DMP-BDT220GNGCGAGW-VQT3V64.book 1 ページ ２０１２年２月６日 月曜日 午前９時５２分
Operating Instructions Blu-ray DiscTM Player
Model No. DMP-BDT220
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.
GN GC GA GW VQT3V64
until 2012/2/20 DMP-BDT220GNGCGAGW-VQT3V64.book 2 ページ ２０１２年２月６日 月曜日 午前９時５２分
Safety precautions
WARNING CAUTION Unit Unit To reduce the risk of fire, electric shock or product damage, ≥ This unit utilizes a laser. Use of controls or adjustments or ≥ Do not expose this unit to rain, moisture, dripping or performance of procedures other than those specified splashing. herein may result in hazardous radiation exposure. ≥ Do not place objects filled with liquids, such as vases, on ≥ Do not place sources of naked flames, such as lighted this unit. candles, on this unit. ≥ Use only the recommended accessories. ≥ This unit may receive radio interference caused by mobile ≥ Do not remove covers. telephones during use. If such interference occurs, please ≥ Do not repair this unit by yourself. Refer servicing to increase separation between this unit and the mobile qualified service personnel. telephone. ≥ Do not let metal objects fall inside this unit. [For[Australia[and[New[Zealand] ≥ Do not place heavy items on this unit. ≥ This unit is intended for use in moderate climates. [Except[Australia[and[New[Zealand] AC mains lead ≥ This unit is intended for use in tropical climates. To reduce the risk of fire, electric shock or product damage, ≥ Ensure that the power supply voltage corresponds to the voltage printed on this unit. Placement Place this unit on an even surface. ≥ Insert the mains plug fully into the socket outlet. ≥ Do not pull, bend, or place heavy items on the lead. To reduce the risk of fire, electric shock or product damage, ≥ Do not handle the plug with wet hands. ≥ Do not install or place this unit in a bookcase, built-in ≥ Hold onto the mains plug body when disconnecting the plug. cabinet or in another confined space. Ensure this unit is ≥ Do not use a damaged mains plug or socket outlet. well ventilated. Install this unit so that the AC mains lead can be unplugged ≥ Do not obstruct this unit’s ventilation openings with from the socket outlet immediately if any problem occurs. newspapers, tablecloths, curtains, and similar items. ≥ Do not place the unit on amplifiers/receivers or equipment SD card that may become hot. The heat can damage the unit. Keep the Memory Card out of reach of children to prevent ≥ Do not expose this unit to direct sunlight, high swallowing. temperatures, high humidity, and excessive vibration.
Batteries Mishandling of batteries can cause electrolyte leakage and may cause a fire. ≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥ When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ≥ Do not mix old and new batteries or different types at the same time. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. ≥ Do not take apart or short circuit. ≥ Do not recharge alkaline or manganese batteries. ≥ Do not use batteries if the covering has been peeled off. Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.
