“Horst Auction Center” Winter, 2020, Sale Saturday, February 8, 2020 – 9:00 AM Preview Times: Friday February 7 – 1:00 PM till 5:00 PM (All lots are pictured for your review on our web site – www.horstauction.com – and at the Auction Center.)

1. Tray lot assorted auto & : 2 – Ford wrenches (1 – adjustable), G; 7 – assorted wooden handle screwdrivers, various makers, G 2. 5 – Assorted : late, Black Diamond, 10” , Vg; unsigned 6 ¼” sag back , G; rope maker’s fid; wooden rounding , G; unsigned wooden shave, G 3. 9 – Assorted spiral operated screwdrivers, G-Vg 4. Tray lot assorted measuring devices, F.-Vg: 3 – stiff-joint outside calipers; unsigned 7” spring-joint outside; 2 – Pexto winged calipers; etc. 5. Tray lot spiral operated tools, G-Vg: 8 – assorted spiral operated screwdrivers; Yankee #44 push- 6. 5 – Assorted socket handle firmer : J. Beatty, 1” barn ’s, F-G; 4 – standard, maker’s include: Sheldon; Buck Brothers (G-Vg) 7. Tray lot 6 – assorted tools, G: Knecht, German ball ; stiff-joint outside caliper; French, /divider; English, leather case ; etc. 8. 8 – Assorted spiral operated , various makers & model, G-Vg 9. Tray lot assorted hand tools, G-Vg: Stanley: #59 doweling ; #95 butt mortise gauge; #101 block ; 2 – push-; General #161 tap driver; etc. 10. 11 – Assorted socket handle bench/firmer chisels, G-Vg. Makers: Essex Mfg.; ; Worth; etc. 11. 4 – Assorted wooden planes, F-G: D. Malloch, Perth, 8 ½” block; Greenfield Tool, block; Mathieson, side ; 15 ¾” bridge builder’s , missing knick-blades 12. 3 – Tools: Vaughan, left hand b road hatchet, G+; hand wrought claw , new handle, Vg; unsigned cobbler’s round hammer, F 13. 5 – Assorted socket handle firmer chisels, F-Vg., Makers: J. Beatty; B. French & Co.; P&R RR (railway); Butcher 14. Tray lot assorted measuring devices, G: 3 – ; Stanley “sweetheart” #20-4 ½” try ; 2 – sliding-T ; wooden string winder; printer’s lay-out tool; etc. 15. 8 – Assorted wooden simple & complex molding planes, F-G+. Makers: Union Factory; Owasco; Sandusky Tool Co.; Ohio Tool Co; Auburn Tool Co.; etc. 16. 3 – Transitional bench planes: Sargent VBM #3411 handled block, Vg; Stanley Bailey, #26 jack, G; Sargent & Co. #3415 jack, F 17. 4 – Various braces, G-Vg: Millers Falls: #32 ratchet; Stanley Handyman #H125, ratchet; Lakeside, ratchet; unsigned #100 18. 5 – Various tang handle chisels, G: BB socket mortise, G; Weldon, socket mortise, F; 3 – bench chisels: W. Butcher; etc. 19. Greenfield Tool Co. 26” handled plank , repaired handle crack, G-G+. 20. Hand wrought 11” froe w/ round wrapped & riveted socket, G+. Marked, R.H.W. #83 21. Underhill, 3 ½” socket handle , non-matched handle, G 22. Wooden framed 26” buck w/ turn-buckle tension rod, G 23. 2 – Stanley #36 iron levels, G-Vg: 18” & 24” 24. 2 – Edge tools: J.B. Stohler (John B. Stohler, Scheafferstown, Pa.) X-branded felling w/ lower lug, G+; unsigned ’s w/ square poll, G 25. Unsigned 28” (Osage/mock orange?) bench jointer w/ W. Butcher iron, Vg

1 26. C.S. Co., 28” brass tipped adjustable level, Vg 27. 2 – 28” brass tipped wooden levels: Stanley #19 , G+; Disston & Morss, Phila. mahogany, G 28. 4 – Handsaws: Atkins #2000 “Silver Steel”, Vg; Disston & Sons: #D-18-5 ½ pt., #95-5 1/2pt., G+; Craftsman 10pt., G; 29. 2 – Warren, Pa. : Fireman’s pick hatchet, Vg; PDF (Pa. Dept. Forestry) dbl.-bit, G 30. 6 – Refinished hollow & round wooden molding planes, G+-Vg. Makers: Union Factory, H. Chapin; D.R. Barton; Shiverick; etc. 31. John Bell, Phila. 2 ½” Grecian handled molding plane w/ L. Beck (Lorenzo Beck, working 1850, in East Goshen Twp., Chester Co., Pa.) iron, refinished Vg. 32. 2 – Wooden plow planes: A&E. Baldwin, N. York, screw arm w/ fruitwood threads & knobs, refinished, Vg; signed (?) slide-arm, refinished, G+-Vg 33. 5 – Restored/refinished wooden molding planes: M. Copeland plane, missing knick-blade; W/ Laurie, quarter round; Bensen & McCall, Albany, Grecian ogee; Way & Sherman, ogee; Moon, London, edge 34. Matched pr. Hunt & Wiseman, St. Louis, Mo. #14 hollow & round wooden molding planes, refinished Vg 35. 6 – Sandusky Tool refinished wooden hollow & round molding planes, Vg. 36. 2 – Wooden refinished wedge arm plow planes, Vg: Sims, London, w/ brass capped arms & diamond inlaid caps on arms; David Bensen, Albany 37. 4 – Various tools, Vg: Stanley, #102-14” level; Bedortha Bros. #104B-12” level; Sears, Roebuck & Co. #3700 in original box, G+; Latshaw “Cobra” 24oz. framer’s claw hammer w/ screw-off multi-poll in bags, E. 38. 2 – Bench planes, Vg; Stanley Bailey #5, post WWII; Shelton 9”, pat. 914609, refinished 39. 2 – Stanley Bailey bench planes w/ blue painted deck, Vg: #6 fore w/ black painted handle & knob; #4 jack w/ stained handle & knob 40. Millers Falls #18-C, heavy frame bench , restored Vg. 41. Siegley #6-C bench , Vg 42. 3 – Various claw hammer: 20oz. straight claw, G; 2 – Cheney, 16oz. patent holder claw , G 43. 4 – Various tools: 16” nail , G+; 12” hollow pipe tongs, G; C.D. dbl.-round fuller hammer, F-G; unsigned cobbler’s round hammer, G 44. 3 – Braces: Dunlap 10” ratchet, Vg; Stanley Defiance #1253-10” ratchet, Vg; unsigned 8” metal thumbscrew brace w/ metal cap, G+ 45. 4 – Various primitive string winders, G: 2 – spool type; 1 – steam bent yoke type; 1 – H-frame 46. 8 – Various primitive shaves: 1 – unknown maker, handled tenon shave w/ dovetailed replaceable head, G+; matched set of 7 – Mixson (?) mahogany graduated hollow shaves, G-G+ 47. Tray lot assorted tools: J.H. Andrew & Co. wooden brace w/ brass push-button chuck, F; assorted early bit-stock augers, F-G; Chantrell’s Patent rosewood tool holder w/ tools, G-G+ 48. Tray lot assorted leatherworking tools, F-G (look at photo) 49. Tray lot scrapers & shaves, F-G: 3 – homemade molding scratch stocks; 4 – wooden spoke shaves; Stearns spoke shave; 2 – scrapers 50. 4 – : Staugh (Stouck) 11 ½” straight back hand wrought, G; European (?) 9 ½” stop chamfer w/ key & steer head tool strikes, G; 10” W. Butcher stop chamfer, G; Randle (?) 12”, G 51. 5 – Edge tools: 3 – various corner chisels, 2 – Swan & Co.; Todd & Shaw, wooden D-, Vg; unknown maker, weather stripping plane w/ round-eye blade 52. Tray lot hand wrought & other primitive tools: wedge stop adjustable ; bull lead w/ twist eye arms; 3-arm screw driver; slating tools; etc.

2 53. 4 – Various ’s tools, G: hand wrought 6 ¾” wheel traveler w/ single strap brace; 5” two-handle open scorp; round closed-round scorp; wooden mallet 54. 3 – Primitive tools: wrought iron 7 ½” wheel traveler w/ single strap brace, pitting; D. Horn (?) (Possibly York Co.) 9 ½” cooper shave , heavy pitting P; wheelwright’s ½” gouge router, G-G+ 55. Tray lot assorted primitives: matched set of 4 – brass quilting frame clamps w/ lg. butterfly thumb screws, G+; matched set of 4 – hand wrought quilting frame C-clamps, marked D.G. Ror (*?) w/ lg. round thumbscrew, G; small brass C-; F. Hatten 4” adj. bicycle wrench w/ running rabbit, G; small wooden & brass wheel pulley, G. 56. 4 – Hand wrought hammers: 3 – various claw hammers, 1 – partly signed small sledge hammer, G 57. Tray lot misc. measuring devices: 7 ¼” wooden disc wheel traveler w/ red painted handle; homemade panel marking gauge w/ walnut arch wedge kept & saw blade marker, G; homemade two arm marking gauge w/ wedge stop & peg grip arms, G; 4 – cabinet maker’s bracket leg molding patterns 58. Tray lot of devices: wooden brace w/ brass push-button chuck, knurl cracked, F-G; unsigned early “egg beater” hand drill w/ 2 ¾” gear wheel & ornate molded shaft & handle, F-G; assorted auger bits F-G 59. 3 – Sash maker’s wooden planes: M. Copeland, screw arm adjustable stile molding, G+; unsigned screw arm stile molding, G; Vance (Baltimore), wedge arm sash fillister molding plane, G. 60. Tray lot 3 – various planes: Stanley Bailey #22 transitional block w/ “Liberty Bell” screw cap, G+; Birmingham Plane Co., 14” bench jack w/ lever blade adjuster, G; W. Vance, Baltimore, 5/8” side bead, G+ 61. Unmarked wooden handled wedge arm slitting plane (possibly for leather work), G. Odd form piece w/ traditional plane look, but has knife edge set in square adjustable post w/ wedge stop. The plane has arch top slide arms w/ wedge stops (some powder post beetle damage to one arm) 62. 2 – Wedge arm wooden handled grooving/plow planes: unsigned Osage orange (?) plow plane w/ top stop screws w/ Owasco Tool Co. iron, G (1 – screw damaged); Casey Kitchel & Co. panel groover w/ hand wrought iron stop screws, G 63. Tray lot assorted measuring devices, F-G: Winchester #9806-6” mahogany level; Disston & Sons, pat. 10-29-1912, 10 ¼” wooden level w/ adjustable slide pitch-end; unsigned wooden marking gauge; homemade walnut & oak gauge; 3 – assorted try-squares 64. 9 – Assorted tools, F-G.: unsigned hatchet w/ arch lower lug; leather grip screwdriver; unsigned early ball-peen hammer; Farrier’s claw; upholsterer’s tack claw; wooden cobbler’s hammer mold; etc. 65. Bemis & Call, H&T Co., 23” winged outside caliper, Vg 66. 2 – Measuring devices: D.M. Lyon, 30” rosewood level, Vg; brass 36” 3/8” expansion rule, G 67. 2 – Farm primitives: homemade hickory grain flail w/ arched yoke on top of handle & octagon flail block, Vg; Clemens Poultry Co., chicken catcher, G+ 68. Unknown, hand carved wooden paddle, Vg. (possibly boat, stirring or oven peel???) 69. 2 – Primitives: Sun-Lite Co. laundry fork w/ pat. dated cast iron head, Vg; unsigned “Store Arm” w/ two-handle clamp arm, G 70. L.S. “Jersey” shoe maker’s last w/ 5 various length heads on cast iron post that is mounted to round turned heavy block base, Vg. 71. 2 – Wooden leatherworking tools: cobbler’s three-legged bench w/ upright mounted leather hinged screw-clamp that has wooden screw & nut, G+; heavy oak leather vise w/ chamfered edges, iron butt hinge & walnut threaded peg turn-screw, G. 72. Primitive four-legged schnitzel bunk/ , G. 73. E.W. Carpenter, Lancaster, Pa. wooden 3” handled plane, damaged to ear of handle, tow hole near nose, refinished Vg. 74. Unsigned, 2 1/8” wooden complex (Grecian ogee w/ astragal bead) handled molding plane, replaced handle, G (bug holes)

