Pro Tools® Guide Version 9.0 Legal Notices This guide is copyrighted ©2011 by , Inc., (hereafter “Avid”), with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written consent of Avid.

003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O, 882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite, Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS, Avid Xpress, AVoption, Axiom, Beat Detective, Factory, Bruno, |24, Command|8, Control|24, D-Command, D-Control, D-Fi, D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase, DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive, DigiRack, DigiTest, DigiTranslator, DINR, DV Toolkit, EditPack, Eleven, EUCON, HD Core, HD Process, Hybrid, Impact, Interplay, LoFi, M-Audio, MachineControl, Maxim, Mbox, MediaComposer, MIDI I/O, MIX, MultiShell, Nitris, OMF, OMF Interchange, PRE, ProControl, Pro Tools M-Powered, Pro Tools, Pro Tools|HD, Pro Tools LE, QuickPunch, Recti-Fi, Reel Tape, Reso, Reverb One, ReVibe, RTAS, , Smack!, SoundReplacer, Sound Designer II, Strike, Structure, SYNC HD, SYNC I/O, Synchronic, TL Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, Transfuser, Trillium Lane Labs, Vari-Fi, Velvet, X-Form, and XMON are trademarks or registered trademarks of Avid Technology, Inc. Xpand! is Registered in the U.. Patent and Trademark Office. All other trademarks are the property of their respective owners.

Product features, specifications, system requirements, and availability are subject to change without notice.

Guide Part Number 9329-65056-00 REV C 2/11

Documentation Feedback At Avid, we are always looking for ways to improve our documentation. If you have comments, corrections, or suggestions regarding our documentation, email us at [email protected]. Pro Tools Shortcuts (for Pro Tools Systems on Mac and Windows)

For increased operational speed and ease-of-use, there are many Pro Tools® keyboard and right-click shortcuts to give you fast access to a wide variety of tasks. This guide lists all keyboard shortcuts and Right-click shortcuts available in each of Pro Tools, and are grouped by functional area for your added convenience and quick reference.

Menu commands that have a keyboard display their on-screen, to the right of the command.

Conventions Used in This Guide

Our guides use the following conventions to indicate menu choices and key commands:

Convention Action

File > Save Session Choose Save Session from the File menu.

Command+N/Control+N Hold down the Command (Apple) key (Mac) or the Control (Ctrl) key (Windows) and press the N key.

Option+Plus/Minus (+/–) keys Hold down the and press the Plus (+) or Minus (–) key (on or QWERTY, as noted).

Command-click (Mac Only) Hold down the and click the .

Right-click Click with the right mouse button.

Pro Tools Shortcuts 1 Keyboard Shortcuts

Global Keyboard Shortcuts

The following shortcuts can be used in all Pro Tools windows for the features noted.

Actions Mac Windows Parameter change • Automation • Monitor mode • playlist enable • , solo and mute enable • record and solo safes • inserting plug-ins • I/O, bus, send assignment • volume/peak indicator • extend Edit or Timeline selection • track height • clear clip meter

Change parameter on all channel Option+applicable function (appli- Alt+applicable function (applicable strips cable functions listed above) functions listed above)

Change parameter on all selected Option+Shift+applicable function Alt+Shift+applicable function channel strips (applicable functions listed directly (applicable functions listed above) above)

Toggle • Tracks in Track List • Group enables/activation • Automation Enable window • Memory Location parameters

Toggle item and set all others to Option-click on applicable item Alt-click on applicable item (appli- same new state (applicable items listed above) cable items listed above)

Toggle item and set all others to Command-click on applicable item Control-click on applicable item opposite state (applicable items listed directly (applicable items listed above) above)

Fine Tune adjustment • Plug-in parameter editing • fader movement • scrubbing • automation data trimming (requires larger Track View for highest resolution)

Fine Tune (Fine Adjust mode) Command-click on applicable Control-click on applicable fader/pot/breakpoint function fader/pot/breakpoint function (applicable functions listed above) (applicable functions listed above)

Multi-select • Tracks • regions in Region List • paths in I/O Setup

Select multiple contiguous items Click to select first item, then Shift- Click to select first item, then Shift- (tracks, regions, paths) click another to select all similar click another to select all similar items between (applicable items items between (applicable items listed above) listed above)

Select multiple non-contiguous Click to select first item, then Com- Click to select first item, then Con- items (tracks, regions, paths) mand-click another to select all trol-click another to select all simi- similar items between (applicable lar items between (applicable items listed above) items listed above)

2 Pro Tools Shortcuts Guide Pro Tools Edit Window and Mix Window Keyboard Shortcuts

The following keyboard shortcuts can be used in the Edit WIndow and Mix Window for the features noted.

Action Mac Windows Playback

Start/stop playback Spacebar Spacebar

Half-speed playback Shift+Spacebar Shift+Spacebar

Pause (pre-prime deck for instant playback Control+Spacebar, or Option- Start+Spacebar, or Alt-click and record) click, on Transport Play button on Transport Play button

Enable/disable online playback Command+J, or Ctrl+J, or Alt+Spacebar Option+Spacebar

Center on selection start/end Left/Right keys (when Left/Right (when selection exceeds window selection exceeds window view) view)

Play Edit selection Option+[ Alt+[

Back/Forward (move the playback location Command+Transport Rewind Ctrl+Transport Rewind button backwards/forwards by the Back/Forward button or Transport Fast For- or Transport Fast Forward but- amount) (Pro Tools HD only) ward button ton

Back/Forward and Play (move the playback Command+Option+Transport Ctrl+Alt+Transport Rewind location backwards/forwards by Back/Forward Rewind button or Transport button or Transport Fast For- amount and then begin playback) (Pro Tools Fast Forward button ward button HD only)

Extend a selection backwards by the Back/For- Shift+Command+Transport Shift+Ctrl+ Transport Rewind ward amount (Pro Tools HD only) Rewind button or Transport button or Transport Fast For- Fast Forward button ward button

Extend the selection backwards by the Shift+Com- Shift+Ctrl+Alt+Transport Back/Forward amount and begin playback mand+Option+Transport Rewind button or Transport (Pro Tools HD only) Rewind button or Transport Fast Forward button Fast Forward button

Loop playback toggle Command+Shift+L, or Con- Ctrl+Shift+L, or Start-click on trol-click on Transport Play Transport Play button button

Dynamic Transport Mode toggle Command+Control+P Ctrl+Start+P

Transport Master toggle (Pro Command+Backslash (\) Ctrl+Backslash (\) Tools/Machine/MMC)

Solo-safe track Command-click on track Solo Ctrl-click on track Solo

Pro Tools Shortcuts 3 Action Mac Windows Record

Start record Command+Spacebar, F12, or Ctrl+Spacebar, or F12, or 3 3 (on numeric keypad)* (on numeric keypad)

Stop record Spacebar Spacebar

Stop record and discard recording take (not Command+Period (.) Ctrl+Period (.) undoable)

Half-speed record Command+Shift+Spacebar, Ctrl+Shift+Spacebar, or or Shift+F12* Shift+F12

Enable/disable online record Command+Option+Space- Ctrl+Alt+Spacebar bar*

Record-safe track Command-click on track Ctrl-click on track Record Record Enable button Enable button

Cycle through record modes: normal, Destruc- Control-click on Transport Start-click on Transport tive, Loop, QuickPunch™, TrackPunch, Record Enable button Record Enable button DestructivePunch

Loop Record toggle Option+L Alt+L

TrackPunch toggle (Pro Tools HD only) Command+Shift+T Ctrl+Shift+T

QuickPunch toggle Command+Shift+P Ctrl+Shift+P

Enter/Exit record during playback in Quick- Command+Spacebar, F12, or Ctrl+Spacebar, F12, or click Punch click Transport Record but- Transport Record Enable but- ton* ton

DestructivePunch or TrackPunch enable/dis- Control-click the track’s Start-click the track’s Record able an audio track Record Enable button Enable button

DestructivePunch or TrackPunch enable/dis- Option-Control-click a track’s Alt-Start-click a track’s Record able all audio tracks Record Enable button Enable button

DestructivePunch or TrackPunch enable/dis- Control-Option-Shift-click a Start-Alt-Shift-click a track’s able all selected audio tracks track’s Record Enable button Record Enable button

Simultaneously DestructivePunch or Track- Option-click a track’s Record Alt-click a track’s Record Punch enable/disable and record enable/dis- Enable button Enable button able all audio tracks

Simultaneously DestructivePunch or Track- Option-Shift-click a track’s Alt-Shift-click a track’s Record Punch enable/disable and record enable/dis- Record Enable button Enable button able all selected audio tracks

Temporarily force all VCA slave tracks to toggle Option-click the VCA Record Alt-click the VCA Record their record enable status (Pro Tools HD only) Enable button Enable button

4 Pro Tools Shortcuts Guide Action Mac Windows

Temporarily force all VCA slave tracks to toggle Option-click the VCA TrackIn- Alt-click the VCA TrackInput their Track Input status (Pro Tools HD only) put button button

Enable or disable pre/post-roll time Command+K Ctrl+K

Set and enable pre/post-roll time Option-click with Selector Alt-click with Selector tool before or after selection before or after selection

Disable and set to zero pre/post-roll time Option-click within selection Alt-click within selection closer to front or back closer to front or back *Some Pro Tools recording shortcuts use the same key commands as some Mac OS X shortcuts. If you want to retain use of these key commands in Pro Tools, these OS X shortcuts must be disabled. For more infor- mation, see your Setup Guide. Transport Mode using Numeric Keypad • Select Numeric Keypad: Transport in the Operations Preferences page.

