Entrained Air As a Rheology Modifying Agent for 3D Printed Concrete

Total Page:16

File Type:pdf, Size:1020Kb

Entrained Air As a Rheology Modifying Agent for 3D Printed Concrete PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE ESCUELA DE INGENIERIA ENTRAINED AIR AS A RHEOLOGY MODIFYING AGENT FOR 3D PRINTED CONCRETE CLAUDIA EUGENIN SOTO Thesis submitted to the Office of Research and Graduate Studies in partial fulfillment of the requirements for the Degree of Master of Science in Engineering Advisors: MAURICIO LOPEZ CASANOVA WERNHER BREVIS VERGARA Santiago de Chile, December 2020 © MMXX, Claudia Andrea Eugenin Soto PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE ESCUELA DE INGENIERIA ENTRAINED AIR AS A RHEOLOGY MODIFYING AGENT FOR 3D PRINTED CONCRETE CLAUDIA EUGENIN SOTO Members of the Committee: MAURICIO LÓPEZ CASANOVA WERNHER BREVIS VERGARA ÁLVARO GONZÁLEZ VACCAREZZA TOMÁS VIVANCO LARRAÍN RODRIGO ESCOBAR MORAGAS Thesis submitted to the Office of Research and Graduate Studies in partial fulfillment of the requirements for the Degree of Master of Science in Engineering Santiago de Chile, December 2020 To the women who have silently paved the road for us in STEM and to those who will continue doing it ACKNOWLEDGEMENTS This thesis is dedicated to my family: my parents Jorge Eugenin and Claudia Soto for their unfaltering support and encouragement, and the rest of my household Jorge, Josefa, Joaquin, Ignacia, Pablo and Gaby, for their patient companionship during all these years. I would like to thank professor Mauricio López for his support not only in my research but for his teachings on life, and professor Wernher Brevis for his support and encouragement in an area of knowledge unknown to me. This work would also not have been possible without the support of my friend and colleague, Iván Navarrete, who patiently helped me whenever he could. I would also like to thank my friends from the office and especially those in “Tesis en Cuarentena”, for their understanding, assistance and support: Aldo, Matías, Jeison, Alex, Tomás, Karla, José Luis, Alejandro, Juan Cristóbal, Fabián, Camilo, Nibaldo, Natalia, Claudia, Leonardo. The office was always a great place to work thanks to the welcoming Edith and William, as well as the warm presence of Pilar, Selma, Claudio, Ximena and Marcela. I would also like to acknowledge the members of the research group for their assistance: Felipe, José Carlos, Mauricio, Pedro and the team from the laboratory, Luis and Sthefanie. I would like to thank Fabrice Toussaint and Hélène Lombois-Burger for their welcome at LafargeHolcim during my internship in France. Much of what was learned from that experience contributed to this thesis. This work would not have been possible without the support of my friends Ivania Yovanovic and Anita Bernal every step of the way, as well as the support of Arantxa Ereche and Trinidad Mesías. Finally, for his unfaltering support and patience even at a distance, merci beaucoup Hugo Poiblanc. ii TABLE OF CONTENTS Page DEDICATION ............................................................................................................. ii ACKNOWLEDGEMENTS ......................................................................................... ii TABLE OF CONTENTS ............................................................................................ iii LIST OF FIGURES ..................................................................................................... vi LIST OF TABLES ....................................................................................................... x NOMENCLATURE AND ABBREVIATIONS ........................................................ xii ABSTRACT ............................................................................................................... xv RESUMEN ................................................................................................................ xvi 1. STRUCTURE OF THESIS ................................................................................ 1 2. INTRODUCTION .............................................................................................. 2 2.1. 3DCP as a sustainable construction solution ............................................... 3 2.2. State of the art of 3DCP ............................................................................... 5 2.3. Challenges of 3DCP..................................................................................... 9 3. SUMMARY OF CONDUCTED WORK ......................................................... 12 3.1. Research gap .............................................................................................. 12 3.2. Hypothesis ................................................................................................ 12 3.3. Objectives ................................................................................................. 