DOCSLIB.ORG

Expand Your Coverage with a Pro Certified Lifetime Wrap!

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Expand Your Coverage with a Pro Certified Lifetime Wrap! This is what’s included Enhance Your Vehicle’s in your Pro Certified Lifetime Limited Lifetime Limited Powertrain Warranty Warranty: Coverage Your Pro Certified Lifetime Limited Warranty covers repairs for mechanical failures of powertrain components. By adding a Lifetime “wrap” service contract, you can drive with confidence that comes from having our most comprehensive coverage. PRO CERTIFIED LIFETIME WRAP® ENGINE TRANSMISSION INCLUDED WITH WRAP COVERAGE Cylinder block Cooler and metal cooler lines Cylinder head(s) Manual clutch assembly slave EGR valve cylinder and master cylinder Torque converter Engine mounts Roadside assistance Exhaust manifold(s) Transaxle case Flywheel or flexplate Transfer case and internal parts Call our toll-free number for 24/7 sign- Harmonic balancer Transmission case and-drive service offering up to $50 per Transmission mounts Intake manifold occurrence or up to $150 for towing. Or, Intercooler Vacuum modulator you can call your own provider and we will Oil pan reimburse you up to these dollar limits. Oil pump DRIVETRAIN Ring gear ASSEMBLY Administered by Rotor housings and internal parts 4x4 locking hub Timing chain(s) or belt(s) Axle shafts and bearings EXPAND YOUR Rental car reimbursement Timing chain or belt tensioner(s) and timing chain or belt cover Center bearings and drive shaft yokes $50 per day with a maximum of $350 Timing gears COVERAGE Control processor and sensors total for a rental vehicle when a covered Turbocharger or supercharger housing(s) and internal parts Drive shaft(s) 4150 N. Drinkwater Blvd. Suite 400 Scottsdale, AZ 85251 Enhance your warranty breakdown occurs. Vacuum pump Final drive and axles housing(s) (800) 345-0191 and internal parts for both front- and help reduce repair costs. Valve cover(s) and rear-wheel drive This is not a contract. Please see contract for obligations, conditions, limitations, exclusions and state-specific provisions Wastegate Four-wheel drive engagement Water pump actuator/motor that may change your coverage or benefits. This product is not Travel and lodging reimbursement insurance. Service Contract Providers: Dealers, Continental Service Solenoids Provider, Inc.; Continental Service Plan, Inc.; or in Florida by CNA Meals and lodging up to $100 per day, with a Traction control linkage National Warranty Corporation-Florida, license #60098 maximum of $300 per occurrence, if you are Universal and constant velocity joints stranded more than 100 miles from home due to a covered breakdown. ©2020 CNA National Warranty Corporation 9220 (01/20) This is what’s included Enhance Your Vehicle’s in your Pro Certified Lifetime Limited Lifetime Limited Powertrain Warranty Warranty: Coverage Your Pro Certified Lifetime Limited Warranty covers repairs for mechanical failures of powertrain components. By adding a Lifetime “wrap” service contract, you can drive with confidence that comes from having our most comprehensive coverage. PRO CERTIFIED LIFETIME WRAP® ENGINE TRANSMISSION INCLUDED WITH WRAP COVERAGE Cylinder block Cooler and metal cooler lines Cylinder head(s) Manual clutch assembly slave EGR valve cylinder and master cylinder Torque converter Engine mounts Roadside assistance Exhaust manifold(s) Transaxle case Flywheel or flexplate Transfer case and internal parts Call our toll-free number for 24/7 sign- Harmonic balancer Transmission case and-drive service offering up to $50 per Transmission mounts Intake manifold occurrence or up to $150 for towing. Or, Intercooler Vacuum modulator you can call your own provider and we will Oil pan reimburse you up to these dollar limits. Oil pump DRIVETRAIN Ring gear ASSEMBLY Administered by Rotor housings and internal parts 4x4 locking hub Timing chain(s) or belt(s) Axle shafts and bearings EXPAND YOUR Rental car reimbursement Timing chain or belt tensioner(s) and timing chain or belt cover Center bearings and drive shaft yokes $50 per day with a maximum of $350 Timing gears COVERAGE Control processor and sensors total for a rental vehicle when a covered Turbocharger or supercharger housing(s) and internal parts Drive shaft(s) 4150 N. Drinkwater Blvd. Suite 400 Scottsdale, AZ 85251 Enhance your warranty breakdown occurs. Vacuum pump Final drive and axles housing(s) (800) 345-0191 and internal parts for both