DOCSLIB.ORG

Building on a Heritage of Innovation and Performance

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Building on a Heritage of Innovation and Performance BUILDING ON A HERITAGE OF INNOVATION AND PERFORMANCE. Over 70 years of the world’s best marine engineering and innovation; a heritage of leading edge technology, performance, fuel economy and advanced reliability; standards that surpass all industry and consumer expectations. Since the beginning in 1939, Mercury Marine has built durable, powerful and innovative small horsepower portable outboard engines. Incorporating innovations throughout the years, including through prop exhaust, first seen on the 1957 Mark-10, Capacitor Discharge Ignition, dual water pickups and Electronic Fuel Injection (EFI), currently available on the 25 and 30hp FourStroke, and that’s only a snapshot. Nobody has a more thorough understanding of Portable outboards and the features they require than Mercury Marine. With 25 models in 66 configurations, ranging from 30hp to 2.5hp Mercury have the right portable option for you. Explore the range of Mercury portables and see why more boaters are starting up a Mercury. Mercury outboards are simply the best, most refined engines money can buy for any marine application. 33 Mercury Innovation Mercury Extreme Reliability Boating is not often thought of as a harsh environment. Just stop and think about it. Marine engines can and are often used for extended periods at wide-open throttle in harsh saltwater and full UV sunlight. Then sit in storage over the off season, in some cases without any use. At Mercury, we test our engines mercilessly and use those results to make them even more reliable. The tougher the test, the tougher the engine. We put our engines through tests such as vicious log strikes, saltwater spray booths, high humidity chambers and hot and cold water temperatures. That’s just phase one of our brutal testing process. Then we run each engine rigorously for thousands of hours to prove it can stand the test of time. So whatever you put the engine through we have already done it. We not only test our engines meticulously, we support them with an industry leading warranty too. 3-year Corrosion Warranty A lot of manufacturers talk about their corrosion resistant outboards but Mercury Marine is the only manufacturer who backs it up with an exclusive 3-year limited corrosion warranty. And that’s only the beginning. Unbeatable Warranty All Mercury Portable outboards from 30hp – 2.5hp receive a fully transferable, non declining warranty that goes deeper than the rest. A comprehensive warranty that’s supported by the strength and service expertise of one of the biggest dealer networks in the country. Simply have your engine serviced at an Authorised Service Centre at the recommended routine servicing/maintenance requirements set by Mercury Marine, and you’re covered by an additional 2-year factory backed warranty on top of the first 3 years. That’s a full 5 years of warranty coverage. 4 Mercury Advantages Multi-Function Tiller Handle Offering one-handed operation and total control over shifting, stopping, steering, throttle and tilt, the multi-function tiller handle brings confidence and convenience to tiller steer boating so you can keep your eyes on the water. The ultimate in durability Our advanced powerheads feature the very latest in corrosion protection and multi-step painting processes. Bigfoot A taller, heavy duty gear case allows the use of a larger propeller resulting in outstanding thrust, power and boat control on larger, heavier boats. Pro Kicker The perfect auxiliary outboard, equipped with power tilt, electric start and a lower gear ratio for precise trolling. 3-star Australian Emission Standards rating Mercury Marine offers more 3-star rated outboards than any other manufacturer. Based on the Australian Voluntary Emissions Labelling Scheme (VELS). www.oeda.com.au 55 FourStroke 6 FourStroke Portables – Quiet, clean and fuel efficient. Mercury FourStroke Portables provide perfect fuel efficient power to everything from small inflatables to aluminium dinghies and punts. Designed with leading edge features for enhanced reliability and performance, Mercury FourStrokes are a breeze to start, simple to operate and so quiet you will hardly notice them running. Largest Range in the business – There is a Mercury portable for any application Industry leading Battery-less Electronic Fuel Injection (EFI) – Ensures instant turn key starting, great all round performance and even greater fuel economy (Battery Free EFI on 30hp & 25hp only) Dependable engines – backed up with thousands of hours of rigorous testing in Mercury’s state-of-the art testing facility Super smooth, quiet running – designed for years of boating pleasure OEDA 3 star – Ultra low emissions rating Backed by the only 3 year corrosion warranty in the industry Supported by the largest service network in Australia and New Zealand mercurymarine.com.au 77 FourStroke 30hp EFI / 