2 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 3 ページ ２０１２年２月６日 月曜日 午前９時５２分 3ページ DMP-BDT220GNGCGAGW-VQT3V64.book 2. Replace thefuseandcloseorattachcover. Replace 2. thefusecoverwithascrewdriver. Open 1. maydiffer plug. Illustrations fromactualACmains andfollowtheinstructionsbelow.fitted ACmainsplug plug (figuresAandB).Confirmthe mains ofthefusediffertotypeAC The location according replace thefuse How to Arabia) (For Saudi Figure A Figure A (5 ampere) Fuse Figure B Figure B Fuse cover (5 ampere) Fuse STEP 6 : Reprogramming : Reprogramming 6 STEP 12 ...... : Settings 5 STEP 11 . . . . 4 : STEP Connecting lead. the AC mains 11 ...... network the : to Connecting 3 STEP : to Connecting 2 STEP 9 ...... TV. a : to Connecting 1 STEP 8 . . Controlreference guide 5 . . media Playable 4 ...... care. media and Unit 4 . . Accessories 2 ...... precautions Safety Table of contents rcuin fwrls A oncin..... 41 . . . . . of wireless LAN connection Precautions 40 . . Specifications. 39 ...... information Supplemental .. . . 37 ...... Messages 33 ...... guide Troubleshooting 27 . . menu Setup 24 . . menu Option 23 ...... Control™” “HDAVI Link VIERA 21 .. NetworkHome feature. 20 . . . Service) (EnjoyingInternet Connect VIERA 17 . . . Playback 16 . . Mode. User Multi 15 . . . menu HOME 15 . . Insertingor removingmedia ≥ ≥ Firmware updatesFirmware ( ( copied content Restriction onuseunauthorized of h eoecnrl 14 ...... control. remote the 10 . . amplifier/receiver an Connections andsettings Getting started Reference Playback Settings > 38) > 13) VQT3V64 3
Reference Settings Playback Connections and settings Getting started DMP-BDT220GNGCGAGW-VQT3V64.book 4 ページ ２０１２年２月６日 月曜日 午前９時５２分
AccessoriesGetting started Unit and media care Check the supplied accessories before using this ∫ Clean this unit with a soft, dry cloth unit. ≥ Never use alcohol, paint thinner or benzine to [For[Australia[and[New[Zealand] clean this unit. 1 Remote control ≥ Before using chemically treated cloth, carefully (N2QAYB000726) read the instructions that came with the cloth. 2 Batteries for remote control 1 Audio/Video cable ∫ This unit’s lens 1 AC mains lead Lens cleaner: RP-CL720AE [For]the]Middle]East] ≥ This lens cleaner may not be for sale 1 Remote control depending on the region. (N2QAYB000726) ≥ This lens cleaner is sold as specific for DIGA, 2 Batteries for remote control but can be used on this unit as well. 2 AC mains lead* 1 HDMI Cable [For[South[East[Asia] ∫ Clean discs 1 Remote control (N2QAYB000726) DO DO NOT 2 Batteries for remote control 2 AC mains lead* 1 HDMI Cable [For[India] 1 Remote control Wipe with a damp cloth and then wipe dry. (N2QAYB000726) 2 Batteries for remote control ∫ Disc and card handling precautions 1 AC mains lead ≥ Handle discs by the edges to avoid inadvertent 1 HDMI Cable scratches or fingerprints on the disc. ≥ Do not attach labels or stickers to discs. * See page 11 for more information. ≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or ≥ Product numbers provided in these operating instructions any other solvent. correct as of January 2012. These may be subject to ≥ Clean any dust, water, or foreign matter from change. the terminals on the rear side of the card. ≥ Do not use AC mains lead with other equipment. ≥ Do not use the following discs: ∫ Using the remote control – Discs with exposed adhesive from removed Insert so the poles (i and j) match those in the stickers or labels (rented discs, etc.). remote control. – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the R6/LR6, AA user settings. (> 33, “To return all settings to the (Alkaline or manganese batteries) factory preset.”) Point it at the remote control signal sensor on this ≥ The operation history may be recorded in the unit. (> 8) memory of this unit.
