DOCSLIB.ORG

Fairplex Brochure

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fairplex Brochure F A I R P L E X LAMINATE COLLECTION DMI Office Furniture 9780 Ormsby Station Road Ste 2000 Louisville, KY 40223 502.426.4351 (Fax) 502.429.6285 www.dmiofficefurniture.com 7 0 0 4 7 0 0 5 7 0 0 6 Mocha Cognac Cherry Mahogany Finish Finish Finish Pub. No. KBG-VI-06-10-10M FAIRPLEX LAMINATE COLLECTION 7004 / 7005 / 7006 FILE/FILE PEDESTAL CREDENZA SHELL 7004/7005/7006-832 2 7004/7005/7006-825 RECEPTION DESK SHELL W15.5 D22 H28 15 W71 D23.6 H29 7004/7005/7006-122 ALSO AVAILABLE: W71 D36 H41 ALSO AVAILABLE: F I L E / F I L E PEDESTAL C R E D E N Z A SHELL 7004/7005/7006-840 7004/7005/7006-925 W15.5 D18 H28 W66 D23.6 H29 • -840 for use with the -224 return. C R E D E N Z A SHELL • Ships set-up. 7004/7005/7006-926 • Locking pedestal. W60 D23.6 H29 RECEPTION RETURN 7004/7005/7006-124 W42 D22.6 H40 FILE/FILE PEDESTAL 7004/7005/7006-838 CORNER CREDENZA RECEPTION RETURN RISER W15.5 D22.25 H20.75 7004/7005/7006-125 7004/7005/7006-621 ALSO AVAILABLE: W60 D12 H1 W71 D35.5 H29 F I L E / F I L E PEDESTAL • For use in right U applications. 7004/7005/7006-839 ALSO AVAILABLE: W15 D18.5 H20.75 C O R N E R CREDENZA • Use the -838 with desk, credenza and return shells except for the -224 return shell. 7004/7005/7006-622 BOX/BOX/FILE PEDESTAL W71 D35.5 H29 • Ships set-up. 7004/7005/7006-831 • Locking pedestal. • For use in left U applications. W15.5 D22 H28 • Ships set-up. • Locking pedestal. PERSONAL FILE PEDESTAL RETURN 7005/7006-327 7004/7005/7006-824 W30 D22 H28 W47.25 D23.6 H29 • Box / box / personal file / lateral file drawer. ALSO AVAILABLE: • Ships set-up. R E T U R N • Locking drawers. 7004/7005/7006-924 W42 D23.6 H29 R E T U R N 7004/7005/7006-224 W42 D19.6 H29 R E T U R N 7004/7005/7006-324 W35.5 D23.6 H29 BRIDGE 7004/ 7005/7006-823 W47.25 D23.6 H29 ALSO AVAILABLE: B R I D G E Construction - Fairplex is constructed of 3-ply Function - Box drawers have a 50 lb. load 7004/7005/7006-923 balanced panels with camlock fasteners, wood bearing rating; file drawers have a 75 lb. load W42 D23.6 H29 dowels, screws and glue. All top surfaces are 1" bearing rating; lateral file drawers have a 100 lb B R I D G E thick consisting of 28mm thick thermally fused load bearing rating. File drawers are equipped 7004/7005/7006-623 laminate on 3-ply balanced panels and 3mm PVC with a metal filing system to accept letter or legal W35 D23.6 H29 reed shaped edges. size hanging files. All pedestals and the lateral B R I D G E file have a front mounted lock with central 7004/7005/7006-523 locking. All cases are equipped with levelers to W30 D23.6 H29 adjust for less than even flooring. The name says it all! A fair price for a very flexible, durable contemporary FAIRPLEX product. This a great value for any small or starting entrepreneur that is LAMINATE COLLECTION 7004 / 7005 / 7006 looking to grow and expand. The simple design with reeded edges in three colors, Mocha, Cognac Cherry and Mahogany, can fit any budget and any office solution. The flat panel design allows the user to fit product into corners and against walls thereby saving space. With over a hundred SKUs, this complete offering has plenty of options - including Reception stations - to fit the user’s current and future needs. 