Play/Stop 0 0

Rewind 1 1

Fast Forward 2 2

Record Enable 3 3

Loop Playback mode on/off 4 4

Loop Record mode on/off 5 5

QuickPunch mode on/off 6 6

Click on/off 7 7

Countoff on/off 8 8

MIDI Merge/Replace mode on/off 9 9

Shuttle Mode using Numeric Keypad (Pro Tools HD only) • Select Shuttle mode in the Operations Preferences page.

1 x Forward playback speed 6 6

1 x Rewind playback speed 4 4

4 x Forward playback speed 9 9

4 x Rewind playback speed 7 7

1/4 x Forward playback speed 3 3

1/4 x Rewind playback speed 1 1

Pro Tools Shortcuts 5 Action Mac Windows

1/2 x Forward playback speed 5+6 5+6

1/2 x Rewind playback speed 5+4 5+4

2 x Forward playback speed 8+9 8+9

2 x Backward playback speed 8+7 8+7

1/16 x Forward playback speed 2+3 2+3

1/16 x Backward playback speed 2+1 2+1

Loop playback of Edit Selection 0 0

Recall Memory Location Period (.)+Memory Loca- Period (.)+Memory Loca- tion+Period (.) tion+Period (.)

Scrub (Jog)/Shuttle

Temporary Scrub mode when using Selector Control-click and drag Start-click and drag

Extend selection while scrubbing Shift-click and drag with the Shift-click and drag with the Scrubber tool, (also in tempo- Scrubber, (also in temporary rary Scrub mode) Scrub mode)

Shuttle Option-click-drag with Scrub- Alt-click-drag with Scrubber, ber tool, (also in temporary (also in temporary Scrub Scrub mode) mode)

Shuttle Lock (Classic or Transport mode) Control+number key 1–9 Start+number key 1–9 (1=minimum, 5=real-time, (1=minimum, 5=real-time, 9=maximum) 9=maximum)

Change direction during Shuttle Lock (Classic Plus/Minus (+/–) keys Plus/Minus (+/–) keys or Transport mode) For example, Control+num- For example, Start+num- ber+Minus (–) key ber+Minus (–) key

Shuttle Lock stop (Classic or Transport mode) 0 (press number key to 0 (press number key to resume shuttle) resume shuttle)

Exit Shuttle Lock mode (Classic or Transport Spacebar or Escape (Esc) key Spacebar or Escape (Esc) key mode)

6 Pro Tools Shortcuts Guide Action Mac Windows Auditioning • These shortcuts are active only when Transport is Pro Tools

Play by pre-roll value up to selection start/end Option+Left/Right Arrow keys Alt+Left/Right Arrow keys (or current location if no selection)

Play by post-roll value from selection start/end Command+Left/Right Arrow Ctrl+Left/Right Arrow keys (or current location if no selection) keys

Play by pre- and post-roll value through selec- Command+Option+ Ctrl+Alt+Left/Right Arrow tion start/end Left/Right Arrow keys keys

Auditioning • These shortcuts are active only when Transport is MMC

Cue Transport to selection start/end Command+Left/Right Arrow Ctrl+Left/Right Arrow keys keys

Cue Transport with pre/post-roll to selection Option+Left/Right Arrow keys Alt+Left/Right Arrow keys start/end

Edit Modes and Edit Tools

Shuffle mode F1, or Alt+1 (on QWERTY key- F1, or Option+1 (on QWERTY board) keyboard)

Slip mode F2, or Alt+2 (on QWERTY key- F2, or Option+2 (on QWERTY board) keyboard)

Spot mode F3, or Alt+3 (on QWERTY key- F3, or Option+3 (on QWERTY board) keyboard)

Grid mode F4, or Alt+4 (on QWERTY key- F4,or Option+4 (on QWERTY board) keyboard)

Enable Snap To Grid while in another Edit Shfit+F4 Shfit+F4 mode

Enable Snap to Grid and Shuffle mode F1+F4 F1+F4

Enable Snap to Grid and Slip mode F2+F4 F2+F4

Enable Snap to Grid and Spot mode F3+F4 F3+F4

Zoomer tool F5, or Command+1 (on F5, or Ctrl+1 (on QWERTY key- QWERTY keyboard) board)

Trimmer tool F6, or Command+2 (on F6, or Ctrl+2 (on QWERTY key- QWERTY keyboard) board)

Selector tool F7, or Command+3 (on F7, or Ctrl+3 (on QWERTY key- QWERTY keyboard) board)

Pro Tools Shortcuts 7 Action Mac Windows

Grabber tool F8, or Command+4 (on F8, or Ctrl+4 (on QWERTY key- QWERTY keyboard) board)

Scrubber tool F9, or Command+5 (on F9, or Ctrl+5 (on QWERTY key- QWERTY keyboard, if board) Mac OS X Expose is disabled)

Pencil tool F10, or Command+6 (on F10, or Ctrl+6 (on QWERTY QWERTY keyboard, if keyboard) Mac OS X Expose is disabled)

Smart Tool F6+F7, F7+F8, or Com- F6+F7, F7+F8, or Ctrl+7 (on mand+7 (on QWERTY key- QWERTY keyboard) board)

Cycle through Edit modes Single Quote (‘) key, Single Open Quote (‘) key, located above the key located above the

Cycle through Edit tools Escape (Esc) key Escape (Esc) key, or Center- click

Lock out or unlock Shuffle Mode Command-click the Shuffle Ctrl-click the Shuffle button button

Edit Selection, Definition, and Navigation

Enable or disable Tab to Transients command Command+Option+Tab Ctrl+Alt+Tab

Locate cursor to next transient Tab (if Tab to Transient Tab (if Tab to Transient enabled) enabled)

Locate cursor to previous transient Option+Tab (if Tab to Tran- Ctrl+Tab (if Tab to Transient sient enabled) enabled)

Locate cursor to next region-boundary/sync Tab (if Tab to Transients but- Tab (if Tab to Transients but- point ton is disabled) ton is enabled)

Locate cursor to previous region bound- Option+Tab (if Tab to Tran- Ctrl+Tab (if Tab to Transients ary/sync point sients button is disabled) button is enabled)

Go to and select next region Control+Tab Start+Tab

Go to and select previous region Control+Option+Tab Start+Ctrl+Tab or Start+Ctrl

Go to Song Start Control+Return Start+Enter

Extend selection to Song Start Shift+Control+Return Shift+Start+Enter

Extend selection to next region-boundary Shift+Tab Shift+Tab

Extend selection to previous region-boundary Option+Shift+Tab Ctrl+Shift+Tab

Extend selection to include next region Control+Shift+Tab Start+Shift+Tab

8 Pro Tools Shortcuts Guide Action Mac Windows

Extend selection to include previous region Control+Shift+Option+Tab Start+Shift+Ctrl+Tab

Return to start of session Return Enter

Go to end of session Option+Return Ctrl+Enter

Extend selection to start of session Shift+Return Shift+Enter

Extend selection to end of session Option+Shift+Return Ctrl+Shift+Enter

Link Timeline and Edit selection Shift+Forward (/) Shift+Forward Slash (/)

Set selection start/end during playback Down/Up Arrow keys Down/Up Arrow keys

Set selection start/end to incoming time code Down/Up Arrow keys Down/Up Arrow keys while stopped

Select entire region in Edit window Double-click with Selector Double-click with Selector tool

Select entire track in Edit window Triple-click with Selector, or Triple-click with Selector tool, single-click in track and press or single-click in track and Command+A press Ctrl+A

Select all regions in all tracks in Edit window Return, then press Com- Enter, then press Ctrl+A mand+A

Extend cursor or selection across all tracks Enable “All” Edit group and Enable “All” Edit group and Shift-click on any other track Shift-click on any other track

