DOCSLIB.ORG

Curriculum Vitae

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Curriculum Vitae Dr. Samad Ahadian Terasaki Institute for Biomedical Innovation 1018 Westwood Blvd., Los Angeles, CA 90024, USA Email: [email protected] Curriculum Vitae EDUCATION 2007 – 2011 Tohoku University, Japan Ph.D. in Materials Science 2003 – 2006 Amirkabir University of Technology, Iran M.Sc. in Polymer Engineering 1999 – 2003 Amirkabir University of Technology, Iran B.Sc. in Polymer Engineering WORK EXPERIENCE 2020 – now Assistant Professor Terasaki Institute for Biomedical Innovation (TIBI), USA 2018 – 2020 Development Engineer Department of Bioengineering, University of California-Los Angeles (UCLA), USA Center for Minimally Invasive Therapeutics (C-MIT), UCLA, USA 2017 – 2018 Biomaterials Scientist Covalon Technologies Ltd., Canada 2015 – 2017 Postdoctoral Research Fellow Institute of Biomaterials and Biomedical Engineering, University of Toronto, Canada 2014 – 2015 Assistant Professor Advanced Institute for Materials Research, Tohoku University, Japan 2011 – 2014 Postdoctoral Research Associate Advanced Institute for Materials Research, Tohoku University, Japan CV-Dr. Samad Ahadian Page 1 of 24 Dr. Samad Ahadian Terasaki Institute for Biomedical Innovation 1018 Westwood Blvd., Los Angeles, CA 90024, USA Email: [email protected] PUBLICATIONS (h-index = 25, Citations > 2360 BOOK CHAPTERS 1. Serge Ostrovidov, Azadeh Seidi, Samad Ahadian, Murugan Ramalingam and Ali Khademhosseini, Micro- and nanoengineering approaches to developing gradient biomaterials suitable for interface tissue engineering, Micro and Nanotechnologies in Engineering Stem Cells and Tissues edited by Murugan Ramalingam, Esmaiel Jabbari, Seeram Ramakrishna and Ali Khademhosseini, Wiley-IEEE Press, 2013, ISBN: 9781118140420. 2. Samad Ahadian, Murugan Ramalingam and Ali Khademhosseini, The emerging applications of graphene oxide and graphene in tissue engineering, Biomimetics: Advancing Nanobiomaterials and Tissue Engineering, edited by Murugan Ramalingam, Xiumei Wang, Guoping Chen, Peter Ma and Fu-Zhai Cui, John Wiley-Scrivener publishing, 2013, ISBN: 9781118469620. 3. Samad Ahadian, Serge Ostrovidov, Toshinori Fujie, Prakash Parthiban Selvakumar, Murugan Ramalingam, Hirokazu Kaji and Ali Khademhosseini, Microfabrication and nanofabrication techniques, Stem Cell Biology and Tissue Engineering in Dental Sciences edited by Ajaykumar Vishwakarma, Paul Sharpe, Songtao Shi and Murugan Ramalingam, Elsevier, 2014, ISBN: 9780123977786. 4. Raquel Obregón, Javier Ramón-Azcón, Samad Ahadian, Hitoshi Shiku, Murugan Ramalingam and Ali Khademhosseini, Gradient biomaterials as tissue scaffolds, Stem Cell Biology and Tissue Engineering in Dental Sciences edited by Ajaykumar Vishwakarma, Paul Sharpe, Songtao Shi and Murugan Ramalingam, Elsevier, 2014, ISBN: 9780123977786. 5. Toshinori Fujie, Serge Ostrovidov, Samad Ahadian, Prakash Parthiban Selvakumar, Ali Khademhosseini and Hirokazu Kaji, Bioinspired muscle tissue devices, Handbook of Biomimetics and Bioinspiration, World Scientific Publishing, 2014, ISBN: 9789814354929. 6. Raquel Obregón, Javier Ramón-Azcón and Samad Ahadian, Bioreactors in tissue engineering, Tissue Engineering for Artificial Organs, edited by Anwarul Hasan, John Wiley & Sons, 2017, ISBN: 9783527338634. 7. Samad Ahadian*, Rahaf Rahal, Javier Ramón-Azcón, Raquel Obregón and Anwarul Hasan, Biomaterials in tissue engineering: Prospects and challenges, Tissue Engineering for Artificial Organs, edited by Anwarul Hasan, John Wiley & Sons, 2017, ISBN: 9783527338634. *Corresponding author CV-Dr. Samad Ahadian Page 2 of 24 Dr. Samad Ahadian Terasaki Institute for Biomedical Innovation 1018 Westwood Blvd., Los Angeles, CA 90024, USA Email: [email protected] 8. Samad Ahadian*, Javier Ramón-Azcón and Raquel Obregón, Clinical translational aspects of nanofiber composites, Nanofiber Composites for Biomedical Applications, edited by Murugan Ramalingam and Seeram Ramakrishna, Elsevier, 2017, ISBN: 9780081001738. *Corresponding author 9. Raquel Obregón, Javier Ramón-Azcón and Samad Ahadian, Nanofiber composites in blood vessel tissue engineering, Nanofiber Composites for Biomedical Applications, edited by Murugan Ramalingam and Seeram Ramakrishna, Elsevier, 2017, ISBN: 9780081001738. 