DOCSLIB.ORG

Butterfly Valves 3, 4 B 1 B

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Butterfly Valves 3, 4 B 1 B ® VALVES AND FITTINGS PRODUCT CATALOG SZ-105 002-10/1/2019 ZSPEC® Flow Control is a top-quality valves and fittings supplier serving the oilfield, industrial, marine and agricultural industries. Based out of Houston, Texas, ZSPEC® supplies top-quality valves and fittings to distributors throughout the United States. We are guided by a singular determination to do whatever it takes to be a reliable supplier for our customers with our ready-to-ship inventory. You can learn more about our ZSPEC® product offerings in the corresponding product catalogue and at our website, www.zspec.com. 4 3 2 1 ITEM NO. QTY. DESCRIPTION 1 1 TEE BODY, 2"1502 FMM STD 15M 2 2 WING NUT, 2"1502 STD 15M D D 3 2 NUT RETAINER SET, 2"1502 4 1 SEAL, 2"1502 STD (BUNA) 5 2 RETAINER RING, 2"1502 4 3 2 1 2 ITEM NO. QTY. DESCRIPTION 1 1 TEE BODY, 2"1502 FMM STD 15M 3 2 2 WING NUT, 2"1502 STD 15M D D 3 2 NUT RETAINER SET, 2"1502 5 4 1 SEAL, 2"1502 STD (BUNA) 5 2 RETAINER RING, 2"1502 C 2 C 3 4 1 " 7 5 C C 4 1 " TABLE OF CONTENTS 7 " 5 7 . BUTTERFLY VALVES 3, 4 B 1 B BALL VALVES 4, 5 " 5 CHECK VALVES 6 7 . B 1 GATE VALVES 7 B 4 NEEDLE VALVES 73 2 1 DESCRIPTION ITEM NO. QTY. DESCRIPTION 5" 7" EXPANSION JOINTSTEE, 7 1 1 ELBOW BODY, 2"1502 FM STD 15M 2"1502 FMM STD 15M SEAMLESS NIPPLES 7 2 1 WING NUT, 2"1502 STD 15M D MATERIAL /DHEESCARTIPTTRIOENAT DRAWN BY D A 7100 Business Park Drive Suite 180 A 5" 7" TEE, HPJ Houston3TX 77041 1 NUT RETAINER SET, 2"1502 SWAGE NIPPLESSTAND8A2R"1D50S2EFMRMVISCTED 15M DATE 15,000 PSI CWP 03/11/18 4 1 SEAL, 2"1502 STD (BUNA) MATERIAL / HEAT TREAT DRAWN BY A WEIGHT PART NUMBER 7100 Business Park Drive Suite 18R0 EVA BOLTED SLEEVE COUPLINGS 8 SHEET HPJ Houston TX 757041 1 RETAINER RING, 2"1502 STANDARD SERVICE 52 lbs SHEET4 1 OF 1 DTA2TEFMM 0 15,000 PSI CWP 03/11/18 4 3 BULLDOG TANK UNIONS2 8WEIGHT SHEET PART NUMBER 1 REV 52 lbs S1HEET 1 OF 1 T2FMM 0 4 3 HAMMER UNIONS 92 1 SWIVEL JOINTS 10 2 PUP JOINTS 10 3 C " C 5 CROSSOVERS 10, 11 5 PLUG VALVES 11 CHOKES 12 " 5 7 . INTEGRAL FITTINGS 12 1 MANIFOLDS 12 B B 7" DESCRIPTION ELBOW, 2"1502 FM STD 15M MATERIAL / HEAT TREAT DRAWN BY 7100 Business Park Drive Suite 180 A HPJ Houston TX 77041 A STANDARD SERVICE DATE 15,000 PSI CWP 03/11/18 WEIGHT SHEET PART NUMBER REV 48 lbs SHEET 1 OF 1 DCE2FM 0 4 3 2 1 BUTTERFLY VALVES BW Series Butterfly Valve BL Series Butterfly Valve Wafer Style w/ Guide Holes, Long Lug Style Valve, Long Neck Design Neck Design 200 PSI NSCWP 200 PSI NSCWP Sizes: 2” thru 20” Sizes: 2” thru 20” (larger diameters are available) (larger diameters are available) RL Series Butterfly Valve RRW Series Butterfly Valve Lug Style Valve, 2-pc Stem Design Round Wafer Style, Long Neck Design 200 PSI NSCWP 200 PSI NSCWP Sizes: 2” thru 12” Sizes: 2” thru 12” RNW Series w/ Square Stem RNW Series Butterfly Valve Notched Body Wafer Style, Short Notched Body Wafer Style, Short Neck Design, Square Stem Neck Design 200 PSI NSCWP 200 PSI NSCWP Sizes: 2” thru 12” Sizes: 2” thru 12” RNW Teflon Series Butterfly Valve G Series Grooved End Butterfly Valve Notched Body Wafer Style, Short 200 PSI NSCWP Neck Design Sizes: 2” thru 12” 150 PSI NSCWP Sizes: 2”, 3”, 4”, 6” Handle for Butterfly Valves RNW6BT Series Butterfly Valve All butterfly Valves come standard 6 Bolt Notched Body Wafer Style, with handles, however spare handles Short Neck Design, Square Stem may be purchased. 200 PSI NSCWP They are available for DD and Square Sizes: 3”, 4”, 5” stemmed valves. T Series Threaded End Butterfly Valve Stem Extension for Butterfly Valves 200 PSI NSCWP Stem Extensions are available for all Butterfly Sizes: 2”, 3”, 4”, 6” Valves. Standard lengths are 2 ft and 4 ft. 3 4 BUTTERFLY VALVES Gear Op for Butterfly Valves Pneumatic Actuators Gear Operators are available for all Direct Mount Pneumatic Actuators butterfly valves. are available for all butterfly valves 2” thru 12”. BALL VALVES BBV Series Brass Ball Valve BBVH Series Heavy Duty Brass Ball Full Port, FNPT Ends, Locking Device Valve Handle Heavy Weight Body, Full Port, FNPT 600 PSI NSCWP Ends, Locking Device Handle Sizes: 1/4” thru 4” 600 PSI NWCWP Sizes: 1”, 2”, 2-1/2”, 3”, 4” 1000 Series Oilfield Ball Valve 1500 Series Oilfield Ball Valve NACE MR0175, FNPT Ends, Locking NACE MR0175, FNPT Ends, Locking Device Handle Device Handle 1000 PSI NSCWP 1500 PSI NSCWP Sizes: 1” FP, 2” RP, 2” FP, 3” RP, Sizes: 1” FP, 2” RP 3” FP, 4” RP 2000 Series Oilfield Ball Valve 3000 Series Oilfield Ball Valve NACE MR0175, FNPT Ends, Locking NACE MR0175, FNPT Ends, Locking Device Handle Device Handle 2000 PSI NSCWP 3000 PSI NSCWP Sizes: 1” FP, 2” RP, 2” FP, 2-1/2” FP, Sizes: 1” FP, 2” RP, 2” FP, 2-1/2” FP, 3” RP, 3” FP, 4” RP, 4” FP 3” FP, 4” FP 3600 Series Oilfield Ball Valve 5000 Series Oilfield Ball Valve NACE MR0175, EUE 8Rnd Ends, Lock- NACE MR0175, FNPT Ends, Locking ing Device Handle Device Handle 3600 PSI NSCWP 5000 PSI NSCWP Sizes: 2-3/8, 2-7/8 Sizes: 1” FP, 2” RP, 2” FP, 2-1/2” FP, 3” FP 3 4 BALL VALVES BS2K Series Barstock Ball Valve BS2K-L Series Barstock Ball Valve NACE MR0175, B16.34 Design, FNPT NACE MR0175, B16.34 Design, FNPT Ends, Standard Non Locking Handle Ends, Locking Device Handle 2000 PSI NSCWP 2000 PSI NSCWP Sizes: 1/4” thru 2” Sizes: 1/4” thru 2” CS2K Series Seal Welded WCB CS1K Series Seal Welded WCB Ball Valve Ball Valve NACE MR0175, Full Port, FNPT Ends, NACE MR0175, Full Port, FNPT Ends, Locking Device Handle Locking Device Handle 2000 PSI NSCWP 1000 PSI NSCWP Sizes: 1/4” thru 2” Sizes: 2-1/2”, 3”, 4” SS2K Series Seal Welded CF8M SS1K Series Seal Welded CF8M Ball Valve Ball Valve NACE MR0175, Full Port, FNPT Ends, NACE MR0175, Full Port, FNPT Ends, Locking