DPX and BPS Synthetic Resin Mountants

Total Page：16

File Type：pdf, Size：1020Kb

DPX and BPS Synthetic Resin Mountants A mixture of distyrene (a polystyrene), a plasticizer (tricresyl phosphate), and xylene , called DPX, was introduced in 1939 and later modified by the substitution of a more satisfactory plasticizer, dibutylphthalate (butyl, phthalate, styrene - BPS). This colorless, synthetic resin mounting media is now available at Electron Microscopy Sciences, DPX, and it has generally replaced xylene-balsam. They preserve stains and dry quickly; surplus mountant may be peeled off the preparation after cutting around the cover slip with a razor blade or scalpel. They are not recommended for use with thick sections (eg. cellulose nitrate) where there is a danger of retraction of the mountant upon drying. Refractive index ( 15 C ) 1.525 Canada balsam , yellow, oily, resinous exudation obtained from the balsam fir . It is an oleoresin with a pleasant odor but a biting taste. It is turpentine rather than a true balsam. On standing, the essential oil in Canada balsam evaporates, leaving behind the resin as a hard, transparent varnish. Canada balsam is valued as an optical mounting cement, e.g., for lenses and microscope slides, since it yields, when dissolved in an equal volume of xylene, a noncrystallizing cement with a refractive index nearly equal to that of ordinary glass. It is used also in paints and polishes. Canada balsam, also called Canada turpentine or balsam of fir, is a turpentine which is made from the resin of the balsam fir tree (Abies balsamea). It is the fir's resin, dissolved in essential oils, and is a viscous, sticky, colourless (sometimes yellowish) liquid, that turns to a transparent yellowish mass when the essential oils have been allowed to evaporate. Due to its high optical quality, its refractive index (n = 1.55, very close to that of glass), and its purity it is mainly used in optics as an invisible-when-dry glue for glass. It is soluble in xylene, amorphous when dried, and it does not crystallize with age, so its optical properties do not deteriorate.[citation needed] .

Copy Link

Recommended publications

Mounting Media - an Untouched Aspect
REVIEW ARTICLE Mounting Media - An Untouched Aspect Fatema Saify1, Nidhi Tiwari2 ABSTRACT Introduction: Mounting a tissue specimen is essential for preserving the specimen during storage as well as for enhancing imaging quality during microscopy. Samples are mounted in a wide variety of media, with a corresponding range of properties, for examination under microscope in the biomedical sciences. The mounting medium holds the specimens in place between the cover slip and the slide. Objective: This review is an attempt to summarize on various types of mounting media and their uses in histopathology as less is discussed about mounting media in the literature. Material and methods: Data was obtained and analyzed from previously published literature and electronic database search- es from PubMed and Google Scholar. Results: Mounting media for permanent slides can be categorized into water-based and organic solvent based mounting me- dia. Different mounting media are used for electron microscopy, immunofluorescence slides and ground sections. Conclusion: There are many commercial and home-made mounting media available. Refractive index plays an important role in choosing a mountant. A mounting media should be chosen which suits the preser- vation of the required sections for future research. Key words: Coverslip, Canada balsam, mounting media Oral and Maxillofacial Pathology Journal (2020): http://www.ompj.org/archives. INTRODUCTION 1-2Department of Oral Pathology and Microbiology, Government Mounting is the last step in the series of histological preparation Dental College, Raipur, India. of a slide. This protects the cell film from damage, air drying and Corresponding Author: Fatema Saify, Department of Oral stain fading. For proper visualization of cellular characteristics, Pathology and Microbiology, Room No -6, Government Dental the refractive index (RI) of the glass, cellular material, coverslip, College, Raipur (C.G), India.