Move the selection forward by the selection Command+Con- Ctrl+Alt+Start+Apostrophe (’) amount trol+Option+Apostrophe (’)

Move the selection backward by the selection Command+Control+Option+L Ctrl+Alt+Start+L amount

Double the length of the Edit selection Command+Con- Ctrl+Alt+Start+Shift+Apostro- trol+Option+Shift+ Apostro- phe (’) phe (‘)

Halve the length of the selection Command+Con- Ctrl+Alt+Start+Shift+L trol+Option+Shift+L

Cancel Zoom toggle and remain at the same Option+Shift+E Alt+Shift+E zoom level

Fit all shown tracks in the Edit window Command+Option+Con- Ctrl+Alt+Start+Up trol+Up arrow or Down arrow

Record enable tracks that contain the Edit cur- Shift+R Shift+R sor or Edit selection

Pro Tools Shortcuts 9 Action Mac Windows

TrackInput Monitor enable tracks that contain Shift+I Shift+I the Edit cursor or Edit selection (Pro Tools HD only)

Solo tracks that contain the Edit cursor or Edit Shift+S Shift+S selectio

Mute tracks that contain the Edit cursor or Edit Shift+M Shift+M selection

Move the insertion to the beginning of the Edit Down arrow Up arrow selection

Move the insertion to the end of the Edit selec- Up arrow Down arrow tion

Increase or decrease the height of any lane Control+Up/Down Arrow Start+Up/Down Arrow that contains the Edit cursor or an Edit selec- tion

Editing, Nudging, and Trimming • In the following shortcuts, the Plus/Minus (+/–) key usage is on the numeric keypad only.

Change Grid value Control+Option+Plus/Minus Start+Alt+Plus/Minus (+/–) (+/–) keys keys

Change Nudge value Com- Ctrl+Alt+Plus/Minus (+/–) mand+Option+Plus/Minus keys (+/–) keys

Nudge back by next Nudge value Minus (–) key (on numeric key- Minus (–) key (on numeric key- (Nudge Edit selection and any regions entirely pad), or Comma (,) (in Com- pad), or Comma (,) (in Com- inside the Edit selection) mands Keyboard Focus) mands Keyboard Focus)

Nudge forward by next Nudge value Plus (+) key (on numeric key- Plus (+) key (on numeric key- (Nudge Edit selection and any regions entirely pad), or Period (.) (in Com- pad), or Period (.) (in Com- inside the Edit selection) mands Keyboard Focus) mands Keyboard Focus)

Nudge start/end data to right/left by Nudge Shift+Plus/Minus (+/–) keys Shift+Plus/Minus (+/–) keys value (keeps underlying audio and moves start/end)

Nudge data within current region to right/left Control+Plus/Minus (+/–) Start+Plus/Minus (+/–) keys by Nudge value (keeps region start/end and keys moves underlying audio)

Nudge left selection boundary right/left by Option+Shift+Plus/Minus Alt+Shift+Plus/Minus (+/–) Nudge value (+/–) keys keys

Nudge right selection boundary right/left by Com- Ctrl+Shift+Plus/Minus (+/–) Nudge value mand+Shift+Plus/Minus keys (+/–) keys

10 Pro Tools Shortcuts Guide Action Mac Windows

Trim left edge of region to right/left by Nudge Option+Plus/Minus (+/–) Alt+Plus/Minus (+/–) keys value keys

Trim right edge of region to right/left by Nudge Command+Plus/Minus (+/–) Ctrl+Plus/Minus (+/–) keys value keys

Reverse Trimmer tool direction when trimming Option+Trimmer tool Alt+Trimmer tool region

Trim up to, but not over, adjacent regions Hold down while Hold down Start key while trimming trimming

Duplicate region(s) in Edit Window Option-click selection and Alt-click selection and drag to drag to destination destination

Delete selection in playlist or Delete (on Backspace or Delete (on QWERTY keyboard) QWERTY keyboard)

Constrain audio region to vertical movement Control-click to move audio Start-click to move audio region with Grabber tool region with Grabber tool

Snap region start to stationary playhead or Control-click new region with Start-click new region with Edit selection start Grabber tool Grabber tool

Snap region sync point to stationary playhead Control-Shift-click region con- Start-Shift-click region con- or Edit selection start taining the sync point with taining the sync point with Grabber tool Grabber tool

Snap region end to stationary playhead or Edit Command-Control-click new Ctrl-Start-click new region selection start region with Grabber tool with Grabber tool

Track Compositing • The following shortcuts apply to track Playlist lanes in the Edit window (if applicable)

Solo the Playlist lane containing the Edit cur- Shift+S Shift+S sor

Move the Edit cursor up and down through Control+P and Control+Semi- Start+P and Start+Semicolon Playlist lanes Colon (;) (;)

Copy the selection to the main Playlist Option+Control+V Alt+Start+V

Create a new playlist for the first selected Control+\ Start+\ track in the session

Create a new playlist for each track in the ses- Control+Option+\ Start+Alt+\ sion

Create a new playlist for each selected track in Control+Option+Shift+\ Start+Alt+Shift+\ the session

Pro Tools Shortcuts 11 Action Mac Windows

Duplicate the main playlist for the first Command+Control+\ Control+Start+\ selected track in the session

Duplicate the main playlist for each track in Command+Option+Control+\ Control+Alt+Start+\ the session

Duplicate the main playlist for Command+Option+ Control+Alt+Start+Shift+\ each selected track in the session Control+Shift+\

Zoom

Horizontal zoom in or out Command+ ] or [ Ctrl+ ] or [

Zoom to show entire session horizontally with- Command+Control+[ Ctrl+Start+[ out affecting vertical zoom or

Zoom in horizontally on a selection without Command+Control+] Ctrl+Start+] affecting vertical zoom or scrolling

Vertical zoom to show default waveform height Command+Option+Control+[ Ctrl+Alt+Start+[ (Audio)

Incrementally zoom vertically on all audio Command+Option+ [ or ] Ctrl+Alt+ [ or ] tracks

Vertical zoom in or out (MIDI) Command+Shift+ ] or [ Ctrl+Shift+ ] or [

Vertical zoom to show all (lowest to high- Command+Control+Shift+[ Ctrl+Start+Shift+[ est) in MIDI and Instrument (MIDI)

Vertical zoom to show all tracks Option+A Alt+A

Horizontal zoom to show all tracks Option+Control+A Alt+Start+A

Horizontal zoom and scroll timeline excluding Option+F Alt+F MIDI events

Horizontal zoom to selection, including MIDI Option+Control+F Alt+Start+F events

Continuously zoom vertically on a single audio Control+drag with the Zoomer Start-drag with the Zoomer track (or group of tracks) tool up or down in the track tool up or down in the track

Continuously zoom vertically on all audio Control+Shift+drag in an Start+Shift-drag in an audio tracks audio track with the Zoomer track with the Zoomer tool tool

Incrementally zoom vertically on all audio Command+Option+[ or Com- Press Ctrl+Alt+[ or Ctrl+Alt+ ] tracks mand+Option+]

Fill window with selection Option-click on Zoomer tool or Alt-click on Zoomer tool or Option+F Alt+F

12 Pro Tools Shortcuts Guide Action Mac Windows

View entire session and reset waveform dis- Double-click on Zoomer tool Double-click on Zoomer tool play to the default height or Option+A or Alt+A

Set all audio track waveform heights to match Command-Shift-click any of Ctrl-Shift-click any of the the waveform height of the top-most audio the Zoom buttons Zoom buttons track in the Edit window

Zoom vertical and horizontal axis Hold down Command key Hold down Ctrl key while drag- while dragging the Zoomer ging Zoomer tool tool

Zoom to previous orientation Option-click on any Horizontal Alt-click on any Horizontal Zoom In or Out button, or Zoom In or Out button, or Audio or MIDI Zoom In or Out Audio or MIDI Zoom In or Out button button

Maximum zoom before waveform drawn from Command-click on Zoomer Ctrl-click on Zoomer tool) disk (faster drawing from RAM) tool

Zoom Toggle Control+E Start+E

Cancel Zoom Toggle and remain at the same Option+Shift+E Alt+Shift+E zoom level

Recall Zoom presets 1–5 Control+Zoom preset number Start+Zoom preset number (1, 2, 3, 4, or 5 on QWERTY (1, 2, 3, 4, or 5 on QWERTY keyboard), keyboard), or Zoom preset number (1, 2, or Zoom preset number (1, 2, 3, 4, or 5 on QWERTY key- 3, 4, or 5 on QWERTY key- board, in Commands Key- board in Commands Keyboard board Focus) Focus)

Save Zoom presets 1-5 Command-click Zoom preset Ctrl-click Zoom preset number number in Mix Window toolbar in Mix Window toolbar