12 3.3.1 General objective ............................................................................. 12 3.3.2 Specific objectives ......................................................................... 12 3.4. Methodology ............................................................................................ 13 4. AIR BUBBLES AS AN ADMIXTURE FOR PRINTABLE CONCRETE - A REVIEW OF THE RHEOLOGICAL EFFECT OF ENTRAINED AIR ......... 15 4.1. Abstract ...................................................................................................... 15 4.2. Introduction ................................................................................................ 16 4.3. Material requirements for 3DCP................................................................ 19 4.3.1. Definition of printability ................................................................ 19 4.3.2. Relevant rheological concepts ........................................................ 21 4.3.3. A review of structural build-up and its mechanisms ...................... 23 4.4. Obtaining a printable mixture .................................................................... 27 4.4.1. Measuring printability .................................................................... 27 4.4.2. Successful printable mixtures ......................................................... 31 4.5. Effect of entrained air on rheological properties ....................................... 37 4.5.1. Air entrained yield stress fluids ...................................................... 37 4.5.2. Air entrained concrete .................................................................... 42 4.5.3. Types of air entraining agent .......................................................... 49 4.6. Effect of AEA on printability .................................................................... 53 4.7. Further research & conclusions ................................................................. 53 5. EXPERIMENTAL FINDINGS ........................................................................ 56 5.1. Air volume fraction assessment for air-entrained mortar .......................... 56 5.1.1. Materials and methods ................................................................... 56 5.1.2. Results ............................................................................................ 59 5.2. Rheological assessment of air-entrained cement paste .............................. 66 5.2.1. Materials and methods ................................................................... 66 5.2.2. Experimental results ....................................................................... 68 5.3. Empirical and rheological tests for air-entrained mortar ........................... 74 5.3.1. Materials and methods ................................................................... 74 5.3.2. Mini-slump test .............................................................................. 76 5.3.3. Shear vane test ................................................................................ 77 5.3.4. Penetrometry .................................................................................. 80 5.4. Relations found between experiments and conclusions ............................ 84 5.4.1. Static yield stress comparison between air entrained cement paste and air entrained mortar ............................................................................. 84 5.4.2. Conclusions .................................................................................... 88 6. MODEL EVALUATION IN THE CONTEXT OF AIR-ENTRAINED CEMENT PASTE .............................................................................................................. 90 6.1. Theoretical framework ............................................................................... 90 6.1.1. Rheological models for concrete .................................................... 90 6.1.2. Proposed models for air-entrained cement paste ............................ 92 6.1.3. Parameters for 3DCP ...................................................................... 96 6.2. Experimental data found in literature ........................................................ 97 6.2.1. Static yield stress results versus rheological models ...................... 99 6.2.2. Plastic viscosity results versus rheological models ...................... 102 6.3. Conclusions .............................................................................................. 105 7. CONCLUSIONS & FURTHER RESEARCH ............................................... 106 7.1. General conclusions ................................................................................. 106 7.2. Further research ....................................................................................... 107 REFERENCES ........................................................................................................