[Show full text]
B.Sc.( Srmester-3) Subject: Physics Course: US03CPHY01 Title: Optics
B.Sc.( Srmester-3) Subject: Physics Course: US03CPHY01 Title: Optics UNIT – III Polarization Introduction:- • Interference and diffraction phenomena proved that light is a wave motion. These phenomena are used to find wavelength of light. However, they do not give any indication regarding the character of waves. • Maxwell developed electromagnetic theory and suggested that light-waves are electromagnetic waves. Electromagnetic waves are transverse waves, so it is obvious that light waves are also transverse waves. • Longitudinal waves are waves in which particles of medium oscillate along the direction of propagation of wave (e.g. sound wave). • Transverse waves are waves in which particles of medium oscillate perpendicular to the direction of propagation of wave. (e.g. Electromagnetic waves.) • Polarization is possible in transverse wave. • Unpolarized Light is the light is which the planes of vibration are symmetrically distributed about the propagation direction of the wave. • Plane Polarized light is a wave in which the electric vector is everywhere confined to a single plane. • A linearly polarized light wave is a wave in which the electric vector oscillates in a given constant orientation. Production of Linearly Polarized Light: Linearly polarized light may be produced from unpolarized light using following optical phenomena. (i) Reflection (ii) Refraction (iii) Scattering (iv) Selective absorption (v) Double reflection. Polarized light has many important applications in industry and engineering. One of the most important applications is in liquid crystal displays (LCDs) which are widely used in wristwatches, calculators, T.V. Screens etc. An understanding of polarization is essential for understanding the propagation of electromagnetic waves guided through wave-guides and optical fibers.
[Show full text]
Chapter 7 Lenses
Chapter 7 Lenses Chapter 7 Lenses © C. Robert Bagnell, Jr., Ph.D., 2012 Lenses are the microscope’s jewels. Understanding their properties is critical in understanding the microscope. Objective, condenser, and eyepiece lenses have information about their properties inscribed on their housings. Table 7.1 is an example from objective lenses. This chapter will unfold the meaning and significance of these symbols. The three main categories of information are Numerical Aperture, Magnification / Tube Length, and Aberration Corrections. Zeiss Leitz Plan-Apochromat 170/0.17 63X/1.40 Oil Pl 40 / 0.65 ∞/0.17 Nikon Olympus Fluor 20 Ph3 ULWD CDPlan 40PL 0.75 0.50 160/0.17 160/0-2 Table 7.1 – Common Objective Lens Inscriptions Numerical Aperture & Resolution Figure 7.1 Inscribed on every objective lens and most 3 X condenser lenses is a number that indicates the lenses N.A. 0.12 resolving power – its numerical aperture or NA. For the Zeiss lens in table 7.1 it is 1.40. The larger the NA the better the resolving power. Ernst Abbe invented the concept of numerical aperture in 1873. However, prior to Abbe’s quantitative formulation of resolving power other people, such as Charles Spencer, intuitively understood the underlying principles and had used them to produce 1 4˚ superior lenses. Spencer and Angular Aperture 95 X So, here is a bit about Charles Spencer. In the mid N.A. 1.25 1850's microscopists debated the relationship of angular aperture to resolution. Angular aperture is illustrated in 110˚ Pathology 464 Light Microscopy 1 Chapter 7 Lenses figure 7.1.
[Show full text]
How to Generate Polarized Light?
Before this lecture there were two lectures: 1. Qualitative description of polarization and generation of various polarized light. 2. Quantitative derivation and explaining the observations. 08/08/2017 How to generate Polarized Light? 1.Dichroic materials 2.Polarizer 3.Birefringent materials 4.Reflection 5.Scattering Wire grid polarizer Birefringence Polarized Reflecting Light • When an unpolarized light wave reflects off a non-metallic surface, it can be completely polarized, partially polarized or unpolarized depending on the angle of incidence. A completely polarized wave occurs for an angle called Brewster’s angle (named after Sir David Brewster) Snell's law Incident Reflected ray ray p n 90o 1 n2 r n1sin P = n2sin r n1sin P = n2sin r = n2sin (90-P) = n2cos P tan P = n2/n1 P = Brewster’s angel Reflection • When an unpolarized wave reflects off a nonmetallic surface, the reflected wave is partially plane polarized parallel to the surface. The amount of polarization depends upon the angle (more later). The reflected ray contains more vibrations parallel to the reflecting surface while the transmitted beam contains more vibrations at right angles to these. Applications • Knowing that reflected light or glare from surfaces is at least partially plane polarized, one can use Polaroid sunglasses. The polarization axes of the lenses are vertical as the glare usually comes from reflection off horizontal surfaces. Polarized Lens on a Camera Reduce Reflections Polarization by Scattering • When a light wave passes through a gas, it will be absorbed and then re-radiated in a variety of directions. This process is called scattering. y Gas molecule z O Unpolarized x sunlight Light scattered at right angles is plane-polarized Polarization by Scatterings Retarders • In retarders, one polarization gets ‘retarded’, or delayed, with respect to the other one.
[Show full text]
PME557 Engineering Optics
PME557 Engineering Optics Wei-Chih Wang National Tsinghua University Department of Power Mechanical Engineering 1 W.Wang Class Information • Time: Lecture M 1:20-3:10 (Eng Bldg 1 211) Lab Th 1:10-2:10 PM (TBA) • Instructor: Wei-Chih Wang office: Delta 319 course website: http://depts.washington.edu/mictech/optics/me557.index.html • Suggested Textbooks: - Optical Methods of Engineering Analysis, Gary Cloud, Cambridge University Press. - Handbook on Experimental Mechanics, Albert S. Kobayashi, society of experimental mechanics. - Applied Electromagnetism, Liang Chi Shen, Weber&Schmidt Dubury - Fundamentals of Photonics, B. Saleh, John Wiley& Sons. - Optoelectronics and Photonics: Principles and Practices, S. O. Kasap, Prentice Hall. - Fiber optic Sensors, E. Udd, John Wiley& Sons - Selected papers in photonics, optical sensors, optical MEMS devices and integrated optical devices. 2 W.Wang Class information • Grading Homework and Lab assignments 80% (3 assignments and 3 lab reports) Final Project 20% • Final Project: - Choose topics related to simpleo free space optics design, fiberopic sensors, waveguide sensors or geometric Moiré, Moiré interferometer, photoelasticity for mechanical sensing or simple optical design. - Details of the project will be announced in mid quarter - Four people can work as a team on a project, but each person needs to turn in his/her own final report. - Oral presentation will be held in the end of the quarter on your final project along with a final report. 3 W.Wang Objectives The main goal of this course is to
[Show full text]
Natsca News Issue 14-6.Pdf
http://www.natsca.org NatSCA News Title: A New Method for the Restoration of Palaeontological Specimens Mounted in Canada balsam Author(s): Allington‐Jones, L. Source: Allington‐Jones, L. (2008). A New Method for the Restoration of Palaeontological Specimens Mounted in Canada balsam. NatSCA News, Issue 14, 28 ‐ 32. URL: http://www.natsca.org/article/191 NatSCA supports open access publication as part of its mission is to promote and support natural science collections. NatSCA uses the Creative Commons Attribution License (CCAL) http://creativecommons.org/licenses/by/2.5/ for all works we publish. Under CCAL authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, and/or copy articles in NatSCA publications, so long as the original authors and source are cited. NatSCA News Issue 14 A New Method for the Restoration of Palaeontological Specimens Mounted in Canada balsam Lu Allington-Jones, Natural History Museum Abstract Many museums contain slides mounted with Canada balsam. If this resin is poorly prepared, it can become crazed. Examples can be found within the British Type Graptolite Collection at the Natural History Mu- seum, London. These are delicate dendroids prepared using the transfer technique. A search of the avail- able literature and communication with museum workers highlighted suggestions for methods to rescue the cracked slides. These methods were tested, and the most suitable method proved to be a double transfer technique utilising carbowax. This technique may be used to rescue any specimen which is mounted in Canada balsam and which possesses an exposed surface.
[Show full text]
Mounting Media: an Overview
See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/261570397 Mounting media: An overview Article · January 2014 DOI: 10.4103/2277-8632.128479 CITATIONS READS 17 5,179 3 authors, including: Rooban Thavarajah Ragas Dental College 113 PUBLICATIONS 755 CITATIONS SEE PROFILE Some of the authors of this publication are also working on these related projects: Analysis of adverse events with use of orthodontic sequential aligners as reported in the manufacturer and user facility device experience database View project Tobacco and oral disease burden among women population of India View project All content following this page was uploaded by Rooban Thavarajah on 08 September 2019. The user has requested enhancement of the downloaded file. [Downloaded free from http://www.jdrntruhs.org on Sunday, September 8, 2019, IP: 210.18.181.41] RRevieweview AArticlerticle Mounting media: An overview Shamala Ravikumar, R. Surekha, Rooban Thavarajah1 Department of Oral and Maxillofacial Pathology, Navodaya Dental College, Raichur, Karnataka, 1Department of Oral and Maxillofacial Pathology, Ragas Dental College and Hospital, Chennai, India ABSTRACT Histological sections, which need to be examined for any length of time or to be stored must be mounted under a cover-slip. There are various types of mounting media available both commercially and also are prepared in one’s own laboratory for mounting tissue sections. Some types of mounting media harden to hold the coverslip ﬁ rmly in place and other types use different solvents such as water, glycerin and xylene because the stains in the sample preparation are sensitive to particular solvent. In order to prevent the of immonoﬂ urescent slides, few mounting media contain antifade reagents.