4 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 5 ページ ２０１２年２月６日 月曜日 午前９時５２分 5ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ Playable media See See pages 6–7 and 40for more information on the of types content that canbe played. Device USB DVD CD BD SD Disc markings — — — (Compatible with both miniandmicro types) DCMmr ad(rm4G o3 GB) 32 to GB 4 (from Card Memory SDHC DMmr ad(rm8M o2GB) to 2 MB Card 8 SD Memory (from DCMmr ad(8G,6 GB) GB, 64 Card Memory (48 SDXC R+W+ DL +R/+RW/+R Device types Device USB devices USB u o2TB) (up2 to DVD-Video V- DL DVD-R Music CD Music BD-Video DVD-RW CD-RW BD-RE DVD-R BD-R CD-R Video, AVCHD Video, JPEG, MPO Video Video, DivX DivX FLAC, MP3, WAV MPEG, JPEG, MPO, WAV [CD-DA], Music MPO, FLAC,MP3, MPO MP4, MPEG2,JPEG, 3D, AVCHD, AVCHD FLAC, MP3, WAV MKV, JPEG, MPO, Video Video, AVCHD, DivX DivX [CD-DA] Music Contents format ® ® , MKV,, MP4, , MKV, JPEG, VQT3V64 ® , MKV 5 ® ,
Getting started DMP-BDT220GNGCGAGW-VQT3V64.book 6 ページ ２０１２年２月６日 月曜日 午前９時５２分
∫ Discs that cannot be played by this unit DVD-Video: ≥ DVD-RAM [For]the]Middle]East] ≥ Super Audio CD This unit can Example: ≥ Photo CD play DVD-Video ≥ DVD-Audio discs supporting 2 Video CD and Super Video CD 3 ≥ the region 2 ALL 5 ≥ WMA discs number “2” or ≥ DivX Plus HD discs “ALL”. ≥ HD DVD [For[South[East[Asia]
∫ Region management information This unit can Example: play DVD-Video BD-Video: 2 discs supporting ALL 3 [For[South[East[Asia] the region 3 4 This unit can number “3” or Example: “ALL”. play BD-Video discs supporting [For[Australia[and[New[Zealand] the region code This unit can Example: “A”. play DVD-Video discs supporting 2 [For[Australia[and[New[Zealand] 4 ALL 3 [For]the]Middle]East] the region 4 number “4” or This unit can Example: “ALL”. play BD-Video discs supporting [For[India] the region code “B”. This unit can Example: play DVD-Video 2 [For[India] discs supporting 5 ALL 3 the region 5 This unit can Example: number “5” or play BD-Video “ALL”. discs supporting the region code “C”.
6 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 7 ページ ２０１２年２月６日 月曜日 午前９時５２分 7ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ ≥ ≥ ≥ ≥ ∫ be etc.) cannot CDs, guaranteed. (copy control to CD-DA specifications conform not do that CDs of quality sound and Operation ∫ ≥ ≥ ∫ ≥ ≥ ∫ instructions. recorder’s the to unit. Pleaserefer playonthis to the recorder by bya recorded recorder, etc. needsto be finalized CD-R/RW DLand +R/+RW/+R DL, DVD-R/RW/R ∫ card capacity.card be lessmay slightly Useable thanmemory the etc. formatted being card the to due erased be may contents recorded ordevices, computers If the SD card is usedwith incompatible Cards in exFAT. in FAT32Cards Memory format and SDXC FAT16 formats, as aswell SDHC Memory that SDCardSpecificationsmeet FAT12 and Cards is Memory unit compatible withSD This to “LOCK”. card) the tab record prevention move (on the SD To theprotect card’s contents, provided. customer or cards, otherwise with such areusually These card. supplied adaptor an with used be must but used, be can Cards microSDXC Cardsand microSDHC Cards, microSD Cards, miniSD virtually. canbeenjoyedas 3D video 2D ( Cable. compatible usinga TV High Speed HDMI 3D a to is connected unit when this back played be can still pictures 3D and videos 3D PCM. 5.1ch is sound Dolby of number possible maximum the “PCM”, +/Dolby TrueHD”D/Dolby D “DolbytoIf is set in adopted BD-Video. Audio) Audioand Resolution DTS-HD Master Digital Plus, Dolby TrueHD, High DTS-HD unitThis supports high bit audio rate (Dolby SD card SD Music CD 3D BD-Video Finalize
(> 28) > 26) audio etc., etc., audio correctly. play thenot may back Disc recorders Blu-ray recorded in DR using Discs mode Panasonic ∫ ≥ ≥ ≥ ≥ ≥ ∫ ≥ ≥ external power supply unit. supply power external ofits theuse require may HDD of typesSome FAT32 NTFS. and This unit an cansupport to HDD formatted This unit supportsHigh Speed. USB2.0 are supported. FAT12,FAT16, FAT32 systems file NTFS and charging. This unit doesnot USB support device devices. USB with connection guarantee all This doesnot unit instructions carefully. Readthedisc’s described intheseoperatinginstructions. abletocontrolplayas played, soyoumaynotalwaysbe howdiscsare The producersofthedisccancontrol created. and howthefileswere recording, therecordingmethod theconditionof cases duetothetypeofmedia, abovemediainsome It maynotbepossibletoplaythe BD-RE, BD-R USB device VQT3V64 7
