LOCKS FOR ARMOURED DOORS .37

ENGLISH

Locks for armoured doors Locks for armoured doors

x1R Smart 4-4 Serie 1120 4-57 x1R Easy 4-24 Serie 800 4-58

Serie 600 4-38 Electric strikes 4-60

4-3 Locks for armoured doors x1R Smart Locks for armoured doors

0497 x1R Smart x1R SMART is a motorised electronic lock specifi cally designed for security doors. It combines the solidity of a mechanical lock with the versatility of electronic control via smartphone, RFID tag or keypad. Key points Opening occurs with the aid of a motor or the “Single Action” quick release and closing occurs through motorised action controlled by a next-generation microprocessor. In case of lack of power supply the operation of the deadbolt is guaranteed by the traditional movement of keys, equipped with a security system that is able to disconnect motorisation during operation of the mechanical cylinder.

Locks of the x1R Smart series are interchangeable with the most common mechanical locks as they use the same mechanical accessories. The electronic accessories’ “plug and play” electrical connections make installation extremely easy.

The system is managed through Iseo Argo, an app available on iOS and Android which you can use to connect your smartphone via Bluetooth 4.0 LE and manage all functions.

It can be interfaced with the Iseo access control platform or a third-party system through opto-isolated Input/Output connections which can be used to control the operation modes and states for opening and closing. By using the lockbus connection with pro- prietary protocol it is possible to have a direct and secure connection with the Iseo range devices.

All models are available with different projections and bolt centre-to-centre distances for a vast interchangeability with mechanical versions. Escutcheons are available in various fi nishes.

Thanks to the solidity of the mechanical structure it is classifi ed at the maximum grade (7) for anti-intrusion protection (EN12209).

It is certified

x1R Smart has been designed and manufactured in compliance with European standards EN14846:2008 with the following classifi cation:

3 X 9 E 0 P 7 1 3

in the Simple Action version it is also certifi ed EN 179: 2008 with the following classifi cation:

3 7 7 B 1 4 5 2 3

MAIN FUNCTIONS Smart device with Bluetooth 4.0 LE radio interface. Opening and programming via Argo App on iOS and Android devices. Motorised opening and closing of deadbolts and latchbolt Quick opening from inside the room with “Single Action” handle (optional) Opening via PIN code, RFID Credentials 13.56 Mhz (ISO 14443A and 14443B), Classic Mifare, Plus, Desfi re Opening via European profi le cylinder (EN1303, DIN 18252) Battery powered low-energy consumption device (optional) Wake up upon RFID card detection (patented) Battery charge status detection Light and sound signals Hold open function (offi ce function) without extra energy consumption Light function (latch only) programmable by the user for certain days and time slots Real Time Clock/Calendar Memory storage of 300 users Memory of the last 1000 events Software that can be update by the user in the fi eld Compatible with the main mechanical locks for security doors 4-5 Locks for armoured doors

x1R Smart

TECHNICAL FEATURES:

Backset: 63 mm Deadbolt projection: 3 mm to 13 mm Deadbolts: - In chrome-plated steel - Cylindrical section ø 18 mm - Versions with 3 pistons (37 mm) and 4 pistons (28 mm) - 2 throws - Total excursion 30 mm

Latchbolt: - In chrome plated steel - Reversible hand - Cylindrical section ø 20 mm - Adjustable projection (+6 mm)

Door contacts: - Two front contacts in chrome-plated brass - Rectangular section 10x8 - Reversible hand - Adjustable projection from 0 to 15 mm - Nylon stop with chrome plated brass contacts - Connection for power supply from 8 to 30 VDC 30W

Mechanical controls: - Set up for European profile cylinder (EN1303, DIN 18252) - Cylinder fixing system through support side screw - Handle follower: section 8 mm - Centre distance between handle follower and cylinder hole 85 mm

Lock fixings: - Mortice lock with front plate in chrome-plated steel (dimensions H 410 mm x L 35 mm x W 3 mm) - Rim lock with 4 fixing screws M6 - Rim lock with 4 fixing screw nuts M6

Lockcase dimensions: - Width 30 mm - Height 262 mm - Depth 136 mm

Top and bottom rod attachments: - In zinc-plated steel - Maximum projection 53 mm (upper), 50 mm (lower) - Rods projection 20 mm

Power supply: - Battery operated with 6 1.5 VDC alkaline batteries (duration around 30,000 opening cycles) - Power supply from 8 to 30 VDC 30W - Consumption at rest 0.05A – Maximum (forced) 2.5A

4-6 Locks for armoured doors

x1R Smart

Connections: - Bluetooth LE 4.0 radio module (integrated into external control modules) - External control module with RFID reader 13.56 Mhz (ISO 14443A-ISO 14443B) Classic Mifare, Plus, Desfire - External control module with backlit keypad and RFID reader 13.56 Mhz (ISO 14443A-ISO 14443B), Classic Mifare, Plus, Desfire - External control module with biometric fingerprint reader - Two button internal control module (encrypted communication) - Opto-isolated opening control 8-30 VDC/VAC - Power from 8 to 30 VDC 30W

Relay status signal configurable from the App: - Door secured (in frame door + deadbolts and latchbolt out) - Opening control for motorised door operator

Software: - Argo app for smartphone - Free and available for iOS and Android devices - OEM development platform available

Programming: - Master Card set for programming - With Argo App (User Management, Door parameters, Events logs, Utility) - Lock firmware and peripheral devices can be updated on-site

Opening credentials: - Card, key fob and Iseo transponder keyring - Card 13.56 Mhz (ISO 14443A-ISO 14443B) Classic Mifare, Plus, Desfire - Pin code (from 4 to 14 digits) - Fingerprint - Programming of a maximum of 300 credentials

Environmental characteristics: - Operating temperature -20°C +70°C - Storage temperature -25°C +75°C - IP lock protection grade: IP44

Reference standards: - UNI EN 14846:2008 with Classification 3X9E0P713 - UNI EN 179:2008 with Classification 377B1452AB (only the”Single Action” version)

Options and versions: - Standard or with “Single Action” quick opening device - Rim or mortice version - 3 pistons (37 mm) and 4 pistons (28 mm) - Bolt projection 3 mm or 13 mm - Battery operated (with mains electricity power supply optional) - Mains electricity (with optional back-up batteries) - Connection through 8-pole multifunction cables - Remote control connection through bipolar cable and adjustable door contact.

4-7 Locks for armoured doors

x1R Smart Installation schemes

BATTERY OPERATED

Internal side External side

3.1 7 Credentials

Transponder 4 3 3.2 2 Transponder with key

3.3 USER Set User Card

1 2 3 Keyfob key ring 1 2 3 4 5 6 1 4 5 6 7 8 9 7 8 9 * 0 # * 0 # Argo Bracelet

3.4** 3.5 ** Smartphone 5

5.1 5.2 8 Fingerprint

6 MASTER 9 Set 3 Master Card

1. x1R Smart lock 4. Escutcheons with various finishes Code 000696XXXXXXXX STANDARD Code 98NXXXX Code 000699XXXXXXXX SINGLE ACTION 5. Fingerprint reader (optional)* 2. Two-button internal control module * 5.1 Embedded reader Cod. 5E62100 Code 98PI0696 Embedded reader (Protruding) Cod. 5E63100 only for x1R Smart Code 000696XXXXX STANDARD 5.2 Reader for surface-mounted installation Cod. 5E62200

3. External control module* 6. Master Card set 3.1 Keypad + RFID Reader + Bluetooth - Desfire Cod. 5E405309.3 Code 0000098PB0696 3.2 RFID Reader + Bluetooth 7. Credentials Code 0000098TB0696 3.3 Hidden RFID reader + Bluetooth 8. Battery holder Code 0000098NB0696 Cod. 5820069600005 3.4 Multi-Reader (Keyboard + RFID + Bluetooth) Cod. 0000098101696 9. Kit 6 alkaline batteries Code 5820060000006 3.5 Multi-Reader with Fingerprint (Keyboard + RFID + Bluetooth) Cod. 0000098102696

* The codes don’t include escutcheons with various finishes 4-8 Locks for armoured doors

x1R Smart Installation schemes

MAINS ELECTRICITY POWER SUPPLY BACK-UP BATTERIES (OPTIONAL)

Internal side External side

3.1 7 Credentials 4 3 3.2 Transponder 2

3.3 Transponder with key

9 USER Set User Card

1 2 3 1 2 3 4 5 6 4 5 6 8 7 8 9 1 7 8 9 * 0 # Keyfob key ring * 0 #

3.4** 3.5 ** Argo Bracelet

5 Smartphone 10 5.1 5.2 11

Fingerprint 6 MASTER 12 Set 3 Master Card

1. x1R Smart lock 5. Fingerprint reader (optional)* Cod. 000696XXXXXXXX STANDARD 5.1 Embedded reader Cod. 5E62100 Cod. 000699XXXXXXXX SINGLE ACTION Embedded reader (Protruding)) Cod. 5E63100 5.2 Reader for surface-mounted installation 2. Two-button internal control module * Cod. 5E62200 Cod. 98PI0696 only for x1R Smart Code 000696XXXXX STANDARD 6. Master Card set - Desfire Cod. 5E405309.3 3. External control module* 3.1 Keypad + RFID Reader + Bluetooth 7. Credentials Code 0000098PB0696 3.2 RFID Reader + Bluetooth 8. 8-pole multifunction connection cable Code 0000098TB0696 Cod. 98MP0696 3.3 Hidden RFID reader + Bluetooth Code 0000098NB0696 9. Spring concealed lead cover 3.4 Multi-Reader (Keyboard + RFID + Bluetooth) Cod. 0000098101696 10. Power supply unit Code 5E3507 3.5 Multi-Reader with Fingerprint (Keyboard + RFID + Bluetooth) Cod. 0000098102696 11. Battery holder (optional) Code 5820069600005

4. Escutcheons with various finishes 12. Kit 6 alkaline batteries (optional) Cod. 98NXXXX Cod. 5820060000006

* The codes don’t include escutcheons with various finishes 4-9 Locks for armoured doors

x1R Smart Installation schemes

BATTERY OPERATED EXTERNAL POWER SUPPLY UNIT (OPTIONAL)

Internal side External side

3.1 7 Credentials 4 3 3.2 Transponder 2

Transponder with key 3.3

USER Set User Card

1 2 3 1 1 2 3 4 5 6 4 5 6 7 8 9 7 8 9 * 0 # Keyfob key ring * 0 #

Argo Bracelet 3.4** 3.5 **

5 Smartphone

5.1 5.2 8 10 Fingerprint 6 MASTER 9 Set 3 Master Card

1. x1R Smart lock 4. Escutcheons with various finishes Code 000696XXXXXXXX STANDARD Code 98NXXXX Code 000699XXXXXXXX SINGLE ACTION 5. Fingerprint reader (optional)* 2. Two-button internal control module* 5.1 Embedded reader Code 5E62100 Code 98PI0696 Embedded reader (Protruding) Code 5E63100 only for x1R Smart Code 000696XXXXX STANDARD 5.2 Reader for surface-mounted installation Cod. 5E62200

3. External control module* 6. Master Card set 3.1 Keypad + RFID Reader + Bluetooth Desfire Code 5E405309.3 Code 0000098PB0696 3.2 RFID Reader + Bluetooth 7. Credentials Code 98TB0696 3.3 Hidden RFID reader + Bluetooth 8. Battery holder Code 0000098NB0696 Code 5820069600005 3.4 Multi-Reader (Keyboard + RFID + Bluetooth) Cod. 0000098101696 9. Kit 6 alkaline batteries Code 5820060000006 3.5 Multi-Reader with Fingerprint (Keyboard + RFID + Bluetooth) Cod. 0000098102696 10. Power supply unit Code 5E3507

* The codes don’t include escutcheons with various finishes 4-10 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Smart

Rim version Motorised electronic lock with European profile cylinder. Deadbolts in chrome-plated steel ø 18 mm, projection 30 mm Reversible latchbolt ø 20 mm, adjustable projection. Handle follower 8 mm for latchbolt operation. Top and bottom attachments for rods for additional closures. Rim fixing with 4 passing screws or screw nuts. Set up for M6 passing screws for cylinder protection fixing. Reversible door sensor with adjustable projection, including alignment device. Supplied with: lock, door sensor, cylinder fixing screws, assembly instructions.