front- and help reduce repair costs. Valve cover(s) and rear-wheel drive This is not a contract. Please see contract for obligations, conditions, limitations, exclusions and state-specific provisions Wastegate Four-wheel drive engagement Water pump actuator/motor that may change your coverage or benefits. This product is not Travel and lodging reimbursement insurance. Service Contract Providers: Dealers, Continental Service Solenoids Provider, Inc.; Continental Service Plan, Inc.; or in Florida by CNA Meals and lodging up to $100 per day, with a Traction control linkage National Warranty Corporation-Florida, license #60098 maximum of $300 per occurrence, if you are Universal and constant velocity joints stranded more than 100 miles from home due to a covered breakdown. ©2020 CNA National Warranty Corporation 9220 (01/20) This is what’s included Enhance Your Vehicle’s in your Pro Certified Lifetime Limited Lifetime Limited Powertrain Warranty Warranty: Coverage Your Pro Certified Lifetime Limited Warranty covers repairs for mechanical failures of powertrain components. By adding a Lifetime “wrap” service contract, you can drive with confidence that comes from having our most comprehensive coverage. PRO CERTIFIED LIFETIME WRAP® ENGINE TRANSMISSION INCLUDED WITH WRAP COVERAGE Cylinder block Cooler and metal cooler lines Cylinder head(s) Manual clutch assembly slave EGR valve cylinder and master cylinder Torque converter Engine mounts Roadside assistance Exhaust manifold(s) Transaxle case Flywheel or flexplate Transfer case and internal parts Call our toll-free number for 24/7 sign- Harmonic balancer Transmission case and-drive service offering up to $50 per Transmission mounts Intake manifold occurrence or up to $150 for towing. Or, Intercooler Vacuum modulator you can call your own provider and we will Oil pan reimburse you up to these dollar limits. Oil pump DRIVETRAIN Ring gear ASSEMBLY Administered by Rotor housings and internal parts 4x4 locking hub Timing chain(s) or belt(s) Axle shafts and bearings EXPAND YOUR Rental car reimbursement Timing chain or belt tensioner(s) and timing chain or belt cover Center bearings and drive shaft yokes $50 per day with a maximum of $350 Timing gears COVERAGE Control processor and sensors total for a rental vehicle when a covered Turbocharger or supercharger housing(s) and internal parts Drive shaft(s) 4150 N. Drinkwater Blvd. Suite 400 Scottsdale, AZ 85251 Enhance your warranty breakdown occurs. Vacuum pump Final drive and axles housing(s) (800) 345-0191 and internal parts for both front- and help reduce repair costs. Valve cover(s) and rear-wheel drive This is not a contract. Please see contract for obligations, conditions, limitations, exclusions and state-specific provisions Wastegate Four-wheel drive engagement Water pump actuator/motor that may change your coverage or benefits. This product is not Travel and lodging reimbursement insurance. Service Contract Providers: Dealers, Continental Service Solenoids Provider, Inc.; Continental Service Plan, Inc.; or in Florida by CNA Meals and lodging up to $100 per day, with a Traction control linkage National Warranty Corporation-Florida, license #60098 maximum of $300 per occurrence, if you are Universal and constant velocity joints stranded more than 100 miles from home due to a covered breakdown. ©2020 CNA National Warranty Corporation 9220 (01/20) Expand your coverage with a Pro Certified Lifetime Wrap! FOUR-WHEEL STEERING Fuel tank o-ring BRAKES ELECTRICAL POWERTRAIN CONVENIENCE VEHICLE OCCUPANT SEALS & Center shaft ELECTRONICS Metal fuel lines ACCESSORIES HARDWARE RESTRAINT GASKETS Power cylinder Alternator bearings Throttle body MANUAL & POWER Air control solenoid Anti-theft system Seat belt(s) Axle gasket(s) Alternator brushes Throttle body gaskets Ash tray and bracket Steering gear housing BRAKES Air flow meter components Seat belt buckles/latches Axle seal(s) Throttle linkage Bumper impact Steering pump Alternator diodes Bluetooth connectivity Accumulator Air regulator valve absorbers Seat belt buckle switch Cam housing gasket(s) Alternator field coils Throttle plate Steering rack assembly Barometric pressure Convertible top frame Courtesy light switches Seat belt buckle Compressor gaskets Backing plate Throttle shaft Stepper motor Alternator housing sensor Heated seat elements retractors/tensioners Brake adjusters Door hinges Compressor line o-rings Stepper motor control Alternator mounting bracket Coolant sensor Heated steering wheel Seat belt pretensioner Brake pedal Door linkages Compressor seals processor Alternator pulley Cooling fan control Horn Seat belt motors With the advanced technology in today’s vehicles, repairs Brake pedal apply pin INTERIOR Door strikers CV joint boots Stepper motor sensors Alternator rotor processor ELECTRONICS Horn relay Seat belt reminder buzzer Brake pedal lever Gas tank door latch Cylinder head gasket(s) can be costly and unpredictable. Even one mechanical Backup light switch Cooling fan sensors Keyless entry module Seat belt reminder lamp Brake pedal pivot Amplifiers Gas tank door release Differential gasket(s) breakdown could result in thousands of dollars in unplanned Brake light switch Crankshaft position Power antenna motor cable INTERIOR Brake wear sensors sensor Cruise
Load more

Recommended publications
  • 5-Speed Manual Transmission Again, Or by Turning the Ignition Do Not Rest Your Foot on the Clutch the Transmission Has Five Fully Key to the "OFF" Position
    5-Speed Manual Transmission again, or by turning the ignition Do not rest your foot on the clutch The transmission has five fully key to the "OFF" position. pedal while driving; this can synchronized forward speeds. The cause the clutch to slip, resulting gear shift pattern is provided on Operation of the "WINTER" in damage to the clutch. mode should be limited to the transmission lever knob. The slippery road conditions only. backup lights turn on when When you are stopped on an Operation of the "WINTER" shifted into the reverse gear. upgrade, do not hold the vehicle mode during normal driving in place by letting the clutch pedal conditions will cause decreased up part-way. Use the foot brake or performance and sluggish the parking brake. acceleration. Never shift into reverse gear until the vehicle is completely stopped. Do not "over-speed" the engine when shifting down to a lower gear. The shift lever cannot be shifted directly from fifth gear into Reverse. When shifting into Reverse gear from fifth gear, Driving Tips depress the clutch pedal and shift completely into Neutral position, Always depress and release the then shift into Reverse gear. clutch pedal fully when shifting. Instruments and Controls Shift Speed Chart For cruising, choose the highest Transfer Control gear for that speed (cruising speed The lower gears of the 4WD Models is defined as a relatively constant transmission are used for normal The "4WD" indicator light speed operation). acceleration of the vehicle to the illuminates when 4WD is engaged desired cruising speed. The The upshift indicator (U/S) lights with the 4WD-2WD switch.
    [Show full text]
  • Development of Electro-Hydro Automatic Parking Braking System for Automotive System
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-7, Issue-6S, March 2019 Development of electro-hydro automatic parking braking system for automotive system Ataur Rahman, Mohiuddin AKM, Ahsan Sakif Abstract--- A parking brake is an important tool of any transmission vehicles [1,2]. In some places it is required by automotive system. Conventional parking brake systems requires law to leave the parking brake on when parking. However, the driver to manually pull the lever if the brakes are to be many people still ignore such instructions. Parking vehicles applied. To some extent, the vehicle is left without applying the on hills or inclines surface without engaging the parking the parking brake due to the insensibility, which could make the vehicle in danger if there any gradient of the road and strong parking brake can cause the vehicle to roll back and damage wind. The aim of this manuscript is to present an automatic other vehicles or structure behind [. In such cases in some electro-hydro parking braking system which brakes once the countries, like Germany the insurance company is not vehicle park. This is developed by associating the wheel speed required to cover such damages [3]. The parking brakes sensors, accelerator proximity sensors, controller, and a linear should always be used when we want the vehicle to remain actuator. This electro-hydro automatic parking braking system motionless. Using the parking brakes to stop or slow down a automatically brakes the vehicle when it parks. It ensures the vehicle to remain stationary when it is parked and prevents speeding car when the foot-operated brakes are still vehicle rollaway or any unwanted movement that might occur.
    [Show full text]
  • Adaptive Brake by Wire from Human Factors to Adaptive Implementation
    UNIVERSITY OF TRENTO Doctoral School in Engineering Of Civil And Mechanical Structural Systems Adaptive Brake By Wire From Human Factors to Adaptive Implementation Thesis Tutor Doctoral Candidate Prof. Mauro Da Lio Andrea Spadoni Mechanical and Mechatronic Systems December 2013 - XXV Cycle 1 Adaptive Brake By Wire From Human Factors to Adaptive Implementation 2 Adaptive Brake By Wire From Human Factors to Adaptive Implementation Table of contents TABLE OF CONTENTS .............................................................................................................. 3 LIST OF FIGURES .................................................................................................................... 6 LIST OF TABLES ...................................................................................................................... 8 GENERAL OVERVIEW .............................................................................................................. 9 INTRODUCTION ................................................................................................................... 12 1. BRAKING PROCESS FROM THE HUMAN FACTORS POINT OF VIEW .................................... 15 1.1. THE BRAKING PROCESS AND THE USER -RELATED ASPECTS ......................................................................... 15 1.2. BRAKE ACTUATOR AS USER INTERFACE ................................................................................................. 16 1.3. BRAKE FORCE ACTUATION : GENERAL MOVEMENT -FORCE DESCRIPTION ......................................................
    [Show full text]
  • Electric Parking Brake PARTS LIST/INSTALLATION INSTRUCTION MANUAL
    Electric Parking Brake PARTS LIST/INSTALLATION INSTRUCTION MANUAL 3 7 Daniel Road West, Fairfield, NJ 07004 E-mail: [email protected] Phone: (973) 808-9709 Fax: (973) 808-9713 Web: www.drive-master.com NSEPB 001/11 Mobility Dealer and Installing Tech Thank you for the purchase of this product. Please familiarize yourself with these instructions, they have changed to reflect the redesigned product and wiring for all vehicles. Before starting the installation of the Drive- Master Electric Park Brake check to make sure the OEM indicator light works when engaging the OEM emergency brake pedal. As you will be modifying the OEM emergency brake assembly you will also need to confirm that when the emergency brake is engaged it will not allow the vehicle to roll while in gear with the engine running. If the vehicle has any problems related to the use of the OEM emergency brake they should be repaired before attempting the installation. Please read through the installation instructions before attempting the installation. Any questions that arise during installation please call for technical assistance (973) 808-9709 Monday-Friday 8:00 AM-4:30 PM EST. If you follow step by step as instructed, you will not encounter diffi- culties and will have a proper installation. Thank you for supporting Drive-Master Products. Yours in mobility, President 2 3 If your OEM dash brake light indicator stays on after the Park Brake is released and the D.M. Park Brake has been checked over for proper installation and wiring, you will need to have your brake system inspected by an authorized OEM dealer.
    [Show full text]
  • Parking Brake Pb
    PARKING BRAKE PB Page 1. General Description ....................................................................................2 2. Parking Brake Lever....................................................................................6 3. Parking Brake Cable ...................................................................................7 4. Parking Brake Assembly (Rear Disc Brake) ...............................................8 5. General Diagnostic Table..........................................................................11 GENERAL DESCRIPTION PARKING BRAKE 1. General Description A: SPECIFICATIONS Model Rear drum brake Rear disc brake Type Mechanical on rear brakes, drum in disc Effective drum diameter mm (in) 228.6 (9) 170 (6.69) Lining dimensions 219.4 × 35.0 × 4.1 163.1 × 30.0 × 3.2 mm (in) (length × width × thickness) (8.64 × 1.378 × 0.161) (6.42 × 1.181 × 0.126) Clearance adjustment Automatic adjustment Manual adjustment Lever stroke notches/N (kgf, lb) 7 to 8/196 (20, 44) PB-2 GENERAL DESCRIPTION PARKING BRAKE B: COMPONENT 1. PARKING BRAKE (REAR DISC BRAKE) PB-00001 (1) Back plate (8) Strut (15) Shoe hold-down spring (2) Retainer (9) Shoe guide plate (16) Shoe hold-down pin (3) Spring washer (10) Primary return spring (17) Adjusting hole cover (4) Lever (11) Secondary return spring (5) Parking brake shoe (Primary) (12) Adjusting spring Tightening torque: N·m (kgf-m, ft-lb) (6) Parking brake shoe (Secondary) (13) Adjuster T: 53 (5.4, 39.1) (7) Strut spring (14) Shoe hold-down cup PB-3 GENERAL DESCRIPTION PARKING BRAKE 2. PARKING BRAKE CABLE PB-00002 (1) Parking brake lever (7) Clamp Tightening torque: N·m (kgf-m, ft-lb) (2) Parking brake switch (8) Parking brake cable RH T1: 5.9 (0.6, 4.3) (3) Lock nut (9) Cable guide T2: 18 (1.8, 13.0) (4) Adjusting nut (10) Clamp (Rear disc brake model T3: 32 (3.3, 23.6) (5) Equalizer only) (6) Bracket (11) Parking brake cable LH PB-4 GENERAL DESCRIPTION PARKING BRAKE C: CAUTION • Wear working clothing, including a cap, protec- tive goggles, and protective shoes during opera- tion.
    [Show full text]
  • Electric Parking Brake Apply the Electric Parking Brake As You're Getting Ready to Step out of the Vehicle Once Your Drive Is
    DRIVING Electric Parking Brake Apply the electric parking brake as you’re getting ready to step out of the vehicle once your drive is complete. To apply: Pull up the switch. The BRAKE indicator appears in the instrument panel. Hold the switch up for emergency braking while the vehicle is moving. To release: Press the brake pedal and make sure Pull up to apply. your seat belt is fastened. Press the switch down to release. Or, release by lightly pressing the accelerator pedal (and release the clutch pedal for manual transmission) while the vehicle is in gear. Press down to release. DRIVING Automatic Brake Hold Use brake hold to make stop-and-go driving easier. It maintains rear brake hold even after the brake pedal is released. Make sure the vehicle is on and your seat belt is fastened when operating this feature. 1. Press the BRAKE HOLD button, to the left of the shift lever. The BRAKE HOLD indicator appears in the instrument panel. 2. With the shift lever in Drive (D) or Neutral (N), press the brake pedal and come to a complete stop. The HOLD indicator appears, and brake hold is applied. Release the brake pedal. Press the accelerator pedal (or shift into a gear and release the clutch pedal for manual transmission) to cancel brake hold and start moving. To turn off brake hold: Press the brake pedal and press the BRAKE HOLD button again. Automatic brake hold cancels • The foot brake is pressed and the shift when: lever is moved to P or R. • Braking is applied for more than • The engine stalls (manual 10 minutes.
