DOCSLIB.ORG

Fiberglass Package Pump Stations Fiberglass Package Pump Stations

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fiberglass Package Pump Stations Fiberglass Package Pump Stations Technology Innovation Solutions Fiberglass Package Pump Stations Fiberglass Package Pump Stations The EXCEL Fiberglass Package Lift Stations for Fiberglass is a resilient light-weight material with sewage and stormwater combine a heavy duty excellent chemical resistance and is extremely fiberglass basin with a high quality range of grinder strong. The basin is engineered to be free standing and non-clog pumps to provide a prefabricated yet, fully capable of withstanding ground pressure. lift station solution for many applications. Holes can easily be cut for vent and conduit penetrations on site and inlet connections are field installed. The standard lid is a cast iron manhole cover and frame that can be cast in concrete to create a H20 traffic-rated cover. The standard control panel includes a NEMA 4X enclosure that automatically operates simplex or duplex pumps and includes a high level alarm. EXCEL’s unique integrated valve chamber removes the valves out of the wet is an often utilized option for these package lift stations. The fiberglass basins can also be used as neutralization and buffer pits in industrial waste treatment systems, holding tanks in tank farms, stormwater detention chambers, solids settling pits and dump tanks in water and wastewater treatment systems. EXCEL’s standard range of submersible grinder and non-clog pumps provide dependable solutions for a wide range of domestic, commercial and industrial pumping applications. Applications ~ commercial and domestic sewage ~ septic effluent ~ industrial waste ~ stormwater Fiberglass Pump Station Advantages Factory Pre-Assembled For Fast Installation Heavy-Duty Cast Iron Lids Suitable For Traffic When Cast in Concrete. EPA Compliant H2S Resistant Durable Fiberglass Construction Plug or ate Valves For Pump Isolation and Check Valves For Reverse Flow Prevention Optional Bypass Connection, Air-Release Valve or Flow-Meter in Valve Vault Integrated Valve Vault eliminates the Need to Enter Wet Well For Service. Multiple Piping Materials Available SCH80 PVC, Ductile Iron or HDPE uide Rail System Allows Easy Pump Removal. Submersible Non-clog, Chopper, Vortex or rinder Pumps Available to Handle a Wide Range of Applications Fiberglass or Steel Anti-Flotation Flange Available Sludge Baffle Prevents Solids Buildup. Fiberglass Package Pump Station Installation References Fort Belvoir, VA Duplex Fiberglass Pump Station ~ 6.0’ Dia. x 39.0’ Deep Wet Well with 6.0’ Dia. x 6.0’ Deep Integral Valve Vault ~ Duplex 7.5 HP Non-Clog Pumps ~ H20 Traffic Rated Cast Iron Covers with Safety Grates ~ 4” Discharge Flowmeter and 4” By-Pass Connection ~ Stainless Steel Panel Stand Hillard Assisted Living: Hillard, OH Duplex Fiberglass Pump Station ~ 5.0’ Dia. x 16.0’ Deep Wet Well with 5.0’ Dia. x 5.0’ Deep Integral Valve Vault ~ Duplex 3 HP Chopper Pumps ~ Aluminum Pedestrian Rated Cover ~ Stainless Steel Lifting Hoist ~ Stainless Steel Panel Stand ~ Emergency Power Generator Receptacle Liverpool WWTP: Medina County, OH Duplex Fiberglass “Centrate” Pump Station ~ 4.0’ Dia. x 10.0’ Deep Wet Well with 4.0’ Dia. x 4.0’ Deep Integral Valve Vault ~ Duplex 1/2 HP Vortex Pumps ~ Aluminum Access Ladder Installed in Wet Well and Valve Vault ~ Stainless Steel Panel Stand Simplex Fiberglass “Waste Receiving” Pump Station ~ 6.0’ Dia. x 14.0’ Deep Wet Well with 5.0’ Dia. x 5.0’ Deep Integral Valve Vault ~ Simplex 3 HP Vortex Pump ~ Aluminum Access Ladder Installed in Wet Well and Valve Vault ~ Stainless Steel Panel Stand Fiberglass Package Pump Station Installation References Fort Belvoir, VA Lucas County: Toledo, OH Duplex Fiberglass Pump Station Duplex Fiberglass “High Oaks” Pump Station ~ 6.0’ Dia. x 39.0’ Deep Wet Well with 6.0’ Dia. x 6.0’ ~ 4.0’ Dia. x 13.0’ Deep Wet Well with 4.0’ Dia. x 5.0’ Deep Integral Valve Vault Deep Integral Valve Vault ~ Duplex 7.5 HP Non-Clog Pumps ~ Duplex 2 HP Grinder Pumps ~ H20 Traffic Rated Cast Iron Covers with Safety Grates ~ Aluminum Pedestrian Rated Cover with Safety Grates ~ 4” Discharge Flowmeter and 4” By-Pass Connection ~ Stainless Steel Control Panel & Panel Stand with Landscape Wrap ~ Stainless Steel Panel Stand ~ Cast Iron Air Release Valve in Valve Vault Duplex Fiberglass “Inland Court” Pump Station ~ 3.5’ Dia. x 14.0’ Deep Wet Well with 3.5’ Dia. x 5.0’ Deep Integral Valve Vault ~ Duplex 2 HP Grinder Pumps ~ Aluminum Pedestrian Rated Cover with Safety Grates ~ Stainless Steel Control Panel and Panel Stand with Landscape Wrap ~ Cast Iron Air Release Valve in Valve Vault Michigan Dept. of Transportation: Hillsdale County, MI Duplex Fiberglass Pump Station ~ 6.0’ Dia. x 13.0’ Deep Wet Well with 6.0’ Dia. x 6.0’ Deep Integral Valve Vault ~ Duplex 10 HP Non-Clog Pumps ~ Aluminum Pedestrian Rated Cover ~ Stainless Steel Control Panel and Panel Stand ~ 4” By-Pass Connection Pilot Truck Stop: PA Duplex Fiberglass Pump Station ~ 5.0’ Dia. x 10.0’ Deep Wet Well with 5.0’ Dia. x 4.5’ Deep Integral Valve Vault ~ Duplex 1/2 HP Vortex Pumps ~ Aluminum Pedestrian Rated Cover ~ Stainless Steel Crane Socket ~ Stainless Steel Panel Stand ~ 3” By-Pass Connection Common Wastewater Industry Challenges ~ Increasing Asset Ownership Cost from Maintenance of Ageing Infrastructure ~ Inflated Installation Costs of Traditional Concrete Pump Stations ~ Traditional Concrete Stations are Compromised by Hydrogen Sulfide (H2S) Corrosion, unless protected by an interior coating that is costly to install and maintain. ~ Groundwater Infiltration (I&I) Into Sanitary Sewer System Contact Us For A Fiberglass Pump Station Recommendation Design Criteria for Fiberglass Pump Stations ~ What is the average daily flow rate in gallons per minute (GPM) into the pump station? ~ What is the proposed forcemain size, length to discharge point and construction? ~ What is the grade elevation at the proposed pump station location? ~ What is the grade elevation at the proposed discharge point of the forcemain? ~ What is the gravity sewer invert pipe elevation? ~ Confirm the jobsite electrical service details. 800 892 2009 EXCEL HEAD OFFICE 15950 Commerce Park Drive www.excelfluidgroup.com Cleveland, OH 44142 [email protected] P. 216-941-1500 | F. 216-941-9916 V3 Copyright 2018: Excel Fluid Group LLC reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document..