136 30

L 63 52 max 32 min

corsa 30 18 106 85 28 37 28 28

262 15 37 37 28 20

corsa 15 156 28 min 48 max

25

Smart 4 DEADBOLTS. Projection 3. Centre distance 28. 0006960328050 1-1 4 DEADBOLTS. Projection 13. Centre distance 28. 0006961328050 1-1 3 DEADBOLTS. Projection 3. Centre distance 37. 0006960337050 1-1 3 DEADBOLTS. Projection 13. Centre distance 37. 0006961337050 1-1

Smart SINGLE ACTION with quick release via the handle 4 DEADBOLTS. Projection 3. Centre distance 28. 0006990328050* 1-1 4 DEADBOLTS. Projection 13. Centre distance 28. 0006991328050 1-1 3 DEADBOLTS. Projection 3. Centre distance 37. 0006990337050 1-1 3 DEADBOLTS. Projection 13. Centre distance 37. 0006991337050 1-1

* INOX VERSION ON REQUEST

4-11 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Smart

Mortice version Motorised electronic lock with European profile cylinder. Deadbolts in chrome-plated steel ø 18 mm, projection 30 mm Reversible latch ø 20 mm, adjustable projection. Handle follower 8 mm for latchbolt operation. Top and bottom attachments for rods for additional closures. Mortice fixing with front plate in chrome-plated steel mm 410x35x3. Set up for M6 passing screws for cylinder protection fixing. Reversible door sensor with adjustable projection, including alignment device. Supplied with: lock, door sensor, cylinder fixing screws, assembly instructions.

35

136 30

3 63 52 max 32 min

corsa 30 106 28 85 37 18 28 37 28 410 262 15 37 28 20

corsa 15 156 28 min 48 max

25

Smart 4 DEADBOLTS. Centre distance 28. 0006960028050 1-1 3 DEADBOLTS. Centre distance 37. 0006960037050 1-1

Smart SINGLE ACTION with quick release via the handle 4 DEADBOLTS. Centre distance 28. 0006990028050* 1-1 3 DEADBOLTS. Centre distance 37. 0006990037050 1-1

* INOX VERSION ON REQUEST

4-12 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Smart Panic 4RM Motorized and anti-panic lock for armoured doors NEW Rim version Motorized anti-panic lock PANIC 4RM compliant with EN1125/EN179 with European profile cylinder. The lock inherits the characteristics of the X1R SMART Single Action Deadbolt in chromed steel diam. 18 mm, stroke 30 mm Reversable latch diam. 20 mm, adjustable protrusion Square spindle 8 mm. Suitable for fire-resistant doors Bar attachments for additional high and low locking Preparation of M6 through screws for cylinder protection escutcheon fixing Reversible door contact sensor with adjustable protrusion. Comes equipped with: lock, leaf approach contact, strike plate, cylinder fixing screws, instructions Operation From the inside: pushing the bar (EN1125) or turning the handle (EN179) retracts the latch and deadbolts. From the outside: The key operates the deadbolts and retracts the latch.

136

30 91,5 = =

3/13 63 42 max. 22 min

corsa 30 18 106 85 92 37 38 = = 37 8 164 28 28 28 262 52,4 56 15 37 28 86 20 115 6,3 n.5 x n.3 x M5 corsa 15 156 23 = 65 40 18 min 38 max. 14,2 25 49 59

4 DEADBOLTS, protrusion 3, centre distances 28 00069H0328050 1-1 4 DEADBOLTS, protrusion 13, centre distances 28 00069H1328050 1-1

3 DEADBOLTS, protrusion 3, centre distances 37 00069H0337050 1-1 3 DEADBOLTS, protrusion 13, centre distances 37 00069H1337050 1-1

4-13 Locks for armoured doors Code singola Confezione multipla Confezione Min. ord.

Pro 4RM NEW

Panic exit bar for armoured doors Reversible activation bar PRO 4RM for PANIC 4RM locks. Square spindle 8 mm, rotation of 40° The reduced dimensions allow to use the pre-existing escutcheons of the cylinder Matching accessories to be ordered separately: Oval bar series 9459* Support plate 0000A00103

Painted BLACK 94H0000504S8 1 - 1 YES ENDUR4NCE FINISH 94H0000R04S8 1 - 1 YES Painted WHITE 94H0000404S8 1 - 1 YES Painted METAL GREY 94H0000704S8 1 - 1 YES

4-14 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Smart Accessories

2-BUTTON INTERNAL CONTROL MODULE Compatible with x1R SMART, includes connection cable L 60 cm. Encrypted data communication protocol. 0000098PI0696 1-1

EXTERNAL CONTROL MODULE WITH RFID READER 13.56 MHZ AND BLUETOOTH 4.0 LE Compatible with x1R SMART, includes pair of connection cables L 100 cm Encrypted data communication protocol. 0000098TB0696 1-1

EXTERNAL CONTROL MODULE WITH KEYBOARD, RFID READER 13,56 MHZ AND BLUETOOTH 4.0 LE compatible with x1R SMART includes pair of connection cables L 100 cm Encrypted data communication protocol. 0000098PB0696 1-1

Hidden RFID reader and BLUETOOTH. Compatible with x1R Smart Includes pair of connection cables L 100 cm 0000098NB0696 1-1

METAL BOX FOR HIDDEN READER 0000098NBM696 1-1

1 2 3 MULTI-READER 4 5 6 Compatible with x1R SMART. 7 8 9 * 0 # Includes black cover and 3 connection cables L 1 mt. Numeric keyboard, RFID reader 13,56 Mhz, Bluetooth 4.0 LE “Wake on Hand” technology. Encrypted data communication protocol. 0000098101696 1-1

1 2 3 MULTI-READER WITH FINGERPRINT 4 5 6 7 8 9 Compatible with x1R SMART. * 0 # Includes black cover and 3 connection cables L 1 mt. Numeric keyboard, RFID reader 13,56 Mhz, biometric reader, Bluetooth 4.0 LE “Wake on Hand” technology. Encrypted data communication protocol. 0000098102696 1-1

4-15 Locks for armoured doors Code singola Confezione multipla Confezione Min. ord.

x1R Smart Accessories

EMBEDDED FLUSH FINGERPRINT READER Compatible with x1R SMART. Includes pair of connection cables L 100 cm Encrypted data communication protocol. Required thickness inside the door 26 mm. 5E62100 1-1

EMBEDDED PROTRUDING FINGERPRINT READER Compatible with x1R SMART. Includes pair of connection cables L 100 cm Encrypted data communication protocol. Required thickness inside the door 19 mm. 5E63100 1-1

SURFACE MOUNTED FINGERPRINT READER Compatible with x1R SMART. Includes pair of connection cables L 100 cm Encrypted data communication protocol. Required thickness inside the door 15 mm. 5E62200 1-1

IP66 SURFACE MOUNTED FINGERPRINT READER Compatible with x1R SMART with embedded cable and IP66 connector. Encrypted data communication protocol. Required thickness inside the door 15 mm. 5E62220 1-1

IP66 CABLE FOR FINGERPRINT READER L 1.2 mt. Connection cable between IP66 surface mounted fingerprint reader and x1R Smart 0000IS00246 1-1

IP66 CABLE FOR FINGERPRINT READER L 10 mt. Connection cable between IP66 surface mounted fingerprint reader and x1R Smart 0000IS00247 1-1

4-16 Locks for armoured doors Code singola Confezione multipla Confezione Min. ord.

x1R Smart Accessories

MASTER CARD SET. 3 cards (#1, #2, #3 the next Master automatically cancels the previous one). #1 0608987 ISO 14443/A chip. Package: 3 cards, instructions.

DESFIRE Logo Iseo 5E405309.3 1-1

USER CARDS ISO 14443/A chip.

DESFIRE Logo Iseo 5E405301 1-1

MIFARE CLASSIC Logo Iseo 5E402001.A 10 - 10 Blank on both sides 5E402011 10 - 10

TRANSPONDER ISEO 13,56 Mhz Only transponder (red) XKEY006960000 1-1 Only transponder (grey) XKEY006960200 1-1 Transponder with key (blue)* XKEY006960100 1-1 3 transponders (red) XKEY016960000 1-1 3 transponders (grey) XKEY016960200 1-1 *Cylinder and keys to be ordered separately. Specify dimensions of the cylinder for version with mechanical key.

USER KEYFOB TRANSPONDER Mifare 13,56 Mhz 1K ISO 14443/A chip With logo ISEO KEYFOB1356MF1 4-4

4-17 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Smart Accessories

BATTERY HOLDER in black nylon for 6 D-type batteries Compatible with x1R SMART supplied with bipolar connection cable L 240 cm. (batteries not provided). 5820069600005 1-1

6 D-TYPE BATTERIES 1.5V ALKALINE 5820060000006 1-1

POWER SUPPLY UNIT 9V DC - 4 A for direct power. Compatible with x1R SMART with connection cable. 5E3507 1-1

BIPOLAR CONNECTION CABLE FOR REMOTE CONTROL L 450 cm compatible with x1R SMART. 0000098CR0696 1-1

8-POLE MULTIFUNCTION CONNECTION CABLE L 450 CM FOR REMOTE CONTROL, DOOR STATUS, DIRECT POWER AND LOCKBUS COMMUNICATION Compatible with x1R Smart. 0000098MP0696 1-1

ADJUSTABLE DOOR CONTACT KIT FOR REMOTE CONTROL Includes bipolar connection cable L 200 cm and door contact. Compatible with x1R SMART. 0000098MO2170 1-1

4-18 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Smart Accessories

FIXING PLATE in steel 3 mm thickness. 4 fixing holes M6 0000099069800 1-1

STRIKING PLATE COVER IN CHROME-PLATED STEEL. L = 28 mm 2000006980028 1-1 L = 37 mm 2000006980037 1-1

SPRING CONCELEAD LEAD COVER, flexible. For openings up to 180°. 0000060130000 1-1

CONCELEAD LEAD COVER, flexible, flush version L=260 For openings up to 90°. Compatibile con Thesis, Top Exit DGT, x1R. 0000881000000 1-1

CONCELEAD LEAD COVER, flexible, flush version L=260 For openings up to 90°. Compatibile con Thesis, Top Exit DGT, x1R. 94403110E 1-1

CONCEALER LEAD COVER external, flexible, Rim version L=300 Opening until 180° 94403010E 1-1

4-19 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Smart Accessories

Universal single escutcheons made of a nylon base, brass cover and fixing screw. Compatible with: 98P* - 98T*

BRONZE PLATED 0000098N0XBRO 1-1 POLISHED CHROME 0000098N0XCRL 1-1 SATIN CHROME 0000098NOXCRS 1-1 POLISHED BRASS VARNISHED 0000098N0XOLV 1-1 BRONZE PLATED 0000098N1DBRO 10 - 10 POLISHED CHROME 0000098N1DCRL 10 - 10 SATIN CHROME 0000098N1DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N1DOLV 10 - 10

Universal rectangular single escutcheons made of a nylon base, brass cover and fixing screw. Compatible with: all readers and round inserts code *98PI0698, *98TE0698 e *98PE0698.

