Data Sheets/Tiffs
Total Page:16
File Type:pdf, Size:1020Kb
CS 2 Conference system CS2BU Base Station Description The AKG CS2 is a fully modular and cascadable, user operated, push to talk discussion reinforcement system available in portable tabletop format or as an installed system. The CS2BU Base Station occupies a single rack space, the CS2CU & CS2DU CS2BU features intelligent functions such as automatic NOM (portable mic station) (Number of Open Microphones) limitation, selectable voice activation, which can be set to automatically open microphones as soon as they are spoken into. Other functions include output level controls for global speakers level, headphones, balanced outputs as well as input control for line, aux and microphone station input level. Delegate stations have a push to talk button as well as individual speaker level control and 3.5 mm headphone jacks. Chairman Stations differ from delegate stations only in that they feature a priority button allowing the user to override all Features other microphones. • Condenser Microphone capsules: All microphone stations can be customized to the individual CK31-cardioid, CK32-omni, user through bottom panel dipswitches and pots that allow a variety of functions to be adjusted individually. Those functions CK33-hypercardioid, CK47-hypercardioid include: & CK80-hypercardioid • Voice activation on/off • Voice activation threshold • Modular goosenecks: GN50CS (19.85”) • Voice activation hold time GN30CS (12.23”) • Microphone auto-mute (after user stops talking) • Enable/disable NOM limitation • Microphone stations: CS2CU portable chair • Priority override exemption station, CS2DU portable delegate station, • Voice zoom on/off • Loudspeaker/headphones level reset or last setting CS2CUfix installed chair station, CS2DUfix • Adjustable compression installed delegate station • Adjustable mic input level Voice zoom detects and optimizes the signal arriving at each • Connecting cables: CSMK1.25fm (4 ft.), microphone, acting like a camera’s lens “focusing” on the CSMK2.5fm (8 ft.), CSMK5fm (16.5 ft), sound source. The microphone “zooms in or out“ to a person’s voice, using a combination of leveler, limiter and compressor CSMK10fm (33 ft.), CSMK20fm (66 ft.) helping to equalize different sound levels caused by varying CSMK100oc/mob (100 meter spool – no distances, input angles and/or source strengths. connecters) • Base Station: CS2BU - Central control unit for up to 200 Microphone Stations • Power Supplies: CSPS20 - powers up to 40 delegate & chair stations • CSPS100: Powers up to 200 delegate & chair stations 5.150" [130.8mm] 5.150" 4.590" [116.6mm] 4.590" 0.115" [2.9mm] 0.236" [6.0mm] [130.8mm] 5.150" DIP SWITCH OFF ON 1 Mic. sensitivity low high 2 Mute delay 12 secs. 6 secs. 2.123" [53.9mm] 3 Auto-Mute on off 4 NOM Limitation off on 5 Voice Control off on 6 Priority mode off on + 7 Compression off on SIDE 2 DU 8 Level reset last. adj. Made in Austria CS AKG TOP BOTTOM 5.335" [135.5mm] 6.733" [171.0mm] 8.720" [221.5mm] 9.218" [234.1mm] 8.110" [206.0mm] 10.080" [256.0mm] 8 7 6 8.720" [221.5mm] 9.322" [236.8mm] 5 10.745" [272.9mm] 10.080" [256.0mm] 4 3 2 1 ON CS2CUfix / CS2DUfix 5.335" [135.5mm] 5.335" 0.240" [6.1mm] 6.733" [171.0mm] 12.230" [310.6mm] GN50CS GN30CS 19.850" [504.2mm] 2.420" [61.5mm] DIP SWITCH OFF ON + 1 Mic. sensitivity low high 2 CU 2 Mute delay 12 secs. 6 secs. KG 3 Auto-Mute on off CS A 4 NOM Limitation off on TOP 5 Voice Control off on 6 Priority mode off on 7 Compression off on 8 Level reset last. adj. BOTTOM Made in Austria 8.780" [223.0mm] 5.802" 10.118" [257.0mm] SIDE [147.4mm] 5.975" 5.975" [151.8mm] CS2CU / CS2DU 8 7 6 5 4 123 ON 5.975" [151.8mm] Specifications Specifications CS2DU/CU CS2BU INPUTS INPUTS Compatible microphones: MICROPHONE STATIONS CK31, CK32, CK33, CK47, Connector: 4 x 15-pin male HD D-sub or CK80 in conjunction with GN30CS Input level: +10 dBu (compatible to CS 1) or GN50CS Type: Electronically balanced Type: Unbalanced, with DC supply voltage Max. input level for <1% THD: Input impedance: 1.5 k Ω +13 dB Supply voltage: 5.5 V DC Max. input level for <1% Thd, V out <+3 DB: LINE 25 dB Connector: 3-pin female XLR Input level: ±0 dBu OUTPUTS LINE Type: Transformer balanced Connector: 15-pin male HD D-sub Input impedance @ 1 kHz: 30 k Ω Type: Transformer balanced, floating Max. input level for <1% THD: Rated output level: +10 dBu 17 dB Audio bandwidth: 55 to 35,000 Hz S/N Ratio, 22 to 22 kHz, QPK: AUX 81 dB Connector: 2 x female RCA System compatibility: Microphone Station input on Base Input level: -10 dBu Station, compatible with CS 1 Type: Unbalanced THD @ 1kHz: 