Device Handle Locking Device Handle 2000 PSI NSCWP 1000 PSI NSCWP Sizes: 1/4” thru 2” Sizes: 2-1/2”, 3”, 4” SSR1K Series Reduced Port CF8M BVICS Series WCB Isolator Ball Valve Ball Valve Reduced Port, FNPT Ends, Locking NACE MR0175, Full Port, Locking Device Handle Device Handles 1000 PSI NSCWP 1”: 2000 PSI NSCWP, 2”: 1500 PSI Sizes: 1/4” thru 2” NSCWP BVISS Series CF8M Isolator Ball Valve CS6K Series WCB Seal Welded Ball Valve NACE MR0175, Full Port, Locking NACE MR0175, Firesafe to API607, Device Handles B16.34, Full Port up to 1-1/2” size, 1”: 2000 PSI NSCWP, FNPT Ends, Locking Device Handle 2”: 1500 PSI NSCWP 6000 PSI NSCWP Sizes: 1/4” thru 2” SS6K Series CF8M Seal Welded Ball Valve NACE MR0175, Firesafe to API607, B16.34, Full Port up to 1-1/2” size, FNPT Ends, Locking Device Handle 6000 PSI NSCWP Sizes: 1/4” thru 2” 5 6 CHECK VALVES BCV Series 200 PSI Brass Check Valve BCVR Series 300 PSI Brass Oring Style Check Valve FNPT Ends 200 PSI NSCWP FNPT Ends, Clapper Oring Sizes: 3/8” thru 4” 300 PSI NSCWP Sizes: 1”, 2”, 3”, 4” BCVRG Series 300 PSI Grooved End D Series Ductile Iron Swing Check Brass Oring Style Check Valve Valve Grooved Ends, Clapper Oring NACE MR0175, FNPT Ends 300 PSI NSCWP Available Pressures: 300, 600, 1000, Sizes: 2”, 3”, 4” 1500 and 2000 PSI NSCWP Sizes: 1”, 2”, 2-1/2”, 3”, 4” C Series WCB Swing Check Valve ICV Series 316SS Inline Check Valve NACE MR0175, FNPT Ends MNPT x FNPT Ends Available Pressures: 3000 and 5000 Viton O Ring PSI NSCWP 6000 PSI NSCWP Sizes: 1”, 2”, 3” Sizes: 1/8”, 1/4”, 1/2”, 3/4”, 1” 1000# CF8M Swing Check Valve 1000# CF8M Swing Check Valve FNPT Ends 1000 PSI NSCWP Sizes: 1/2” thru 2” 5 6 GATE VALVES BGV Series Brass Gate Valve QL Series Quick Lever FNPT Ends Brass Gate Valve FNPT Ends 200 PSI NSCWP Sizes: 2”, 3”, 4”, 6” Sizes: 3/8” thru 4” NEEDLE VALVES NV Series Needle Valve Types: Standard or Mini Configurations: FNPT x FNPT or MNPT x FNPT Pressures: 6000 PSI NSCWP or 10000 PSI NSCWP Materials: A105 or 316 SS Sizes: 1/4”, 1/2”, 3/4”, 1” EXPANSION JOINTS Style 101 150# Expansion Joint Nitrile with Neoprene Cover 225 PSI NSCWP Sizes: 2” thru 12” SEAMLESS NIPPLES S80 and XXH A106 Seamless Nipples Diameters: 1/4” thru 6” Lengths: CL thru 12” 7 8 SWAGE NIPPLES A106B Swage Nipples Diameters: 2” thru 10” STD, XH, XXH BOLTED SLEEVE COUPLINGS Bolted Sleeve Coupling Spare Parts for Bolted Sleeve Couplings Diameters: 1” thru 16” Bolts: 5/8 x 8, 5/8 x 11, 5/8 x 15, Lengths: 5”, 7”, 12”, 16” 24” 5/8 x 19, 5/8 x 27 Gaskets: 1” thru 16” available in Nitrile Rubber BULLDOG TANK UNIONS ZSPEC® is an authorized distributor of Bulldog Tank Unions Air Grip Unions Mud Tank Unions Sizes: 4” thru 16” Sizes: 3” thru 16” Frac Tank Unions Sizes: 8” Male Socket Weld Sub with Nut Frac Nipple Frac Plug Sizes: 8” Sizes: 8” 7 8 HAMMER UNIONS ZSPEC® Hammer Unions are manufactured from high quality forgings and castings.
