DOCSLIB.ORG

Delivering Innovative Products and Services to Coatings Formulators Worldwide Helping You Achieve Performance, Value and Sustainability in Your Coatings Formulations

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Delivering Innovative Products and Services to Coatings Formulators Worldwide Helping You Achieve Performance, Value and Sustainability in Your Coatings Formulations PAINTS AND COATINGS / Delivering innovative products and services to coatings formulators worldwide Helping you achieve performance, value and sustainability in your coatings formulations Arkema has a comprehensive and unique portfolio of coatings materials and technologies for architectural and industrial coatings; building and decorative paints; transportation, marine and maintenance coatings; traffic paints; adhesives and sealants; electronics; inks and graphic arts; textiles, non-wovens and leather. Arkema is one of the leading suppliers of raw materials for coatings. Our objective is simple – help all of our coatings customers grow by meeting their needs, on every continent, for: Enhanced performance through innovative product technology that includes waterborne, solventborne, photocure, high solids, and powder coating resins; additives and rheology modifiers; acrylic monomers; and a wide range of specialty materials. Enhanced value by offering choices that help you find the best balance of performance and cost. Enhanced sustainability by providing products and technology that help you meet specific environmental regulations as well as your own sustainability goals. Arkema’s product portfolio for coatings Arkema’s technology and product range covers 99% of the coatings market. applications includes: Conventional solventbornes (resins and additives) Waterborne, solventborne and powder coating resins from Arkema’s Coating Resins activity. Waterborne emulsions for architectural (resins and additives) Specialty additives for coatings and adhesives from Arkema’s Waterborne industrial (resins and additives) Coating Resins activity. High solids Rheology additives for waterborne coatings, adhesives and sealants from Coatex. Powder (resins and additives) Radiation curables (2 %) and other High added value photocure resins for coatings, graphic arts, electronics, construction, automotive and other specialty applications from Sartomer. 5% 3% 39 Extreme weatherability for water, solvent or powder coatings % based on Kynar® polyvinylidene fluoride resins. 9 % High performance surface modification additives, including % Global Orgasol® and Rilsan® fine powders. 10 coatings market Amines for solvent-based and water-based paints. ~$95bn by technology DMSO polar aprotic solvent for special formulations and oxygenated solvents. % Nanostructured materials. 34 Specialty surfactants and polyols, functional fillers diatomite and perlite, and molecular sieves from Ceca. Acrylic monomers. Source “Paint & coating industry overview” – 2012 by Chemical Economics Handbook - SRI Consulting Methane sulfonic acid (MSA) esterification catalyst. 2 Access to a large portfolio of technologies for major coatings applications Decorative Paints Metal Coatings Solventborne resins: Waterborne rheological, Solventborne resins: Rheological and Synolac® texturing additives and Crayamid® texturing additives: Gelkyd® wetting agents: Kynar 500® FSF® Crayvallac ® Super Gelkyd® Ecodis™ Synolac® Orgasol ® Unithane® Coadis™ Synocryl® Rilsan ® Fine Powders Siliporite® Rheotech™ Synocure® Coadis ™ Coapur™ Coapur ™ Rheological and Waterborne resins: Alpamine® Rheotech ™ texturing additives: Synaqua® Ensoline® Crayvallac® ENCOR® Oxygenated solvents Surfaline® Orgasol® SECHA® and plasticizers: Alpamine® Vegetable oil based Kynar Aquatec® Diacetone alcohol Rilsan® Fine Powders monomers, additives Ensoline ® Powder resins: and plasticizers: Oxygenated solvents Rilsan® Fine Powders Building blocks: Oleris® and plasticizers: Reafree® Dianol ® Hexasol® Functional fillers: Adiansol ® Photocure resins: Methyl isobutylketone Clarcel® Ensoline® Sartomer® Ensoline® Randafil™ Inipol ® Sarbio® Noramium ® Waterborne resins: Reactive diluents: Sarbox® ENCOR® Sartomer® Catalyst: Vegetable oil based SNAP® M Cure® Methane sulfonic acid monomers, additives Synaqua® Sarbio® (MSA) and plasticizers: Kynar Aquatec® Oleris® Opacifiers: Celocor® Wood and Plastic Coatings Inks Solventborne resins: Vegetable oil based Solventborne resins: Dispersing agents: Synolac® monomers, additives Synolac® Coadis ™ Synocure® and plasticizers: Synocure® Oleris® Surface modifiers: Waterborne resins: Orgasol® Functional fillers: ENCOR® Rilsan® Fine Powders Clarcel® Surface modifiers: Randafil™ Photocure resins: Orgasol® Electronics Sartomer® Rheological and Crayvallac® Sarbio® leveling additives: Photocure resins: Photocure resins: Sarbox® Crayvallac® Sartomer® Sartomer® Coadis™ Waterborne resins: Sarbio® Sarbio® Coapur™ ENCOR® Sarbox® Sarbox® Rheotech™ Kynar Aquatec® Vegetable oil based Oxygenated solvents: monomers, additives Diacetone alcohol and plasticizers: Oleris® 3 Coating Resins More ways to meet your expectations Arkema’s Coating Resins activity is a leading supplier of waterborne, solventborne and powder resins along with additives and opacifiers for architectural coatings, industrial finishes, construction products, traffic paints, sealants, adhesives, inks, non-wovens, floor care and graphic arts products. Arkema’s Coating Resins activity offers you access to a truly comprehensive Worldwide presence range of coating resins options, plus innovation, sustainable technologies and local service and support wherever you operate around the world. In short, 20 production facilities in the we deliver more ways to meet your expectations for performance, value, Americas (USA, Brazil), Europe answers and options. (France, Italy, Spain, Comprehensive resources for architectural and industrial coatings, including The Netherlands, Germany) powder coatings; traffic paints; transportation, marine and maintenance and Asia Pacific (China, India, coatings; pressure sensitive adhesives; building and construction products, Malaysia) as well as inks and graphic arts; coatings for textiles, nonwoven and leather. 3 coatings R&D centers and 7 technical laboratories More product chemistry options, including a wide range of waterborne in Europe, Americas and Asia emulsions, opacifiers, waterborne and solventborne alkyds, powder coatings, polyester resins and additives for solventborne systems. Brand names More global resources, including product and service support for your business in Europe, North America, Asia, South America, Middle East and Africa. ENCOR® - Neocar® SNAP® More answers from a coordinated technical and sales support network EnVia® - Synaqua® Celocor® with sales offices, R&D and application development laboratories around Reafree® - Crayamid® Gelkyd® the world. Super Gelkyd® - Synocryl® Synocure® - Synolac® Unithane® Chempol® - Crayvallac® - SECHA® Worldwide presence Acrylic monomers 4 production facilities in France, A global market leader USA and China Arkema is a leading producer of acrylic 1 R&D center in France monomers, marketed under the Norsocryl® brand, and offers glacial acrylic acid, Brand name methyl acrylate, ethyl acrylate, n-butyl acrylate and 2-ethyl hexyl acrylate to enhance ® Norsocryl polymer performance. Thanks to their unique properties, acrylic monomers improve everyday life by making products last longer, creating more value for the paints and coatings industry, and providing a cleaner environment. 4 Coatex Rheology additives for waterborne paints. Add drops of vitamins to your paints and coatings! A subsidiary of Arkema, Coatex is a global designer and producer of rheology additives for aqueous formulations and water based processes. Worldwide presence Entirely dedicated to rheology additives for waterborne systems, Coatex has 6 production facilities in France, developed solutions for countless applications: minerals processing, paper The Netherlands, USA, Brazil, and board coating, paints and coatings formulations or construction and China and Korea applications for industrial specialties. 1 R&D center in France The evolution towards safe and eco-friendly formulations avoids the use of VOC* or APEO** components, and consequently, limits some properties Application laboratories such as storage stability or aspect. and technical service centers Coatex has designed waterborne additives that allow the fine-tuning of in Europe, USA, Brazil and rheology and therefore to recover or exceed the paint performances across China the entire value chain from production to film properties through storage or application while constantly reducing emissions and costs. Brand names This focus makes Coatex solutions unique and its portfolio one of the broadest Bumper Technology™, Coadis™, of the market, within each of the key rheology modifiers technologies, ™ waterborne thickeners and dispersing agents. Ecodis ™ ™ ™ Coapur , Rheotech , Thixol , ™ Thanks to in-house technologies and sustainability driven R&D efforts, Viscoatex Coatex additives meet the most stringent environmental regulations, VOC free, APEO free, heavy metal free. In addition to its R&D center in Europe, Coatex has technical centers providing formulation support to customers in Europe, Asia, North America and Latin America. Numerous projects are conducted jointly by Coatex teams in synergy within Arkema, this cross-technology expertise allows us to quickly develop innovative and adaptive solutions. *Volatile Organic Compounds **Alkyl phenol ethoxylate 5 Sartomer photocure resins Premier provider of high performance acrylates, methacrylates and unique specialty chemicals Sartomer’s products are widely used in UV, EB, peroxide and amine cure Worldwide presence technologies to enhance the performance of many applications: Specialty coatings (plastics, metals, wood and foils) 4 production facilities in France, Package coatings (food, health
