Remux 4 IP+ASI/IP Real Time, Hardware Based, 1 RU

™ reMux 4 IP+ASI/IP Real Time, Hardware Based, 1 RU,

Front Local or Remotely Manageable, SD and HD, 4:2:0, H.264 and MPEG-2 Transport Stream Re-Multiplexer with IP, DVB-S/S2, and/or ASI Input and IP Rear Output. Designed to Add Additional IP or ASI or RF Services to Existing IP or ASI SPTS or MPTS Inputs. Set Up via LCD Front Panel or via Browser. Overview

Output is IP or ASI. Regenerates PSI + IRD’s are devices used by professionals to receive or demodulate SI Meta Data and Retimes all Inputs. RF feeds and to then decode the resultant MPEG encoded stream. The reMux™ 4 IP+ASI/IP is an advanced MPEG-2 and H.264 Features standard definition integrated receiver decoder for both high  Inputs: definition and standard definition video. It receives signals from  IP (100/1000 M) many different sources, including IP, ASI, DVB-S, and DVB-S2.  DVB-ASI with loopthrough Output is IP and/or ASI. The reMux also has two common interface  DVB-S or DVB-S2 with loopthrough slots which can decode multiple scrambled channels.  Outputs: Audio support includes embedded AAC or MPEG-1 Layer II on  IP (UDP, RTP – 100/1000 M) SDI ports, Dolby Digital® AC-3 passthrough, or analog audio  Two mirrored DVB-ASI outputs output (L, R) on XLR’s.  Optional Audio Outputs: Embedded AAC, MPEG-1 Layer II, YPbPr, Composite, Balanced XLR, Dolby The reMux also converts transport streams to IP, or decodes IP Digital® AC-3 Passthrough streams to a wide variety of different outputs, which makes it ideal for IPTV systems and IP-based head-ends.  Optional DS3 in/out interface is compatible with Barco and Huawei protocols The system can be operated with front panel controls or web-based management software. With multiple inputs and outputs, the  Built-in re-multiplexer reMux can be used in many different settings – including traditional  Closed Caption support head-end networks and downlinks.  Unicast and Multicast support Sample GUI  Compatible with: Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viaccess, and more  Supports PAL, NTSC, and SECAM  LCD front panel controls plus web-based management  Maximum IP output bit rate is 70 Mbps  Maximum 32 separate Unicast or Multicast IP out streams Applications Input and Output Status  IP or ASI re-multiplexing  Off air satellite receiver  MPEG-2/4/H.264 HD Decoder  Transport Stream Decoder  Multichannel satellite decryption Computer Modules, Inc.  Content repurposing 11409 West Bernardo Court  Signal monitoring San Diego, CA 92127 Tel: (858) 613-1818 Fax: (858) 613-1815  IP to ASI and ASI to IP converter www.dveo.com Rear View

ASI IN Pb/B OUT DVB-S/S2 IP INPUT RS-232 MIRRORED LOOPTHROUGH DVB-S/S2 OR OUTPUT ASI OUTPUTS YG OUT OUTPUT INPUT

ASI OUT ASI SDI/HD-SDI HDMI Pr/R OUT CONNECT TO AUDIO 90-250V~ 50-60 Hz 50W MANAGEMENT IN OUT OUT MONITOR 1 & 2 PORT CVBS OUT Specifications

DVB-S2/S RF Input Transport Stream Processing Frequency range: 950-2150 MHz Demux and Remux among Tuner / DS3 TS Input (optional) / E3 (optional), ASI and TS/IP Input Level: -25～-65dBm Management: Input Impedance: 75Ω Inputs Connector: F-type female TS Output Demux and Remux for 2 independent Management: ASI outputs Symbol rate: 2～45 MBauds Service DVB-S QPSK: 0.35 Roll off factor: and PID Remux, filtering and remapping DVB-S2 8PSK: 0.35, 0.25, 0.2 Management: FEC Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 PSI/SI table regeneration, NIT and SDT DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, PSI/SI: Punctured edition, LCN Edition and Re-generation 8/9, 8/10 rates: DVB Common Scrambling Algorithm DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 Descrambler: (CSA) LNB Level: 0, 13V, 18V adjustable BISS Mode: BISS-1, BISS-E LNB Band Selection: 0/22 KHz selectable Common Double PCMCIA slots, compatible with Satellite Selection DiSEqC 1.0 Interface: major CA CAMs in the market Command:

DVB-ASI Input DVB-ASI Output Inputs: One input, one loopthrough input Outputs: Two outputs Connectors: Two BNC female, 75 ohm Standard: DVB-ASI, EN50083-9 Output Bit Rate: ≤ 99Mb/s Two Independent TS Re-multiplexed IP Input TS Processing: Protocols: UDP, RTP from tuner, TS/IP and 2 ASI inputs Type: Multicast, Unicast, IGMPv2, ARP Connectors: Two BNC female, 75 ohm Effective Bit 10/100 Base-T: 70Mb/s Rates: 1000 Base-T: 800Mb/s Ethernet RJ45, 100/1000 M Connector:

Computer Modules, Inc. 11409 West Bernardo Court San Diego, CA 92127 Tel: (858) 613-1818 Fax: (858) 613-1815 www.dveo.com

Specifications – Continued

Digital Video Processing Ancillary Data Processing MPEG-2 Subtitles: DVB, EBU

Video (MP@ ML for SD, MP@HL for HD) VBI: Teletext, WSS, VFD, VPS

Standards: MPEG 4/H.264 AVC Part 10 Closed Captioning: EIA 608, EIA 708, EIA 608-to-708

(MP@L3 for SD, [email protected] for HD) 1080i x 30, 1080i x 29.97, 1080i x 25, Redundancy SDI Video 720p x 60 Among Tuner, Two ASI inputs and Redundancy Port: Resolution: 720p x 59.94, 720p x 50, 576i x 25, TS/IP 480i x 29.97 Switching TS Sync Loss Video PID Bit Rate: < 80Mb/s Condition: Switching Mode: Main, Spare Digital Audio Processing 2 audio outputs are decoded or Number of Outputs: Control & Monitoring passed through Local: Front panel operation, LCD display Audio Sampling 32, 44.1 and 48 KHz SNMP, HTTP (Web Interface), Proprietary Rates: HDMS 32, 64, 96, 128, 160, 192, 224, 256, Remote: Audio Bit Rates – (Headend Device Management System) via 288, 320, 352, 384, 416, and 448 MPEG-1 Layer I: RJ45, 10/100 Base-T kb/s One RS-232 D-sub female, for debug use 32, 48, 56, 64, 80, 96, 112, 128, Serial Port: Audio Bit Rates – only 160, 192, 224, 256, 320, and 384 MPEG-1 Layer II: Equipment kb/s Embedded FTP loader and Telnet Upgrade: Nominal Output 1V p-p (with standard test stream) Level: Physical and Power Output Format: AES/EBU Power Supply: AC 90V ~ 250V, 50/60 Hz Load Impedance: 110Ω (with XLR adaptor cables) Power Consumption: 24W (exclusive of LNB power) 2 D-sub 9 male with XLR adaptor Connectors: 1.7 x 19 x 10 inches cables Dimensions – HxWxL: (44 x 483 x 255mm) Weight: 11.9 lbs (5.4 Kg) Operating Temperature: 32 to 113ºF (0 to 45ºC) Ships with cables shown below. Storage Temperature: 14 to 140 ºF (-10 to 60ºC) Operating Humidity: 10 ~ 90%, non-condensed

Certifications EN 55024:1998+A1:2001+A2:2003, EMC: EN 55022:2006+A1:2007, EN 61000-3-2:2006, EN 61000-3-3:2008 FCC: Part 15 Class B LVD: EN 60950-1:2006 + A11:2009

Ordering Information

reMux 4 IP+ASI/IP reMux DS3: Optional DS3 input and output Computer Modules, Inc. 11409 West Bernardo Court San Diego, CA 92127 © 2014 Computer Modules, Inc. DVEO and reMux are trademarks of Computer Modules, Inc. Dolby Digital is a registered trademark of Dolby Laboratories, Inc. All other trademarks and registered trademarks Tel: 858-613-1818 Fax: 858-613-1815 are the properties of their respective owners. All rights reserved. Specifications are subject to change without notice. www.dveo.com