Load more

Recommended publications
  • ERHARD Needle Valves Needle Valves – for Safe and Exact Control
    ERHARD is a company of ERHARD needle valves Needle valves – for safe and exact control Needle valves are the suitable valve to use whenever pressure heads or flow rates need to be safely and reliably reduced and controlled. They are used for two main tasks: • By restricting the cross-section, a change in flow rate, flow velocity and pressure is forced, which results to higher stress in the valve. The valve must therefore be designed so that potential cavitation cannot cause any damage whatsoever. • To be able to control the pressure and flow precisely and finely, the control valve’s control characteristics must be as linear as possible over the whole opening range. Thanks to their well thought out design, ERHARD needle valves fulfil these requirements to the greatest possible degree and are therefore the ideal valve for numerous control tasks. Because even if butterfly valves and gate valves All the components of the ERHARD RKV are used for such tasks in individual cases in practice, due to their design as needle valves are designed on the basis of an optimum shut-off device for “OPEN/CLOSED” operation, but they are not decades of experience. At the same time, suitable for continuous use as a control valve. state of the art techniques are used in the development, e. g. the finite elements methods (FEM). It visualises the stress New challenges ... curve in the whole component – here in The production and operation of control valves requires sophisticated know- the gearbox crank of a needle valve – and how, to enable the differentiated requirements to be fulfilled: colours it according to the existing stress: • International standards, approvals and test regulations set the highest quality blue stands for low stresses, orange requirements.
    [Show full text]
  • 1 and Butterfly Valves
    PIPING INSTRUMENTS-II Introduction Valves are used to isolate equipment and piping devices, regulate flow, prevent backflow, regulate and relieve pressure. They are critical components of piping systems so that they must be properly located, oriented and configured. Valves operated frequently need careful consideration. There are several kinds of valves: isolation, regulating and safety valves. Isolation valves are used to turn on or turn off fluid flow. Examples are gate, ball, and plug valves; the gate valve is probably the most popular. Knife valves are similar to gate valves but occupy smaller space, weigh less and cost less. Regulating valves are used to control flow direction, rate and pressure. Flow rate valves include globe, butterfly, needle and diaphram. The globe valve is very popular and may be found in lines up to 12” diameter. It has a relatively high pressure drop. The butterfly valve is good for low-pressure lines and offer minimum pressure drop. The needle valve has a needle-like stem with fine threads that allows it to be used for accurate throttling. The diaphram valve is common in the food and beverage industries. Pressure control valves are more often called pressure regulators. Check valves e.g. lift or swing valves prevent back flows and thus protect upstream equipment and personnel. Safety valves are used to limit operating pressures and temperatures. They open at set pressure or temperature values and prevent damage to equipment and personnel. Examples are pop and relief valves. Pop valves are used for air, gas, and steam lines and open at set values. Relief valves are used for liquids and open and close more slowly.
    [Show full text]
  • TECHNICAL DATA CONTROL ASSEMBLY (Maximum 250 PSI WWP)
    July 23, 2001 533 a MODEL A-1 SPEED TECHNICAL DATA CONTROL ASSEMBLY (Maximum 250 PSI WWP) 1. PRODUCT NAME Water Working Pressure Rating: VIKING MODEL A-1 For use up to 250 PSIG (1 724 SPEED CONTROL ASSEMBLY kPa) Part No. 08780 Galvanized Factory Assembled Part No. 11181 Brass Shipping Weight: Approximately 6.8 Part No. 11192 Stainless Steel lbs (3,1 kg) For use with Viking Deluge Valves Material Specifications: Refer to and Flow Control Valves Chart in Figure 2 2. MANUFACTURED 5. OPERATION (Refer to Figure 2.) THE VIKING CORPORATION 210 N. Industrial Park Road The Viking Model A-1 Speed Con- Hastings, MI 49058 U.S.A. trol Assembly consists of a Telephone: (616) 945-9501 pre-assembled galvanized or brass (877) 384-5464 pipe loop for installation between Fax: (616) 945-9599 the priming chamber and trim of the e-mail: [email protected] Viking Deluge or Flow Control Valve used. 3. PRODUCT DESCRIPTION One leg of the loop is equipped with The Viking Speed Control Assembly a check valve to allow flow into the provides adjustment of the opening priming chamber only. The other leg speed of Viking Deluge Valves, and is equipped with a check valve that adjustment of both the opening and only allows flow out of the priming closing speed of Viking Flow Control chamber. Valves. Water hammer, which may Speed Control Assembly result from the opening of a Deluge Both legs are equipped with a spe- Figure 1 Valve or opening and closing of a cial needle valve to adjust flow into Flow Control Valve, may be reduced or out of the priming chamber.