Recommended publications
  • Calculating the Compressive Strength of Concrete Structures Using Effects of Freeze-Thaw Cycles on Electrical Resistivity
    Research Article iMedPub Journals Global Environment, Health & Safety 2018 www.imedpub.com Vol.2 No.1: 6 Calculating the Compressive Strength of Concrete Structures Using Effects of Freeze-Thaw Cycles on Electrical Resistivity Soroosh Sobhkhiz1*, Mohammad Hossein Eftekhar2 and Mohammad Shekarchi Zadeh2 1School of Civil Engineering, College of Engineering, University of Tehran, Iran 2Institute of Construction Materials, University of Tehran, Tehran, Iran *Corresponding author: Soroosh Sobhkhiz, School of Civil Engineering, College of Engineering, University of Tehran, Iran, Tel: +989128996097; E-mail: [email protected] Received date: April 06, 2018; Accepted date: May 20, 2018; Published date: May 30, 2018 Copyright: © 2018 Sobhkhiz S, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Citation: Sobhkhiz S, Eftekhar MH, Zadeh MS (2018) Calculating the Compressive Strength of Concrete Structures Using Effects of Freeze-Thaw Cycles on Electrical Resistivity. Glob Environ Health Saf. Vol. 2 No. 1: 6. human beings, while they are constantly exposed to harms caused by the environment. Sustainable development involves Abstract meeting present needs without compromising the ability of future generations to meet their needs [2]. The ecological Traditionally, one of the influential parameters in criteria for sustainable development are the preservation of concrete structures sustainability has been the number of biodiversity and adoption of human activities to the natural freeze-thaw cycles over the life period of concrete resources and tolerance of nature [3]. structures. Since some regions in the world have highly variable climates, freeze-thaw cycles are one of the most Fatigue-induced damages are one of the main contributor important factors that decreases the lifetime service of factors in structural components failure [4-6].
    [Show full text]
  • Mechanical Properties of Circular Nano-Silica Concrete Filled Stainless Steel Tube Stub Columns After Being
    Nanotechnol Rev 2019; 8:600–618 Research Article Qingjie Lin, Yu Chen*, and Chao Liu Mechanical properties of circular nano-silica concrete filled stainless steel tube stub columns after being exposed to freezing and thawing https://doi.org/10.1515/ntrev-2019-0053 Received Dec 04, 2019; accepted Dec 20, 2019 Nomenclature Abstract: Experimental research on circular nano-silica f c Nano-silica concrete strength concrete filled stainless steel tube (C-CFSST) stub columns C-CFSST Circular nano-silica concrete-filled stainless after being exposed to freezing and thawing is carried steel tube out in this paper. All of forty specimens were tested in Es Elastic modulus of steel this paper, including nine C-CFSST specimens at normal D Outside diameter of circular stainless steel tube temperature, 28 short columns of C-CFSST for freeze-thaw H Height of the column treatment and three circular hollow stainless steel stub N Number of freezing and thawing cycles columns. The failure mode, load-displacement curves, Nu Ultimate strength of specimens load-strain curves and load-bearing capacity were ob- Neu Experimental ultimate load-bearing capacity tained and analyzed in this paper. The main parame- Nau Ultimate strength of C-CFSST stub columns without ters explored in the test include the number of freeze- being exposed to freezing and thawing thaw cycles (N=0, N=50, N=75, and N=100), wall thick- Ncu Calculated ultimate load-bearing capacity of C-CFSST ness (T=1.0mm, T=1.2mm, T=1.5mm) andnano-silica con- stub columns after being exposed to freezing and crete strength (fc=20MPa, fc=30MPa, fc=40MPa).
    [Show full text]
  • NANO ALUMINA(Al2o3) & FERRIC
    International Journal of Management, Technology And Engineering ISSN NO : 2249-7455 COMPRESSIVE STRENGTH BEHAVIOUR OF CONCRETE USING NANOSILICA(SiO2), NANO ALUMINA(Al2O3) & FERRIC OXIDE(Fe2O3) Abinaya Ishwarya G K1, G MadhanKumar2 1Assistant Professor, Department of Civil Engineering, Vels Institute of Science Technology & Advanced Studies, Chennai, Tamilnadu 2 Assistant Professor, Department of Mechanical Engineering, Thiruvalluvar college of Engineering and Technology, Vandavasi, Thiruvannamalai, Tamilnadu Abstract: The most active research areas dealing with cement and concrete understand of the hydration of cement particles and use of nano size ingredients such as nano silica, nano alumina, ferric oxide. If cement with nano size particles can be manufactured and processed, it will open up a large number of opportunities in the field of ceramics and high strength composites etc. The main objective of this paper is to outline some of the application of nanotechnology in concrete and comparing this concrete with ordinary concrete. Keyword: Compressive Strength, Tensile Strength, Flexural Strength, Nano alumina, Ferric oxide. I.INTRODUCTION I.1 GENERAL The main advances have been in the nano science of cementitious materials with an increase in the knowledge and understanding of basic phenomena in cement at the nano scale (e.g., structure and mechanical properties of the main hydrate phases, origins of cement cohesion, cement hydration, interfaces in concrete, and mechanisms of degradation). Recent strides in instrumentation for observation and measurement at the nano scale are providing a wealth of new and unprecedented information about concrete, some of which is confounding previous conventional thinking. Important earlier summaries and compilations of nanotechnology in construction can be found in this paper reviews the main developments in the field of nanotechnology and nano science research in concrete, along with their implications and key findings.
