DOCSLIB.ORG

普华桌面操作系统V4.0 （Isoft Desktop OS V4.0） 用户手册

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
普华桌面操作系统V4.0 （Isoft Desktop OS V4.0） 用户手册 普华桌面操作系统 V4.0 （iSoft Desktop OS V4.0） 用户手册 普华基础软件股份有限公司 地址：北京市海淀区农大南路 1 号硅谷亮城 4 号楼 5 层 普华桌面操作系统 V4.0 用户手册 版权声明 本软件受相应版权法保护，并在 GNU GPL 约束其使用、拷贝、发布及反编 译的授权下发布。在未经普华基础软件股份有限公司（以下简称普华软件公司） 事先书面授权的情况下，文档的任何部分都不得以任何形式和途径进行复制、修 改及分发。本手册在编写过程中由于已考虑了各种可能的预防措施，普华软件公 司对可能出现的内容错误及缺失不承担责任。 此出版物仅以其原有的存在形式提供，不含任何种类的明示或默示，包括但 不仅限于那些隐含的用于商业目的的、为某种特定目的而定制的、或无特定目的 的担保。此出版物可能会出现技术上的失误或印刷上的错误。其更正将不断添加 于此，并合并到此出版物的最新版本中。 普华软件公司保留在任何时刻对此出版物介绍的产品和/或程序进行添加和 /或修改的权利。 本文档的最终解释权归属于普华软件公司。 ©2014，版权所有：普华基础软件股份有限公司。 普华基础软件股份有限公司 版权所有 普华桌面操作系统 V4.0 用户手册 前言 《普华桌面操作系统 V4.0 用户手册》描述了使用普华桌面操作系统软件 V4.0 必须的入门知识以及如何在 KDE 桌面环境下完成日常工作。主要内容包 括： 1) 登录、退出和关闭系统 2) KDE 桌面环境的外观和基本操作 3) 桌面观感定制和基本硬件及系统配置 4) 中文环境和中文输入法 5) 全新的文件和资源管理 6) 桌面应用程序介绍和使用 本书的适用对象 本手册帮助用户开始使用普华桌面操作系统软件 V4.0，并学习如何在 KDE 桌面环境下执行日常的配置和工作任务。 本手册适用于普华 Linux 的初级使用者，如果您已经具有使用普华 Linux 的经验，也可以从中了解关于普华桌面操作系统软件 V4.0 系统的新特性。 手册内容 本手册共分为 7 章： 1) 第 1 章 入门介绍 2) 第 2 章 系统和桌面配置 3) 第 3 章 打印配置 4) 第 4 章 网络配置 5) 第 5 章 文件和资源管理 6) 第 6 章 中文输入 普华基础软件股份有限公司 版权所有 普华桌面操作系统 V4.0 用户手册 7) 第 7 章 桌面应用程序 8) 第 8 章 软件安装 9) 第 9 章 WPS Office For Linux 手册约定 为了方便读者阅读，本手册采用如下约定。 项目 说明 正文中，中文均采用宋体字体，西文均采用 Verdana 字 宋体，Verdana 体。 各级标题均采用加粗黑体或加粗宋体，并且加粗字体代表 加粗字体 在正文描述中的强调文字。 在描述操作过程时，操作界面上的元素（包括按钮、菜单、 “菜单” 、“对话 对话框等等），使用中文引号将按钮、菜单或对话框引起。 框”、“按钮” 例如：如果用户确定执行操作，则单击“确定”按钮。 多级菜单采取用符号“→”连接的方式描述。 → 例如：选择菜单栏中的“文件”→“新建”。 键盘上的键。 例如：<Enter>、<Tab>、<Backspace>、<a>等分 别表示回车、制表、退格、小写字母 a；<键 1 + 键 2> <键名> 表示在键盘上同时按下几个键，如<Ctrl+Alt+A>表示同 时按下“Ctrl”、“Alt”、“A”这三个键；<键 1，键 2>表示 先按第一键，释放，再按第二键，如<Alt，F>表示先按 <Alt>键，释放后再按<F>键。 在正文中提醒读者注意的信息。 在正文中需要特别说明的事项。 普华基础软件股份有限公司 版权所有 普华桌面操作系统 V4.0 用户手册 目 录 第 1 章 入门介绍 .................................................................. - 1 - 简介 ..................................................................... - 1 - 启动系统 ............................................................... - 1 - 开始和结束操作 ....................................................... - 2 - 1.3.1 登录 ........................................................... - 2 - 1.3.2 进入桌面环境 ................................................ - 3 - 1.3.3 退出系统 ...................................................... - 4 - 桌面系统 ............................................................... - 6 - 1.4.1 初识 KDE..................................................... - 6 - 1.4.2 桌面组件...................................................... - 7 - 1.4.3 使用菜单...................................................... - 9 - 1.4.4 解锁部件..................................................... - 14 - 1.4.5 窗口操作..................................................... - 17 - 1.4.6 启动应用程序 ............................................... - 19 - 1.4.7 KDE 中的快捷键 ........................................... - 19 - 在桌面中使用命令 ................................................... - 19 - 1.5.1 使用系统终端 ............................................... - 19 - 1.5.2 运行命令..................................................... - 20 - 剪贴板 ................................................................. - 21 - 帮助系统 .............................................................. - 22 - 第 2 章 系统和桌面配置 ....................................................... - 24 - 系统设置概述 ......................................................... - 24 - 外观 .................................................................... - 27 - 2.2.1 工作空间主题 ............................................... - 27 - 2.2.2 颜色 .......................................................... - 32 - 2.2.3 图标 .......................................................... - 36 - 2.2.4 字体 .......................................................... - 40 - 2.2.5 应用程序风格 ............................................... - 42 - 工作空间 .............................................................. - 