You can connect the either to an 5. Log in to the modem router. Connect the Modem 2. Power on the modem router. ADSL service or to a cable or fiber modem. Choose Quick Start Launch a web browser. Router to a Cable or Fiber Connect the power adapter to the one connection method only. Do not use both. modem router and plug it into an NETGEAR genie displays. Modem electrical outlet. Connect the Modem Router to If you do not see genie, in the 1. Connect the modem router to Wait for the Power LED to an ADSL Service address field of the web browser, the . light green. 1. Contact your Internet service enter www.routerlogin.net. Use an cable to connect the 3. Connect a . N600 WiFi DSL Modem Router provider (ISP). When prompted, enter admin for cable or fiber modem to the yellow Model D3600 Two types of DSL are available: ADSL and the user name and password for LAN4 WAN Ethernet port next to the Use an Ethernet cable to VDSL. Contact your ISP to confirm that your the password. gray DSL port on the modem router. connect your computer to any AC750 WiFi DSL Modem Router DSL service is ADSL. This product supports (Do not use another Ethernet port yellow Ethernet port on the modem router. Model D6000 only ADSL. for this connection.) 2. Connect the modem router to the You can also use WiFi to connect. Internet. ADSL Internet To connect with WiFi, use the WiFi Package Content network name and password on Install an ADSL microfilter between the the product label. phone line and the phone. 4. Log in to the modem router. Use a phone cable to connect the microfilter to the gray DSL port on the modem router. Launch a web browser. NETGEAR ADSL microfilter genie displays. (varies by region) For additional information about connecting Line e L

S If you do not see genie, in the

Cable or fiber ho n ADSL D

to a DSL service, see the other side of this P Internet A microfilter installation guide. address field of the web browser, enter 3. Power on the modem router. Phone cable to DSL port www.routerlogin.net. When Connect the power adapter to the modem prompted, enter admin for the router and plug it into an electrical outlet. user name and password for the Modem router Ethernet cable password. (Model D6000 shown) Wait for the Power LED to light green. to LAN4 WAN port next to 4. Connect a computer. DSL port 5. In genie, change the default connection method. Use an Ethernet cable to connect your computer to any yellow Ethernet port on the a. Select BASIC > xDSL from modem router. Modem router the NETGEAR genie menu. Cable or fiber modem b. From the You can also use WiFi to connect. To connect Physical WAN Type menu, select Ethernet WAN. Phone cable Ethernet cable Power adapter with WiFi, use the WiFi network name and Power adapter (varies by region) password on the product label. c. Click the Apply button. 2. Within two minutes, on your computer or WiFi device, press its WPS button Information for DSL Service Join the Modem Router’s WiFi Network or click its onscreen WPS button. You can connect directly to a DSL line or to a fiber or cable modem. To connect your computer or WiFi device (such as a smartphone or gaming The WPS LED on the modem router lights solid green when the device) to your modem router’s WiFi network, you can use either the computer or WiFi device connects to your router. If you are connecting to a DSL line, make sure that your DSL service manual method or Wi-Fi Protected Setup (WPS) method. is active before you install the modem router. You need the following 3. Repeat this process to add other or WiFi devices. information to install your DSL modem and connect to the Internet: Manual Method • DSL user name and password. This information is included in the 1. Open the software utility that manages your WiFi connections on Reset Modem Router to Factory Settings welcome letter your DSL ISP sent you when you signed up for your the computer or WiFi device that you want to connect to your You can return the modem router to its factory settings. Use the end of a modem router. service. Record your DSL Internet service account user name and paper clip or a similar object to press and hold the Reset WPS button on the password. This utility scans for all wireless networks in your area. modem router until the Power LED blinks green. The modem router resets • Your telephone number or DSL account number. If you do not have 2. Find and select your modem router’s WiFi network name (SSID). and returns to the factory settings. voice service, you can use your DSL account number in place of a phone The SSID is on the product label. number. 3. Enter the modem router’s password (or your custom password if you Support If you do not know or cannot locate your DSL user name and password, call changed it) and click the Connect button. Thank you for purchasing this NETGEAR product. your DSL Internet service provider (ISP). Be specific when speaking with The password is on the product label. After installing your device, locate the serial number on the label of your your DSL Internet service provider. For example, you could say, “I need my 4. Repeat Step 1 through Step 3 to add other computers or WiFi devices. product and use it to register your product at https://my.netgear.com. DSL service user name and password. Can you help me?” You must register your product before you can use NETGEAR telephone Note: If your provider says that they do not support NETGEAR services, WPS Method support. NETGEAR recommends registering your product through the NETGEAR tell them that you need only your DSL user name and password; you do not website. If your computer or WiFi device supports WPS, you can use WPS to join need support. For product updates and web support, visit http://support.netgear.com. the modem router’s WiFi network. For help with the WPS button on your NETGEAR recommends that you use only the official NETGEAR support computer or WiFi device, check the instructions or online help that came resources. WiFi Network Name and Password with that computer or WiFi device. Some older equipment cannot use WPS. This product has a unique WiFi network name (SSID) and network key You can get the user manual online at (password). The default SSID and password are uniquely generated for Note: WPS does not support WEP security. If you are using WEP security, http://downloadcenter.netgear.com or through a link in the product’s user every device, like a serial number, to protect and maximize your wireless use the manual method. interface. security. This information is on the product label. 1. Press and quickly release the Reset WPS button on the modem router For the current EU Declaration of Conformity, visit NETGEAR recommends that you use the preset WiFi settings because you with the end of a paper clip or a similar object. http://support.netgear.com/app/answers/detail/a_id/11621/. can check the product label if you forget them. NETGEAR genie lets you The WPS LED blinks green. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. change these settings. If you do so, write down the new WiFi settings and WARNING: If you do not quickly release the Reset WPS button, the store them in a safe place. modem router returns to its factory settings. See the regulatory compliance document before connecting the power supply. NETGEAR, Inc. © NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR December 2014 350 East Plumeria Drive trademarks are used for reference purposes only. San Jose, CA 95134, USA