    [Show full text]
  • 241R-17: Report on Application of Nanotechnology and Nanomaterials in Concrete
    Report on Application of Nanotechnology and Nanomaterials in Concrete Reported by ACI Committees 236 and 241 ACI 241R-17 ACI First Printing January 2017 ISBN: 978-1-945487-50-7 Report on Application of Nanotechnology and Nanomaterials in Concrete Copyright by the American Concrete Institute, Farmington Hills, MI. All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ACI. The technical committees responsible for ACI committee reports and standards strive to avoid ambiguities, omissions, and errors in these documents. In spite of these efforts, the users of ACI documents occasionally find information or requirements that may be subject to more than one interpretation or may be incomplete or incorrect. Users who have suggestions for the improvement of ACI documents are requested to contact ACI via the errata website at http://concrete.org/Publications/ DocumentErrata.aspx. Proper use of this document includes periodically checking for errata for the most up-to-date revisions. ACI committee documents are intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. Individuals who use this publication in any way assume all risk and accept total responsibility for the application and use of this information. All information in this publication is provided “as is” without warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose or non-infringement.
    [Show full text]
  • 2016 I ANNUAL REPORT Nuclear Science User Facilities
    2016 I ANNUAL REPORT Nuclear Science User Facilities /"'7 Nuclear Science ,'-- @ ilJU-r User Facll1tles J Nuclear Science User Facilities Analytical Laboratory, Materials & Fuels Complex (MFC), Idaho National Laboratory (INL) Nuclear Science User Facilities 995 University Boulevard Idaho Falls, ID 83401-3553 nsuf.inl.gov Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. References herein to any specific commercial product, process, or service by trade name, trade mark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the U.S. Government or any agency thereof. INL/EXT-17-43047 Prepared for the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07-051D14517. (This report covers the period beginning October 1, 2015, through September 30, 2016) 2 2016 | ANNUAL REPORT OUR NSUF TEAM J. Rory Kennedy Director (208) 526-5522 [email protected] Dan Ogden Jeff Benson Deputy Director Program Administrator
    [Show full text]
  • Design of Load Bearing Structure of Multilevel Automated Car Garage
    Строительство уникальных зданий и сооружений. ISSN 2304-6295. 9 (24). 2014. 97-105 journal homepage: www.unistroy.spb.ru Design of load bearing structure of multilevel automated car garage K. Runevski1 Institute of Earthquake Engineering and Seismology, 165 Todor Aleksandrov, 165, 1000, Skopje, Republic of Macedonia. ARTICLE INFO Article history Keywords Technical paper Received 10 September 2014 car garage, Accepted 23 September 2014 bearing structure, ring plan, steel, reinforced concrete, design ABSTRACT This paper is a part of a graduation thesis that was presented at the Faculty of Civil Engineering in Skopje. The subject of this thesis is design of a load bearing structure of an automated car garage. It is a multi storey structure with a ring plan. In its middle part, there is a central column resting at the level of the basement plate and the roof structure level. The part of the structure above ground is designed as steel braced frame structure, while the part below ground as a reinforced concrete structure composed from frames and walls. Static analysis of a 3D mathematical model was performed by use of the Autodesk Robot Structural Analysis Professional software. Contents 1. Introduction 98 2. Project parameters 98 3. Technical description 98 4. Analysis and design of construction 99 5. Project documentation 100 6. Conclusion 102 1 Corresponding author: [email protected] (Kristian Runevski , Post-graduate student) Строительство уникальных зданий и сооружений, 2014, №9 (24) Construction of Unique Buildings and Structures, 2014, №9 (24) 1. Introduction The development of motorization has caused many social problems with parking and garaging cars especially in big urban areas, there the number of vehicles has constantly been increasing.