Load more

Recommended publications
  • Liquid EPDM Dispersion
    Liquid EPDM Dispersion iquid ethylene propylene Recently, formulations Additionally, industrial In recent studies, three diene rubber (L-EPDM) blending the L-EPDM heat-cure formulations have coating formulations from Lhas been known in the (Figure 1) with other com- been developed for a broad a commercially available coatings industry for many mon coatings resins have range of temperatures. This low-molecular-weight liquid years. These elastomers have been developed. Elastomeric paper will discuss L-EPDM EPDM (L-EPDM) were found utility in ambient cure acrylics, alkyds and polyure- waterborne suspension and demonstrated; a peroxide liquid-applied roof coatings. thanes have been blended blend properties, coating crosslinking mechanism and These resins, formulated into with the L-EPDM without formulation, application and a sunshine UV crosslinking waterborne liquid coatings, the use of compatibiliz- curing methods, and final mechanism, and a dual-cure may be cured with peroxides, ers. Each of these systems film properties. system that uses both perox- metal driers, or UV radiation has seen unique property ide and UV.3,4,5 and can be used in ambient improvements, such as These formulations all maintenance coatings for flat surface wetting, adhesion, INTRODUCTION generate good EPDM rubber or low-slope roofs. impact strength, and more. Ethylene-Propylene Diene properties after crosslinking, (EPDM) rubber has been including high mechanical used extensively in auto- strength, low-temperature motive, wire and cable, flexibility, hydrophobic- roof membrane, and ther- ity, and adhesion to polar moplastic vulcanite (TPV) substrates. The formulations applications because of the meet industrial requirements ease of processing due to the as protective coatings in solid polymer’s unique structure.1,2 content, rheology, curing Many of the properties of speed, shelf life, pot life, and EPDM, notably, ozone and can be produced at a cost UV resistance, low-moisture consistent with commercial permeability, and excellent elastomeric acrylic coatings.
    [Show full text]
  • Research Article Corrosion Resistance of Waterborne Epoxy Resin Coating Cross- Linked by Modified Tetrabutyl Titanate
    Hindawi Scanning Volume 2020, Article ID 1392385, 9 pages https://doi.org/10.1155/2020/1392385 Research Article Corrosion Resistance of Waterborne Epoxy Resin Coating Cross- Linked by Modified Tetrabutyl Titanate Lingli Xu ,1 Zheng Chen,1 Fei Huang,1 Yinze Zuo,1 Xingling Shi ,1,2,3 and Xiaowei Zhou 1 1School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, China 212003 2Jiuyang Fishing Tackle Co., Ltd., Yangzhou, China 225008 3Jiangsu Gemei High-Tech Development Co., Ltd., Nantong, China 226009 Correspondence should be addressed to Xingling Shi; [email protected] and Xiaowei Zhou; [email protected] Received 15 June 2020; Accepted 21 August 2020; Published 6 October 2020 Guest Editor: Peter G. Keech Copyright © 2020 Lingli Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The development of waterborne coating is essentially important for environmental protection, and cross-linking agent is of great significance for ensuring corrosion resistance of the coating. In this work, tetrabutyl titanate was modified by ethylene glycol and tris(2-hydroxyethyl) amine and used for the solidification of waterborne acrylic-epoxy resin. Fourier-transform infrared spectroscopy (FTIR) analysis revealed that the agent reacted with OH groups first to cross-link the resin preliminarily, and then, when the amount of agent was further increased, the amino groups opened epoxide rings resulting in a secondary cross-link. Field emission scanning electron microscope (FESEM) observation and electrochemical impedance spectroscopy (EIS) test found that, when the cross-linking agent was used at 6%, the coating remains intact and kept an impedance of as high as 108Ωcm2 even after being immersed in NaCl solution for 30 days.