25hp EFI With the industry’s first battery-less Electronic Fuel Injection (EFI) system, these FourStroke portables set the standard for ease of starting, smooth running and efficient performance and it doesn’t stop there. > Multi-function Tiller Handle offering one handed operation and total control over shifting, throttle, steering, engine stop, throttle friction and tilting – better maneuverability and ease of use. > High output Alternator – 15 Amps provides superior battery charging capability. > Dual Water inlets – to ensure proper cooling for all key powerhead and gearcase components. > Water cooled fuel cooler – minimises vapour lock and hot fuel issues. > Backup rope start on electric start models for peace of mind. 25hp 30hp Engine Type: 3-Cyl 526cc Weight: 78kg (30hp), 71kg (25hp) Steering: Remote or Tiller (shift in handle) Starting: Manual or Electric Gear Shift: F-N-R Trim Positions: Power tilt & trim (30hp & 25hp Remote), gas assist (30hp Tiller), manual (25hp Tiller) Shaft Length: 15” (M), 20” (L) 8 20hp / 15hp / 15hp PK When it comes to reliability and durability, Mercury FourStroke portables have got you covered, packed with the following features, these portables are built to make your boating more enjoyable long into the future. > Multi-function Tiller Handle offering one handed operation and total control over shifting, throttle, steering, engine stop, throttle friction and tilting – better maneuverability and ease of use. > High output Alternator – 12 Amps provides battery charging on demand and allows for use of electronics and lights. > Exclusive fuel primer and fast idle system – provides fast easy starting and simple fast idle control. > Automatic reverse lock – hooks engage automatically when in reverse preventing the engine popping out of the water. > Exclusive engine mount – ‘Wishbone’ style engine mount cradles the powerhead absorbing and isolating vibration for smoother overall operation. > Backup rope start on electric start models for peace of mind. > Dual Water inlets – to ensure proper cooling for all key powerhead and gearcase components 15hp 15hp PK 20hp Engine Type: 2-Cyl 351cc Weight: 52kg (20hp), 62kg (15hp PK), 52kg (15hp) Steering: Remote or Tiller (shift in handle) Starting: Manual or Electric (15hp PK Electric only) Gear Shift: F-N-R Trim Positions: 6 (Power Trim on 15hp PK) Shaft Length: 15”(M), 20”(L) - 20hp & 15hp 20”(L), 25”(XL) - 15hp PK 9 FourStroke 9.9hp PK / 9.9hp BF / 9.9hp / 8hp Clean, compact, lightweight and fuel efficient, these user-friendly portables will take you anywhere you need to go. Feature packed, these little FourStrokes make your boating even easier. > Multi-function Tiller Handle offering one handed operation and total control over shifting, throttle, steering, engine stop, throttle friction and tilting – better maneuverability and ease of use. > Exclusive fuel primer and fast idle system – provides fast easy starting and simple fast idle control. > Automatic reverse lock – hooks engage automatically when in reverse preventing the engine popping out of the water. > Backup rope start on electric start models for peace of mind. > Ergonomic carry handle for convenient transporting. 9.9hp PK 9.9hp BF 8hp Engine Type: 2-Cyl 209cc 9.9hp Weight: 49kg (9.9hp PK), 44kg (9.9hp BF), 38kg (9.9hp & 8hp) Steering: Remote or Tiller (shift in handle) - 9.9hp models, Tiller (shift in handle) - 8hp Starting: Electric (9.9hp PK), Manual or Electric (9.9hp BF & 9.9hp), Manual (8hp) Gear Shift: F-N-R Trim Positions: 5 with auto ratchet (9.9hp PK - Power Tilt) Shaft Length: 15”(M), 20”(L) - 8hp 15”(M), 20”(L), 25”(XL) - 9.9hp 20”(L), 25”(XL) - 9.9hp PK & 9.9hp BF 10 6hp / 5hp / 4hp 3.5hp / 2.5hp When it comes to true portability you can’t go past a Mercury These light outboards punch above their weight when it FourStroke 6, 5 or 4hp, weighing in at only 26kg. These extremely comes to torque, power and reliability. Perfect power for well featured, compact engines are ideal for inflatables, tenders or inflatables and tenders, featuring: small fishing boats and feature a through prop exhaust for clean, > Lightweight design and ergonomic carry handle quiet operation. for convenient transporting. > Lightweight design and ergonomic carry handle for > 1 litre Integral fuel tank with external shutoff valve convenient transporting. for convenience and safe portability. > Integral fuel tank with external shutoff valve and remote > Forward and Neutral shifting with 360° tiller steering for tank connection for convenience and safe portability. better maneuverability and full throttle reverse. > Automatic reverse lock – hooks engage automatically when > 4 trim positions – maximum performance and convenience. in reverse preventing the
Load more

Recommended publications
  • Tecumseh T E C H N I C I a N ' S H a N D B O O K