3 75. John Bell, Phila. 4 ½” wide field raising plane w/ moving sole mounted fence & side rail. The handle has damaged ear. The plane has 3 ½” wide iron 76. 2 – John Bell AGT, Phila. screw arm panel tongue planes, F+-G 77. 2 – Wooden plow planes: J.T. Brown (Baltimore) wedge arm, F-G; P.A. Gladwin & Co. (Saybrook/Boston) screw arm, missing knobs 78. 2 – Wooden screw arm panel grooving planes: J. Stamm, Mt. Joy, Lanc. Co., missing iron & thread damage, G; E.W. Carpenter, Lancaster, missing iron & owner branded J. Herr Jr., G 79. 3 – Wooden tools: J.F. Gauntlet, wooden multi-sole round , Vg; unsigned, homemade wooden wedge arm tongue plane, missing fence, G; E.W. Carpenter, Lancaster, marking gauge, P 80. 2 – Planes: Stanley #50 light duty combination bead molding plane w/ blades, F-G; “Frankenized” N. Chapin (??) screw arm combination bead molding w/ unmatched center bead planes, G 81. Unsigned, 2 5/8” handled mahogany ogee plane, Vg 82. 2 – Wooden planes: Henry G. White, Phila. wedge arm panel grooving plane, owner branded J. Nees, Vg.; Homemade side double-rabbet w/ cherry bracket fence, G 83. 2 – Planes: Excelsior Cutter Metal Plane Co., low angle iron handled rabbet plane, G; Stanley Bailey #4 bench jack, F-G 84. 6 – Assorted edge tools: Stanley: #80 cabinet scraper w/ V-strike, G; #9 ¼ block Vg; #9 ½ block, G; 3 – Craftsman block plane w/ knuckle-joint caps, F-G 85. Tray lot various tools: Mogul, iron case 300lb. spring scales, G; D.W. Macker, patent 8-6-1889, caliper/gauge, parts missing (??); 3 – spiral screwdrivers, Vg: Millers Falls; Craftsman; Yankee “Handyman”; Goodell-Pratt, push drill, parts missing 86. Tray lot assorted Jeweler’s type tools: 5” anvil, Vg; E. Schulte, hand vise, Vg; small crucible, Vg; ; engraving tool; 2 – burnishing tools; Millers Falls combination tool handle w/ tools, Vg 87. 12 – Assorted firmer & carving chisels: Robt. Sorby, socket mortise w/ curved/swan’s neck, Vg; Pexto socket mortise, vg; 4 – bent shank gouge chisels, 6 – various carving chisels, G+ 88. Tray lot assorted carving chisels, G. 89. 11 – Assorted hardbound “How to” references: 4vol. set- Audels Carpenters & Builders Guide; 3 vol. set- Practical Treatise on the Steel Square; Kidder, Parker Architects’& Builder’s Handbook; The Carpenter’s Tool Chest; Hodgson, Concretes, Cements, Mortar… 90. Tray lot assorted tool catalogs: One Hundred Hardware Windows; John M. Rogers Boat, Gauge…; Dietzgen catalog #22D; K&E 41st edition; J.H. Kruse, and Mill Work; etc. 91. Large box assorted catalogs & “How-to” guides (please look for yourself, non-cataloged) 92. Stanley “sweetheart” wooden tool tray w/ sloped hinged lids on T-hinges & center tote, refinished, Vg. 93. 2 – Disston & Sons #D8 handsaws, G+-Vg: 5 ½ pt.; 8pt. 94. 6 – Assorted tools: 2 – unsigned 12” , G-G+; unsigned wooden horned block, G; 3 – various simple wooden molding planes, G 95. 6 – Assorted tools: Craftsman block plane w/ original box, vg; Red Diamond breast drill, Vg; French, planishing ball-peen hammer, vg; B&C adjustable wrench, G; 2 – combination squares, G+ 96. 2 – Stanley Bailey bench planes: #5-C jack w/ orange embossed lever cap, G+-Vg; #4 smooth jack, Vg 97. Ward’s Master Quality broad/full hewing hatchet w/ leather sheath, G+ 98. Disston & Sons, 25 ½” combination handsaw/level/square, G+ 99. Stanley Rule & Level, 13 ¾” iron level w/ W.T. Nicholson patent 5-1-1860, brass button, G+ 100. 3 – Handsaws: Atkins & Co. 24” w/ pressed-floral design handle, G; unsigned 26” combination saw/square, F+; Disston & Sons #D8-26” w/ finger hole handle, G+ 101. 7 – Assorted tailor’s squares & wooden straight rules, G-Vg 102. 4 – Edge tools: Craftsman #107-37032B block plane, G; unsigned 6” pressed steel block plane w/ cast lead frog, G; spoke shave w/ raised handles, Vg; Stanley R&L #54 spoke shave, G+

4 103. 8 – Assorted early firmer, bench, & carving chisels. Makers include: R. Compton; W. Butcher; Ward; etc. 104. 4 – Assorted tools: Bonney, adjustable parrot jaw wrench, G; Goodell-Pratt, patented spiral screwdriver, G.; Millers Falls , vg; Geiger, 3 ½” shears, Vg 105. Unsigned screw arm panel tongue w/ bone inlaid sole plates, refinished, missing iron 106. E.W. Carpenter, Lancaster, Pa. panel groover w/ moving sole mounted fence, refinished 107. 2 – Wooden molding planes: E.W. Carpenter, Lancaster (mark is possible added) 5” panel/field raising plane, missing iron & tote ear damage, refinished; Auburn Tool Co. screw arm rabbet plane, refinished 108. Tray lot: H.B., 1877, Sargent & Co. tool catalog. Unfortunately used as scrap book w/ clipping of newspapers on science & surveying, etc.; Jim Dandy #80 blow torch w/ original box; files in original boxes; etc. 109. Tray lot assorted P.B. tool guides & references. Booklets included on: Bucks Co. Light & Fire Making; Henry Mercer book, Notes on Adobe Bricks; Dietzgen Co, drawing instruments; Singer sewing machines; etc; 110. 4 – Various spiral operated tools in original boxes: Millers Falls #100 auto drill, Vg; North Bros. “Yankee” #41 push drill, Vg; Millers Falls #29X screwdriver box w/ wrong tool; Yankee #30A in wrong box 111. 7 – Assorted spiral operated screwdrivers & push-drills. Makers include: Craftsman; Goodell-Pratt; Yankee; Goodell Bros.; etc. 112. 2 – Stanley Bailey bench planes: #5 smooth jack w/ black painted handle & knob, Vg; #5-C w/ rosewood handle & cherry knob, post WWII, G-G+ 113. Tray lot assorted tools: Plumb, “Boy Scout” hatchet w/ sheath, G; Knowles & Cowles Mfg. Co., lg. engineer’s pad handle screwdriver, G; signed (?) engineer’s screwdriver, G; rosewood handle handled mitre square 114. 3 – Various planes: Stanley “Handyman” #H1205 w/ original box, E.; unsigned, round sole improved rabbet plane, Vg; Union Factory, H. Chapin, wooden toothing plane, G 115. 4 – Transitional bench planes, G: Stanley Bailey: #26 fore, cracked handle; R&L #36 handled block; #23 non-handled block; Sargent & Co. #3409 non-handled block 116. 6 – Various block planes: Stanley: #65 knuckle-joint, G+; #120, G; #118 low-angle, pressed steel, Vg; Sargent #5307 knuckle-joint, G; unsigned #75 bullnose block, Vg; Ward’s Master, G 117. 2 – Wooden screw arm plow planes: Bensen & Crannell, Albany, w/ long boxwood threads, knobs, & stops. The fence has dovetailed rosewood boxed fence, Vg; Union Factory, H. Chapin, w/ boxwood knobs, G. 118. 5 – Various wooden side bead molding planes, G-Vg. Makers include: J.W. Harron; W. Greenslade, Bristol; Wm. Boyd, Gliddon; etc. 119. 2 – Wooden molding planes: J. Kellogg & Co. screw arm plow plane w/ boxwood threads, knobs & stops, G-G+; T. Goldsmith (Phila.) ¾” dado plane, G 120. Early, Stanley R&L Bailey #3 bench jack w/ non-numbered deck, L. Bailey patent dated chip-guard, 1902-10 arch trade strike, Vg 121. Stanley #12 adjustable veneer scraper, G 122. 4 – Various planes: Stanley: #78 rabbet/fillister, G; “sweetheart” #110 block, cap chipped otherwise Vg; Union Tool #110 block plane, parts missing; Craftsman rabbet/fillister, G 123. 8 – Assorted chisels: 4 – various socket handle firmer chisels, G-G+. Makers: T.H. Witherby; Essex Mfg.; ; hand wrought 3” butt , G; 3 – gouge carving chisels, G+-Vg 124. 7 – Assorted carpenter’s chisels w/ neoprene handles, G-G+. Makers: Stanley; Millers Falls 125. 2 – Stanley planes: #78 rabbet/fillister plane w/ original box, Vg; “sweetheart” #181 improved rabbet, G+-Vg

5 126. 3 – Edge tools: N.E. Tool Works, Groton, Ct. (Ron Wilson), handled 2 ¼” skew set jack, Vg.; unsigned 4” two-handled scorp w/ turned handles, G; cooper’s homemade shave w/ 3” iron, G 127. 7 – Assorted tools, G-Vg: Hear (strike) Mfg. Co. pad handle screwdriver, G; Compass, slide rule w/ leather sheath, Vg; Stanley 6oz. tack hammer, G; hand wrought dbl.-head tack hammer (replaced handle); unsigned Stanley sliding-T bevel, Vg; #94 ¼ V-12” straight rule, Vg; Stanley #163- 2ft. four-fold wooden rule, G. 128. 5 – Assorted wooden molding planes: Wm. Goldsmith, Phila. screw arm adjustable sash molding plane, replaced screw & knob; unsigned sash molding plane w/ Albert Cooper, brand, G+; 3 – various side bead molding, G-Vg. Makers: Sandusky Tool; Mathieson; T. Philcox (Sims, London); 129. 6 – Assorted wooden molding planes, G+-Vg: unsigned Grecian ogee w/ astragal bead; 4 – various hollow & round; J. Bell, Phila. rabbet 130. 3 – Matched pairs, tongue & planes, G.: 2 pr. – Union Factory, H. Chapin) 131. 3 – Various boxed measuring devices: Enco #661-26 dial micrometer, Vg; Pittsburgh, digital micrometer, Vg; Ames cylinder gauge in wooden case, missing gauge 132. Fine, William Marples, Sheffield, “Ultimatum” brass framed rosewood infilled brace w/ (??) knurl that has Hibernia Works brass button & ivory line , Vg+ 133. Sandusky Tool Co. #132 Macassar Ebony handled plow plane w/ brass depth adjuster & side stop screw, Vg (refinished) 134. Union Factory, H. Chapin, #237 handled ivory tipped screw arm plow planes w/ fruitwood threads, knobs & stops, Vg. (refinished), minor owner strikes near maker’s strike 135. 2 – Stanley Bailey bench planes: early #5 smooth w/ unmarked sole, L. Bailey patented chip guard & arch strike circa 1902-10, G+; #26 transitional Vg 136. *restorer’s lot : 2 – Bench : unsigned, 21 ½” smooth w/ hole in tail; Fulton Tool Co. 21 ½ - C, F-G 137. 3 – Various tools: Stanley R&L #30-28” brass tipped adjustable wooden level, G+; 2 – Disston & Sons, handsaws, G 138. Tray lot 4 – various tools: pr. J. Kellogg, handled T&G plane set, G; early hand wrought “Trailblazing” axe w/ square long poll, arch lug, & narrow set tomahawk hatchet blade, pitted; shipwright’s caulking mallet w/ turned mallet head w/ iron rings, G 139. 6 – Assorted Stanley planes, G: #78 rabbet/fillister; 2 - #65 low angle blocks; 3 - #18 knuckle-joint cap blocks 140. 2 – Bench planes: Chaplin’s Improved 14 ½” fore plane, F; Union Tool Co. #7X jointer, G 141. 2 – Stanley Bailey pressed steel bench planes: #S-5 jack, G-G+; #S4 jack, cracked handle, G 142. 4 – Wooden molding planes, G-G+: 3 – moving fillisters w/ sole mounted fences: Stothert, Bath; Sargent & Co. #348; Sandusky Tool Co.; Union Factory, Chaplin-Stephens #159-1 ¼” bridge builder’s rabbet w/ off-set handle 143. 2 – Stanley pressed-steel bench planes: #S4 jack, repaired cracked handle, G-G+; #S-5 w/ “Liberty Bell” screw cap & R&L arch strike, circa 1910-12, G+ 144. 3 – Various Disston & Sons, backsaws: “made for Hammacher, Schlemmer & Co.” 10”, Vg; 12” mitre, Vg; 14” mitre, G 145. 2 – Backsaws: Colver Bros., Sheffield, 16” brass back mitre, G; signed (??) 8” tenon, F-G 146. 2 – Disston & Sons, backsaws: 12” mitre, G+; 16” mitre, Vg. 147. *restorer’s lot: 3 – Stanley (?) #12 adjustable veneer scrapers, F-G 148. 2 – Birmingham Plane Co. #101 patented jack planes. Patented by George Mosher w/ thumb-lever blade adjustment, both chipped near heel of planes 149. *restorer’s lot: 3 – various planes: Stanley #12 adjustable veneer scraper, missing iron; Stanley #78 rabbet/fillister, F; Sargent Tool Co. block plane w/ lever cap, G