14 3 INDIVIDUAL COMPONENTS/SHELLS CORNER DESK SHELL BULLET DESK SHELL 7004/7005/7006-330 7004/7005/7006-620 W42 D42 H29 BOW TOP DESK SHELL W71 D35.5 H29 7004/7005/7006-822 BULLET SUPPORT POST W71 D41.2 H29 7004/7005/7006-630 W2.5 D2.5 H28 CORNER PENINSULA/BULLET DESK 7004/7005/7006-221 W71 D42 H29 D E S K S H E L L 7004/7005/7006-821 • Accommodates left return or credenza. BOW FRONT CORNER DESK W71 D35.5 H29 ALSO AVAILABLE: 7004/7005/7006-321 CORNER PENINSULA/BULLET DESK ALSO AVAILABLE: W71 D48 H29 D E S K SHELL 7004/7005/7006-222 • Accommodates left return or credenza. 7004/7005/7006-921 W71 D42 H29 W66 D30 H29 ALSO AVAILABLE: • Accommodates right return or credenza. B O W FRONT CORNER DESK D E S K SHELL CORNER PENINSULA/BULLET 7004/7005/7006-322 7004/7005/7006-121 D E S K B A S E W71 D48 H29 W60 D30 H29 7004/7005/7006-230 • Accommodates right return or credenza. D E S K SHELL W2.5 D2.5 H28 7004/7005/7006-421 W47.25 D30 H29 UNLESS NOTED, ALL ITEMS ARE SHIPPED FLAT PACKED FAIRPLEX LAMINATE COLLECTION 7004 / 7005 / 7006 BOOKCASE 7004/7005/7006-828 4 W35.5 D15 H42 13 BOOKCASE KITS 7004/7005/7006-829 EXECUTIVE DESK W I T H 3 / 4 P E D S W35.5 D15 H65 7004/7005/7006-36Q W71 D35.5 H29 Consists of: -821 Desk Shell, W71 x D35.5 TWO DRAWER SALES DESK EXECUTIVE BOW FRONT DESK 7004/7005/7006-3435 (R/L) -838 B/F 3/4 Pedestal 47” ROUND CONFERENCE TABLE 7004/7005/7006-37 -838 B/F 3/4 Pedestal W71 D35.5 H29 7004/7005/7006-721 W71 D41.2 H29 Consists of: ALSO AVAILABLE: W47 D47 H29 Consists of: -620 Executive Bullet Desk Shell, W71 x D35.5 E X E C U T I V E DESK WITH 3 / 4 PEDS -822 Bow Top Desk Shell, W71 x D41.2 -630 Bullet Support Post ALSO AVAILABLE: 7004/7005/7006-31Q -831 B/B/F Pedestal -832 F/F Pedestal 4 2 ” ROUND CONFERENCE TABLE -832 F/F Pedestal W66 D30 H29 • Pedestals ship set-up. 7004/7005/7006-726 Consists of: • Pedestals ship set-up. W42 D42 H29 -921 Desk Shell, W66 x D30 -838 B/F 3/4 Pedestal -838 B/F 3/4 Pedestal J U N I O R EXECUTIVE DESK W I T H 3 / 4 PEDS 7004/7005/7006-30Q EXECUTIVE KNEEHOLE CREDENZA E N D TA B L E EXECUTIVE BOW FRONT DESK 8 ’ R A C E T R A C K W60 D30 H29 7004/7005/7006-21 10’ RACETRACK WITH 3/4 PEDS C O N F E R E N C E TA B L E 7004/7005/7006-131 Consists of: W71 D23.6 H29 C O N F E R E N C E TA B L E W24 D24 H20 7004/7005/7006-37Q 7004/7005/7006-723 -121 Desk Shell, W60 x D30 Consists of: 7004/7005/7006-728 W71 D41.2 H29 W95 D42 H29 -838 B/F 3/4 Pedestal -825 Credenza Shell, W71 x D23.6 W120 D48 H29 Consists of: -838 B/F 3/4 Pedestal -831 B/B/F Pedestal ALSO AVAILABLE: -822 Bow Top Desk Shell, W71 x D41.2 120” RACETRACK STRETCHER • Pedestals ship set-up. -831 B/B/F Pedestal -838 B/F 3/4 Pedestal 6 ’ RACETRACK 7004/7005/7006-729 -838 B/F 3/4 Pedestal ALSO AVAILABLE: CONFERENCE TABLE KEYBOARD SLIDE K N E E H O L E CREDENZA 7004/7005/7006-720 7004/7005/7006-510 • Pedestals ship set-up. 7004/7005/7006-19 W71 D35 H29 W26 D10 H1 W66 D23.6 H29 Consists of: E X E C U T I V E D E S K -925 Credenza Shell, W66 x D23.6 7004/7005/7006-36 THREE DRAWER SALES DESK -831 B/B/F Pedestal W71 D35.5 H29 7004/7005/7006-3233 (R/L) -831 B/B/F Pedestal CLOTH TACK BOARD Consists of: W71 D35.5 H29 K N E E H O L E CREDENZA 0000-101 -821 Desk Shell, W71 x D35.5 Consists of: 7004/7005/7006-18 W68 D1.5 H18 -831 B/B/F Pedestal -620 Executive Bullet Desk Shell, W71 x D35.5 W60 D23.6 H29 ALSO AVAILABLE: -832 F/F Pedestal -630 Bullet Support Post Consists of: C L O T H TACK BOARD ALSO AVAILABLE: -831 B/B/F Pedestal -926 Credenza Shell, W60 x D23.6 0000-102 E X E C U T I V E DESK • Pedestals ship set-up. -831 B/B/F Pedestal W63 D1.5 H18 7004/7005/7006-31 -831 B/B/F Pedestal C L O T H TACK BOARD W66 D30 H29 • Pedestals ship set-up. Consists of: 0000-103 -921 Desk Shell, W66 x D30 W44.5 D1.5 H18 -831 B/B/F Pedestal • Use the -101 with -426, -427, -428. -832 F/F Pedestal • Use the -102 with the -927, -928. • Use the -103 with the -326. J U N I O R EXECUTIVE DESK THREE DRAWER SALES DESK 7004/7005/7006-30 WITH 3/4 PED W60 D30 H29 EXECUTIVE KNEEHOLE CREDENZA 7004/7005/7006-3233Q (R/L) WITH 3/4 PEDS Consists of: W71 D35.5 H29 7004/7005/7006-21Q -121 Desk Shell, W60 x D30 Consists of: W71 D23.6 H29 -831 B/B/F Pedestal -620 Executive Bullet Desk Shell, W71 x D35.5 -832 F/F Pedestal -630 Bullet Support Post Consists of: -838 B/F 3/4 Pedestal -825 Credenza Shell, W71 x D23.6 • Pedestals ship set-up.
Load more

Recommended publications
  • Installation and User Manual
    Installation and user manual EN CLOSED WOOD FIRES DON’T COMPROMISE. Product Kalfire W Product group Wood burning fireplaces with lifting door Application Open and closed Models Kalfire W45/48F Kalfire W60/51F Kalfire W65/38C Kalfire W66/48S Kalfire W70/33F Kalfire W71/62F Kalfire W80/52T Kalfire W85/40F Kalfire W90/47C Kalfire W90/47S Kalfire W100/61F Kalfire W105/47F Kalfire W105/47T Kalfire W120/38F Version January 2018 Language English 3 4 Preface Congratulations on purchasing your Kalfire W wood burning fireplace. This manual describes the installation, daily use and maintenance of all the fireplaces from the Kalfire W series. Read this manual carefully before installing and using the fireplace. Please complete the proof of guarantee (appendix C) and keep it with the invoice to verify the purchase date. Always keep this manual close to your fireplace An authorised installer will install the Kalfire W fireplace in compliance with the national or local applicable regulations. Check the fireplace for transport damage upon delivery. Report any transport damage to the supplier immediately. The supplier cannot be held responsible for any damage because of faulty installation. In case any problems occur or if you have any questions concerning the operation of your fireplace, please contact your Kalfire dealer. Your dealer is also the person to contact during the duration of the guarantee period. Kalfire BV has installed a telephone helpdesk, to support the technical department of her dealers, to make sure your dealer will be able to advise you in a professional way. All rights reserved. Nothing from this manual may be copied, distributed or translated into other languages, partly or wholly, without prior written permission from Kalfire.