    TECUMSEH T E C H N I C I A N ' S H A N D B O O K This manual covers the following basic type or model numbers dependent on age of product: AH520, AH600, AV520, AV600, HSK600, TVS600. This manual covered many engines under an Old form of Identification which will need to be reviewed as well. TYPE / SPECIFICATION NUMBER 638-670 1398-1642 and Craftsman 200 Series Models. 2-CYCLE ENGINES Contents Page Page GENERAL INFORMATION ...................................... 1 PRIMER BULB (DIAPHRAGM ENGINE IDENTIFICATION................................... 1 CARBURETOR) ................................................ 11 INTERPRETATION OF MODEL NUMBER .......... 1 CARBURETOR CHECK VALVE ......................... 11 ENGINE CARE ......................................................... 2 CARBURETOR SERVICE PROCEDURE ......... 12 SHORT BLOCKS .................................................. 2 EMISSIONIZED DIAPHRAGM CARBURETION13 STORAGE: ............................................................ 2 OUTBOARD CARBURETORS .............................. 13 TUNE-UP PROCEDURE ...................................... 3 OUTBOARD CONTROL PANEL ........................ 14 EXHAUST PORT CLEANING .............................. 3 CARBURETOR ADJUSTMENTS .......................... 15 2-CYCLE THEORY OF OPERATION ...................... 4 IDLE SPEED ADJUSTMENT ............................. 15 OPERATION OF PISTON PORT STYLE ............ 4 FLOAT TYPE-FIXED MAIN, IDLE ADJUST ...... 15 OPERATION OF REED PORTED STYLE DIAPHRAGM - SINGLE AND DUAL WITH LOOP SCAVENGING.............................
    [Show full text]
  • Owner's Manual
    OWNER’s MAN UAL MODELS K91 I (4hP) Kl6l,&Kl81 (7hP) (8 hP) operating & maintenance instructions CONGRATULATIONS-You have selected a fine four-cycle engine. Kohler designs long-life strength and on-the-job durability into each engine...making a Kohler engine dependable...dependability you can count on. n Parts subject to the most wear and tear (like cylinders, crankshafts, and camshafts) are made from precision-formulated castiron...and because the cast iron cylinders can be rebored, these engines can last even longer. n Kohler engines are easy to service, all routine service parts--points, condenser, spark plug, air filter, carburetor--are easily and quickly accessible. 0 Every Kohler engine is backed by a worldwide network of over 10,000 distributors and dealers. Service support is just a phone call away. Call l-800-544-2444 (U.S. & Canada) for Sales & Service Assistance. To keep your engine in top operating condition, follow the simple maintenance procedures given in this manual. Safety Information For Your Safety! These precautions should be followed at all times. Failure to.follow these precautions could result in injury to yourself and others. A WARNING A WARNING A WARNING # db r-u -v Explosive Fuel can cause fires and Rotating Parts can cause severe Hot Parts can cause severe burns. severe burns. injury. Do not touch engine while operating Stop engine before filling fuel tank. Stay away while engine is in or just after stopping. operation. Explosive Fuel! Rotating Parts! Hot Parts! Gasoline is extremely flammable Keep hands, feet, hair, and clothing Engine components can get and its vapors can explode if away from all moving parts to extremely hot from operation.
    [Show full text]
  • GO-480, IGO-480, GSO-480 and IGSO-480 Series Operator’S Manual Lycoming Part Number: 60297-14
    Operators Manual Lycoming GO-480, IGO-480, GSO-480 and IGSO-480 Series Approved by FAA 3rd Edition Part No. 60297-14 July 2008 652 Oliver Street Williamsport, PA. 17701 U.S.A. 570/323-6181 GO-480, IGO-480, GSO-480 and IGSO-480 Series Operators Manual Lycoming Part Number: 60297-14 ©2008 by Lycoming. All rights reserved. Lycoming and Powered by Lycoming are trademarks or registered trademarks of Lycoming. Lycoming Engines, a division of AVCO Corporation, a wholly owned subsidiary of Textron Inc. All brand and product names referenced in this publication are trademarks or registered trademarks of their respective companies. For additional information: Mailing address: Lycoming Engines 652 Oliver Street Williamsport, PA 17701 U.S.A. Phone: Factory: 570-323-6181 Sales Department: 570-327-7268 Fax: 570-327-7101 Lycomings regular business hours are Monday through Friday from 8:00 AM through 5:00 PM Eastern Time (-5 GMT) Visit us on the World Wide Web at: http://www.lycoming.com LYCOMING OPERATORS MANUAL ATTENTION OWNERS, OPERATORS, AND MAINTENANCE PERSONNEL This operators manual contains a description of the engine, its specifications, and detailed information on how to operate and maintain it. Such maintenance procedures that may be required in conjunction with periodic inspections are also included. This manual is intended for use by owners, pilots and maintenance personnel responsible for care of Lycoming powered aircraft. Modifications and repair procedures are contained in Lycoming overhaul manuals; maintenance personnel should refer to these for such procedures. SAFETY WARNING Neglecting to follow the operating instructions and to carry out periodic maintenance procedures can result in poor engine performance and power loss.
    [Show full text]
  • M 60C 70C 70Cx 90A2 115A2 120A2 140A2
    OWNER’S MANUAL M 60C 70C 70CX 90A2 115A2 120A2 140A2 OB No.003-11039-A ! READ THIS MANUAL BEFORE USING THE OUTBOARD MOTOR. FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. KEEP THIS MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE. Copyright © 2013 Tohatsu Corporation. All rights reserved. No part of this manual may be reproduced or transmitted in any from or by any means without the express written permission of Tohatsu Corporation. YOUR TOHATSU OUTBOARD MOTOR OWNER REGISTRATION AND IDENTIFICATION Upon purchasing this product, be sure that the WARRANTY CARD is correctly and completely filled out and mailed to the addressee noted there on. This WARRANTY CARD identifies you as the legal owner of the product and serves as your warranty registration. TO THE EXTENT PERMITTED BY APPLICABLE LAW, YOUR OUTBOARD MOTOR WILL NOT BE COVERED BY THE APPLICABLE LIMITED WARRANTY, IF THIS PROCEDURE IS NOT FOLLOWED. PRE-DELIVERY CHECK Be sure that the product has been checked by an authorized TOHATSU dealer before you take delivery. Limited Warranty Please refer to the TOHATSU outboard motor Limited warranty provided to you with this product, the terms and conditions of which, as amended from time to time, are incorporated by reference into the manual. Serial Number In the space below, please record the outboard motor's serial number (indicated both on the bottom cowl and on the cylinder block). The serial number will be needed in the event of theft or to quickly identifying the outboard motor type. Serial Number : To You, Our Customer Thank you for selecting a TOHATSU outboard motor.
    [Show full text]
  • 21” Steel Deck Walk Mowers Commercial Model Series 17
    Safety Instructions & Operator’s Manual for 21” STEEL DECK WALK MOWERS COMMERCIAL MODEL SERIES 17 PROPELLED MODELS CP216017RV CP215017KWV CP215017HV CP215517HV MODEL NUMBER EXPLANATION C P 21 60 17 R V MODEL DESIGNATION ENGINE OPTIONS SELF-PROPELLED ENGINE TYPE CUTTING WIDTH SERIES DESIGNATION ENGINE HORSE POWER C – Commercial Model P – Self Propelled Model 17 -- Series Designation 21 – 21” Cutting Width R – Robin Engine H - Honda Engine KW - Kawasaki Engine 50 = 5.0 HP (Engine Horse Power) 55 - 5.5 HP (Engine Horse Power) V – Over Head Valve Engine 60 = 6.0 HP (Engine Horse Power) Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance with the operating instructions and common sense. COPYRIGHT © 2002 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 7-4932 (I.R. 6/07/02) IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment.
    [Show full text]
  • Non - AutomoVe Engines Business (4HP - 15HP) TION TRUC ONS C MARINE
    TURE GRICUL A Non - Automove Engines Business (4HP - 15HP) TION TRUC ONS C MARINE GREAVES COTTON LIMITED www.greavescoon.com TRIAL INDUS Ranipet (Chennai) Factory About Greaves Coon Limited Diversified Engineering Company | Providers of Mobility Soluons | Manufacturers of Prime Movers Greaves Coon Limited is proud to be serving the Indian & global market for 160 years. We are present in every facet of our consumer’s lives, whether it involves; ● Providing last - mile transportaon soluons in the rural & urban markets through our engines ● Powering millions of lives with our generator sets ● Easing the lives of our farmers with our agricultural equipment & engines ● Changing the face of the Indian & global infrastructural scenario with our impeccable industrial engines & construcon equipment Our strengths include; ● World - class R&D setup ● Extensive PAN India network of 3500+ sales & service touch - points ● 6 state - of - the - art manufacturing facilies located at Aurangabad, Chennai & Pune About Non - Automove Engines Business Our range of non - automove engines are fuel efficient, compact and versale prime movers for various applicaons across segments like agriculture, construcon, marine and other industrial applicaons. Our engines, ranging from 4HP to 15HP, come with the below key characteriscs; Diesel engines with air & water cooled opons Reliable, durable & rugged engines Light-weight, compact & fuel efficient Customized power take-off arrangement Easy maintenance through extensive service network The 500 Series Single Cylinder | Vercal | Four Stroke | Direct Injecon | Air Cooled | Diesel Engine ● Oil bath air filter efficient to work in dusty condions ● Decompression lever for ease of starng ● Standard power take offs: 23 Dia. conical, 28 Dia. conical, 25.4 dia.