6 150. 3 – Various planes: Stanley Bailey #3-C bench jack, G-G+; Sargent & Co. “Hercules” 9 ½” bench jack, G; Sargent & Co. block w/ lever cap, G+-Vg 151. 4 – Assorted small bench jack planes, P-F: 2 – Sargent 7 ½”; Fulton 7 ½”; Stanley #2 152. Stanley #45 combination molding planes w/ floral cast frame, G 153. Fulton Plane Co. combination molding plane parts (no blades & missing rods) 154. Tray lot assorted Siegley combination molding planes w/ 3 frames & assorted fences, rails, skates, etc. 155. Stanley #46 “Traut’s Patent” combination dado-plow plane w/ skew set iron. The plane is early floral cast, only 1 plane iron included, G-G+ 156. 2 – Bench planes: Union #6X fore plane, G (altered left rail at knob); Stanley #4 jack w/ orange painted lever cap, G+ 157. 6 – Various wooden planes, G-Vg: steel sole compass block, missing iron, G; 2 – coffin shaped blocks: unsigned, 5 ¼” w/ French iron; Selverick & Co. 8”; unsigned 3/8” dado, G+; Devalcourt, carriage maker’s compass/hollow; G.S. See w/ eagle strike, skew set rabbet 158. 2 – Wooden moving fillister planes w/ sole mounted fences, Vg: G. Musgrave, Lincoln w/ full dovetailed boxed edge; Greenfield Tool Co. #221 boxwood 159. 4 – Wooden molding planes: Owasco Tool Co., New York, #174 screw arm sash bar molding, Vg; 2 – window maker’s adj. meeting rail planes: Union Factory, Chapin-Stephens, Vg; Mathieson, Vg; Marten Doscher, New York, screw adjusted sash molding plane, G 160. 8 – Assorted wooden bead & side bead molding planes, F-Vg. Makers include: Wm. Souder, Phila.; Marten Doscher; J. Coughtry, New York; Sandusky; Eastburn; etc. 161. 6 – Wooden molding planes: Union Factory, H. Chapin, #125 dbl. side bead w/ full boxing; 2 – A. Mathieson, quarter-round w/ side fence; Mathieson, plane w/ brass depth stop; Ohio Tool Co. coping w/ fence; Livingston & Co., complex flat bead cluster, Vg 162. 5 – Assorted wooden complex molding planes, G-Vg.. Makers include: S.E. Farrand, Newark, NJ; J. Buck, London; Madox; D. Bensen, Albany 163. 2 – Wooden plow molding planes: A. Howland & Co., NY. screw arm handled, F-G; Buck, London, brass tipped slide-arm, F-G 164. 6 – Assorted wooden marking gauges, G-G+: Stanley: 3 - “sweetheart” #70; 3 - #61 165. 6 – Assorted edge tools: 4 – Buck Bros. wood chisels w/ neoprene handles, Vg; E.C. Atkins, cabinet scraper; A.E. Bennett Mfg. Co. adjustable scraper, G 166. 3 – Rosewood & w/ dbl. spear tipped round brass inlay, mortise gauges: A. Mathieson w/ two line brass inlay face plate, vg; 2 - James Howarth, Sheffield, oval head: 1 - w/ brass round inlay, Vg; 1 – w/ brass full plated oval head, G 167. 6 – Assorted wooden jointer’s planes, G-Vg: 2 – adjustable tongue molding w/ sole mounted fence & depth stop; Union Factory, Chapin-Stephens, T&G plane; 3 – dado planes: Sargent & Co; J. Kellogg 168. 8 – Assorted measuring devices: 3 – assorted Stanley #2 mitre squares, G-Vg; 6” infill , G; 6” brass plated wooden torpedo level, Vg; rosewood & brass marking gauge, pat. 1-15-1887, Vg; Stanley 2-arm roller marking gauge, missing stop screw, G; unsigned 2ft.-2 fold wooden rule, G. 169. 3 – Various bench jack planes: Stanley Bailey: #3, post WWII w/ Teflon adj. knob, G+; Sargent #409, G-G+; Chaplin’s Patent, 9”-C, missing knob, G 170. 9 – Assorted spoke shaves, F-G 171. 6 – Assorted transitional bench planes, F-Vg: 2 – Gage Tool Co; Chaplin’s Patent; Stanley Bailey; Sargent VBM #3408 172. Union Tool Co., #8X bench jointer plane w/ Stanley blade, G-Vg 173. 5 – Assorted Stanley measuring devices, G-Vg: #12-12” try square; #281 butt hinge marking tool; #88 siding marking gauge; #60 doweling gauge w/ original box; #90 marking gauge 174. 4 – Various Stanley block planes, G-Vg: #130 dbl.-end, Vg; 3 - #220

7 175. 4 – Various scrapers, G-Vg: S.E. Collins, pat. 5-1-06, w/ oak handle; 2 – Stanley adjustable: #82; “sweetheart” #70 reversible; W.A. Peck, #1 176. 5 – Various box scrapers: Atkins, pat. 8-30-1902, lever locked, G+; Mosher patent w/ bridle cap; Nichols Mfg. #50; Dutton Patent (?); unknown cooper’s scorp, G 177. 5 – Various block planes: 2 – Aluminum Foster (1 Kinsey) block planes, G-Vg; Millers Falls #497 w/ adj. throat, Vg; Sargent #5307 w/ knuckle-joint cap, G+; (?) #1130 dbl-end block, G 178. 8 – Assorted early screwdrivers, G-Vg: Cowle’s Hardware Co. “Superior”; B.B. Burley, Glasgow; Dunlap & Lyman; Sargent & Co.; Alden & Parkess; etc. 179. 5 – Assorted spiral operated screwdrivers & drill, G-Vg: “Yankee” #130A; Yankee “Handyman” #133H; Millers Falls: #229; #61A; “Yankee” #41 180. 5 – Various tools: 2 – ball-peen hammers, G-Vg; Millers Falls #9126-16oz. claw hammer, G+; Goldblatt, lathing hatchet, Vg; Underhill, half shingling hatchet w/ octagon poll, G 181. 4 – Various hatchets: 2 – GTW (Germantown Tool Works) lathing hatchets w/ two nail-clips, G-Vg; early trade hatchet w/ round back & oval socket, G; hand wrought tomahawk w/ full poll & tool marked cheeks on blade. The tomahawk has oval socket, G 182. 12 – Assorted late measuring devices: 4 – Stanley drill bit gauges, vg; 2 – Stearns #85 butt marking gauges, Vg; Millers Falls two-arm butt marking gauge, vg; Stanley: #93 marking gauge; #373 ½ butt marker; etc. 183. 4 – Various tools: Corporate seal dated 1913, for Churruca Company, Maine, Vg; K&E engineer’s sight level w/ gradient compass & leather sheath, G+; 2 – brass tubular coffee mills, G-G+ 184. Tray lot measuring devices: 3 – Various engineer’s sight levels, F-Vg; Charles Bruning Co. corner level in box, working (???); French, 3-tube telescope w/ leather grip & sheath; G 185. 3 – Various shaves: General #0, carriage makers’ shave (fig. 13/1, Lamond, …), replaced blade; Phila. keg shave, missing cap clamp; unmarked E. Holmes Patent tobacco cutter, Vg 186. 6 – Various shaves: 4 – various Batchelder type combination hollow/straight spoke shaves, G-G+ (1 – marked Montauk Mfg.); unsigned wooden curved shave, Vg; D.R. Barton body keg shave w/ stirrup clamp, G+ 187. 3 – Wooden shaves: unsigned keg shave w/ screw mounted chip guard on blade, Vg; Johnson (??) adjustable spoke shave w/ threaded tang & hoop top brass adjuster nuts, & brass sole plate, G; unsigned hickory cooper’s heading swift w/ steel plated sole & wooden wedge, owner strike H. Bull 188. 3 – Various coopers’ shaves: unsigned L.& I.J. White, “Jersey” type keg shave w/ stylized thumbscrews, G; unsigned solid bar handle iron keg shave w/ reverse mount cap (Flour City type??); unsigned wooden adjustable “Travisher” shave w/ threaded tang on long shallow set iron & round plate. The shave has wide wing nuts, Vg 189. 2 – Shaves: North Bros. Mfg. tobacco shave, Vg. This shave is a later version of the Elijah Holmes tobacco cutter; unsigned, transitional raise handle shave w/ cast iron screw fast clamp & wooden batwing handles. The shave has hardwood sole, Vg 190. Unsigned, wooden carriage maker’s double panel router w/ yoke shape & adjustable iron fences, Vg 191. 3 – Tools: unsigned carriage maker’s wooden handled bead molding router, F-G; wooden chair maker’s hollow spoke shave, w/ iron round plate, G+; T-handle reamer, G 192. 5 – Various scrapers, G-Vg: Dreadnaught red cast iron handle scraper, Vg; pat. 9-29-03 adjustable angle scraper; homemade shave made from sickle bar mower blade; etc. 193. dovetailed hinged lid tool box w/ brace & set of auger bits. The box has iron side tote, iron butt hinges & ornamental brass eagle lid topper, G-G+ 194. “Handy Andy” tool chest filled w/ original tools. The set was made in Poland for Skil-Craft Playthings Inc. Vg 195. Tray lot assorted measuring devices: brass 16oz. plumb bob in leather sheath; K&E ball-joint and socket transit, Vg; K&E #4236 neutral circle gauge w/ original box, Vg; Stanley aluminum torpedo

8 level, Vg (w/ original box); H.C. Goodrich, brass sewing machine tuck gauge w/ assorted patent dates, G 196. Tray lot assorted softbound & hardbound catalogs. Includes: Post Dependable Drawing Materials; Thurston Supply Co.; New York Blue; 1916, Chas. Weiland Inc. Hardware, House-furnishing Goods; etc. 197. 10 – Assorted wooden hollow/round molding planes, G-G+. Makers include: M. Crannell; E.W. Carpenter, Lancaster; W/ Vance; Union Factory, H. Chapin 198. 7 – Assorted wooden molding planes, G-G+: 5 – side bead: M. Crannell; Union Factory, H. Chapin; Sandusky; Creagh & Williams; 2 – simple molding: M. Crannell 199. 2 – Wooden screw arm sash molding plane, G+: Greenfield Tool Co. w/ full boxing & boxwood threads & knobs, G+; John M. Taber, w/ strip & wooden knobs & threaded knobs, G+ 200. 2 – Wooden planes: “Made for R. & W.C. Biddle & Co., Phila.” screw arm sash molding plane w/ boxwood threads & tapered knob, G; M. Crannell, Albany, moving fillister w/ sole mounted fence, 201. 4 – Various squares: Stanley: R&L #15-7 ½” improved, G+; 2 - #10 rosewood infill try squares, G+; Sargent rosewood & brass handle 10” try square, G+ 202. 4 – Various tools: K&E “Leroy” lettering set in original oak case, Vg; Stanley #04-059 doweling jig, Vg; unsigned aluminum fenced marking gauge, G; 16”-9pt. handsaw w/ brass split-nuts, G 203. 3 – Wooden carriage maker’s planes: Varville & Sons Ltd., T-rabbet, Vg; unsigned, handle hollow & compass round, F-G+ 204. 7 – Assorted wooden bead & side molding planes, G-Vg. Makers: Mockridge & Francis, Newark, NJ; Bensen & McCall, Albany; J.W. Farr; H. Adams & Co; Marley, New York; etc. 205. 3 – Various wooden molding planes: Gleaves, Manchester, two-iron belection, Vg; unsigned, 1 ¼” two-iron nosing plane, Vg; A. Mathieson & Son, gothic bead w/ full boxing, & brass depth stop, Vg 206. 6 – Assorted wooden dado planes, F-Vg. Makers: T. Tileston, Boston; C.W. Holden; Union Factory, H. Chapin; Union Factory, Chapin-Stephens; DeForest, Birmingham; etc. 207. 5 – Wooden simple & complex molding planes, G-Vg: 3 - R.W. Hendrickson, ogee w/ fillet; S.S. Barry, astragal bead; Ohio Tool Co. quarter round 208. 5 – Wooden joinery molding planes, G-G+: match pr. Owasco Tool Co. tongue & groove plane,; 3 – various grooving planes: M. Copeland; P. Brooks; Union Factory, H. Chapin 209. 5 – Wooden complex molding planes, F-Vg. (please look at photo for cut). Makers include: Caldwell; C.S. See, Bewley, Brooklyn; I. Sox; Griffiths, Norwich 210. Stanley Bedrock #605 bench jack w/ square top shoulders, cherry handle & knob, G (surface rust) 211. 2 – Bench planes: Sargent #710-C fore, repaired crack on rail at throat, G; Stanley R&L Bedrock #605 jack w/ arch top rails, G 212. 2 – Iron joinery planes: Sargent & Co. improved rabbet, missing fence & depth stop; Stanley #49 flip- bottom T&G plane, missing blades, G 213. 3 – Graduated, Sargent VBM reversible T&G planes, missing blades, G-Vg: 1066; 1067; 1068 214. 2 – Pattern makers’, Simplex, multi-sole round bench jacks w/ 15 various soles (only 2 – irons) 215. 3 – Various wooden marking gauges: ebony & brass mortise gauge w/ full plated oval fence & brass eye shape inlay, G; Awksworth & Fenestone, mahogany & brass slitting gauge w/ wooden butterfly stop screw, G+. The fence is arched top; J.W.W., rosewood marking gauge w/ eye shaped arm & fence, brass stop screw, Vg 216. 3 – Marking gauges: T. Turner, Sheffield, rosewood & brass mortise gauge w/ brass arm & full plated oval head, Vg; Adams & Co., Shrewsbury (??) rosewood & brass mortise gauge w/ rosewood arm & filet strip inlay oval head, G; Stanley (?) #77 mortise gauge, G. 217. Tray lot drilling devices: Acme Tool Chest #4 twist bit set w/ Swan’s German bits & T-handle, G; Robt. Marples, brass braced wooden brace w/ brass knurl, missing thumb button chuck, F+