    [Show full text]
  • Microstructural Investigations of Ultra-High Performance Concrete Obtained by Pressure Application Within the First 24 Hours of Hardening
    Construction Science 10.2478/cons-2013-0008 2013 /14____________________________________________________________________________________________________________ Microstructural Investigations of Ultra-High Performance Concrete Obtained by Pressure Application within the First 24 Hours of Hardening Janis Justs1, Diana Bajare2, Aleksandrs Korjakins3, Gundars Mezinskis4, Janis Locs5, Girts Bumanis6, 1-6 Riga Technical University Abstract. In this study, the effect of pressure application (0–50 There are examples of commercially available UHPC that is MPa) to fresh concrete right after casting and during the first 24 used in the construction industry today. One such example is hours of hardening has been examined. Supplementary Ductal®. The Ductal® technology was developed by the cementitious materials in a form of silica fume, nanosilica and combined efforts of three companies: Lafarge – the ground quartz sand were used. The aim of pressure application construction materials manufacturer, Bouygues – the was to reduce porosity, thus improving concrete mechanical properties. Considerable reduction in porosity and a subsequent contractor in civil and structural engineering and Rhodia – the increase in compressive strength reaching the level of Ultra-High chemical materials manufacturer [11]. Performance Concrete (UHPC) were achieved. Mechanical and The aim of this study is to investigate the influence of physical properties were tested and gas sorption porosimetry, pressure applied during the sample hardening process. mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), Concrete mix composition with the designed compressive as well as scanning electron microscopy (SEM) were used for strength of approximately 100 MPa at 28 days was selected as material characterization. a basic mix. Pressure has been applied right after casting in order to improve concrete properties. Mechanical strength of Keywords: Ultra-High Performance Concrete (UHPC), prepared samples was compared.
    [Show full text]
  • Effect of Nano Silica Particles on Impact Resistance and Durability of Concrete Containing Coal Fly Ash
    nanomaterials Article Effect of Nano Silica Particles on Impact Resistance and Durability of Concrete Containing Coal Fly Ash Peng Zhang 1 , Dehao Sha 1, Qingfu Li 1,*, Shikun Zhao 1 and Yifeng Ling 2 1 School of Water Conservancy Engineering, Zhengzhou University, Zhengzhou 450001, China; [email protected] (P.Z.); [email protected] (D.S.); [email protected] (S.Z.) 2 Department of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA 50011, USA; [email protected] * Correspondence: lqfl[email protected] Abstract: In this study, the effect of adding nano-silica (NS) particles on the properties of concrete containing coal fly ash were explored, including the mechanical properties, impact resistance, chloride penetration resistance, and freezing–thawing resistance. The NS particles were added into the concrete at 1%, 2%, 3%, 4%, and 5% of the binder weight. The behavior under an impact load was measured using a drop weight impact method, and the number of blows and impact energy difference was used to assess the impact resistance of the specimens. The durability of the concrete includes its chloride penetration and freezing–thawing resistance; these were calculated based on the chloride diffusion coefficient and relative dynamic elastic modulus (RDEM) of the samples after the freezing–thawing cycles, respectively. The experimental results showed that the addition of NS can considerably improve the mechanical properties of concrete, along with its freezing–thawing resistance and chloride penetration resistance. When NS particles were added at different replacement Citation: Zhang, P.; Sha, D.; Li, Q.; levels, the compressive, flexural, and splitting tensile strengths of the specimens were increased Zhao, S.; Ling, Y.