10. Samad Ahadian* and Milica Radisic, Nanotoxicity, Nanobiomaterials Science, Development and Evaluation, edited by Mehdi Razavi and Avnesh Thakor, Elsevier, 2017, ISBN: 9780081009635. *Corresponding author 11. Samad Ahadian*1, Farhad Batmanghelich*, Raquel Obregón, Deepti Rana, Javier Ramón-Azcón, Ramin Banan Sadeghian and Murugan Ramalingam, Carbon-based nanobiomaterials, Nanobiomaterials: Classification, Fabrication and Biomedical Applications, edited by Xiu-Mei Wang, Murugan Ramalingam, Xiangdong Kong and Lingyun Zhao, Wiley, 2018, ISBN: 9783527340675. *Authors who contributed equally to this work 1Corresponding author 12. Deepti Rana, Keerthana Ramasamy, Samad Ahadian, Geetha Manivasagam, Xiumei Wang and Murugan Ramalingam, Polymeric nanobiomaterials, Nanobiomaterials: Classification, Fabrication and Biomedical Applications, edited by Xiu-Mei Wang, Murugan Ramalingam, Xiangdong Kong and Lingyun Zhao, Wiley, 2018, ISBN: 9783527340675. 13. Sorour Darvishi*, Samad Ahadian*1 and Houman Savoji, Graphene-based nanomaterials in tissue engineering and regenerative medicine, Handbook of Graphene, I- VIII, edited by Edvige Celasco, Alexander N. Chaika, Tobias Stauber, Mei Zhang, Cengiz Ozkan, Umit Ozkan, Barbara Palys, Sulaiman Wadi Harun, Wiley, 2019, ISBN: 9781119459903. *Authors who contributed equally to this work 1Corresponding author JOURNALS ARTICLES 1. Samad Ahadian, Siamak Moradian, Farhad Sharif, Mohammad Amani Tehran and Mohsen Mohseni, Determination of time of capillary rise in porous media using artificial neural network (ANN), Iranian Journal of Chemistry and Chemical Engineering, 26 (2007) 71-83. CV-Dr. Samad Ahadian Page 3 of 24 Dr. Samad Ahadian Terasaki Institute for Biomedical Innovation 1018 Westwood Blvd., Los Angeles, CA 90024, USA Email: [email protected] 2. Samad Ahadian, Siamak Moradian, Farhad Sharif, Mohammad Amani Tehran and Mohsen Mohseni, Application of artificial neural network (ANN) in order to predict the surface free energy of powders using the capillary rise method, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 302 (2007) 280-285. 3. Samad Ahadian, Siamak Moradian, Farhad Sharif, Mohammad Amani Tehran and Mohsen Mohseni, An artificial neural network approach to capillary rise in porous media, Chemical Engineering Communications, 195 (2008) 435-448. 4. Samad Ahadian, Siamak Moradian, Mohsen Mohseni, Mohammad Amani Tehran and Farhad Sharif, Determination of surface tension and viscosity of liquids by the aid of the capillary rise procedure using artificial neural network (ANN), Iranian Journal of Chemistry and Chemical Engineering, 27 (2008) 7-15. 5. Samad Ahadian, Mohsen Mohseni and Siamak Moradian, Ranking proposed models for attaining surface free energy of powders using contact angle measurements, International Journal of Adhesion and Adhesives 29 (2009) 458-469. Highlighted as 13 of top 25 hottest articles of this Journal published within January to March 2009. 