DOCSLIB.ORG

Connectivity and Integration - Chassis Systems As Chassis Systems Become Increasingly More Electronically Driven

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Connectivity and Integration - Chassis Systems As Chassis Systems Become Increasingly More Electronically Driven Connectivity and Integration - Chassis Systems As chassis systems become increasingly more electronically driven, Delphi is there to help bridge the transition to the future. Our expertise is found in emerging product lines such as electrical steering and brake-by- wire. Today, we offer a wide range of innovative components along with their linking technologies. Our connection systems, sensors, switches and actuators help provide essential data and control for all major chassis systems – braking, steering, and suspension. 2. Delphi Connection Systems Chassis Systems Brake Systems ABS Braking Systems Quality-built Delphi connectors are commonly found in anti-lock braking systems (ABS) around the world. This vehicle system B. exerts control over all four wheels during A. braking to help prevent wheel lock-up. ABS Electronic Control Modules – Delphi offers connectors for electronic A. ABS electronic control modules with the ability to help control optimize the ABS design for any vehicle B. GT 150 & 280 type. connection systems C. C. 26-way ABS ABS Sensors & Actuators – D. connector Delphi connections help to link together ABS D. BTS 1.5 mm terminal components including wheel speed sensors, toothed coding rings and hydraulic modulators. Tr action Control Traction Control – E. GT 150 series The traction control function is typically F. MicroHVT 16-way implemented as an extension of ABS to help minimize wheel spin. E. Delphi began its long tradition of industry firsts with F. the first bicycle coaster brake in 1897. Delphi Connection Systems can assist Brake-by-Wire G. in linking various components found in G. Electric calipers for brake-by-wire emerging braking technologies. H. Micro64 connection systems I. Insulation Displacement Connection (IDC) Brake-by-Wire – Brake-by-wire eliminates the need for a I. direct mechanical / hydraulic link between the brake pedal and brakes. Sensors on the brake pedal determine braking pressure H. being applied by the driver. Electric Parking Brake Electric Parking Brake – J. & K. Ducon™ Parking brake that is applied by an electrical connection device rather than a traditional manual systems cable / ratchet mechanism. L. Micro-Pack 100 L. J. K. Chassis Systems • www.delphi.com/connect 3. A. Electronic Load Leveling B. Suspension A. Semi-active Delphi's sealed connection systems can suspension provide valuable sealing capabilities to ™ B. Metri-Pack 800 suspension components subjected to C. C. ACS 2-way harsh road and environmental conditions. connector D. High Power 100 amp Electronic Load Leveling – D. E. MTS male Delphi is one of the world’s leading terminals E. suppliers of leveling systems, which are designed to adjust the height of a vehicle's rear suspension. G. F. Vehicle Stability Control Vehicle Stability Control (VSC/ ESD) – F. Electronic Stability The VSC / ESD function allows wheels to Control 2.0 brake independently to maintain vehicle G. Micro64 stability. Electronic Shock Damping H. GT with Lever Lock adjusts spring rate and damping characteristics of the shock absorbers, to improve vehicle H. stability. In 1951, Delphi revolutionized steering systems Electric Power by introducing power steering. I. Steering J. Steering I. & J. Electric Delphi's connection steering system systems can be designed to help support K. Power Pack the high current demands of electric L. Ducon™ 9.5 steering systems. terminals Delphi also offers, M. MTS-B terminal steering wheels with electronic fingertip Electric Power Steering/ accessory controls & F our-Wheel Steering – switches Electrically-powered steering systems utilize electric motors, rather than hydraulics, to generate steering power L. M. assist. K. Steer-by-Wire N. O. Steer-by-Wire – This system requires an electronic link N. GT 150 between the steering column and the O. Steer-by-Wire, electric motor which powers the steering. an advanced technology enabled by electronic sensing and actuators 4. Chassis Systems PRODUCT FAMILIES Sealed Signal Device High Power Headers Connect- Power Headers (sealed) ions Other Maxi-Fuse GT Micro64 GT Battery 800 terminals Metri-Pack™ Metri-Pack™ Micro-Pack 064 Metri-Pack™ Splice clips Ducon ACS MicroHVT ACS Cable seals GT DSQ MTS DSQ IDC Power Pack BTS Micro-Pack BTS CTS Ducon™ CTS PRODUCTS Ducon™ Brake Systems ABS electronic module ABS system sensors and actuators Traction control Brake-by-Wire Electric parking brake Suspension Load leveling Vehicle Stability Control (VSC) APPLICATIONS Steering Electric power steering Steer-by-Wire The products and applications within this brochure are presented For additional product information and application support, as a reference guide only. Other Delphi Connection Systems' please contact your local Delphi Connection Systems' sales products may also apply to the application categories presented representative or contact us directly at [1] 248.813.2334, or herein. In addition, these and other Delphi products may be visit our website at www.delphi.com/connect. available for other similar application categories not represented in this brochure. 5. Delphi Connection Systems Automotive and Transportation Products 5725 Delphi Drive M/C 483.400.301 Troy, Michigan 48098-2815 U.S.A. Tel: [1] 248.813.2334 Fax: [1] 248.813.2333 Military Products 17150 Von Karman Avenue Irvine, California 92614 U.S.A. Tel: [1] 949.660.5701 Fax: [1] 949.660.5825 Commercial and Medical Products 19200 Asheville Highway P.O. Box 519 Landrum, South Carolina 29356 U.S.A. Tel: [1] 864.457.3824 Fax: [1] 864.457.2535 Asia Pacific Regional Headquarters 31F Nomura-Buiru 1-26-2 Nishi-Shinjuku, Shinjuku Tokyo, Japan 163-0569 Tel: [81] 3.5381.1700 Fax: [81] 3.5381.1824 European Regional Headquarters Customer Technology Center Vorm Eichholz 1 42119 Wuppertal Germany Tel: [49] 202.291.0 Fax: [49] 202.291.2777 South American Regional Headquarters Av. Goiás, 1860 São Caetano do Sul São Paulo 09550-050 Brazil Tel: [55] 11.4234.9491 Fax: [55] 11.4234.9462 www.delphi.com/connect Delphi Connection Systems reserves the right to improve, enhance and modify the design specifications and construction of Delphi products without prior notification. For additional product and engineering information, contact us at [1] 248.813.2334 or visit our website at www.delphi.com/connect. Printed on Recycled Paper ©2004 Delphi. All rights reserved. DP-05-E-142 1004/Crq500 • 105/Law10m About Delphi. Multi-national Delphi conducts its business operations through various subsidiaries and has headquarters in Troy, Michigan, USA, Paris, Tokyo and São Paulo, Brazil..
Load more

Recommended publications
  • Automotive Solutions for Chassis and Safety Contents
    Automotive Solutions for Chassis and Safety Contents 3 Smart Mobility 4 Chassis and Safety 5 Key Applications 6 Antilock Braking System (ABS) 7 Electronic Stability Control (ESC) 8 Active Suspension 9 Electric Parking Brake (EPB) 10 Electric Power Steering (EPS) 11 Airbag System 12 Electric Brake Booster 13 Key Technologies 15 Development Tools Smart Mobility It is estimated that 80% of all innovations in the automotive industry today are directly or indirectly enabled by electronics. With vehicle functionality improving with every new model this means a continuous increase in the semiconductor content per car. With over 30 years’ experience in automotive electronics, ST is a solid, innovative, and reliable partner with whom to build the future of transportation. ST’s Smart Mobility products and solutions are making driving safer, greener and more connected through the combination of several of our technologies. SAFER Driving is safer thanks to our Advanced Driver Assistance Systems (ADAS) – vision processing, radar, imaging and sensors, as well as our adaptive lighting systems, user display and monitoring technologies. GREENER Driving is greener with our automotive processors for engine management units, engine management systems, high-efficiency smart power electronics at the heart of all automotive sub-systems and devices for hybrid and electric vehicle applications. 80% MORE CONNECTED And vehicles are more connected using our infotainment-system and telematics of all innovations processors and sensors, as well as our radio tuners and amplifiers, positioning in the automotive technologies, and secure car-to-car and car-to-infrastructure (V2X) connectivity solutions. industry today ST supports a wide range of automotive applications, from Powertrain for ICE, Chassis are enabled by and Safety, Body and Convenience to Telematics and Infotainment, paving the way to the electronics new era of car electrification, advanced driving systems and secure car connectivity.
    [Show full text]
  • 5-Speed Manual Transmission Again, Or by Turning the Ignition Do Not Rest Your Foot on the Clutch the Transmission Has Five Fully Key to the "OFF" Position
    5-Speed Manual Transmission again, or by turning the ignition Do not rest your foot on the clutch The transmission has five fully key to the "OFF" position. pedal while driving; this can synchronized forward speeds. The cause the clutch to slip, resulting gear shift pattern is provided on Operation of the "WINTER" in damage to the clutch. mode should be limited to the transmission lever knob. The slippery road conditions only. backup lights turn on when When you are stopped on an Operation of the "WINTER" shifted into the reverse gear. upgrade, do not hold the vehicle mode during normal driving in place by letting the clutch pedal conditions will cause decreased up part-way. Use the foot brake or performance and sluggish the parking brake. acceleration. Never shift into reverse gear until the vehicle is completely stopped. Do not "over-speed" the engine when shifting down to a lower gear. The shift lever cannot be shifted directly from fifth gear into Reverse. When shifting into Reverse gear from fifth gear, Driving Tips depress the clutch pedal and shift completely into Neutral position, Always depress and release the then shift into Reverse gear. clutch pedal fully when shifting. Instruments and Controls Shift Speed Chart For cruising, choose the highest Transfer Control gear for that speed (cruising speed The lower gears of the 4WD Models is defined as a relatively constant transmission are used for normal The "4WD" indicator light speed operation). acceleration of the vehicle to the illuminates when 4WD is engaged desired cruising speed. The The upshift indicator (U/S) lights with the 4WD-2WD switch.
    [Show full text]
  • AST 1 – Line H – Steering Systems
    AST 1 – Line H – Steering Systems 1. What adjustment is made last when performing a rebuild on a recirculating ball steering gear? A. Mesh. B. Over centre. C. Sector shaft end play. D. Worm bearing preload. 2. Which component is part of a rack and pinion steering system? A. Idler arm. B. Center link. C. Tie rod end. D. Pitman Arm. 3. Which component does the sector gear engage with on a steering box? A. Ball nut. B. Idler arm. C. Pitman arm. D. Steering input shaft. 4. Which fault would cause a rack and pinion equipped vehicle to experience a condition known as bump steer? A. Misaligned rack mounts. B. Incorrect mesh adjustment. C. Worn internal rack bushings. D. Lateral wear of the tie rod end. 1 5. Refer to Figure H1 - 1. Which adjustment can be made using these identified parts? Figure H1 - 1 A. Mesh. B. Pinion bearing preload. C. Worm bearing preload. D. Over centre. 6. What is the unique feature of an airbag electrical wiring harness? A. The complete harness is one piece. B. The connectors are a specific colour. C. The connectors are all the same size. D. The harness wires are all the same diameter. 7. Which procedure is used to remove a clockspring? A. Remove the steering wheel, remove the air bag module, disconnect the electrical connections, remove the clockspring. B. Remove the steering wheel, remove the air bag module, wait 30 minutes disconnect the electrical connections, remove the clockspring. C. Disconnect the negative battery cable, remove the airbag module, remove the steering wheel, disconnect the electrical connectors, remove the clockspring.
    [Show full text]
  • Development of Electro-Hydro Automatic Parking Braking System for Automotive System
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-7, Issue-6S, March 2019 Development of electro-hydro automatic parking braking system for automotive system Ataur Rahman, Mohiuddin AKM, Ahsan Sakif Abstract--- A parking brake is an important tool of any transmission vehicles [1,2]. In some places it is required by automotive system. Conventional parking brake systems requires law to leave the parking brake on when parking. However, the driver to manually pull the lever if the brakes are to be many people still ignore such instructions. Parking vehicles applied. To some extent, the vehicle is left without applying the on hills or inclines surface without engaging the parking the parking brake due to the insensibility, which could make the vehicle in danger if there any gradient of the road and strong parking brake can cause the vehicle to roll back and damage wind. The aim of this manuscript is to present an automatic other vehicles or structure behind [. In such cases in some electro-hydro parking braking system which brakes once the countries, like Germany the insurance company is not vehicle park. This is developed by associating the wheel speed required to cover such damages [3]. The parking brakes sensors, accelerator proximity sensors, controller, and a linear should always be used when we want the vehicle to remain actuator. This electro-hydro automatic parking braking system motionless. Using the parking brakes to stop or slow down a automatically brakes the vehicle when it parks. It ensures the vehicle to remain stationary when it is parked and prevents speeding car when the foot-operated brakes are still vehicle rollaway or any unwanted movement that might occur.
    [Show full text]
  • Adaptive Brake by Wire from Human Factors to Adaptive Implementation
    UNIVERSITY OF TRENTO Doctoral School in Engineering Of Civil And Mechanical Structural Systems Adaptive Brake By Wire From Human Factors to Adaptive Implementation Thesis Tutor Doctoral Candidate Prof. Mauro Da Lio Andrea Spadoni Mechanical and Mechatronic Systems December 2013 - XXV Cycle 1 Adaptive Brake By Wire From Human Factors to Adaptive Implementation 2 Adaptive Brake By Wire From Human Factors to Adaptive Implementation Table of contents TABLE OF CONTENTS .............................................................................................................. 3 LIST OF FIGURES .................................................................................................................... 6 LIST OF TABLES ...................................................................................................................... 8 GENERAL OVERVIEW .............................................................................................................. 9 INTRODUCTION ................................................................................................................... 12 1. BRAKING PROCESS FROM THE HUMAN FACTORS POINT OF VIEW .................................... 15 1.1. THE BRAKING PROCESS AND THE USER -RELATED ASPECTS ......................................................................... 15 1.2. BRAKE ACTUATOR AS USER INTERFACE ................................................................................................. 16 1.3. BRAKE FORCE ACTUATION : GENERAL MOVEMENT -FORCE DESCRIPTION ......................................................
    [Show full text]
  • Electric Parking Brake PARTS LIST/INSTALLATION INSTRUCTION MANUAL
    Electric Parking Brake PARTS LIST/INSTALLATION INSTRUCTION MANUAL 3 7 Daniel Road West, Fairfield, NJ 07004 E-mail: [email protected] Phone: (973) 808-9709 Fax: (973) 808-9713 Web: www.drive-master.com NSEPB 001/11 Mobility Dealer and Installing Tech Thank you for the purchase of this product. Please familiarize yourself with these instructions, they have changed to reflect the redesigned product and wiring for all vehicles. Before starting the installation of the Drive- Master Electric Park Brake check to make sure the OEM indicator light works when engaging the OEM emergency brake pedal. As you will be modifying the OEM emergency brake assembly you will also need to confirm that when the emergency brake is engaged it will not allow the vehicle to roll while in gear with the engine running. If the vehicle has any problems related to the use of the OEM emergency brake they should be repaired before attempting the installation. Please read through the installation instructions before attempting the installation. Any questions that arise during installation please call for technical assistance (973) 808-9709 Monday-Friday 8:00 AM-4:30 PM EST. If you follow step by step as instructed, you will not encounter diffi- culties and will have a proper installation. Thank you for supporting Drive-Master Products. Yours in mobility, President 2 3 If your OEM dash brake light indicator stays on after the Park Brake is released and the D.M. Park Brake has been checked over for proper installation and wiring, you will need to have your brake system inspected by an authorized OEM dealer.
    [Show full text]
  • Power Steering Torsion Bar Modification
    INFORMATION SHEET # 02 - 2007 (V1 April 2007) Power Steering Torsion Bar Modification Background: From time to time, people carry out the procedure of modifying the rack and pinion or steering box torsion bar inside the rotary valve to change the amount of steering assistance available to the driver. There are two common reasons for doing this: 1. to provide more power assistance for people who have a physical disability that affects their ability to turn the steering wheel; and 2. to decrease the amount of power steering assistance in 1950s and 1960’s American vehicles to give the driver more steering ‘feel’. For this reason, it is necessary to firstly confirm that such modifications do in fact require LVV certification, and secondly to provide some clarification on what is required to be assessed during the LVV certification process. About power assist steering systems: Most power steering assemblies are hydraulic/mechanical units. An internal rotary valve directs power steering fluid flow, and controls pressure to reduce the amount of steering effort required to turn the wheels. Rotary Valve: A power steering system should assist the driver only when he is exerting force on the steering wheel (such as during a turn). When the driver is not exerting force (such as when driving in a straight line), the system shouldn't provide any assistance. The device that senses the amount of force being applied on the steering wheel is called a rotary valve. Torsion bar: The key to the rotary valve is a torsion bar. The torsion bar is a thin steel rod that twists when torque is applied to it.
    [Show full text]
  • A Novel Chassis Concept for Power Steering Systems Driven by Wheel Individual Torque at the Front Axle M
    25th Aachen Colloquium Automobile and Engine Technology 2016 1 A Novel Chassis Concept For Power Steering Systems Driven By Wheel Individual Torque At The Front Axle M. Sc. Philipp Kautzmann Karlsruhe Institute of Technology, Institute of Vehicle System Technology, Karlsruhe, Germany M. Sc. Jürgen Römer Schaeffler Technologies AG & Co. KG, Karlsruhe, Germany Dr.-Ing. Michael Frey Karlsruhe Institute of Technology, Institute of Vehicle System Technology, Karlsruhe, Germany Dr.-Ing. Marcel Ph. Mayer Schaeffler Technologies AG & Co. KG, Karlsruhe, Germany Summary The project "Intelligent Assisted Steering System with Optimum Energy Efficiency for Electric Vehicles (e²-Lenk)" focuses on a novel assisted steering concept for electric vehicles. We analysed different suspensions to use with this innovative power steering concept driven by wheel individual drive torque at the front axle. Our investigations show the potential even for conventional suspensions but reveal the limitations of standard chassis design. Optimized suspension parameters are needed to generate steering torque efficiently. Requirements arise from emergency braking, electronic stability control systems and the potential of the suspension for the use with our steering system. In lever arm design a trade-off between disturbing and utilizable forces occurs. We present a new design space for a novel chassis layout and discuss a first suspension design proposal with inboard motors, a small scrub radius and a big disturbance force lever arm. 1 Introduction Electric vehicles are a promising opportunity to reduce local greenhouse gas emissions in transport and increase overall energy efficiency, as electric drivetrain vehicles operate more efficiently compared to conventionally motorized vehicles. The internal combustion engine of common vehicles not only accelerates the vehicle, but also supplies energy to on-board auxiliary systems, such as power-assisted steering, which reduces the driver’s effort at the steering wheel.
    [Show full text]
  • Combined Brake and Steering Actuator for Automatic Vehicle Control
    CALIFORNIA PATH PROGRAM INSTITUTE OF TRANSPORTATION STUDIES UNIVERSITY OF CALIFORNIA, BERKELEY Combined Brake and Steering Actuator for Automatic Vehicle Control R. Prohaska, P. Devlin California PATH Working Paper UCB-ITS-PWP-98-15 This work was performed as part of the California PATH Program of the University of California, in cooperation with the State of California Business, Transportation, and Housing Agency, Department of Trans- portation; and the United States Department Transportation, Federal Highway Administration. The contents of this report reflect the views of the authors who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the State of California. This report does not constitute a standard, specification, or regulation. Report for MOU 331 August 1998 ISSN 1055-1417 CALIFORNIA PARTNERS FOR ADVANCED TRANSIT AND HIGHWAYS Combined Brake and Steering Actuator for Automatic Vehicle Research y R. Prohaska and P. Devlin University of California PATH, 1357 S. 46th St. Richmond CA 94804 Decemb er 8, 1997 Abstract A simple, relatively inexp ensive combined steering and brake actuator system has b een develop ed for use in automatic vehicle control research. It allows a standard passenger car to switch from normal manual op eration to automatic op eration and back seamlessly using largely standard parts. The only critical comp onents required are twovalve sp o ols which can b e made on a small precision lathe. All other parts are either o the shelf or can b e fabricated using standard shop to ols. The system provides approximately 3 Hz small signal steering bandwidth combined with 90 ms large signal brake pressure risetime.