File Menu • The following are shortcuts of commands found in the File Menu

New Session Command+N Ctrl+N

Open Session Command+O Ctrl+O

Open Recent Command+Shift+O Ctrl+Shift+O

Close session Command+Shift+W Ctrl+Shift+W

Save Session Command+S Ctrl+S

Bounce to Disk Command+Option+B Ctrl+Alt+B

Import Session Data Shift+Option+I Shift+Alt+I

Pro Tools Shortcuts 13 Action Mac Windows

Import Audio Command+Shift+I Ctrl+Shift+I

Import MIDI Command+Option+l Ctrl+Alt+l

Print Score from Pro Tools Session Command+P Ctrl+P

Missing File Dialog • The following shortcuts apply to Missing File Dialog

Skip all missing Command+S Ctrl+S

Manually find and relink all missing files Command+M Ctrl+M

Automatically find and relink all missing files Command+A Ctrl+A

Regenerate missing fades Command+R Ctrl+R

Regenerate missing render files Command+D Ctrl+D

Edit Menu • The following are shortcuts of commands found in the File Menu

Undo Command+Z Ctrl+Z

Redo Command+Shift+Z Ctrl+Shift+Z

Cut Command+X Ctrl+X

Copy Command+C Ctrl+C

Paste Command+V Ctrl+V

Clear Command+B Ctrl+B

Select All Command+A Ctrl+A

Paste Special Merge Option+M Alt+M

Paste Special Repeat to Fill Selection Command+Option+V Ctrl+Alt+V

Paste Special to Current Automation Type Command+Control+V Ctrl+Start+V

Change Timeline Selection to Edit Selection Option+Shift+6 (on numeric Alt+Shift+6 keypad)

Change Edit Selection to Match Timeline Option+Shift+5 (on numeric Alt+Shift+5 Selection keypad)

Play Edit Selection Option+[ Alt+[

Play Timeline Selection (in Dynamic Transport Option+] Alt+] Mode or when Link Timeline and Edit Selection is disabled)

14 Pro Tools Shortcuts Guide Action Mac Windows

Duplicate selection Command+D Ctrl+D

Repeat selection Option+R Alt+R

Shift selection Option+H Alt+H

Insert Silence Command+Shift+E Ctrl+Shift+E

Trim Region to Selection Command+T Ctrl+T

Trim Region Start to Insertion Option+Shift+7 Alt+Shift+7

Trim Region End to Insertion Option+Shift+8 Alt+Shift+8

Separate Region at Selection Command+E Ctrl+E

Heal Separation Command+H Ctrl+H

Strip Silence Command+U Ctrl+U

Consolidate selection Option+Shift+3 Alt+Shift+3

TCE Edit to Timeline selection Option+Shift+U Alt+Shift+U (Pro Tools HD systems and Pro Tools LE with DV Toolkit™ 2 only)

Restore Last Selection Command+Option+Z Ctrl+Alt+Z

Memory Location and Markers

Create Memory Location Enter (on numeric keypad) Enter (on numeric keypad)

Edit a Memory Location Control-click on Memory Loca- Start-click on Memory Loca- tion marker tion marker

Delete Memory Location Option-click on a Memory Alt-click on a Memory Loca- Location marker tion marker

Recall a Memory Location using the numeric Period (.)+Memory Location Period (.)+Memory Location keypad number+Period (.) (Transport number+Period (.) (Transport or Shuttle mode), or Shuttle mode), or Memory Location num- or Memory Location num- ber+Period (.) (Classic mode) ber+Period (.) (Classic mode)

Move only the Song Start Marker, without mov- Control-Shift-drag the Song Start-Shift-drag the Song ing any tick-based data Start Marker Start Marker

Toggle the Timeline Insertion/Play Start Control+N Start+N Marker Follows Playback preference on and off

Pro Tools Shortcuts 15 Action Mac Windows Automation

Toggle Track View on all tracks Option+Minus (–) key (on Alt+Minus (–) key (on QWERTY keyboard) QWERTY keyboard)

Change to previous/next Track View on all Control+Com- Ctrl+Start+Left/Right Arrow tracks included in the current selection mand+Left/Right Arrow keys keys

Change to previous/next Track View on all Control+Option+Com- Ctrl+Alt+Start+Left/Right tracks mand+Left/Right Arrow keys Arrow keys

Disable/enable Automation playlist on Command-click on Track View Ctrl-click on Track View selec- selected track selector tor

Disable/enable all Automation playlists on Command+Shift-click on Ctrl+Shift-click on Track View selected track Track View selector selector

Open Plug-in Automation dialog Command+Option+Control- Ctrl+Alt+Start-click on param- click on Track View selector eters (in Plug-in window) (in Edit window)

Access Plug-in Automation commands Command+Option+Control- Ctrl-Alt-Start-click on Track (Pro Tools HD only): Automation dialog, click on parameters (in Plug-in View selector (in Edit window) Enable/disable plug-in automation window)

Copy Automation to Send (Pro Tools HD only) Command+Option+H Ctrl+Alt+H

Thin Automation Command+Option+T Ctrl+Alt+T

Write automation to start of session/selection Control-click on Transport Start-click on Transport (Pro Tools HD only) Return to Zero button Return to Zero button

Write automation to end of session/selection Control-click on Transport Go Start-click on Transport Go to (Pro Tools HD only) to End button End button

Write automation from start to end of ses- Control-Shift-click on Trans- Start-Shift-click on Transport sion/selection (Pro Tools HD only) port Go to End or Return to Go to End or Return to Zero Zero button button

Write Automation to Current Parameter Command+Forward Slash (/) Ctrl+Forward Slash (/) (Pro Tools HD only)

Write Automation to All Enabled Parameters Command+Option+Forward Ctrl+Alt+Forward Slash (/) (Pro Tools HD only) Slash (/)

Trim Automation to Current Parameter Command+Shift+Forward Ctrl+Shift+Forward Slash (/) (Pro Tools HD only) Slash (/)

Trim Automation to All Enabled Parameters Command+Option+Shift+For- Ctrl+Alt+Shift+Forward Slash (Pro Tools HD only) ward Slash (/) (/)

16 Pro Tools Shortcuts Guide Action Mac Windows

Glide Automation to Current Parameter Option+Forward Slash (/) Alt+Forward Slash (/) (Pro Tools HD and Pro Tools LE with DV Toolkit 2 only)

Glide Automation to All Enabled Parameters Option+Shift+ Forward Slash Alt+Shift+ Forward Slash (/) (Pro Tools HD and Pro Tools LE with DV Toolkit (/) 2 only)

Suspend Trim automation on all tracks In the Automation window, In the Automation window, Command-click the Suspend Ctrl-click the Suspend button button

Suspend currently displayed automation type Command-click the control Ctrl-click the control name in on a track name in the Track View selec- the Track View selector tor

Vertically constrain automation movement Press Shift and move automa- Press Shift and move automa- tion with Grabber tool tion with Grabber tool

Write new breakpoint to next automation value Press and hold Option+Shift Press and hold Alt+Shift while while writing a breakpoint (by writing a breakpoint (by click- clicking with the Grabber tool ing with the Grabber tool in a in a track’s Automation play- track’s Automation playlist) list)

Write new breakpoint to previous automation Press and hold Com- Press and hold Ctrl+Alt while value mand+Option while writing a writing a breakpoint (by click- breakpoint (by clicking with ing with the Grabber tool in a the Grabber tool in a track’s track’s Automation playlist) Automation playlist)

AutoMatch all controls on a track (Pro Tools Command-click the Automa- Ctrl-click the Automation HD only) tion Mode selector on the Mode selector on the track track

AutoMatch all controls of one automation type In the Automation window, In the Automation window, (Pro Tools HD only) Command-click the button for Ctrl-click the button for the the automation type automation type

AutoMatch all controls of one automation type Hold Command and press the Hold Ctrl and press the Chan- on a channel (Pro Tools HD with work Channel Strip Mode controls nel Strip Mode controls for surface only) for the track whose controls the track whose controls you you want to AutoMatch want to AutoMatch

AutoMatch a Pan control or the controls for an Hold Command and press the Hold Ctrl and press the Rotary individual Insert or Send (Pro Tools HD with Rotary Encoder Select switch Encoder Select switch for the ICON work surface only) for the control you want to control you want to AutoMatch AutoMatch

Pro Tools Shortcuts 17 Action Mac Windows

AutoMatch the controls for a plug-in displayed Hold Command and press the Hold Ctrl and press the Auto in the Dynamics or EQ section (Pro Tools HD Auto switch in the Dyn or EQ switch in the Dyn or EQ sec- with ICON work surface only) section of the console tion of the console