    [Show full text]
  • Heater Element Specifications Bulletin Number 592
    Technical Data Heater Element Specifications Bulletin Number 592 Topic Page Description 2 Heater Element Selection Procedure 2 Index to Heater Element Selection Tables 5 Heater Element Selection Tables 6 Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Description Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system. Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details. You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. For Application on Bulletin 100/500/609/1200 Line Starters Heater Element Specifications Eutectic Alloy Overload Relay Heater Elements Type J — CLASS 10 Type P — CLASS 20 (Bul. 600 ONLY) Type W — CLASS 20 Type WL — CLASS 30 Note: Heater Element Type W/WL does not currently meet the material Type W Heater Elements restrictions related to EU ROHS Description The following is for motors rated for Continuous Duty: For motors with marked service factor of not less than 1.15, or Overload Relay Class Designation motors with a marked temperature rise not over +40 °C United States Industry Standards (NEMA ICS 2 Part 4) designate an (+104 °F), apply application rules 1 through 3. Apply application overload relay by a class number indicating the maximum time in rules 2 and 3 when the temperature difference does not exceed seconds at which it will trip when carrying a current equal to 600 +10 °C (+18 °F).
    [Show full text]
  • EUROPE RECEPTION T: +1 905-338-0000/ +1 888-901-3090 E: [email protected] CANADIAN DEALERSHIP PRICE 2020 Gvainteriors.Com PRICES ARE in CANADIAN DOLLARS
    GVA Interiors, Inc. PRICELIST 2771 Bristol Circle, Oakville, Ontario L6H 6X5 Canada EUROPE RECEPTION T: +1 905-338-0000/ +1 888-901-3090 E: [email protected] CANADIAN DEALERSHIP PRICE 2020 gvainteriors.com PRICES ARE IN CANADIAN DOLLARS CONFIDENTIAL E: [email protected] gvainteriors.com EUROPE RECEPTION *** RECEPTION HEIGHT 1162 MM / 45.7" *** LASEREDGE BANDING TECHNOLOGY *** STRAIGHT LINE INTERMEDIATE RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE TOP COVER WITHOUT CUT W47.2"D29.6"H45.7" W1200 D752 H1162 193900 $ 1,151.13 a TOP CUTOUT COVER W47.2"D29.6"H45.7" W1200 D752 H1162 193904 $ 1,170.84 a ANGULAR INTERMEDIATE RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W47.2"D29.6"H45.7" W1200 D752 H1162 193970 $ 1,025.91 W55.1" D29.6" H45.7" W1400 D752 H1162 193972 $ 1,214.63 a TOP COVER WITHOUT CUT W47.2"D29.6"H45.7" W1200 D752 H1162 193971 $ 1,025.94 W55.1" D29.6" H45.7" W1400 D752 H1162 193973 $ 1,214.63 a DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W47.2" D29.6" H45.7" W1200 D752 H1162 193974 $ 1,041.79 W55.1" D29.6" H45.7" W1400 D752 H1162 193976 $ 1,232.69 a TOP CUTOUT COVER W47.2" D29.6" H45.7" W1200 D752 H1162 193975 $ 1,041.79 W55.1" D29.6" H45.7" W1400 D752 H1162 193977 $ 1,232.69 a STRAIGHT LINE END PART RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W63" D29.6" H45.7" W1600 D752 H1162 193910 $ 1,457.05 W71" D29.6" H45.7" W1800 D752 H1162 193912 $ 1,614.87 a TOP COVER WITHOUT CUT W63" D29.6" H45.7" W1600 D752 H1162 193911 $ 1,457.05 W71" D29.6" H45.7" W1800 D752 H1162 193913 $ 1,614.87 a DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W63" D29.6" H45.7" W1600 D752 H1162 193914 $ 1,477.80 a W71" D29.6" H45.7" W1800 D752 H1162 193916 $ 1,638.04 TOP CUTOUT COVER W63" D29.6" H45.7" W1600 D752 H1162 193915 $ 1,477.80 W71" D29.6" H45.7" W1800 D752 H1162 193917 $ 1,638.04 a GVA Interiors, Inc.