Getting started DMP-BDT220GNGCGAGW-VQT3V64.book 8 ページ ２０１２年２月６日 月曜日 午前９時５２分
Control reference guide 1 Turn the unit on and off 10 2 TV operation buttons (> 14) You can operate the TV through the unit’s 1 11 remote control. [Í TV] : Turn the television on and off 2 12 [AV] : Switch the input select [ijVOL] : Adjust the volume 13 3 Select title numbers, etc./Enter numbers or 3 14 characters 15 4 Cancel 5 Basic playback control buttons (> 17) 4 16 17 6 Show status messages (> 18) 7 Show Top menu (> 18) 5 8 Show Option menu (> 24) 9 Coloured buttons (red, green, yellow, blue) Used for various purposes depending on the display 6 18 10 Transmit the remote control signal 19 11 Open or close the disc tray (> 15) 20 12 Show the Home screen of the VIERA 7 Connect (> 20) 21 13 Start up a video communication (> 20) 14 Set up 3D effects (> 26) 8 22 15 Switch on/off Secondary Video 9 (Picture-in-picture) (> 24) 16 Switch on/off Secondary Audio (> 24) 17 Select audio (> 17) 18 Exit the menu screen 19 Show Pop-up menu (> 18) 20 Show HOME menu (> 15) 21 [3, 4, 2, 1] : Move the highlight for selection [OK] : Confirm the selection (2;)(;1) : Frame-by-frame (> 17) 22 Return to previous screen
1 5 10
CALL SD CARD Pull to flip down the 2 3 4 6 7 89 front panel. 1 Standby/on switch (Í/I) (> 12) 6 Remote control signal sensor Press to switch the unit from on to standby Distance: Within approx. 7 m mode or vice versa. In standby mode, the unit Angle: Approx. 20e up and down, 30e left and is still consuming a small amount of power. right 2 Disc tray (> 15) 7 Display 3 SD card slot (> 15) 8 Stop (> 17) 4 USB port (> 15) 9 Start play (> 17) 5 CALL LED 10 Open or close the disc tray (> 15) The LED will light up when this unit receives incoming call etc. of the video Rear panel terminals (> 9–11) communication. (> 20)
8 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 9 ページ ２０１２年２月６日 月曜日 午前９時５２分 9ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ ≥ ≥ either oneofPerform the following connections aTV to Connecting : STEP 1 and settings Connections ≥ RP-CDHS15 (1.5 (3.0 RP-CDHS30 m), m),RP-CDHS15 (5.0 RP-CDHS50 m), etc. (High Speed Cable): part number HDMI Recommended or less. meters 5.0 cables HDMI pleaseuse 1080p signal, outputting Panasonic’s When cable. HDMI use that you is recommended It [For[the[Middle[East,[South[East[Asia[and[India] SpeedHigh Non-HDM cables. the Use HDMI properly.be displayed not a videosignalsthrough connect not video Do recorder. picture guardprotection the Dueto may copy power. y that we recommend connections, any making Before Connect of colour.terminals the same Connect HDMI HDMI AV OUT (High quality) VIDEO OUT(Standard quality) (only supplied for the Middle East, South East Asia and India) and Asia East South Middle East, the for (only supplied (only supplied Australia for and NewZealand) The HDMI-compliant cable is supplied with this unit. this supplied with is cable HDMI-compliant The Audio/Video cable HDMI cableHDMI I-compliant be cablescannot utilized. in in with your accordance inputTV terminal. ou temporarily disconnect all the units allthe from AC disconnect ou temporarily HDMI IN R L VIDEO IN VQT3V64 AUDIO IN 9
Connections and settings Getting started DMP-BDT220GNGCGAGW-VQT3V64.book 10 ページ ２０１２年２月６日 月曜日 午前９時５２分
STEP 2 : Connecting to an amplifier/receiver Perform either one of the following connections in accordance with your amplifier/receiver input terminal. HDMI AV OUT
HDMI cable (only supplied for the Middle East, South East Asia and India) HDMI cable
HDMI OUT HDMI IN HDMI IN (ARC) (ARC)
Amplifier/receiver
≥ Set “Digital Audio Output” (> 28). ≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch. ≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is also required to connect the amplifier/receiver and TV using an optical digital cable.