    [Show full text]
  • UV/EB CURABLE RESINS Product Guide - Americas
    UV/EB CURABLE RESINS Product Guide - Americas allnex Corporate Center allnex Americas Region Headquarters Frankfurt 9005 Westside Parkway The Squaire Alpharetta, GA 30009 Am Flughafen USA D 60549 Frankfurt am Main Germany The operating allnex group is legally owned by Allnex Holdings S.à r.l., a company based in Luxembourg, which also provides long term strategic decisions relating to its investment in allnex. www.allnex.com RAD002-AM-0318 www.allnex.com Lillestrm (NO) Wageningen (NL) Hamburg (DE) Bergen op oom (NL) Riga (LV) Frankfurt (DE) Silvertown (UK) Shebekino (RU) Ulsan (KR) Kalamazoo (MI) Schoonaarde (BE) Bitterfeld (DE) Wallingford (CT) Shimonoseki (P) East St Louis (IL) Drogenbos (BE) Graz (AT) Changshu (CN) Werndorf (AT) Otake (P) Willow Island (WV) Louisville (KY) Wiesbaden (DE) Suzhou (CN) Romano d’Ezzelino (IT) Shanghai (CN) Alpharetta (GA) Langley (SC) Foshan (CN) North Augusta (SC) Fengxian (CN) Bangkok (TH) Mumbai (IN) huhai (CN) Rayong (TH) Bien Hoa (VN) Seremban (MY) Melaka (MY) Surabaya (ID) Ponta Grossa (BR) Wacol (AU) Botany (AU) Table of Contents Penrose (N) Product Families.................................................................................................................................................4 Product Index......................................................................................................................................................4 UCECOAT® Waterborne UV Resins ...............................................................................................................6
    [Show full text]
  • Research Article Synthesis and Characterization of Nano-Tio2
    Hindawi Advances in Materials Science and Engineering Volume 2019, Article ID 6318623, 7 pages https://doi.org/10.1155/2019/6318623 Research Article Synthesis and Characterization of Nano-TiO2/SiO2-Acrylic Composite Resin Bin Du ,1,2 Feng Chen ,1 Rubai Luo ,1,2 Shisheng Zhou ,1,2 and Zhengneng Wu1 1Faculty of Printing, Packaging Engineering and Digital Media Technology, Xi’an University of Technology, Xi’an 710048, China 2Shaanxi Provincial Key Laboratory of Printing and Packaging Engineering, Xi’an University of Technology, Xi’an 710048, China Correspondence should be addressed to Rubai Luo; [email protected] Received 3 August 2018; Revised 6 November 2018; Accepted 13 December 2018; Published 3 January 2019 Academic Editor: Luigi Nicolais Copyright © 2019 Bin Du et al. )is is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Waterborne acrylic resin is widely used as a binder of waterborne printing ink because of its excellent comprehensive properties. However, its further developments and applications are hindered by its poor UV resistance and water resistance. )erefore, an approach to prepare acrylic resin with excellent UV resistance and water resistance is described in this present study. )e nano-TiO2/SiO2 composite particles were first modified with a silane coupling agent (KH-570) and a titanate coupling agent (NDZ-101) and then embedded into acrylic resin via a blending method. Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and thermogravimetry analysis (TGA) were applied to in- vestigate the structure and morphology of the modified nano-TiO2/SiO2 composite particles.
    [Show full text]
  • Want More Information About the New Waterborne Resins? Call 1-(866)826-3267
    FOR IMMEDIATE RELEASE Reading, PA July 24, 2019 Brenntag Signs Agreement with Arkema for Distribution of Waterborne Resins Effective August 1st, 2019, Brenntag North America, Inc., part of the Brenntag Group, the global market leader in chemical distribution, will become the primary distributor for Arkema Inc. waterborne resins in the United States. Arkema’s waterborne resins are often utilized in end use applications such as adhesives, caulks and sealants, construction products, architectural paints, traffic coatings, and industrial coatings. The product lines include over 45 waterborne resins falling under the below trade names: • Encor® - acrylic, styrene-acrylic, and vinyl acrylic. • Celocor® - opaque polymer, a highly efficient, voided latex product that improves hiding and whiteness in paints and coatings. • Neocar® - vinyl versatate. • Snap® - structured nano-acrylic polymer. "As we evaluated potential distribution collaborators in North America, we were impressed by Brenntag’s ability to market, deliver, and support products in industries where technical expertise is required,” Eric Kaiser, Regional President for Arkema’s Coating Resins business in North America, explained. “They have the resources and expertise necessary to ensure end users get the most from our waterborne resin products.” Steven Terwindt, Chief Operating Officer, Brenntag North America: “We are excited to expand our strategic relationship with Arkema in North America as part of our specialties growth strategy. Arkema’s high- performance waterborne resins and technologies will allow us to solidify our position as the partner of choice in the coatings, adhesives, and construction segment and enable us to offer our customers innovative solutions through a dedicated team of technical experts.” Some of the products sold under the Snap®, Neocar®, Celocor®, and Encor® names meet the standards of the Arkema Coating Resins EnVia® program.