Load more

Recommended publications
  • Xylem Rental Guide Xylem Rental Solutions for Your Pumping Or Treatment Challenges
    Xylem Rental Guide Xylem Rental Solutions for Your Pumping or Treatment Challenges 0845 707 8012 24/7 Rapid Response Welcome to our Rental Guide Xylem is a force to be reckoned with when providing total solutions for fluid handling and control. With a history spanning 100 years, it is a company passionate about innovation and determined to solve the most challenging water issues. Xylem’s powerful combination of products, services and applications expertise serves market sectors including Public Utilities, Infrastructure, Municipal, Building Services and Industry. Our Rental division, specialises in the rental of Flygt electric submersible pumps, Godwin prime assisted diesel pumps, Wedeco and Sanitaire treatment systems. Xylem remain unique in the market place supporting rental applications with the products that Xylem also manufacture as Original Equipment Manufacturers of each of the famous brands included in the range. Our skilled team of engineers offer unprecedented technical backup and design of bespoke pumping and treatment systems, whether temporary or semi-permanent, for anything from a small amount of nuisance water to the movement of sewage and major flow diversion schemes. By choosing Xylem Water Solutions for your rental requirements, you gain automatic access to a wealth of experience and technical knowledge. Our engineers can assess your needs, design your pumping or treatment system and install it. Offering a 24/7 rapid response service, with fully owned transportation including lifting cranes and strategically located regional
    [Show full text]
  • 4 SEWAGE PUMPING STATIONS Design Specifications
    Design Specifications & Requirements Manual 4 SEWAGE PUMPING STATIONS 4.1 DEFINITION AND PURPOSE ...................................................................................... 1 4.2 PERMITTED USES ..................................................................................................... 1 4.3 DESIGN CRITERIA ..................................................................................................... 1 4.3.1 General ........................................................................................................ 1 4.3.2 Site Layout and Servicing ............................................................................ 2 4.3.3 Structural ..................................................................................................... 3 4.3.4 Flow Capacity .............................................................................................. 3 4.3.5 Pumps ......................................................................................................... 4 4.3.6 Channels ..................................................................................................... 5 4.3.7 Pump Controls ............................................................................................. 5 4.3.8 Valves and Fittings ...................................................................................... 5 4.3.9 Flow Measurement ...................................................................................... 6 4.3.10 Wet Wells ...................................................................................................
    [Show full text]
  • Capacity Report 2020
    2020 CAPACITY REPORTS FLOWS & LOADINGS I&I/FLOW MONITORING CAPACITY ASSESSMENT 2020 CAPACITY REPORTS FLOWS & LOADINGS I&I/FLOW MONITORING CAPACITY ASSESSMENT PREFACE The Flows and Loadings Report is one of three related documents that are part of the annual process to monitor and evaluate capacity in the entire LOTT system. The intent, under LOTT’s Wastewater Resource Management Plan (also known as the Highly Managed Plan), is to assure that needed new capacity is brought on-line “just in time” to meet system needs. Capacity needs evaluated include wastewater treatment, Budd Inlet discharge, reclaimed water use/recharge, and conveyance capacity in the entire LOTT system. These three reports are prepared annually and are used to help identify capital projects for inclusion in the annual Capital Improvements Plan. Flows and Loadings Report – analyzes residential and employment population projections within the Urban Growth Area and estimates the impact on wastewater flows and loadings within the LOTT wastewater system. Inflow and Infiltration Report – uses dry and wet weather sewer flow monitoring results to quantify the amount of unwanted surface (inflow) and subsurface (infiltration) water entering the sewer system and to prioritize sewer line rehabilitation projects. Capacity Assessment Report – uses flows and loadings data and inflow and infiltration evaluation results to analyze system components (i.e. conveyance, treatment, and discharge), determine when limitations will occur, and provide a timeline for new system components and upgrades. As each report is published, it will be posted in the Library on LOTT’s website – www.lottcleanwater.org. 2019 Flows and Loadings Report i Table of Contents Executive Summary ......................................................................................................