46 - 2.3.1 桌面行为..................................................... - 46 - 2.3.2 窗口管理..................................................... - 56 - 2.3.3 快捷键 ....................................................... - 60 - 2.3.4 开机和关机 .................................................. - 64 - 2.3.5 搜索 .......................................................... - 68 - 个性化 ................................................................. - 69 - 2.4.1 账户细节..................................................... - 69 - 2.4.2 区域设置..................................................... - 71 - 2.4.3 通知 .......................................................... - 78 - 2.4.4 应用程序..................................................... - 79 - 网络 .................................................................... - 84 - 2.5.1 网络设置..................................................... - 84 - 2.5.2 代理 .......................................................... - 85 - 普华基础软件股份有限公司 版权所有 普华桌面操作系统 V4.0 用户手册 系统管理 .............................................................. - 85 - 2.6.1 系统更新设置 ............................................... - 85 - 2.6.2 分区管理..................................................... - 86 - 硬件 .................................................................... - 88 - 2.7.1 输入设备..................................................... - 88 - 2.7.2 显示与监控 .................................................. - 93 - 2.7.3 多媒体 ....................................................... - 95 - 2.7.4 蓝牙 .......................................................... - 98 - 2.7.5 电源管理................................................... - 100 - 2.7.6 数码相机................................................... - 103 - 2.7.7 设备动作................................................... - 105 - 第 3 章 打印配置 .............................................................. - 106 - 添加打印机 ......................................................... - 106 - 使用打印机 ......................................................... - 109 - 第 4 章 网络配置 .............................................................. - 111 - 有线连接 ............................................................ - 111 - 无线连接 ............................................................ - 112 - 连接编辑器 ......................................................... - 112 - 4.3.1 添加网络连接 ............................................. - 112 - 4.3.2 编辑网络连接 ............................................. - 114 - 4.3.3 配置快捷键 ................................................ - 115 - 第 5 章 文件和资源管理 ..................................................... - 116 - 基础知识 ............................................................ - 116 - 5.1.1 文件命名................................................... - 116 - 5.1.2 路径 ........................................................ - 116 - 5.1.3 文件类型................................................... - 117 - 5.1.4 目录结构................................................... - 117 - 进入文件管理器 .................................................... - 119 - 5.2.1 菜单栏 ..................................................... - 120 - 5.2.2 工具栏 ..................................................... - 120 - 5.2.3 地址栏 ..................................................... - 120 - 5.2.4 窗口区 ..................................................... - 120 - 设置文件管理器 .................................................... - 120 - 5.3.1 显示/隐藏菜单栏 ......................................... - 121 - 5.3.2 配置快捷键 ................................................ - 122 - 5.3.3 配置工具栏 ................................................ - 123 - 5.3.4 配置文件管理器 .......................................... - 124 - 在文件管理器中工作 .............................................. - 132 - 5.4.1 创建新文件 ................................................ - 132 - 5.4.2 文件的选择 ................................................ - 132 - 5.4.3 文件属性设置 ............................................. - 132 - 5.4.4 删除文件与目录 .......................................... - 133 - 5.4.5 网上邻居................................................... - 133 - 高级功能 ............................................................ - 134 - 普华基础软件股份有限公司 版权所有 普华桌面操作系统 V4.0 用户手册 5.5.1 快捷方式................................................... - 134 - 5.5.2 查找 ........................................................ - 135 - 5.5.3 改变视图................................................... - 135 - 第 6 章 中文输入 .............................................................. - 136 - 使用 fcitx ........................................................... - 136 - 6.1.1 启动输入法程序 .......................................... - 136 - 6.1.2 开启中文输入法 .......................................... - 136 - 6.1.3 切换中文输入法 .......................................... - 136 - 6.1.4 关闭中文输入法 .......................................... - 137 - 设置 fcitx ........................................................... - 137 - 6.2.1 输入法设置 ................................................ - 137 - 6.2.2 全局设置................................................... - 138 - 第 7 章 桌面应用程序 ........................................................ - 140 - 办公 .................................................................. - 140 - 7.1.1 WPS Office .............................................. - 140 - 7.1.2 文档查看器 ................................................ - 142 - 多媒体 ............................................................... - 143 - 工具 .................................................................. - 144 - 7.3.1 科学计算器 ................................................ - 144 - 7.3.2 屏幕截图工具 ............................................. - 144 - 7.3.3 文本编辑器 ................................................ - 145 - 7.3.4 压缩归档工具 ............................................. - 145 - 互联网 ............................................................... - 146 - 7.4.1 互联网通讯程序 .......................................... - 146 - 7.4.2 网页浏览器 ...............................................
Load more

Recommended publications
  • Release 0.11 Todd Gamblin
    Spack Documentation Release 0.11 Todd Gamblin Feb 07, 2018 Basics 1 Feature Overview 3 1.1 Simple package installation.......................................3 1.2 Custom versions & configurations....................................3 1.3 Customize dependencies.........................................4 1.4 Non-destructive installs.........................................4 1.5 Packages can peacefully coexist.....................................4 1.6 Creating packages is easy........................................4 2 Getting Started 7 2.1 Prerequisites...............................................7 2.2 Installation................................................7 2.3 Compiler configuration..........................................9 2.4 Vendor-Specific Compiler Configuration................................ 13 2.5 System Packages............................................. 16 2.6 Utilities Configuration.......................................... 18 2.7 GPG Signing............................................... 20 2.8 Spack on Cray.............................................. 21 3 Basic Usage 25 3.1 Listing available packages........................................ 25 3.2 Installing and uninstalling........................................ 42 3.3 Seeing installed packages........................................ 44 3.4 Specs & dependencies.......................................... 46 3.5 Virtual dependencies........................................... 50 3.6 Extensions & Python support...................................... 53 3.7 Filesystem requirements........................................