    [Show full text]
  • Review of Recent Developments in the Formulation of Graphene-Based Coatings for the Corrosion Protection of Metals and Alloys
    corrosion and materials degradation Review Review of Recent Developments in the Formulation of Graphene-Based Coatings for the Corrosion Protection of Metals and Alloys Bronach Healy, Tian Yu, Daniele da Silva Alves and Carmel B. Breslin * Department of Chemistry, Maynooth University, Maynooth, Co. Kildare, Ireland; [email protected] (B.H.); [email protected] (T.Y.); [email protected] (D.d.S.A.) * Correspondence: [email protected] Received: 26 August 2020; Accepted: 23 September 2020; Published: 25 September 2020 Abstract: Corrosion is a naturally occurring phenomenon and there is continuous interest in the development of new and more protective coatings or films that can be employed to prevent or minimise corrosion. In this review the corrosion protection afforded by two-dimensional graphene is described and discussed. Following a short introduction to corrosion, the application of graphene in the formulation of coatings and films is introduced. Initially, reduced graphene oxide (rGO) and metallic like graphene layers are reviewed, highlighting the issues with galvanic corrosion. Then the more successful graphene oxide (GO), functionalised GO and polymer grafted GO-modified coatings are introduced, where the functionalisation and grafting are tailored to optimise dispersion of graphene fillers. This is followed by rGO coupled with zinc rich coatings or conducting polymers, GO combined with sol-gels, layered double hydroxides or metal organic frameworks as protective coatings, where again the dispersion of the graphene sheets becomes important in the design of protective coatings. The role of graphene in the photocathodic protection of metals and alloys is briefly introduced, while graphene-like emerging materials, such as hexagonal boron nitride, h-BN, and graphitic carbon nitride, g-C3N4, are then highlighted.
    [Show full text]
  • Brenntag Expands Agreement with Arkema for Distribution Of
    FOR IMMEDIATE RELEASE Reading, PA January 17, 2020 Brenntag Expands Agreement with Arkema for Distribution of Waterborne Resins in Canada Effective March 1st, 2020, Brenntag Canada Inc., part of the Brenntag Group, the global market leader in chemical and ingredient distribution, will become the primary distributor for Arkema Inc. waterborne resins in Canada. The expansion of this distribution agreement will follow a similar transition to the launch of the initial agreement covering the United States earlier in 2019. The product lines include over 45 waterborne resins and are often used in adhesives, caulks and sealants, construction products, architectural paints, traffic coatings, and industrial coatings applications. The relevant tradenames are: • Encor® – acrylic, styrene-acrylic, and vinyl acrylic. • Celocor® – opaque polymer, a highly efficient, voided latex product that improves hiding and whiteness in paints and coatings. • Neocar® – vinyl versatate. • Snap® – structured nano-acrylic polymer. “Brenntag’s ability to market, deliver, and support products in industries where technical expertise is required was a defining factor in making this decision,” Kenny Messer, regional president for Arkema’s coating resins business in North America explained. “They have the resources and expertise needed to help our customers get the most from their waterborne resin products.” Some resins meet the standards of the Arkema Coating Resins EnVia® program, which includes requirements such as no added alkyl phenol ethoxylate (APEO) surfactants, no added formaldehyde or formaldehyde donors, no intentionally added carcinogens, reproductive toxins, or ozone depleting compounds, and low residual monomer levels. "We are excited for Brenntag Canada to enter into this relationship and to represent Arkema for this innovative and technically advanced product line in Canada.