    [Show full text]
  • ABBA Pump Parts & Service Booth # 107 Manufacturers of High Quality
    ABBA Pump Parts & Service Booth # 107 Manufacturers of high quality replacement parts for pumps used in water and wastewater treatment facilities. Specializing in cast parts, impellers, casings, etc. Contact: Wendy Jamison, 5370 Munro Court, Burlington, ON L7L 5N8 CANADA, 800‐268‐5142, 905‐333‐ 0973, [email protected], www.abbaparts.com ABS USA Booth # 216 ABS is one of the world's leading manufacturers of pumps, mixer and aerators. We have a long tradition in the wastewater industry with more than 100 years of application and manufacturing experience. At ABS, we make it our business to understand wastewater. Contact: Tom Epke, 140 Pondview Drive, Meriden, CT 06450, 203‐238‐2700, 203‐238‐0738, [email protected], www.absgroup.com/www.abseffex.com ADS Booth # 415, 416 ADS provides flow monitoring equipment and service as well as a full range of CCTV and SSES study services. Accusonic is a leading provider of engineering flow monitoring solutions and Hydra‐Stop manufactures equipment and provides services for pipeline tapping, line stopping and valve insertion. Contact: Mike Bonomo, 51 Wentworth Avenue Building B, Unit 11, Londonderry, NH 03053, 203‐257‐ 3224, 203‐261‐2715, [email protected], www.adsenv.com Advanced Drainage Systems, Inc. (ADS) Booth # 194 ADS has established a reputation for leadership in the storm drainage, sanitary sewer and storm water treatment/management industries by staying committed to the development of state‐of‐the‐art products and services that set industry standards and help solve industry challenges. The ADS product line encompasses solutions for storm water drainage, sanitary sewer, road/highway construction, residential/commercial development for turf/recreational applications, retention/detention systems, on‐site leaching chambers and septic systems.
    [Show full text]
  • Pennsylvania 42 (State) (Number)
    PENNSYLVANIA 42 (STATE) (NUMBER) PENNSYLVANIA INFRASTRUCTURE INVESTMENT AUTHORITY AND DEPARTMENT OF ENVIRONMENTAL PROTECTION FEDERAL FY2015 CLEAN WATER PROJECT PRIORITY LIST APRIL 22, 2015 EXPLANATION OF HEADINGS NEEDS CATEGORY: I - SECONDARY TREATMENT II - TREATMENT MORE STRINGENT THAN SECONDARY IIIA - INFILTRATION/INFLOW CORRECTION IIIB - MAJOR SEWER SYSTEM REHABILITATION IVA - NEW COLLECTOR SEWERS AND APPURTENANCES IVB - NEW INTERCEPTORS AND APPURTENANCES V - CORRECTION OF COMBINED SEWER OVERFLOWS PROJECT TYPE: STP - SEWAGE TREATMENT PLANT STPMOD - SEWAGE TREATMENT PLANT MODIFICATION INT - INTERCEPTOR PS - PUMP STATION FM - FORCE MAIN SS - SEWER SYSTEM SSREH - SEWER SYSTEM REHABILITATION NPDES #: NATIONAL POLLUTION DISCHARGE ELIMINATION SYSTEM PERMIT NUMBER PROJECT NUMBER: DEP PROJECT IDENTIFICATION NUMBER LOAN #: PENNVEST LOAN NUMBER OF FUNDED PROJECT ELIG. COST: ESTIMATED ELIGIBLE NEEDS FOR PROJECT Note 1: Green projects pertain to those considered for funding after the issuance of EPA’s “Procedures for Implementing Certain Provisions of the Fiscal Year 2010 Appropriation Affecting the Clean Water and Safe Drinking Water State Revolving Fund Programs” dated 4/21/2010. Note 2: The DEP Rating System changed beginning with the July 22, 2014 Pennvest Board Meeting. Projects that were rated under the old system and received funding prior to this date will show a DEP Rating of N/A and are listed alphabetically. The DEP Rating at the time of funding for these projects can be found in the Federal FY2014 PPL dated April 22, 2014. All other projects have been rerated with the new system and will show a numerical value so they can be directly compared for priority funding. PENNSYLVANIA INFRASTRUCTURE INVESTMENT AUTHORITY AND DEPARTMENT OF ENVIRONMENTAL PROTECTION FEDERAL FY2015 CLEAN WATER PROJECT PRIORITY LIST APRIL 22, 2015 APPLICANT INFORMATION NEEDS CATEGORIES PROJECT INFORMATION Beaver Twp SA - Wentlings Corners COUNTY: Clarion I: $0 IVA: $1,795,100 PROJECT NO.: CS423066-01 Sanitary Sewer Extension 324 Tippecanoe Road REGION: NW II: $704,900 IVB: $0 PROJ.