BRONZE PLATED 0000098N2XBRO 1-1 POLISHED CHROME 0000098N2XCRL 1-1 SATIN CHROME 0000098N2XCRS 1-1 POLISHED BRASS VARNISHED 0000098N2XOLV 1-1 BRONZE PLATED 0000098N2DBRO 10 - 10 POLISHED CHROME 0000098N2DCRL 10 - 10 SATIN CHROME 0000098N2DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N2DOLV 10 - 10

Common accessories can be found on pages 4-61 4-20 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Smart Accessories

Cover for EMBEDDED FLUSH FINGERPRINT READER Compatible with: 5E62100

POLISHED BLACK 5E621105 1-1 SATIN CHROME 5E62110Y 1-1 POLISHED BRASS 5E62110L 1-1

Cover for EMBEDDED PROTRUDING FINGERPRINT READER Compatible with: 5E63100

POLISHED BLACK 5E631105 1-1 SATIN CHROME 5E63110Y 1-1 POLISHED BRASS 5E63110L 1-1

Cover for SURFACE MOUNTED FINGERPRINT READER Compatible with: 5E62200

POLISHED BLACK 5E622105 1-1 SATIN CHROME 5E62210Y 1-1 POLISHED BRASS 5E62210L 1-1

4-21 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Smart Accessories

NYLON INSERT for European profile cylinder. 0000098N00CIL 10 - 10

2255 EKOS - Escutcheons and cylinders protection in zinc alloy with anti-drill balls, setting system.

latch projection 24 mm - POLISHED CHROME 0000098114624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098124624 10 - 10 latch projection 24 mm - SATIN CHROME 0000098134624 10 - 10 4646 latch projection 24 mm - BRONZE PLATED 0000098144624 10 - 10 Spacer - projection 5 mm 0000098460005 10 - 10 Anti-snatch spacer - projection 5 mm 0000098550006 10 - 10

2255 ONE - Escutcheons and cylinders protection in tempered steel, included fixing screw M6.

latch projection 24 mm - BLACK VARNISHED 0000098014624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098024624 10 - 10 latch projection 24 mm - SATIN CHROME 0000098034624 10 - 10 4646 latch projection 24 mm - POLISHED CHROME 0000098044624 10 - 10

Common accessories can be found on pages 4-61 4-22 Locks for armoured doors Code package Single package Multiple Min. ord.

Panic 4RM - Pro 4RM Accessories 130 60 NEW

5 5 x M 66,5 7,3 Push-bar PRO 4RM fixing plate 0000A00103 10 - 10 7

21,5 20 19 93 255 178 50 171

8,3 10

3 49

108

3 n°4 x 35 = = 6,2 19 = =

4 x 18,8 18,8 3 x Faceplate centre distances 28 for motorised PANIC 4RM 10400069H2800 1-1 28 28 37 37 28 394 410 37 28

20,30

Faceplate centre distances 37 for motorised PANIC 4RM 10400069H3700 1-1

Strike plate centre distances 28 20000069H028N 5-5

Strike plate centre distances 37 20000069H037N 5-5

4-23 Locks for armoured doors x1R Easy Locks for armoured doors

0497 x1R Easy x1R, available in mortice and rim versions, is an electronic motorized lock specifi cally developed to be installed on armoured doors.

Key points It works with an electric motor controlled by a powerful microprocessor and the deadbolt action is always guaranteed by the me- chanical operation of the key, even in case of power supply failure. x1R locks have the same sizes and accessories as the mechanical locks, so they are interchangeable; thanks to simply electric connections the installation is very easy.

All versions are reversible, have different deadbolt extensions and centre distances.

Escutcheons are available in three different fi nishes.

Thanks to its structure it is classifi ed at the maximum level (7) for the anti-intrusion protection (EN12209).

It is certified

x1R is conceived and manufactured in compliance with European standards EN14846 with the following classifi cation:

3 X 9 E 0 P 7 1 3

Technical features

Central lock with top and bottom rods connector. Versions with 3 or 4 deadbolts diameter 18 mm. European profi le cylinder hole. Handle follower 8 mm. Backset 63 mm. Centre distance 85 mm. Power supply: - battery (6 batteries 1,5 Vdc) - power supply unit from 9 to 14 Vdc - rechargeable battery (6 batteries 1,2 Vdc) 5 function modes to be set by the end user. RFID cards/keys reader frequency 125 Khz. Numerical keyboard (optional). Opening by external control (remote control, pushbutton, etc.) Keys or master and user code programming. Keyboard for opening and programming (from inside). In line frame sensor. Operating temperature: -10°C ÷ +60°C

4-25 Locks for armoured doors

x1R Easy Installation schemes

OPERATING WITH ALKALINE BATTERIES

2 11 Credentials 2.1

Transponder

Transponder with key

1.2

1 Set User Card

6 8

7 1.1 2.1

2

3 3.1

Internal side

1. Mortice and rim lock 4. Escutcheon (please specify the finish) 1.1 Door sensor 5. Programming logic (supplied with the lock) 1.2 Cable for remote control 6. Concealer lead cover (supplied with the lock) 7. xKey (please specify number and type) 2. Deviator 2.1 Connecting rod 8. Cylinder protection Ø 46 H 26 mm

3. Battery holder 9. Transponder reader with power cable 3.1 Alcaline batteries set 10. Keyboard with TAG reader

11. Credentials

4-26 Locks for armoured doors

x1R Easy Installation schemes

OPERATING WITH RECHARGEABLE BATTERIES

2 2.1 14 Credentials

Transponder 10

Transponder with key 1.2 9 11 1 Set User Card

6 8 Radio remote control 1.1 7 2.1

12

2 13

3

3.1

Internal side

1. Mortice and rim lock 7. xKey (please specify number and type) 1.1 Door sensor (supplied with the lock) 8. Cylinder protection Ø 46 H 26 mm 1.2 Cable for remote control (supplied with the lock) 9. Transponder reader

2. Deviator 10. Keyboard with TAG reader 2.1 Connecting rod 11. Receiver for radio remote control 3. Battery holder with power cable 12. Battery charger 3.1 Rechargeable batteries set 13. Transformer 4. Escutcheon (please specify the finish) 14. Credential 5. Programming logic

6. Concealer lead cover

4-27 Locks for armoured doors

x1R Easy Installation schemes

OPERATING WITH DIRECT POWER SUPPLY

2 2.1 13 Credentials

3 Transponder 3

Transponder with key

1.2 10 1 Set User Card 3 3 7 Radio remote control

6 1.1 2.1

2

Internal side

1. Mortice and rim lock 1.1 Door sensor 7. Cylinder protection Ø 46 H 26 mm (supplied with the lock) 1.2 Cable for remote control 8. Transponder reader (supplied with the lock) 9. Keyboard with TAG reader 2. Deviator 2.1 Connecting rod 10. Receiver for radio remote control

3. Escutcheon (please specify the finish) 11. I/O electronic boar

4. Programming logic 12. Power supply unit

5. Concealer lead cover 13. Credential

6. xKey (please specify number and type)

4-28 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Easy x1R Easy with electronics on board. Power supply 9Vdc. Consumption 0.2 A. 1,5 sec. delayed time. 15 sec. courtesy time. Operating temperature: -10°C ÷ +60°C

RIM VERSION 4 DEADBOLTS. Projection 3. Centre distance 28. 0000006980328* 1-1 4 DEADBOLTS. Projection 13. Centre distance 28. 0000006981328 1-1 3 DEADBOLTS. Projection 3. Centre distance 37. 0000006980337 1-1 3 DEADBOLTS. Projection 13. Centre distance 37. 0000006981337 1-1

MORTICE VERSION 4 DEADBOLTS. Centre distance 28. 0000006980028* 1-1 3 DEADBOLTS. Centre distance 37. 0000006980037 1-1

* INOX VERSION ON REQUEST

4-29 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Easy Accessories

X.KEY TRANSPONDER Please specify the size of the cylinders for the version with mechanical key. Suitable for x1R Easy. transponder only (red) XKEY006980000 1-1 transponder only (grey) XKEY006980200 1-1 transponder with key (blue)* XKEY006980100 1-1 3 transponders (red) XKEY016980000 1-1 3 transponders (grey) XKEY016980200 1-1

*Cylinders and keys to be ordered separately.

XCARD USER 125 KHz. XCARD Compatible with transponder reader *98TE0698 and rectangular keyboard *98PE2698 XKARD69800125 10 - 10

KEYCHAIN TRANSPONDERS XKEY - BROWN 125 Khz - Suitable for x1R Easy XKEY006980300 1-1

KEYCHAIN TRANSPONDERS XKEY - GREY 125 Khz - Suitable for x1R Easy XKEY006980400 1-1

4-30 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Easy Accessories

INTERNAL OPENING PUSHBUTTONS AND PROGRAMMING BOARD. Suitable for x1R Easy. 0000098PI0698 1-1

TRANSPONDER READER (TAG). Suitable for x1R Easy. 0000098TE0698 1-1

KEYPAD WITH INTEGRATED TAG READER. Suitable for x1R Easy. 0000098PE0698 1-1

RECTANGULAR KEYPAD WITH INTEGRATED TAG READER. Suitable for x1R Easy. 0000098PE2698 1-1

SQUARE INTERNAL OPENING PUSHBUTTONS AND PROGRAMMING BOARD. Suitable for x1R Easy. 0000098PI2698 1-1

4-31 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Easy Accessories

ROLLING CODE RADIO REMOTE CONTROL.

A B

A RADIO REMOTE CONTROL 5870006980003 1-1 B RECEIVER 5870006980008 1-1

GATES RADIO FREQUENCY CONTROL. 5870006980006 1-1

VOLTAGE REGULATOR input 12V dc - Output 9Vdc. 5870006980009

I/O ELECTRONIC BOARD. 5870006980007 1-1

4-32 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Easy Accessories

BATTERY HOLDER (batteries not included) 5820069800005 1--1

6 BATTERIES TYPE D 1,5V ALKALINE 5820060000006 1-1 RECHARGEABLE 5820060000016 1-1

BATTERY CHARGER. 5820060010016 1-1

TRANSFORMER input 220 Vdc-Output 12 V-15 VA 5820006980000 1-1

POWER SUPPLY UNIT 9 V – 2,89 A for direct power supply (without batteries). 5E3508 1-1

4-33 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Easy Accessories

2255 EKOS - Escutcheons and cylinders protection in zinc alloy with anti-drill balls, setting system.

latch projection 24 mm - POLISHED CHROME 0000098114624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098124624 10 - 10

4646 latch projection 24 mm - SATIN CHROME 0000098134624 10 - 10 latch projection 24 mm - BRONZE PLATED 0000098144624 10 - 10 Spacer - projection 5 mm 0000098460005 10 - 10 Anti-snatch spacer - projection 5 mm 0000098550006 10 - 10

2255 ONE - Escutcheons and cylinders protection in tempered steel, included fixing screw M6.

latch projection 24 mm - BLACK VARNISHED 0000098014624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098024624 10 - 10 latch projection 24 mm - SATIN CHROME 0000098034624 10 - 10 4646 latch projection 24 mm - POLISHED CHROME 0000098044624 10 - 10

4-34 Locks for armoured doors Code package Single package Multiple Min. ord. x1R Easy Accessories

Universal oval single escutcheons made of a nylon base, brass cover and fixing screw. Compatible with: all round readers and inserts code *98PI0698, *98TE0698 e *98PE0698.

BRONZE PLATED 0000098N0XBRO 1-1 POLISHED CHROME 0000098N0XCRL 1-1 SATIN CHROME 0000098NOXCRS 1-1 POLISHED BRASS VARNISHED 0000098N0XOLV 1-1 BRONZE PLATED 0000098N1DBRO 10 - 10 POLISHED CHROME 0000098N1DCRL 10 - 10 SATIN CHROME 0000098N1DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N1DOLV 10 - 10

Universal rectangular single escutcheons made of a nylon base, brass cover and fixing screw. Compatible with: all round readers and inserts code *98PI0698, *98TE0698 e *98PE0698.

BRONZE PLATED 0000098N2XBRO 1-1 POLISHED CHROME 0000098N2XCRL 1-1 SATIN CHROME 0000098N2XCRS 1-1 POLISHED BRASS VARNISHED 0000098N2XOLV 1-1 BRONZE PLATED 0000098N2DBRO 10 - 10 POLISHED CHROME 0000098N2DCRL 10 - 10 SATIN CHROME 0000098N2DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N2DOLV 10 - 10

4-35 Locks for armoured doors Code package Single package Multiple Min. ord.

x1R Easy Accessories

Cover for KEYPAD WITH INTEGRATED TAG READER. Compatible with: only with rectangular keyboard code *98PE2698

POLISHED BLACK 0000098CPE005 1-1 SATIN CHROME 0000098CPE00Y 1-1 POLISHED BRASS 0000098CPE00L 1-1 BRONZE 0000098CPE00B 1-1

Cover for INTERNAL OPENING PUSHBUTTONS AND PROGRAMMING BOARD. Compatible with: only with square programming logic code *98PI2698

POLISHED BLACK 0000098CPI005 1-1 SATIN CHROME 0000098CPI00Y 1-1 POLISHED BRASS 0000098CPI00L 1-1 BRONZE 0000098CPI00B 1-1

NYLON INSERT for European profile cylinder. 0000098N00CIL 10 - 10

STEEL SUPPORTING PLATE thickness 3 mm. 0000099069800 1-1

* INOX VERSION ON REQUEST

4-36

Locks for armoured doors Locks for armoured doors

Serie 600

All 600G e 600GF series cylinder locks are equipped with a deadbolt movement mechanism with gear whe- els. This system raises the quality standards to a market leading position, such as: - cylinder rotation with minimal effort - silent movement - very high cyclic durability - no wear of the cylinder cam - impossibility of key catching due to insufficient rotation - compatible with cylinders of various origin

All 600 series cylinder locks with gear mechanism comply with grade 7 (maximum) of standard EN12209 in relation to “property security”.

All 600 series cylinder have side screws to fix the cylinder. This is the most widespread system and as well as being very practical it provides strong support to the cylinder which, being completely enclosed in its casing, has higher resistance compared with classic fixing with frontal screws.

All 600 series cylinder Double Bit locks have 6 independent gorges and a mentonnet in carbo-nitrided steel that have a special profile with an anti-manipulation system i.e. effective protection against opening attempts without break-in using picklocks and/or manipulation tools. This feature raises the security standards to a leading position on the market.

All 600 series cylinder Double Bit locks with the deadbolt reinforcement system “H” (on request) reach grade 7 (maximum) of the standard EN12209 in relation to “property security”. Locks with the deadbolt reinforce- ment system (optional) and with the anti-manipulation system (standard) are recognised as an “anti-burglar” KN system.

All 600 series cylinder Double Bit locks can be rekeyable i.e. the construction keys and/or first property keys can be replaced by new keys that exclude the previous keys, for more security and your own peace of mind. This operation, which is simple, quick and therefore extremely private, can be carried out directly by the user in just a few seconds with the door open, without replacing internal parts of the lock nor disassembling panels, escutcheons etc.

All 600 series cylinder Double Bit locks are protected against “power keys”. This is a key-shaped tool made from highly resistant material which is used to break the blocking elements of a lock. For this reason the deadbolt movement plate has a special structure in which the dragging element has a section for “controlled breakage” which prevents unauthorized opening.

All 600 series cylinder Double Bit locks have several configurations to adapt themselves to various types of doors. -“D” and “G”: locks with latchbolt at the bottom, handle at the top, key hole in the centre -“DF” and “GF”: locks with latchbolt at the top, handle in the centre, keyhole at the bottom -“DP” and “GP”: combined locks with latchbolt at the bottom, handle at the top, keyhole in the centre and service lock at the bottom -“DFP” and “GFP”: combined locks with latchbolt at the top, handle in the centre, keyhole at the bottom and service lock at the top

Lock fixing types: rim, mortice, lateral screw nuts

rim GENERAL DIMENSIONS (mm) Case Dimensions Mono-system E=63 206 H x 136 L x 30 S Mono-system E.73 206 H x 146 L x 30 S Combined DP - GP 254 H x 136 L x 30 S Combined DFP - GFP 294 H x 136 L x 30 S Front plate dimensions Mono-system 356 x 35 x 3 Combined DP - GP 356 x 35 x 3 Combined DFP - GFP 406 x 35 x 3 Throws Double Bit 4 x 10 = 40 mm mortice Geared 30mm with two key turns European Cylinder 2 x 15 = 30 mm Service Cylinder 2 x 10 = 20 mm Rods projection All versions 20 Piston projection All versions 18 Latchbolt diameter All versions 20 (Reversible) Pistons centre distance 608D-DP, 668G-GP 28 - 37 608DF-DFP, 668GF-GFP 28 - 38 lateral screw nuts Pistons projection Rim 3,5 - 13,5 Mortice 0,5 Doors opening direction INTERNAL EXTERNAL

Inside left Inside right Outside right Outside left DIN right DIN left DIN left DIN right

4-39 Locks for armoured doors Serie 600

CERTIFICATION Some articles of the 600 series have obtained the following local certifi castions: Items Description Certifi er Reference standard Nation

600DM Double bitted key 600G-GF Cylinder gear motion EN 12209 Italy 600M Two throws movement

Cylinder gear motion 6S8G-6S2G in combination with 6S8GF-6S2GF France Cylinders ISEO R7 or R50 6S8GB Cylinder protection EKOS H61

642D/DF; 648D/DF; 648DP/DFP; Double bitted key 632D/DF; 638D/DF; 638DP/DFP; ГOCT P 52582-2006 GOST ГOCT 5089-2003 Russia 662G/GF; 672G/GF ГOCT 538-2001 668G/GF; 678G/GF Cylinder gear motion 668GP/GFP; 678GP/GFP

642D/DF; 648D/DF; 648DP/DFP; Double bitted key 632D/DF; 638D/DF; 638DP/DFP; EN 12209 Poland IMP KT/401/IMP/2009 662G/GF; 672G/GF Cylinder gear motion 668G/GF; 678G/GF 668GP/GFP; 678GP/GFP

For double bit locks. The rekeyable TK system allows you to disable the construction key (which only K operates the latch and the fi rst two throws). With the door open the owner key is inserted. After a com- plete locking (4 throws), it replaces and defi nitively cancels the construction key, which cannot be used C P anymore. TK System

K1 For double bit locks. Locks equipped with TK1 system are supplied with a construction key, three owner keys and another owner key which are protected by sealed package. The construction key, which is different for each lock, operates the latch and the fi rst two throws to ensu- C P P1 re high security even after having completed construction works of the house. TK1 System After having inserted the owner keys into the lock and performed a complete locking (4 throws), the owner of the house defi nitively disables the construction key, making it unusable for anyone. In case of theft or loss the second owner key can be used with the same procedure. The keys used previously cannot be used anymore. The TK1 system is available on all 600 series double bit locks.

K2 For double bit locks. Locks equipped with TK2 system are provided with a service key and three fi rst level owner keys, one second level owner key and one third level owner key which are all protected in a sealed package. C P P1 P2 The service key operates the latchbolt and the fi rst two throws and is normally used by a person whose TK2 System access to the house should be considered limited or temporary. The fi rst level owner keys allow the home owner to close and open the lock, and if necessary, temporarily prevent access to the holder of the service key. When the lock is completely closed (4 throws) use of the service key is in fact inhibited. If you want to enable access using the service key while maintaining security of the house, lock the door with only 2 throws. In case of theft or loss, inserting the second level owner key into the lock and locking with 4 throws, the home owner defi nitively disables all keys used previously, thus rendering them unusable for anyone. With the same procedure you can use the third level owner key. The keys used previously will therefore be unusable. The TK2 system is available on all 600 series double bit locks.

4-40 Locks for armoured doors Serie 600

C Double bit locks are provided with keys of standard length 110 mm. However shorter keys of 95mm (cod. 50.00.95) are also available. In versions with the 95 mm key the key guide code 201.00.608D.00 is only supplied on request. Key length

KN H For double bit locks. This system allows you to increase the capacity of the mentonnet pin and conse- quently the deadbolt’s resistance to axial load, in case of force, up to 6KN, reaching security grade 7 (maximum) EN12209:2005. Deadbolt reinforce- ment system D For all 600 series locks. Set up for side fixing with screw nuts and M6 screws.

Side fixing system J For cylinder locks with 660 series gear mechanism. This special system operates automatically in case of forced extraction of the cylinder. It prevents the retraction of the deadbolt, even when the cylinder is completely out. The system is irreversible, once it is inserted the lock remains blocked. (Self Locking System) This system is reversible and does not determine whether the lock is left or right handed.

F Cylinder fixing with front screws. Using a front screw which blocks the cylinder, it is possible to fix it while maintaining the case support. The system can be supplied for 600GF mono-system or combined versions. Front cylinder fixing R For cylinder locks with traditional mechanism. To increase the lock’s resistance there are three anti-cut tempered steel pins inserted into the pistons.