[Show full text]
Histology Guide
HISTOLOGY PRODUCT GUIDE Polysciences Chemistry beyond the ordinary polysciences.com • 1.800.523.2575 1 2 polysciences.com • 1.800.523.2575 Polysciences, Inc. manufactures specialty chemicals and reagents for histology, light microscopy and anatomic pathology as well as other clinical, research and life sciences applications. Our full product catalog contains thousands of unique and specialty products, such as embedding media, special stain kits, tissue marking dyes, mounting media, fixatives, certified and fluorescent dyes & stains, IHC and in situ products used by histology professionals. We work everyday to provide high quality products to support the investigative and diagnostic vision of histology laboratories. To learn more please visit Polysciences.com. CONTENTS FIXATION ...................................................................................................................................................................... 4 DECALCIFYING .......................................................................................................................................................... 6 TRANSPORT BUFFERS ................................................................................................................................................ 6 GROSSING .................................................................................................................................................................. 7 PROCESSING .............................................................................................................................................................
[Show full text]
Cdlecture Lecture2.Pdf
28 Electromagnetic waves: • synchronized oscillations of electric and magnetic fields that propagate at the speed of light • oscillations of the two fields are perpendicular to each other and perpendicular to the direction of energy and wave propagation • characterized by wavelength/frequency • In following, we initially only consider the electric field part (convention)! Chiroptical spectroscopy | Prof. Dr. C. Merten 29 Light (i.e. the electromagnetic wave vector) propagating along the z-axis towards the observer can be randomly linearly circularly elliptically polarized polarized polarized polarized Polarization is … a property of waves that describes the orientation of their oscillations Chiroptical spectroscopy | Prof. Dr. C. Merten 30 Infrared UV/vis Globar Deuterium arc lamps (190-370 nm) . SiC rod, electronically heated to 980-1650 °C Tungsten halogen (320-1100 nm) . typically between 5-8 mm x 20-50 mm . emits radiation with wavelength of 4-15 µm . spectral behaviour similar to black body … besides lasers, all UV/IR light sources emit completely randomly polarized light, i.e. a mixture of all kinds of polarizations. Chiroptical spectroscopy | Prof. Dr. C. Merten 31 E-field oscillates in a selected plane, here the xz plane, propagating in z- direction. Linear polarized light in any plane can be divided into an x- and y- component which oscillate in phase (phase shift d=0) Example: -45° polarization Chiroptical spectroscopy | Prof. Dr. C. Merten 32 If one introduces a phase shift of exactly ±90° (l/4) between x- and y-component, circular polarization is obtained: Chiroptical spectroscopy | Prof. Dr. C. Merten 33 From the observers view towards source: From view point of source Electric vector rotates clockwise Electric vector rotates counter-clockwise Right circular polarized light Left circular polarized light Rule: Point thumb of left or right hand Rule: Point thumb of left or right hand towards source, curl fingers to away from source, curling fingers temporal rotation of field.