    [Show full text]
  • Desalination Task Force Memorandum
    DESALINATION TASK FORCE MEMORANDUM TO: DESALINATION TASK FORCE FROM: PROGRAM MANAGERS SUBJECT: ENERGY STUDY STATUS REPORT, PROJECT ASSESSMENT REVIEW, AND DISCUSSION ON PROJECT EVALUATION, SCORING AND RANKING METHODOLOGY DATE: OCTOBER 19, 2011 RECOMMENDATION: That the scwd2 Desalination Task Force receive the sixth Energy Study status report and schedule, provide feedback on the attached 16 draft Project Assessments (dPAs), receive an update on the October 13, 2011 Energy Study Technical Working Group (ETWG) Workshop, and provide feedback on the scoring, ranking and selection methodologies being described below and in the attached document(s). BACKGROUND: This memorandum serves as the sixth status report and will update the Task Force on work progress with regard to the Energy Minimization and Greenhouse Gas Reduction Study (Energy Study). With guidance from members of the ETWG and additional local energy experts, the Energy Study work to date has focused on establishing the potential energy use of the facility, further understanding the CEQA and regulatory framework used to evaluate that energy use, and vetting potential projects that could be implemented to reduce energy and indirect GHG impacts of the project. Sixteen projects (which can be generally categorized as water and energy efficiency projects, renewable energy projects, and/or GHG reduction projects) were recommended for in-depth evaluation by the ETWG. (For simplicity, the 16 projects will be collectively referred to as GHG reduction projects for the remainder of the document.) The dPAs provide a framework for understanding the project efficiency, and relative economic and social costs. These factors may ultimately be used to assemble cost effective and community-valued GHG reduction project portfolios, the foundation of the Energy Minimization and GHG Reduction Plan.
    [Show full text]
  • Biosolids Master Plan
    Executive Summary Introduction This Biosolids and Residuals Master Plan presents a balanced life‐cycle cost‐based, environmentally sound and publically acceptable approach to meet CMUD’s short‐ and long‐term residuals processing needs. In order to provide recommendations for a long term residuals management plan, CDM Smith developed projections of future flows and residuals characteristics and volumes and evaluated the financial, environmental and social sustainability of numerous residuals management strategies, including that which is employed currently. For each management strategy, CDM Smith identified currently available technology options for residuals treatment and handling processes and determined probable costs for the evaluated processing upgrades. Anticipated regulatory changes and emerging social‐political issues were identified and their impact considered. CDM Smith analyzed the potential risks and benefits associated with each strategy by addressing financial, regulatory, environmental, and public relations considerations. The existing residuals management program has various limitations including: . Single disposal outlet – Class B land application (except for non‐conforming residuals that are landfilled) is the sole disposal option, which has a long term relatively high risk since there is concern of diminishing land availability due to urbanization and, in addition, public concerns about Class B biosolids land application. Dependence on one independent contractor‐ There is some risk involved in relying on an external party for managing 100% of the residuals in the event contractor becomes unable to meet contractual terms with CMUD in the future. Relatively poor dewatering performance at WWTPs – all WWTPs have challenges regarding dewatering, from low solids cake concentration to fecal coliform regrowth issues. Lack of resource recovery – For example, the existing WWTPs are not capable of generating power from digester biogas.