    [Show full text]
  • 67 Creep Behavior of Nano Silica Concrete Under Different Stress
    Creep Behavior of Nano Silica Concrete under Different Stress Levels Ihab A. Adam1, Osama Hodhod2, Hasan Alesnawi3 and Eman A. Abd Elazeem4 1Professor, Construction Research Institute, National Water Research Centre, Delta Barrage, Egypt 2Professor, Civil Engineering Department, Faculty of Engineering, Cairo University, Egypt 3 Professor, Civil Engineering Department, Faculty of Engineering, Al–Azhar University, Egypt 4Assistant lecturer, Institute of Aviation Engineering and Technology, Cairo, Egypt, E-mail: [email protected] Abstract: Concrete structures have a long term behavior based on many factors such as material properties, load history and distribution, geometry of the structure, and the environmental conditions. Researchers are frequently pushing the limits to develop the performance of concrete with the aid of advanced chemical admixtures and supplementary cementations materials like nano silica (NS), silica fume, fly ash, blast furnace slag, steel slag. In this study, creep behavior of NS concrete was investigated. The dimensions of concrete specimens used for measuring creep strains were 100x100x400 mm. All creep specimens were subjected to a nominal stress of 30% and 50% of concrete compressive strength. Immediately after loading, the initial measurements were recorded. Because of the loss of loading due to shrinkage and creep strains, which occurs with time, each creep specimen was reloaded again at 2, 9, and 30 days, and every 28 days thereafter, after the first application of load. It was found that all specimens containing NS have larger values of creep than the control concrete. The specimens which contain 4% NS had the lowest values of creep and that contain 2% NS had the largest values of creep if they compared to other NS specimens.
    [Show full text]
  • Nano-Inclusions Applied in Cement-Matrix Composites: a Review
    materials Review Nano-Inclusions Applied in Cement-Matrix Composites: A Review Guillermo Bastos 1, Faustino Patiño-Barbeito 1,*, Faustino Patiño-Cambeiro 2 and Julia Armesto 3 1 Industrial Engineering School, University of Vigo, Rúa Conde de Torrecedeira 86, 36208 Vigo, Spain; [email protected] 2 Centro de Ciências Exatas e Tecnológicas, Centro Universitário Univates, Rua Avelino Tallini 171, Lajeado RS 95900-000, Brazil; [email protected] 3 Mining Engineering School, University of Vigo, Campus as Lagoas Marcosende, 36310 Vigo, Spain; [email protected] * Correspondence: [email protected]; Tel.: +34-986-813-698 Academic Editor: Mady Elbahri Received: 21 October 2016; Accepted: 9 December 2016; Published: 16 December 2016 Abstract: Research on cement-based materials is trying to exploit the synergies that nanomaterials can provide. This paper describes the findings reported in the last decade on the improvement of these materials regarding, on the one hand, their mechanical performance and, on the other hand, the new properties they provide. These features are mainly based on the electrical and chemical characteristics of nanomaterials, thus allowing cement-based elements to acquire “smart” functions. In this paper, we provide a quantitative approach to the reinforcements achieved to date. The fundamental concepts of nanoscience are introduced and the need of both sophisticated devices to identify nanostructures and techniques to disperse nanomaterials in the cement paste are also highlighted. Promising results have been obtained, but, in order to turn these advances into commercial products, technical, social and standardisation barriers should be overcome. From the results collected, it can be deduced that nanomaterials are able to reduce the consumption of cement because of their reinforcing effect, as well as to convert cement-based products into electric/thermal sensors or crack repairing materials.