    [Show full text]
  • 1 Australian Synchrotron
    EPICS Qt Update Paul Martin 1 Australian Synchrotron • 3GeV, 216m circumference synchrotron • 8 Beamlines • 12 Software Engineers • IMBL – Worlds Widest Beam - MRT Clinical Program – Safety Critical • Melbourne, Australia • Nearest other facilities: Taiwan, Thailand, Japan • 16th Most Urbanized Country • World’s most livable cities • Hosting ICALEPCS in 2015 2 Qt • Qt is a cross-platform application and UI framework for developers using C++ – Windows,OS X, Linux, Embedded Linux, Android, iOS, vxWorks, Win CE, Amiga OS • Open Source (LPGL v2.1) Qt Designer • Trolltech -> Nokia -> Digia, • Development tools: Qt Creator, Qt Designer, Qmake, Qt Linguist, Qt Assistant, Integration into Visual Studio • Rich set of Widgets and other classes (1000+), Qwt (125+) • Very Good Documentation, help, examples • All Qt Objects contain powerful object communication Qt Creator mechanism (Signal+Slots) • GUI Layout widgets • Qt Project: www.qt-project.org 3 EPICS Qt – Team • Started 2009 – Anthony Owen, Andrew Rhyder, Glenn Jackson • Joined 2011 – Andy Starritt • Joined 2012 – Ricardo Fernandez • Joined 2013 – Zai Wang (1 year contract) 4 EPICS Qt – Rapid GUI Development • Adds Channel Access to standard Qt Widgets and Data Classes • Rapid GUI Dev – Drag and Drop EPICS aware components in Qt Designer • Macro Substitutions for PV names and other GUI functions Qt Designer Channel Access running at design time .ui file – presented using QEGui on any platform (windows / linux) 5 EPICS Qt – Other App Types QCaString Qt Creator QCaInteger QCaFloating QCaByteArray
    [Show full text]
  • Pyqwt Documentation Release 5.2.1
    PyQwt Documentation Release 5.2.1 Gerard Vermeulen July 18, 2010 CONTENTS 1 Introduction 1 1.1 NumPy................................................1 1.2 Qwt..................................................2 1.3 PyQwt with NumPy.........................................2 1.4 Getting help.............................................4 2 Installation 5 2.1 Source Code Installation.......................................5 3 PyQwt Reference Guide 9 3.1 PyQt4.Qwt5 ............................................9 3.2 PyQt4.Qwt5.qplt ........................................ 16 3.3 PyQt4.Qwt5.grace ....................................... 18 4 Copyright 19 5 Indices and Tables 21 Python Module Index 23 Index 25 i ii CHAPTER ONE INTRODUCTION PyQwt is a set of Python bindings for the Qwt library featuring fast plotting of Python lists and tuples and the powerful multi-dimensional arrays provided by NumPy, the fundamental package for efficient scientific and engi- neering computing in Python. 1 1.1 NumPy The NumPy package extends Python with multi-dimensional arrays and a complete set of ‘standard’ functions and operators to manipulate the arrays. NumPy turns Python into is an ideal language experimental numerical and scientific computing (as powerful as APL, MatLab, IDL and others, but much more elegant). If you do not have a mathematical background, you can think of a 1-dimensional array as a column in a spread- sheet. The spreadsheet lets you change whole columns element by element in one single statement. In a similar way, NumPy lets you change whole arrays element by element in one single statement as illustrated by the fol- lowing snippet: >>> import numpy as np >>> x= np.arange(0.0, 10.0, 3.0) >>> y= np.sin(x) >>> x array([ 0., 3., 6., 9.]) >>> y array([ 0.
    [Show full text]
  • Vysoke´Ucˇenítechnicke´V Brneˇ
    VYSOKE´ UCˇ ENI´ TECHNICKE´ V BRNEˇ BRNO UNIVERSITY OF TECHNOLOGY FAKULTA INFORMACˇ NI´CH TECHNOLOGII´ U´ STAV INTELIGENTNI´CH SYSTE´ MU˚ FACULTY OF INFORMATION TECHNOLOGY DEPARTMENT OF INTELLIGENT SYSTEMS BEZDRA´TOVA´ SENZOROVA´ SI´Tˇ SESTAVENA´ Z KOMPONENT ARDUINO DIPLOMOVA´ PRA´ CE MASTER’S THESIS AUTOR PRA´ CE Bc. JAKUB Sˇ PLI´CHAL AUTHOR BRNO 2012 VYSOKE´ UCˇ ENI´ TECHNICKE´ V BRNEˇ BRNO UNIVERSITY OF TECHNOLOGY FAKULTA INFORMACˇ NI´CH TECHNOLOGII´ U´ STAV INTELIGENTNI´CH SYSTE´ MU˚ FACULTY OF INFORMATION TECHNOLOGY DEPARTMENT OF INTELLIGENT SYSTEMS BEZDRA´TOVA´ SENZOROVA´ SI´Tˇ SESTAVENA´ Z KOMPONENT ARDUINO WIRELESS SENSOR NETWORK WITH ARDUINO COMPONENTS DIPLOMOVA´ PRA´ CE MASTER’S THESIS AUTOR PRA´ CE Bc. JAKUB Sˇ PLI´CHAL AUTHOR VEDOUCI´ PRA´ CE Ing. JAN SAMEK, Ph.D. SUPERVISOR BRNO 2012 Abstrakt Diplomova´pra´ce se zaby´va´vytvorˇenı´m bezdra´tove´senzorove´sı´teˇsestavene´z komponent Arduino. Pra´ce obsahuje sezna´menı´s platformou Arduino a jejı´mi mozˇnostmi v kombinaci s bezdra´tovy´mi moduly XBee. Du˚lezˇitou cˇa´stı´pra´ce je na´vrh bezdra´tove´sı´teˇz teˇchto komponent a aplikace pro zobrazenı´nameˇrˇeny´ch hodnot ze senzorovy´ch uzlu˚. Cı´lem pra´ce je vytvorˇenı´senzorove´sı´teˇs dyna- mickou topologiı´a prozkouma´nı´jejı´ho chova´nı´v rea´lne´m prostrˇedı´a vytvorˇenı´aplikace pro ulozˇenı´ a zobrazenı´nameˇrˇeny´ch dat z jednotlivy´ch senzorovy´ch uzlu˚. Abstract This thesis deals with the creation of wireless sensor networks consisting of components Arduino. The work includes introduction to the Arduino platform and its capabilities in combination with the wireless XBee modules.