    [Show full text]
  • Wastewater Training Guide
    Wastewater Training Guide Our technology. Your success. Pumps n Valves n Service conquertheclog.com Our technology. Your success. Pumps n Valves n Service The New Wastewater Solve The Problem. Don’t Just Transfer It. More than ever before, flushable wipes and other debris are clogging pumps and systems in wastewater treatment applications. KSB has the solutions that will conquer the clog and keep the water flowing. Today’s wastewater requires new thinking KSB understands the dynamic challenges facing the industry, and KSB knows how to pump this new wastewater. Purpose of this guide This training guide is designed to arm you with clearly targeted, relevant information to help educate and inform you and your customers about KSB’s approach to wastewater. It demonstrates why KSB’s non-clogging, clean-flowing technology is far superior to the competition’s abrasive, energy-sucking, impeller-damaging method that simply transfers the problem downstream. KSB: Unique product portfolio designed for today’s challenges KSB’s German-engineered pumps have been specifically designed to solve the industry’s ever-changing challenges. Today’s next-generation KSB impellers have been proven to meet the challenging wastewater needs of the North American market. There are two cultural-behavioral drivers changing wastewater and challenging pump processes. 1. Reduced water use per capita 2. Increased flushables. The result: increased clogs, ragging and debris Wastewater Trends 21st Century Wastewater (Less Fluid, More Solids, More Disposables) U.S. Water Usage 1980 2005 2010 Total Water Use 440 bgd 410 bgd 350 bgd ( billion gallons per day - bgd) Per Capita Water Use 1,800 gallons 1,300 gallons 1,100 gallons ( gallons per capita per day) per day per day per day Source: 2015 report from the U.S.
    [Show full text]
  • Water Quality Management Permit Auth
    3850-PM-BCW0015d 3/2016 COMMONWEALTH OF PENNSYLVANIA PERMIT NO. 0371404 Permit DEPARTMENT OF ENVIRONMENTAL PROTECTION BUREAU OF CLEAN WATER AMENDMENT NO. 1 APS ID. 1029391 WATER QUALITY MANAGEMENT PERMIT AUTH. ID. 1337768 A. PERMITTEE (Name and Address): CLIENT ID#: 8099 B. PROJECT/FACILITY (Name): Freeport Borough Freeport Borough STP 414 Market Street Freeport, PA 16229-1122 C. LOCATION (Municipality, County): SITE ID#: 261800 Freeport Borough, Armstrong County D. This amendment approves the construction, modification, and operation of sewage facilities consisting of: New influent pump station, new headworks building with screening and grit removal facilities, new sequenced batch reactor (SBR), new UV disinfection process, conversion of existing process units to flow equalization (EQ) and aerobic digestion, and improvements to the existing sludge drying beds. The existing pump station in the Administration Building will be removed from service. The existing clarigesters will be converted to aerobic digesters. The existing trickling filters will be converted to flow EQ basins. The existing secondary clarifiers and chlorine contact tanks will be abandoned in place. The aeration basins will be removed from the treatment train and demolished. The chlorine contact tanks will be the foundation for the UV process and effluent water storage. Main Pump Station Three 30 HP submersible raw sewage chopper pumps (2 duty, 1 back-up) 1 pump 1,050 gpm @ 49.6 ft TDH 2 pumps 2,100 gpm @ 67 ft TDH Wet Weather Storm Pumps Three 25 HP submersible wet weather chopper pumps (3 duty, 1 shelf back-up) 1 pump 1,200 gpm @ 29.5 ft TDH 2 pumps 2,400 gpm @ 33.8 ft TDH 3 pumps 3,600 gpm @ 39.5 ft TDH EQ Basin (converted trickling filter) 170,000-gallon storage for flow excess of 3.0 MGD Headworks Building Mechanically cleaned bar screen (primary channel) Manual bar screen (secondary channel) Solids will be directed to a compactor to be wash organic material and be dewatered into a bagger.