    [Show full text]
  • Matching Valve Type to Function: a Tutorial in Valve Selection
    Keywords: ฀฀฀฀฀฀฀฀฀฀฀ V A LV E T ECHNOLOGIES Matching valve type to function: A tutorial in valve selection When selecting a valve for an instrumentation system, your choices may seem On-Off Valves overwhelming. Just to name On-off control is the most basic valve a few, there are ball valves, function. Valves in this category stop and diaphragm and bellows valves, -'!"%-"#!0!"'/#Z#).7#Z# 6;#>-./%-0# +3 as well as check valves, excess off valves are ball, gate, diaphragm, and fl ow valves, fi ne metering, bellows valves. Perhaps the most common of all valve gate, multi-port, needle, types, ball valves (see Figure 1) are plug, relief, rising plug, and designed for on-off control. Quarter turn safety valves. Furthermore, %1")%". +#!"%-"!# -#!" ,!#Z# 6#?0#, !.". +.+:# each of these valves comes %#/'"%&&.1#?%&&#.+#%#!"-%.:9"3"9- ):9#Z# 6# in many sizes, confi gurations, path. The ball has a large hole through the materials of construction, and centre of it. When the hole is lined up with Fig. 1 Ball valves are ideal for on-off control. Quarter actuation modes. To make the "9'#Z# 6#,%"94#."#'+%?&'!#Z# 6;#@9'+#."#.!# !"#$%& !% '(#$) %" )$("$) (*)$Z$(,$-.$*()' '(#'#/$%$ 01 %22'&$-%22$'#$%$) "%'/3 4 3"(!/3$Z$(,$*% 35 best choice, it is always good ")-+'7#AB#7':-''!#(- /#"9'#Z# 6#,%"94# ."#!" ,!#Z# 6;#<(#0 )#%-'#!''=.+:#%+# +3 ((# practice to ask the fi rst question $%&$'#6."9#C).1=#!9)" ((#%+7#9.:9#Z# 6# in valve selection: What do I capacity, then a ball valve is a good choice. material, e.g., gaskets and O-rings, normally want the valve to do? The position of the handle provides a quick found around the stem in other valves.
    [Show full text]
  • Basic Concepts of Valves
    Basic Concepts of Valves Basic Concepts of Valves What is a Valve? A valve is a mechanical device which regulates either the flow or the pressure of the fluid. Its function can be stopping or starting the flow, controlling flow rate, diverting flow, preventing back flow, controlling pressure, or relieving pressure. Basically, the valve is an assembly of a body with connection to the pipe and some elements with a sealing functionality that are operated by an actuator. The valve can be also complemented whit several devices such as positioners, transductors, pressure regulators, etc. Different types of Valves are available: gate, globe, plug, ball, butterfly, check, diaphragm, pinch, pressure relief, and control Valves. Each of these types has a number of models, each with different features and functional capabilities. Some Valves are self-operated while others manually or with an actuator or pneumatic or hydraulic is operated. What are the main Functions from Valves?: • Stopping and starting flow • Reduce or increase a flow • Controlling the direction of flow • Regulating a flow or process pressure • Relieve a pipe system of a certain pressure Classification of Valves The following are some of the commonly used Valve classifications, based on mechanical motion: • Linear Motion Valves. The Valves in which the closure member, as in gate, globe, diaphragm, pinch, and lift Check Valves, moves in a straight line to allow, stop, or throttle the flow. • Rotary Motion Valves. When the Valve-closure member travels along an angular or circular path, as in butterfly, ball, plug, eccentric- and Swing Check Valves, the Valves are called rotary motion Valves.
