CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 214
PARTICULAR SPECIFICATIONS (CONTD..)
ANNEXURE - ‘I’ ITEMS MANDATORILY BEARING BIS CERTIFICATIONMARK AND AS PER BRAND APPROVED BY GE AFTER SATISFACTION ON QUALITY OF MATERIAL AND OTHER CHECKS Srl Materials IS No Remarks No 1 2 3 4 1. Earthwork (1) Chemical for ATT( chloropyriphos)(20% EC) IS-8944
2. Concrete:- (a) Ordinary Portland Cement Grade – 43 IS 8112 Make as per Appendix `B’ (b) Ordinary Portland Cement Grade – 53 IS 12269 -do-
(c) Portland Pozzolona Cement IS 1489 -do-
(d) Integral cement water proofing compound IS 2645
3. Joinery Work :- (1) Wooden flush door shutters, Solid core type) IS 2202 (Part-I) (2) Plywood for general purpose IS-303 (3) Veneered particle Board IS-3097 (4) Prelaminated particle board IS-12823 (5) Wooden Particle board (Medium density) IS- 3087 (6) Marine ply wood IS-710
4. Builders Hardware (1) Steel Butt Hinges IS-1341 (2) Ferrous Tower bolts IS-204 Part-I (3) Non Ferrous Tower bolts IS-204 Part-II (4) Door Handles IS-208 (5) Hasp & Staples IS-363 (6) Continuous Piano Hinges IS-3818 (7) Non-ferrous metal sliding door Bolts IS-2681 (Aldrops) (8) Rebated Mortice Locks (Vertical) IS 6607 (9) Mild Steel Sliding Door Bolts (Except 19 mm IS-281 dia sheet bolt (10) Wire cloth for general purposes IS-1568
5. Steel and Iron Work :- (1) Steel for general structural purpose Gde IS-2062 Make as per Fe-410 WA Appendix `B’. (2) Low tensile structural steel Gde Fe- 290 IS –2062 -Ditto- (3) Reinforcement Deformed TMT steel bar IS- 1786 -Ditto- (4) Galvanised Iron sheets (Plain and IS- 277 -Ditto- Corrugated) (5) Galvanised steel barbed wire IS- 278 (6) Specification for hard drawn wire fabric for IS-1566 reinforcement (7) Galvanised steel wire chain link fences IS- 2721 (8) Metal Rolling shutters / rolling grills IS- 6248
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 215
PARTICULAR SPECIFICATIONS (CONTD..)
ANNEXURE - ‘I’ (Contd..)
MATERIALS BEARING BIS CERTIFICATION MARK AND AS PER BRAND APPROVED BY GE AFTER SATISFACTION ON QUALITY OF MATERIAL AND OTHER CHECKS
1 2 3 4
6. Roof Covering: -
(1) Industrial Bitumen IS-702
7. Flooring :- (1) Bitumen mastic for flooring IS-1195 (2) White Portland cement IS-8042 (3) PVC asbestos floor tiles IS-3461 (4) Flexible PVC floor tiles IS-3462 (5) Ceramic unglazed vitreous acid resist tiles IS-4457 (6) Cement concrete flooring tiles IS-1237 (7) Chequered cement concrete tiles IS-13801 (8) Interlocking PCC block IS-15658 8 GLAZING :-
(1) Putty for use on window frames IS-419
9 PAINTING :- (1) Linseed oil, raw and refined IS-75 (2) French polish IS- 348
10 Water supply, Plumbing, Drains and sanitary Appliances :- (1) Concrete pipes with or without Reinforcement IS-458 (2) Salt Glazed stoneware pipes and fittings IS-651 (3) Centrifugally cast (Spun) iron spigot and socket IS-3989 soil, waste and ventilating fittings (4) PVC, soil, waste and rain water pipes IS-4895 (5) Mild steel tubes, tubulars IS-1239 Part-I (6) Mild steel tubulars and other wrought steel pipe IS-1239 Part-II fittings (7) GI fittings for GI pipes IS-1626 Part-II
(8) Flushing cisterns for water closets and urinals IS-774 (9) Ball valves (Horizontal plunger type) including IS-1703 floats for water supply purposes (10) Cast copper alloy, screw down bid taps and stop IS-781 valves for water services for 15 mm & 20 mm (11) Self closing taps IS-1711 (12) Nahani / trap / floor trap IS-3989 (13) Pillar taps for water supply IS-1795 (14) Cast iron manholes covers and frames IS-1726 Part-I to VII (15) Cast copper alloy fancy pillar taps for water IS-8934 services (16) Cast copper alloy fancy bib taps & stop valves IS-5931
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 216
PARTICULAR SPECIFICATIONS (CONTD..)
ANNEXURE - ‘I’ (Contd..)
MATERIALS BEARING BIS CERTIFICATION MARK AND AS PER BRAND APPROVED BY GE AFTER SATISFACTION ON QUALITY OF MATERIAL AND OTHER CHECKS
1 2 3 4
11 Electrical Works :- (1) Ceiling rose IS-371 (2) Tumbler Switches IS-3854 (3) Socket outlet-3 pin plug and socket IS-1293 (4) Switch fuses (Main & Switch) IS-4064 (5) Rigid Non-Metallic conduit IS-2509 (6) Aluminium stranded conductor IS-298 (7) New insulating oil for transformer & switch gear IS-335 (8) Conductor and earth wire accessories IS-2121 (Part-I & II) (9) Galvanised stay strand IS-2141 (10) Danger notice plates IS-2551 (11) Fittings for rigid steel conduits for electrical wiring IS-2667 (12) Fitting for rigid non-metallic conduits IS-3419
(13) Water light electric fittings IS-3553 (14) Precast concrete cable cover IS-5820 (15) Rigid steel conduit with amendment No 1 IS-9537 (Part-III)
13 Pavement work (1) Hot applied sealing compound for joints in IS-1834 concrete (2) Preformed filler for expansion IS-1838
(3) Bitumen IS-73
NOTE :- A photo copy of proof in support of firms valid certification license of BIS mark shall be produced by the contractor to GE along with sample of material.
SIGNATURE OF CONTRACTOR DY DIRECTOR (CONTRACTS) FOR ACCEPTING OFFICER
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 217
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 1. CEMENT OPC AND PPC M/s Cement Manufacturing Company Ltd, Guwhati- 781005 M/s OCL India Ltd , Orissa, Pin 770017 M/s Dalmia Cement (Bharat) Ltd ,Tamil Nadu 621651 M/s Chettinad Cement Corporation Ltd ,Chennai 600006 M/s Heidelberg Cement India Ltd, Haryana 122002 (PPC only) M/s Parasakti Cements Ltd, Hyderabad 500038 M/s Zuari Cement Ltd ,Chennai 600031 M/s Toshali Cements Pvt Ltd ,Hyderabad 500038 M/s Saifco Cement Pvt Ltd, Srinagar 190004 (J&K), (OPC only ) M/s Prism Cement Ltd, Lucknow 226010 M/s Shree Guru Kripa Cement Pvt Ltd, Jammu M/s Barak Valley Cements Ltd, Assam 788803, (OPC only) M/s Dhruv Industrial Company Ltd, Kanpur 208001, (OPC only) Ultra Tech Cement , Mumbai 400093 Madras Cement, Chennai 600004 Saurashtra Cement, Mumbai 400093 Lafarge Cement (Lafarge India Pvt Ltd), Mumbai 400051 The Associated Cement Companies Ltd ,New Delhi 110044 Grasim Industries Ltd, Madhya Pradesh, Pin 456331 The India Cement , Chennai 600002 Andhra Cement Ltd, Andhra Pradesh, Pin 522414 Century Cement , Mumbai 400020 Binani Cement Ltd, Mumbai 400001 Mangalam Cement Ltd, Kota, Rajasthan 326520 Birla Corporation Ltd, Kolkata 700001 Orient Cement, Hyderabad 500063 Shree Cement, Ajmer, Rajasthan 305901 J K Cement J K Lakshmi Cement Ltd, Dist Sirohi, Rajasthan Jaypee Rewa Cement Ambuja Cement Ltd, Junagadh, Gujarat 362715 M/s Shree Digvijay Cement India Ltd , Ahmedabad 380006 (for Gujarat Area only) M/s Home Indistries Ltd.(Hyderabad) M/s Saifco cement Pvt Ltd. M/s Lafargecement
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 218
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 2. STEEL AND IRON WORK (A) Main Producers For Tmt SAIL, TISCO, RINL, Steel For Reinforcement (i) Primary producers for TMT (i) M/s Jai Balaji Industries Ltd New Delhi - 110001 steel reinforcement (ii) M/s SPS Steel Rolling Mills Ltd, Kolkatta- 700019 (iii) M/s Shyam Steel Industries Ltd, Kolkata – 700 091. (iv) M/s SRMB SRIJAN LIMITED, Kolkata-7000012 (v) M/s Steel Exchange India Ltd, Hydrabad- 500016 (AP) (vi) M/s Electrosteel Steels Ltd, Bokaro, Jharkhand. WB- 700017 (vii) M/s JSW Steel Ltd, Karnataka. (viii) M/s Adhunik Metaliks Ltd, Orissa. (ix) M/s Shri Bajrang Power & Ispat Ltd, Raipur,Chhatisgarh. (x) M/s Concast steel & power Ltd,Kolkata-700001 (xi) Jindal Steels And Power Ltd, Haryana (xii) M/s Gallant Tmx (xiii) Or any other make approved by E-in-C’s Branch as on date of receipt of tender. (B) Secondary Producers Of K L Steel Pvt Ltc, Ghaziabad (Up) Steel (Other Than Tmt Steel Kamdhenu Ispat Ltd, For Reinforcement) Bhiwadi, Dist-Alwar (Raj), Barnala Steel Industries Ltd, Muzaffarnagar (Up), Amba Shkti Ispat Ltd, Kala Amb, Dist-Sirmor (Hp) Tata Steel Ltd, Tube Division, 5 Sansad Marg, New Delhi Madhav Udyog Pvt Ltd, Mandi Gobindgarh Rathi Super Steel Ltd, 11 Tolstoy Marg, New Delhi Kashi Viswanath Steel Ltd, Kashipur, Dist-Udham Singh Nagar (Uttaranchal)
(C) Structural Steel(Angle, SAIL, TISCO, RINL, JINDAL STEELS AND POWER Beam, Column Channel & LTD, HARYANA Plates)
(D) Pressed Steel Door M/S Shiv Mular, 309, Gidc, B-Road, Phase-I, Naroda, Frames & Steel Windows Ahmedabad. Pressed Steel Frames And Ashwini And Sons, Ghaziabad Shutter For Cup Board / Jangid Engineering Works, Jaipur Wardrobe & Steel Lockers Madhu Industries, Bangalore Agew Manufacturing Pvt Ltd, Ahmedabad M/S Sk Fabrication,Bathinda Mohata Engg And Constn Co, Bikaner-334002 M/S Steelmans Industries, Old Adda Kapurthala, Jalandhar M/S Sen-Harvic Mumbai M/S Godrej Boyce Steel Mfg Mumbai M/S Raymus Structurals And Engineering, New Delhi M/S Bihar Bobbin & Engg Work, Katihar M/S Pd Industries M/S Sks Steel Industries M/S Trisul Industries M/S Ashwini & Sons
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 219
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
(E) BOX TYPE MILD STEEL M/S Shree Krishna Associated ,304 Industrial Area, WINDOW (OTHER THAN ‘Z’ Phase-Ii, Panchkula 134109 SECTION) M/S Steelmans Industries, Old Adda Kapurthala, Jalandhar
M/S Friends Manufacturing Co Of Kotkapura
M/S S K Fabrication (India) St No 2, Joga Nagar, Mansa Road Bathinda Phone – 9888498000
Ambika Steel Industries , Ahmedabad
Chandan Metal Products (P) Ltd., Vadodara M/S Evershine Mechanical Works, B 18 Industrial Area Near Iti Chowk Bathinda (PB) (F) ALUMINIUM ANODISED Hindalco SECTIONS FOR FABRICATIONS FOR Indal (Indian Al Coy) FABRICATION OF ALUMINIUM WINDOWS / Jindal DOORS / VENTILATERS Associated Profile & Aluminium Ltd Ajit India
Nalco
Sterlite
3. JOINERY FACTORY MADE M/S A1 Teak Products, Indore PANELED / GLAZED / GAUGED / SHUTTERS M/S Mp Wood Products, Indore
M/S Pioneer Timber Product, 22, Madhya Marg, Sector-70, Chandigarh
M/S Sarab Enterprises Campbell Road Pathankot
M/S Rajendera Industries, B-38 Industrial Area, Phase-Iii, Sas Nagar Mohali, Distt: Ropar.
Goyal Industries, 162 Industrial Area, Chandigarh Chandigarh Timber Products, 29/30 Sector 22 C Chandigarh
M/S Shakti Enterprise,Dhanula,Goyala Industries, Faridabad,Sohal Industries, Chandigarh Doorking Kolkata
M/S SK Fabrication (India),Jain Wood Industries, Prince Timbers (Prince) (Ce (Af) Gz)
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 220
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 4. COMPOSITE / FRP / PVC / M/S Rajshri Plastic Wood Ltd, 10/1, South Tukoganj, PVC DOOR FRAME, DOOR Kanchan Bagh, Indore SHUTTERS AND WINDOW M/S Sintex Industries Ltd SHUTTERS M/S Accucell M/S Dura Plast Extrusion Durian Doors H2o Solution B-201 , Okla Industrial Ph-I New Delhi Kumar Arch Tech Pvt Ltd M/S Engco Industries, Jodhpur Epp Composite Pvt Ltd Selected Products Co. (Spc) M/S Engco Industries Jodhpur Selected Products Co
5. CGI SHEETS Tata Rastriya Ispat Sail Jindal Indian Steel Corporation (Ultratuff)
6. ROOF COVERING Everest AC SHEETS, BUILDING Charminar BOARDS, PIPES AND Swastik FITTING Ramco
7. FLOORING Johnson (A) GLAZED TILES, Somany CERAMIC TILES, WEAR Nitco RESISTANCE TILES (NON Kajaria Ceramics Ltd, J-1/B-1-1(Extn), Mohan Co- SKID TILES) Operative Industrial Estate, Mathura Road, New Delhi Orientbell Ltd. Asian Granito India Ltd. (F)L) Bell Ceramics M/ S Crystal Ceramic Industries Pvt Ltd Varmora Granito Pvt Ltd Sparktak Regency Swastik Ceracon Ltd (Swastik/Gabon) (B) VITRIFIED TILES Murudeshwar Ceramics Asian Granito Bell Granito Orientbell Limited Euro Tiles M/ S Crystal Ceramic Industries Pvt Ltd M/S Swastik Ceracon Ltd, Ahmedabad Johnsons Somany Kajaria Asian Granito India Ltd (Agl)
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 221
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (C) METALIC FLOOR Ironite HARDNER Hardonite
(D) PVC TILE/SHEET Krishna Vinyl Tiles Armstrong M/S Marblex Tiles Polyfin Tiles Square Foot Premier Vinyl, Rikvin Floor Ltd., New Delhi-49, Fixopen Machineries Pvt Ltd., New Delhi Tesa Asian Granito Neelkamal
(E) CEMENT CONCRETE Mehtab Tiles , Indore INTERLOCKING PAVER M/S Ultra Tiles BLOCKS / TILES, PRE Nitco GLAZED TILES Topaz Tiles Navya Tiles, Jodhpur Chopdar S-Bess Toj Cement Product Swasthik Sap Pavers, Jodhpur Sagar Tiles, Saharanpur Premier Bars Pvt Ltd , Unit-Ii,402, Nidhikamal Tower Jaipur Premier Bars Pvt Ltd,Jaipur (Unit-Ii) (Pavcon) Sukhi Enterprise (Sukhi) Supreme Tiles (Supreme) Ce (Af) Gz Swarn India Tiles Company (Sitco) (CE BZ)
8. DISTEMPERING AND Nerolac PAINTING Shalimar Paints (A) SYNTHETIC ENAMEL Jenson & Nicholson PAINT / FIRE RESISTANT Asian Paints PAINT (FIRST GRADE ONLY) Berger Paints Ici India Garware Jotun India Pvt Ltd Godavri Paints Pvt Ltd
(B) DISTEMPERS, ACRYLIC Nerolac WASHABLE DISTEMPER Shalimar Paints (LIGHT SHADE) Jenson & Nicholson Asian Paints Berger Paints Ici India Garware Jotun India Pvt Ltd Godavri Paints Pvt Ltd
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 222
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (C) CEMENT BASED PAINT Nerolac Shalimar Paints Jenson & Nicholson Asian Paints Berger Paints Ici India Garware Jotun India Pvt Ltd Godavri Paints Pvt Ltd
(D) PLASTIC EMULSION Nerolac PAINT / ACRYLIC EMULSION Shalimar Paints Jenson & Nicholson Asian Paints Berger Paints Ici India Garware Jotun India Pvt Ltd Godavri Paints Pvt Ltd
9. WATER SUPPLY, PLUMBING, Jaquar (Clarion) & Co Ltd DRAINS AND SANITARY Parryware Roca Pvt Ltd APPLIANCES Kohler (A) BATH ROOM FITTINGS, Aluminium Udyog Under Brand Name "Kunchal" CHROMTUM PLATED CAST Hindware COPPER ALLOY FANCY Prayag Polymer Pvt Ltd TYPE BIB TAPS, STOP Marc VALVES AND PILLAR TAPS Aluminium Udyog Jaquar & Company Pvt Ltd Plastocraft Sanitary India Pvt Ltd Shakti Seico Essess Kingston Status Sanitech(P)Ltd Dhawan Sanitary Udyog (Prima) M/S Status Sanitechpvt Ltd
(B) STAINLESS STELL Diamond SINKS, PLATE RACK & Nirali DRAINING BOARDS Prayag (KITCHEN SINK) (MADE OF Anupam Industries(Blue Star) SALEM STEEL & IS Jayna MARKED) Parryware Neelkant Phoenix Jain Brothers Sanitation Pvt Ltd Prayag Polymer Pvt Ltd Anupam Industries Jain Brothers Sanitation Pvt Ltd Plastocraft Sanitary India Pvt Ltd (Kingston/Cobra) Bluestar Sanitary Industries Pvt Ltd (Silvershine)
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 223
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (C) SANITARY WARE Hindustan Sanitary Ware And Industries Ltd (FIRST/ STANDARD Parry Ware (Eld) (India) Ltd QUALITY ONLY) Cera (Madhusudhan Ceramic) Johnson Hindware
(D) PVC LOW LEVEL LTR Cera DUAL FLUSHING CISTERN Hindware OR 10 LTRS FLUSHING Parryware (Eid)(India) Ltd CISTERN Prayag Neyveli Ceramics (Neycer) Johnson H & R India Ltd Commander Slim Line Phenoweld Polymer Pvt Hindustan Sanitary Ware And Industries Ltd Kingston Shakti Enterprises(Shakti) Precision Products(Pearl) Rs Industries(Polytuf)
(E) MIRROR, CLEAR Modi GLASS/ GLASS PANES Atul Kohinoor Swastik Saint Gobain Gold Fish Hindustan Glass Kolkata Asahi Mayur Somany Ceramics Limited (Somany) Rs Indudtries (Polytuf)
(F) GATE VALVES/ NON Leader RETURN VALVES Kirloskar Upadhya L & T Venus Zoloto
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 224
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
(G) GALVANISED IRON Tata STEEL TUBING Jindal Zenith Swastik Prakash Surya Indian Tube Coy
(H) GI FITTINGS Tata Jindal Zenith Swastik Prakash Surya Indian Tube Coy Dhawan Sanitary Udyog Brand Prima
(J) Ductile Iron PIPES & Jindal Ltd, Gujrat FITTINGS Electrosteel (India) Ltd, W.B. Tata Metalinks, Kolkata Lanco, Andra Pradesh Electrotherm (India) Ltd, Gujrat Saw Pipes Kubota Pipes Ltd Rashmi Metaliks Ltd
(K) MS PIPES & FITTINGS Tata Jindal Zenith Bst Prakash Surya Swastik (L) HDPE / PVC/ UPVC RAIN Finolex WATER PIPE IS MARKED Prince Kisan Supreme Sfmc Sintex Jain Irrigation Sys Reliance Icdustries Tirupati (M) AC PIPES Charminar Everest
(N) BIB COCK/ STOP VALVE Jaquar (BRASS) Somany Kingstone Parryware Sieco Ess Ess Marc
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 225
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (O) HDPE TANKS (IS Sintex MARKED) Polycon,Jaipur Rotex Infra Ashish Plast Ganga Kaveri Js Polylast Ergen Plastic Indusrties, Jodhpur Mehagi Polymers (Brand Polyster) (P) CENTRIFUGALLY CAST Elecro-Steel CI PIPES (IS-3989) FOR SOIL Kejriwal WASTE PIPES & FITTING Neco (SPUN PIPE) Skf Kesoram Kapilansh Kalinga Zoloto Bic Anand Founder & Engineers Dhatu Udyog
(Q) PVC PIPE Finolex Prince Kisan Supreme Sfmc Sintex Jain Irrigation Sys Reliance Industries
10. PLY WOOD, BLOCK BOARD, PARTICLE BOARD
(A) PLY WOOD/ BLOCK Kitply BOARD (PHENOL BONDED Century Plywood ONLY TO BE USED) Mysore Chip Board, Mysore Sharada Ply Wood National Ply Wood Mumbai Bhutan Bd Swastik Anchor (B)PARTICLE BOARD/ Mangalam Timber Product VENEERED PARTICLE Gypsum Board BOARD PHENOL BONDED Jolly Bd, Mumbai ONLY TO BE USED Indian Gypsum Product Armstrong World Industries Aerolite Ceiling System Boral Gypsum India
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 226
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (C) PRE LAMINATED Novapan PARTICLE BOARD/MDF/HDF Eco Board Industries Pune BOARD Kitply Anchorlam M/S Bhutan Bd Century Plywood Associate Décor Ltd Balaji Action Buildwell (D) LAMINATED SHEETS Formica Sun Gloss Sunmica Backyte Hylam Eco Board Century Dura Merino Green Lam Associate Décor Ltd MISC ITEMS (A) CONCRETE ADDITIVES Stp 11. Fosroc (B)ALUMINIUM MONGERY Pidilite (IS MARKED) Crown Aluminium Udyog Under Brand Name “Global” Aluminium Udyog Jindal Alutrac (C) WATER PROOFING Dorma India Pvt Ltd COMPOUND Pidilite Stp Fosroc Acc (D)LOCKS L & T
Godrej Harrison Links Johnson
(E) IRON MONGERY (IS Oxford MARKED) Crown Hettich Prajapat Kerala Tile Wks, Thrissur
(F) TOUGHENED GLASS Hindustan Pilkingston Glass Works Saint Gobin Modi Float Modiguard Atul Glass Industries Gold Fish Asahi Trupti
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 227
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (G)FALSE CEILING BOARD Gypsum India Ltd & GRID SYSTEM Armstrong Bison Aerolite M/S Everest Industries Ltd
(H)WOODEN FLUSH DOOR Doorking Kolkata M/S Kit Ply Indusries Ltd (Kitply) M/S Century Ply Wood Ltd (Century) M P Woods,Indore A-1 Teak Product Pvt Ltd, Indore Ashish Enterprise (Ashish) Jain Door Pvtltd Doorking Kolkata
(J) RESSIN BONDED GLASS 1. Bgp 2. Glass Insulatory WOOL
(K) PLASTIC SEAT AND Cera COVER FOR WC Hindware Parryware Prayag Neyveli Ceramics (Neycer) Johnson R S Industries (Polytuf) Precision Products (Pearl)
(L) BITUMEN Hindustan Petroleum Indian Oil Corporation Bharat Petroleum
(M) PVC HAND RAIL Fixopen Caliplast
(N) HYDRAULIC DOOR Hardwin CLOSER/ FLOOR SPRING Ranjan Kelin Universal Prabhat Door King Perfect Hydraulic
(O) WALL CARE PUTTY 1. Birla Wall Care Putty 2. Shalimar 3. Berger 4. Acro Wall Guard
(P) PREMOULDED JOINT 1. Tiktar Industries Ltd 2. Stp Ltd FILLER Capital Steel & Chemical M/S Garlick & Co Pvt Ltd
(Q) FLOAT VALVE 1. Bombay Metal 2. Pery Ware 3. Bombay Super Flow 4. Hindware 5. Prima 6. Commander 7. Dhawan Sanitary Udyog(Prima)
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 228
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘A’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 (R) SGSW PIPES Perfect Jabalpur Devraj Ind Gaziabad Buran Rk Gupta Refractary Gwalior. Rajashthan Pipe Industries, Bikaner Basant Industries Bikaner Pal Industries, Rani Bazar Bikaner (S) POLYMERIC WATER (i) M/S Texsa India Ltd, A-4/8, Ist Floor, Dlf City Phase- PROOFING MEMBERANE I, Gurgaon-122 002(Moply Fp).
(ii) M/S Tikitar Danosa(India) Pvtltd (iii) M/S Pidilite Industries Limited, Construction Chemicals Division Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai-400059 (India). (iv) M/S Bengal Bitumen. (v) M/S Torchtar Membranes & Bitumen Products Pvt Ltd. (vi) M/S Modrenbitumodepvt Ltd (vii) M/s IWL India Ltd. (viii) M/S STP Limited, 570, Udyog Vihar, Phase V, GURGAON-122 016 (SUPER THERMOLAY). (ix) M/s A R Industries
(T) PVC RAIN WATER PIPE/ 1. Finolex 6. Sintex SEWAGE PIPES 2. Prince 7. Reliance Industries 3. Kisan 8. Jain Irrigation Sys 4. Supreme 9. Tirupati 5. Sfmc (U) OIL PUTTY Gold Mohar Shalimar Hardware M/S Atul Dyes And Chemicals Uk Paint Industries, Gurgaon Berger Jenson & Nicholson M/S Anglo Dutch Colour & Varnish Wks, Najafgarh Rd M/S Bhagsson Paint Industries, Najafgarh Rd
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 229
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ LIST OF MAKES / MANUFACTURES OF E/M ITEMS TO BE INCORPORATED IN TENDERS OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR OF SWC
Ser Material Name of Manufactures / Brand Name No 1 2 3 1. ELECTRICAL ITEMS:- 1.BHEL 2. Seimens Ltd, TRANSFORMER Mumbai (a) Power Transformer, Andrew Yule 66/11 KV, 33/11 KV, 33/0 3. Bharat Bijlee 4. Crompton Greaves 433KV COPPER WOUND 5. Areva T&P India 6. PAC TIL Ltd 7. Volt Amps 8. Power wave Scheninder 9. Alstom (GEC) 10. Andrew Yule 11.ABB, Ltd, Banglore 12. Indian Transformers Electricals, Gurgaon 13. Kirloskar 14. Indotech Transformer 15. Patson 16. Voltamp Ltd, Transformer Baroda,Bharuch 17.Universal 18. NGEF Transformer 19. Rajasthan 20.Sankla Udhyog Transformers Jodhpur 21. C &S Electrical Ltd 22. Vardhman Electro Mech
(b) Transformer, 33KV, Current & Potential 1. Laxmi 2. Jyoti Ltd, Vadodara
3.Automatic electrical 4.pragati electrical New (AE) Delhi (c) Transformer, 11KV, 1. L & T 2.SIEMENS Current & Potential 3. Areva T&D Ltd 4.ELECTRIFIED COMPANY 5 .Automatic electrical 6. pragati electrical (AE) 7.Kappa Electricals 8.Crompton greaves (Chennai) 9.Control&System
2. Air break switch 11KV Gang 1. MULL & CO 2. ELPRO operated (GO / DO switch) 3. BHEL 4. Atlas 5.MEI 6.Southern Switchgear 7.Andrew Yule 8.Atlas, Jaipuria 9.Pactil 10. Jaipuria 11.ECE 12. AREVA 13.Mysore Electricals 14.GEC Industries. 15.Universal 16.Gr power switch.
3. Lightening Arresters (HT/LT) 1. ATLAS 2. ALSTOM 3. JAIPURIA BROTHERS 4. ALPRO 5. MADRAS PROCELIN 6. RASHTRIYA 7. MEI
4. HT/LT Insulator/ Composite 1. Southern Insulators 2. MYSORE Insulators 3. JAISHREE
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 230
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ LIST OF MAKES / MANUFACTURES OF E/M ITEMS TO BE INCORPORATED IN TENDERS OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR OF SWC
Ser Material Name of Manufactures / Brand Name No 1 2 3 5. Starters/ Contactors 1. GE 2.C&S 3. MDS 4. BCH 5. HAVELLS INDIA LTD 6. STANDARD 7. NOVATEUR ELECTR ICALS & DIGITAL SYSTEMS PVT LTD 6. Change over switch 1. HAVELLS 2.SIEMENS 3. LARSEN & TUBRO 4.CONTROL & SWITCHGEAR 5. CROMPTON 6. LEGRAND GREAVES 7. C&S ENGLISH 8.GE 9. ABB 10. HPL 11. GE/ SCHNEIDER 12.MDS 13. STANDARD 7. RCC/ELCB/ISOLATOR 1. C&S 2. Standard 3. L&T 4. GE 5. HPL 6. Legrand 7. Schneider 8. MDS 9. SINTEX 10.ELS SPELSBERG 11.NOVATEUR 12.UNIVERSAL ELECTRICALS & SWITCH DIGITAL SYSTEMS GEAR CONTROL PVT LTD 13. KOLORS 14. BENTEC
15. INDO ASIAN 16.M/S ABHUNIK SWITCHGEARS PVT LTD 17.HAVELLS INDIA LTD 18.BENTEC (STANDRED DIVISION) E LECTRICAL & ELECTRONICS PVT LTD 19.Polycab Wires Pvt Ltd (Brand Polycab) 8. Switch fuse unit/ HRC Fuses 1. GE /SIEMENS 2.HAVELLS INDIA LTD 3. INDO ASIAN 4. NOVATEUR ELECTRICALS & DIGITAL SYSTEMS PVT LTD 5. HPL 6. Standard 7. ASB LTD BANGLORE 8.JYOTI 9.MEI 9. HT/LT Joint kit (heart 1. M-Seal 2. Y-Denson Shrinkable/ Cold 3.Raychem RPG 4. Birla 3M Shrinkable/Push on) 5. Pirreli 6. Yamuna Gases & Chemicals 7.Densons 8.CCI 9.MAHINDRA & 10.SIEMEN MAHINDRA 11.RPG
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 231
PARTICULAR SPECIFICATIONS (CONTD..)
LIST OF MAKES / MANUFACTURES OF E/M ITEMS TO BE INCORPORATED IN TENDERS OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR OF SWC
Ser Material Name of Manufactures / Brand Name No 1 2 3 10. HT switch Gear 11 KV, 66 KV, 1. Indian Transfor 2 C&S 33 KV, VCB/ SFB Mers & Electricals 3. Siemens 4. GE/ CG 5. Andrew Yule 6. Southern switch gear Chennai 7. BHEL 11. HT Ring Main Unit, VCB, ITE, 1. Siemens 2.CG 11 KV 3. C & S 12. ACSR (Aluminium conductor 1.VK Conductors 2. Ujala steel reinforcement) 3. M/S KONARK, 4. Bharat Power Cables conductor Indconductor
13 Panel (Powder Coated) , AMF 1. Schiender 2. ABB PANEL/AUTOMATIC POWER 3. Powerware 4. L&T FACTOR CONTROL PANEL 5. ESS ESS KAY 6. Havells CPRI APPROVED 7. C & S 8. HPL 9. SS Electro Power 10. Standard 11. Indo - Asian 12. Crompton 13. Indiasian 14. Neptune 15. AKG, Precision 16. Kalinga, Shakti 17. Shreem 18. BCH 19. Henson Enterprises Pvt Ltd 20. M/S Sombani Envior Engg Pvt Ltd (Seepl) 21. Universal Switch Gear Control 22. Bafna Electrical Co - Jodhpur 23. Power System & Control 24. Sms Panels And Switch Gear New Delhi 25. Rem Electromech Pvt Ltd 26. Powertech Switchgears (I) Pvt Ltd (Powertech) 27. Shalabh (India) Ltd (Shalabh Switchgear) 28. C & S Universal Switchgear Control 29. Pixels, Ramp Technomation Private Limited (Brand- Ramp) 30. M/S Shiv Shakti Engineers Ahmedabad 31. M/S Osian Switch Gear & Controls Jodhpur 14. MCCB/ MCB 1. HPL 2. Sintex 3. Bentec 4. Legrand 5. L & T 6. C&S 7. ELS SPEL SBERG 8. Indo-Asian 9. Schneider 10. MDS 11. Standard 12. ABB 13. Simens 14. Anchor 15. Universal Switchgear 16. Kolors "Kwik Trip” Control, Ge/English Elect 17. Shalabh (India) Ltd 18. Havells India Ltd (Shalabh Switchgear) (Standard Division) 19. Novateur Electricals & 20. Bentec Electrical & Digital Systems Pvt Ltd Electronics Pvt Ltd 21. M/S Abhunik 22. Havells India Ltd Switchgears Pvt Ltd 23.Hager, Delhi Control Devices Pvt Ltd 15. Rising Main/ Bus Key trunking 1. Schneider 2. C & S Sandwitched Busbar
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 232
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’
LIST OF MAKES / MANUFACTURES OF E/M ITEMS TO BE INCORPORATED IN TENDERS OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR OF SWC
Ser Material Name of Manufactures / Brand Name No 1 2 3 16. DB 1. HPL 2. Hager 3. ABB 4. Indoasian 5. C&S 6. GE 7. Havells 8. Standard 9. Anchor 17. Relay 1. JAIPUR 2. HAGER (Electromechanical) 3. INDOASIAN 4. GE/ELECT
18. CTs/PTs 1. AE 2. Areva 3.Siemens 4.Crompton Greaves
19. Relay (Numerical) 1. L&T 2. Schneider 3. Hager 4. Crompton 5. GE/ English Elect 6. AE
20. Cable HT (XLPE) 1. RPG CABLES LTD- 2. POLYCAB THANE 3. FINOLEX 4. RAVIN CABLES LTD 5. INDUSTRIAL CABLES- 6. DIATRON HAVELLS PUNJAB INDIA LTD – NEW DELHI 7. PLAZA, PARAGON 8. ASIANS CABLES 9. GLOSTER CABLES LTD 10. HAVELLS 11. DIMOND POWER 12. CABLE CORPORATION INFRACTURE OF INDIA LTD(DIATRON) 13. EON ELECTRIC LTD PARAMOUNT
21 Cable LT (PVC/XLPE) UNIVERSAL PLAZA CABLES RPG CABLES LTD- HAVELLS INDIA LTD- THANE ALWAR POLYCAB KALINGA DIATRON ASIANS CABLES CABLE CORPORATION BONTONCABLES INDIA OF PVT LTD(BONTON) INDIA FINOLEX CCI BENTEC RPG/ASIAN KEI INDUSTRIES LTD M/S RR KABEL LTD NICCO RICHA CABLES PVT LTD FINOLEX HPL INDIA LTD ICL RAVIN CABLES LTD GLOSTER CABLES ASIANS CABLES LIMITED ANCHOR EON ELECTRIC LTD PARAGON WIPRO RRCABLE LTD INDOAMERICAN RAVIN CABLES LTD DNEO CABLES PVT LTD. 22. Wring Cable (FRLS/ HR 1. Wipro 2. Polycab FRLS) 3. Anchor 4. Havells 5. RPG Cables 6. RPG/Asian 7. HPL 8. Gloster Cables Ltd. 9.Indo American Electrical 10.Plaza 11.RR Cabel Ltd 12.Polycab 13.DNEO Cables Pvt Ltd.
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 233
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 23. Casing Caping / Conduit & 1 Presto Plast 2. Areva Abb Conduit Fittings 3 Finolex 4. Siemens 5 Kalinga 6. Cg 7. Precision 8. Plaza
9. Modi 10.Akg
11. Prince 12.Asian
3. Supreme 14.National
15. Polycab 16.Laxmi Engg Bhopal 24. Point wiring accessories i. e 1. Havells 2. Cona Switch/ Sockets/Bell 3. Anchor 4. Wipro Push/Ceiling Rose/Call Bell/Lamp Holder
25. Laminated Sheet 1. Anchor 4. Xylam
26. Air Circuit Breaker (AC B) 1. ABB 2. GE BCH HT/LT 600 Volts / LT ACB 415 Volts 3. Siemens 4. INDOASIAN
5. Havells India Ltd 6. C&S
7. Hager 8.Crompton Greaves
9. Schneider 10. HPL
11.Novateur Electricals & 12. Bentec Electrical Digital Systems Electronics Pvt Ltd
Pvt Ltd 13.English Elect 14.Larsen & Turbo Controland
Switchgear 15. Gec 16. Standard
17.Havells India Ltd 18. Larsen & Turbo (Standard Divison) 27. Indicating Lamps And LED 1. Havells 2. Goldwyn Lamps and fittings 3. Siemens 4. SYSKA 5. Star Tech 6. GE 7. Sun Star 8. Kripa Telecom 9. Elektron Lighting 10. VIN Semiconductors Systems 11. Orient Electric 12. Kolors 13. M/S Mega Energy 14. M/S Surya Roshni Solutions - Pune Limited Crompton Greaves Limited 15. Shakti Fixtures Pvt 16. C&S Ltd (Shakti) 28. Selector Switch/ Push 1. C&S 2. . AE Buttons 3. Kaycee 4. BCH 5. Concord 29 Amp meter/ Volt meter/ 1. C&CMECO 2. IMP Frequency meter 3. HPL 4. Havells 5.Hanger 6.Secure 7.Univerasal 8.Dgitron 9.Abb 10.Bhel 11.Siemens 12.Conzerv
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 234
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
30 Energy Meter (Tamper Proof) 1. HPL 2. Havells 3. Secure 4. Conzerve 5. Anchor 6. Accurate 7. Indo Asian 8. Jaipur Meters 9. AREVA 10. Legrand 11.Bentec Kolkata 12. RASS 13.Delhi Control 14.Bentec Electricals & Devices PVT LTD Electronics PVT LTD 15. Meco 16Concird
31. Steel/ ERW Steel Conduits 1. BEC 2. Vimco 3. Tata 4. Jindal 5. Tirupati 6. Prakahs Surya 7. Supreme 8. Greaves Cotton 9. Precision 10. AKG
32. DG Sets:- 1. Cummins 2. Kirloskar (a) Engine 3. Ashok Leyland 4. GREAVES –COTTON 5. MAHINDRA 6. TATA
(b) Alternator 1. Kirloskar 2. Areva 3. Crompton Greaves 4. Jyoti 5. Cummins 6. Alstom 7. Leroy Somer 8. Mahindra 9. Bharat Bijlee 33. Flame Proof Fitting/ Fixtures 1. Suddhir 2. Flexpro 3. Crompton Greaves 4. M/S Shyam Switchgears, Mumbai 5. Bajaj 6.Switchgears Ltd 7. M/S Baliga 8.Electricals, Nasik 9. Phillips 10.Electron Lighting System 11. FCG 12.Atlas Industries Ltd 13.. PLUTO
34 High Mast Lighting 1. GE/ English Elect 2. Philips 3. Bajaj 4. Crompton Greaves 5. Wipro 6.Metal Coats 7.Utkarsh Tubes & 8. Shakti Fixtures PVT Pipes LTD (Shakti)
35 Capacitor Bank (LT) 1. ABB 2. Universal 3. DUCATI 4. Shreem
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 235
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
36. Light Fitting & Accessories 1. ASIAN 2. GE 3. Bajaj 4. ANCHOR 5. Havells 6. ABUNIK SWITCHGEARS PVT LTD 7. Osram 8. Surya Roshni Ltd 9. Legrand 10.Polycab wires PVT Ltd
37. Steel Tubular Poles India Tube And Co Metal Coats Chennai India Electric Poles Riddi Poles Vadodara Mfg Co, Maharashtra Quality Steel Products Sankhla Poles Jodhpur Ltd, Kanpur The National Tubing Surjit Singh & Co Mohali Company, Kanpur Kalinga Tubes M/S Anil Engineering Corporation Kanpur, M/S, Bharat Steel Bharat Conduit And Steel Tubes, Haryana Wks Kanpur M/S Sohanlal, Metal Coats Chennai Gaziabad M/S Jindal Steel Riddi Poles Products,Kanpur Vadodara Bombay Tubes
38. PCC Poles M/S Cement Fabric Cement Fabric India Ltd India, Jodhpur Chandigarh Punjab M/S Hindustan Pre-Stressed Concrete Ltd Prestressed Concrete, Chandigarh, Faridabad M/S Indian Pcc Poles Precto, Chandigarh M/S Concrete Udyog Sri Balaji Enterprises Jhansi M/S Sankla Udyog, Beton Concrete Product, Jhansi Aurangabad M/S Sankhla Udhog M/S Concrete Fabrics Jodhpur Haryana Ma Pre-Stressed Works Jodhpur 39. Ceiling Fan/ Fan Regulator 1. Usha 2. Bajaj 3. Khaitan 4. Orient 5. Crompton 6. Polar 7. Havells 8. Legrand 9. EON ELETRIC LTD 10. ALMONARD 11. CROMPTON 12. ANCHOR GREAVES 13. GEC 14. GE 15. Polycab wires PVT LTD 16.Marc Enterprises (Polycab) PVT LTD (Marc)
40. Exhaust Fan/ Cabin Fan/ 1. ANCHOR 2. Bajaj Air Circulator 3. Havells 4. Orient 5. GEC
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 236
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
41. Geysers 1. Recold 2. Bajaj 3. Venus 4. Usha Lexus 5. Jaguar 6. Havells 7. CG 8. Vguard 9. PEARL 10. Orient 11. Madhuban
42. Fluorescent Tube Rod 1. Asian 2. Surya Roshni 3. HPL 4. Bajaj 5. GE 6. Havells 7. Osram 43. CFL 1. Philips 2. Crompton 3. Wipro 4. ENGLISH ELECT 5. GE- LIGHTING 6. Osram 7. Surya 8. HPL 9. INDO-ASIAN 10. ROSHNI 11.Shakti Fixtures PVT LTD (Shakti) 12.Havells 13.BAJAJ 14.HALONIX 15.LUXOLITE 16. Bajaj
44. Bulk Head Fitting 1.Havells 2.GE 3. Crompton Greaves 4. Philips 5. Bajaj 6.Prakash
45 Street Light Fitting (HPSV/ 1.Phillips 2.Crompton Greaves HPMV/ FLUORESCENT/ CFL) Energy saving lights 3. Bajaj 4. Havells 5. Wipro 6. GE 7. Orient 8. Surya Roshni Ltd 9. CONTROL 10. KALIN LIGHT &SWITCHGEARS 11. ASIAN 12. Polycab wires 13.Shakti Fixtures PVT LTD PVT LTD (Shakti) 46 LED Light 1.Phillips 2.Crompton Greaves Fitting 3. Bajaj 4. Havells 5. Wipro 6. GE 7. Orient Electric 8. Surya Roshni Ltd 9. Shakti Fixtures Pvt Ltd Shakti) 10. M/s RRKabel Ltd 11. Osram 12. KOLOR 13. Vin Semiconductors 14. M/s Mega EnergySolutions Pune 15. Kripa Telecom 16. Goldwyn 17. Sun Star 18. Star Tech 19. Siemens 20. Syska 21. Elektron LightingSystems
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 237
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 47. VOLTAGE STABILIZER (a) 5 KVA to 25 KVA 1. Brentford 2. AEI Mumbai 3. M/S VINTEK 4. Aplab ELECTRONICS (VOLINA) 5. POWER TECH 6. AE
(b) Above 25 KVA 1. Sinetrac 2. INDIAN TRANSFORMER & ELECT GURGOAN 3. Aplab 4. M/S VINTEK ELECTRONIC(VOLINA)
(c) Upto 5 KVA 1. Brentford 2. Blue Line 3 Power Tech 4. ITE, 5. Volina 6. Gurgaon 48. EOT/ HOT Cranes 1. Cranex 2. Rock Well 3. Indef 4. Universal 5. Tib Udyog 49 LIFTS 1. Otis 2. Kone 3. Schneider WATER SUPPLY ITEMS:- 1. Motors/ Starters 1. Bharat Bijlee 2. ABB 3. BCH 4. NGEF 5. HAVELLS 6. Siemens 7. Jyoti 2. PUMPS:- 1. KIRLOSKAR 2. MATHER & PLATT BROTHER LTD 3. CG 4. WASP 5. KSB 6. JYOTI 7. JOHNSON 8. BHEL ENGLISH ELECT 9. BEACON 10. ABB 11. GRUNDFOSS 12. SIEMENS 13. ARMSTRONG 14. CALAMA 15 . WASP
(a) Centrifugal 1. Kirloskar Brothers 2. KSB Ltd 3. Crompton Greaves 4. Jyoti 5. Beacon 6. Mather & Plant 7. Wasp (b) Submersible 1. Kirloskar Brothers 2. KSB Ltd 3. Crompton Greaves 4. Calama 5. Beacon 6. Mather & Plant 7. Texmo 8. Jyoti (Coimbatore) (c) Vertical Turbine 1. Kirloskar 2. KSB 3. Johnson 4. Crompton 5. Jyoti 6. Worthington 7. Wasp
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 238
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’ APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3 3. GI Tubing & Fittings 1. SURYA ROSHNI Ltd 2. Swastik
3. Prakash 4. BST 5. Advance Steel 6. Oswal Tubes
4. CI Pipes & CI Fittings / 1. RASHMI METALIKS 2. LANCO INDUSTRIES Specials LTD LTD 3. Kesoram (Birla 4. Kejriwal Group) 5. Tisco 6. Lisco 7.Kesospun 8. SKF BRAND
9.JINDAL SAW LIMITED 5. Ductile Iron (DI) Pipes & Tata Metalics Fittings Electo Steel Castings Ltd Lanco Industries Ltd Electro Therm Jai Balaji Industries Ltd Kolkatakapilansh Dhatu Udhog
6. HDPE Pipes and fittings 1. FINOLEX 2. PRINCE 3. KISAN 4. SUPREME 5. SFMC 6. SINTEX 7. JAIN IRRIGATION 8. RELIANCE SYS INDUSTRIES 9. TIRUPATI
7. Sluice Valve/ Reflux Valve/ 1. KALPANA 2. AUDCO High Pressure SV/ RV/ Gate 3. KEJRIWAL 4. KSB Valve/ Foot Valve 5. Leader ISI 6. Upadhyaya 8. NRV/ Air Release Valve 1. KALPANA 2. KSB 3. KARTAR 4. BIR s 5. Leader 6. Upahyaya
9. Submersible Cable 1.BCH 2.Havells 3.RR KABEL 4.RALLISON
10. Motors Starter 1. GE 2. Havells 3. C & S 4. MDS
5. BCH
11. Single Phase Preventor/ 1. C&S MINILEC 2. GE Phase Sequence Corrector 3. BCH 4. Minilec
5. Siemens 6. Havells
12. 1. Capital Control 2. M/S SOMBANI Choloronome Plant ENVIOR ENGG PVT LTD 3. PALTERSON 4. MAIC (INDAI)
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 239
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘B’
APPROVED LIST OF MAKES / MANUFACTURES OF B/R ITEMS TO BE INCORPORATED OF ALL MES FMNS & ITS SUBORDINATE UNITS IN AOR SWC
Srl Materials NAME OF MANUFACTURERS / BRAND NAME No 1 2 3
13. Bleaching Dozer 1. Capital Control 2. M/S SOMBANI ENVIOR ENGG PVT LTD 3. AQUA PURA 4. Maic (India) 5. PALTERSON 6. MAIC(INDIA) 14. Chemical Dozer/ Sodium 1. MILTON ROY 2. TECHNOMAC Hypochlorite Solution
15. C PVC PIPES (FLOW GUARD) 1. Ajay 2. Ashirvad
Note-(i) Before placing the bulk supply order on any of the above listed firms/ manufacturers, copy of the same shall be endorsed to GE for reference. (ii) The Solar Panel, Solar inverter ,Junction box, etc manufacture by the firm With MNRE approved may be accepted provided the iteams have been manufactured by the firm itself and not procured by other agency.
SIGNATURE OF CONTRACTOR DY DIRECTOR (CONTRACTS) FOR ACCEPTING OFFICER
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 240
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘C’
SOURCES OF MATERIALS
Sl No Name of Materials Sources of materials for works at station*
1 2 3
1. Coarse aggregate for all RCC and PCC Phalodi/Khara/Kho works 2. Sand for motar in masonry, Seal Coat Binwas/Kolayat plastering and pointing.
3. Stone for stone masonry, soling,Pitching Fidusar/Balesar hardcore and WBM
4. Chipping for premixed carpet Balesar 5. Kerb stone for road edging and stone slab Balesar for cable protection cover * Sources indicated are for guidance only.
NOTES:-
1. Sources of materials shall be as above or in the vicinity thereof. The tenderer shall ascertain the actual position/exact location of source before submitting his tender and no additional payment shall be made on account of misunderstanding of its distance from site of works. Contractor may bring material conforming to contract specifications from other sources without any price adjustment after obtaining written approval of GE.
2. The tenderer shall amongst other things also ascertain all information such as royalties, taxes duties and other charges etc, on the materials and no additional payment shall be made on account of the foregoing.
3. However, if due to any ban imposed by the state Govt authority on obtaining the materials from the sources specified above and or specified materials is not available at the sources mentioned above these materials conforming to specifications as given in particular specifications will be procured from any other place/source after getting the same approved from GE in writing and without any extra cost to Govt.
SIGNATURE OF CONTRACTOR DY DIRECTOR (CONTRACTS) FOR ACCEPTING OFFICER
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 241
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’
RECOVERY CHARGES FOR TESTING OF MATERIALS
Sl Materials Tests Method of Frequency Level Recovery Remarks No Testing of Tests of Rate Test Rs. Ps. 1 2 3 4 5 6 7 8 ______
1. Bricks(i)Comprehensive IS-3495 As per IS-5454 Check for Strength PART II(Contd..) as given ‘A’180.00 Visual and under dimensional characteristics shall also be carried out as per IS-5454
(ii) Water -do- ‘A’ 150.00 absorption
(iii) Efflo- -do- ‘A’ 180.00 resence (Part I) Lot Sample Permissible sample size size of defective bricks ______(i) 1001 5 0 to 10,000
(ii) 10001 10 0 to 35,000
(iii) 35001 15 1 to 50000
2. Coarse (i) Sieve IS-2386 One test for every ‘A’ 120.00 aggregate Analysis Part-I 15cum of aggregates or part thereof. (ii) Flakiness -Do- -Do- ‘A’ 90.00
(iii) Estimation IS-2386 One test for every ‘A’ 120.00 of dele terious Part I 100cum of aggregate materials or part thereof
(iv) Organic -Do- One test per ‘C’ 120.00 impurities source of supply
(v) Moisture -Do- Regularly as ‘A’ 120.00 contents PART II(Contd..) required
(vi) Specific -Do- One test for each ‘B’ 120.00 gravity source of supply
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 242
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’ (contd...)
1 2 3 4 5 6 7 8
3. Fine (i) Sieve IS-2386 One test for every ‘A’ 180.00 Aggre Analysis Part I 15M3 of Fine Gate aggregate or Part when brought to site.
(ii) Test for IS-2386 One test for every ‘A’ 90.00 clay silt & Part I 15 M3 of fine impurities aggregate or part when brought to site.
(iii) Specific -do- One test for each ‘A’ 180.00 gravity PART II(Contd..) source of supply
(iv) Moisture -do- Regularly as ‘A’ 180.00 contents PART II(Contd..) required subject to 2 tests/day when being used. (v) Test for -do- One test for each ‘C’ 180.00 organic PART II(Contd..) source of supply impurities
4. Struc- (i) Slump IS-1199 The minimum freque ‘A’ 180.00 * tural test or com- 1959 ncy of sampling of concre- packing fac- concrete of each te M-15 tor test or grade shall be as grade Vee-Bee time under :- & above (ii) Compre- IS-516 ‘A’ 120.00 * * ssive strength
Quantity of concrete in Number of samples for 28 days Number of samples work in cubic metre strength for 7 days strength 1-4 1 1 6-15 2 1 16-30 3 1 31-50 4 1 51 & above 4 Plus 1 additional sample for 1 each additional 50 cubic metre or part thereof
TEST SPECIMEN AND TEST RESULTS Three test specimens shall be made for each sample. The test results shall be the average of the strength of these specimens. The individual variation should not be more than (+/-) 15% of the average, if more the test results of the sample shall not be valid.
* (i) Random sampling carried out to cover all mix unit. * * (ii) Refer IS-456 clause 14 for frequency of sampling.
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 243
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’ (contd...)
1 2 3 4 5 6 7 8
5. (a) PCC @ (i) Compre- IS-2156 8 Block out 14 ‘A’ 60.00 Block ssive 1984 For strangth (Appx ‘B’) walling (Hollow Block) (ii) Water -do- 3 Block out 14 ‘B’ 120.00 absorption (Appx B)
(iii) Density -do- 3 Block out 14 ‘B’ 90.00 (Appx ‘A’)
@ Samples :- 14 blocks from consignment of every 5000 blocks or part thereof
(b) PCC Solid Blocks For Walling ***
(i) Compressive IS-2185 8 Blocks out ‘A’ 60.00 strength of 20.
(ii) Water -do- 3 Blocks out ‘A’ 120.00 absorption of 20.
(iii) Density -do- 3 Blocks out ‘A’ 120.00 of 20.
(iii) Drying -do- 3 Blocks out ‘A’ 120.00 Shrinkage of 20.
(iii) Moisture -do- 3 Blocks out ‘A’ 120.00 Movement of 20.
*** Samples 20 blocks from consignment of every 5000 Blocks or Part thereof. These blocks to be checked for dimension and weight.
6. Cement * (i) Water IS-1237-1980 6 Tiles out ‘B’ 180.00 floor- absorption of 18. ing Tiles/ Appx ‘D’ Terrazo Tiles. (ii) Wet -Do- -Do- ‘B’ 144.00 Transverse Appx ‘E’ Strength
(iii) Resis- -Do- -Do- ‘C’ 540.00 tence to Appx ‘F’ wear.
* Samples : 18 tiles from each source of supply selected at random.
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 244
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’ (contd….)
1 2 3 4 5 6 7 8
7. Burnt Clay **(a) Water IS-3495 6 Tiles out ‘B’ 216.00 Roofing absorption (PART II(Contd..) ) of 12 tiles As Per IS-2690 (b) Compre-IS3495 Part-II ssive (Part I) -do- ‘A’ 180.00 length 150mm strength to 250mm width –100mm to 200mm ** Samples : 12 tiles from each source of supply thickness selected at random 35mm to 50mm
8. Mangalore***(i) Water IS-654 6 tiles out ‘A’ 180.00 pattern absorption Appx ‘A’ of32 roofing tiles (ii) Break- IS-654 ing load Appx ‘C’ -do- ‘A’ 120.00
*** Samples : 36 tiles from each consignment of 3000 tiles or part thereof. These tiles shall be checked for dimension.
9. Timber (i) Specific IS-1708- Maximum 3 ‘B’ 120.00 gravity & 1960 Samples from weight a lot of 4 cum or 250 pieces of seasoned timber
(ii) Moisture -do- ‘A’ 120.00 content.
10. Water * (i) Test for IS-456 Once at the ‘C’ 240.00 for Acidity & 3015 stage of constn approval of purpose source of (ii) Test for -do- water ‘C’ 240.00 alkalinity.
(iii) Test for -do- ‘C’ 300.00 solid contents.
* Also refer clause 4. 3 of IS-456 and its subsequent sub clauses regarding suitability of water.
11. Welding ** Visual IS-822-1970 100% by visual -Work 360.00 of steel inspection Clause 7. 1 inspection site work test
** Specialized tests their method and frequency to be decided on consideration of their importance by the Accepting Officer.
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 245
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’ (contd...)
1 2 3 4 5 6 7 8
12. Timber (a) Dimension IS-1003-1977 Frequency of ‘A’ 180.00 paneled and sizes, work- (Part- I) sampling from window finish. Each lot shall shutter (including be as under :- factory made shutters) Lot size Sample size 26 to 50 5 51 to 100 8 101 to 150 13 151 to 300 20 301 to 500 32 501 to 1000 50 1001 & above 80
(b) Strength IS-1303- From each lot ‘C’ Test 1990 5% of the factory made shutters (i) Slamming shall be tested (ii) Impact -do- for strength test. Indentation (iii) Shock -do- resistance (iv) Edge -do- loading
13. Ply Wood (a) Moisture IS-1734 Six test pieces ‘B’ 240.00 IS-303 contents. 1953 cut from each -1989 Part I of the boards selected as per table shall be subjected to tests.
# Sampling shall be as per IS 7835-1975 tables
14. Veneered $ (a) Density IS-635 Three test spe- ‘C’ 60.00 Wood particle (Part I) cimen’s from Board each sample (size (medium 150mmx75mm) density) IS-3097 (b) Moisture -do- -do- ‘C’ 60.00 1985 content
(c) Water -do- -do-(size ‘C’ 60.00 absorption (Part-16) 300mmx300mm
(d) Swelling -do- -do-(size ‘A’ 60.00 due to surface (Part-17) 125mmx100mm absorption
(e) Swelling -do- -do- (size ‘A’ 60.00 in water 200mmx100mm
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 246
PARTICULAR SPECIFICATIONS (CONTD..)
APPENDIX ‘D’ (contd….)
1 2 3 4 5 6 7 8
(f) Modulus -do- Three test ‘C’ 90.00 of rupture (Part-4) specimen as per IS-2380-77
(g) Screw -do- -do- as per ‘C’ 120.00 withdrawal (Part-4) IS-2385 strength
$ Sampling shall be as per IS-3487-83 with metre.
15. Cement (i) Setting IS-4031-63 Once for each ‘B’ 200.00 time Re-Affir- consignment med-1984 or as and when required
(ii) Soundness -do- -do- ‘B’ 132.00
(iii) Compre- -do- -do- ‘B’ 395.00 ssive strength
(iv) Fineness -do- -do- ‘B’ 132.00
Legend ‘A’ - Site lab ‘B’ - Zonal lab ‘C’ - National Test House/SEMT, CME Pune/Local Engg College
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 247
PARTICULAR SPECIFICATIONS (CONTD..)
ANNEXURE –I
DETAILS REQUIRED FOR POWER PLANT PERFORMANCE GUARANTEE TEST
1. The Contractor shall fill the CUF for 12 months period considering the reference Global Average Rediation indicated in the below table.
2. The same will be used for the Performance Guarantee purpose.
3. The CUF for the respective year should in no case be lower than the minimum CUF factor given in the table below.
4. This year 1 CUF factor given by the Contractor should not be lower than total of Performance Guarantee in table 02 below i.e 15%.
5. The Contractor shall furnish performance guarantees for the Solar PV modules for O&M period as given below :-
Table - 01: - Solar PV module performance guarantee
Particulars % of the specified actual Applicable test capacity or requisite codes capacity of the PV panel (whichever is lower) Degradation at the end of the 10th year of operation from the date of take over
Degradation at the end of the 25th year of operation from the date of take over
CA No. CE (AF) G/PHALODI/OLD/65 OF 2017-2018 SERIAL PAGE NO. 248
PARTICULAR SPECIFICATIONS (CONTD..)
ANNEXURE –I (contd…)
Table : - 2 Solar PV power plant net power generation
1. The table below indicated the CUF for each of the year during O&M period.
2. The below quoted CUF for any year shall be permitted with maximum 1% degradation factor in previous year generation.
3. Also, the CUF quoted by the Contractor should not be lower than the Minimum CUF given in the table below for the respective years.
4. Bids failing to fulfill the conditions stated in point above can be rejected by the Company for further evaluation.
Sr Year Minimum CUF as given in Minimum CUF as given in No. the Bid by the Company the Bid by the Contractor 1. Year 1 15% 2. Year 2 14.83% 3. Year 3 14.66% 4. Year 4 14.49% 5. Year 5 14.33%
(Sign and seal of Bidder) Date Place
SIGNATURE OF CONTRACTOR DY DIRECTOR (CONTRACTS) FOR ACCEPTING OFFICER