6. Samad Ahadian* and Yoshiyuki Kawazoe, Evaluation of the Cox equation to derive dynamic contact angle at nanopores imbibition: A molecular dynamics study, Materials Transactions 50 (2009) 1157-1160. *Corresponding author 7. Samad Ahadian* and Yoshiyuki Kawazoe, A molecular dynamics approach to examine the kinetics of the capillary imbibition of a polymer at nanoscale, Colloid and Polymer Science 287 (2009) 961-967. *Corresponding author 8. Samad Ahadian* and Yoshiyuki Kawazoe, An artificial intelligence approach for modeling and prediction of water diffusion inside a carbon nanotube, Nanoscale Research Letters 4 (2009) 1054-1058. *Corresponding author 9. Samad Ahadian*, Hiroshi Mizuseki and Yoshiyuki Kawazoe, An efficient tool for modeling and predicting fluid flow in nanochannels, Journal of Chemical Physics 131 (2009) 184506. Highlighted in the November 16, 2009 issue of Virtual Journal of Nanoscale Science and Technology. Also highlighted in the November 15, 2009 issue of Virtual Journal of Biological Physics Research. *Corresponding author CV-Dr. Samad Ahadian Page 4 of 24 Dr. Samad Ahadian Terasaki Institute for Biomedical Innovation 1018 Westwood Blvd., Los Angeles, CA 90024, USA Email: [email protected] 10. Samad Ahadian, Siamak Moradian and Mohammad Amani Tehran, Assessing the equation of state and comparing it with other relationships used for determining the surface tension of solids, Applied Surface Science 256 (2010) 1983-1991. 11. Samad Ahadian*, Hiroshi Mizuseki and Yoshiyuki Kawazoe, Prediction and analysis of flow behavior of a polymer melt through nanochannels using artificial neural network and statistical methods, Microfluidics and Nanofluidics 9 (2010) 319-328. *Corresponding author 12. Samad Ahadian*, Ahmad Ranjbar, Hiroshi Mizuseki and Yoshiyuki Kawazoe, A novel computational approach to study proton transfer in perfluorosulfonic acid membranes, International Journal of Hydrogen Energy 35 (2010) 3648-3655. *Corresponding author 13. Samad Ahadian*, Hiroshi Mizuseki and Yoshiyuki Kawazoe, On the kinetics of the capillary imbibition of a simple fluid through a designed nanochannel using the molecular dynamics simulation approach, Journal of Colloid and Interface Science 352 (2010) 566- 572. *Corresponding author 14. Samad Ahadian*, Hiroshi Mizuseki and Yoshiyuki Kawazoe, Effects of hydration level, temperature, side chain and backbone flexibility
Load more

Recommended publications
  • Meet the Faculty Candidates
    MEET THE FACULTY CANDIDATES Candidates are displayed in alphabetically by last name. Prospective employers are invited to attend and while no event pre-registration is required however they must be registered for the BMES 2018 Annual Meeting. A business card will be required to enter the event. COMPLETE DETAILED CANDIDATE INFORMATION AVAILABLE AT www.bmes.org/faculty. Specialty - Biomaterials Alessia Battigelli Woo-Sik Jang Sejin Son John Clegg Patrick Jurney Young Hye Song R. Cornelison Kevin McHugh Ryan Stowers Yonghui Ding Yifeng Peng Varadraj Vernekar Victor Hernandez-Gordillo Shantanu Pradhan Scott Wilson Marian Hettiaratchi Eiji Saito Yaoying Wu Era Jain Andrew Shoffstall Specialty - Biomechanics Adam Abraham Vince Fiore Panagiotis Mistriotis Edward Bonnevie Zeinab Hajjarian Simone Rossi Alexander Caulk Xiao Hu Alireza Yazdani Venkat Keshav Chivukula Heidi Kloefkorn Rana Zakerzadeh Jacopo Ferruzzi Yizeng Li Specialty - Biomedical Imaging Mahdi Bayat Chong Huang Katheryne Wilson Zhichao Fan Jingfei Liu Kihwan Han Alexandra Walsh Specialty - BioMEMS Jaehwan Jung Aniruddh Sarkar Mengxi Wu Specialty - Cardiovascular Engineering Reza Avaz Kristin French Zhenglun (Alan) Wei Specialty - Cellular Engineering Annie Bowles Kate Galloway Kuei-Chun Wang Alexander Buffone Laurel Hind Mahsa Dabagh Matthew Kutys See other side for more candidates Specialty - Device Engineering (Microfluidics, Electronics, Machine-Body interface) Taslim Al-Hilal Brian Johnson David Myers Jungil Choi Tae Jin Kim Max Villa Haishui Huang Jiannan Li Ying Wang Specialty
    [Show full text]
  • Engineering Photocrosslinkable Bicomponent Hydrogel Constructs