Suspend (Pro Tools HD only) In the Automation window, In the Automation window, Command-click the Preview Ctrl-click the Preview button button

Special Paste of automation data between dif- Command+Control+V Start+Ctrl+V ferent controls

Configure Write on Stop modes to remain Option-click one of the Write Alt-click one of the Write On enabled after an automation pass (Pro Tools On Stop modes (Start, End, or Stop modes (Start, End, or HD only) All) to enable the Write On All) to enable the Write On Stop mode Stop mode

Display Automation playlist of automation- Command-Control-click on enabled plug-in control, track volume, or track control pan

Delete* Backspace Backspace

Cut* Command+X Ctrl+X

Copy* Command+C Ctrl+C

Duplicate* Command+D Ctrl+D

Clear* Command+B Ctrl+B

Insert Silence Command+Shift+E Ctrl+Shift+E

*Hold Down Start during the shortcut to affect all Automation playlists on the track Fades

Create Fades (open Fades dialog) Command+F Ctrl+F

Apply crossfade without opening Fades dialog Command+Control+F (uses Ctrl+Start+F (uses last last selected shape) selected fade shape)

Fade to Start Option+D Alt+D

Fade to End Option+G Alt+G

18 Pro Tools Shortcuts Guide Action Mac Windows Fades Dialog • The following shortcuts apply to the Fades dialog

Edit crossfade-in only in Fades dialog Option-drag fade-in curve Alt-drag fade-in curve (“None” (“None” Link mode only) mode only)

Edit crossfade-out only in Fades dialog Command-drag fade-out Ctrl-drag fade-out curve curve (“None” Link mode (“None” Link mode only) only)

Audition start/stop in Fades dialog Spacebar Spacebar

Reset to default zoom in Fades dialog Command-click on Zoom In or Ctrl-click on Zoom In or Zoom Zoom Out buttons Out buttons

Reset standard or S-shape crossfades to Option-click fade curve in Alt-click fade curve in cross- default curves crossfade fade window fade fade window (“Equal (“Equal Power” and “Equal Power” and “Equal Gain” Link Gain” Link modes only) modes only)

Cycle up/down through Out Shape parameter Control+Up/Down Arrow keys Start+Up/Down Arrow keys options

Cycle up/down through In Shape parameter Option+Up/Down Arrow keys Alt+Up/Down Arrow keys options

Cycle up/down through Link parameter Up/Down Arrow keys Up/Down Arrow keys options

Cycle up/down through preset Out Shape Control+Left/Right Arrow Start+Left/Right Arrow keys curves keys

Cycle up/down through preset In Shape Option+Left/Right Arrow keys Alt+Left/Right Arrow keys curves

View Menu • The following are shortcuts of commands found in the View Menu

View Narrow Mix window option Command+Option+M Ctrl+Alt+M

View Real-Time Properties window Option+4 (on the numeric key- Alt+4 (on the numeric keypad) pad)

Track Menu • The following are shortcuts of commands found in the Track Menu

New Track Command+Shift+N Ctrl+Shift+N

Group Tracks Command+G (with two or Ctrl+G (with two or more more tracks selected) tracks selected)

Duplicate Tracks Option+Shift+D Alt+Shift+D

Pro Tools Shortcuts 19 Action Mac Windows

Auto Input Monitoring/Input Only Monitoring Option+K Alt+K (Pro Tools LE only)

Set Record Tracks to Input Only/Set Record Option+K Alt+K Tracks to Auto Input (Pro Tools HD)

Scroll to Track number Command+Option+F Ctrl+Alt+F

Clear all Clip indicators Option+C Alt+C

New Tracks Dialog • The following shortcuts apply to items in the New Tracks dialog

Cycle through Track Type choices Command+Up/Down Arrow Ctrl+Up/Down Arrow keys keys

Cycle through Track Format choices Command+Left/Right Arrow Ctrl+Left/Right Arrow keys keys

Cycle through Track Timebase choices Command+Option+Up/Down Ctrl+Alt+Up/Down Arrow keys Arrow keys

Add or delete a Track Entry field Command+Plus/Minus (+/–) Ctrl+Plus/Minus (+/–) keys, keys or Com- or Ctrl+Shift+Up/Down Arrow mand+Shift+Up/Down Arrow keys keys

Re-arrange Track Entry field (move up/down) Drag the Move Row icon (at Drag the Move Row icon (at the right of each Track Entry the right of each Track Entry row) to desired position row) to desired position

Region Menu • The following are shortcuts of commands found in the Region Menu

Mute/Unmute Regions Command+M Ctrl+M

Lock/Unlock Regions Command+L Ctrl+L

Time Lock/Unlock the selected region Option+Control+L Alt+Start+L

Bring to Front Option+Shift+F Alt+Shift+F

Send to Back Option+Shift+B Alt+Shift+B

Group Regions Command+Option+G Ctrl+Alt+G

Ungroup Regions Command+Option+U Ctrl+Alt+U

Regroup regions Command+Option+R Ctrl+Alt+R

Loop Region Command+Option+L Ctrl+Alt+L

Capture Region Command+R Ctrl+R

20 Pro Tools Shortcuts Guide Action Mac Windows

Identify Sync Point Command+Comma (,) Ctrl+Comma (,)

Quantize Region to Nearest Grid Command+0 (zero) Ctrl+0

Open Elastic Properties windows Option+5 (on numeric key- Alt+5 (on numeric keypad) pad)

Region List • The following shortcuts apply to items in the Region List

Select region by name Click the Region List a–z but- Click the Region List a–z but- ton, then type the first letters ton, then type the first letters of the desired region of the desired region

Find region Command+Shift+F Ctrl+Shift+F

Clear Find Command+Shift+D Ctrl+Shift+D

Show/Hide Audio regions Command+Shift+1 (on Ctrl+Shift+1 (on numeric key- numeric keypad) pad)

Show/Hide MIDI regions Command+Shift+2 (on Ctrl+Shift+2 (on numeric key- numeric keypad) pad)

Show/Hide Groups Command+Shift+3 (on Ctrl+Shift+3 (on numeric key- numeric keypad) pad)

Show/Hide Auto-Created region Command+Option+K Ctrl+Alt+k

Select All regions in Region List Command+Shift+A Ctrl+Shift+A

Select Unused regions Command+Shift+U Ctrl+Shift+U

Clear selected regions Command+Shift+B Ctrl+Shift+B

Rename selected regions Command+Shift+R Ctrl+Shift+R

Time Stamp selected regions Command+Shift+M Ctrl+Shift+M

Export Region Definition Command+Shift+Y Ctrl+Shift+Y

Export Regions as Files Command+Shift+K Ctrl+Shift+K

Select or deselect a region Command-click a region Ctrl-click a region

Select multiple contiguous regions Click one region, then Shift- Click one region, then Shift- click another region to select click another region to select all regions between or deselect all regions between

Pro Tools Shortcuts 21 Action Mac Windows

Select or deselect multiple discontiguous Place the cursor to the left of Place the cursor to the left of regions with the Marquee the names in the Region List. the names in the Region List. When the Marquee (“+”) When the Marquee (“+”) appears, hold Command and appears, hold Ctrl and drag to drag to select or deselect the select or deselect the desired desired regions regions.

Bypass dialogs during deletion of audio files Option-click Delete or Yes Alt-click Delete or Yes when when prompted prompted

Audition region in Region List Option-click and hold on Alt-click and hold on region in region in Region List Region List

Rename region/file Double-click region in Region Double-click region in Region List, or double-click with - List, or double-click with the ber tool on region in playlist Grabber tool on region in play- list

Constrain region placement to start at Control and drag region Start-click and drag region play/edit cursor location or selection start

Constrain region placement to end at Command+Control and drag Start-Ctrl-click and drag play/edit cursor location or selection start region region

Track List • The following shortcuts apply to items in the Track List

Show/Hide all tracks Option-click on any Eye in Alt-click on any Eye in Track Track List List

Select all tracks Option-click on any Track Alt-click on any Track Name in Name in Track List Track List

Mix Group List and Edit Group List • The following shortcuts apply to items in the Mix Group List and Edit Group List

Suspend All Groups Command+Shift+G, or Com- Ctrl+Shift+G, or Ctrl-click on mand-click on Groups pop-up Groups pop-up menu menu

Rename group Double-click to far left of Double-click to far left of Group name in Group List Group name in Group List

Group enable/disable Click the Group List Keyboard Click Group List Keyboard Focus, then type the letter Focus, then type the letter corresponding to desired corresponding to desired group group

Select all tracks in a group Click to the left of a Group Click to the left of a Group name in Group List name in Group List

22 Pro Tools Shortcuts Guide Action Mac Windows

Temporarily isolate channel strip from Groups Control-click (or Right-click) applicable Group parameter