9 218. 3 – Hand wrought tools: unsigned broad side hatchet w/ upper & lower lugs, F-G; lathing hatchet w/ full square poll & nail clip, cross-poll mortise axe w/ lower lug, F+-G 219. 3 – Hand wrought tools: A. Kern, Fleetwood, Pa. millstone pick, G+; G.W. Russ (*?) 20oz. claw hammer w/ octagon poll, G 220. 4 – Early small hand wrought claw hammers, G 221. 4 – Various tools: full shingling hatchet w/ face poll claw, G; 3 – small claw hammers (1 – Plumb “Anchor brand”) 222. 4 – Various farm primitives: field mower’s rectangular shape whetstone horn, G; 2 – Dengelstock/scythe anvils, G; hand held S-shaped vegetable chopper, G 223. Lg. tray assorted primitives: Decameter, surveyor’s chain, G; 2 – hand wrought hinged log dogs, G; hand wrought roof thatch needle (??); unknown wooden counter-weight w/ wrapped rope & hook 224. Tray lot assorted primitives: surveyor’s chain, G; 3 – hand wrought socket handle splitting wedges (2- ring topped) 225. Broom maker’s wooden screw operated vise w/ hickory T-handle, G 226. 2 – Hand wrought edge tools, P-F: unsigned center-poll posthole mortise axe, heavy pitting; C. Silvius (Conrad Silvius, 1850-1880, Lancaster, Pa.) broad squaring axe w/ upper & lower lug, chips to edge 227. W. Brady (William Brady, mid-1800’s, Mt. Joy, Lancaster Co., Pa.) right hand side broad axe w/ upper & lower lugs, Vg 228. Unsigned, double-bit posthole mortise axe w/ center cross-poll, attributed to Lancaster Co., pitted 229. 3 – Hand wrought double bit posthole axes, G. 230. Hand wrought hedging/shuttle making axe w/ hardened long bit & long poll, G. The axe has lower lug. 231. Wilcox & Co., 3” socket handle slick, G+ 232. W.R. Fox (*?), center bit posthole mortise axe w/ lower lug, G+ 233. Heldon (*?) 2 7/8” socket handle slick w/ turned cherry wood knob-topped handle, some pitting G-G+ 234. Homemade, hickory turning/ w/ turned handles, knobs, brace rod & rod turn buckle, G 235. Posthole mortise saw w/ hand wrought lever operated blade quick-release. It is hickory wood w/ mortise & tenon construction 236. Homemade, walnut & softwood turning/bow saw w/ mortised center brace & twine tension wire. The saw has oak turning knobs, G. 237. Primitive homemade, hickory & oak turning/bow saw w/ wooden turning knobs, G 238. 4 – Tools: hand wrought tinsmith’s seam bender, Vg; hand wrought crank handle seam bender, G; blacksmith’s hot splitting mallet, marked A(??); Blacksmith’s off-set hot cutting mallet, G 239. 9 – Assorted hand wrought blacksmith’s bolt & nail headers, 1 – signed H. Bear (Henry worked in Manheim Twp., near present day Oregon, Pa.), rare piece 240. 8 – Various hand wrought stone hammers: 7 – millstone double-face pick hammers, 3 – signed: (?), Phila.; S.W. Taylor (*?); Brady, Lancaster (above noted); unsigned brush hammer, F. 241. 3 – Hand wrought socket top splitting wedges (1 – w/ extensive tool decoration), G-G+ 242. 3 – Lg. rosewood & brass handle try squares: Ley & Warner, 18” w/ brass inlay rivet caps, G+; unsigned 14 ½”, G; unsigned 14 ¼”, F+ 243. Unsigned, 1852 dated, 24 ¾” handled homemade jointer w/ two turned pegs (handle & knob). The plane has extensive tool decorations on top of plane & side, and has carved maple leaves around front & rear pegs, G 244. Samuel Auxer, Lancaster, 16” double wedge fore plane. Auxer trade strike was used from 1869-1870. He continued business association to E.W. Carpenter factory until he retired 1880. This plane used a patented design by E.W. Carpenter, Vg.

10 245. 18th century or early 19th century, primitive slitting gauge w/ mortise & riveted constructed L-rail that has inlayed iron plate. The gauge has arch plate, wrought iron stop screw & riveted bracing to fence. The rail plate of fence is marked C.M. 246. 3 – Various hatchets: Fred Graven, Sheffield, round pad blade & round socket, G; unsigned tomahawk w/ triangular eye/socket, G; unsigned broad hewing hatchet w/. upper & lower lug, G 247. 2 – Chisels: signed (?) socket handle corner chisel, G; unsigned, 3” socket handle slick w/ octagon handle, heavy pitting, F-G 248. 4 – Various primitive tools: tinsmith’s bench top box stake, G; JA, hand wrought log marking mallet w/ socket wooden driver plug, G+; 8-H. double-face marking mallet w/ oval eye, G; hand wrought , G 249. 3 – Handsaws: early Disston & Sons, 12” w/ brass split-nuts, G; Columbian, 25 ¾”-10pt. w/ nib back, G; Disston & Sons, 28”-5pt. w/ nib back, Vg 250. 3 – Hatchets: cruise/marking hatchet w/ lower arch lug, G+; unsigned, belt hatchet, G; unsigned lathing hatchet w/ flared square poll, G 251. 5 – Various had wrought tools: slate splitting wedge w/ hook eye, G; 2 – plates (1 – signed Steinman. Probably, Steinman Hardware, Lancaster City); Grafting/splitting knife (??) w/ round plug handle, G; cooper’s off-set hoop driving chisel, Vg 252. 3 – Various primitive tools: “What’s it” dated 187, initialed F.E., handled Thatch roofing tool (?) hand wrought peg & was board back. The top has compass star & corner web decoration, G; dovetail constructed tiger maple pin panel marking gauge, Vg; homemade veneer scraper/smoother, G 253. 2 – Hand wrought tools: P.R. (embossed initialed) 14 ¼” Wheelwright’s knife, G+; solid plate wheel traveler w/ octagon handle, F (heavy pitting) 254. 2 – Stanley tools: #1193-24” brass bound mahogany level in homemade galvanized case, owner initialed L.H.M. on vial plates, G (hanger holes drilled through level; #71 ½ router, G+ 255. 5 pc. Hand wrought pump auger set, struck A. Kinsey (Abel Kinsey, working 1808, Little Britain Twp., Lancaster Co.), G 256. D.R. Barton, Rochester, 4” T-handle auger w/ threaded tangs on top, Vg 257. 3 – Unsigned, hand wrought pump augers, F (pitting) 258. Box lot assorted violin maker’s bending forms, end , clamps, etc. Possibly found in Lancaster Co. 259. 2 – Wooden threading blocks w/ match taps: 1st 1 ½” homemade hickory block w/ hand wrought ram’s horn nut & hand cut wooden adjuster nuts, G. 2nd 1 1/8” by H. Brown(??) w/ brass adjuster screws, & wooden peg handles, Vg 260. Unknown maker, hand crank chain gear operated beam mortising saw w/ lower clamp rail, gear operated up-down saw shaft & 11 ¾” hand crank wheel. Vg. 261. Farrier’s tool tray w/ tools & contents. The Tray has 4 – splayed iron legs, tray w/ high rod handle . The tool tray has 3 – unsigned wrought iron butteris; wood & bone handle hoof knives; hammers; tongs, etc. 262. Primitive 4-leg Schnitzel bonk/ shaving horse w/ stirrup rail clamp on two swivel arms, G. 263. 9Ft. Cabinet maker’s wooden work bench w/ metal threaded side & tail vise. The bench has additional removable side saw sharpening vise, sliding storage drawer, solid two-plank oak top w/ rear tray, heavy stretcher brace frame & dovetail framed brace rails. The side vise has brass tag attributing ownership to Charlie Froelich, 1898, & Paul D. Putt, 1935 (*?). The bench is an ideal user’s bench, Vg 264. Tray lot assorted tools: unsigned lathing hatchet w/ round grid faced poll & nickel plate, G; cobbler’s #2 round hammer w/ faced poll, Vg; 2 – Italian square hammers w/ grid faced, G

11 265. 4 – Edge tools: brass head push box scraper w/ hickory bent shank handle, Vg; wooden raise handle scraper/shave, marked G.W. Kilburn, Vg; homemade oak scraper/shave w/ iron plated sole, marked C.E. Taylor, Vg; Carriage maker’s edge rounder, G+ 266. 3 – Drilling devices: 2 – Wooden braces w/ brass thumb-button chuck: 1st inlay plated, signed Slater, Sheffield, on brass chuck, & rosewood knurl, G (crack); 2nd wooden framed w/ rosewood knurl, G. Yankee, #135A spiral screwdriver 267. 4 – Various block shaves: Boggis type brass raise handle, marked H.L. Nye w/ low angle center slot clamped iron, Vg; iron cooper’s head shave w/ blade marked C.F. Shaw, G; iron raise handle shave marked patent applied for on rear clamp plate, G.; Stanley #68 rabbet shave, G 268. 4 – Shaves: 2 – duplex shaves (hollow/straight): unsigned Bailey pat. #55,599 w/ wedge clamp, Vg; unsigned Bachelder type w/ raise handle, G; unsigned, Chamfer shave w/ bottom mount adjustable angle fences, Vg 269. 4 – Various tools: brass outside caliper w/ rosewood handled threaded set screw, Vg; shoe maker’s edge shave, marked New York, pat. 1/24/1893, G; 2 – offset shoemaker’s shaves, G. 270. 8 – Assorted adjustable wrenches: 3 – monkey type: W&B, 6 ½” w/ wooden handles, Vg; Billings, pat. 2/18/1878, 7”, G; Coe’s Patent, G; Billings & Spencer, #3 slide jaw, pat. 9/1/1903, G; Steel Craft #125, G; Cochran “Speed-nut” wrench, pat. 5/2/1916, Vg; Robert Wrench Co., spring jaw, G+ 271. 6 – Assorted iron spoke shaves, G-Vg: Stanley: #53; early #54; Seymour; Preston; & unsigned 272. 3 – Planes, F-G: Sargent #81 dbl.-edge rabbet, missing original clamp bar; Stanley: #190 & #191 improved rabbet 273. 2 – Stanley planes: #4 bench jack, G-G+ (missing knob); #148-7/8” reverse T&G, G 274. 2 – Tools: unsigned Evans Patent, iron frame compass/circle plane, w/ side set screws on adjustable arms, pat. 1/28/1862, on brass cap screw, Moulson Brothers iron, F-G; unsigned sliding arm straight edge/marking gauge, G+ 275. 3 – Various tools: CZA 48, USMC (shoe factory) ¼” numbering mallet, missing 1 – number; J.F.W. Dorman & Co., 1” numbering mallet w/ removable numbers, F-G; unsigned 16” stiff-joint lg. outside compass, G 276. 6 – Assorted measuring devices, G-Vg: unsigned mitre square; hand wrought 13” winged divider/compass w/ lg. winged set screw; 5” unsigned dbl. outside caliper; etc. 277. 2 – Small block planes: Stanley #100 ½ squirrel handled round block, Vg; Millers Falls – 4” bullnose block, Vg 278. Stanley #95 edge trimming block, pat. 5/14/1912, w/ R&L arch strike, G+ 279. Stanley #140 rabbet/block plane, Vg 280. Late, Stanley #20 circle/compass plane, Vg 281. 1950’s era, Stanley #50 combination molding plane, NIB 282. 4 – Edge tools, Vg+: Record, #A151 adjustable spoke shave; Footprint block print, altered blade for use as ; Stanley #G12-060, low angle; Stanley #G12-020 block 283. 3 – Edge tools: 4 ¾” two-handled scorp, restored, Vg; ECE 9 ½” wooden horned , Vg+; J. Dixon, wooden handle adjustable spoke plane w/ brass adjustment knobs, Vg 284. Stanley Bedrock #604 bench jack w/ arched rails & embossed lever cap, G-G+ 285. 2 – Stanley tools: Bailey #6-C bench fore, refinished G+; #386 angle fence plane gauge, Vg 286. 6 – Various shaves: 3 – graduated round single handle draw shaves, brass two handle round shave, Vg; unsigned small, cast aluminum round block shave, G; unsigned 3 ½” handled round compass block, G+ 287. A. Mathieson & Son, 10 ½” handled heavy frame mahogany infill bench jack w/ brass hinged screw cap, G+ 288. , 7 3/8” rosewood infill block w/ brass hinged screw cap, Westport Tool Co. iron, & after market mounted mahogany handle, G+-Vg