    [Show full text]
  • Kelly Pipe Catalog Index
    VALVES The purpose of a valve is to stop or control the flow of material through a piping system. Valves are manufactured in various configurations. Practically any type of end connection is available. GATE VALVE As the name implies this particular valve has a gate that moves perpendicular GATE to flow of the service. In the up position it is VALVE open. In the down position it is closed. CAST The flow is straight through so it does not lend itself for use as a metering valve. The gate valve is used mainly as an on-and-off valve. Gate valves are furnished in screwed, socket weld, screwed by socket weld, raised face flange, flat face flange, RTJ face and butt weld end connections. GATE Gate valve extras include: VALVE 1. Split, Flex or Solid Wedge FORGED 2. Stellite Seat & Disc 3. Rising or Non-Rising Stem GLOBE VALVE In the globe valve, the flow pattern is offset and not a straight through flow. This design affords a better closure than a gate valve and can be used for metering. All end connections previously mentioned in this manual are available. GLOBE VALVE Valves are supplied in a wide variety of CAST materials. Smaller sizes: NPS 2 and under, are manufactured in both forged and cast material. Above NPS 2 are generally in cast material. TRIM Trim refers to stem, seat and disc in Gate Valves and Disc Plug in Globe Valves. GLOBE VALVE A variety of trims can be used on the FORGED seat, stem, or disc. 11% to 13% chrome (F6 410SS) is accepted as standard on most types of valves.
    [Show full text]
  • Flow Control and Needle Valves
    FLOW CONTROL VALVES 60 Flow Controls Flow vs. Needle Turns MFC-2/MFC-2-M5 MFC-3/BFC-3 50 JFC-2 JFC-3 40 JFC-4 JFC-5 30 SCFM @ 100 psig 20 Clippard offers five models of adjustable flow con- 10 trols with #10-32 through 3/8” NPT ports. They feature a combination needle and check valve that controls flow in one direction and allows 0 free flow in the opposite direction. 0 1 234 5 678 9 10 They are an ideal valve for use with a cylinder, NUMBER OF TURNS providing a slow extend stroke while allowing a fast retract stroke. The chart on this page illustrates the flow versus the number of needle adjustments turns for the MFC-2, MFC-2-M5, MFC-3, BFC-3, JFC-2, JFC-3, JFC-4 and JFC-5. Medium: Air, Water or Oil Adjustable Flow Control Valve Materials: Brass body and stainless steel needle; Buna-N seals 0.734 (18.6) Input Pressure: 300 psig max. Air Flow: 4 SCFM max. @ 50 psig; 7 SCFM max. @ 100 psig Pressure To Open: Cracks at approx. 2 psig 0.281 0.421 (7.1) (10.7) 0.562 Mounting: Inline 0.718 (14.3) (18.2) Flow Direction: Arrow in valve body shows direction of controlled flow 1 (25.4) 0.156 (4.0) 2 1 #10-32 (M5) outlet 2 0.312 Adjustment: Knurled knob on needle shaft #10-32 (M5) inlet 1 (7.9) Part No. Description MFC-2 . .Adjustable Flow Control Valve, #10-32 MFC-2-M5 .