Deadbolt with anti- cut reinforcement

For combined locks. “Dependent block” version. B Once closed, the primary lock is blocked by the secondary lock. It is impossible to operate the primary lock even by using the original key. The secondary lock can only be operated if the primary lock is in a locked position. For locks with primary double bit keys it is useful to ensure higher security against “Dependent block” housebreaking with tampering tools, for locks with primary cylinder keys it is useful to ensure absolute version security for when you want to temporarily prevent access even to the holders of an enabled key, whether they are the legitimate owner or whether your keys have been lost or stolen. I For combined locks. “Independent block” version. Just like the “B” function with the difference that the secondary lock is independent of the primary lock.

“Independent block” version

L For combined locks. “Limiting device” version. The two locks are completely independent. The secondary lock can be operated even if the primary lock is in the open position. Additionally, if locked with only one throw, acts as an opening limiting device. “Limiting device” Similar to version P, it has the the security limiting device function in addition. version

For combined locks. “Night lock” version. X Once locked, the primary lock is blocked by the operation of the secondary lock. In this case it is impos- sible to operate the primary lock even by using the original key. The secondary lock can only be operated if the primary lock is in a closed position, but does not slide the deadbolt since it is lacking and acts only “Night lock” version as a safety block. It is a similar example to the B version, but since it works with an internal half cylinder (which is operated only from the inside and which cannot be seen or attacked from the outside), it has a better guarantee against break-ins.

4-41 Locks for armoured doors Serie 600 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 cylinder locks with gear movement

662G Series Deadbolt only, 30 mm excursion, three locking points, zinc-plated. centre distance 28 mm, latch projection 3,5 mm 0066203280G00 1-1 centre distance 28 mm, latch projection 13,5 mm 0066213280G00 1-1 centre distance 37 mm, latch projection 3,5 mm 0066203370G00 1-1 centre distance 37 mm, latch projection 13,5 mm 0066213370G00 1-1

On request

J D

668G Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated. centre distance 28 mm, latch projection 3,5 mm 0066803280G00* 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813280G00* 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803370G00* 1-1 centre distance 37 mm, latch projection 13,5 mm 0066813370G00* 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803280G04 5-5 centre distance 28 mm, latch projection 13,5 mm 0066813280G04 5-5 centre distance 37 mm, latch projection 3,5 mm 0066803370G04 5-5 centre distance 37 mm, latch projection 13,5 mm 0066813370G04 5-5

On request

J D

668G - 73 Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated, backset 73 mm. centre distance 28 mm, latch projection 3,5 mm 0066803280G70 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803370G70 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803280G74 5-5 centre distance 37 mm, latch projection 3,5 mm 0066803370G74 5-5

On request

J D

668G - 89 Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated, backset 89 mm lateral fixing system centre distance 37 mm, latch projection 5 mm 0066805370G80 1-1 centre distance 37 mm, latch projection 5 mm 0066805370G84 5-5

On request

J

* INOX VERSION ON REQUEST

4-43 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 cylinder locks with gear movement

672G Series Deadbolt only, 30 mm excursion, three locking points, front plate in chrome plated steel, zinc-plated. centre distance 28 mm, latch projection 0,5 mm 0067200280G00 1-1 centre distance 37 mm, latch projection 0,5 mm 0067200370G00 1-1

On request

J

678G Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, front plate in chrome plated steel, zinc-plated. centre distance 28 mm, latch projection 0,5 mm 0067800280G00* 1-1 centre distance 37 mm, latch projection 0,5 mm 0067800370G00 1-1

On request

J

662GF Series Deadbolt only, 30 mm excursion, three locking points, zinc-plated. centre distance 28 mm, latch projection 3,5 mm 0066203280GF0 1-1 centre distance 28 mm, latch projection 13,5 mm 0066213280GF0 1-1 centre distance 38 mm, latch projection 3,5 mm 0066203380GF0 1-1 centre distance 38 mm, latch projection 13,5 mm 0066213380GF0 1-1

On request

J F D

668GF Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated. centre distance 28 mm, latch projection 3,5 mm 0066803280GF0* 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813280GF0* 1-1 centre distance 38 mm, latch projection 3,5 mm 0066803380GF0* 1-1 centre distance 38 mm, latch projection 13,5 mm 0066813380GF0* 1-1

centre distance 28 mm, latch projection 3,5 mm 0066803280GF4 5-5 centre distance 28 mm, latch projection 13,5 mm 0066813280GF4 5-5 centre distance 38 mm, latch projection 3,5 mm 0066803380GF4 5-5 centre distance 38 mm, latch projection 13,5 mm 0066813380GF4 5-5

On request

J F D

* INOX VERSION ON REQUEST

4-44 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 cylinder locks with gear movement

672GF Series Deadbolt only, 30 mm excursion, three locking points, front plate in chrome plated steel, zinc-plated. centre distance 28 mm, latch projection 0,5 mm 0067200280GF0 1-1 centre distance 38 mm, latch projection 0,5 mm 0067200380GF0 1-1

On request

J F

678GF Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, front plate in chrome plated steel, zinc-plated. centre distance 28 mm, latch projection 0,5 mm 0067800280GF0* 1-1 centre distance 38 mm, latch projection 0,5 mm 0067800380GF0 1-1

On request

J F

* INOX VERSION ON REQUEST

4-45 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 cylinder locks with traditional movement

668M Series Deadbolt 2 throws and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated. centre distance 28 mm, latch projection 3,5 mm 0066803280X00 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813280X00 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803370X00 1--1 centre distance 37 mm, latch projection 13,5 mm 0066813370X00 1-1

centre distance 28 mm, latch projection 3,5 mm 0066803280X04 5-5 centre distance 37 mm, latch projection 3,5 mm 0066803370X04 5-5

On request

R D

668M - 73 Series Deadbolt 2 throws and reversible latchbolt, 30 mm excursion, points, three locking zinc-plated, backset 73 mm. centre distance 28 mm, latch projection 3,5 mm 0066803280X70 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803370X70 1-1

On request

R D

668MF Series Deadbolt and reversible latchbolt, 30 mm excursion, three locking points, zinc-plated, lateral cylinder fixing and from front plate. centre distance 28 mm, latch projection 3,5 mm 0066803280XB0 1-1 centre distance 38 mm, latch projection 3,5 mm 0066803380XB0 1--1 centre distance 38 mm, latch projection 13,5 mm 0066813380XB0 1-1

centre distance 28 mm, latch projection 3,5 mm 0066803280XB4 5-5 centre distance 28 mm, latch projection 13,5 mm 0066813280XB4 5-5 centre distance 38 mm, latch projection 3,5 mm 0066803380XB4 5-5 centre distance 38 mm, latch projection 13,5 mm 0066813380XB4 5-5

On request

R D

4-46 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 double bitted

602D Series. Only deadbolt 4 throws, three locking points, zinc-plated. 3 KEYS + 1 FOR LATCH AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 0060203280201 1-1 centre distance 28 mm, latch projection 13,5 mm 0060213280201 1--1 centre distance 37 mm, latch projection 3,5 mm 0060203370201 1-1 centre distance 37 mm, latch projection 13,5 mm 0060213370201 5-5

On request

KN C K K1 K2 H D

608D Series Deadbolt 4 throws and latchbolt, reversible, three locking points, zinc-plated. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 3,5 mm 0060803280001 1-1 centre distance 28 mm, latch projection 13,5 mm 0060813280001 1-1 centre distance 37 mm, latch projection 3,5 mm 0060803370001 1-1 centre distance 37 mm, latch projection 13,5 mm 0060813370001 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 3,5 mm 0060803280105 5-5 centre distance 28 mm, latch projection 13,5 mm 0060813280105 5-5 centre distance 37 mm, latch projection 3,5 mm 0060803370105 5-5 centre distance 37 mm, latch projection 13,5 mm 0060813370105 5-5 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 0060803280201 1-1 centre distance 28 mm, latch projection 13,5 mm 0060813280201 1-1 centre distance 37 mm, latch projection 3,5 mm 0060803370201 1-1 centre distance 37 mm, latch projection 13,5 mm 0060813370201 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 0060803280205 5-5 centre distance 28 mm, latch projection 13,5 mm 0060813280205 5-5 centre distance 37 mm, latch projection 3,5 mm 0060803370205 5-5 centre distance 37 mm, latch projection 13,5 mm 0060813370205 5-5 On request

KN C K K1 K2 Z H D

608D - 73 Series Deadbolt 4 throws and latchbolt, reversible, three locking points, zinc-plated, backset 73 mm. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 3,5 mm 0060803280071 1-1 centre distance 28 mm, latch projection 3,5 mm 0060803280075 5-5 centre distance 37 mm, latch projection 3,5 mm 0060803370071 1-1 centre distance 37 mm, latch projection 3,5 mm 0060803370075 5-5 On request

KN C K K1 K2 Z H D

4-47 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 double bitted

608D - 89 Series. Deadbolt 4 throws and latchbolt, reversible three locking points, zinc-plated, back-set 89 mm, with cage nuts 3 KEYS centre distance 37 mm, latch projection 5 mm 0060805370081 1-1 centre distance 37 mm, latch projection 5 mm 0060805370085 5-5

On request

KN C K K1 K2 Z H

612D Series Only deadbolt 4 throws, three locking points, front plate in steel, chrome-plated, zinc-plated. 3 KEYS 50.01.10 + 1 TWO THROWS centre distance 28 mm, latch projection 0,5 mm 0061200280201 1-1 centre distance 37 mm, latch projection 0,5 mm 0061200370201 1--1 On request

KN C K K1 K2 H

618D Series Bolt 4 throws and reversible latch, three locking points, forend in steel, chrome-plated, zinc-plated. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 0,5 mm 0061800280001 1-1 centre distance 37 mm, latch projection 0,5 mm 0061800370001 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 0,5 mm 0061800280105 5-5 centre distance 37 mm, latch projection 0,5 mm 0061800370105 5-5 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 0,5 mm 0061800280205 5-5 centre distance 37 mm, latch projection 0,5 mm 0061800370205 5-5 On request

KN C K K1 K2 H Z

602DF Series. Only bolt 4 throws, three locking points, zinc-plated. 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 00602032802F1 1-1 centre distance 28 mm, latch projection 13,5 mm 00602132802F1 1-1 centre distance 38 mm, latch projection 3,5 mm 00602033802F1 1-1 centre distance 38 mm, latch projection 13,5 mm 00602133802F1 1-1

On request

KN C K K1 K2 H D

4-48 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 double bitted

608DF Series Deadbolt 4 throws and latchbolt, reversible, three locking points, zinc-plated. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 3,5 mm 00608032800F1 1-1 centre distance 28 mm, latch projection 13,5 mm 00608132800F1 1-1 centre distance 38 mm, latch projection 3,5 mm 00608033800F1 1-1 centre distance 38 mm, latch projection 13,5 mm 00608133800F1 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 3,5 mm 00608032801F5 5-5 centre distance 28 mm, latch projection 13,5 mm 00608132801F5 5-5 centre distance 38 mm, latch projection 3,5 mm 00608033801F5 5-5 centre distance 38 mm, latch projection 13,5 mm 00608133801F5 5-5 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 00608032802F1 1-1 centre distance 28 mm, latch projection 13,5 mm 00608132802F1 1-1 centre distance 38 mm, latch projection 3,5 mm 00608033802F1 1-1 centre distance 38 mm, latch projection 13,5 mm 00608133802F1 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 3,5 mm 00608032802F5 5-5 centre distance 28 mm, latch projection 13,5 mm 00608132802F5 5-5 centre distance 38 mm, latch projection 3,5 mm 00608033802F5 5-5 centre distance 38 mm, latch projection 13,5 mm 00608133802F5 5-5