    [Show full text]
  • Hard Real Time Quick EXAFS Data Acquisition with All Open Source Software on a Commodity Personal Computer Brookhaven National L
    BNL-79366-2007-CP Hard Real Time Quick EXAFS Data Acquisition With All Open Source Software On A Commodity Personal Computer I. So, D.P. Siddons, W.A. Caliebe and S. Khalid Proceedings of Synchrotron Radiation Instrumentation (SRI 2007) Baton Rouge, LA / April 25 - 27, 2007 October 2007 National Synchrotron Light Source Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 www.bnl.gov Notice: This manuscript has been authored by employees of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The publisher by accepting the manuscript for publication acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. This preprint is intended for publication in a journal or proceedings. Since changes may be made before publication, it may not be cited or reproduced without the author’s permission. BNL-79366-2007-CP DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or any third party’s use or the results of such use of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]
  • Qwt User's Guide
    Qwt User’s Guide 5.2.1 Generated by Doxygen 1.6.3 Sun Apr 11 11:55:10 2010 CONTENTS i Contents 1 Qwt - Qt Widgets for Technical Applications1 1.1 License............................................1 1.2 Platforms...........................................1 1.3 Screenshots..........................................1 1.4 Downloads..........................................1 1.5 Installation..........................................2 1.6 Support............................................2 1.7 Related Projects........................................2 1.8 Language Bindings......................................2 1.9 Donations...........................................2 1.10 Credits:............................................2 2 Qwt License, Version 1.03 3 INSTALL 11 4 Curve Plots 14 5 Scatter Plot 14 6 Spectrogram, Contour Plot 14 7 Histogram 14 8 Dials, Compasses, Knobs, Wheels, Sliders, Thermos 14 9 Deprecated List 14 10 Class Index 14 10.1 Class Hierarchy........................................ 14 11 Class Index 17 11.1 Class List........................................... 17 12 Class Documentation 20 12.1 QwtEventPattern::KeyPattern Class Reference........................ 20 12.1.1 Detailed Description................................. 21 12.2 QwtEventPattern::MousePattern Class Reference...................... 21 12.2.1 Detailed Description................................. 21 12.3 QwtAbstractScale Class Reference.............................. 21 Generated on Sun Apr 11 11:55:09 2010 for Qwt User’s Guide by Doxygen CONTENTS ii 12.3.1 Detailed
    [Show full text]
  • Sviluppo Di Un Modulo Di Visualizzazione, Memorizzazione E Analisi Dati in Real-Time Con Elevato Parallelismo
    ALMA MATER STUDIORUM – UNIVERSITA` DI BOLOGNA CAMPUS DI CESENA Scuola di Scienze Corso di Laurea in Ingegneria e Scienze Informatiche SVILUPPO DI UN MODULO DI VISUALIZZAZIONE, MEMORIZZAZIONE E ANALISI DATI IN REAL-TIME CON ELEVATO PARALLELISMO Relazione finale in PROGRAMMAZIONE AD OGGETTI Relatore Presentata da Prof. MIRKO VIROLI BAJRAM HUSHI Seconda Sessione di Laurea Anno Accademico 2014 – 2015 PAROLE CHIAVE Elements Elettrofisiologia Acquisizione Real Time Analisi in Real Time High Throughput Data Indice Introduzione ix 1 Elements s.r.l. 1 1.1 Chi `eElements . 1 1.2 Descrizione dispositivi . 1 1.3 Caratteristiche dei dispositivi . 2 1.3.1 Protocolli di tensione . 3 1.3.2 Connessione al PC . 3 1.4 Applicazioni in Elettrofisiologia . 3 1.4.1 I canali ionici [1] . 