    [Show full text]
  • BU97530KVT MAX 445 Segment(89Segx5com)
    Datasheet LCD Segment Drivers Multi-function LCD Segment Drivers BU97530KVT MAX 445 Segment(89SEGx5COM) General Description Key Specifications The BU97530KVT is 1/5, 1/4, 1/3 duty or Static ■ Supply Voltage Range: +2.7V to +6.0V General-purpose LCD driver. The BU97530KVT can ■ Operating Temperature Range: -40°C to +85°C drive up to 445 LCD Segments directly. The ■ Max Segments: 445 Segments BU97530KVT can also control up to 9 General-purpose ■ Display Duty Static, 1/3, 1/4, 1/5 Selectable output pins / 9 PWM output pins. ■ Bias: 1/2, 1/3 Selectable These products also incorporate a key scan circuit that ■ Interface: 3wire Serial Interface accepts input from up to 30 keys to reduce printed circuit board wring. Features Package W (Typ) x D (Typ) x H (Max) Key Input Function for up to 30 Keys (A key scan is performed only when a key is pressed.) Either 1/5, 1/4, 1/3 Duty or Static Can be Selected with the Serial Control Data. 1/5 Duty Drive: Up to 445 Segments can be Driven 1/4 Duty Drive: Up to 360 Segments can be Driven 1/3 Duty Drive: Up to 270 Segments can be Driven Static Drive: Up to 90 Segments can be Driven Selectable Display Frame Frequency for Common and Segment Output Waveforms. Configurable Output Pin to Segment Output / PWM Output / General-purpose Output.(Max 9 Pins) Built-in OSC Circuit TQFP100V Integrated Voltage Detection Type Reset Circuit 16.00mm x 16.00mm x 1.20mm (VDET) No External Component Low Power Consumption Design Supports Line and Frame Inversion Applications Car Audio, Home Electrical Appliance, Meter Equipment etc.
    [Show full text]
  • Experience a Lower Total Cost of Ownership
    EXPERIENCE A LOWER TOTAL COST OF OWNERSHIP Timken® Spherical Roller Bearings are engineered to give you more of what you need. Lower Operating Temperatures Rollers are guided by cage pockets—not a center guide ring—eliminating a friction point and resulting in 4–10% less rotational torque and 5ºC lower operating temperatures.* Less rotational torque leads to improved efficiency, lower energy consumption and more savings. Lower temperatures reduce the oil oxidation rate by 50% to extend lubricant life. Tougher Protection Hardened steel cages deliver greater fatigue strength, increased wear resistance and tougher protection against shock and acceleration. Optimized Uptime Unique slots in the cage face improve oil flow and purge more contaminants from the bearing to help extend equipment uptime. Minimized Wear Improved profiles reduce internal stresses and optimize load distribution to minimize wear. Improved Lube Film Enhanced surface finishes avoid metal-to-metal contact to reduce friction and result in improved lube film. Higher Loads Longer rollers result in 4–8% higher load ratings or 14–29% longer predicted bearing life. Higher load ratings enable you to carry heavier loads. Brass Cages Available in all sizes; ready when you need extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces, and minimal lubrication. Increase your operational efficiencies and extend maintenance intervals. Starting now. Visit Timken.com/spherical to find out more. *All results are from head-to-head
    [Show full text]
  • Influencer Poll: Likelihood to Recommend & Support
    Wave 56 Influencer Poll Update January 2018 Public Release Influencer Poll: Likelihood to Recommend & Support 1 Likelihood to Recommend and Support Military Service Likelihood to Recommend and Support Military Service 80% 71% 70% 71% 70% 66% 66% 66% 67% 63% 63% 63% 64% 61% 63% 60% 50% 46% 47% 47% 45% 44% 42% 43% 42% 39% 38% 40% 35% 32% 33% 34% 34% 30% 20% 10% Likely to Recommend: % Likely/Very Likely Likely to Support: % Agree/Strongly Agree Yearly Quarterly 0% Jan–Mar 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Likely to Recommend Military Service Likely to Support Decision to Join § Influencers’ likelihood to support the decision to join the Military increased significantly from 67% in 2015 to 70% in 2016. § However, Influencers’ likelihood to support the decision to join the Military remained stable in January–March 2017. = Significantly change from previous poll Source: Military Ad Tracking Study (Influencer Market) Wave 56 2 Questions: q1a–c: “Suppose [relation] came to you for advice about various post-high school options. How likely is it that you would recommend joining a Military Service such as the Army, Navy, Marine Corps, Air Force, or Coast Guard?” q2ff: “If [relation] told me they were planning to join the Military, I would support their decision.” Likelihood to Recommend Military Service By Influencer Type Likelihood to Recommend Military Service 80% 70% 63% 59% 59% 60% 58% 60% 57% 56% 57% 55% 54% 53% 48% 55% 50% 54% 47% 52% 51% 44% 51% 47% 42% 42% 42% 49% 41% 43% 42% 45% 45% 46% 40% 42% 37% 41% 39% 41% 38% 38% 38% 37% 37% 39% 34% 35% 34% 30% 33% 33% 32% 33% 32% 31% 32% 31% 31% 31% 32% 20% 25% 25% 24% 31% 29% 10% % Likely/Very Likely Yearly Quarterly 0% Jan–Mar 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Fathers Mothers Grandparents Other Influencers § Influencers’ likelihood to recommend military service remained stable in January–March 2017 for all influencer groups.