    www.advancedsciencenews.com www.advhealthmat.de FULL PAPER Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone Mehdi Kazemzadeh-Narbat, Jeroen Rouwkema, Nasim Annabi,* Hao Cheng, Masoumeh Ghaderi, Byung-Hyun Cha, Mansi Aparnathi, Akbar Khalilpour, Batzaya Byambaa, Esmaiel Jabbari, Ali Tamayol,* and Ali Khademhosseini* 1. Introduction Engineering bone tissue requires the generation of a highly organized vasculature. Cellular behavior is affected by the respective niche. Directing Even though bone tissue has a remarkable cellular behavior and differentiation for creating mineralized regions sur- regenerative capacity, large bone defects are often unable to fully heal on their rounded by vasculature can be achieved by controlling the pattern of own partially due to the destruction of osteogenic and angiogenic niches. This manuscript reports on engineering the local vascular network.[1,2] Traditional vascularized bone tissues by incorporating osteogenic and angiogenic approaches for treatment of large bone cell-laden niches in a photocrosslinkable hydrogel construct. Two-step defects include autologous bone transplan- photolithography process is used to control the stiffness of the hydrogel and tation and cancellous bone allografts.[3] distribution of cells in the patterned hydrogel. In addittion, osteoinductive Allografts carry the risk of immune rejec- tion.[4–7] Autologous bone grafts, particu- nanoparticles are utilized to induce osteogenesis. The size of microfabricated larly vascularized grafts of the fibula and constructs has a pronounced effect on cellular organization and function. iliac crest, are effective in the treatment It is shown that the simultaneous presence of both osteogenic and of large bone defects since they provide angiogenic niches in one construct results in formation of mineralized both an osteogenic environment and a [8] regions surrounded by organized vasculature.
    [Show full text]
  • Enabled Multimaterial Maskless Stereolithographic Bioprinting
    COMMUNICATION Bioprinting www.advmat.de Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting Amir K. Miri, Daniel Nieto, Luis Iglesias, Hossein Goodarzi Hosseinabadi, Sushila Maharjan, Guillermo U. Ruiz-Esparza, Parastoo Khoshakhlagh, Amir Manbachi, Mehmet Remzi Dokmeci, Shaochen Chen, Su Ryon Shin, Yu Shrike Zhang,* and Ali Khademhosseini* A stereolithography-based bioprinting platform for multimaterial fabrication of heterogeneous hydrogel constructs is presented. Dynamic patterning by a digital micromirror device, synchronized by a moving stage and a microfluidic device containing four on/off pneumatic valves, is used to create 3D constructs. The novel microfluidic device is capable of fast switching between different (cell-loaded) hydrogel bioinks, to achieve layer-by-layer multimaterial bioprinting. Compared to conventional stereolithography-based bioprinters, the system provides the unique advantage of multimaterial fabrication capability at high spatial resolution. To demonstrate the multimaterial capacity of this system, a variety of hydrogel constructs are generated, including those based on poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacryloyl (GelMA). The biocompatibility of this system is validated by introducing cell-laden GelMA into the microfluidic device and fabricating cellularized constructs. A pattern of a PEGDA frame and three different concentrations of GelMA, loaded with vascular endothelial growth factor, are further assessed for its neovascularization potential in a rat model. The proposed system provides a robust platform for bioprinting of high-fidelity multimaterial microstructures on demand for applications in tissue engineering, regenerative medicine, and biosensing, which are otherwise not readily achievable at high speed with conventional stereolithographic biofabrication platforms. Dr. A. K. Miri, Prof. D. Nieto, L. Iglesias, H. Goodarzi Hosseinabadi, Dr. A. Manbachi Dr.
