nr. 152.034 Part nr. 085.037 Set of 10 Tecalemit rivets

Part nr. 152.110 Set of 10 screws & BMC Stickers nuts 6-32 UNC x 1/4” 085.085 on screen Tire pressure label 085.086 on body 085.050 MGC 085.051 MGC GT Part nr. 152.109 Set of 10 studs for Part nr. rocker cover plates etc. 085.122 MG sticker

Part nr. 185.002 Union Jack badge in jewellers enamel

92 © Van Gestel B&C 2005 Books and CD-roms

Part nr. Part nr. 190.119 190.729 MG, Britain’s favourite sports car (by Malcolm Green) MGC owners This second edition from ‘Haynes Classic makes Series’ brings the MG story right up to date. This well-illustrated book charts all MGs from 1923 to present day. Also

handbook concentrates on models with particularly strong interest to classic car enthusiast. As supplied with all new MGC’s. With The authoritative text is supported with buying tips, impressions and data boxes. detailed and practical information about 176 pages, 150 b&w & colour illustrations. hardback. your MGC, such as putting up the soft top and routine maintenance etc. All illustrations in B&W except cover.

Part nr. 190.223 Original Series For correct and precise information on definitve factory specifications in every detail, from chrome trim to plug leads, there’s no better place to look than these books. Whether owner, buyer, restorer or enthusiast, you’ll find a combination of minutely reserched text and magnificent full-colour photographs - all specially commissioned - to tell you what you need to know. Hailes by magazine reviewers worldwide. The ‘Originals’ series is the works. Size 295 x 225 mm.

Part nr. Part nr. 190.320 Very handy parts & 190.486 The MG Collection accessories books Enthusiasts colour series These two books are full of parts for The post-war models your MGC and other classic British cars. MG sports cars (by Richard Monk) Part nr. (By John Heilig) The MG collection is a unique record of the 190.002 MGB parts & A full colour gallery of MG sports cars post-war MG models and is the sequel to the including pre-war chummy, Midgets, J- author’s companion book on pre-war MGs. accessories catalogue series, MGTA & MGTB and post-war series: He has tracked down and photographed an 276 pages, more than 1000 colour photos MGTC-D-F, MGA, MGB, MGC and Midget. example of practically every model and most Part nr. Also includes MGV8, MGRV8 & MGF. With of the variants, with all cars being original as 190.058 British parts, tools model histories, evolution, specifications and possible. From MGTC 1948 to MGF 1998. 177 and accessories catalogue technical notes. pages and fully illustrated in colour. 144 pages, more than 1400 colour photos Original PC CD-rom Technical Publications The parts catalogue, workshop manual and driver’s handbook you need for your classic British car! Now for the first time owners and enthusiasts have the opportunity to effortlessly collect all these original publications for their car, on one handy and cost-effective CD Rom!

Part n° Description Part n° Description

192.001 Morris Minor, 1948-’71 192.014 MGTA, TB, TC, TD & TF, 1936-’55 192.002 Triumph TR2-3-3A, 1953-’62 192.015 MGA & twin cam, 1955-’62 192.003 Triumph TR4-4A-5-250, 1961-’68 192.016 MGB & MGB GT, 1962-’69 192.004 Triumph TR6,1969-76 192.017 MGB & MGB GT, 1970-’74 192.005 Triumph TR7-8, 1975-’81 192.018 MGB & MGB GT, 1974-’80 192.006 Triumph Spitfire, 1962-’80 192.019 MGC & MGC GT, 1967-’69 192.007 Triumph GT6, 1966-’73 MGB GT V8, ‘72-’76 & MGR V8, ‘92-’96 192.008 Triumph Stag, 1970-’77 192.020 MG Midget & AH Sprite, 1964-’74 192.009 AH 100 & 100/6, 1953-’59 192.021 MG Midget 1500, 1974-’79 192.010 AH 3000, 1959-’68 192.022 Mini range MKI-II, 1959-’69 192.011 AH Sprite & MG Midget, 1957-’64 192.023 Mini range MKIII-IV, 1969-’85 192.012 BMC 1100 & 1300 range, 1962-’74 192.024 Mini + Cabrio, 1985-’00 192.013 Special tuning data & parts, 1950-’76 192.025 Mini Derivative models, 1964-’1991

© Van Gestel B&C 2005 93

How to find us! ANGLO PARTS FAX ORDERFORM Client n° : Date :

Name : Shipping address if different : Address :

Country : Country : Tel/Fax : Model : Year : Chassis n° : E-mail : Engine n° :

Quantity Part n° Page n° Illustr. n° Description 1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

To be shipped Will be collected Backorders, parts not in stock or available at this moment/ required or not

Payment : Visa Euro-card - Master card - Access

Card n°. :

Exp. date : badge code : Signature :

Fax numbers BELGIUM Fax +32 15 42 34 45 • NETHERLANDS, BOVEN-LEEUWEN Fax +31 318-551395 ITALY Fax +39 0422 321 470 • GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73 NETHERLANDS, GRUBBENVORST Fax +31 318-551395 • SPAIN Fax +34 93 225 27 91 LUXEMBOURG Fax +352 518151-820 • HUNGARY Fax +36 1 254 08 08 CZECH & SLOVAK REPUBLIC Fax: +42(0) 383 382 161

Quality Parts & Service

© Van Gestel B&C 2005 95 Notes

96 © Van Gestel B&C 2005 DOWNLOAD OUR OTHER ANGLO PARTS & ACCESSORIES CATALOGUES FOR FREE! download the pdf versions of our catalogues for free at www.angloparts.com or buy them for 10 euros per item.

MGTC MGA MGC part n° 190.275 part n° 190.001 part n° 190.158 MGTD-TF MGB MGF-TF 1996-2005 part n° 190.067 part n° 190.002 part n° 190.519

Sprite-Midget 1958-’64 A.H. 100/4-3000 part n° 190.504 part n° 190.509 Land Rover Defender 90-110 Sprite-Midget 1965-’80 Mini 1969-2000 1984-2006 part n° 190.518 part n° 190.720 part n° 190.779

Triumph TR2-4A Triumph Spitfire part n° 190.243 part n° 190.133 Triumph GT6 Triumph TR5-250-6 Morris Minor part n° 190.273 part n° 190.863 part n° 190.718

Jaguar XK120-150 Jaguar E-type part n° 190.694 part n° 190.695 Jaguar MKII-Daimler V8 Jaguar XJ, Series I, II, III British Parts, Tools & Accessories part n° 190.721 part n° 190.780 part n° 190.058

© Anglo Parts nv 2016 Quality Parts & Service MGC 1967-1969 PARTS & ACCESSORIES CATALOGUE

www.angloparts.com please visit our website for all contact information

Anglo Parts Shops MAIN BRANCH BELGIUM NETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts Dealers FRANCE • NETHERLANDS • SPAIN SWEDEN • FINLAND • SWITZERLAND CZECH REPUBLIC • SLOVAKIA LUXEMBOURG • POLAND • HUNGARY

Fourth Edition • 190.158 Quality Parts & Service