Implementation of Machining on the Cloud: A Case Study in PLM Environment Saurav Bhatt, Frédéric Segonds, Nicolas Maranzana, Ameziane Aoussat, Vincent Frerebeau, Damien Chasset To cite this version: Saurav Bhatt, Frédéric Segonds, Nicolas Maranzana, Ameziane Aoussat, Vincent Frerebeau, et al.. Implementation of Machining on the Cloud: A Case Study in PLM Environment. 13th IFIP Interna- tional Conference on Product Lifecycle Management (PLM), Jul 2016, Columbia, SC, United States. pp.341-355, 10.1007/978-3-319-54660-5_31. hal-01699699 HAL Id: hal-01699699 https://hal.inria.fr/hal-01699699 Submitted on 2 Feb 2018 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Distributed under a Creative Commons Attribution| 4.0 International License Implementation of Machining on the Cloud: A case study in PLM environment Saurav Bhatt1,3, Frédéric Segonds2, Nicolas Maranzana2, Améziane Aoussat2, Vincent Frerebeau3, Damien Chasset3 1 Delhi College of Engineering, Delhi, India 2 Arts et Métiers, Paris Tech, LCPI, 151 Boulevard de l’Hôpital, 75013 Paris, France 3 Dassault Systemes, 10 Rue Marcel Dassault, 78140 Velizy Villacoublay, France
[email protected] Abstract. This paper focuses on the implementation of cloud solutions in the field of machining which is encompassed by the much larger field of manufacturing.