    [Show full text]
  • Uv/Eb Curable Resins Industrial Coatings
    UV/EB CURABLE RESINS INDUSTRIAL COATINGS Corporate Center Frankfurt The Squaire Am Flughafen D 60549 Frankfurt am Main Germany The operating allnex group is legally owned by Allnex Holdings S.à r.l., a company based in Luxembourg, which also provides long term strategic decisions relating to its investment in allnex. www.allnex.com www.allnex.com RAD002-EMEA-0317 Lillestrm (NO) Wageningen (NL) Hamburg (DE) Bergen op oom (NL) Riga (LV) Frankfurt (DE) Silvertown (UK) Shebekino (RU) Ulsan (KR) Kalamazoo (MI) Schoonaarde (BE) Bitterfeld (DE) Wallingford (CT) Shimonoseki (P) East St Louis (IL) Drogenbos (BE) Graz (AT) Changshu (CN) Werndorf (AT) Otake (P) Willow Island (WV) Louisville (KY) Wiesbaden (DE) Suzhou (CN) Romano d’Ezzelino (IT) Shanghai (CN) Alpharetta (GA) Langley (SC) Foshan (CN) North Augusta (SC) Fengxian (CN) Bangkok (TH) Mumbai (IN) huhai (CN) Rayong (TH) Bien Hoa (VN) Seremban (MY) Malakka (MY) Surabaya (ID) akarta (ID) Ponta Grossa (BR) Wacol (AU) Botany (AU) Penrose (N) Facts & Figures • Global company with over €2.1 billion in sales • 33 manufacturing facilities • Broad technology portfolio: liquid coating resins, • 23 research and technology centers energy curable resins, powder coating resins, • 5 ventures crosslinkers and additives, composites and • Extensive range of solutions for key coating segments: construction materials automotive, industrial, packaging coating and inks, • Approximately 4000 employees protective, industrial plastics and specialty With manufacturing, R&D and technical facilities located throughout Europe, North America, Asia Pacific and Latin America, • Customers in more than 100 countries architectural allnex offers global and reliable supply of resins and additives combined with local, responsive customer support.
    [Show full text]
  • Bondthane™ Waterborne Polyurethane Dispersions
    TM BONDTHANE WATERBORNE POLYURETHANES ENVIRONMENTALLY & USER FRIENDLY ADVANTAGES: • LOW ODOR • LOW V.O.C. • MAR RESISTANT • ALKALI RESISTANT • ABRASION RESISTANT • NON- FLAMMABLE • FLEXIBILITY HIGH PERFORMANCE POLYMERS • SOLVENT- FREE Bond Polymers International TM AVAILABLE ISO 9001:2008 Certified P.O. Box 2458 • HIGH TENSILE Seabrook, NH 03874 U.S.A. STRENGTH Phone: 603-474-3811 Fax: 603-474-3327 • COMPATIBILITY Email: [email protected] REVISION: 15 Why are people choosing Waterborne Polyurethane Products? Waterborne Polyurethanes are fully reacted Urethane polymers dispersed in water. These products contain no residual free isocyanate. These polymers are now being widely used in the coatings and adhesives industries, and are finding their way into other high performance niche applications every day. The reason for this is a simple one. Formulators and end users are coming under constantly increasing pressure to deliver high performance products that are environmentally and user friendly. Waterborne polyurethanes are one of few types of products that can deliver results in both areas. Waterborne polyurethanes can be selected to deliver high tensile strength, chemical resistance, high elongation, UV resistance, low temperature flexibility, water resistance, abrasion resistance, and/or impact resistance. Most waterborne polyurethanes can be crosslinked in a variety of ways to enhance these properties even further. These properties can be obtained with exceptionally low VOC’s to meet increasingly stringent clean air legislation. Waterborne polyurethanes are also generally very compatible with many other types of waterborne resins such as acrylics. They are used extensively as a modifier with other resins to enhance properties and lower VOC’s while maintaining a good cost/performance balance.