On request

KN C K K1 K2 H D

602DF Series Only deadbolt 4 throws, three locking points, front plate in steel, chrome-plated, zinc-plated. 3 KEYS 50.01.10 + 1 TWO THROWS centre distance 28 mm, latch projection 0,5 mm 00612002802F1 1-1 centre distance 38 mm, latch projection 0,5 mm 00612003802F1 1-1

On request

KN C K K1 K2 H

618DF Series Deadbolt 4 throws and reversible latchbolt, three locking points, front plate in steel, chrome-plated, zinc-plated. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 0,5 mm 00618002800F1 1-1 centre distance 38 mm, latch projection 0,5 mm 00618003800F1 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 0,5 mm 00618002801F5 5-5 centre distance 38 mm, latch projection 0,5 mm 00618003801F5 5-5 3 KEYS 50.01.10 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 28 mm, latch projection 0,5 mm 00618002802F1 1-1 centre distance 38 mm, latch projection 0,5 mm 00618003802F1 1-1 On request

KN C K K1 K2 H 4-49 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 combined (multi-function)

608DP Series Main lock: four throws and latchbolt, 40 mm excursion Service lock: two throws and latchbolt, independent. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 3,5 mm 006080328P001 1-1 centre distance 28 mm, latch projection 13,5 mm 006081328P001 1-1 centre distance 37 mm, latch projection 3,5 mm 006080337P001 1-1 centre distance 37 mm, latch projection 13,5 mm 006081337P001 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 3,5 mm 006080328P105 4-4 centre distance 28 mm, latch projection 13,5 mm 006081328P105 4-4 centre distance 37 mm, latch projection 3,5 mm 006080337P105 4-4 centre distance 37 mm, latch projection 13,5 mm 006081337P105 4-4 On request

KN C K K1 K2 H D B L X I

618DP Series. Main lock: four throws and latchbolt, 40 mm excursion, chrome plated front plate. Service lock: two throws and latchbolt, independent. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 0,5 mm 006180028P001 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 0,5 mm 006180028P105 4-4 On request

KN C K K1 K2 H B L X I

608DFP Series. Main lock: four throws and latchbolt, 40 mm excursion. Service lock: two throws and latchbolt, independent. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 3,5 mm 006080328P0F1 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 3,5 mm 006080328P1F5 4-4 On request

KN C K K1 K2 H B L X I D

618DFP Series. Main lock: four throws and latchbolt, 40 mm excursion, chrome plated front plate. Service lock: two throws and latchbolt, independent. 3 KEYS 50.01.10 centre distance 28 mm, latch projection 0,5 mm 006180028P0F1 1-1 3 KEYS 50.01.10 + 1 FOR LATCHBOLT centre distance 28 mm, latch projection 0,5 mm 006180028P1F5 4-4 On request

KN C K K1 K2 H B L X I

4-50 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 combined (multi-function)

668GP Series, gears motion. Main lock: bolt and latch, 30 mm excursion. Service lock: two throws and latch, independent. centre distance 28 mm, latch projection 3,5 mm 006680328PG04* 4-4 centre distance 28 mm, latch projection 13,5 mm 006681328PG04 4-4 centre distance 37 mm, latch projection 3,5 mm 006680337PG04 4-4 centre distance 37 mm, latch projection 13,5 mm 006681337PG04 4-4

On request

B L X D I J

678GP Series, gears motion. Main lock: deadbolt and latchbolt, 30 mm excursion, chrome plated front plate. Service lock: two throws and latchbolt, independent. centre distance 28 mm, latch projection 0,5 mm 006780028PG04 4-4 centre distance 37 mm, latch projection 0,5 mm 006780037PG04 4-4

On request

B L X I J

668GFP Series, gears motion. Main lock: deadbolt and latchbolt, 30 mm excursion. Service lock: two throws and latchbolt, independent. centre distance 28 mm, latch projection 3,5 mm 006680328PGF4* 4-4 centre distance 28 mm, latch projection 13,5 mm 006681328PGF4 4-4 centre distance 38 mm, latch projection 3,5 mm 006680338PGF4 4-4 centre distance 38 mm, latch projection 13,5 mm 006681338PGF4 4-4

On request

B L X D F I J

678GFP Series, gears motion. Main lock: deadbolt and latchbolt, 30 mm excursion, chrome plated front plate. Service lock: two throws and latchbolt, independent. centre distance 28 mm, latch projection 0,5 mm 006780028PGF4 4-4

On request

B L X F I J

* INOX VERSION ON REQUEST

4-51 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 with Anti-Pick Latch NEW

Serie 668G. Latch and deadbolt, rim, E.63 centre distance 28 mm, latch projection 3,5 mm 0066403280G00 1-1 centre distance 28 mm, latch projection 13,5 mm 0066413280G00 1-1 centre distance 37 mm, latch projection 3,5 mm 0066403370G00 1-1 centre distance 37 mm, latch projection 13,5 mm 0066413370G00 1-1 centre distance 28 mm, latch projection 3,5 mm 0066403280G04 5-5 centre distance 28 mm, latch projection 13,5 mm 0066413280G04 5-5 centre distance 37 mm, latch projection 3,5 mm 0066403370G04 5-5 centre distance 37 mm, latch projection 13,5 mm 0066413370G04 5-5 On request

D J Serie 668G. Latch and deadbolt, mortise with faceplate, E.63 centre distance 28 mm, latch projection 0,5 mm 0067400280G00 1-1 On request

D J Serie 668G. Latch and deadbolt, rim, E.73 centre distance 28 mm, latch projection 3,5 mm 0066403280G70 1-1 centre distance 37 mm, latch projection 3,5 mm 0066403370G70 1-1 centre distance 28 mm, latch projection 3,5 mm 0066403280G74 5-5 centre distance 37 mm, latch projection 3,5 mm 0066403370G74 5 -5 On request

D J

Serie 668GF. Latch and deadbolt, rim, E.63 centre distance 28 mm, latch projection 3,5 mm 0066403280GF0 1-1 centre distance 28 mm, latch projection 13,5 mm 0066413280GF0 1-1 centre distance 38 mm, latch projection 3,5 mm 0066403380GF0 1-1 centre distance 38 mm, latch projection 13,5 mm 0066413380GF0 1-1 centre distance 28 mm, latch projection 3,5 mm 0066403280GF4 5-5 centre distance 28 mm, latch projection 13,5 mm 0066413280GF4 5-5 centre distance 38 mm, latch projection 3,5 mm 0066403380GF4 5-5 centre distance 38 mm, latch projection 13,5 mm 0066413380GF4 5-5 On request

D J Serie 668GF. Latch and deadbolt, mortise with faceplate, E.63 centre distance 28 mm, latch projection 0,5 mm 0067400280GF0 1-1 On request

D J Serie 668GF. Latch and deadbolt, rim, E.63, with cylinder fastened from front of lock centre distance 28 mm, latch projection 3,5 mm 0066403280GB0 1-1 centre distance 28 mm, latch projection 13,5 mm 0066413280GB0 1-1 centre distance 28 mm, latch projection 3,5 mm 0066403280GB4 5-5 On request

D J

4-52 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories with Anti-Pick Latch NEW

Chrome plated steel faceplate for 668G with anti-pick latch centre distance 28 mm 10400674G0200 5-1 centre distance 37 mm 10400674G0300 5-1

*

Chrome plated steel faceplate for 668GF with anti-pick latch centre distance 28 mm 10400674GF200 5-1 centre distance 38 mm 10400674GF300 5-1

Chrome plated steel faceplate for 668GF with anti-pick latch and cylinder fastener screw hole centre distance 28 mm 10400674GB200 5-1

Electric strike for 664G with anti-pick latch RIGHT - centre distance 28 mm 20028E60412V1 1-1 LEFT - centre distance 28 mm 20028E60412V2 1-1 RIGHT - centre distance 37 mm 20037E60412V1 1-1 LEFT - centre distance 37 mm 20037E60412V2 1-1

Electric strike for 664GF with anti-pick latch RIGHT - centre distance 28 mm 20028E60412V2 1-1 LEFT - centre distance 28 mm 20028E60412V1 1-1 RIGHT - centre distance 38 mm 20037E60412V2 1-1 LEFT - centre distance 38 mm 20037E60412V1 1-1

4-53 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 with Idle Handle NEW

Serie 668G. Latch and deadbolt, rim, E.63 centre distance 28 mm, latch projection 3,5 mm 0066803281G00 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813281G00 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803371G00 1-1 centre distance 37 mm, latch projection 13,5 mm 0066813371G00 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803281G04 5-5 centre distance 28 mm, latch projection 13,5 mm 0066813281G04 5-5 centre distance 37 mm, latch projection 3,5 mm 0066803371G04 5-5 centre distance 37 mm, latch projection 13,5 mm 0066813371G04 5-5 On request

D J Serie 668G. Latch and deadbolt, mortise with faceplate, E.63 centre distance 28 mm, latch projection 0,5 mm 0067800281G00 1-1 On request

D J Serie 668G. Latch and deadbolt, rim, E.73 centre distance 28 mm, latch projection 3,5 mm 0066803281G70 1-1 centre distance 37 mm, latch projection 3,5 mm 0066803371G70 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803281G74 5-5 centre distance 37 mm, latch projection 3,5 mm 0066803371G74 5 -5 On request

D J

Serie 668GF. Latch and deadbolt, rim, E.63 centre distance 28 mm, latch projection 3,5 mm 0066803281GF0 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813281GF0 1-1 centre distance 38 mm, latch projection 3,5 mm 0066803381GF0 1-1 centre distance 38 mm, latch projection 13,5 mm 0066813381GF0 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803281GF4 5-5 centre distance 28 mm, latch projection 13,5 mm 0066813281GF4 5-5 centre distance 38 mm, latch projection 3,5 mm 0066803381GF4 5-5 centre distance 38 mm, latch projection 13,5 mm 0066813381GF4 5-5 On request

D J Serie 668GF. Latch and deadbolt, mortise with faceplate, E.63 centre distance 28 mm, latch projection 0,5 mm 0067800281GF0 1-1 On request

D J Serie 668GF. Latch and deadbolt, rim, E.63, with cylinder fastened from front of lock centre distance 28 mm, latch projection 3,5 mm 0066803281GB0 1-1 centre distance 28 mm, latch projection 13,5 mm 0066813281GB0 1-1 centre distance 28 mm, latch projection 3,5 mm 0066803281GB4 5-5 On request

D J

4-54 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 600 with motorized latch

668E Series Deadolt 2 throws (30 mm excursion) and reversible latchbolt, three locking points, zinc-plated. Power supply 9V - 2,89A centre distance 28 mm, latch projection 3,5 mm 006680328E000 1-1 centre distance 37 mm, latch projection 3,5 mm 006680337E000 1-1 latch movement with electric motor 9 V

678E Series Deadolt 2 throws (30 mm excursion) and reversible latchbolt, three locking points, zinc-plated. Power supply 9V - 2,89A centre distance 28 mm, latch projection 0,5 mm 006780328E000 1-1 centre distance 37 mm, latch projection 0,5 mm 006780337E000 1-1

latch movement with electric motor 9 V

4-55 Locks for armoured doors Code package Single package Multiple Min. ord. Serie 600 Panic 4RM Mechanical anti-panic lock for armoured doors NEW Rim version Mechanical anti-panic lock PANIC 4RM compliant with EN1125/EN179 with European profile cylinder. Deadbolt in chromed steel diam. 18 mm, stroke 30 mm. Reversable latch diam. 20 mm, adjustable protrusion. Square spindle 8 mm. Suitable for fire-resistant doors. Bar attachments for additional high and low locking. Preparation of M6 through screws for cylinder protection escutcheon fixing . Rim version. For the mortice version, order the specific faceplates separately. Comes equipped with: lock, cylinder fixing screws, instructions. Comes equipped with: lock, leaf approach contact, strike plate, cylinder fixing screws, instructions. Operation From the inside: pushing the bar (EN1125) or turning the handle (EN179) retracts the latch and deadbolts. From the outside: The key operates the deadbolts and retracts the latch.