    [Show full text]
  • Engineered Materials That Integrate Advances in Polymer Chemistry, Nanotechnology, and Biological Sciences Have the Potential to Create Powerful Medical Therapies
    Title of Talk: Engineering in Precision Medicine Abstract: Engineered materials that integrate advances in polymer chemistry, nanotechnology, and biological sciences have the potential to create powerful medical therapies. Dr. Khademhosseini’s group is interested in developing ‘personalized’ solutions that utilize micro- and nanoscale technolgoies to enable a range of therapies for organ failure, cardiovascular disease and cancer.In enabling this vision he works closely with clinicians (including interventional radiologists, cardiologists and surgeons). For example, he has developed numerous techniques in controlling the behavior of patient- derived cells to engineer artificial tissues and cell-based therapies. His group also aims to engineer tissue regenerative therapeutics using water-containing polymer networks called hydrogels that can regulate cell behavior. Specifically, he has developed photo-crosslinkable hybrid hydrogels that combine natural biomolecules with nanoparticles to regulate the chemical, biological, mechanical and electrical properties of gels. These functional scaffolds induce the differentiation of stem cells to desired cell types and direct the formation of vascularized heart or bone tissues. Since tissue function is highly dependent on architecture, he has also used microfabrication methods, such as microfluidics, photolithography, bioprinting, and molding, to regulate the architecture of these materials. He has employed these strategies to generate miniaturized tissues. To create tissue complexity, he has also developed directed assembly techniques to compile small tissue modules into larger constructs. It is anticipated that such approaches will lead to the development of next-generation regenerative therapeutics and biomedical devices. PLENO-IDEA: New materials for tissue engineering that can mimic natural tissue structure Presenters Biography: Ali Khademhosseini is currently the CEO and Founding Director at the Terasaki Institute for Biomedical Innovation.
    [Show full text]
  • ALI KHADEMHOSSEINI Partners Research Building 65 Landsdowne Street, Rm
    ALI KHADEMHOSSEINI Partners Research Building 65 Landsdowne Street, Rm. 265 Cambridge, MA, USA 02139 http://mit.edu/aliklab Office: (617) 768-8395 Fax: (617) 768-8477 Mobile: (617) 388-9271 [email protected] EDUCATION: September 2001- Massachusetts Institute of Technology (MIT) April 2005 Ph.D. in Bioengineering • PhD Thesis: “Nanoscale and microscale approaches for engineering the in vitro cellular microenvironment”; Supervisor: Robert Langer • Cumulative GPA: 5.0/5.0 September 1999- University of Toronto (U of T) August 2001 M.A.Sc. in Chemical Engineering and Applied Chemistry in Collaboration with Institute of Biomaterials and Biomedical Engineering (IBBME) • Masters Thesis: “In vitro study of bone marrow derived progenitor cells in liver- like microenvironments” ; Supervisor: Peter Zandstra and Michael Sefton September 1995- University of Toronto May 1999 B.A.Sc. in Chemical Engineering and Applied Chemistry and Collaborative Program in Environmental Engineering (graduated with honors) • Undergraduate Thesis: “A novel method to conformally coat mammalian cells using magnetically driven beads”; Supervisor: Michael Sefton th • Cumulative Average, 1996-99: 88% (4 year average: 93% - rank: 2 of 73) September 1990- Jarvis Collegiate Institute June 1995 Ontario Secondary School Diploma (Ontario Scholar) RECENT AWARDS AND HONORS: • BMW Group Scientific award “Passion for Innovation”- 2007 • TR35 – Technology Review Top Young Innovator award – 2007 • Ignited Minds Undergraduate Mentoring Award - 2007 • Coulter Foundation Early Career Award - 2006 • OMNOVA/MIT Program for Polymer Science and Technology - OMNOVA Solutions Signature University Award for Outstanding contribution to Polymer-related Research- 2005 • Biomedical Engineering Society Outstanding Graduate Student Award – 2005 st • 1 prize presentation at the Current Progress in Tissue Engineering Conference – 2005 (with 5 others) • MIT – Patrick J.