OPTICAL
Optical digital cable
OPTICAL IN
Amplifier/receiver
≥ Set “HDMI Audio Output” to “Off” (> 28). ≥ Set “Digital Audio Output” (> 28).
10 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 11 ページ ２０１２年２月６日 月曜日 午前９時５２分 11ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ mains lead AC Connectingthe :STEP 4 ≥ ≥ unitThis canbe to connected detailsFor about to method, supplied refer theconnection instructions with the equipment. connected ≥ w used be can following services The thenetwork Connecting to :STEP 3 ≥ ≥ ≥ ≥ ≥ ≥ AC mainslead without a label isfor areasother Thailand.than Thailand. for labelis a lead with mains AC [For[South[East[Asia] [For]the]Middle]East] disconnected. ifconservation, power youwill not be using this ( power AC of amount a small consumes unit This connection. LAN wireless of precautions the for page 41 See only.)in English is site (This http://panasonic.jp/support/global/cs/ router, wireless your to refer on compatibility information up-to-date For ( updated can be Firmware Use category 5 or abovestraightUse 5 category LANcables You( BD-Live enjoy can Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.the damage terminal can LAN the in cable a LAN than other cable any Inserting You ( Connect VIERA enjoy can (> You Network) (Home other devices canaccess The unit is not compatible with public wireless LAN se LAN wireless public with compatible is not unit The LAN cable connection Wireless LANconnection [For\Saudi\Arabia] 21) CONNECTION. BE TOSURE READ FORTHE CAUTION THE AC MAINS ON LEAD PAGE 3BEFORE ACmainslead Use the for that the matches the areayoulive socket in. > 18) > a wireless router wirelessly.a wirelessrouter 13) LAN Cable > 20) hen this unit is to connected broadband. AC mains lead (supplied) (STP) when connecting to peripheral devices. peripheral to when connecting (STP) Broadband router,Broadband etc. unit for anextended period of time, it canbe Wireless router,Wireless etc. > ≥ 40) evenwhen off.turned In the interest of This unit supports Wi-Fi Direct Wi-Fi supports unit This connected via Wi-FiDirect while available isnot access Internet etc. feature, Network Home enjoying when function You this use can wireless connection to wireless devices without router. rvices provided in rvices airports, stations, etc. cafes, socket To ahousehold mains TM . ( TM > and can make a a make can and 1 30) 21, Internet Internet VQT3V64 11
Connections and settings DMP-BDT220GNGCGAGW-VQT3V64.book 12 ページ ２０１２年２月６日 月曜日 午前９時５２分
STEP 5 : Settings Easy Network Setting Easy Setting After completing “Easy Setting”, you can perform “Easy Network Setting”. After connecting your new player for the first time Select “Wired” or “Wireless” and press [OK]. and pressing [Í], a screen for the basic settings will appear. Easy Network Setting Select a connection mode. Preparation Current setting : Wired Turn on the television and select the appropriate video input on the television. 1 Press [Í]. Setup screen appears. 2 Follow the on-screen instructions and Wired Wireless apply the settings. OK RETURN
∫ “Wired” connection ≥ You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (> 31) Follow the on-screen instructions to apply your ≥ If this unit is connected to a Panasonic TV (VIERA) connection settings. supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this ∫ “Wireless” connection unit. Before beginning wireless connection setup ≥ Obtain your network name (SSID*1). ≥ If your wireless connection is encrypted, please be sure that you know your encryption key. Select “Search for wireless network” or “WPS (PUSH button)” and press [OK], then follow the on-screen instructions and apply the settings. e.g.,
Wireless Settings
Select a connection method to wireless access point. Please refer to the operating instructions of your wireless access point about connection methods.