    [Show full text]
  • BU91530KVT-M : Display Drivers
    Datasheet LCD Segment Drivers Multi-function LCD Segment Drivers BU91530KVT-M MAX 445 Segment(89SEGx5COM) General Description Key Specifications The BU91530KVT-M is 1/5, 1/4, 1/3 or 1/1 duty ■ Supply Voltage Range: +2.7V to +6.0V general-purpose LCD driver that can be used for ■ Operating Temperature Range: -40°C to +85°C frequency display in electronic tuners under the control of ■ Max Segments: 445 Segments a microcontroller. The BU91530KVT-M can drive up to ■ Display Duty 1/1, 1/3, 1/4, 1/5 Selectable 445 LCD Segments directly. The BU91530KVT-M can ■ Bias: 1/2, 1/3 Selectable also control up to 9 general-purpose output ports. ■ Interface: 3wire Serial Interface These products also incorporate a key scan circuit that accepts input from up to 30 keys to reduce printed circuit board wring. Package W (Typ.) x D (Typ.) x H (Max.) Features AEC-Q100 Qualified (Note1) Key input function for up to 30 keys (A key scan is performed only when a key is pressed.) Either 1/5, 1/4, 1/3 or 1/1 duty (static) can be selected with the serial control data. 1/5 duty drive: Up to 445 segments can be driven 1/4 duty drive: Up to 360 segments can be driven 1/3 duty drive: Up to 270 segments can be driven 1/1 duty drive: Up to 90 segments can be driven Serial Data Control of frame frequency for common and segment output waveforms. Serial data control of switching between the segment TQFP100V output port , PWM output port and general-purpose 16.00mm x 16.00mm x 1.20mm output port functions.(Max 9 ports) Built-in OSC circuit Integrated Power-on Reset Circuit No external component Low power consumption design Supports Line and Frame Inversion (Note1) Grade 3 Applications Car Audio, Home Electrical Appliance, Meter Equipment etc.
    [Show full text]
  • Nuclear Weapons: the Reliable Replacement Warhead Program
    Order Code RL32929 CRS Report for Congress Received through the CRS Web Nuclear Weapons: The Reliable Replacement Warhead Program May 24, 2005 Jonathan Medalia Specialist in National Defense Foreign Affairs, Defense, and Trade Division Congressional Research Service ˜ The Library of Congress Nuclear Weapons: The Reliable Replacement Warhead Program Summary Most current U.S. nuclear warheads were built in the 1980s, and are being retained longer than was planned. Yet warheads deteriorate with age, and must be maintained. The current approach monitors them for signs of aging. When problems are found, a Life Extension Program (LEP) rebuilds components. While some can be made to new specifications, a nuclear test moratorium bars that approach for critical components that would require a nuclear test. Instead, LEP rebuilds them as closely as possible to original specifications. Using this approach, the Secretaries of Defense and Energy have certified stockpile safety and reliability for the past nine years without nuclear testing. In the FY2005 Consolidated Appropriations Act, Congress initiated the Reliable Replacement Warhead (RRW) program by providing $9 million for it. The program will study developing replacement components for existing weapons, trading off features important in the Cold War, such as high yield and low weight, to gain features more valuable now, such as lower cost, elimination of some hazardous materials, greater ease of manufacture, greater ease of certification without nuclear testing, and increased long-term confidence in the stockpile. It would modify components to make these improvements; in contrast, LEP makes changes mainly to maintain existing weapons. Representative David Hobson, RRW’s prime sponsor, views it as part of a comprehensive plan for the U.S.