    [Show full text]
  • 2019 RAM Commercial Promaster Owner's Manual
    2019 PROMASTER OWNER’S MANUAL VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name features and equipment that are either standard or op- FCA US LLC shall be deemed to be deleted and the name tional on this vehicle. This manual may also include a FCA Canada Inc. used in substitution therefore. description of features and equipment that are no longer DRIVING AND ALCOHOL available or were not ordered on this vehicle. Please Drunken driving is one of the most frequent causes of disregard any features and equipment described in this accidents. manual that are not on this vehicle. Your driving ability can be seriously impaired with blood FCA US LLC reserves the right to make changes in design alcohol levels far below the legal minimum. If you are and specifications, and/or make additions to or improve- drinking, don’t drive. Ride with a designated non- ments to its products without imposing any obligation drinking driver, call a cab, a friend, or use public trans- upon itself to install them on products previously manu- portation. factured. WARNING! Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive. Copyright © 2018 FCA US LLC SECTION TABLE OF CONTENTS PAGE 1 1 INTRODUCTION ...................................................................3 2 2 GRAPHICAL TABLE OF CONTENTS ......................................................7
    [Show full text]
  • Parking Brakes for Passenger Locomotives and Cars
    APTA STANDARDS DEVELOPMENT PROGRAM APTA PR-M-S-006-98, Rev. 3 STANDARD First Published: March 4, 1999 American Public Transportation Association First Revision: February 13, 2004 1300 I Street, NW, Suite 1200 East, Washington, DC 20006 Second Revision: June 2, 2007 Third Revision: June 1, 2017 PRESS Mechanical Working Group Parking Brakes for Passenger Locomotives and Cars Abstract: This document provides standards for parking brake systems for passenger locomotives and passenger cars. Keywords: grade holding, handbrake Summary: Design standards for parking brake systems for passenger locomotives and cars for the passenger railroad industry are provided. Scope and purpose: This standard applies to North American passenger locomotive and car parking brake systems and is intended to promote safe, efficient and reliable operation. This standard recognizes the existence of service proven equipment that may not meet all provisions of this standard, primarily in areas of required brake actuating force and design safety factors. In these cases, the existing requirements are accepted and indicated accordingly; however, it is intended that all new designs shall meet the updated requirements. Specific areas addressed are grade-holding requirements; prevention of equipment damage; and human interface for parking brake operation, as well as annunciation, manual release provisions, validation and related safety issues. This document represents a common viewpoint of those parties concerned with its provisions, namely operating/ planning agencies, manufacturers, consultants, engineers and general interest groups. The application of any standards, recommended practices or guidelines contained herein is voluntary. In some cases, federal and/or state regulations govern portions of a transit system’s operations. In those cases, the government regulations take precedence over this standard.
    [Show full text]
  • Section 11 Vehicle Inspection Test
    Commercial Driver’s License Manual – 2005 CDL Testing System Section 11 Power steering belt. Vehicle Inspection Test Water pump belt. Alternator belt. Air compressor belt. This Section Covers Note: If any of the components listed above are x Internal Inspection not belt driven, you must: x External Inspection Tell the examiner which component(s) are not belt driven. During the Vehicle inspection, you must show that Make sure component(s) are operating properly, the vehicle is safe to drive. You will have to walk are not damaged or leaking, and are mounted around the vehicle and point to or touch each item securely. and explain to the examiner what you are checking and why. You will NOT have to crawl under the hood Safe Start or under the vehicle. Depress clutch. 11.1 All Vehicles Place gearshift lever in neutral (or park, for automatic transmissions). Study the following vehicle parts for the type of vehicle you will be using during the CDL skills tests. Start engine, then release clutch slowly. You should be able to identify each part and tell the examiner what you are looking for or inspecting. 11.1.2 – Cab Check/Engine Start 11.1.1 Engine Compartment (Engine Off) Oil Pressure Gauge Leaks/Hoses Make sure oil pressure gauge is working. Look for puddles on the ground. Check that pressure gauge shows increasing or normal oil pressure or that the warning light goes Look for dripping fluids on underside of engine and off. transmission. If equipped, oil temperature gauge should begin a Inspect hoses for condition and leaks.