    [Show full text]
  • M Ercury O Utb O Ards
    Mercury Outboards 2 3 welcome to the world of Mercury Being the #1 On The Water™ means leading the If your passion is water sports then way in every aspect. Mercury OptiMax® is your power of choice. From products to service, to customer satisfaction, Mercury is also the leader in four-stroke technology Mercury outperforms the competition at every turn. with the most modern and the broadest range of four-stroke outboards in the industry. Take Verado® for example. Only Mercury offers an exclusive engine concept that delivers the best This brochure is an invitation to discover the world two-stroke performance in a four-stroke package, of Mercury. with convenience-enhancing features that make A world of pleasure, excitement and freedom. every boat ride a unique experience. be pure Like an eagle gliding through the air, Verado jets you through the water like no other engine will ever do. Its unique look exudes pure perfection and its stealth operation puts your boating perfectly in tune with the beautiful colours of the surrounding water. be you Verado is also a winner that lets you fully enjoy your time on the water. Breathtaking top speed and acceleration for when you like going to extremes, or ultra smooth operation to enjoy relaxing moments. 4 5 be Verado Verado is much more than just an outboard motor, it’s a way of life. Being Verado means standing out from the crowd and leading the way. You are a winner who takes risks and is always ahead of others. You like going to extremes and never accept second best.
    [Show full text]
  • Computational Study of Direct Fuel Injection in The
    COMPUTATIONAL STUDY OF DIRECT FUEL INJECTION IN THE ROTAX 914 ENGINE A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Engineering By BRAD PAUL POLLOCK B.S.M.E, University of Toledo, 2005 2010 Wright State University WRIGHT STATE UNIVERSITY SCHOOL OF GRADUATE STUDIES December 14, 2010 I HEREBY RECOMMEND THAT THE THESIS PREPARED UNDER MY SUPERVISION BY Brad Pollock ENTITLED Computational Study of Direct Fuel Injection in the Rotax 914 Engine BE ACCEPTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF Master of Science in Engineering Committee on Final Examination Haibo Dong, Ph.D. Haibo Dong, Ph.D. Thesis Director George P.G. Huang, P.E., Ph.D. John Hoke, Ph.D. Chair, Department of Mechanical and Materials Engineering College of Engineering and Computer Science Hui Wan, Ph.D. Andrew Hsu, Ph.D. Dean, School of Graduate Studies ABSTRACT Pollock, Brad. M.S.Egr., Department of Mechanical and Materials Engineering, Wright State University, 2010. Computational Study of Direct Fuel Injection in the Rotax 914 Engine. Direct injection spark ignition (DISI) is a fuel delivery method in which the fuel is introduced directly into the combustion chamber of an internal combustion engine. Although direct fuel injection was first pioneered in the early 1920’s, it has only recently become a reliable option due to advances made in control systems and injection technology. Direct injection enables increased fuel efficiency and higher power output than a conventional Port Fuel Injection (PFI) system. By delivering pressurized fuel directly into the cylinder, the degree of fuel atomization and the fuel vaporization rate are increased.
    [Show full text]
  • 4-Cycle L-Head Engines
    TECUMSEH T E C H N I C I A N ' S H A N D B O O K This manual covers engine models: ECV100 - 120, H22 - 80, HH40 - 70, HHM80, HM70 - 100, HMSK70 - 110, HMXL70, HS40 - 50, HSK30 - 70, HSSK40 - 50, HT30 - 35, HXL35, LAV30 - 50, LEV80 - 120, TNT100 - 120, TVM125 - 220, TVXL170 - 220, TVS75 - 120, TVXL105 - 115, V40 - 80, VH40 - 70, V60 - 70, VM70 - 100 Model numbers are located on the engine shroud. 3 TO 11 HP 4-CYCLE L-HEAD ENGINES ENGINES & TRANSMISSIONS CONTENTS CHAPTER 1 GENERAL INFORMATION ...................................................................................................... 1 ENGINE IDENTIFICATION ............................................................................................................................ 1 INTERPRETATION OF MODEL NUMBER .................................................................................................... 1 SHORT BLOCKS ........................................................................................................................................... 2 FUEL .............................................................................................................................................................. 2 ENGINE OIL ................................................................................................................................................... 3 TUNE-UP PROCEDURE ............................................................................................................................... 3 STORAGE .....................................................................................................................................................
    [Show full text]
  • Air- and Liquid-Cooled Power Packages
    CREATING POWER SOLUTIONS. Air- and liquid-cooled power packages Hatz industrial diesel engines EN www.hatz-diesel.com Over 110 years of experience in engine production make Hatz a valuable partner. Hatz industrial diesel engines 2 The diesel engine is the core competence In its history lasting over 135 years Hatz has developed into being a specialist for diesel engines rated up to 64 kilowatts. The basis of all corporate activities is the development and production of high-quality and rugged diesel engines. The performance and reliability of our products are valued by our customers around the globe. Hatz operates worldwide as an independent of solutions for power and energy supply, scalable specialist for single- to four-cylinder diesel electricity stations, pump systems as well as special engines. Our diesel engines are used in all applications in the maritime and military sectors. application fields, for instance in construction machinery, compressors, commercial vehicles, The components business division manufactures agricultural machinery, systems, material high-precision metal components designed espe- handling equipment, as well as in ships. Hatz cially for the automotive and commercial vehicles develops and manufactures diesel engines in a industry, agriculture, mechanical engineering, and power spectrum from 1.5 to 64 kilowatts. industry, during which Hatz has acquired the special Hatz gives jobs to more than 1,100 employees, expertise needed for the serial precision machining over 5 percent of them in research and from titanium. development. Production is carried out in the company’s headquarters in Ruhstorf an der The global service network includes over Rott in southern Germany.
    [Show full text]
  • Magnum 8,12,16 Hp Owner's Manual
    OWNER'S MANUAL MAGNUM 8,12,16 HP HORIZONTAL CRANKSHAFT Congratulations You have selected a fine four-cycle, single cylinder, air-cooled engine Kohler designs long life strength and on-the-job durability into each engine making a Kohler engine dependable dependability you can count on Here are some reasons why: Kohler engines are easy to service All routine service areas (like the dipstick and oil fill, air cleaner, spark plug, and carburetor) are easily and quickly accessible Parts subject to the most wear and tear (like the cylinder, crankshaft, and camshaft) are made from precision formulated cast iron Because the cast iron cylinder can be rebored, these engines can last even longer Dependable, maintenance-free electronic ignition system ensures fast, easy starts time after time Every Kohler engine is backed by a worldwide network of over 10,000 distributors and dealers Service support is just a phone call away Call 1-800-544-2444 (US & Canada) for Sales & Service assistance To keep your engine in top operating condition, follow the maintenance procedures in this manual 1 Safety Precautions To insure safe operations please read the following statements and understand their meaning Also refer to your equipment owner's manual for other important safety information This manual contains safety precautions which are explained below Please read carefully WARNING Warning is used to indicate the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored CAUTION Caution is
    [Show full text]
  • Vlv 4-Cycle Engines
    TECUMSEH T E C H N I C I A N ' S H A N D B O O K This manual covers VLV40 - 675. Other illustrated Tecumseh 2-Cycle Engine, 4-Cycle Engine and Transmission manuals; booklets; and wall charts are available through Tecumseh. For complete listing write or call VLV (VECTOR) 4-CYCLE ENGINES Not For Resale www.SmallEngineDiscount.com TABLE OF CONTENTS Chapter 1 General Information .............................................................................. 1 Engine Identification ........................................................................................... 1 Engine Breakdown .............................................................................................. 2 Parts List ............................................................................................................. 3 Engine Care ........................................................................................................ 4 Fuel, Oils, Storage .............................................................................................. 4 Tune-Up Procedure ............................................................................................ 5 4-Cycle Engine Theory ....................................................................................... 6 Chapter 2 Air Cleaners ..................................................................................................... 7-8 Carburetion ......................................................................................................... 9 Identification .......................................................................................................
    [Show full text]