0.25% Input impedance @ 1 kHz: EIN with noise gate, 22 Hz to 22kHz; QPK: 33 k Ω -105 dBu Max. input level for <1% THD: +15 dB HEADPHONES AND BUILT-IN SPEAKERS Headphones connectors: 2 x mini TRS jacks OUTPUTS Output power for <1% THD: RECORD 0.48 W Connector: 2 x female RCA Min. headphones load impedance:>8 Ω Output level: ± 0 dBu Audio bandwidth: 30 to 45,000 Hz Max. output level for <% THD: S/N, 22 to 22 kHz, QPK: 81 dB +17 dBu THD @ 1 kHz: 0.25% Audio bandwidth: 15 to 50,000 Hz Equivalent noise level with noise gate, 22 Kz to 22 kHz: Min. load impedance: 500 Ω -92 dBu THD @ 1kHz: 0.01% Digital potentiometer attanuation: S/N, 22 to 22 KHZ, QPK: 88 dB 32 stages from 0 to –42 dB linear, –82 dB max. LINE Connector: 3-pin male XLR SYSTEM Output level: ±0 dBu Adjustable functions: Voice activation threshold Max. output level for <% THD: Voice activation hold time +10 dBu Microphone automute ON/OFF Enable/disable NOM limitation Audio bandwidth: 20 to 40,000 Hz Voice activation ON/OFF Min. load impedance: 300 Ω Priority level Compression ON/OFF THD @ 1kHz: 0.02% "Voice zoom" ON/OFF S/N, 22 to 22 KHZ, QPK: 88 dB Headphones/speaker volume reset/last setting HEADPHONES Adjustable compression Connector: 1/4" TRS jack Operating voltage: 23 to 36 VDC Bandwidth: 17 to 25,000 Hz Current consumption: 35 to 63 mA Output level: ±0 dBu Max. power requirement: 1.9 watts Max. output level for <% THD: Size (lxwxh, Desktop version): +14 dBu 1.0 x 6.0 x 2.9 in. (257 x 153 x 74 mm) Min. Impedance: 150 Ω Net/shipping weight: 2.1 lbs. / 3.3 lbs. (950 g / 1500 g) THD @ 1kHz: 0.05% Finish: Blue Line gray / matte black S/N, 22 to 22 KHZ, QPK: 82 dB Package contents: Station without microphone and cables EFFECTS ACCESSORIES FOR THE CS2 CONFERENCE SYSTEM Connector: 1/4" TRS jack CK31, 32, 33, 47, 80 Discreet Acoustics Series microphone Output level: ±0 dBu capsule CSMK2.5fm: Connecting cable, 8 ft. 3 in. (2.5 m) Input impedance: <4.7 k Ω CSMK5fm: Connecting cable, 16 ft. 5 in. (5 m) Min. load impedance: 220 Ω CSMK10fm: Connecting cable, 33 ft. (10 m) SYSTEM CSMK20fm: Connecting cable, 66 ft. (20 m) Operating voltage: 23 to 36 VDC GN30CS: Gooseneck, approx. 12 in. (30 cm) long Current consumption: 170 to 200 mA GN50CS: Gooseneck, approx. 20 in. (50 cm) long Max. power requirement: 7.2 watts CSMK100oc/fi: 328-ft. (100 m), 0.4-in. (9.5 mm) dia. cable Size (lxwxh): 6.7 x 17 x 1.7 in. (170 x 430 x 44 mm) for permanent installation Net/shipping weight: 5.5 lbs. / 7.1 lbs. (2.5 kg / 3.2 kg) CSMK100oc/mob: 328-ft. (100 m), 0.26-in. (6.5 mm) dia. Package contents: Base Station (without power supply), cable for mobile installation User Instructions CSCONfm/fi: Female D-sub connector for permanent installation CSCONm/fi: Male D-sub connector for permanent installation CSCONfm/mob: Female D-sub connector for mobile installation CSCONm/mob: Male D-sub connector for mobile installation CSCONfloor/m/fi: Male D-sub floor connector CSCONsplit2/m/mob: Male/male D-sub adapter CSCONsplit4/m/mob: 4 x male D-sub splitter CSMKAC–US: US power cable Architects and Engineers Specifications The conference system shall be a modular, single-cable system table mount version for fixed installation. Goosenecks in two for quick installation. A base station shall control up to 200 different lengths (approx. 12 in./30 cm and approx. 20 in./50 cm) microphone stations and provide expansion ports for setting up and five different microphone capsules for optimum voice pickup systems with more than 200 microphone stations. The system shall also be available. All types of microphone stations shall shall be compatible with most current types of signal sources, provide a "Voice Zoom" function and other individually recording devices, sound systems, teleconferencing systems, adjustable functions including voice activation, automatic mute etc. The system shall include a chairperson station with a priority after prolonged pauses, noise gate, etc. The system shall be the button. Both the chairperson station and the delegate station AKG Acoustics Model CS 2. shall be available in a desktop version for mobile systems and a Limited Warranty or consequential damages. However, the limitation of any right or remedy shall not be effective where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our Valid only in the United States. AKG Acoustics warrants AKG products against defects in material service department. Be sure to include your sales slip as proof of purchase date. (We will not repair or workmanship for a period of two years from the date of original purchase for use, and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor.