DOCSLIB.ORG

The Building Information Model in Facilities

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Building Information Model in Facilities THE BUILDING INFORMATION MODEL IN FACILITIES MANAGEMENT by Ronald O. Méndez A Thesis Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for the Degree of Master of Science in Civil Engineering May 2006 APPROVED: _____________________________________________ Prof. Guillermo Salazar, Thesis Advisor _____________________________________________ Prof. Fabio Carrera, Committee Member _____________________________________________ Mr. John Miller, Committee Member Abstract The construction industry’s traditional resistance to incorporate change has prevented benefits from technological advancements to accrue. One area in which technology shows potential to benefit the industry is in addressing the existing communication gaps between the designer, builder, and owner. This gap is more evident in the operation and maintenance of a building. At project completion, an owner also receives information of the building. This information is comprised of as-built drawings, operation and maintenance manuals, warranties, and other documents. However, there is additional and valuable information for the owner generated throughout the design and construction process that goes unrecorded or is not passed unto the owner at project completion. The Building Information Model (BIM) is a digital collection of well coordinated information about the design and construction of a building in the form of an integrated database, where information is generated as the digital model is produced. The intent of the research is to explore how the BIM could be used to provide continuity in the flow of information in a coordinated and comprehensive manner from the design and construction of the building to its occupation and operation by the owner. Through literature review, a case study, and interviews with facilities management personnel of four Worcester area universities, it was found that use of the BIM is perceived of modest value because of their current preference for paper submittals, resistance to learning new software, and accessibility by people of all levels in the organization. The Internet is considered to be a tool that could greatly contribute to overcome the resistance of using information generated and coordinated through BIM. Therefore, a ii prototype website was developed using information about the design and construction of the recently completed WPI Bartlett Center. This information was partially generated by BIM and it also contains digitized information about other aspects of the building. The website contains a BIM-generated 3D model and samples of the operation and maintenance manuals, warranties, and submittals. The implementation of a website was found to be promising because of increased access to information, high usability, and variety of content. iii Acknowledgements “Todo lo puedo en Cristo que me fortalece.” Filipenses 4:13 Thank you God for the strength, determination, and hope to complete this work. I would like to express my deep gratitude to Professor Guillermo Salazar. Thank you for all your help, advice, wisdom, and patience throughout my years at WPI. I am in debt to you. I would like to thank everyone who has provided me with input for this thesis. Neil Benner, John Miller, and Professor Fabio Carrera, thanks. I would also like to thank all those who contributed to this. Marshall O’Hearn, Sarwat Basha, John Rathbun, Sean Hoey, Liz Szafarowicz, Angela Martino, Andrew Mills, and Sibora Halilaj, without your collaboration, it would have been a much longer process. I owe special thanks to Greg “G funk” Funk and Matthew “Ziggy” Zagaja for all of the help provided in developing the website in addition to answering assorted questions about software and technology. I would have been in major trouble without you guys. I can’t forget the rest of Stoddard B3 crew. Thanks for helping me out in one way or another. A mi familia, gracias. Mamá and Papá, Lucia and Alejandro Méndez. Thank you for your love, care, help, support, and inspiration. Los quiero. Erik, thanks for being a brother and a friend. To all my friends, thanks for being there. To everyone at Centro Cristiano Betesda, thank you for your support. Lilian, thank you for your love, support, friendship, cheers, and confidence in me. iv Table of Contents Abstract............................................................................................................................... ii Acknowledgements............................................................................................................ iv Table of Figures ................................................................................................................. vi 1.0 Introduction................................................................................................................... 1 2.0 Background................................................................................................................... 5 2.1 Industry Fragmentation............................................................................................. 5 2.1.1 Interoperability................................................................................................... 9 2.2 Computer Aided Design ......................................................................................... 10 2.3 Building Information Model................................................................................... 12 2.3.1 Parametric Modeling........................................................................................ 17 2.4 Autodesk Revit........................................................................................................ 18 2.4.1 Autodesk Revit Study ...................................................................................... 22 2.5 Autodesk Revit Systems ......................................................................................... 23 2.6 Building Operations and Maintenance.................................................................... 25 2.7 WPI Plant Services ................................................................................................. 26 2.7.1 Current Information Management ................................................................... 27 2.7.2 Fire Safety........................................................................................................ 30 3.0 Methodology............................................................................................................... 32 3.1 Literature Review.................................................................................................... 32 3.2 Interviews................................................................................................................ 32 3.3 Case Study .............................................................................................................. 32 3.4 E-Buildings Interactive Qualifying Projects........................................................... 35 3.5 Outreach to the Industry.......................................................................................... 36 4.0 Survey of Facilities Management Personnel .............................................................. 38 4.1 University A............................................................................................................ 38 4.2 University B............................................................................................................ 41 4.3 University C............................................................................................................ 43 4.4 University D............................................................................................................ 44 4.7 State Building Inspector.......................................................................................... 47 4.8 Summary................................................................................................................. 49 5.0 Proposed Case Study Website .................................................................................... 52 6.0 Conclusions & Recommendations for Future Work................................................... 66 6.1 Conclusions............................................................................................................. 66 6.2 Recommendations for Future Work........................................................................ 69 Appendix A- J. Miller Interview....................................................................................... 72 Appendix B- C. Salter Interview ...................................................................................... 73 Appendix C- N. Benner Interview.................................................................................... 75 Appendix D- University A Interview ............................................................................... 77 Appendix E- University B Interview................................................................................ 78 Appendix F- University C Interview ................................................................................ 79 Appendix G- University D Interview ............................................................................... 80 Appendix H- State Building Inspector Interview ............................................................. 82 Appendix I- Website......................................................................................................... 83 v Table
Load more

Recommended publications
  • Linking Revit Facility Life-Cycle Data to ARCHIBUS – a Case Study of an Academic Institution
    Available online at 2019.creative-construction-conference.com/proceedings/ CCC 2019 Proceedings of the Creative Construction Conference (2019) 118 Edited by: Miroslaw J. Skibniewski & Miklos Hajdu https://doi.org/10.3311/CCC2019-118 Creative Construction Conference 2019, CCC 2019, 29 June - 2 July 2019, Budapest, Hungary Linking Revit Facility Life-Cycle Data to ARCHIBUS – A Case Study of an Academic Institution Walid Thabeta,*, Dan Millerb aVirginia Tech, Blacksburg, VA 24061, USA bInfrastructure Management Solutions, Vienna, VA 22182, USA Abstract Building owners and facility managers are beginning to leverage spatial information and asset data in BIMs for efficient and sustainable building operations and maintenance. Extracting information from BIMs for import into FM platforms still poses an implementation challenge to many owners. Methods for bi-directional synchronization of data between a BIM and FM software for real-time access to lifecycle model data can be more advantageous over one-way data export approaches so the owner can take advantage of an as-built BIM that can have data updated in real-time with continuous asset data updates. This paper uses a case study of a renovation project on a university campus to illustrate the use of the ARCHIBUS Smart Client for bidirectional real-time data exchange with Revit. The Archibus workflows were compared to other methods for data exchange as to how they support the needs of the owner. Lessons learned and challenges related to this workflow are discussed. © 2019 The Authors. Published by Budapest University of Technology and Economics & Diamond Congress Ltd. Peer-review under responsibility of the scientific committee of the Creative Construction Conference 2019.
    [Show full text]
  • Cost Estimating and BIM Techniques for Effective Application Session
    Cost Estimating and BIM Techniques for Effective Application Session - S506 Ecobuild Fall 2008 [email protected] 1 Today’s Presenters Presenter Presenter Michael D. Dell’Isola George Aucamp, P.E., CVS, FRICS BSc. CM/PM Senior Vice President Project Manager, Faithful+Gould Inc. Faithful+Gould Inc. 2 Today’s Presentation Introduction Definitions, background and what’s driving the move to BIM Key BIM concepts and benefits BIM and BIM related Software Integrating BIM and cost estimating and project management Project examples Estimating Scheduling Constructability Discussion 3 Background BIM is a complicated and developing subject Connecting BIM to estimating and project management appears to be rather simple – it isn’t Today’s presentation and discussion will focus on procedures, methodology and business processes Technology is important but it is (or should be) a follower not a leader 4 Defining Building Information Modeling (BIM) Per NIBS A Building Information Model (BIM) is a digital representation of physical and functional characteristics of a facility. As such it serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. 5 Why is BIM different from business as usual? BIM represents the shift away from analog/paper processes to digital processes for design, construction and operation. It uses model-based technology linked to an integrated project database. BIM means actually improving the process and not just doing the same things in a new way BIM is not just the electronic transfer of two dimensional documents; it is an intelligent, parametric, object oriented model-based approach.
    [Show full text]
  • Microstation Powerdraft® Drafting Software for Your Most Demanding Projects
    PRODUCT DATA SHEET CONNECT Edition MicroStation PowerDraft® Drafting Software for Your Most Demanding Projects Design and Document Quickly and Accurately With MicroStation PowerDraft, you have the power to design, document, and detail projects of any size or complexity. Whether you are an architect, engineer, constructor, or GIS professional, you can use MicroStation PowerDraft as a companion to any modeling or CAD design application. More than just computer-aided-drafting software, MicroStation PowerDraft enables you to develop and produce precise and rich physical and electronic deliverables easily and reliably. You can develop and document 2D CAD designs with an unmatched range of powerful, intelligent drafting and constraints tools. Unlike other technical drawing software, MicroStation PowerDraft enables you to produce polished drawings, schedules, and reports directly from 3D and BIM models. You can also automatically annotate and build reports based on object properties and take Use and precisely incorporate design data in nearly any format. models further by producing intelligent 3D PDFs. Incorporate Referenced Design Content Integrated Modeling and Documentation Workfl ows View and work with design information from others in real time using live The CONNECT Edition provides a common environment for comprehensive project referencing of 2D/3D DGN, DWG, and large image fi les, refreshed on demand. delivery and connects users, projects, and your enterprise. With the CONNECT You can even natively reference PDF fi les into your designs. Edition, you now have a personal portal to access learning, communities, Integrate Point Clouds and project information. You can also share personal fi les including i-models and Easily incorporate a wide range and scale of point-cloud data into the design PDFs directly from your desktop with other users, or stage them for easy access environment.
    [Show full text]
  • Use of Building Information Modeling Technology in the Integration of the Handover Process and Facilities Management
    USE OF BUILDING INFORMATION MODELING TECHNOLOGY IN THE INTEGRATION OF THE HANDOVER PROCESS AND FACILITIES MANAGEMENT by Sergio O. Alvarez-Romero A Dissertation Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for the Degree of Doctor of Philosophy in Civil Engineering August, 2014 APPROVED: Guillermo Salazar, PhD, Major Advisor Leonard Albano, PhD, Committee Member Alfredo Di Mauro, AIA, Committee Member Laura Handler, LEED AP, Tocci Building Companies, Committee Member Fredrick Hart, PhD, Committee Member William Spratt, MSc FM, Committee Member John Tocci, CEO Tocci Building Companies, Tahar El-Korchi, PhD, Department Head Committee Member Abstract The operation and maintenance of a constructed facility takes place after the construction is finished. It is usually the longest phase in the lifecycle of the facility and the one that substantially contributes to its lifecycle cost. To efficiently manage the operation and maintenance of a facility, the staff in charge needs reliable and timely information to support decision making throughout the facility’s lifecycle. The use of Building Information Modeling (BIM) is gradually but steadily changing the way constructed facilities are designed and built. As a result of its use a significant amount of coordinated information is generated during this process and stored in the digital model. However, once the project is completed the owner does not necessarily receive full benefits from the model for future operation and maintenance of the facility. This research explores the information that in the context of educational facilities has value to the owner/operator and that can be delivered at the end of the construction stage through a BIM-enabled digital handover process.
