Ypbpr/YUV + Audio to HDMI Converter

Total Page：16

File Type：pdf, Size：1020Kb

YPbPr-HDMI Format Converter Model 1T-YPBPR-HDMI 1T-YPbPr-HDMI converts an analog component YPbP r or YUV signal to an HDMI compliant output allowing the viewing or switching of an analog component video signal on an HDMI display. A Toslink input connector is provided to allow integration of a digital audio signal into the HDMI digital output stream. Component video inputs are via three RCA connectors. This unit is a Format Converter only and no video scaling takes place. The output resolution is the same as the input. All common HDTV resolutions are Key Features of the 1T-YPBPR-HDMI automatically detected. The output is fully compliant with • Excellent HDMI Compliant Video Quality the HDMI 1.2 standard assuring proper decoding by an • Automatic Input Format Detection HDMI display. An AC Power Adapter is provided with • Toslink Audio Support locking DC connectors for security. • Operating Frequency to 165Mhz Specifications Input Mechanical YPbPr/YUV Video 1x via 3x RCA Connectors Size (H-W-D) 30x76x105mm (1.2”x3”x4.1”) Digital Audio 1x via Toslink Optical Connector Weight (Net) 200 g (0.43 lbs) Output Warranty HDMI 1x via HDMI Connector Limited Warranty 2 Years Parts and Labor Input Resolutions Environmental Interlaced (50&60Hz) 480i, 576i, 1080i Operating Temperature 0° to +50° C (+32° to +122° F) Progressive (50&60Hz) 480p, 576p, 720p, 1080p Operating Humidity 10% to 90%, Non-condensing Special (24 to 50Hz) 1080p@24, 1080p@25 Storage Temperature -10° to +60° C (+14° to +140° F) 1080p@30, 1080p@50 Storage Humidity 10% to 90%, Non-condensing Video Specifications Power Requirement Progressive Component YPbPr External Power Supply 5VDC@1A, Center Positive Interlaced Component YUV (Y,R-Y,B-Y) Regulatory Approvals Input Signal Levels Y= 1Vp-p. Pb, Pr, U, V= 0.7Vp-p Converter Unit FCC, CE, RoHS Impedance 75Ω, all inputs Power Supply UL, CUL, CE, PSE, GS, RoHS Bandwdith Up to 165Mhz Accessories Included Compliance 1x Power Adapter US, UK or Euro HDMI Version 1.2 1x Operations Manual Product Item Number 1T-YPBPR-HDMI Panel Drawings www.tvone.com • www.tvone.eu • www.tvonela.com • www.tvoneasia.com .

Copy Link

Recommended publications

Component Video W/Audio Distribution Amplifier AT-COMP18AD
Component Video W/Audio Distribution Amplifier AT-COMP18AD User Manual Toll free: 1-877-536-3976 Local: 1-408-962-0515 www.atlona.com TABLE OF CONTENTS 1. Introduction 2 2. Features 2 3. Package Contents 2 4. Specifications 3 5. Panel Description 3 5.1. Front Panel 3 5.2. Rear Panel 3 6. Connection and Installation 4 7. Safety Information 5 8. Warranty 6 9. Atlona Product Registration 7 Toll free: 1-877-536-3976 Local: 1-408-962-0515 1 www.atlona.com INTRODUCTION The 1x8 Component w/Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video with Audio to multiple displays at the same time. It supports all component sources and displays. Supported resolutions: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. The AT-COMP18AD is capable to send signal from one source to all 8 displays at the same time without signal degradation. The 1x8 Splitter will support long cable runs up to100ft ( 30M ). FEATURES • Supports both SD (composite, YCbCr) and HDTV (YPbPr) input signal. • Audio can be analog stereo (L/R) or digital coxial (S/PDIF) • Accepts one component input and splits it to 8 identical and buffered outputs without any loss. • When input is composite video, it can connect up to 3 different video sources and output 8 identical and buffered signal for each input source. • High bandwidth performance 650MHz at -3dB. • Ideal for presentation and home theater applications. PACKAGE CONTENT • 1:8 Component w/audio Splitter • 1 x 6 foot Component cable • 1 x 6 foot Audio cable •
[Show full text]
COLOR SPACE MODELS for VIDEO and CHROMA SUBSAMPLING
COLOR SPACE MODELS for VIDEO and CHROMA SUBSAMPLING Color space A color model is an abstract mathematical model describing the way colors can be represented as tuples of numbers, typically as three or four values or color components (e.g. RGB and CMYK are color models). However, a color model with no associated mapping function to an absolute color space is a more or less arbitrary color system with little connection to the requirements of any given application. Adding a certain mapping function between the color model and a certain reference color space results in a definite "footprint" within the reference color space. This "footprint" is known as a gamut, and, in combination with the color model, defines a new color space. For example, Adobe RGB and sRGB are two different absolute color spaces, both based on the RGB model. In the most generic sense of the definition above, color spaces can be defined without the use of a color model. These spaces, such as Pantone, are in effect a given set of names or numbers which are defined by the existence of a corresponding set of physical color swatches. This article focuses on the mathematical model concept. Understanding the concept Most people have heard that a wide range of colors can be created by the primary colors red, blue, and yellow, if working with paints. Those colors then define a color space. We can specify the amount of red color as the X axis, the amount of blue as the Y axis, and the amount of yellow as the Z axis, giving us a three-dimensional space, wherein every possible color has a unique position.
[Show full text]
Creating 4K/UHD Content Poster
Creating 4K/UHD Content Colorimetry Image Format / SMPTE Standards Figure A2. Using a Table B1: SMPTE Standards The television color specification is based on standards defined by the CIE (Commission 100% color bar signal Square Division separates the image into quad links for distribution. to show conversion Internationale de L’Éclairage) in 1931. The CIE specified an idealized set of primary XYZ SMPTE Standards of RGB levels from UHDTV 1: 3840x2160 (4x1920x1080) tristimulus values. This set is a group of all-positive values converted from R’G’B’ where 700 mv (100%) to ST 125 SDTV Component Video Signal Coding for 4:4:4 and 4:2:2 for 13.5 MHz and 18 MHz Systems 0mv (0%) for each ST 240 Television – 1125-Line High-Definition Production Systems – Signal Parameters Y is proportional to the luminance of the additive mix. This specification is used as the color component with a color bar split ST 259 Television – SDTV Digital Signal/Data – Serial Digital Interface basis for color within 4K/UHDTV1 that supports both ITU-R BT.709 and BT2020. 2020 field BT.2020 and ST 272 Television – Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data Space BT.709 test signal. ST 274 Television – 1920 x 1080 Image Sample Structure, Digital Representation and Digital Timing Reference Sequences for The WFM8300 was Table A1: Illuminant (Ill.) Value Multiple Picture Rates 709 configured for Source X / Y BT.709 colorimetry ST 296 1280 x 720 Progressive Image 4:2:2 and 4:4:4 Sample Structure – Analog & Digital Representation & Analog Interface as shown in the video ST 299-0/1/2 24-Bit Digital Audio Format for SMPTE Bit-Serial Interfaces at 1.5 Gb/s and 3 Gb/s – Document Suite Illuminant A: Tungsten Filament Lamp, 2854°K x = 0.4476 y = 0.4075 session display.
[Show full text]
HDTV Ypbpr Audio Video Matrix Switch, Component Video Routing
HDTV AUDIO/VIDEO MATRIX SWITCH Switch audio and component video from eight sources to four displays ® X U EEM V VEEMUX® SM-8X4-HDA (Front & Back) Features & Applications The VEEMUX® SM-8X4-HDA HDTV Audio/Video Matrix Switch independently switches eight sets of YPbPr component video and analog/digital audio signals to any or all of the four outputs. Each input and output has YPbPr component video, L/R analog audio (balanced/unbalanced), and digital audio on coax (S/PDIF). Supports High Definition and Standard Definition YPbPr Features break-away audio—allows audio to be switched component video. independent of video. Audio can be unbalanced analog stereo, balanced analog Equipped with volume control: -80dB to 10dB, in 1dB steps. stereo or digital S/PDIF. Control the switch through Ethernet, RS232, or front panel • Supports S/PDIF, DTS Digital Surround™, and Dolby buttons. Digital™ 5.1 digital signals. The SM-8X4-HDA is the ideal solution for many applications, Supports 480i (interlaced), 480p (progressive), 720i, 720p, such as mission critical command centers, sports facilities and 1080i, and 1080p formats. entertainment venues. Configuration and Cable Illustration www.networktechinc.com/avmtx-hdtv.html NETWORK 800.RGB.TECH (800.742.8324) 330.562.7070 TECHNOLOGIES 1 INCORPORATED Toll Free: US & Canada International calls HDTV AUDIO/VIDEO MATRIX SWITCH Switch audio and component video from eight sources to four displays V Specifications EEM Video Digital Audio BNC connectors. BNC connectors. U Signal type: HDTV YPbPr component. Signal type: S/PDIF, DTS Digital Surround™, Dolby X Maximum input/output levels: 2Vp-p. Digital™ 5.1. ® Input/output impedance: 75 Ohms.
[Show full text]
Analog-To-SDI Converter Analog Audio Inputs AUDIO in (L/R) RCA Connectors Onto SDI Embedded Channel Pair 1/2
Audio Embedding BlueBox™ Analog>SDI provides selectable enable/disable embedding of a stereo pair on Analog-To-SDI Converter analog audio inputs AUDIO IN (L/R) RCA connectors onto SDI embedded channel pair 1/2. Refer to diagram on rear page or unit label for switch positions. HD/SD-Analog Video-to-SDI Video with Audio Unbalanced Audio Levels and This Device Embedder The unbalanced “RCA” audio inputs on this device will correspond to 0 dBFS when driven with a 2.2 Vrms input. Consumer audio is specified in dBV with a nominal (or recording) level of -10 dBV. The 2 Vrms maximum input level corresponds to +6 dBV. The unbalanced analog inputs on this device allow for 16 dB of headroom above the nominal -10 dBV consumer level (“headroom” is the range between the maximum and nominal audio levels). If these inputs are driven by half of a balanced audio source (connections using the + and GND connections The BlueBox™ Analog-To-SDI Converter (hereinafter “BlueBox™ Analog>SDI”) provides a to the RCA jack), a 6 dB loss should be expected. To compensate for this, the upstream gain should be small “throwdown” package that offers HD/SD analog video-to-SDI conversion. Component incresed by 6 dB where headroom is available. and composite inputs are supported, with support for NTSC/PAL CVBS, and PAL-M CVBS Status Indicator inputs. The processing provides 12-bit video ADC, and additionally 3D comb filtering for SD BlueBox™ Analog>SDI has a Status LED on the side of the unit which functions as follows: inputs.
[Show full text]
KONA Series Capture, Display, Convert
KONA Series Capture, Display, Convert Installation and Operation Manual Version 16.1 Published July 14, 2021 Notices Trademarks AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc. for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for use with recorder, router, software and camera products. Because it matters.™ is a trademark of AJA Video Systems, Inc. for use with camera products. Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered trademarks of AJA Video Systems, Inc. AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc. All other trademarks are the property of their respective owners. Copyright Copyright © 2021 AJA Video Systems, Inc. All rights reserved. All information in this manual is subject to change without notice. No part of the document may be reproduced or transmitted in any form, or by any means, electronic or mechanical, including photocopying or recording, without the express written permission of AJA Video Systems, Inc. Contacting AJA Support When calling for support, have all information at hand prior to calling. To contact AJA for sales or support, use any of the following methods: Telephone +1.530.271.3190 FAX +1.530.271.3140 Web https://www.aja.com Support Email [email protected] Sales Email [email protected] KONA Capture, Display, Convert v16.1 2 www.aja.com Contents Notices . .2 Trademarks . 2 Copyright . 2 Contacting AJA Support . 2 Chapter 1 – Introduction . .5 Overview. .5 KONA Models Covered in this Manual .
[Show full text]
Color Images, Color Spaces and Color Image Processing
color images, color spaces and color image processing Ole-Johan Skrede 08.03.2017 INF2310 - Digital Image Processing Department of Informatics The Faculty of Mathematics and Natural Sciences University of Oslo After original slides by Fritz Albregtsen today’s lecture ∙ Color, color vision and color detection ∙ Color spaces and color models ∙ Transitions between color spaces ∙ Color image display ∙ Look up tables for colors ∙ Color image printing ∙ Pseudocolors and fake colors ∙ Color image processing ∙ Sections in Gonzales & Woods: ∙ 6.1 Color Funcdamentals ∙ 6.2 Color Models ∙ 6.3 Pseudocolor Image Processing ∙ 6.4 Basics of Full-Color Image Processing ∙ 6.5.5 Histogram Processing ∙ 6.6 Smoothing and Sharpening ∙ 6.7 Image Segmentation Based on Color 1 motivation ∙ We can differentiate between thousands of colors ∙ Colors make it easy to distinguish objects ∙ Visually ∙ And digitally ∙ We need to: ∙ Know what color space to use for different tasks ∙ Transit between color spaces ∙ Store color images rationally and compactly ∙ Know techniques for color image printing 2 the color of the light from the sun spectral exitance The light from the sun can be modeled with the spectral exitance of a black surface (the radiant exitance of a surface per unit wavelength) 2πhc2 1 M(λ) = { } : λ5 hc − exp λkT 1 where ∙ h ≈ 6:626 070 04 × 10−34 m2 kg s−1 is the Planck constant. ∙ c = 299 792 458 m s−1 is the speed of light. ∙ λ [m] is the radiation wavelength. ∙ k ≈ 1:380 648 52 × 10−23 m2 kg s−2 K−1 is the Boltzmann constant. T ∙ [K] is the surface temperature of the radiating Figure 1: Spectral exitance of a black body surface for different body.
[Show full text]
Arxiv:1902.00267V1 [Cs.CV] 1 Feb 2019 Fcmue Iin Oto H Aaesue O Mg Classificat Image Th for in Used Applications Datasets Fundamental the Most of the Most Vision
ColorNet: Investigating the importance of color spaces for image classification⋆ Shreyank N Gowda1 and Chun Yuan2 1 Computer Science Department, Tsinghua University, Beijing 10084, China [email protected] 2 Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China [email protected] Abstract. Image classification is a fundamental application in computer vision. Recently, deeper networks and highly connected networks have shown state of the art performance for image classification tasks. Most datasets these days consist of a finite number of color images. These color images are taken as input in the form of RGB images and clas- sification is done without modifying them. We explore the importance of color spaces and show that color spaces (essentially transformations of original RGB images) can significantly affect classification accuracy. Further, we show that certain classes of images are better represented in particular color spaces and for a dataset with a highly varying number of classes such as CIFAR and Imagenet, using a model that considers multi- ple color spaces within the same model gives excellent levels of accuracy. Also, we show that such a model, where the input is preprocessed into multiple color spaces simultaneously, needs far fewer parameters to ob- tain high accuracy for classification. For example, our model with 1.75M parameters significantly outperforms DenseNet 100-12 that has 12M pa- rameters and gives results comparable to Densenet-BC-190-40 that has 25.6M parameters for classification of four competitive image classifica- tion datasets namely: CIFAR-10, CIFAR-100, SVHN and Imagenet. Our model essentially takes an RGB image as input, simultaneously converts the image into 7 different color spaces and uses these as inputs to individ- ual densenets.
[Show full text]
TW8813B Data Short
DATA SHORT To request the full datasheet, please visit www.intersil.com/products/TW8813b TW8813B FN7761 TFT Flat Panel Controller with built-in LVDS, 3D Video Decoder, Triple ADCs and Rev.0.00 Dual PIP Support December 06, 2010 Analog Video Decoder NTSC/PAL/SECAM NTSC (M, 4.34) and PAL (B, D, G, H, I, M, N, N combination), FROM PC VGA OUT TUNER VGA OUT PAL (60), SECAM with automatic format detection • Three 10-bit ADCs and analog clamping circuit. TECHWELL TW8813 AUDIO AMP MICRO-CONTROLLER • Fully programmable static gain or automatic gain control for the Y or CVBS channel • Programmable white peak control for the Y or CVBS channel • Software selectable analog inputs allows any of the following combinations: ANALOG AND DIGITAL -"Up to 4 composite video LCD PANEL -"Up to 2 S-Video Applications -"Up to 1 YPbPr • LCD TVs for home and mobile use • . High quality motion adaptive 3D comb filter for both NTSC and PAL with concurrent 3D noise reduction • Computer LCD Panel Monitors with Television • PAL delay line for color phase error correction • Portable DVD and DVRs players • Image enhancement with 2D dynamic peaking and CTI. • Progressive Scan TV, DTV and HDTV monitors • Digital sub-carrier PLL for accurate color decoding • Portable media player • Digital horizontal PLL and Advanced synchronization Features processing for VCR playback and weak signal performance. The TW8813 incorporates many of the features required to • Programmable hue, brightness, saturation, contrast, create multi-purpose in-car LCD display system in a single sharpness. package. It integrates a high quality 3D comb • High quality horizontal and vertical filtered down scaling NTSC/PAL/SECAM video decoder, triple high speed RGB ADCs, with arbitrary scale down ratio dual scalers for PIP and dual-PIP support, LVDS, bit-mapped • Detection of level of copy protection according to OSD, TCON, triple DACs and images enhancement functions Macrovision standard which include Black and White Stretch, favorite color enhancement and edge enhancement.