    [Show full text]
  • Sewer Pump Station Master Plan
    Table of Contents North Tahoe Public Utility District Main Sewer Pump Station Master Plan Executive Summary Introduction ...........................................................................................................................................................1 Technical Memorandum 1......................................................................................................................................2 Technical Memorandum 2......................................................................................................................................2 Technical Memorandum 3......................................................................................................................................2 Capital Improvements Program .............................................................................................................................7 Summary................................................................................................................................................................9 Tables E.1 Pump Replacement Recommendation Summary...............................................................4 E.2 Master Plan Project Summary...............................................................................................8 Technical Memorandum 1 Data Collection, Flow Monitoring, Facility Condition Assessment, Regulatory Review, and Sewage Collection and Export System Overview, Risk Assessment and Management Introduction ...........................................................................................................................................................1
    [Show full text]
  • 2017 Final Program
    ConfErEnCE program EnvironmEntal StEwardShip in thE 21St CEntury new England water Environment association presents: nEwEa 2017 annual Conference & Exhibit January 22 – 25 | Boston Marriott Copley Place | Boston, MA Miscellaneous Events and Committee Meetings Sunday, January 22, 2017 Committee Chair & Council Director Orientation Salon A/B 10:00 – 11:30 AM Executive Committee Salon E Noon – 3:00 PM YP Summit Provincetown Noon – 3:00 PM monday, January 23, 2017 Awards Committee Orleans 8:30 – 10:00 AM Plant Operations Committee Falmouth 9:00 – 10:30 AM CSO/Wet Weather Committee Champions Noon – 1:00 PM Safety Committee (Mtg Moved to Tuesday) Champions Noon – 1:00 PM Stormwater Committee Regis Noon – 1:00 PM Watershed Management Committee MIT Noon – 1:00 PM Water Reuse Committee Salty Pig Restaurant Noon – 2:00 PM YP Committee Meeting Legal Sea Foods Noon – 2:00 PM Industrial Wastewater Committee Champions Noon – 1:30 PM Asset Management BU Noon – 1:30 PM Operations Challenge Committee Orleans 1:00 – 2:00 PM Lab Certification Hyannis 1:00 – 2:00 PM Membership Committee Falmouth 3:00 – 4:00 PM Public Awareness Committee Champions 3:00 – 4:00 PM State Association Leadership Regis 2:00 – 3:30 PM Government Affairs Committee Regis 3:30 – 5:00 PM Sustainability Committee Orleans 4:30 – 6:00 PM Public Education Committee Champions 4:30 – 5:30 PM tuesday, January 24, 2017 Journal Committee Orleans 7:30 – 8:30 AM Sponsor Committee Champions 9:00 – 10:00 AM Laboratory Practices Committee Berkeley 10:30 AM - Noon Residuals Management Champions Noon – 1:00 PM Collections Systems Committee St.
    [Show full text]
  • 2.0 Regulatory Requirements
    April 2012 COMPREHENSIVE SANITARY SEWER MASTER PLAN 2.0 REGULATORY REQUIREMENTS Regulatory requirements, existing constraints, and water quality impacts directly affect the basis of design for new improvements. These issues are discussed in this section. 2.1 COLLECTION SYSTEM REGULATIONS 2.1.1 Pump Station Design Regulatory Requirements Pump stations are generally used to lift wastewater from a lower elevation and convey it to a high location where it is discharged. Pump stations must meet requirements of DEQ. Typical guidelines governing pump station design include: . Redundant pumping capacity – DEQ design criteria requires that the pump stations be capable of conveying the 5-year 24-hour storm peak hourly flow with the largest pump out of service. Provisions for Hydrogen Sulfide removal, if required. Hydrogen Sulfide can be corrosive (especially to concrete materials) and often lead to odor problems. Where septic conditions are believed to occur, provisions for addressing hydrogen sulfide should be in place. Alarms – alarm system should include high level overflow, power, and pump fail conditions. DEQ design criteria require that an alarm condition results when all pumps are called on (loss of redundancy alarm) to keep up with the inflow into the pump station. This is an indicator that the pump station capacity is exceeded. Standby power. Since extended power outages may lead to wastewater backing up into homes and onto the streets, provisions for standby power are required for every pump station. Mobile generators or portable trash pumps may be acceptable for lift stations, depending on the risk of overflow, available storage in the wet well and pipelines, alarms and response time.
    [Show full text]