12 289. 3 – Various joinery planes: Sargent: #32 skew dado/rabbet, no blades, G+; 1 ½” improved rabbet, missing parts, G; Union #42 flip-bottom T&G, damaged clamp, F 290. 8 – Assorted block planes, P-G. (look for yourself) 291. 4 – Assorted spiral driver/drills, G-Vg. Makers: Goodell-Pratt; Goodell Bros. 292. 3 – Sargent self-setting bench jack planes, G-Vg: #708; #710; OVB #5-C 293. 4 – Various Sargent bench planes, G-Vg: #14-C; #8; #408; etc. 294. 18 – Assorted wooden joinery molding planes, , edge rabbets; rounds, etc., G-Vg. Makers: R. Nelson; W. Greenslade; Auburn Tool; Union Factory, H. Chapin; E.W. Pennell; W. Dibb; Farrand; Higgs; etc. 295. 14 – Assorted wooden molding planes, beads, side beads, small ogee, cove, etc. F-Vg. Makers: Caldwell; I. Kendall; E.W. Pennell; Union Factory, H. Chapin; W. Williams; Cooper; Stothert; etc. 296. 2 – Birmingham Tool Co. cast iron lever operated bench planes, F-G+: 14”; 8 ½” 297. Pattern maker’s multi-sole round plane w/ Stanley #5 jack frame, 6 – inter-changeable wooden soles & 6 – match plane irons, F-G. Plane irons are all L. & I.J. White 298. 8 – Assorted wooden molding planes, quarter rounds, double-bead, side beads, etc. F+-Vg. Makers include: Union Factory, H. Chapin; T. Goldsmith; Shiverick & Malcolm; Buck; D. Kimberly; etc. 299. 3 – Handsaws: unsigned 12” tenon back saw w/ open grip, G+; Spear & Jackson, 14” mitre backsaw w/ brass split-nuts, Vg; Disston & Sons, reversible double-edge, G-Vg 300. 2 – Handsaws: Geo. H. Bishop & Co. 14” reversible backsaw, Vg; Henry Disston & Sons, 15 ½” pattern maker’s saw w/ open grip handle, G+ 301. 2 – Long pattern maker’s : E.C. Atkins, 17” w/ open grip handle & nib tipped back, Vg; C.E. Jennings & Co. 17” w/ closed grip, Vg 302. 2 – Handsaws: “The Brooklyn Saw”, Metropolitan Hardware Co. 14”-10pt., G+; E.C. Atkins, 10pt. flooring saw, Vg 303. 2 – Handsaws: signed (?) 26”-8pt. w/ plastic grip, G+-Vg; “Hook-Eye”, pat. 3-27-1934, butcher’s saw, Vg. 304. 5 – Various tools: 2 – Stanley #84 wooden handle shaves, G; Davis Level & Tool Co., pat. 9-17-1867, adjustable “mantle clock” inclinometer, parts missing; 3 ¼” brass bullnose rabbet w/ mahogany wedge/handle, missing iron; fine, rosewood small D-router w/ scroll molded accent to tips, signed Lannan, missing blade otherwise Vg. 305. 4 – Various wooden marking gauges: W. Marples & Sons, Sheffield, ebony & brass slitting gauge w/ full brass plated oval fence, missing blade, G; Howarth, Sheffield, brass armed mortise gauge w/ full plated oval rosewood head, P-F; wedge arm marking, owner marked A. Merry, G; Stanley (?) #77 rosewood mortise gauge w/ brass mustache inlay plated head, pat. 10-22-1872, G+ 306. 5 – Various transitional bench planes, G-Vg: Stanley: R&L #28; R&L 15” w/ Bailey patented chip guard; Sargent VBM #3410 block; Fulton; Union #537 307. 2 – Backsaws: Crescent Co. 10” wooden backsaw, G+-Vg; Buck, 7” brass back dovetail saw w/ open grip handle & brass split-nuts, G+-vg 308. 4 – Various tools: shaft; unsigned 10” brass back tenon saw, F+-G; Harvey Peace, Brooklyn, NY., 10” tenon back saw w/ open grip & brass split nuts, G; F.A. Howard, Belfast, Me., reversible spiral screwdriver, G 309. 2 – Wooden plow planes: W. Edwards, screw arm w/ fruitwood threads, knobs & stops, G+; John Moseley & Son, London, brass tipped wedge arm, G 310. 8 – Assorted measuring tools: unsigned, Stanley mahogany & brass mortise gauge w/ patent 10-22- 1872, G; unsigned Stanley #77 mortise gauge, G; brass pitch gauge for wooden rule, marked pat. 3- 31-1891, Vg; 3 – wooden 4-fold 1ft. rules, G-Vg; Stanley R&L ivory two-fold 6” rule, F; unsigned 2ft. four-fold wooden rule, G

13 311. 3 – Wooden two-iron molding planes, Vg: D. Malloch, Perth, ogee; Lourie, high belection; Bailey, Sunderland, 1 ½” Grecian ogee, missing fillet strip 312. 3 – Complex wooden molding planes, G+-Vg: Mathieson & Son, 1 ½” Grecian ogee two-iron; 1 – blade needs altering to cut; R.W, Hendrickson, 2 1/8” flat ogee; W. Hoffman, N.York, 2 ½” flat ogee 313. 5 – Assorted wooden molding planes, G-Vg: F.E. Schmieding & Co., St. Louis, Mo. Grecian ogee; 2 - Union Factory, H. Chapin, Grecian ogee; R.W. Hendrickson, reverse ogee; Gardner & Murdoch, Boston, coping w/ fence 314. 6 – Various wooden joinery planes, G-Vg: Israel White, two-way T&G; Stothert, Perth, dado; 2 – tongue planes: Sargent & Co.; Greenfield Tool Co.; 2 – coping: Kaye, Nottingham,; W. Marples & Sons; R. Nelson, London, dovetail; 315. Tray lot assorted measuring devices, F-G (look at photo) 316. Siegley’s combination plane, parts missing, G 317. 3 – Philadelphia wooden molding planes, refinished Vg: John Veit, 7/8” dado; John Bell AGT, 7/8” dado; John Bell AGT, ½” two-way T&G 318. 2 – Refinished wooden screw arm sash bar molding planes, Vg: Geo. Burnham, Amherst, Mass. w/ boxwood threads & knobs; John Bell, Phila. w/ boxwood threads & knobs, Vg 319. 3 – Cooper’s tools, refinished, G+: Wiley & Russell Mfg. 7 ¾” wheel traveler; Stortz & Son, Phila. 5” two-handle scorp; Vg; L. & I.J. White, 5 ½” right hand chamfer knife 320. 3 – Various cooper’s edge tools: D.R. Barton, bench axe, refinished G+; 4” closed single handle scraper/scorp, refinished Vg; refinished, unsigned sun/topping plane w/ W. Butcher, iron 321. 3 – Refinished wooden planes, Vg: Z. J. McMaster, 2 ¼” round/cove; A.L. Gleason, Watertown, NY. 2” bridge builder’s rabbet w/ side mount handle; unsigned, adjustable “Witchet”/rounder plane w/ wooden threaded depth adjustment 322. 4 – Refinished smoothing block planes, Vg: unsigned circular/compass block; 2 – unsigned, horned blocks (1 – scraper); John Veit, Phila. 7 ¾” 323. 4 – Refinished drawknives, Vg: Sheldon, 6” sag back; Fulton, 8” straight back; C.T. Co. compass circular shave; unsigned spoke shave 324. John Bell, AGT, Phila. 3” Grecian ogee w/ bevel crown molding plane, refinished Vg. 325. John Bell, AGT, Phila. 2 1/2” Grecian ogee w/ bevel crown molding plane, refinished Vg 326. 2 – Wooden nosing/hollow planes, refinished Vg: Auburn Tool Co. #189-1 ½” two-iron; Greenfield Tool Co. 2” w/ W. Butcher single iron 327. 4 – Refinished wooden molding planes, Vg: Kennedy, Hartford, handled panel groover; Sandusky #61-7/8” handled dado; Sandusky #36 two-way T&G; Tileston, Boston, coping w/ fence 328. 3 – Refinished, wooden molding planes, Vg: John Bell, Phila. 1” Grecian ogee w/ bevel; John Veit, Phila. cove molding, owner marked J. Krieg; Greenfield Tool Co. #186-2” Grecian ogee w/ bevel 329. Casey & Co. 4 ¼” wide panel field raising plane w/ moving sole fence, brass side stop, refinished Vg (original strike has overstrike of J.P. Lyne & Son, Carlisle. Lyne was a coppersmith from 1820-1830, & then included hardware in 1838. Lewis Lyne joined his father’s business in Carlisle, Pa., and continued in business until 1862.) 330. 3 – Refinished wooden molding planes, Vg: homemade handled moving center bead w/ adj. sole mounted fence, marked A.M. Deckman on tail; John Bell, Phila. moving fillister w/ boxwood edge, sole mounted fence & brass side stop; G. Davis (un-noted strike) moving fillister w/ boxwood edge, sole mounted fence & brass side stop 331. 4 – Refinished, wooden smoothing planes, Vg; John Bell AGT, Phila. toothing, cracked heel; 11 5/8” handled block w/ Sandusky Tool iron; unsigned, 9” handled block; unsigned round block, marked w/ X-brand 332. 2 – Refined wooden jointer planes, Vg: John Bell, Phila. 28” handled plank jointer w/ iron button; Auburn Tool Co. 22” raise handle w/ replace Ohio Tool Co. iron

14 333. 2 – Wooden measuring devices: homemade wooden trammel point set w/ oak rail, steel tipped turned hickory torpedo shaped heads. Moving head has wedge stop, refinished Vg; Stanley #30-28” brass capped adjustable level, refinished G+ 334. 30” Wooden four-frame fellow saw w/ mortise & tenon oak frame, refinished Vg. 335. 2 – Saws, refinished Vg.: R. Crowe & Sons, Sheffield, 30” panel saw w/ brass spilt-nuts; wooden bow saw w/ hickory rails & brace, turned knobs, & twine tension wire 336. 16” Hickory four-frame fellow saw w/ wing-nut tension knob. The frame is round mortise & tenon construction 337. 2 – Handsaws, refinished Vg.: hickory frame tenon saw w/ quick-release lever & rack tension; Disston & Sons, red painted w/ turn-buckle tension rod 338. J. Brown & Co. polless carpenter’s adze, Vg 339. 2 – Handsaws: rare, O.F. Strayer, Harrisburg, “Capitol City Saw” w/ Pa. State House graphics, 26”- 11pt. Vg; Keystone “Pacemaker” 22”-11pt., G 340. 3 – Various tools, refinished G+: unsigned center poll posthole axe; 2 – T-handle augers: signed (?) 1 ¾” w/ turned walnut wood handle & diamond cap plate; 1” auger w/ P.S. & W. Co., pat. 3-20-1888 handle 341. 2 - Hand wrought tapered augers: long tapered auger w/ round wrapped hickory handle, Vg; chair maker’s taper auger w/ fined turned hickory handle, Vg 342. Unsigned, 3” socket handle slick w/ modern turned walnut wood handle, refinished Vg. 343. “Hand Made” felling axe w/ hand shaved & shaped hickory handle, owner initial carved in handle, G+ 344. Gerstner softwood machinist tool chest, refinished G+. The cabinet was originally canvas covered & has been refinished. The interior has 5 over 2 oak drawer interior. 345. 3 – Transitional bench planes, G-Vg: Stanley Bailey: #29 jointer; R&L #135 block w/ Eagle strike & Liberty Bell cap; Keen Kutter 20” jointer 346. 4 – Wooden handled shaves, G: handle maker’s hollow shave w/ steel plated sole; 2 – round shave w/ brass sole plate; unsigned box shave, cracked housing, P. 347. 9 – Assorted socket handle firmer chisels, G+-Vg: 5 – gouges: Newbould; L. & I.J. White; Buck Brothers; Marples & Son; 3 – socket mortise; 3 – straight 348. Tray lot assorted primitives: Plumb “Boy Scout” belt hatchet, G; unsigned T-handle mincing knife, G; early wooden handle screwdriver, G; pr. Union Club Special 11 ½ strap-on ice skates, G+ 349. 8 – Assorted specialty carving chisels/knives, Vg: bent shank V-gouge; 4 – bent shank gouges; bent shank lock mortise; German draw chip-carve knife 350. 4 – Assorted tools: Record #043 adj. groove plane, missing fence, G; homemade walnut bent handle , Vg; unsigned wooden marking gauge, G+; Stanley #95 butt mortise gauge, G 351. 11 – Assorted carving chisels, F-Vg: 7 – gouges; 4 – straight 352. 3 – Various cooper’s tools: signed (?) round adze, pitted G; hand wrought T-handle tap auger w/ turned hickory handle, G; Wm. Greaves & Sons bench axe, F-G 353. 4 – Various braces, P-G (look at photo) 354. 4 – Various tools: hand wrought hand vise, G; hand wrought grafting froe, G; hand wrought screwdriver w/ wooden pad handle, Vg; J.A. Roy, octagon double-head hammer, Vg 355. 5 – Various tools: hand wrought 14” winged divider/compass, G; stair-builder’s saw w/ adjustable wooden fence/stops, Vg; hand wrought slate ripper w/ nail claw on hooked grip; 2 – slating zaxe (1 – Stortz , Phila.), G-Vg 356. 4 – Various tools: Ulmer Michelstadt, tin shears w/ off-set handles, Vg; Browne, London, heavy tin shears w/ lg. “Frankenstein” lugs on pivot pin, G; shoemaker’s burnishing iron (?), by unknown maker, Vg; Morse Twist Drill & Metal Co. lg. tap & die handle, G