[Show full text]
Down Converters
Down Converters Models C2-2100A, 2105A, 2150A, 2155A C2 - 2 100 A Down Converter is based on TV One’s exclusive CORIO®2 technology and provides high quality conversion from DVI and analog PC or HD sources to standard video formats. The input can be any analog computer resolution up to 2048x2048 and 1080p or any DVI resolution up to 1920x1200 and 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats. Our exclusive AutoSet feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. An analog computer Key Features of the C2 - 2100A Series input signal bypass (loop-thru) is also provided. The Inputs: DVI-D, RGB/YPbPr, plus CV/YC for Keying output is simultaneously available in Composite, S-Video Outputs: CV, YC, YUV, YPbPr, plus SD/HD-SDI on (YC), YUV and YPbPr. NTSC, PAL, PAL-M, PAL-N, models C2-2105A and C2-2155A SECAM output standards are supported. The C2-2105A Analog: PC to 2048x2048, HDTV to 1080p/60 provides an SD/HD-SDI output as well as all the other DVI: PC to 1920x1200, HDTV to 1080p/60 features of the C2-2100A. Supports: NTSC, PAL, PAL-M, PAL-N, SECAM Motion Compensation & 3:2 Pulldown All settings are stored in non-volatile memory and are retained even when power is switched off. Ten user Temporal Interpolation & Diagonal Interpolation defined presets are also available to customize settings Automatic Incoming Resolution Detection for various applications. All the functions can be AutoSet - Automatic picture sizing of PC inputs controlled via the front panel Push Buttons, Infrared, 4:4:4 Full bandwidth Chroma Sampling Video signal parameter adjustments RS -232 or IP.
[Show full text]
Connector Setup Guide
Disconnect all power sources before making any connections Refer to User Manual for complete installtion instructions Débranchez toutes les sources d'énergie avant d'établir tous les rapports Référez-vous au manuel d'utilisateur pour des instructions complètes d'installtion Desconecte todas las fuentes de energía antes de hacer cualesquiera conexiones Refiera al manual de usuario para las instrucciones completas del installtion CONNECTOR SETUP GUIDE CONNECTORS EXCELLENT HDMI Cable BEST VGA BETTER YPbPr BETTER S-VIDEO GOOD (COMOPOSITE CVBS GOOD (RF) COAXIAL CONNECTIONS CABLE BOX/ SATELLITE BOX HDMI Cable 0235 S Video VCR PLAYER YPbPr Audio Cable Coaxial Cable GAME CONSOLE CVBS COMPUTER VGA DEFINITION OF CONNECTORS HDMI - (High-Definition Multimedia Interface) is an interface standard used for audiovisual equipment such S Video - Separate vidoe, abbreviated for Separate video and also known as Y/C is an analog video signal as high-definition television and home theater systems. With 19 wires wrapped in a single cable that that carries the video data as two separate signals, luma (~brightness) and chroma (colour), unlike resembles a USB wire, HDMI is able to carry a bandwidth of 5 Gbps (gigabits per second). This is more than composite video, which carries (lower-quality) picture information as a single signal, or component video, twice the bandwidth needed to transmit multi-channel audio and video, future-proofing HDMI for some time which carries (higher-quality) picture information as three separate signals, typically luma and two chroma to come. This and several other factors make HDMI much more desirable than its predecessors, component components. S-Video, as most commonly implemented, carries 480i or 576i resolution video, i.e.
[Show full text]
Color Space to Detect Skin Image: the Procedure and Implication
Scientific Journal of Informatics Vol. 4, No. 2, November 2017 p-ISSN 2407-7658 http://journal.unnes.ac.id/nju/index.php/sji e-ISSN 2460-0040 Color Space to Detect Skin Image: The Procedure and Implication 1 2 3 Sukmawati Nur Endah , Retno Kusumaningrum , Helmie Arif Wibawa 1,2,3Computer Science Department, Universitas Diponegoro, Indonesia E-mail: [email protected],[email protected],[email protected] Abstract Skin detection is one of the processes to detect the presence of pornographic elements in an image. The most suitable feature for skin detection is the color feature. To be able to represent the skin color properly, it is needed to be processed in the appropriate color space. This study examines some color spaces to determine the most appropriate color space in detecting skin color. The color spaces in this case are RGB, HSV, HSL, YIQ, YUV, YCbCr, YPbPr, YDbDr, CIE XYZ, CIE L*a*b*, CIE L*u* v*, and CIE L*ch. Based on the test results using 400 image data consisting of 200 skin images and 200 non-skin images, it is obtained that the most appropriate color space to detect the color is CIE L*u*v*. Keywords: Skin Detection, Color Feature, Color Space Coversion 1. INTRODUCTION Skin is a part of human body. In an image, skin is able to present the existence of human. Furthermore, it can also be determined how many the skin is exposed in an image. The more skin is exposed, the more naked the human object in the image.
[Show full text]