    [Show full text]
  • Schedule of Available Online ANYTIME (Asynchronous) Classes for Fall 2021
    Schedule of Available Online ANYTIME (Asynchronous) Classes for Fall 2021 Course # CRN Title Schedule Type Primary Instructor Start Date End Date Days Meet Begin Time End Time ACC101-W81 33847 INTRO TO FINANCIAL ACCOUNTING Online ANYTIME (Asynchronous) Svarc, Dominique 18-Oct-21 12-Dec-21 ACC102-W80 31425 INTRO TO MANAGERIAL ACCOUNTING Online ANYTIME (Asynchronous) Busto, Lisa 18-Oct-21 12-Dec-21 ACC112-CW8 31433 QUICKBOOKS Online ANYTIME (Asynchronous) Mago, Michael 18-Oct-21 12-Dec-21 ACC155-W80 31434 PAYROLL ACCOUNTING Online ANYTIME (Asynchronous) Pekar, Sharon 18-Oct-21 12-Dec-21 ACC261-W80 32902 TAX RESEARCH Online ANYTIME (Asynchronous) Pekar, Sharon 18-Oct-21 12-Dec-21 ACC281-CW8 32952 CPA REVIEW COURSE/AUD Online ANYTIME (Asynchronous) Wayne, Christine 18-Oct-21 12-Dec-21 ARC117-W80 30826 ARCHITECTURAL CAD II Online ANYTIME (Asynchronous) Dittburner, Carl 18-Oct-21 12-Dec-21 ARC125-W80 30828 CHICAGO'S ARCHITECTURAL HIST Online ANYTIME (Asynchronous) Roth, Thomas 18-Oct-21 12-Dec-21 BIO110-W80 33741 INTRO TO BIOLOGY AND SOCIETY Online ANYTIME (Asynchronous) Barna, Kelly 18-Oct-21 12-Dec-21 BIO136-W80 30571 INTRODUCTION TO HUMAN DISEASE Online ANYTIME (Asynchronous) Cheng, Tong 18-Oct-21 12-Dec-21 CAS125-W80 30282 ACCESS 2019/OFFICE 365 Online ANYTIME (Asynchronous) Schmitz, Kathleen 18-Oct-21 12-Dec-21 CAS205-W01 33039 ADVANCED WORD 2019/OFFICE 365 Online ANYTIME (Asynchronous) Amodeo, Aluana 8-Nov-21 17-Dec-21 CAS215-W01 33043 ADVANCED EXCEL 2019/OFFICE 365 Online ANYTIME (Asynchronous) Merritt, Jennifer 8-Nov-21 17-Dec-21 ECO211-W82
    [Show full text]
  • Nuclear Weapons Databook, Volume I 3 Stockpile
    3 Stockpile Chapter Three USNuclear Stockpile This section describes the 24 types of warheads cur- enriched uranium (oralloy) as its nuclear fissile material rently in the U.S. nuclear stockpile. As of 1983, the total and is considered volatile and unsafe. As a result, its number of warheads was an estimated 26,000. They are nuclear materials and fuzes are kept separately from the made in a wide variety of configurations with over 50 artillery projectile. The W33 can be used in two differ- different modifications and yields. The smallest war- ent yield configurations and requires the assembly and head is the man-portable nuclear land mine, known as insertion of distinct "pits" (nuclear materials cores) with the "Special Atomic Demolition Munition" (SADM). the amount of materials determining a "low" or '4high'' The SADM weighs only 58.5 pounds and has an explo- yield. sive yield (W54) equivalent to as little as 10 tons of TNT, In contrast, the newest of the nuclear warheads is the The largest yield is found in the 165 ton TITAN I1 mis- W80,5 a thermonuclear warhead built for the long-range sile, which carries a four ton nuclear warhead (W53) Air-Launched Cruise Missile (ALCM) and first deployed equal in explosive capability to 9 million tons of TNT, in late 1981. The W80 warhead has a yield equivalent to The nuclear weapons stockpile officially includes 200 kilotons of TNT (more than 20 times greater than the only those nuclear missile reentry vehicles, bombs, artil- W33), weighs about the same as the W33, utilizes the lery projectiles, and atomic demolition munitions that same material (oralloy), and, through improvements in are in "active service."l Active service means those electronics such as fuzing and miniaturization, repre- which are in the custody of the Department of Defense sents close to the limits of technology in building a high and considered "war reserve weapons." Excluded are yield, safe, small warhead.