4 2 Tecnologie utilizzate 5 2.1 USB . 5 2.1.1 Descrizione USB . 5 2.1.2 Funzionamento USB 2.0 . 7 2.2 Framework QT . 8 2.3 FTDI . 9 2.4 EEPROM . 9 2.5 Repository . 9 3 Analisi Dei Requisiti 11 3.1 Descrizione del Sistema . 11 3.1.1 Prospettiva del Sistema . 11 3.1.2 Funzionalit`aPrincipali . 11 3.1.3 Requisiti richiesti dall'azienda . 12 3.1.4 Utente Finale . 12 3.1.5 Ambiente d'uso e Limitazioni . 12 3.1.6 Linguaggio e piattaforma di sviluppo . 13 3.2 Interfacciamento con l'esterno . 13 3.2.1 Interfaccia utente . 13 3.2.2 Interfaccia Hardware . 13 3.2.3 Interfaccia software . 13 v vi INDICE 3.3 Suddivisione in moduli . 14 3.3.1 Riconoscimento Dispositivi . 14 3.3.2 Acquisizione dati .
    [Show full text]
  • Visualizing Physiological Signals in Real-Time
    182 PROC. OF THE 14th PYTHON IN SCIENCE CONF. (SCIPY 2015) Visualizing physiological signals in real-time Sebastián Sepúlveda‡∗, Pablo Reyes‡, Alejandro Weinstein‡ https://www.youtube.com/watch?v=6WxkOeTuX7w F Abstract—This article presents an open-source Python software package, on the multiprocessing Python standard library. This allows having dubbed RTGraph, to visualize, process and record physiological signals (electro- concurrent processes for receiving, processing, and displaying the cardiography, electromyography, etc.) in real-time. RTGraph has a multiprocess data. Signal processing tasks, such as spectral estimation, are architecture. This allows RTGraph to take advantage of multiple cores and to based on the SciPy/NumPy stack [Ste11]. This architecture makes be able to handle data rates typically encountered during the acquisition and it possible to ensure that no data is lost and that the user interface processing of biomedical signals. It also allows RTGraph to have a clean separa- has a fast response. tion between the communication and visualization code. The paper presents the architecture and some programming details of RTGraph. It also includes three examples where RTGraph was adapted to work with (i) signals from a Inertial Software architecture Measurement Unit (IMU) in the context of a biomechanical experiment; (ii) The applications described in this article can be classified as a electromyography signals to estimate muscle fatigue; and (iii) pressure signals "data logger". A data logger needs to acquire a stream of data, from a device used to monitor nutrition disorders in premature infants. add a time stamp to the data (if required), and export the time- stamped data to a file in a known file format, such as comma Index Terms—real-time processing, visualization, signal processing separated value (CSV) format.
    [Show full text]
  • Technical Notes All Changes in Fedora 13
    Fedora 13 Technical Notes All changes in Fedora 13 Edited by The Fedora Docs Team Copyright © 2010 Red Hat, Inc. and others. The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. The original authors of this document, and Red Hat, designate the Fedora Project as the "Attribution Party" for purposes of CC-BY-SA. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version. Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law. Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries. For guidelines on the permitted uses of the Fedora trademarks, refer to https:// fedoraproject.org/wiki/Legal:Trademark_guidelines. Linux® is the registered trademark of Linus Torvalds in the United States and other countries. Java® is a registered trademark of Oracle and/or its affiliates. XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their respective owners. Abstract This document lists all changed packages between Fedora 12 and Fedora 13.