    [Show full text]
  • Synthesis, Properties, and Biomedical Applications of Gelatin Methacryloyl (Gelma) Hydrogels
    Biomaterials 73 (2015) 254e271 Contents lists available at ScienceDirect Biomaterials journal homepage: www.elsevier.com/locate/biomaterials Review Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels Kan Yue a, b, 1, Grissel Trujillo-de Santiago a, b, c, 1, Mario Moises Alvarez a, b, c, ** * Ali Tamayol a, b, Nasim Annabi a, b, d, e, , Ali Khademhosseini a, b, d, f, a Biomaterials Innovation Research Center, Division of Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Boston 02139, MA, USA b Harvard-Massachusetts Institute of Technology Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge 02139, MA, USA c Centro de Biotecnología-FEMSA, Tecnologico de Monterrey at Monterrey, Ave. Eugenio Garza Sada 2501 Sur Col. Tecnologico, CP 64849 Monterrey, Nuevo Leon, Mexico d Wyss Institute for Biologically Inspired Engineering, Harvard University, Boston 02115, MA, USA e Department of Chemical Engineering, Northeastern University, Boston, MA 02115-5000, USA f Department of Physics, King Abdulaziz University, Jeddah 21569, Saudi Arabia article info abstract Article history: Gelatin methacryloyl (GelMA) hydrogels have been widely used for various biomedical applications due Received 16 June 2015 to their suitable biological properties and tunable physical characteristics. GelMA hydrogels closely Received in revised form resemble some essential properties of native extracellular matrix (ECM) due to the presence of cell- 19 August 2015 attaching and matrix metalloproteinase responsive peptide motifs, which allow cells to proliferate and Accepted 25 August 2015 spread in GelMA-based scaffolds. GelMA is also versatile from a processing perspective. It crosslinks Available online 28 August 2015 when exposed to light irradiation to form hydrogels with tunable mechanical properties.
    [Show full text]
  • BIOMATERIALS FORUM • Third Quarter 2010 1 SFB-Bf1001covers.Qxd 6/15/10 1:08 PM Page 3
    BIOMATERIALS FORUM • Third Quarter 2010 1 SFB-BF1001covers.qxd 6/15/10 1:08 PM Page 3 Biomaterials Forum, the official news magazine of the Society For Biomaterials, is published quarterly to serve the biomaterials community. Society members receive Biomaterials Forum as a benefit of membership. Non-members may subscribe to the magazine at the annual rate of $48. For subscription information or member- ship inquiries, contact the Membership Department at the Society office (e-mail: [email protected]) or visit the Society’s web site, www.biomaterials.org. The official news magazine of the SOCIETY FOR BIOMATERIALS • Volume 32, Issue 3 It is the policy of the Society For Biomaterials that all articles reflect only the views of the Executive Editor Karen Burg, Clemson University, Department of Bioengineering authors. Publication of articles or advertisements 401 Rhodes Engineering Research Center, Clemson, SC 29634 within Biomaterials Forum does not constitute Phone: (864) 656-6462 • Fax: (864) 656-4466 endorsement by the Society or its agents of E-mail: [email protected] products, services or views expressed herein. No Erik Caplan, Society For Biomaterials representation is made to the accuracy hereof, Managing Editor 15000 Commerce Parkway, Mt. Laurel, NJ 08054 and the publication is printed subject to errors Phone: (856) 793-0901 • Fax: (856) 439-0525 and omissions. Articles that do not have an E-mail: [email protected] author byline may originate from press releases. Government News The Society For Biomaterials retains press Joy Dunkers, National Institute of Standards and Technology Contributing Editor E-mail: [email protected] releases on file for a period of one year from the date of publication.