Search for wireless network WPS (PUSH button)
WPS (PUSH button): If your wireless router supports e.g. WPS (PUSH button), you can easily perform the settings by pressing WPS button on it. *2
12 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 13 ページ ２０１２年２月６日 月曜日 午前９時５２分 13ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ network: wireless for Search 2 1 LANdevices. wireless of security facilitates settings relating to and the connection *2 *1 ≥ ≥ ≥ Setup Protected (Wi-Fi WPS ≥ ≥ ≥ ≥ – Stealth SSID will not be displayed when you when Stealth displayed be willnot SSID – search displayed, is not name network your If – [OK]. and yournetwork Select displayed. press name willbe networks availablewireless the for wirelessnetwork”, “Search youselect When Setup wirelessrouterThe compatibleWi-FiProtected with devices. iftheSSIDmatchesforboth is possible aparticularnetwork. Transmission LANtoidentify wireless nameusedby SSID(ServiceSetIDentification)isa An Input the encryption key of your network. your of key encryption the Input Key willinput screen Encryption be displayed. encrypted, is network wireless your If Network Setting” in the Setup menu. ( Setting”intheSetupmenu. Network Youby selecting“Easy canperformthissetupanytime thehuborrouter. totheoperatinginstructionsof Refer Settings”. ( Settings”. You using“Network canredothesesettingsindividually data such as personal or secret information. data suchaspersonalorsecret being illegitimately viewedby a third party, or theleaking of of thecommunication mayresultinthecontent encryption to anetworkwithout beawarethatconnecting Please ofthewirelessrouter.settings withthe networksettingsonyourPCinaccordance the When you havetroublegettingonlineon your PC, perform mightchange. level,etc.)ofthewirelessrouter (encryption onthisunit,thesettings After performingnetworksettings illegal access. networksmayberegardedas these not have usage rights maybedisplayed; however, using youdo wirelessnetworks(SSID)forwhich environment, automaticsearchesinawirelessnetwork During youdonothaveusagerights. which anywirelessnetworkfor not usethisunittoconnect Do “Manual setting” “Manual “Connection Setting” > Setting” “Connection Settings” “Wireless select [OK] Settings” “Player select Press [OK]. ≥ flashing. starts lamp the until router wireless the of button corresponding button or WPS Press (Press [HOME] setting”. “Manual by using manually Enter network”. wireless for “Search select control. remote bypressing again the red button onthe of the wirelessrouter. For details, to refer the operating instruction TM may havethemark. may > > select “Network Settings” Settings” “Network select 30) > > select“Setup” [OK]) [OK] [OK] > TM select “Network” “Network” select > ) is a standard that standard a ) is [OK] [OK] > > 30) select select > > > [OK] [OK] select select > > >
select “Update Now” “Updateselect Now” Settings” “Player select [OK] [OK] Press [HOME] Press [HOME] and the following screen will be displayed. will screen following the and unit’s the display. on displayed restartwillUnit After the is firmware installed, “FINISH” will be place. takes update thewhile operation any perform or power theAC theunitfrom DISCONNECT NOT DO Tofirmware the update displayed. is message following is the available, version new firmware a When connection. broadband a to whenconnected the Internet automatically via firmware the checking is capable of unit This charge. of free available are updates These operates. feature a way the improve add or may that unit this for firmware Occasionally, updated release may Panasonic ≥ ≥ ≥ To unit.( showthefirmwareversiononthis (This siteisinEnglishonly.) http://panasonic.jp/support/global/cs/ to aCD-Rupdatefirmware. the andburnit latest firmwarefromthefollowingwebsite downloadthe connected totheInternet,thenyoucan unit isnot If downloadingonthisunitfailsor set “Automatic Update Check” to “Off”. (> set “AutomaticUpdateCheck”to“Off”. thelatestfirmwareversion, If youdonotwanttocheckfor connection environment. onthe longer ormaynotworkproperlydepending minutes.ItmaytakeDownloading willrequireseveral “Firmware Version Information”) Firmware updates >
select “Firmware Update” “Firmware select Current Version: The firmwarehasbeenupdated. Please updatefirmwareinSetup. New firmwareisavailable. >
select “Setup” “Setup” select > [OK] x.xx >
select “System” “System” select > VQT3V64 > 32) [OK] [OK] [OK] > > 32, >
13 >
Connections and settings DMP-BDT220GNGCGAGW-VQT3V64.book 14 ページ ２０１２年２月６日 月曜日 午前９時５２分
STEP 6 : Reprogramming the remote control
For other Panasonic products
If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. (> 32, “Remote Control”)
For TV
You can operate the TV using the unit’s remote control.