    [Show full text]
  • The Effects of Nanosilica on Mechanical Properties and Fracture Toughness of Geopolymer Cement
    polymers Article The Effects of Nanosilica on Mechanical Properties and Fracture Toughness of Geopolymer Cement Cut Rahmawati 1,2 , Sri Aprilia 1,3,*, Taufiq Saidi 1,4, Teuku Budi Aulia 1,4 and Agung Efriyo Hadi 5 1 Doctoral Program, School of Engineering, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia; [email protected] (C.R.); taufi[email protected] (T.S.); [email protected] (T.B.A.) 2 Department of Civil Engineering, Engineering Faculty, Universitas Abulyatama, Aceh Besar 23372, Indonesia 3 Department of Chemical Engineering, Engineering Faculty, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia 4 Department of Civil Engineering, Engineering Faculty, Universitas Syiah Kuala, Banda Aceh 23111, Indonesia 5 Department of Menchanical Engineering, Universitas Malahayati, Lampung 35153, Indonesia; [email protected] * Correspondence: [email protected] Abstract: Nanosilica produced from physically-processed white rice husk ash agricultural waste can be incorporated into geopolymer cement-based materials to improve the mechanical and micro performance. This study aimed to investigate the effect of natural nanosilica on the mechanical properties and microstructure of geopolymer cement. It examined the mechanical behavior of geopolymer paste reinforced with 2, 3, and 4 wt% nanosilica. The tests of compressive strength, direct tensile strength, three bending tests, Scanning Electron Microscope-Energy Dispersive X-ray (SEM/EDX), X-ray Diffraction (XRD), and Fourier-transform Infrared Spectroscopy (FTIR) were undertaken to evaluate the effect of nanosilica addition to the geopolymer paste. The addition of 2 wt% nanosilica in the geopolymer paste increased the compressive strength by 22%, flexural Citation: Rahmawati, C.; Aprilia, S.; strength by 82%, and fracture toughness by 82% but decreased the direct tensile strength by 31%.
    [Show full text]
  • Structural Health Monitoring of the First Geosynthetic Reinforced Soil – Integrated Bridge System in Hawaii
    STRUCTURAL HEALTH MONITORING OF THE FIRST GEOSYNTHETIC REINFORCED SOIL – INTEGRATED BRIDGE SYSTEM IN HAWAII A THESIS SUBMITTED TO THE GRADUATE DIVISION OF THE UNIVERSITY OF HAWAI‘I AT MĀNOA IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN CIVIL ENGINEERING MAY 2014 By Joseph Brandin Lawrence Thesis Committee: Phillip Ooi, Chair Person Horst G. Brandes Peter G. Nicholson ABSTRACT Geosynthetic reinforced soil is defined as closely-spaced (≤ 12 inches; typically 8 inches) alternating layers of geosynthetic reinforcement and compacted soil. A geosynthetic reinforced soil - integrated bridge system (GRS-IBS) consists of three main components; a reinforced soil foundation (RSF), a GRS abutment, and an integrated approach. GRS-IBS is being promoted by the Federal Highway Administration (FHWA) where GRS abutments are used to support single span bridge superstructure in their Everyday Counts Initiative, which is focused on accelerating implementation of proven, market-ready technologies. There are many advantages of GRS abutments over traditional concrete abutment walls but two of the more notable ones are: (1) elimination of the need to form, pour and wait for the concrete to cure resulting in accelerated construction and significant cost savings; and (2) reduced carbon footprint with less concrete and hence cement (production of 1 ton of cement releases 1 ton of CO2 into the atmosphere) utilized in the abutment walls. The first GRS-IBS in Hawaii was recently constructed in Lahaina, Maui. The superstructure was instrumented with strain gages to measure the effects of concrete shrinkage and the GRS abutments were instrumented to measure footing vertical pressures, lateral pressures behind the end wall and the GRS facing, bridge footing settlement and lateral displacement of the GRS facing.
    [Show full text]