    [Show full text]
  • An Ontology of the Uses of Building Information Modeling
    The Pennsylvania State University The Graduate School The College of Engineering AN ONTOLOGY OF THE USES OF BUILDING INFORMATION MODELING A Dissertation in Architectural Engineering By Ralph G. Kreider © 2013 Ralph G. Kreider Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy December 2013 The dissertation of Ralph G. Kreider was reviewed and approved* by the following: John I. Messner Professor of Architectural Engineering Dissertation Adviser Co-Chair of Committee Chimay J. Anumba Department Head of Architectural Engineering Professor of Architectural Engineering Co-Chair of Committee Robert M. Leicht Assistant Professor of Architectural Engineering Ute Poerschke Associate Professor of Architecture *Signatures are on file in the Graduate School. ii ABSTRACT Building Information Modeling (BIM) does not change the purpose for performing a task related to delivering a facility – only the means by which the purpose is achieved. Currently, no common language exists for the purposes of implementing BIM. This lack of a common language makes it challenging to precisely communicate with others the purposes for implementing BIM. The goal of this research is to create that common language by developing a BIM Use Ontology. A BIM Use (Use) is defined as a method of applying Building Information Modeling during a facility’s life-cycle to achieve one or more specific objectives. The BIM Use Ontology (the Ontology) provides a shared vocabulary that is applied to model (or express) the BIM Uses, including the type of objects (or terms), and concepts, properties, and relationships that exist. The methods performed to develop the BIM Use Ontology included: 1) defining domain and scope, 2) acquiring domain knowledge, 3) documenting domain terms, 4) integrating domain terms, 5) evaluating (refining and validating) the BIM Use Ontology, and 6) documenting the BIM Use Ontology.
    [Show full text]
  • 9783030335694.Pdf
    Research for Development Bruno Daniotti Marco Gianinetto Stefano Della Torre Editors Digital Transformation of the Design, Construction and Management Processes of the Built Environment Research for Development Series Editors Emilio Bartezzaghi, Milan, Italy Giampio Bracchi, Milan, Italy Adalberto Del Bo, Politecnico di Milano, Milan, Italy Ferran Sagarra Trias, Department of Urbanism and Regional Planning, Universitat Politècnica de Catalunya, Barcelona, Barcelona, Spain Francesco Stellacci, Supramolecular NanoMaterials and Interfaces Laboratory (SuNMiL), Institute of Materials, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Vaud, Switzerland Enrico Zio, Politecnico di Milano, Milan, Italy; Ecole Centrale Paris, Paris, France The series Research for Development serves as a vehicle for the presentation and dissemination of complex research and multidisciplinary projects. The published work is dedicated to fostering a high degree of innovation and to the sophisticated demonstration of new techniques or methods. The aim of the Research for Development series is to promote well-balanced sustainable growth. This might take the form of measurable social and economic outcomes, in addition to environmental benefits, or improved efficiency in the use of resources; it might also involve an original mix of intervention schemes. Research for Development focuses on the following topics and disciplines: Urban regeneration and infrastructure, Info-mobility, transport, and logistics, Environment and the land, Cultural heritage and landscape, Energy, Innovation in processes and technologies, Applications of chemistry, materials, and nanotech- nologies, Material science and biotechnology solutions, Physics results and related applications and aerospace, Ongoing training and continuing education. Fondazione Politecnico di Milano collaborates as a special co-partner in this series by suggesting themes and evaluating proposals for new volumes.