[Show full text]
Microscopy DPX New Entellan® Entellan® New
Sample material 1.00579.0500 Starting materials are • formalin-fixed, paraffin-embedded, histologically stained tissue specimens 1.07960.0500 (3 - 5 µm thick paraffin sections) • fixed and stained cytological smears, e. g. sputum, fine needle aspiration biop- 1.07961.0100 sies (FNAB), rinses, imprints, effusions • air-dried, heat-fixed, and stained smears of bacteriological specimen material, e. g. liquid and solid enrichment cultures of bacteria from body fluids, exsu - 1.07961.0500 dates, pus • hematologically processed and stained blood or bone-marrow smears from all 1.00869.0500 regions of the human body. 1.01691.0025 Reagents Cat. No. 100579 DPX new 500 ml 1.01691.0100 water-free mounting medium for microscopy Cat. No. 107960 Entellan® 500 ml 1.03973.0001 rapid mounting medium for microscopy 1.09016.0100 Cat. No. 107961 Entellan® new 100 ml, 500 ml, rapid mounting medium 1 l 1.09016.0500 for microscopy Cat. No. 100869 Entellan® new for cover slipper 500 ml for microscopy Microscopy Cat. No. 101691 Canada balsam 25 ml, 100 ml for microscopy Cat. No. 103973 M-GLAS® 500 ml DPX new liquid cover glass water-free mounting medium for microscopy for microscopy Cat. No. 109016 Neo-Mount® 100-ml dropping Entellan® anhydrous mounting medium bottle, 500 ml rapid mounting medium for microscopy for microscopy Entellan® new Specifications rapid mounting medium for microscopy Cat. No. 100579 DPX new, water-free mounting medium for microscopy is a water-free mounting medium for microscopy, in which the teratogenic ingredi- Entellan® new for cover slipper ent Dibutyl phthalate (DBP) has been avoided. for microscopy Refractive index (20°C) 1.518 - 1.521 Viscosity (20°C) 600 - 700 mPa*s Canada balsam Cat.
[Show full text]
Slides to Review Hecht's Chapter on Polarization
Polarization Optics, Eugene Hecht, Chpt. 8 Electromagnetic Properties of Light 45° Linear Polarization E (z,t) = Re E exp[i(kz !!t)] x { ! 0x } E (z,t) = Re E exp[i(kz !!t)] y { ! 0 y } The complex amplitude, E0 is the same for each~ component. So the components are always in phase. Arbitrary Angle Linear Polarization E (z,t) = Re E cos(!)exp[i(kz !!t)] x { ! 0x } E (z,t) = Re E sin(!)exp[i(kz !!t)] y { ! 0 y } E-field variation Here, the y-component is in phase over time (and with the x-component, y space) but has different magnitude. α x Linear polarization • E-field magnitude oscillates • Direction fixed Time evolution • Arbitrary polarization angle – superposition of x and y polarized waves – real numbers Example 45 ° linear polarization Circular polarization • E-field magnitude constant • Direction rotates • Complex superposition of x and y polarizations – x and y in quadrature Time evolution Example: right circular polarization Elliptical polarization • General case – polarization partly linear and partly circular • E-field sweeps out ellipse – both magnitude and direction change with time • Superposition of L and R states Superposition of L and R Elliptical polarization Polarization summary • Decompose into x and y polarizations • Linear -- real superposition • Circular -- quadrature superposition Linear polarizations Circular polarizations Ey E i E +45 y E Ex Ex Right E ELeft y E-45 i Ey Ex Ex Producing linear polarization • Induce loss for one polarization direction • Examples: wire grid, polaroid filter Dichroic Materials • Wire grid polarizer absorbs light with the polarization along the length of the wires because this polarization generates a current along the length of the wires.
[Show full text]
Conduction Mechanism in Canada Balsam
International Journal of Materials Physics. ISSN 0974-309X Volume 8, Number 1 (2017), pp. 1-6 © International Research Publication House http://www.irphouse.com Conduction Mechanism in Canada Balsam Kh. Damberi Devi Department of Physics, Naorem Birahari College, Khundrakpam, Manipur, India-795 114 Abstract Conduction mechanism in canada balsam for the sample of thickness 1.5 ×10 -3 m at temperatures 323 K, 343 K and 363 K have been investigated from the plot of E1/2 versus LnJ. The value of LnJ is sharply increases up to 2.15×102 V/m but due to phase change beyond this applied field the slope of the plot decreases for all temperature. The slope beyond the critical field 2.15×102 V/m is increase with increase of temperature and shows molionic conduction. INTRODUCTION Canada balsam, is a turpentine which is made from the resin of the balsam fir tree (Abies balsamea) of boreal North America. Canada balsam is amorphous when dried and it does not crystallize with age. Since it has poor thermal and solvent resistance it is used for making permanent microscope slides. Due to its high optical quality and the similarity of its refractive index to that of crown glass (n = 1.55), purified and filtered Canada balsam was traditionally used in optics as an invisible-when- dry glue for glass, such as lens elements. Lenses glued with Canada balsam (or with other similar glues) are called cemented lenses. In modern optical manufacturing, UV- cured epoxies are often used to bond lens elements. In recent years, there has been a great deal of interest in the study of liquid dielectrics, because of their application in electrical insulation engineering [1].
[Show full text]