    [Show full text]
  • Valve Selection for Instrumentation
    Valve Selection for Instrumentation Doug Nordstrom Valve Product Manager Sarah Liston Valve Engineering Manager © 2014 Swagelok Company. Swagelok confidential. For internal use only Agenda • Considerations in Valve Selection • Overview and Attributes of different Valve Types – Ball – Plug – Needle – Diaphragm • Design features that impact valve performance – Ball – Needle © 2011 Swagelok Company – Confidential – For Internal Use Only Ball Valves © 2009 Swagelok Company Plug Valves © 2009 Swagelok Company Needle Valves © 2009 Swagelok Company Diaphragm Valves © 2009 Swagelok Company Typical Factors to Consider… 1. Seal integrity 2. Flow capacity and control 3. Actuation 4. Temperature limits 5. Chemical compatibility 6. Cost How do various instrumentation valves stack up with these factors? © 2009 Swagelok Company Typical Factors to Consider… 1. Seal integrity © 2009 Swagelok Company Typical Factors to Consider… 1. Seal integrity Two locations of leaks • Seat leaks • Shell (or Stem) leaks © 2009 Swagelok Company Typical Factors to Consider… 1. Seal integrity Three “types” of leaks • Surface finish leaks (path leak) • Scratches (path leak) • Permeation Helium Helium Gas Gas To HLT To HLT “path” leak “permeation” leak “Path Leak” “Permeation Leak” © 2009 Swagelok Company Permeation Response 1.E-06 PTFE (t=0.077cm) PEEK (t=0.043cm) 1.E-07 Zenite -6000L-N (3 pcs) (t=0.041, t=0.043, t=0.042 cm) 1.E-08 1.E-09 Permeation Rate (atm cc/s) (atm Rate Permeation 1.E-10 Permeation area = 0.47 cm2 1.2 atm He pressure applied 1.E-11 0 100 200 300 400 500 600 700 800 900 1000 Time (s) Permeation Leaks Short time behavior D = diffusion coefficient P A ∞ − D n2 π 2 t S = solubility constant Leak rate= D S He 1+ 2 cos(nπ ) exp A = permeation area ∑ 2 P = helium partial pressure L n=1 L He L = diffusion length (thickness) Big effect 1.E-06 L=.013 .020” 1.E-07 .029” .036” 1.E-08 1.E-09 Leak Rate (std cc/s) (std Rate Leak 1.E-10 1.E-11 0 30 60 90 120 150 180 210 240 270 300 Time (s) Bubbles vs.
    [Show full text]
  • Fundamentals of Valves Course# ME201
    Fundamentals Of Valves Course# ME201 EZ-pdh.com Ezekiel Enterprises, LLC 301 Mission Dr. Unit 571 New Smyrna Beach, FL 32128 386-882-EZCE(3923) [email protected] Ezekiel Enterprises, LLC DOE-HDBK-1018/2-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK MECHANICAL SCIENCE Volume 2 of 2 U.S. Department of Energy FSC-6910 Washington, D.C. 20585 Distribution Statement A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information. P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal., Springfield, VA 22161. Order No. DE93012226 DOE-HDBK-1018/2-93 MECHANICAL SCIENCE ABSTRACT The Mechanical Science Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mechanical components and mechanical science. The handbook includes information on diesel engines, heat exchangers, pumps, valves, and miscellaneous mechanical components. This information will provide personnel with a foundation for understanding the construction and operation of mechanical components that are associated with various DOE nuclear facility operations and maintenance. Key Words: Training Material, Diesel Engine, Heat Exchangers, Pumps, Valves Rev. 0 ME DOE-HDBK-1018/2-93 MECHANICAL SCIENCE FOREWORD The Department of Energy (DOE) Fundamentals Handbooks consist of ten academic subjects, which include Mathematics; Classical Physics; Thermodynamics, Heat Transfer, and Fluid Flow; Instrumentation and Control; Electrical Science; Material Science; Mechanical Science; Chemistry; Engineering Symbology, Prints, and Drawings; and Nuclear Physics and Reactor Theory.
    [Show full text]
  • A Guide to Types of Valves
    A Guide to Types of Valves Introduction A Valve is a device that regulates the flow of gases, liquids or loose materials through an aperture, such as a pipe, by opening, closing or obstructing a port or passageway. A valve controls system or process fluid flow and pressure by performing any of the following functions: Stopping and starting fluid flow Varying (throttling) the amount of fluid flow Controlling the direction of fluid flow Regulating downstream system or process pressure Relieving component or piping over pressure There are many valve designs and types that satisfy one or more of the functions identified above. A multitude of valve types and designs safely accommodate a wide variety of industrial applications. Introduction to the Types of Valves Because of the diversity of the types of systems, fluids, and environments in which valves must operate, a vast array of valve types have been developed. Examples of the common types are the ball valve, butterfly valve, globe valve, gate valve, plug valve, diaphragm valve, reducing valve, needle vave, check valve and safety/relief valve. Each type of valve has been designed to meet specific needs. Some valves are capable of throttling flow, other valve types can only stop flow, others work well in corrosive systems, and others handle high pressure fluids. Each valve type has certain inherent advantages and disadvantages. Understanding these differences and how they affect the valve's application or operation is necessary for the successful operation of a facility. Although all valves have the same basic components and function to control flow in some fashion, the method of controlling the flow can vary dramatically.
    [Show full text]