    [Show full text]
  • Navisworks 2013 Supported Formats and Applications
    Autodesk Navisworks 2013 Solutions Autodesk ® Navisworks ® 2013 Supported File Formats London Blackfriars station, courtesy of Network Rail and Jacobs R Autodesk Navisworks 2013 Solutions Autodesk Navisworks 2013 Solutions This document details support provided by the current release of Autodesk Navisworks 2013 solutions (including Autodesk Navisworks Simulate and Autodesk Navisworks Manage) for: • CAD file formats. • Laser scan formats. • CAD applications. • Scheduling software. NOTE: When referring to Navisworks or Autodesk Navisworks 2013 solutions in this document this does NOT include Autodesk Navisworks Freedom 2013, which only reads NWD or DWF files. Product Release Version: 2013 Document version: 1.0 March 2012 © 2013 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autodesk, AutoCAD, Civil 3D, DWF, DWG, DXF, Inventor, Maya, Navisworks, Revit, and 3ds Max are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. Disclaimer Certain information included in this publication is based on technical information provided by third parties. THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. “AS IS.” AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
    [Show full text]
  • Navisworks® 2016 Supported File Formats
    Navisworks® 2016 Supported File Formats Autodesk Navisworks 2016 Solutions This document details support provided by the current release of Autodesk Navisworks 2016 solutions (including Autodesk Navisworks Simulate and Autodesk Navisworks Manage) for: CAD file formats. Laser scan formats. CAD applications. Scheduling software. NOTE: When referring to Navisworks or Autodesk Navisworks 2016 solutions in this document this does NOT include Autodesk Navisworks Freedom 2016, which only reads NWD or DWF files. Product Release Version: 2016 Document version: 2.3 March 2015 © 2014 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autodesk, AutoCAD, Civil 3D, DWF, DWG, DXF, Inventor, Maya, Navisworks, Revit, and 3ds Max are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. Disclaimer Certain information included in this publication is based on technical information provided by third parties. THIS PUBLICATION AND WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Autodesk
    [Show full text]
  • Innovationen (&25$ Geräte Für Haus Und Garten $7,/$ +$&2 .$3)(5 :,/' (/(0(176 Dämmung
    Willkommen zur BAU 2011! Neue Öffnungszeiten: New opening hours: Eingang Nord Eingang Nord-West www.ytong-silka.de Montag – Freitag: 9.30 –18.30 Uhr Monday – Friday: 9.30 am – 6.30 pm North West Entrance Welcome to BAU 2011! North Entrance Samstag: 9.30 –17.00 Uhr Saturday: 9.30 am – 5.00 pm Mehr als nur The future of building Stand: 28. Okt. 2010 As of : 28 Oct. 2010 ein Fenster! Herzlich willkommen zur EgoKiefer Innovationsshow: Halle C4, Stand 330 Die Aussteller der BAU 2011 auf einen Blick ,1'8 %81' 9, 0(7$/ 52'(&$ 6&+8+ /,686 Exhibitors at BAU 2011 0$6&+ 62)7 */$6 at a glance Erfahren Sie mehr über Dämmsteine SauberFuge! *(/%(5 %81'(6 '5 in Halle A2, Stand 103. %., 5272; %,(*(5 :(5%(6 9(5%$1' 3$571(5 ''7%$8*( *5$8/( =)g5'(581* 6&+,//(5 &6. *(6(//6&+$)7 6,&857(& /$0 %$862)7 *5,36 %(57 $XI,7 JHEDXW ./$(6 Dämmsteine – immer wieder richtig. )/,5 +2567 3$5$',(6 *,5$ ('9&$' :$5( 6h'0(7$// %2; :$5( 62)7:$5( '(5,;*/$6 527+ 6<67(06 6(&&2 ® $6 Deutsche Gesellschaft für Nachhaltiges Bauen e.V. .(*(/ German Sustainable Building Council *5b%(57 . %$. 678',26 (9 7(&+12 6,67(0, /8021 6<67(0( 26'$7(1 %$868 6&+8/7(1 Mehr Licht zum Leben 77. '(876&+/$1' &<&27 67,()(/ :,/.(6 %(,1 +$6(1 672&.(57 ',*,7$/ 6&+,)7 35,17 &21 $/3+$ 6,3$5 -81* $67$ ® 67(/ *+8 %$8(5 6<67(0 67(,1'/*/$6 62)7:$5( %21.