136 30 91,5 = = 3/13 63 42 max. 22 min

corsa 30 18 106 85 37 38 = = 37 8 164 4 28 28 28 52,

262 15 56 37 86 92 28 20

6,3 n.3 x M5 n.5 x corsa 15 156 65 18 min 38 max.

25 49 59

Protrusion 3, centre distances 28 00069H0328M00 1-1 Protrusion 13, centre distances 28 00069H1328M00 1-1

Protrusion 3, centre distances 37 00069H0337M00 1-1 Protrusion 13, centre distances 37 00069H1337M00 1-1

4-56 Locks for armoured doors Code singola Confezione multipla Confezione Min. ord.

Pro 4RM NEW

Panic exit bar for armoured doors Reversible activation bar PRO 4RM for PANIC 4RM locks. Square spindle 8 mm, rotation of 40° The reduced dimensions allow to use the pre-existing escutcheons of the cylinder Matching accessories to be ordered separately: Oval bar series 9459* Support plate 0000A00103

Painted BLACK 94H0000504S8 1 - 1 YES ENDUR4NCE FINISH 94H0000R04S8 1 - 1 YES Painted WHITE 94H0000404S8 1 - 1 YES Painted METAL GREY 94H0000704S8 1 - 1 YES

4-57 Locks for armoured doors Code package Single package Multiple Min. ord.

Panic 4RM - Pro 4RM Accessories

60 130 60 NEW

66,50 5xM5 7,30 Push-bar PRO 4RM fixing plate 0000A00103 10 - 10 7

20

21,50 19 93 178 255 50 171

8,30 10 3 49 108

3 35 n°4 x = = 6,2 19 = =

4 x 18,8 18,8 3 x Faceplate centre distances 28 for mechanical PANIC 4RM 10400069M2800 5-5 28 28 37 37 28 394 410 37 28

20,3

Faceplate centre distances 37 for mechanical PANIC 4RM 10400069M3700 5-5

33 5 6 x

22 3x 4 x

Strike plate centre distances 28 20000069H028N 5-5 255 28 28 28 28 1 4

24

33 0 13 13 3x 22 193 171,5 255

37 37 37 Strike plate centre distances 37 20000069H037N 5-5 20,5 17 24,7 = = 47,6 1 54 4

24 29 = =

4-58 4-59 Locks for armoured doors Serie 1120 Serie 800 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 1120

1120 Series Deadbolt 2 throws, reversible latchbolt, clutched door-knob, three locking points, zinc-plated. 5 KEYS 40.00.95 latch projection 5 mm 0000011200000 1-1 latch projection 40 mm 0000011204000 1-1 latch projection 70 mm 0000011207000 1-1

1120P Series Deadbolt 2 throws, reversible latchbolt, clutched door-knob, three locking points, service lock (3 throws), zinc-plated. 5 KEYS 40.00.95 latch projection 5 mm 0000011200005 1-1 latch projection 40 mm 0000011204005 1-1 latch projection 70 mm 0000011207005 1-1

1120PV Series Deadbolt 2 throws, reversible latchbolt, clutched door-knob, three locking points, service lock, changeable key with 7 levers and check-up adjustment, 3 throws, zinc-plated. 5 KEYS 38.11.90 + 1 FOR CONSTRUCTION SITE latch projection 5 mm 0000011200015 1-1 latch projection 40 mm 0000011204015 1-1 latch projection 70 mm 0000011207015 1-1

1120C Series Deadbolt 2 throws, reversible latchbolt, clutched door-knob three locking points, zinc-plated, with anti-manipulation system. latch projection 5 mm 0000011200020A 1-1 latch projection 40 mm 0000011204020A 1-1 latch projection 70 mm 0000011207020A 1-1

1120CP Series Deadbolt 2 throws, reversible latchbolt, clutched door-knob, three locking points, service lock (3 throws), zinc-plated with anti-manipulation system. latch projection 5 mm 0000011200025A 1-1 latch projection 40 mm 0000011204025A 1-1 latch projection 70 mm 0000011207025A 1-1

4-61 Locks for armoured doors Code package Single package Multiple Min. ord.

Serie 800

801 Series Only deadbolt 4 throws, threaded deadbolts M6, three locking points, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCH AND TWO THROWS centre distance 76 mm, latch projection 2 mm 0000008010200 1-1

802 Series Only deadbolt 4 throws, three locking points, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCH AND TWO THROWS centre distance 38 mm, latch projection 5 mm 0000008020500 1-1 centre distance 38 mm, latch projection 8 mm 0000008020800 1-1 centre distance 38 mm, latch projection 40 mm 0000008024000 1-1

808 Series Bolt 4 throws and reversible latchbolt, three locking points, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCH AND TWO THROWS centre distance 38 mm, latch projection 5 mm 0000008080500 1-1 centre distance 38 mm, latch projection 8 mm 0000008080800 1-1 centre distance 38 mm, latch projection 40 mm 0000008084000 1-1

808P Series Deadbolt 4 throws and reversible latchbolt, service lock (3 throws and latchbolt), three locking points, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCH AND TWO THROWS centre distance 38 mm, latch projection 5 mm 0000008080505 1-1 centre distance 38 mm, latch projection 8 mm 0000008080805 1-1 centre distance 38 mm, latch projection 40 mm 0000008084005 1-1

811 Series Deadbolt 4 throws and reversible (3 throws and latchbolt), three locking points, front plate in steel, chrome-plated, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCH AND TWO THROWS centre distance 38 mm, latch projection 2 mm 0000008110000 1-1

4-62 Locks for armoured doors Code singola Confezione multipla Confezione Min. ord.

Serie 800

811 Series Deadbolt 4 throws and reversible latchbolt, three locking points, service lock (3 throws and latch), front plate in steel, chrome-plated, zinc-plated. 5 KEYS 39.00.90 + 1 FOR LATCHBOLT AND TWO THROWS centre distance 38 mm, latch projection 2 mm 0000008110005 1-1

861 Series Only deadbolt 3 throws, M6 screwed bolts, three locking points, zinc-plated. centre distance 76 mm, latch projection 2 mm 0000008610200 1-1

868 Series Deadbolt 3 throws and reversible latchbolt, three locking points, zinc-plated. centre distance 38 mm, latch projection 5 mm 0000008680500 1-1 centre distance 38 mm, latch projection 8 mm 0000008680800 1-1 centre distance 38 mm, latch projection 40 mm 0000008684000 1-1

868P Series Deadbolt 3 throws and reversible latchbolt, service lock (3 throws and latchbolt), three locking points, zinc-plated. centre distance 38 mm, latch projection 5 mm 0000008680505 1-1 centre distance 38 mm, latch projection 8 mm 0000008680805 1-1 centre distance 38 mm, latch projection 40 mm 0000008684005 1-1

4-63 Locks for armoured doors Code package Single package Multiple Min. ord.

Electric strikes

Electric strike with release lever for temporary disengagement (hold open function). Automatic anti-closure device (anti-repeater). Power supply 6-12V. Right 20000E60112V1 1-1 Left 20000E60112V2 1-1

Electric strike with release lever for temporary disengagement (hold open function). Automatic anti-closure device (anti-repeater). Power supply 6-12V. Chrome plated front plate. 600 series locks G/D/GP/DP Right, centre distance 28 mm 20028E60012V1 1-1 Left, centre distance 28 mm 20028E60012V2 1-1 Right, centre distance 37 mm 20037E60012V1 1-1 Left, centre distance 37 mm 20037E60012V2 1-1

Electric strike with release lever for temporary disengagement (hold open function). Automatic anti-closure device (anti-repeater). Power supply 6-12V. Chrome plated front plate. 600 series locks GF/DF/GFP/DFP Right, centre distance 28 mm 20028E60012V2 1-1 Left, centre distance 28 mm 20028E60012V1 1-1 Right, centre distance 37 mm 20037E60012V2 1-1 Left, centre distance 37 mm 20037E60012V1 1-1

4-64 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories for locks

ONE - Escutcheons and cylinders protection in tempered steel, included fixing screw M6. latch projection 24 mm - BLACK VARNISHED 0000098014624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098024624 10 - 10 latch projection 24 mm - SATIN CHROME 0000098034624 10 - 10 latch projection 24 mm - POLISHED CHROME 0000098044624 10 - 10

EKOS - Escutcheons and cylinders protection in zinc alloy with anti-drill balls, setting system. latch projection 24 mm - POLISHED CHROME 0000098114624 10 - 10 latch projection 24 mm - POLISHED BRASS VARNISHED 0000098124624 10 - 10 latch projection 24 mm - SATIN CHROME 0000098134624 10 - 10 latch projection 24 mm - BRONZE PLATED 0000098144624 10 - 10 Spacer - projection 5 mm 0000098460005 10 - 10 Anti-snatch spacer - projection 5 mm 0000098550006 10 - 10

Escutcheons and cylinders protection in tempered steel, internal escutcheon in nylon and fixing screw included. latch projection 16 mm - NICHEL MATT 0000098050204 6-6 latch projection 16 mm - BLACK VARNISHED 0000098050205 6-6 latch projection 16 mm - POLISHED BRASS VARNISHED 0000098050206 6-6 latch projection 12 mm - NICHEL MATT 0000098050104 6-6 latch projection 12 mm - BLACK VARNISHED 0000098050105 6-6 latch projection 12 mm - POLISHED BRASS VARNISHED 0000098050106 6-6

Escutcheons and cylinders protection in tempered steel. For 800 Series - POLISHED BRASS VARNISHED 0000098030120 10 - 10

Set of escutcheons, cylinder protection included. For item 868 P - POLISHED BRASS VARNISHED 0000098035868 5-5

Set of escutcheons, cylinder protection included. For item 1120 CP - POLISHED BRASS VARNISHED 0000098035120 5-5

4-65 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories for locks

Universal oval single escutcheons 81x67 mm made of a nylon base, brass cover and mounting screws. BRONZE PLATED 0000098N0XBRO 1-1 POLISHED CHROME 0000098N0XCRL 1-1 SATIN CHROME 0000098N0XCRS 1-1 POLISHED BRASS VARNISHED 0000098N0XOLV 1-1 BRONZE PLATED 0000098N1DBRO 10 - 10 POLISHED CHROME 0000098N1DCRL 10 - 10 SATIN CHROME 0000098N1DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N1DOLV 10 - 10