    [Show full text]
  • Parking Brake Pb
    PARKING BRAKE PB Page 1. General Description ....................................................................................2 2. Parking Brake Lever....................................................................................6 3. Parking Brake Cable ...................................................................................7 4. Parking Brake Assembly (Rear Disc Brake) ...............................................8 5. General Diagnostic Table..........................................................................11 GENERAL DESCRIPTION PARKING BRAKE 1. General Description A: SPECIFICATIONS Model Rear drum brake Rear disc brake Type Mechanical on rear brakes, drum in disc Effective drum diameter mm (in) 228.6 (9) 170 (6.69) Lining dimensions 219.4 × 35.0 × 4.1 163.1 × 30.0 × 3.2 mm (in) (length × width × thickness) (8.64 × 1.378 × 0.161) (6.42 × 1.181 × 0.126) Clearance adjustment Automatic adjustment Manual adjustment Lever stroke notches/N (kgf, lb) 7 to 8/196 (20, 44) PB-2 GENERAL DESCRIPTION PARKING BRAKE B: COMPONENT 1. PARKING BRAKE (REAR DISC BRAKE) PB-00001 (1) Back plate (8) Strut (15) Shoe hold-down spring (2) Retainer (9) Shoe guide plate (16) Shoe hold-down pin (3) Spring washer (10) Primary return spring (17) Adjusting hole cover (4) Lever (11) Secondary return spring (5) Parking brake shoe (Primary) (12) Adjusting spring Tightening torque: N·m (kgf-m, ft-lb) (6) Parking brake shoe (Secondary) (13) Adjuster T: 53 (5.4, 39.1) (7) Strut spring (14) Shoe hold-down cup PB-3 GENERAL DESCRIPTION PARKING BRAKE 2. PARKING BRAKE CABLE PB-00002 (1) Parking brake lever (7) Clamp Tightening torque: N·m (kgf-m, ft-lb) (2) Parking brake switch (8) Parking brake cable RH T1: 5.9 (0.6, 4.3) (3) Lock nut (9) Cable guide T2: 18 (1.8, 13.0) (4) Adjusting nut (10) Clamp (Rear disc brake model T3: 32 (3.3, 23.6) (5) Equalizer only) (6) Bracket (11) Parking brake cable LH PB-4 GENERAL DESCRIPTION PARKING BRAKE C: CAUTION • Wear working clothing, including a cap, protec- tive goggles, and protective shoes during opera- tion.
    [Show full text]
  • Electric Parking Brake Apply the Electric Parking Brake As You're Getting Ready to Step out of the Vehicle Once Your Drive Is
    DRIVING Electric Parking Brake Apply the electric parking brake as you’re getting ready to step out of the vehicle once your drive is complete. To apply: Pull up the switch. The BRAKE indicator appears in the instrument panel. Hold the switch up for emergency braking while the vehicle is moving. To release: Press the brake pedal and make sure Pull up to apply. your seat belt is fastened. Press the switch down to release. Or, release by lightly pressing the accelerator pedal (and release the clutch pedal for manual transmission) while the vehicle is in gear. Press down to release. DRIVING Automatic Brake Hold Use brake hold to make stop-and-go driving easier. It maintains rear brake hold even after the brake pedal is released. Make sure the vehicle is on and your seat belt is fastened when operating this feature. 1. Press the BRAKE HOLD button, to the left of the shift lever. The BRAKE HOLD indicator appears in the instrument panel. 2. With the shift lever in Drive (D) or Neutral (N), press the brake pedal and come to a complete stop. The HOLD indicator appears, and brake hold is applied. Release the brake pedal. Press the accelerator pedal (or shift into a gear and release the clutch pedal for manual transmission) to cancel brake hold and start moving. To turn off brake hold: Press the brake pedal and press the BRAKE HOLD button again. Automatic brake hold cancels • The foot brake is pressed and the shift when: lever is moved to P or R. • Braking is applied for more than • The engine stalls (manual 10 minutes.
    [Show full text]
  • 2019 RAM Commercial Promaster Owner's Manual
    2019 PROMASTER OWNER’S MANUAL VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name features and equipment that are either standard or op- FCA US LLC shall be deemed to be deleted and the name tional on this vehicle. This manual may also include a FCA Canada Inc. used in substitution therefore. description of features and equipment that are no longer DRIVING AND ALCOHOL available or were not ordered on this vehicle. Please Drunken driving is one of the most frequent causes of disregard any features and equipment described in this accidents. manual that are not on this vehicle. Your driving ability can be seriously impaired with blood FCA US LLC reserves the right to make changes in design alcohol levels far below the legal minimum. If you are and specifications, and/or make additions to or improve- drinking, don’t drive. Ride with a designated non- ments to its products without imposing any obligation drinking driver, call a cab, a friend, or use public trans- upon itself to install them on products previously manu- portation. factured. WARNING! Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive. Copyright © 2018 FCA US LLC SECTION TABLE OF CONTENTS PAGE 1 1 INTRODUCTION ...................................................................3 2 2 GRAPHICAL TABLE OF CONTENTS ......................................................7
    [Show full text]