    [Show full text]
  • Front Matter
    MICRO AND NANOTECHNOLOGIES IN ENGINEERING STEM CELLS AND TISSUES ieee ed board_grid.qxd 1/8/2013 7:52 AM Page 1 IEEE Press 445 Hoes Lane Piscataway, NJ 08854 IEEE Press Editorial Board 2013 John Anderson, Editor in Chief Linda Shafer Saeid Nahavandi George Zobrist George W. Arnold David Jacobson Tariq Samad Ekram Hossain Mary Lanzerotti Dmitry Goldgof Om P. Malik Kenneth Moore, Director of IEEE Book and Information Services (BIS) MICRO AND NANOTECHNOLOGIES IN ENGINEERING STEM CELLS AND TISSUES Edited by MURUGAN RAMALINGAM ESMAIEL JABBARI SEERAM RAMAKRISHNA ALI KHADEMHOSSEINI Copyright # 2013 by The Institute of Electrical and Electronics Engineers, Inc. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. All rights reserved. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose.
    [Show full text]
  • Additive Manufacturing Technologies For
    Additive manufacturing technologies for biomedical engineering applications: Research trends and scientific impact Enara Zarrabeitia-Bilbao; Izaskun Álvarez-Meaza; Rosa-María Río-Belver; Gaizka Garechana-Anacabe How to cite this article: Zarrabeitia-Bilbao, Enara; Álvarez-Meaza, Izaskun; Río-Belver, Rosa-María; Garechana-Anacabe, Gaizka (2019). “Additive manufacturing technologies for biomedical engineering applications: Research trends and scientific impact”. El profesional de la información, v. 28, n. 2, e280220. https://doi.org/10.3145/epi.2019.mar.20 Article received on 9 November 2018 Approved on 11 March 2019 Enara Zarrabeitia-Bilbao * Izaskun Álvarez-Meaza https://orcid.org/0000-0002-2347-3885 https://orcid.org/0000-0002-2110-0719 University of the Basque Country (UPV/EHU) University of the Basque Country (UPV/EHU) Faculty of Engineering in Bilbao Faculty of Engineering in Bilbao Industrial Organization and Management Industrial Organization and Management Engineering Department Engineering Department Plaza Ingeniero Torres Quevedo, 1. 48013 Plaza Ingeniero Torres Quevedo, 1. 48013 Bilbao, Spain Bilbao, Spain [email protected] [email protected] Rosa-María Río-Belver Gaizka Garechana-Anacabe https://orcid.org/0000-0002-4244-9098 https://orcid.org/0000-0002-1913-3239 University of the Basque Country (UPV/EHU) University of the Basque Country (UPV/EHU) Faculty of Engineering in Vitoria-Gasteiz Faculty of Economics and Business in Bilbao Industrial Organization and Management (Elcano) Engineering Department Industrial Organization and Management C/ Nieves Cano 12, 01007 Vitoria, Spain Engineering Department [email protected] C/ Elcano 21 48008 Bilbao, Spain [email protected] Abstract Additive Manufacturing (AM) technologies, technologies that produce three-dimensional parts layer by layer from a ma- terial, have the potential to revolutionize the paradigm of manufacturing.
    [Show full text]
  • Mussel-Inspired Multifunctional Hydrogel Coating for Prevention of Infections and Enhanced Osteogenesis
    HHS Public Access Author manuscript Author ManuscriptAuthor Manuscript Author ACS Appl Manuscript Author Mater Interfaces Manuscript Author . Author manuscript; available in PMC 2018 April 05. Published in final edited form as: ACS Appl Mater Interfaces. 2017 April 05; 9(13): 11428–11439. doi:10.1021/acsami.6b16779. Mussel-Inspired Multifunctional Hydrogel Coating for Prevention of Infections and Enhanced Osteogenesis Hao Cheng†,‡,§, Kan Yue†,‡, Mehdi Kazemzadeh-Narbat†,‡, Yanhui Liu†,‡,||, Akbar Khalilpour†,‡, Bingyun Li⊥, Yu Shrike Zhang†,‡, Nasim Annabi†,‡,#,*, and Ali Khademhosseini†,‡,∇,○,* †Biomaterials Innovation Research Center, Division of Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, Cambridge, Massachusetts 02139, United States ‡Harvard–MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States §Othopeadic Department, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan 430030, China ||College of Textiles, Donghua University, Shanghai, 201620, China ⊥Department of Orthopaedics, School of Medicine, West Virginia University, Morgantown, West Virginia 26506, United States #Department of Chemical Engineering, Northeastern University, Boston, Massachusetts 02115-5000, United States ∇Department of Bioindustrial Technologies, College of Animal Bioscience and Technology, Konkuk University, Seoul, 143-701, the Republic of Korea ○Department of Physics, King Abdulaziz