    [Show full text]
  • Building Information Modeling and Its Impact on Design and Construction Firms
    BUILDING INFORMATION MODELING AND ITS IMPACT ON DESIGN AND CONSTRUCTION FIRMS By JOSEPH CARL KUEHMEIER A THESIS PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN BUILDING CONSTRUCTION UNIVERSITY OF FLORIDA 2008 1 ©2008 Joseph Carl Kuehmeier 2 To my wife and family, for keeping me focused on the prize, and for giving me the opportunity to better myself. To them I will be forever grateful. 3 ACKNOWLEDGMENTS I would like to thank the School of Building Construction for accepting me into their program and the faculty for passing their knowledge and life experiences to me. I would like to thank Dr. R. Raymond Issa, Dr. Svetlana Olbina, and Dr. E. Douglas Lucas for serving as my committee members. Their knowledge and direction were critical to the completion of my thesis. I would like to thank my family, for without their support, I would not be finishing school right now. They have been the foundation and all that I have done is in honor of them and their support. 4 TABLE OF CONTENTS page ACKNOWLEDGMENTS ...............................................................................................................4 LIST OF TABLES...........................................................................................................................7 LIST OF FIGURES .........................................................................................................................8 ABSTRACT.....................................................................................................................................9
    [Show full text]
  • 1 Building Information Modeling in Support Of
    BUILDING INFORMATION MODELING IN SUPPORT OF SUSTAINABLE DESIGN AND CONSTRUCTION By WILLIAM PATRICK BYNUM II A THESIS PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN BUILDING CONSTRUCTION UNIVERSITY OF FLORIDA 2010 1 © 2010 William Patrick Bynum II 2 To my family and friends Vigilando, agendo, bene consulendo, prospera omnia cedunt 3 ACKNOWLEDGMENTS First and foremost, I would like to thank my thesis committee members, Dr. Raymond Issa, Dr. Svetlana Olbina, and Dr. Ian Flood for their continual guidance through the process of this research. Their expertise in the field of building information modeling as well as sustainability helped provide the framework for this investigation and for their advice and direction I am grateful. I would like to thank the University of Virginia School of Architecture and its faculty for establishing the foundation of my education in both digital modeling and sustainable design. Without my education at UVA I would not be the student or individual that I am today, and for that I am entirely grateful. Finally, I would like to thank my family and friends for their support in everything I have accomplished so far. Without you I would not be able to achieve the goals I set forth so early in my lifetime. Through your patience and eternal guidance I know that I will forever be able to depend on you for support. 4 TABLE OF CONTENTS Page ACKNOWLEDGMENTS .................................................................................................. 4 LIST OF TABLES ............................................................................................................ 9 LIST OF FIGURES ........................................................................................................ 11 LIST OF ABBREVIATIONS ........................................................................................... 15 ABSTRACT ..................................................................................................................
    [Show full text]
  • Overlay with Design Management For
    ARCHIBUS® Extensions in Framework Overlay with Design Management for AutoCAD® & Revit® Link drawings to facilities and infrastructure data bi-directionally, synchronizing updates to each environment for improved accuracy and productivity The task of separately managing drawings and alphanumeric Activities and Features include: data is often an inefficient duplication of effort. Ensuring a Create Occupancy Plan facility or infrastructure drawing also contains information on Highlight Rooms by Department associated assets and people is critical, particularly with the Populate Employees to Rooms Highlight Restriction inevitable updates and changes that can occur on a daily basis. Query Table The ARCHIBUS Overlay with Design Management for AutoCAD® Query Text Insert Furniture Standards & Revit® seamlessly integrates drawings and alphanumeric data Insert Equipment with Autodesk’s AutoCAD®, AutoCAD® Architecture, and Revit® Create New Trial Drawing Publish to DWF Architecture environments. The result is a single, unified Area Trace information environment for managing facilities and Plus Many More... infrastructure that improves productivity and data accuracy, while leveraging your existing investment in Autodesk tools. Benef its • Expands capabilities into Building Information Modeling (BIM) to improve lifecycle management • Increases accuracy of information through visualization and simultaneous updates to Autodesk applications and the ARCHIBUS database environment • Improves productivity by expediting the creation of working drawings with
    [Show full text]