Universal rectangular single escutcheons 78x62 mm made of a nylon base, brass cover and mounting screws. BRONZE PLATED 0000098N2XBRO 1-1 POLISHED CHROME 0000098N2XCRL 1-1 SATIN CHROME 0000098N2XCRS 1-1 POLISHED BRASS VARNISHED 0000098N2XOLV 1-1 BRONZE PLATED 0000098N2DBRO 10 - 10 POLISHED CHROME 0000098N2DCRL 10 - 10 SATIN CHROME 0000098N2DCRS 10 - 10 POLISHED BRASS VARNISHED 0000098N2DOLV 10 - 10

Set of internal and external nylon insert for double-bitted key. For 600 Series 0000098N20DMA 5-5

Nylon insert for European profile cylinder. 0000098N00CIL 10 - 10

Nylon insert for European profile cylinder, pre-arranged for knob. 0000098N00POM 10 - 10

4-66 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories for locks

Nylon insert for opening limiting device. 0000098N00LIM 10 - 10

Nylon insert for handle. 0000098N00MAN 10 - 10

Set of double escutcheons for cylinder and handle. With hole for defender ø46 compatible with European profile cylinder locks S series 600G/GF. Supplied with plastic support and metal cover, mounting screws and handle hole adapters. BRONZE PLATED 0000098L1DBRO 1-1 POLISHED BRASS VARNISHED 0000098L1DOLV 1-1 SATIN CHROME 0000098L1DCRS 1-1

Set of double escutcheons for double-bitted key and handle. Compatible with double-bitted locks series 600D/DF. Supplied with plastic support and metal cover, with mounting screws, handle hole adapters, adapters for double-bitted key. finition BRONZE PLATED 0000098L0DBRO 1-1 finition POLISHED BRASS VARNISHED 0000098L0DOLV 1-1 finition SATIN CHROME 0000098L0DCRS 1-1

Set of escutcheons for item 1120/1120 PV/1120 P. POLISHED BRASS VARNISHED 0000098010120 10 - 10

Set of escutcheons for item 800 P/808 P/811 P. POLISHED BRASS VARNISHED 0000098010800 10 - 10

4-67 Code package Single package Multiple Min. ord.

Accessories for locks

Set of escutcheons for item 1120 P. POLISHED BRASS VARNISHED 0000098015120 10 - 10

Set of escutcheons for item 868 P. POLISHED BRASS VARNISHED 0000098015868 10 - 10

Set of escutcheons for double-bitted locks, 1120 series/ 800 series/ 600 series. POLISHED BRASS VARNISHED 00000980B3608 10 - 10

Set of escutcheons for item 1120 C. POLISHED BRASS VARNISHED 00000980B3120 10 - 10

Set of escutcheons for 600 series locks. POLISHED BRASS VARNISHED 0000098608D00 10 - 10

4-68 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

Double lateral rim deviator, zinc-plated, self-locked deadbolt. latch projection 5 mm 0000001220500 5-5 latch projection 40 mm 0000001224000 5-5 latch projection 70 mm 0000001227000 5-5

Double lateral mortice deviator, front plate in steel, chrome-plated, zinc-plated self-locked deadbolt. latch projection 2 mm 0000001230000 1-1

Lateral rim deviator, zinc-plated. Right, latch projection 5 mm 0000001250501 5-5 Left, latch projection 5 mm 0000001250502 5-5 Right, latch projection 40 mm 0000001254001 5-5 Left, latch projection 40 mm 0000001254002 5-5 Right, latch projection 70 mm 0000001257001 5-5 Left, latch projection 70 mm 0000001257002 5-5

Anti-drill supporting plate. In manganese steel. For item 1120/1120 P/1120 PV. 0000099112050 10 - 10

Anti-drill supporting plate. In manganese steel. For item 1120 C/1120 CP. 0000099112020 10 - 10

Anti-drill supporting plate. In manganese steel. For item 801/808/802/808 P/808 PV. Right 0000099080801 10 - 10 Left 0000099080802 10 - 10

4-69 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

Anti-drill supporting plate. In manganese steel. For item 868/868P/861. Right 0000099086801 10 - 10 Left 0000099086802 10 - 10

132 M5 Steel supporting plate. To be matched with the reinforce plate code 99.02.608D.

216 600 G and D series locks. 000009903608D 10 - 10

132 M5 Steel supporting plate. To be matched with the reinforce plate code 99.02.608D.

216 600 GF and DF series locks. 000009903608F 10 - 10

2 Manganese steel supporting plate, with anti-snatch device. 5 For 600 G series locks. 93,5

220 Right 0000099668G01 10 - 10 Left 0000099668G02 10 - 10

132

2 Manganese steel supporting plate, with anti-snatch device. For 600 GF series locks. 220 93,5 52 Right 0000099668GF1 10 - 10 5,5 Left 0000099668GF2 10 - 10

132

2 7 Steel supporting plate, with anti-snatch device. To be matched with the reinforce plate code 99.02.608D. 171 277,5

213,5 For 600 DP series locks. Right 0000099608DP1 10 - 10 Left 0000099608DP2 10 - 10 5,5 132

2 5,5 Steel supporting plate, with anti-snatch device. To be matched with the reinforce plate code 99.02.608D. 76,5 For 600 DF series locks. 302 183 Right 0000099608FP1 10 - 10 131 Left 0000099608FP2 10 - 10

132 4-70 Locks for armoured doors Code package Single package Multiple Min. ord.

2 Accessories

5,5 Steel supporting plate, with anti-snatch device. 277,5

1205,5 93,5 For 600 GP series locks. Right 0000099668GP1 10 - 10 Left 0000099668GP2 10 - 10 132

2

5,5 Steel supporting plate, with anti-snatch device. For 600 GFP series locks.

302 Right 0000099668FP1 10 - 10 93,5 76,5 Left 0000099668FP2 10 - 10 5,5

132

50 Manganese steel support device. For 600 series locks. 60 000009902608D 10 - 10

Supporting plate In steel. For item 122. 0000099990034 20 - 20

Adjustable connecting rod in zinc-plated steel. For item 122/123/125/126. 0000099990015 20 - 20

Series of adjustable rods, 3 locking points, in zinc-plated steel. For item 600/800/1120. 0000099990201 1-1

4-71 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

Series of adjustable rods, 3 locking points, in zinc-plated steel. For item 811/811P. 0000099990101 1-1

Series of adjustable rods, for mortice locks with 5 locking points. In zinc-plated steel. For item 1120/1120 P/1120 PV/1120 C/1120 CP. 0000099990202 1-1

Terminal adjustable rods. In zinc-plated steel. For item 122/123/125/126. 0000099990019 10 - 10

Spare Lock. Two throws. For item 1120 PV. 0000031320015 2-2 KA item 1120 / 1120 0000031321000 2-2 KD item 1120 / 1120 0000031320000 2-2

Keyed Suite, sealed packaging For item 1120 PV. 5 keys 00000381190 1-1 10 keys 00000381290 1-1

Key guides equipped with screws. 600 series locks. 0000098608D01 1-1

4-72 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

Connection reversible rods set. For 600, 800, x1R series locks. 0000098010811 10 - 10

17

ø10 Connection rods set. For 600 series locks. Ambidextrous 20101668G0000 10 - 10

49

Finishing-off frame in satin brass. For item 1120/1120 C/1120 P/1120 CP/1120 PV. Ambidextrous - SATIN BRASS 2010011200000 10 - 10

Finishing-off frame in satin brass. For item 800/800 P/808/808 P/802/868/868 P. Right - SATIN BRASS 2000008000001 10 - 10 Left - SATIN BRASS 2000008080001 10 - 10 Ambidextrous - SATIN BRASS 2000008680001 10 - 10

4-73 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

356 28 28 28 28 35

37 37 37

Front plate in steel chrome-plated. For item 602D/662G. centre distance 28 mm - POLISHED CHROME 104000672G028 5-5 centre distance 37 mm - POLISHED CHROME 104000672G037 5-5

356 28 28 28 28 35

37 37 37

Front plate in steel chrome-plated. For item 608D/668G/668M (I=28). centre distance 28 mm - POLISHED CHROME 1040006080000 5-5 centre distance 37 mm - POLISHED CHROME 1040006080037 5-5

356 28 28 28 28 35

38 38 38

Front plate in steel chrome-plated. For item 602D/662G. centre distance 28 mm - POLISHED CHROME 104000672GF28 5-5 centre distance 38 mm - POLISHED CHROME 104000672GF38 5-5

Front plate in steel chrome-plated. For item 668GF/608DF/668MF (I=28). centre distance 28 mm - POLISHED CHROME 104000668GF28 5-5 centre distance 38 mm - POLISHED CHROME 104000668GF38 5-5

4-74 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

Front plate in steel chrome-plated. For item 668GB/668XB (I=28). centre distance 28 mm - POLISHED CHROME 104000668GB28 5-5

37 37 37 Front plate in steel chrome-plated. For item 668M. centre distance 37 mm - POLISHED CHROME 104000668GB37 5-5

356

38 38 38 35

Front plate in steel chrome-plated. For item 668MF. centre distance 38 mm - POLISHED CHROME 104000668XB38 5-5

356 28 28 28 28 44 35

37 37 37 44

Front plate in steel chrome-plated. For item 608D P/668G P. centre distance 28 mm - POLISHED CHROME 10400608DP028 5-5 centre distance 37 mm - POLISHED CHROME 10400608DP037 5-5

406 105 28 28 28 28 35

105 38 38 38

Front plate in steel chrome-plated. For item 608DF P/668GF P. centre distance 28 mm - POLISHED CHROME 10400608FP028 5-5 centre distance 38 mm - POLISHED CHROME 10400608FP038 5-5

4-75 Locks for armoured doors Code package Single package Multiple Min. ord.

Accessories

215 28 28 28 28 30

37 37 37

Strike plate in steel chrome-plated. For item 602D/602DF/608D/608DF/662GF/668GF 662G/668G/668M/668MF. centre distance 28 mm - POLISHED CHROME 2000006080000 5-5 centre distance 37 mm - POLISHED CHROME 2000006080037 5-5

170 30 54

Strike plate in steel chrome-plated. For item 122/123. 2000001220100 5-5

259 28 28 28 28 44 30 37 37 37 44

Strike plate in steel chrome-plated. For item 608D P/618D P/668G P/678G P. centre distance 28 mm - POLISHED CHROME 20000608DP028 5-5 centre distance 37 mm - POLISHED CHROME 20000608DP037 5-5

320 105 28 28 28 28 30

105 38 38 38

Strike plate in steel chrome-plated. For item 608DF P/618DF P/668GF P/678GF P. centre distance 28 mm - POLISHED CHROME 20000608FP028 5-5 centre distance 38 mm - POLISHED CHROME 20000608FP038 5-5

4-76

Iseo Serrature s.p.a. Via San Girolamo, 13 25055 Pisogne BS, Italy Tel. +39 0364 8821 Fax +39 0364 882263 [email protected] iseo.com 01_2021 Non-contractual document. Subject to change. Images are for illustrative purposes only.