    [Show full text]
  • Esmaiel Jabbari CV 3/2021
    Curriculum Vitae Esmaiel Jabbari Esmaiel Jabbari Full Professor of Chemical and Biomedical Engineering Swearingen Engineering Center, Rm 2C11 University of South Carolina, 301 Main Street, Columbia, SC 29208 Office: (803) 777-8022 Cell: 803-730-4911 Fax: (703) 777-8265 E-mail: [email protected] [email protected] Global Unique Identifier (GUID): Web of Science Research ID: AAJ-2369-2020 Publon ID: AAJ-2369-2020 ORCID ID: 0000-0001-6548-5422 ORCID QR Code: TWITTER: @EsmaielJabbari Web links Univ South Carolina ECHE http://www.che.sc.edu/faculty/jabbari/ Univ South Carolina BME http://biomed.engr.sc.edu/faculty/jabbari.htm My NCBI in National Center for Biotechnology Information (NCBI) Domain http://www.ncbi.nlm.nih.gov/sites/myncbi/1FWvbhQo9Tr5w/bibliography/48222775/public/?sort=date& direction=ascending AIMBE Website http://aimbe.org/college-of-fellows/cof-1518/ WIKIPEDIA PAGE http://en.wikipedia.org/wiki/Esmaiel_Jabbari SCHOLAR COMMONS http://scholarcommons.sc.edu/do/search/advanced/?q=author%3A(%20esmaiel%20jabbari%20)&start=0& context=1297624&sort=score GOOGLE SCHOLAR http://scholar.google.com/citations?user=toBei-UAAAAJ&hl=en LinkedIn https://www.linkedin.com/pub/esmaiel-jabbari/2b/59b/b8 ReserachGate http://www.researchgate.net/profile/Esmaiel_Jabbari SelectedWorks http://works.bepress.com/esmaiel_jabbari/ KUDOS https://www.growkudos.com/articles/search?q=Professor+Esmaiel+Jabbari EDITED BOOK http://www.worldscientific.com/sda/1043/biomimetics-bioinspiration.pdf EDITED BOOK http://www.worldscientific.com/worldscibooks/10.1142/7646 1 Curriculum Vitae Esmaiel Jabbari EDITED BOOK http://www.wiley.com/WileyCDA/WileyTitle/productCd-1118140427.html AREAS OF INTEREST Bioinspired materials, Skeletal tissue engineering, Multi‐scale composite materials, Self-assembled nanogels for growth factor delivery, Drug targeting to cancer stem cells, Stem cell encapsulation and delivery, Three-dimensional tissue models EDUCATION Ph.D.
    [Show full text]
  • BDMC2018 Program
    Welcome message On behalf of the scientific committee, we courteously welcome you to participate in Hangzhou International Conference on Biomaterials, Bio-Design and Manufacturing (BDMC2018) in conjunction with H2020 BAMOS Project 2018 Meeting, which will be held in Hangzhou, China during August 27-28, 2018. The objective of the conference is to promote the academic exchange of researchers from universities and industries in the field of biomanufacturing, with the hope of enhancing also the influence of the journal of Bio-Design and Manufacturing. Hangzhou is a rapid developing international metropolis located in the eastern China, full of splendid culture and beautiful legends. Zhejiang University is one of the top 5 universities in China. It hosted NSFC biomanufacturing conference last year, 60 scholars across disciplines gathered together to discuss the roadmap of biomanufacturing in China. The joint research laboratory on 3D bioprinting of Zhejiang University and Oxford University was set up to explore the frontiers of this field. Welcome to Hangzhou, we hope you have a pleasant time here. Huayong Yang Zhanfeng Cui Chair, BDMC 2018 Co-chair, BDMC 2018 Zhejiang University, China University of Oxford, United Kingdom Table of Contents 1. Conference Schedule 5 2. Organizers 9 3. Committee 10 4. Plenary Talk 14 5. Keynote Talk 21 6. Technical Program 29 7. General Information 39 Notes 45 1. Conference Schedule Schedule at a Glance Aug. 26 Aug. 27 Aug. 28 Morning – I Registration Registration Open ceremony Morning – II Registration Plenary
    [Show full text]