15 357. 4 – Various knives: R.C.K., two-handle mincing knife, G; Kauptner, T-handle glazier’s chisel/knife w/ off-set handle, G; Brades Co., pattern 176 dbl.-edge cleaver, F; hand wrought Bolo/dagger made from old file, G. 358. 3 – Various braces, G-G+: Brown & Flathers, wooden brass inlay braced w/ brass push-button chuck, rosewood knurl; Franz Becker, German ball brace w/ high turned knurl; unsigned iron frame brace w/ high turned wooden knurl 359. Tray lot assorted tools & primitives, F-Vg: F.E. Tournier, Boston, hand crank raisin seeder; Hackman & Co., Sorsakoski, 5” scraper/knife in brass housing w/ turned handle, 3 – various letter holder/stamp; hand wrought banana knife w/ wooden handle 360. 6 - Assorted measuring devices: K&E, 16oz. brass plumb bob w/ sheath, Vg; Lufkin #590G brass plumb bob w/ 6” dip gauge, G; Stanley #64 marking gauge, G; homemade coach-builder’s two-arm post type mortise gauge, marked w/ T strike, G+; homemade adjustable plough gauge/plane, G 361. 5 – Various wooden measuring devices: 25” mahogany & brass divider/compass w/ iron tip & brass chalk sleeve, Vg; pr. of trammel points, parts missing, G; L.E. Bates, 16”mahogany panel marking gauge, G+; 2 – wedge stop dbl.-arm mortise gauge (1 – w/ brass plate) 362. 3 – Adjustable wooden planes, F-G+: unsigned, European style 3-screw adjustable tongue plane w/ center set screw; J. Dennison, screw arm plow plane w/ fruitwood threads, knobs & stops; Osborne, London, brass tipped wedge arm plow plane 363. 3 – Wooden handled coachbuilder routers: double-router w/ yoke top frame, G; unsigned mahogany flat handle router, marked #313, G+; homemade fence groove router w/ brass sole plate, G 364. 10 – Assorted wooden plane, F-G+: hardwood (unknown) homemade block; 2 – homemade adjustable plow plane; etc. 365. 5 – Wooden planes: 2 – coachbuilders T-rabbet; J.M. Taber, two-blade handle sash molding, G+; Hills & Winship, moving panel tongue, missing iron; Newiger, Paris, cherry bridge builder’s narrow rabbet, Vg 366. 7 – Assorted tools, G: Stanley #51 spoke shave, G; brass cast #52 spoke shave, G+; 6” drop handle drawknife, G; T-handle slide jaw bed bolt wrench, G; unsigned shoe peg shave, G; Lawson, Sheffield, socket mortise chisel, G; Farrier’s horseshoe chisel, Vg 367. Handled panel slitting gauge w/ lg. ornamental fence that has over-sized stop screw on mortise & tenon set rail & plane handle. Gauge is missing wedge & knife, Vg 368. 3 – Various wooden measuring devices: walnut arch rail panel marking gauge, branded C.T. Beckard & W.M. Collday, G; homemade handled panel slitting gauge w/ wedge stop on oval head, walnut wood, G; octagon lumber stick w/ pewter/lead cap, cracked 369. 2 – Adze: unsigned, polless carpenter’s adze, G+; unsigned, shipwright’s pin poll dubbing adze, G 370. 2 – Pin poll adze: 1st J. Beatty (John Beatty, Pottstown, 1830-1886), re-edged, G; B&O railway marked, G+ 371. 3 – Winchester trademark planes: #3025-C bench jack, F; #3004 bench jack, cracked handle G; #3093 block, F-G 372. 3 – Keen Kutter edge tools: #K3-C bench jack, cracked handle, G-G+; #KK92 raise handle spoke shave, nickel plated, Vg; #K91 raise handle spoke shave, Vg 373. 2 – Transitional bench planes: Keen Kutter #K28-18” jointer, repaired handle ear, G+; Winchester #3050 jointer, G-G+ 374. Keen Kutter 3” socket handle slick w/ modern oak turned handle, G-Vg (owner marked W.A.R.) 375. 2 – Handsaws: adj. handle flooring saw, G-G+; meat packer’s saw, G 376. Keen Kutter reversible dbl.-edge back saw w/ 16” blade, G-G+ 377. 2 – Keen Kutter brass tipped wooden levels: 26” Vg; 30” adjustable, hanger hole, G+ 378. 3 – Keen Kutter measuring devices: 28” brass tipped, G; #KK0-24”, G+; #2545 knock-down square, Vg

16 379. 3 – Keen Kutter levels: #618-18” iron level, G+; #KK104-13 ½” wood, G+; #K93-12” brass tipped, G 380. 7 – Assorted Keen Kutter wrenches, G-Vg: 4 – 6”-10” pipe wrenches; #K95 adjustable; #50 alligator jaw; combination threader/dbl.-alligator jaw 381. 6 – Various Keen Kutter block planes, F-G+: bullnose/rabbet; #102; #220; #KK110; #KK19; #K60 low angle 382. 4 – Various Keen Kutter, “monkey” wrenches, F+-G 383. 2 – Winchester trademark edge tools: #3005 bench jack, F-G; #3070 router, Vg 384. 2 – Keen Kutter improved rabbet planes, G-Vg: #KK78; #K190 385. 5 – Various tools: Winchester trademark: 20oz. claw hammer, G; 16oz. claw hammer, F; unsigned cooper’s adze, F-G; Keen Kutter /file, Vg; Keen Kutter hardened chisel 386. 6 – Assorted Keen Kutter hammers, G-Vg: cobbler’s round; 8oz. ball-peen; 6oz. tack claw; 6oz. round poll claw; 12oz. upholsterer’s claw; Simmons 8oz. magnetic tack claw 387. 5 – Simmons, mechanical tools & assorted drill bits, G-G+: Oak Leaf, push drill; Keen Kutter: right- angle ratchet; hand drill; 12” ratchet screwdriver 388. 3 – Various tools: Keen Kutter: #KK71 router, G+; 12oz. chrome plated plumb bob in wooden case, Vg; Winchester trademark #3250 spoke shave, Vg 389. 12 – Assorted Simmons/Keen Kutter, tools: 2 – pruning shears; #150 ring ; awl; bearing tool; etc. 390. 8 – Assorted Simmons/Keen Kutter pliers type tools: 3 – nail pincers; gas pipe pliers; 2 – adj. pliers; #K45-6 nippers 391. 6 – Various Simmons/Keen Kutter tools, G-Vg: nail puller; ; saw set; saw file; #04 concrete edge rounder; lock mortise chisel/pick 392. 4 – Various Keen Kutter tools: 16oz. straight claw hammer, G; 12oz. octagon round claw hammer w/ chrome plate, G+; 2 – socket handle firmer chisels, Vg 393. 3 – Keen Kutter hatchets, F+-G: tomahawk; lathing hatchet w/ grid-faced poll; 20oz. shingling half hatchet 394. 3 – Various Keen Kutter hammers: prospector’s pick hammer, Vg; 12oz. brick hammer, F; 16oz. ball- peen, G 395. 10 – Assorted Keen Kutter wrenches, G: adj. alligator jaw; 10” adj.; 6” adj.; 2 – alligator jaw; 4 – S- grip dbl.-open end 396. Tray lot assorted Winchester drilling tools: #W310-10” ratchet brace, G; #W44 breast drill, Vg; set of 13 – spiral auger bits in canvas roll, G-Vg 397. 3 – Simmons/Keen Kutter, 4-fold wooden rules, Vg: #320-1ft. “Redline” caliper w/ arch joint; #KK660 ½-3ft. w/ brass oxbow joint, G+; #620-2ft. brass bound square joint, Vg 398. 4 – Wooden Simmons/Keen Kutter 4-fold rules: #610-2ft, G+; #680-2ft, G+; #610-2ft. “Red-line”; #K320-1ft. caliper rule, repaired 399. Winchester trademark #W7 bench jointer, G+-Vg 400. Keen Kutter #K240 scrub plane, owner initials on rail, G-G+ 401. Keen Kutter #K115 adjustable circular plane, G-Vg 402. 3 – Assorted measuring devices: Keen Kutter: triangle/mitre square, Vg.; #55 plane angle gauge, G; Winchester trademark #W0-24” wooden level, G 403. 7 – Assorted Keen measuring devices, F-Vg: 4 – assorted iron handle try squares; 2 – rosewood & brass handle try squares; 6” flush-T bevel square 404. Tray lot assorted Simmons/Keen Kutter measuring devices & tools, G: #K-85, butt mortise gauge; combination protractor; #K26 marking gauge; 6oz. plumb bob; etc. 405. 10 – Assorted wooden side bead & astragal bead molding plane, G-Vg. Makers: Owasco Tool Co.; Arthur, Edinburgh; Mathieson; Union Factory, Chapin-Stephens; John Moseley; etc.

17 406. 4 – Edge tools: 2 – Stanley planes: #79 two-way edge rabbet, made in England, Vg; #194 mat board bevel plane, Vg; iron curved heel shave, G; I.P. Hyde, edge trimmer w/ off-set handle, F 407. 4pc. set - Wm. Marples, Sheffield, broad carving gouges, Vg-E. 408. Tray lot of various tools: 11 ¾” open work cast iron level, F. (chips to corner); “Handy-boy” combination pliers/wrench, Vg.; assembled set of auger bits in homemade 2-side hinged lid case, G- Vg 409. 3 – Wooden folding rules: unsigned 3” sliding caliper rule, refinished Vg; Lufkin #771-2ft. four-fold w/ brass edge, refinished G+; Stanley #62-2ft. brass framed, refinished G+ 410. 3 – Wooden 2ft. folding rules w/ arch joints, refinished G-G+: Hooker, two-fold w/ Gunter rule; Rabone & Son, #121 four-fold architect’s; Rabone & Sons, #1577 411. 10 – Assorted wooden simple molding planes, G-G+: 2 – side bead; 5 – rabbets; halving plane; fluting plane; cove molding (various makers) 412. 4 – Various claw hammers, G-G+: tack hammer w/ socket braced handle; 3 – octagon poll framer’s hammers, 1 - Stanley (approx. 24oz) 413. 9 – Assorted firmer & bench chisels & tapered reamer, F-G., various makers 414. 4 – Assorted handsaws, F-G: 1 – Atkins w/ floral carved handle; 3 – various Disston & Sons 415. Wm. Beatty & Son, Chester, broad squaring axe w/ upper & lower lugs, pitting to reverse, G-G+ 416. W. Beatty & Son, side broad axe w/ off-set handle, crack to reverse at lower lug, F-G 417. Wm. Beatty & Son, Chester, side broad axe w/ upper & lower lugs, replaced handle 418. 3 – Assorted Disston & Sons, handsaws, G-G+ (1- #D111) 419. 3 – Mitre backsaws: 2 – Disston & Sons, 14” G-Vg; Jackson, 18” Vg 420. 2 – Disston & Sons, handsaws: “Nineteen-Forty Special” w/ train, plane & speeding auto graphics, 26”-8pt., Vg; #D23-25 ¼”-5 ½ pt., Vg 421. 2 – Axes: Kelly Works, “Red Warrior” felling axe, G; Fireman’s axe, bright red paint & 2 - finished, Vg 422. 2 – Hand wrought axes: J.B. Stohler (John Beamesdorfer Stohler, Scheafferstown, late 19th century) X-branded felling axe, G; H.H. Stricker (Henry H. Stricker, Reinholds Station/Vinemont, Pa. late 19th century) kitchen/kindling axe w/ originally hickory handle, mushrooming to butt, G+-Vg 423. 5 – Various claw hammers, G-G+: Craftsman, 12oz; Stanley: 8oz. round poll; 16oz. round poll; Millers Falls, #1416 straight claw, Vg; unsigned, 12oz. 424. 6 – Various hammers, G-Vg: 3 – rivet hammers: dbl-planishing w/ square & round head; ball-peen; upholsterer’s claw w/ steel braced handle 425. 3 – Stanley tools: #H111 ½ 16oz. claw, Vg; 2 - #H122 16oz. shingle half hatchets, G-G+ 426. Tray lot assorted brass nozzles, valves & gauge, G-Vg: Crosby Steam & Valve Co, 7” gauge, pat. 8- 28-1906; 3 – Lunckenheimer Co. brass mixing valve w/ clear windows; 1 ¾” X 4” hose nozzle; Powhatan 1 ½” X 9 ½” hose nozzle 427. Tray lot assorted brass items: approx. 4lb. plumb bob w/ steel tip, Vg; unsigned 8oz. plumb bob w/ steel tip; hinged lid match safe, G; Key-Davis #32 mine safety pin holder; brass flaring gauge set (???) 428. 4 – Wooden four-fold 2ft rules: 2 – Stanley #163 painted, Vg; Stanley #53 ½ architects w/ oxbow joint, Vg; Chapin-Stephens #61, square joint, F 429. Tray lot assorted measuring devices, G-Vg: 4 – stiff-joint outside calipers; 7 – spring-joint dividers/caliper; several straight rules; etc. 430. 2 – Side broad axes, G-G+: Dilworth, Bramman & Co. (attributed to Chester Co., Pa.), pitting; Ferres & Plumb w/ chamfered shoulders, w/ offset (non-fitted) handle, 431. 5 – Various hatchets, G: True Temper “Boy Scout” belt hatchet; American Fork & Hoe Co., 1941, U.S., military hand axe; GTW (Germantown Tool Works) shingling half hatchet; Keen Kutter embossed octagon poll shingling half hatchet (damaged handle); Kelly “The World’s Finest” octagon poll shingling half hatchet