Show group members only Control-click on Group(s) in Group List

Create Group and Modify Group Dialogs • The following shortcuts apply to the Create Group and Modify Group dialogs

Add selected track to a group in Tracks View Press A Press A

Remove selected track from a group in Tracks Press R Press R View

Select or deselect all attributes in Attributes Option-Shift-click any attri- Alt-Shift-click any attribute View butes

Select or deselect all attributes for a single Control-click any attribute in a Start-click any attribute in a Send or Insert (across a row) in Attributes row row View

Select or deselect attributes for a single con- Option-click any attribute in a Alt-click any attribute in a col- trol across all Sends, all Inserts, or for the four column umn track controls (down a column) in Attributes View

Elastic Audio • The following shortcuts apply to Elastic Audio-enabled regions or tracks

Toggle between Real-Time and Rendered Elas- Command-Control-click the Ctrl-Start-click the Elastic tic Audio processing Elastic Audio plug-in button Audio plug-in button

Add a Warp marker on top of an event With the Grabber tool, Con- With the Grabber tool, Start- trol-click any Event marker click any Event marker

Relocate a Warp marker (without applying With the Grabber or the Pencil With the Grabber or the Pencil warping) tool, Control-click and drag a tool, Start-click and drag a Warp marker to a new loca- Warp marker to a new loca- tion tion

Delete a Warp marker Double-click a Warp marker, Double-click a Warp marker, or with the Grabber or the or with the Grabber or the Pencil tool, Option-click a Pencil tool, Alt-click a Warp Warp marker marker

Delete all Warp markers in a selection Press Delete or Backspace Press Delete or Backspace

Telescope-Warp audio before first Warp With the Grabber tool, Option- With the Grabber tool, Alt- marker in or out click and drag first Event click and drag first Event marker to the left or right marker to the left or right

Pro Tools Shortcuts 23 Action Mac Windows

Add an Event marker With the Grabber tool, Con- With the Grabber tool, Start- trol-click at the location where click at the location where you you want to add an Event want to add an Event marker marker

Delete an Event marker With the Graber Tool or Pencil With the Graber Tool or Pencil tool, Option-click the Event tool, Alt-click the Event marker you want to delete marker you want to delete

Event Menu • The following are shortcuts that apply commands found in the Event Menu

Open Time Operations window Option+1 (on numeric key- Alt+1 (on numeric keypad) pad)

Open Tempo Operations window Option+2 (on numeric key- Alt+2 (on numeric keypad) pad)

Open Event Operations window Option+3 (on numeric key- Alt+3 (on numeric keypad) pad)

Quantize (in Event Operations window) Option+0 (on numeric key- Alt+0 (on numeric keypad) pad)

Change Duration (in Event Operations window) Option+P Alt+P

Transpose (in Event Operations window) Option+T Alt+T

Select/Split Notes (in Event Operations win- Option+Y Alt+Y dow)

Open MIDI Event List window Option+Equal (=) Alt+Equal (=)

Open Beat Detective window Command+8 (on numeric key- Ctrl+8 (on numeric keypad) pad)

Identify Beat Command+I Ctrl+I

All MIDI Notes Off Command+Shift+Period (.) Ctrl+Shift+Period (.)

MIDI Events List • The following shortcuts are active only when the MIDI Event List window is open.

Enter start time field for editing Command+Enter (on numeric Ctrl+Enter (on numeric key- keypad) pad)

Show Event Filter dialog Command+F Ctrl+F

Go to Command+G Ctrl+G

Scroll to Edit selection Command+H Ctrl+H

Insert another event Command+M Ctrl+M

24 Pro Tools Shortcuts Guide Action Mac Windows

Insert note Command+N Ctrl+N

Insert Program Change Command+P Ctrl-P

Insert Controller Command+L Ctrl+L

Insert Poly Pressure Command+O (letter) Ctrl+O (letter)

Delete event in MIDI Events List Option-click Alt-click

Step Input Dialog • The following shortcuts are available in the Event Operations Step Input window, when the Enable Numeric Key- pad Shortcuts option is checked.

Whole note 1 1

1/2 note 2 2

1/4 note 4 4

1/8 note 5 5

1/16 note 6 6

1/32 note 7 7

1/64 note 8 8

Dotted note Decimal key (.) Decimal key (.)

Toggle Tuplet on/off 3 3

Next step Enter Enter

Undo step 0 0

Nudge forward Plus (+) Plus (+)

Nudge back Minus (–) Minus (–)

Select Main Location indicator Equals (=) Equals (=)

Edit Selection indicators / /

Pro Tools Shortcuts 25 Action Mac Windows Options Menu • The following are shortcuts of commands found in the Options Menu

Transport Online Command+J Ctrl+J

Video Track Online Command+Shift+J Ctrl+Shift+J

Auto-Spot Regions Command+P Ctrl+P

Additional Options menu commands in Playback and Recording (see “Playback” on page 3 and“Record” on page 4). Setup Menu • The following are shortcuts of commands found in the Setup Menu

Session Setup window Command+2 (on the numeric Ctrl+2 (on the numeric key- keypad) pad)

Peripherals Dialog • The following shortcuts apply to the Peripherals dialog, available in the Setup menu

Go to Synchronization window Command+1 Ctrl+1

Go to Machine Control window Command+2 Ctrl+2

Go to MIDI Controllers window Command+3 Ctrl+3

Go to Ethernet Controllers window Command+4 Ctrl+4

Go to Mic Preamps window (Pro Tools HD only) Command+5 Ctrl+5

Preferences Dialog • The following shortcuts apply to the Preferences dialog, available in the Setup menu

Go to Display window Command+1 Ctrl+1

Go to Operation window Command+2 Ctrl+2

Go to Editing window Command+3 Ctrl+3

Go to Automation window Command+4 Ctrl+4

Go to Processing window Command+5 Ctrl+5

Go to MIDI window Command+6 Ctrl+6

Go to Machine Control window Command+7 Ctrl+7

26 Pro Tools Shortcuts Guide Action Mac Windows Window Menu • The following are shortcuts of commands found in the Window menu

Toggle Mix and Edit windows Command+Equal (=) Ctrl+Equal (=)

Hide All Floating Windows Command+Option+Con- Ctrl+Alt+Start+W trol+W

Show Window Configuration List Command+Option+J Ctrl+Alt+J

Show Task Manager Option+Apostrophe (‘) Alt+Apostrophe (‘)

Show Workspace Option+Semi-Colon (;) Alt+Semi-Colon (;)

Show Project Option+O Alt+O

Bring to Front Option+J Alt+J

Send to Back Option+Shift+J Alt+Shift+J

Show Transport Command+1 (on numeric key- Ctrl+1 (on numeric keypad) pad)

Show Big Counter Command+3 (on numeric key- Ctrl+3 (on numeric keypad) pad)

Show Automation Enable Command+4 (on numeric key- Ctrl+4 (on numeric keypad) pad)

Show Memory Locations Command+5 (on numeric key- Ctrl+5 (on numeric keypad) pad)

Machine Track Arming Command+6 (on numeric key- Ctrl+6 (on numeric keypad) pad)

Show Video Universe window (Pro Tools HD Command+7 (on numeric key- Ctrl+7 (on numeric keypad) and Pro Tools LE with DV Toolkit 2 only) pad)

Show Video Command+9 (on numeric key- Ctrl+9 (on numeric keypad) pad)

Open MIDI Editor Control+Equal (=) Start+Equal (=)

Cycle through all open MIDI Editors Control+Equal (=)repeatedly Ctrl+Equal (=) repeatedly

Open Score Editor Option+Control+Equal (=) Alt+Start+Equal (=)

Access Video window commands (Pro Tools Control-click (or Right-click) in Right-click in the Video win- HD and Pro Tools LE with DV Toolkit 2 only) the Video window dow

Access Video Universe window commands Control-click (or Right-click) in Right-click in the Video Uni- (Pro Tools HD and DV Toolkit 2 only) the Video Universe window verse window

Pro Tools Shortcuts 27 Action Mac Windows Window Configuration • The following shortcuts apply to Window Configurations, found in Windows>Configurations

Add new Window Configuration or replace Period (.)+number (1–99) Period (.)+number existing one in Window Configuration List +Plus (+) (1–99)+Plus (+)(numeric key- (numeric keypad only) pad only)

Recall a Window Configuration Period (.)+Window Configura- Period (.)+Window Configura- tion number (1–99)+ tion number (1–99)+Asterisk (*) (*) (numeric keypad only) (numeric keypad only)

Import Audio Dialog • The following shortcuts apply to the Import Audio dialog

Start/stop audition of currently selected audio Command+P, or Com- Spacebar file/region mand+Spacebar

Add currently selected audio region or file to Command+A Alt+S (if audio file has the list (if audio file has the same same sample rate and bit sample rate and bit depth as depth as the current session) the current session)

Convert and import selected audio Command+C Alt+O (letter) region/files

Remove currently selected audio files/regions Command+R n/a from Regions to Import field

Remove all audio files/regions from Regions Command+Option+R n/a in Current File field

Random-access fwd/rew search selected file Drag slider to, or click at, new Drag slider to, or click at, new location location

Audition selected file Command+P Alt+P

Move between file windows Tab Tab

Cancel Escape Escape

Done Command+W Alt+E

28 Pro Tools Shortcuts Guide DigiBase Shortcuts

The following shortcuts are available in the DigiBase windows, as noted.