    [Show full text]
  • DNA1.94Og27.Ool G
    DNA1.94Og27.Ool g No. Pub. Year Citations File Name File Size (bytes) 5 1967-1968 857 RADBIB05.TXT 791,604 The search criteria was for radiation or radiological for publication year greater than 1966 and less than 1969. The document database four character field names and a descriptor for each. field are as follows: ABS Abstract ACCD Accession Date ADNO DTIC Number ---*->*h I AUTH Author (s) CCDE Computer Code ( s ) CLSS Classification CONN Contract Number CORP Corporation DATE Report Date DESC Descriptor (s) EFFT Damage Mechanism EMPF Electro Magnetic Pulse File number(s) HESO High Explosive Shot(s) INUM Item Number LA Country or Language PROJ Project Number REPN Report Number SHOT Nuclear Test (s) SUCE Device Designation SUJO DASIAC Subject number(s) SYMJ Published in SYST System Affected TEMP Document Control number(s) TITL Report Title TNFF Tactical Nuclear Warfare TREE Transient Radiation Effects on Electronics number(s) TSHO Shot. Type Statement A Approved for public release;* Distribution unlirnited.ZMi-d=- .folddata Report Log for Bibliography Report 'bibliography' scheduled as 'radbib' Bibliography using full text searching with selection qualification. STILAS text selection v6.2 started on Monday, June 13, 1994, 10:45 AM Search will use the KUNI database Search strings will be read from standard input The catalog key will be written to standard output 19940613104505 BRS/Search-Engine v.5 started for seltextl 11379 records found for #1: RADIATION OR RADIOLOGICAL 1 searches considered 1 searches selected. STILAS text selection finished on Monday, June 13, 1994, 10:49 AM STILAS catalog selection v6.2 started on Monday, June 13, 1994, 10:45 Ah4 Catalog key will be read from standard input The catalog key will be written to standard output The author key will be written to standard output The title key will be written to standard output Catalog will be selected if year-ofjub is more than 1968 and less than 1971 11379 catalog record(s) considered 893 catalog record(s) selected.
    [Show full text]
  • Likely to Be Funded Transportation System
    Table 2: Likely to be Funded Transportation System Project # Project Description Project Extent Project Elements Priority Further Study Identify and evaluate circulation options to reduce motor OR 213/Beavercreek Road Refinement OR 213 from Redland Road to Molalla D0 vehicle congestion along the corridor. Explore alternative Short-term Plan Avenue mobility targets. Identify and evaluate circulation options to reduce motor I-205 at the OR 99E and OR 213 Ramp vehicle congestion at the interchanges. Explore alternative D00 I-205 Refinement Plan Short-term Terminals mobility targets, and consider impacts related to a potential MMA Designation for the Oregon City Regional Center. Driving Solutions (Intersection and Street Management- see Figure 16) Molalla Avenue from Washington Street to Molalla Avenue/ Beavercreek Road Deploy adaptive signal timing that adjusts signal timings to D1 Gaffney Lane; Beavercreek Road from Molalla Short-term Adaptive Signal Timing match real-time traffic conditions. Avenue to Maple Lane Road Option 1: Convert 14th Street to one-way eastbound between McLoughlin Boulevard and John Adams Street: • Convert the Main Street/14th Street intersection to all-way stop control (per project D13). • From McLoughlin Boulevard to Main Street, 14th Street would be restriped to include two 12-foot eastbound travel lanes, a six-foot eastbound bike lane, a six-foot westbound contra-flow bike lane, and an eight-foot landscaping buffer on the north side • From Main Street to Washington Street, 14th Street would be restriped to include
    [Show full text]