18 432. 9 – Assorted measuring devices: twist-lock wooden marking gauge w/ octagon cam lock fence, Vg; Stanley: 2 –#25 sliding-T bevel squares, G+-Vg; #46-208 try square, Vg; unsigned rosewood & brass handle mitre square, G; Hanson PB-332H octagon plumb bob; 3 – various straight rules, G 433. Reproduction, Keen Kutter Tools horizontal sign, G+-Vg. Sign is embossed & lithograph printed by AAA Sign Co., Coitsville, Ohio 434. 8 – Assorted wooden 6ft. zig-zag folding rules, G-Vg: 3 – Lufkin, white “red end”; 2 – Malco #X266, yellow painted; 3 - Lufkin #X46F “red end” 435. 4 – Shingling half hatchets, G-Vg: 3 – octagon poll: 2 – Plumb; Philadelphia Tool Co.; 1 – round poll: Wards “Master Quality” 436. 4 – Various modern tools, Vg: 2 – Plumb, ball-peen hammers; Craftsman #187.37051 block plane; Dunlap #3Dbb bench jack 437. Tray lot assorted tools: 2 – Henry Troemner, Phila. , bronze lead casting forms, G-Vg; Trevetes, Peugot, iron threading block w/ tap, G+; assorted small wrenches 438. 5 – Various tools: Disston & Sons, 14” carcass/, Vg; 2 – keyhole saws: Disston & Sons, G; Atkins, Vg; Craftsman octagon poll shingling half hatchet, G+; Germantown Tool Co. round poll, shingling half hatchet, Vg 439. Tray lot assorted wooden boxed tools: SPI dial gauge, Vg; Browne & Sharpe Mfg. #540-6” try square; Lufkin Rule & Co. #513 depth micrometer; Cleveland #13 drill bit set, Vg; Scherr, micrometer G 440. P.S. & W. Co., #3-8” tinsmith’s bench shears, Vg 441. 4 – Various handsaws, G-G+: Disston: #D-8; “Pacemaker”; “King Philip” #42; (?) #42 442. 26” Hickory four-frame fellow saw w/ mortise & tenon construction, hand wrought ram’s horn tension nut 443. 12 – Assorted owner’s name punches (most names un-recognized), G-Vg 444. A. Nicol, brass tipped wedge arm wooden plow plane w/ 8 assorted irons, F+-G. 445. 3 – Wooden complex molding planes, refinished Vg: L. Gardner, Boston, 2 3/8” ogee w/ side mounted fence, J. Kellogg, two-iron sash bar molding plane; Young & M’Master, Auburn, 1 ½” Grecian ogee w/ bevel 446. 7 – Assorted wooden bead, multi-bead, & sm. complex molding planes, G-Vg. Makers: Jo. Euler, Providence; E. & T. Ring Co., Washington, MS; L.D.; Sandusky Tool Co; Stothert, Bath; J. Smith; A. Hunt 447. Tray lot assorted tools: 2 – “What’s it” T-handle threading taps/saws (??) w/ egg grip handles, Vg; 8 – assorted plow plane irons, G+ 448. Stratton Bros. patent 5-22-1888, 28” brass bound mahogany level, refinished Vg. 449. Goodell-Pratt, 28” brass bound mahogany level, refinished Vg 450. Brady (makers mark was probably used by both William and David, his father Lancaster & Mt. Joy - *Tannehill research) left hand side broad axe w/ upper & lower lug, replaced handle, G+ 451. Brady, Lancaster, Pa. (Wm. Brady & Sons, Lancaster City), broad squaring axe w/ upper & lower lug w/ splayed butt & chamfered shoulders, G-G+ 452. C. Hammond, Phila. , right hand side broad axe w/ upper & lower lug, G+ 453. W. Brady (Wm. Brady, Mt. Joy) wheelwright blocking axe, w/ upper & lower lugs, cleaned, Vg 454. J.B. Stohler (above noted) X-branded wheelwright’s blocking axe w/ upper & lower lug, extended butt, G+ 455. Mansfield & Lake, haystack knife, G 456. Wm. Beatty & Son, Chester, left hand side broad axe w/ flared blade, upper & lower lugs. Axe has modern off-set handle, G-G+ 457. I. Blood, Ballston, NY., carpenter’s polless adze, G+ 458. I. Blood, Ballston, NY, #7 side broad axe w/ upper & lower lugs, re-edged good for user, but heavy pitting to axe body 459. Wm. Beatty & Son, Chester, wheelwright side broad axe w/ 11 ¾” edge, Vg.

19 460. 2 – Stanley brass tipped wooden levels: #30-28” adjustable w/ V-strike, G+-Vg; #3-26” w/ V-strike, G. 461. 2 – Stanley brass tipped wooden levels: R&L #5 (3-ply)- 26 ¼”, G+; “sweetheart” #3-28” w/ round sticker label, G-G+ 462. 2 – Wooden bench planes: G. Usher (unknown) 22” handled jointer w/ button, G-Vg; homemade oak 16” jack w/ walnut handle w/ inlay screw plate w/ clamp bar, Vg 463. 2 – Broad axes: unsigned, side broad axe w/ upper & lower lugs, heavy pitting, F; Wm. Beatty & Son, Chester, Pa. Kent style axe, pitting G. (new handle) 464. 5 – Various measuring devices: C.S. Co. #289-16” wooden level, G+; 16” wooden panel marking gauge, G; unsigned rosewood & brass mortise gauge, G; Stanley #51 marking gauge, G; 12” rosewood & brass handled try square w/ brass diamond inlay, G 465. 3 – Various wooden tools: Bensen (?? Over-struck) wedge arm plow plane, wooden side depth stop screw, G; E.W. Carpenter, Lancaster, 12” marking gauge, weak strike, G; 7 ¾” brass face wooden machine level, G-G+ 466. 4 – Stanley Bailey bench jack planes, F-Vg: #3 w/ 1910 patent date, replaced handle; 3 - #4 (some replaced parts) 467. 5 – Various planes: Siegley #5-C bench jack, partially refinished, G+; Stanley #194 & #195 fiber board bevel edge planes, Vg; Millers Falls #87 block plane, G+; pattern makers 1 1/8” wide, multi- sole plane (only one sole & iron) w/ mahogany infill handle, G+ 468. 5 – Various drawknife/shaves: W. Chapman (*?) 4” cooper’s chamfer knife, marked ’75, G+; T.H. Witherby, 7 ½” sag back drawknife w/ walnut handles, G+; A.B. Johnson, shoe maker’s edge shave, G+; 2 – Stanley #28 dbl.-end rounding shaves, Vg 469. 5 – Various wooden shaves: signed (?) adjustable wooden shave w/ brass knobs & sole plate, Vg; 3 – spoke shaves, G-Vg: Flathers & Sons, Sheffield; unsigned w/ bone inlay throat plate; James Howarth, hardwood throat plate (replaced); homemade scratch stock, G 470. 3 – Various planes: #10 carriage makers’ rabbet jack, made in England, cracked handle otherwise Vg; altered Stanley #181 rabbet plane, converted for use as piano edge, look very good but still altered; Sargent #1307 block plane, G 471. 5 – Various Stanley planes: Bailey #3 jack, refinished (pitting to sole); #A18 aluminum block, w/ “sweetheart” knuckle-joint cap, G+; #60 low angle block w/ V-strike, G; #110 block, Vg; #110 block, G+ 472. 2 – Stanley bench planes: R&L Bailey #3 bench jack w/ un-numbered bed, repaired handle & lg. knob w/ arch strike circa 1902-10; Gage #G4 jack, G-Vg 473. 3 – Stanley planes: #94 cabinet maker’s shoulder rabbet plane, crack to upper arch ed cap; #81 box scraper w/ rosewood sole, F+-G; “four-square” 6 ¼” block 474. 2 – Stanley edge tools: #10 ½ carriage maker’s rabbet jack w/ adjustable throat plate, G-G+ (possible glue repair to handle; #81 box scraper. G 475. 10 – Assorted Stanley “Everlasting” socket handle wood chisels, F-Vg 476. Early, Stanley R&L, patent 4-18-1876, 7 3/8” block plane w/ “Shoe buckle” lever cap, G-G+ (chip behind blade, at throat. 477. Spiers, Ayr, 7 ½” handled infill block plane, repaired handle & nose block, G. Owner’s name engraved on cheek J. McGill, 1942. 478. Stanley Traut’s patent #143 combination bullnose plow & match plane w/ 5 cutters, refinished Vg. 479. 2 – Stanley Bedrock bench planes: #604 smooth jack w/ square top rails, chip on rail at nose, G+; “sweetheart” #604 ½ - C bench jack, w/ square top rails, owner’s initial carved into handle, G 480. Stanley Bailey #6 “heavy rail” bench fore plane, cracked rosewood handle & high knob, G-G+ 481. Unsigned, English 7 ½” infill block plane w/ brass screw cap, rail crack near nose, G

20 482. 4 – Tools: unsigned, iron straight handle drawknife, G; Oriental, 7 ¼”/42 mm oak draw block plane, Vg; Oriental, 9” skew rabbet block plane, Vg; honing/oil stone in covered oak case w/ carved bone eagle head on lid 483. Stanley #278 rabbet/fillister plane w/ original fence, G+ 484. 3 – Stanley edge tools: #39-1/2” dado plane, G+; #39-3/8” dado plane, G; #51 raise handle spoke shave, G 485. 3 – Stanley planes: #50 light duty combination plane, G; 2 - #65 low angle block planes, G-Vg 486. 2 – Planes: early Stanley #120 block plane w/ embossed star cap & 1902-10, circa arch strike, Vg 487. 4 – Various edge tools: L. Bailey, 6 ½” block w/ adj. throat & embossed screw cap, parts missing; unsigned 6 ¼” slot bottom block plane, refinished Vg; 2 – Millers Falls circular spoke shaves, G-Vg 488. 2 – Stanley planes, missing parts: #9 cabinet maker’s block (missing adjuster, ball handle & “hot dog”); #141 combination bullnose plow frame. Missing fence, blade, etc. 489. 3 – Stanley planes: #39-3/8” dado plane, missing blade, damage at front knob; “sweetheart” #18 w/ knuckle-joint cap, cracked rail; #5 ¼ “junior” jack post WWII w/ rosewood handle & high knob, hole drilled in nose, otherwise Vg 490. 10 – Assorted wooden side bead, & nosing planes, F+-G+. Makers: T.J. M’Master; John Baldwin; Bewley; J. Buck; Mathieson & Son; Barton; W. Parkes; etc. 491. 8 – Assorted wooden joinery planes (tongue & groove), G-G+. Makers: D.R. Barton; Sandusky; Tuttle, Hibbard & Co; S.S. Barry; T.J. M’Master; Mosely & Son; C. Donat 492. 7 – Assorted wooden simple & complex molding planes (look at photo), F-VG. Makers: Reed, Utica; Michael Saxby; J. Merker, Buffalo 493. 10 – assorted firmer, wood, & carving chisels, G-G+ 494. 4 – Various tools: Brady (makers mark was probably used by both William and David, his father Lancaster & Mt. Joy - *Tannehill research) broad hewing hatchet w/ upper & lower lug, G+; wooden ’s mallet w/ hardwood head, Vg; shipwright’s hickory caulking mallet w/ iron rings on turned head, refinished Vg; hand wrought 12” froe, G 495. Matched pair, John Bell AGT, Phila., wooden screw arm panel tongue & groove plane set, refinished Vg. 496. 3 – Stanley planes, G-Vg: #191 improved rabbet, G; Bailey #35 transitional jack, refinished ; Bailey #27 transitional jointer, refinished 497. 2 – Stanley planes: #12 adjustable veneer scraper w/ rosewood handle, Vg; #48 flip-bottom T&G plane, G 498. 10 – Assorted refinished tools: 2 – “monkey” adjustable wrenches: P.S. & W. Co., 10”; Coe’s Pat., 8”; Bridgeport Hardware #120 crate hatchet; nail pincers; 2 – hand wrought screwdrivers; etc. 499. 4 – Various measuring devices: D. Mivon & Clearman, boxwood & brass mortise gauge w/ full brass plated head & brass stop screw, Vg; unsigned Stanley #64 boxwood marking gauge, Vg; turned hickory string winder w/ mortise & tenon constructed top, vg; hand wrought 10 ½” winged outside divider, G 500. 9 – Assorted refinished Philadelphia wooden simple, bead, coping, etc. planes, Vg. Makers: John Bell; Israel White; J. Colton 501. 2 – Stanley edge tools: #80 box scraper w/ V-strike, G+-Vg; #48 flip-bottom T&G, Vg 502. 4 – Wooden edge tools, refinished Vg: E. Preston, carriage maker’s carriage T-rabbet compass; Master “Guarantee English ” moving sole grooving plane, homemade hickory straight router, Vg; homemade hickory D-router w/ “Mickey Mouse” compass round ears 503. 2 – Wooden devices, Vg: 16” handled slitting gauge w/ wooden stop screw on lg. fence & roller wheel on handle, branded I.L. James; 18” wedge arm trammel point set w/ 2” wide rail that has 1875, date 504. Tray lot 7 – assorted measuring devices, G-G+: unsigned 7 ½” try square; 2 – 2ft. wooden four-fold rules: Union #68P; Stanley #58; Lufkin #3551-3ft. four-fold rule; unsigned sliding-T bevel; P. Lowentraut, 7 ¼” winged dividers; homemade oak two-arm marking gauge, marked G.E. Ault