    [Show full text]
  • Brake Failure Loss of Hydraulic Pressure: Find an Escape Route
    Brake Failure Brakes kept in good condition rarely fail. Most hydraulic brake failures occur for one of two reasons: loss of hydraulic pressure or brake fade on long hills. Loss of Hydraulic Pressure: When the system will not build up pressure, the brake pedal will feel spongy or go to the floor. Following are things you can do: o Downshift - Putting the vehicle into a lower gear will help to slow the vehicle. o Pump the brakes - Sometimes pumping the brake pedal will generate enough hydraulic pressure to stop the vehicle. o Use the parking brake - The parking or emergency brake is separate from the hydraulic brake system. Therefore, it can be used to slow the vehicle. However, be sure to press the release button or pull the release lever at the same time you use the emergency brake so you can adjust the brake pressure and keep the wheels from locking up. Find an Escape Route: While slowing the vehicle, look for an escape route - an open field, side street or escape ramp. Turning uphill is a good way to slow and stop the vehicle. Make sure the vehicle does not start rolling backward after you stop. Put it in low gear, apply the parking brake and, if necessary, roll back into some obstacle that will stop the vehicle. Brake Failure on Downgrades: Going slow enough and braking properly will almost always prevent brake failure on long downgrades. Once the brakes have failed, however, look outside your vehicle for something to stop it. Your best hope is an escape ramp .
    [Show full text]
  • Drive-By-Wire Development Process Based on ROS for an Autonomous Electric Vehicle
    sensors Article Drive-By-Wire Development Process Based on ROS for an Autonomous Electric Vehicle J. Felipe Arango, Luis M. Bergasa * , Pedro A. Revenga , Rafael Barea , Elena López-Guillén , Carlos Gómez-Huélamo, Javier Araluce and Rodrigo Gutiérrez Electronics Department, University of Alcalá, Campus Universitario, 28805 Alcalá de Henares, Spain; [email protected] (J.F.A.); [email protected] (P.A.R.); [email protected] (R.B.); [email protected] (E.L.-G); [email protected] (C.G.-H.); [email protected] (J.A.); [email protected] (R.G.) * Correspondence: [email protected]; Tel.: +34-91-885-6569 Received: 9 September 2020; Accepted: 26 October 2020; Published: 27 October 2020 Abstract: This paper presents the development process of a robust and ROS-based Drive-By-Wire system designed for an autonomous electric vehicle from scratch over an open source chassis. A revision of the vehicle characteristics and the different modules of our navigation architecture is carried out to put in context our Drive-by-Wire system. The system is composed of a Steer-By-Wire module and a Throttle-By-Wire module that allow driving the vehicle by using some commands of lineal speed and curvature, which are sent through a local network from the control unit of the vehicle. Additionally, a Manual/Automatic switching system has been implemented, which allows the driver to activate the autonomous driving and safely taking control of the vehicle at any time. Finally, some validation tests were performed for our Drive-By-Wire system, as a part of our whole autonomous navigation architecture, showing the good working of our proposal.
    [Show full text]
  • Five Major Components of Fire Apparatus
    Five Major Components of Fire Apparatus Apparatus Division Montgomery County Fire Rescue Services FF Jeff Bennett FF Donnie Allen Class “B” Driver Course Session 1-3 Engine & Transmission Class “B” Driver Course Session 1-3 Frame Cross members Frame rails Class “B” Driver Course Session 1-3 Cab and Body Mounts Body mounts are used to secure the body to the frame. There are a few types in Body Frame use The rubber cushioned has a Body Mount center bolt. And rubber bushings sandwiched between The U-bolt type slips over the body fame and is bolted Chassis Frame to the bottom of the chassis frame Class “B” Driver Course Session 1-3 Body U - Bolts U – bolts hold the body to frame. The bolts are Body frame usually covered by a plastic sleeve. Chassis frame The following conditions warrant a OOS : A broken u – bolt Plate Any missing locking nuts U - Bolt A Loose u – bolt that allows sliding on the frame Locking nuts A cracked or broken plate between u – bolt. Class “B” Driver Course Session 1-3 Five Major Components Tires and wheels Steering Suspension Brakes Class “B” Driver Course Session 1-3 Why do we have to know the five major components ? Knowing the five major components of the Apparatus we can identify and correctly write defect reports. Knowing the five major components and there working components helps determine normal and out of service conditions. Knowing all of the components by name help the mechanic understand what we are reporting. Class “B” Driver Course Session 1-3 Tire’s Class “B” Driver Course Session 1-3 Tire’s Does the tire have sufficient tread ? At least 4/32” inch of tread on steering axle’s and 2/32” tread on non steering axles Are there cuts in the tread or sidewall that expose the cord of the tire ? If so the tire is out of service.
    [Show full text]