    [Show full text]
  • 1. Why POCS.Key
    Symptoms of Complexity Prof. George Candea School of Computer & Communication Sciences Building Bridges A RTlClES A COMPUTER SCIENCE PERSPECTIVE OF BRIDGE DESIGN What kinds of lessonsdoes a classical engineering discipline like bridge design have for an emerging engineering discipline like computer systems Observation design?Case-study editors Alfred Spector and David Gifford consider the • insight and experienceof bridge designer Gerard Fox to find out how strong the parallels are. • bridges are normally on-time, on-budget, and don’t fall ALFRED SPECTORand DAVID GIFFORD • software projects rarely ship on-time, are often over- AS Gerry, let’s begin with an overview of THE DESIGN PROCESS bridges. AS What is the procedure for designing and con- GF In the United States, most highway bridges are budget, and rarely work exactly as specified structing a bridge? mandated by a government agency. The great major- GF It breaks down into three phases: the prelimi- ity are small bridges (with spans of less than 150 nay design phase, the main design phase, and the feet) and are part of the public highway system. construction phase. For larger bridges, several alter- There are fewer large bridges, having spans of 600 native designs are usually considered during the Blueprints for bridges must be approved... feet or more, that carry roads over bodies of water, preliminary design phase, whereas simple calcula- • gorges, or other large obstacles. There are also a tions or experience usually suffices in determining small number of superlarge bridges with spans ap- the appropriate design for small bridges. There are a proaching a mile, like the Verrazzano Narrows lot more factors to take into account with a large Bridge in New Yor:k.
    [Show full text]
  • Design and Implementation of a Graphical User Interface for the Flexible, Extensible Radar and Sonar Simulator
    Design and Implementation of a Graphical User Interface for the Flexible, Extensible Radar and Sonar Simulator Prepared by: Poovendren Govender A dissertation submitted to the Department of Electrical Engineering, University of Cape Town, in fulfillment of the requirements for the degree of Bachelor of Science in Engineering 21 October 2008 Supervisor: Yoann Paichard Abstract This project describes the design, implementation and testing of a Graphical User Inter- face for the Flexible Extensible Radar Simulator which was developed by the RRSG at UCT. Prior to the actual design and implementation, research relevant to the GUI development needed to be examined. Research included a basic understanding of radar systems, the FERS simulator and an already existing graphical radar simulator, Sarsim2. The software tools used to complete this project included Qt, OpenGL and QWT. The design phase involved determining the functionality of the GUI and separating the GUI into smaller manageable components. These were the main window, pulse compres- sions, 3D visualization and 2D graphs of results. This allowed for modular design of the GUI. The implementation phase involved realizing the functionality set out in the design phase by using the software tools and relevant research. Once implementation was complete the testing of the GUI was carried out. Any inconsis- tencies found at this stage were either corrected or included as future work. The GUI created utilizes the FERS simulator to model both bistatic and monostatic radars and a maximum of 6 isotropic targets. The radar platforms and targets are displayed on a 3D plot created with OpenGL. The user is able to rotate, zoom and move the 3D coordinate system.
    [Show full text]
  • Include Dll in Qt Creator
    Include dll in qt creator click here to download add method calc in mylibrary; build www.doorway.ru 3 use www.doorway.ru www.doorway.ru Project created by QtCreator T I have www.doorway.ru file and also a www.doorway.ru file of the same name. Tell me - do you just include the library in www.doorway.ru file? If you run the application from Qt Creator, it seems to be able to locate the DLL itself (if it's in the. In addition to Qt libraries, you can add other libraries to your projects. The way the library is added depends on the type and location of the library. You can add a. I've followed the steps described in www.doorway.ru but, somehow I still get undefined reference errors. This is what I did. I put this dll and the header in a DLL directory located on C: I changed the The. cpp: Qt Code: Switch view. #include "Functions.h". void test(). In Windows we have DLLs, in Linux/Unix we have shared libraries. We'll need at least two projects in Qt Creator; one will be the shared library, the path for QMake to depend on when linking against the libraries in there. "www.doorway.ru" is a project file created in Qt Creator which contains "thirdparty/ dcmtk" contains pre-compiled lib, dll and include headers. Yesterday I installed the latest version of the Qt SDK on my home machine ( selecting only the desktop version for MinGW in the installation). Open QtCreator and configure git: Tools->Options-> Version Control -> Git.
    [Show full text]