21 505. 2 – Tools: refinished, brass inlayed wooden brace w/ push-button chuck & rosewood knurl, some replaced parts; 20 ¾” wide homemade “rail style” router w/ turned knob grips, Vg 506. John Bell AGT, Phila. screw arm plow plane w/ 4 – plow irons, refinished G+ (1 – knob split & glued) The plane is owner branded J.A. Smith. 507. 2 – Wooden planes: European style screw arm plow w/ turn peg threads, left side fence w/ S-shaped nuts & interior biscuit stops. The plane has wrought iron eye screw plate adjusters, refinished, Vg; Owasco Tool, screw arm adjustable sash bar molding plane, Vg 508. 2 – Hardbound references w/ dust jackets: Woodworking Planes, Alvin Sellens, 1978; Wooden Planes in 19th Century America Vol. I, Kenneth Roberts, 2nd edition & 2nd printing, 1982, 509. Box lot assorted tool & antique references: H.B. Early American Folk Pottery; S.B.: American Wooden Planes…; A Museum of Early American Tools; etc. 510. Lg. tray lot assorted Stanley Tool literature, guides, catalogs (1970’s-80’s), references 511. Tray lot assorted antique & reproduced tool catalogs, references. catalogs include: Pease, cat. C-24 Drawing Instruments, American made; Nicholson File Company; F. Weber Co. Artist’s Materials cat. 700, 1937,; etc. 512. 3 – Various planes: Gage #G28 transitional jointer, missing iron, G; Metallic Plane Co., patented 15” bench fore w/ adjustable throat, F-G; Hayworth Patent, 18” jointer, replaced iron & chip guard, F-G 513. 8 – Assorted wooden simple, side bead, & cove molding planes, G. Makers include: Taber Plane Co; Union Factory, H. Chapman; G. Long; etc. 514. Sargent #738 handled screw arm plow plane w/ rosewood threads, knobs & stops, G 515. Unsigned, 11 ¾” hand wrought left hand side broad axe w/ hand shaped walnut handle, G+ 516. Signed (?) #3-11 ½” right side broad axe w/ upper & lower lugs, G 517. Dunlop & Madeira (Franklin Co., Pa.) 11 ½” right hand side broad axe, G. 518. Unsigned, 11 ¼” wheelwright’s right hand side broad axe w/ Eagle strike, G 519. 2 – Handsaws: Atkins, flooring saw, Vg; Craftsman stainless steel 26”-10pt., Vg 520. 2 – Early Disston handsaws: 18” Disston & Sons, w/ brass split-nuts, G; Henry Disston “serpentine strike” 28”-5 ½ pt. w/ brass split-nuts, G+-Vg 521. 2 – Hand wrought broad blocking/splitting axes, unsigned, G 522. Beatty & Sons, Chester, 9 ½” side broad axe, replaced handle, G 523. 2 – Unsigned, broad axes, G: 9” wheelwright’s blocking axe; signed (??) 11 ½” side broad axe, cleaned, G+ 524. 2 – Axes: Holland (Joseph & John Holland, 1831-1848, York Boro, Pa.) felling axe w/ lower lug, G- Vg; unsigned (Brady form) center-bit posthole mortise axe, G-Vg 525. 2 – H.H. Stricker (Henry H. Stricker, Reinholds Station/Vinemont, Pa. late 19th century) axes, G-Vg: small kitchen kindling axe; felling axe 526. Beatty, broad squaring axe w/ upper & lower lugs, G-Vg 527. 2 – Axes, G: Kelly “Finest” dbl.-bit felling axe; signed (?) miner’s axe w/ lower lug 528. C.H. Miller Hardware Co., Huntington, Pa., “Blue Juniata” dbl.-bit felling axe, Vg 529. 4 – Various measuring devices, G-Vg: Rabone & Sons, 12 1/8” open work cast iron level; L.S.S. Co. 12” open work cast iron level; 24” brass sliding fish measuring rule; Cincinnati Times Star 22” brass paper rule 530. 2 – Iron bench planes: Stanley pressed-steel, 14 1/8” fore plane w/ liberty bell screw cap, refinished; Keen Kutter #KK5-C, F (chipped rail) 531. 10 – Assorted implement/trade advertising wrenches, F-G. Makers: Unadilla Silo Co.; G.M. Co.; McCormick IH; Greenlee; Planet Jr.; Farquhar; Buckeye; Jamesway; etc. 532. 3 – Various hand planes: 2 - Craftsman 22”-C jointer, F-G; Stanley R&L #9 ½ block plane w/ nickel plated cap, G+-Vg

22 533. Tray lot assorted primitives/tools: 3 5/8” small sad iron, G; small “hobby” bench top vise, Vg; sleigh bell; signed (??) stone chisel; 3 ¼” sad iron; etc. 534. Tray lot catalogs & reference: catalogs: Lufkin No. 5; Lufkin #7 w/ Enderle Hardware Co.; Stanley #34-1948, Vg; reference: The Antique Tool Collector’s.., 2004, Ronald Barlow 535. Oak machinist 3-drawer tool chest w/ Schwinn bicycle stickers on front, sides, & interior of lift lid. The chest has lined drawers & upper compartment. It has several Schwinn bicycle trade advertising ephemera. 536. 4 – Various tools: Stanley #22 transitional bench smooth w/ “Liberty Bell” screw cap, refinished Vg; Fulton Tool Co. 20” transitional bench jointer, crack behind handle; 20” walnut & boxwood wedge stop panel marking gauge, head fence chipped at wedge throat; Alfrid 1951, lg. mechanics turn-screw Vg. 537. 6 – Assorted socket mortise chisels, F-G+. Makers: Greaves & Son; Sorby; Mapsden Brothers; etc. 538. 3 – Stanley planes: Bailey #3 bench smooth jack, post WWII, cracked knob otherwise Vg; #110 block w/ maroon paint & nickel painted cap, Vg; #98 right hand side rabbet, missing blade 539. 4 – Wooden marking gauges: rosewood & brass mortise gauge w/ full plated fence, G+; rosewood mortise gauge, chipped fence, G; 2 – wedge stop marking gauges (1 – sliding arm mortise gauge), F- Vg 540. 2 – Metal bench jointer planes: Gage self-adjusting #G6 fore, refinished (pitting to sole); Sargent #718 w/ adjustable angle knob, replaced/repaired (?) handle Vg 541. 3 – Various tools: pistol grip key-hole saw, Vg; Record #0151 adjustable spoke shave, G+; E. Preston & Sons, adjustable spoke shave, G-G+ 542. 8 – Assorted socket mortise chisels, F-G. Makers: Ibbotson & Co; Greaves; John Marsden; I. Sorby 543. 5 – Assorted drilling/screwing tools: Wards “Master Quality” pistol grip spiral screw driver, Vg; 4 – various braces, F-G. 544. Stanley #55 combination molding plane parts in wooden slide-lid box, missing molding blades, F. 545. Stanley R&L Bedrock #608 bench jointer plane w/ square top rail, w/ 1910-12 arch strike, hanger hole drilled in butt of plane 546. 2 – Wooden screw arm plow planes, G-Vg: Union Factory, H. Chapin #244 ½ fruitwood w/ long threads, knobs & stops, missing wedge w/ 7 assorted irons; Auburn Tool, damaged finial above fence 547. 2 – Stanley bench planes: “sweetheart” Bedrock #605-C bench jack, refinished (cracked rail & handle); Bailey #6-C, owner’s name engraved on side rail, G 548. 4 – Stanley various wooden levels: #104-12”, G+; “sweetheart” #102-16”, Vg; #259-9” torpedo, Vg; Defiance #1293-8 7/8” torpedo, G+ 549. 2 – Stanley #36 iron levels: 12” in original box, E; 9” w/ pat. 6-23-96, G. w/ homemade wooden case 550. Tray lot assorted tools: dbl.-claw hammer, F; wooden brace w/ brass push-button chuck, brass inlay bracing & rosewood knurl, F-G; 2 – wooden casting forms w/ maker’s name Ralph Crockett 551. 15 – Wooden side bead molding planes, F-Vg. Makers: L. Case; Bensen & Crannell; Greenfield Tool Co.; T.J. M’Master; etc. 552. 3 – Various wooden planes: homemade 11 ¼” horned tiger maple jack plane, Vg; Ames, Williamsburg, Mass. 7 ¾” fruitwood block, F; 9” homemade skewed rabbet w/ hooked horn, G 553. 7 – Assorted wooden T&G planes, F-G+. Makers: Josiah King; D.R. Barton; T.J. M’Master; L. Kenney; N. Spaulding, Ithaca 554. 4 – Various wooden planes, F-G+: unsigned hardwood screw arm plow plane w/ boxwood threads, knobs & stops; unsigned ¾” dado; screw adjust sash molding; E.G. & R. Wells, Trenton, fixed sash molding plane 555. 10 – Assorted wooden molding planes, G-G+: T. Smith, skew rabbet; Union Factory, Chapin- Stephens, rabbet; unsigned, 4” smoothing block; 7 – hollow & round plane. Makers: H. Wells; Union Factory; R. Hart; etc.

23 556. 9 – Assorted wooden simple, bead, side bead molding planes, F-G+. Makers: Brown & Barnard; Mathieson; Sargent; Bensen; Wm. A. Thompson; Ohio Tool Co.; etc. 557. Tray lot assorted tools: 2 – assembled pr. cabinet maker’s drift pins w/ wooden handles, Vg: 6 – various bench planes in wooden slide-lid box, F-G 558. 10 – Assorted firmer chisels, F-Vg: socket handle, makers: Anvil trade mark; Sheldon Mfg.; Addison corner; unsigned corner; P.S. & W. Co., corner; Marples tang handle; etc. 559. Tray lot assorted tools: 2 – Stanley #62, brass bound four-fold wooden rules, G+; pr. steel tipped brass trammel points, G+; Hyde Tools wall covering trimmer w/ original box, Vg; early jeweler’s small bench vise, G; Correx, Swiss, dial gauge in oak slide-lid box, vg 560. 2 – Brass tipped, wooden levels: Upson Nut Co. #5-28” 3-ply, Vg; “sweetheart” #3-24” rosewood, G+ 561. 4 – Assorted measuring devices: H.W. 16” stiff-joint outside caliper, G+; 2 – Stanley #30 angle dividers, missing or replaced parts, G; Stearns #85 two-arm butt mortise gauge, G 562. Wooden 36” octagon lumber rule, missing lower brass cap, G. 563. 4 – Handsaws, G-Vg: Keystone, K-6 “Challenger” 5pt.; Disston #D-20; Keystone, K-3 “Pace Maker” w/ track graphics; Disston #D8-8pt. 564. 5 – Wooden measuring devices: rosewood & brass mortise gauge, G; Stanley #73 ¼ - 2ft. four-fold rule w/ brass oxbow joint; Lufkin #862-C-2ft. four-fold rule, G; 2 – wedge arm marking gauges, G. 565. Early, Stanley Miller’s Patent #141 “Hump Back” combination plane w/ embossed cast iron frame, fence, (1- iron included), G 566. Stanley #85 cabinet maker’s scraper plane w/ adjustable knob, weld repair to right rail behind blade. The plane is solid user grade. 567. Disston & Sons, #D16-18”-10pt. “Thin Back” w/ nib back, small chip to ear of handle, G+ 568. Mixed hardwood 10” bow saw w/ drawn shaved & shaped rail, repaired stretcher rail w/ tension string & shaped paddle. The saw has wooden turn knobs, G-G+ 569. Unsigned, 46” wooden flooring jointer w/ 2 – 2 ½” wide wedge set irons & 2 – lg. handles. The plane is 46” long, 8 ¾” wide & 4” thick. Made from mahogany thick plank, but unsure of use, G+

24

Catalogue Reference codes:

E Excellent condition Nearly new condition with original finish and no noted damage. VG Very Good condition Small cracks in wooden parts, no repairs. Has minor loss to original finish or fully refinished & restored. Ideal for collector’s or display purpose. G Good condition Minor cracks in wood parts, repairs may be needed for use, has substantial paint or finish loss. Minor rust damage on iron planes & tools. Ideal for users or those wishing to refurbish for collection. F Fair condition Substantial cracks to wooden or metal parts. Most parts still intact, but may have had substantial damage. Major rust damage. Needs attention or repair prior to use. Good for parts. P Poor condition Major damage or altered pieces. Has deep pitted rusting to iron & metal pieces. Good for parts use only, or major repair work.

Cataloguer’s note: This list is a guide that contains our description of each piece. We used several tool references, guides and years of experience handling these tools to create these descriptions. However, many pieces are hand wrought for a particular purpose and no reference to their use exists.

“Rarity” is a very difficult attribute to determine, but we considered how often these pieces have come across our auction block in the past several years to make that distinction. This may not always be in agreement with all price or collector guides.

The conditional reference was done in a fashion that we felt described the quality or condition of each piece. Please refer to the chart above.

Absentee bids: We strongly recommend that anyone wishing to place an absentee bid examine the item in person first. If you choose to place an absentee bid based on the description in the catalog alone, without examining the item personally, you do so at your own risk. The tools are described in an as found condition. You are the final judge. NO RETURNS WILL BE ACCEPTED.

Anyone wishing to place a bid with our auction firm must have either personally examined the tools during the preview times, or have made prior contact with our office staff at Horst Auction Center, (717) 738-3080.

25