1 Input the 2-digit code (> 39) while pressing [Í TV]. e.g., 01: [0] B [1] 2 Test by turning on the television.
≥ If your television brand has more than one code listed, select the one that allows correct operation.
14 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 15 ページ ２０１２年２月６日 月曜日 午前９時５２分 15ページ DMP-BDT220GNGCGAGW-VQT3V64.book and this may cause malfunction. cause may this and collide may withtray objects itwhen isopened, not Do place objects in front of the unit. The disc CAUTION ≥ ≥ ≥ ≥ Notes media Inserting orremoving Playback Camera. rearpanelthe is only thefor Communication porton USB HDD. The or aUSB memory USB a connect you when port front USB the Use equipment. connected details, to the therefer for instructions For equipment. connected the on displayed be may screen setup the cable, connection If youconnect a Panason theof cardand itpull out.straight the the SDcard, centre removing press When thefacing right wayup. inserting When a mediaitem, ensurethat it is ic product with a USB USB with a ic product Press [HOME]. menu HOME the To show 2 1 television. the on input video appropriate the and select Turn television on the Preparation menu. HOME the functions of Major this unit canbeoperated from HOME menu ≥ Videos/Photos/Music Network Setup Items to be displayed may vary with themedia. Items tobedisplayedmayvarywith Disc Home Network Home Service Network USB SD Card Player Settings Player Wallpaper Management SD Card ≥ item. [ Press [OK] or Press [ step. this repeat items, other are any If there Blu-ray DiscPlayer HOME Í ] to turn on the the on ] unit. turn to 1st user Register htsSetup Photos HOME menu. HOME of background the Changes (> (> Renderer Media ClientDLNA Connect. ( VIERA of screen Home the Displays ≥ (> contents. the back Play 3 of contents or the title. or the contentsof types the select recorded, multiple contentsWhen are , Network 18) 27) 17) Videos 4, 2 , 1 Music ] to select the the select ] to ( > VQT3V64 21) (> > 20) 22) 15
Playback Connections and settings DMP-BDT220GNGCGAGW-VQT3V64.book 16 ページ ２０１２年２月６日 月曜日 午前９時５２分
Multi User Mode Smartphone used as a remote control can be registered with Register Multi User Mode is a function that enables respect to each user. Smartphone switching of multiple settings easily. ≥ Multiple users cannot be Up to 4 people can use the unit with their own registered for one smartphone. settings. 4 Select “Confirm” and press [OK]. The following settings can be personalized. To change the personalized user information ≥ The user icon Select “Edit User Information” from Setup menu. ≥ The wallpaper of HOME menu (> 32) ≥ The audio and picture settings (> 24, 27) Switching the user
HOME A User 1 There are three ways to switch the user as Blu-ray Disc Player Network follows. ∫ Using coloured buttons Photos Setup Music Press the coloured buttons in the HOME menu to switch to the user corresponding to the Videos button. User 1 Register B 2nd user ∫ Using facial recognition A The user name and icon currently selected (Only when connected to Communication B Personalize a new user and switch the users Camera > 20) with coloured buttons. This is a function for fun using the Communication Camera and enables user switching by facial Personalizing a new user recognition. Perform “Create from Photos” (> left) to personalize your facial photo before using this 1 Press [HOME]. function. 2 Press a coloured button that indicates 1 Press [OPTION] in the HOME menu, select new user personalization. “Facial Recognition” and press [OK]. 