    [Show full text]
  • A Primer on Waterborne Coatings
    A PRIMER ON WATERBORNE COATINGS Pollution Prevention Opportunity Switching from solvent-based coatings to waterborne coatings can reduce costs and volatile organic compound (VOC) emissions. Background Coatings contain one or more solvents as a primary ingredient. Solvents dissolve the paint materials to form a liquid mixture that can be sprayed. Once applied to a part, the solvent evaporates, leaving behind the paint film. Water is frequently used as a solvent in waterborne coatings. Contrary to its name, waterborne coatings typically contain other solvents, or "cosolvents," which can make up as much as 30 percent of the product. Waterborne coatings have been around in one form or another for decades but have demonstrated greatly improved performance characteristics in recent years. Some common waterborne resins include acrylics, epoxies, alkyds, and polyurethanes. Switching to Waterborne Coatings If you think you might have an application for waterborne coatings, following are some suggested evaluation steps. 1. Determine the specific minimum performance requirements for the coating and make sure the selected waterborne products meet all the requirements. If there is not a commercially available coating that will meet specifications, a coating manufacturer may be willing to work with you on new formulations. 2. Request technical literature from the vendor including MSDS sheets, VOC content, regulations covering the product and its constituents, safe handling procedures, and equipment requirements. Next, evaluate whether the new alternative is really safer, less hazardous, and reduces regulatory obligations. Work through the VOC and hazardous air pollutants (HAPS) calculations for any proposed coatings. 3. Consider changes in transfer efficiency, coating thickness, and solids content using waterborne coatings, especially when estimating changes in purchasing and environmental reporting requirements.
    [Show full text]
  • Polymer Heterogeneity in Waterborne Coatings
    J. Coat. Technol. Res., 7 (1) 1–21, 2010 DOI 10.1007/s11998-009-9201-5 Polymer heterogeneity in waterborne coatings Ad Overbeek Ó The Author(s) 2009. This article is published with open access at Springerlink.com Abstract An overview is presented of the progress in nonblocking with high elasticity demand for innova- understanding polymer heterogeneity over the last tions. 20 years and how this has contributed to the improve- To make progress against these demanding targets, ment of coatings. Solvent-based polymers are homo- we can take nature as an example and also learn from geneous in nature, since all polymeric materials tend to the polymer alloy developments of the last decades. be dissolved in the same solvent mixture. This is Both apply the concept of heterogeneity to create new different for most waterborne polymers, which tend to and improved materials to fulfill a wide range of be present in a compartmentalized way. Most poly- functions. This article gives an overview of the differ- meric materials are present in particles, which are ent forms of polymer heterogeneity, discusses its separated by the continuous aqueous phase. This gives principles, and elucidates the relationship of composi- excellent opportunities to create particle morphologies tion, structure, and functions for a number of demand- that form the basis for the film morphology after drying ing coating applications. Based on these insights, future of the coating. This article gives an overview of the developments in waterborne coatings are envisaged. various types of heterogeneity which are accessible in waterborne polymers and will show how heterogeneity in the polymer can contribute to the solution of several Different levels of heterogeneity persistent problems of the coating industry.
    [Show full text]
  • Gradient Integrated Layered Coatings and Additives
    Gradient Integrated Layered Coatings and Additives J. Baghdachi1, and Gilbert Witte2 1Eastern Michigan University 2Paderborn university, Germany 1Innovative Technical Systems Corp. USA [email protected] Polymers and Coatings Industry-2019 Estimated worth of goods using polymers and Cost & Performance coatings $ 4-5 Trillion Inherently Multi-functionality Estimated Functional worth of Materials coatings and €/$ 5-9 $ 149 Billion Green Coatings Billion Sustainability Global industry survey, April. 2019 (Americas, EU, JP/KR) Trends in Coating Technology Development-2019 Coatings Wish List (Opportunities) . High performance coatings from sustainable materials……………….1 . Multi-functional coatings……………………………………………… 2 . Zero VOC waterborne coatings……………………………………… 3 . High-performance primerless/stratifying coatings…………………. 4 . Self-repair/easy-clean coatings……………………………………… 5 . Low-temperature curing coatings…………………………………… 6 . On-command cure/Instant set coatings*…………………………........7 . Corrosion and degradation sensing coatings……………………… 8 . Bioactive and Smart coatings……………………………………….. 9 . Super high solids automotive/industrial coatings………………….. 10 Global industry survey, April. 2019 (Americas, EU, JP/KR) Materials for Coatings-2019 Unmet Global Material Needs (Opportunities) . Bisphenol-A and hybrid polymers……………………………………… 1 . Property switching polymers 2 . Reactive coalescent agents……………………………………………. 3 . Multifunctional polymers* 4 . Responsive and switchable additives…………………………………. 5 . Surfactant free, non-whitening emulations 6 . Drop-in
    [Show full text]