Action Mac Windows Global DigiBase Shortcuts

Open the Workspace browser Option+Semi-Colon Alt+Semi-colon

Open the Task Manager window Option+Apostrophe (‘) Alt+Apostrophe (‘)

Open or closes the Project browser Option+O Alt+O

Bring all browsers to the foreground Option+J Alt+J

Send all browsers to the back Option+Shift+J Alt+Shift+J

Cycle to previous/next browsers Command+Left/Right Arrow Ctrl+Left/Right Arrow keys keys

View presets in DigiBase browsers Control+1, 2, 3, 4, or 5 Start+1, 2, 3, 4, or 5

Auditioning

Browser Item: Start or stop auditioning from Spacebar Spacebar head (when Spacebar Toggle File Preview is enabled) – or – Audio Import dialog: Start or stop auditioning from head

Browser Item: Start or stop loop auditioning Option+Spacebar Alt+Spacebar from head

Start or stop preview when browser is front- Command+P Ctrl+P most window

Stop preview when browser is front-most win- Escape Escape dow

Start and stop Context Preview in the front- Press Esc or Command+P Press Esc or Ctrl+P most browser during session playback

Enable/disable Loop Preview mode Control-click the Preview but- Start-click the Preview button ton

Enable/disable Auto-Preview mode Command-click the Preview Ctrl-click the Preview button button

Import Audio dialog: Start or stop auditioning Command+P Alt+P

Pro Tools Shortcuts 29 Action Mac Windows Delete or Duplicate

Region List: Delete selected Region from the Delete Delete timeline – or – Browser Item: Delete items from the browser/disk

Delete locked files selected in a browser Command+Delete Ctrl+Delete

Delete any selected browser item, and sup- Option+Delete Alt+Delete presses any warning dialog

Create duplicates of any selected files Command+D Ctrl+D

Mouse Click

Select contiguous items in a browser or col- Shift-click Shift-click umn headers

Select all of the files in a multichannel file in a Option+Shift-click Alt+Shift-click browser

Column Headers: a secondary sort Option-click Alt-click order – or – Region List: Audition a file – or – Browser Find Button: Cancel a search, and closes the Search pane – or – Browser Box: Close all open browsers

Column Header: Access list of columns that Control-click in any DigiBase Start-click (or Right-click) in can be shown or hid column any DigiBase column label

30 Pro Tools Shortcuts Guide Action Mac Windows

Browser Back Button: Open the navigation Command-click Ctrl-click menu – or – Browser Items: Select discontiguous items – or – Column Headers: Select discontinuous col- umn headers – or – Browser Up Button: Open menu for navigating up several levels – or – Browser View Preset Buttons: Store column order and width, and sort order

Region List: Select a region without changing Control-click Ctrl-double-click which region is highlighted in Timeline

Browser Items: Open a new window and leave Command-double-click the original window open

Drag and Drop

Browser Item: From one folder to another Option-drag and drop Alt-drag and drop folder on the same volume, create a copy of that item in the target location – or – Browser Media File to Region List or Timeline: Create a copy of the media file in the session’s Audio Files folder

Browser File: Import to Timeline and create a Shift-drag and drop Shift-drag and drop new track

Waveform Display: Set sync point and spots to Command-drag and drop Ctrl-drag and drop Timeline – or – Region List: Open the Replace Region dialog (Pro Tools HD and Pro Tools LE with DV Toolkit 2 only)

Waveform Display: Set the sync point and spot Command+Option-drag and Ctrl-Alt-drag and drop to the Timeline and copy the audio file drop

Pro Tools Shortcuts 31 Action Mac Windows

Region List: Snap to head Control-drag and drop Start-drag and drop – or – Browser Audio File, from Name or Icon: Snap to head – or – Browser Audio File, from Waveform Display: Spot to temporary sync point

Browser Audio File to Timeline: Snap to head Control+Option-drag and drop Start-Alt-drag and drop and copy the audio file to the session’s Audio Files folder

Region List: Snap to sync point Control+Shift-drag and drop Start-Shift-drag and drop – or – Browser Item: Snap to sync point

Browser Item: Snap to sync point and copy the Control+Option-Shift-drag and Start-Alt-Shift-drag and drop audio file to the session’s Audio Files folder drop

Region List: Snap to tail Control+Command-drag and Start+Ctrl-drag and drop drop – or – Browser Item: Snap to tail

Browser Item: Snap to tail and copy the audio Control+Command+Option- Start+Ctrl+Alt drag and drop file to the session’s Audio Files folder drag and drop

Browser Item: Spot with variable cursor Control-Command-Shift drag Start+Ctrl+-Shift drag and and drop drop

Browser Item: Spot with variable cursor and Control+Com- Start+Ctrl-Alt+Shift-drag and copy the audio file to the session’s Audio Files mand+Option+Shift-drag and drop folder drop

Navigation

Selection up Up Arrow key Up Arrow key

Selection down Down Arrow key Down Arrow key

Scroll Page up Page Up Page Up

Scroll Page down Page Down Page Down

Scroll to top of browser Home Home

Scroll to bottom of browser End End

Scroll to track Command+Option+F Ctrl+Alt+F

Up one browser level (same as Up arrow icon) Command+Up Arrow key Ctrl+Up Arrow key

32 Pro Tools Shortcuts Guide Action Mac Windows

Open folder (new window) Command+Down Arrow key Ctrl+Down Arrow key

Open Show/Hide icon Right Arrow key Right Arrow key

Close Show/Hide icon Left Arrow key Left Arrow key

Cycle to next or previous browser Command+Left/Right Arrow Ctrl+Left/Right Arrow keys keys

Enter/exit Name Edit field Enter or Return Enter

Revert to original text Escape (Esc) key Escape (Esc) key

Open/close Search pane Command+F Ctrl+F

Move to next Search field Tab Tab

Move to previous Search field Shift+Tab Shift+Tab

Deck Control Key Commands (Pro Tools HD with MachineControl™ Only)

Action Mac Windows

Rewind Shift+< Shift+<

Fast Forward Shift+> Shift+>

Shuttle Backward Option+comma Start+comma

Shuttle Forward Option+period Start+period

Toggle Transport Master Command+\ Control+\

All Transport Buttons Off/Unthread Tape Command+period Control+period

Search Mode Toggle (Play-Pause/Stop) Spacebar/Command+period Spacebar/Ctrl+period

When Transport = Machine

Cue to Selection Start Command+Left Arrow Control+Left Arrow

Cue to Selection End Command+Right Arrow Control+Right Arrow

Cue to Selection Start Minus Preroll Option+Left Arrow Alt+Left Arrow

Pro Tools Shortcuts 33 Right-Click Shortcuts

The following right-click shortcuts apply to both Mac and Windows systems equipped with a two- button mouse. Right-clicking the noted feature allows you to perform commands and access menus (if applicable).

Feature Shortcut Mix Window

Channel Volume fader Temporarily isolate control from group operation Channel Pan slider Channel Mute button Channel Solo button Channel Record Enable but- ton Channel TrackInput button Send fader Send Pan slider

Channel Input selector • Make Active/Inactive Channel Output selector • Rename

Send selector Access send assignment views

Send Assignment button •Mute • Make Active/Inactive • Rename

Insert Assignment button • Bypass • Make Active/Inactive • Automation dialog (plug-ins only) • Automation Safe (plug-ins only) • Rename (hardware I/O only)

34 Pro Tools Shortcuts Guide Feature Shortcut

Track name • Hide/Show (in Mix window, Edit window • Hide and Make Inactive/Show and Make Active and Track List) • Make Inactive/Make Active • Scroll Into View • Locked (video track only) •New • Rename • Duplicate • Split Into Mono (multichannel tracks only) •Delete • Expand Channels to New Tracks •By Channel Name •By Channel Number •By Channel Name and Number •By Timecode • Track Compositing Commands: Filtering Lanes •Show All Lanes •Show Only Lanes With > Regions Within The Edit Selection •Show Only Lanes With > Regions Outside The Edit Selection •Show Only Lanes With > Regions Rated >=1–5 •Hide All Lanes •Hide Only Lanes With > Regions Within The Edit Selection •Hide Only Lanes With > Regions Outside The Edit Selection •Hide Only Lanes With > Regions Rated >=1–5 •Rating

Surround Panning Mode but- Access Panning modes: ton • X/Y Mode (in Surround Output Window) • 3-Knob mode (Pro Tools HD only) • Divergence Editing mode • AutoGlide mode

Group List items Access Group List commands and information: • Group ID • Tracks (list of tracks in Group) • Attributes (list of Group Attributes) (Pro Tools HD only) • Modify • Duplicate • Delete • Select Tracks in Group • Show/Hide Tracks in Group • Show/Hide Only Tracks in Group • Show/Hide All Tracks

Pro Tools Shortcuts 35 Feature Shortcut Edit Window

Region, region selection, or • Tools point in region •Zoomer (Blocks and Waveform Track •Trimmer views) •Selector •Grabber •Scrubber •Pencil • Insert •Key Signature •Meter •Chord •Cut •Copy •Paste • Clear • Matches (region or region selection only) •Match Criteria •Expand Alternates to New Playlists •Expand Alternates to New Tracks • Elastic Properties (Elastic Audio track only) • Conform to Tempo (Elastic Audio track only) • Remove Warp (Elastic Audio track only) • Remove (Elastic Audio track only) • Separate • Delete Fades • Snap to Next • Snap to Previous • Spot • Rename (region or region selection only) • Group Regions (region or region selection only) • Ungroup Regions (region or region selection only) • Loop • Unloop •Rating •1–5

36 Pro Tools Shortcuts Guide Feature Shortcut

Command+right-click (Mac), • Tools Control+right-click (Windows) •Zoomer region, region selection, or •Trimmer point in region •Selector (Blocks and Waveform Track •Grabber views) •Scrubber •Pencil • Insert •Key Signature •Meter •Chord •Cut •Copy • Clear • Matches (Channels or Alternates) • Elastic Properties (Elastic Audio track only) • Conform to Tempo (Elastic Audio track only) • Remove Warp (Elastic Audio track only) • Snap to Next • Snap to Previous • Spot • Rename • Move Region Start to Selection Start • Move Region Sync to Selection Start • Move Region End to Selection Start • Loop • Unloop Region, region selection, or • Tools point in region •Zoomer (Analysis Track view, Elastic •Trimmer Audio track only) •Selector •Grabber •Scrubber •Pencil • Insert •Key Signature •Meter •Chord • Add Event Marker • Remove Event Marker • Elastic Properties • Conform to Tempo • Remove Warp • Conform to Tempo • Remove Warp Marker • Remove Pitch Shift

Pro Tools Shortcuts 37 Feature Shortcut

Region, region selection, or • Tools point in region (Warp Track •Zoomer view) •Trimmer •Selector •Grabber •Scrubber •Pencil • Insert •Key Signature •Meter •Chord • Add Warp Marker • Remove Warp Marker • Elastic Properties • Conform to Tempo • Remove Warp • Separate • Delete Fades • Rename (region only) • Group (region or region selection only) • Ungroup (region or region selection only) • Loop • Unloop •Rating •1–5

38 Pro Tools Shortcuts Guide Feature Shortcut

Region, region selection, or • Tools point in region (Playlist view •Zoomer only) •Trimmer •Selector •Grabber •Scrubber •Pencil • Insert •Key Signature •Meter •Chord •Cut •Copy •Paste • Clear • Copy Selection to New Playlist • Copy Selection to Main Playlist • Copy Selection to Duplicate Playlist • Matches (region or region selection only) •Match Criteria •Expand Alternates to New Playlists •Expand Alternates to New Tracks • Separate • Delete Fades • Snap to Next • Snap to Previous • Spot • Rename (region or region selection only) • Loop • Unloop •Rating •1–5

Pro Tools Shortcuts 39 Feature Shortcut

Region, region selection, • Tools point in region (Aux Input, •Zoomer MIDI, and Instrument track •Trimmer only) •Selector •Grabber •Scrubber •Pencil • Insert •Key Signature •Meter •Chord •Cut •Copy •Paste •Merge • Clear • Separate • Consolidate • Mute Notes • MIDI Real–Time Properties • Event Operations •Quantize •Change Velocity •Change Duration •Transpose •Select/Split Notes •Input Quantization •Step Input •Restore Performance •Flatten Performance • Open in MIDI Editor • Open in Score Editor

Control-Right-click region, • Add Warp Marker region selection, or point in • Remove Warp Marker region (Warp Track view) • Elastic Properties • Conform to Tempo • Remove Warp • Rename • Loop • Unloop

40 Pro Tools Shortcuts Guide Feature Shortcut

Region List items • Clear • Rename • Time Stamp • Replace Region (Pro Tools HD and Pro Tools LE with DV Toolkit 2 only) • Compact • Export Region Definition • Export Regions as Files • Recalculate Waveform Overviews • Select Parent in Workspace • Object Select in Edit Window

Toolbar Show/Hide controls in Edit Window toolbar

Transport Window

Transport Play button Access Playback modes • Half Speed • Prime for Playback •Loop • Dynamic Transport

Transport Record button Access Record modes •Normal •Loop • Destructive • QuickPunch • TrackPunch (Pro Tools HD only) • DestructivePunch (Pro Tools HD only)

Transport Return to Zero but- Access Automation commands (Pro Tools HD only) ton • Write to Start • Write to All

Transport Go To End button Access Automation commands (Pro Tools HD only) • Write to End • Write to All

Universe Window

Universe window Access Universe window commands

Pro Tools Shortcuts 41 Feature Shortcut MIDI Editor Window

Midi Editor window Notes • Tools Pane •Zoomer •Trimmer •Selector •Grabber •Scrubber •Pencil •Smart • Insert •Key Signature •Meter •Chord •Cut •Copy •Paste • Clear • Separate • Consolidate •Mute • MIDI Real-Time Properties • Event Operations •Quantize •Change Velocity •Change Duration •Transpose •Select/Split Notes •Input Quantization •Step Input •Restore Performance •Flatten Performance • Open in New MIDI Editor • Open in Score Editor • Open in MIDI Event List • Display Notation

42 Pro Tools Shortcuts Guide Feature Shortcut

MIDI Editor window Track List Access Track List commands: • Hide/Show • Hide and Make Inactive/Show and Make Active • Export MIDI •New • Rename • Duplicate • Split Into Mono (multichannel tracks only) • Delete • MIDI Real-Time Properties • Open in New MIDI Editor • Open in Score Editor • Open in MIDI Event List • Notation Display Track Settings

MIDI Editor window toolbar Show/Hide controls in MIDI Editor Window toolbar

Score Editor Window

Score Editor window Notes • Tools Pane •Zoomer •Trimmer •Selector •Grabber •Pencil • Insert •Key Signature •Meter •Chord Symbol •Cut •Copy •Paste •Merge • Clear • Event Operations •Quantize •Change Velocity •Change Duration •Transpose •Select/Split Notes •Input Quantization •Step Input •Restore Performance •Flatten Performance • Open in MIDI Editor • Open in MIDI Event List • Notation Display Track Settings • Score Setup • Send to Sibelius • Print Score

Pro Tools Shortcuts 43 Feature Shortcut

Score Editor window Track Show All Tracks List Show Only Selected Tracks Hide All Tracks Hide Selected Tracks Notation Display Track Settings Score Setup

Score Editor window toolbar Show/Hide controls in Score Editor Window toolbar

Video Window

Video window Access Video window commands • Online • Video Out Firewire •Half Size • Actual Size • Double Size • Fit Screen

DigiBase

Any column header in a Access list of DigiBase columns to show or hide Browser menu

File in Name column of Access DigiBase Browser menu commands: Browser menu • Calculate Waveform • Update Database for Selected • Calculate Elastic Analysis • Clear Elastic Analysis • Invent Selection • Reveal in Explorer • Reveal in Browser • Duplicate Selected •Lock Selected • Unlock Selected • Delete Selected • Unmount • Loop Preview • Auto-Preview • Spacebar Toggles File Preview • Audio Files Conform to Session Tempo

Preview button Access DigiBase Preview commands: • Loop Preview • Auto-Preview • Spacebar Toggles File Preview

Volume field Display Volume fader

44 Pro Tools Shortcuts Guide Avid Technical Support (USA) Product Information 2001 Junipero Serra Boulevard Visit the Online Support Center at For company and product information, Daly City, CA 94014-3886 USA www.avid.com/support visit us on the web at www.avid.com