3 Select an item and change the settings 2 Turn the face to Communication Camera. according to the indications. The camera captures your face and The following items can be set. determines the closest face from the personalized user photos, and then displays Input Personalize a user name. the results. Nickname ≥ Accuracy of the recognition may be Personalize a user icon. reduced depending on the captured image. Select from Illustrations Follow the indications on the screen. The image can be selected from 3 prepared illustrations. ≥ To redo the facial recognition, press [RETURN]. Create from Photos Select Icon If the Communication Camera is ∫ Using registered smartphones connected, you can shoot and When the unit is turned on using the personalize your photo. registered smartphone, the user who ≥ You can also select a photo in registered the smartphone will automatically recording media as an icon. be selected. (> 24, “Icon Registration”) ≥ Perform the “Remote Device Settings”. (> 30) Personalize a background of the HOME menu. ≥ To use smartphones as a remote control, installation of Select ≥ Other than prepared dedicated software is required. For more details, refer to Wallpaper wallpapers, you can also select the following website. a photo in recording media as a http://panasonic.jp/support/global/cs/ (This site is in English only.) wallpaper. (> 24, “Wallpaper”)
16 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 17 ページ ２０１２年２月６日 月曜日 午前９時５２分 17ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ ≥ Press [ Resume playfunction memorized. is position stopped The [ Press contents. media and the on depending work not may Following functions ≥ ≥ 2 1 Playback ≥ ≥ ≥ you press [ press you positionThe isclearedif tray the is openedor “STOP” on the unit’son the display.“STOP” resumeplayfunction does not work. discsOn BD-Video including the BD-J, displaying stillpictures,etc.). displaying back(suchaswhenpaused,displayingthemenu, playing not 30minuteswhen operation forabout isnobutton there Tosave onelectricity, off theunitis turned automaticallyif ( discs. or“PAL60”“NTSC” in“NTSCContentsOutput”forNTSC isoutputas“NTSC”or“PAL60”.discs You canselect Signal from PAL discsis asPAL.output SignalfromNTSC to the media. andpasted anddropped,copied havebeendragged which notpossibletoplaybackAVCHDIt is and MPEG2 video andMKV:DivX possible. Successiveplayisnot soon. and playback to protectthe unit’s motor, your television screen DISPLAYED. Press[ CONTINUETODISCS ROTATE ARE WHILEMENUS Operations during playback Repeat this if this Repeat procedure necessary. item play and pressthe to [OK]. Select media. on the startsdepending Playback media. the Insert Stop 1 ∫STOP]. > PLAY] position. this restart from to 27) ∫ STOP] several times to display ∫STOP] havefinished whenyou ≥ ≥ Slow-motion ≥ Search [SEARCH [SEARCH press playing, While ≥ [ Press Press [AUDIO]. Press ≥ ≥ paused, [ While press playing orWhile paused, press [ soundtrack language, language, soundtrack etc. You or number audio channel the change can to theSkip title, chapter or track. steps. 5 to up increases speed The While paused, [SEARCH While press [9 [SEARCH ≥ play. BD-Video andAVCHD: [ speed. BD-Video andAVCHD: [SEARCH step. Music The and MP3: is fixedspeed to a single Press [ Press Press [ Press backward. or forward succession in change holdto and Press speed. Press [ Press Search/Slow-motion Pause Changing audio Frame-by-frame Skip ]. ; ; 1 1 PAUSE]. 5 5 PAUSE] again or [ PLAY] to revert to normal playback PLAY] playback normal to revert to PLAY] to revert to normal playback PLAY] playback normal to revert to ]. ]. 2 ] ( 1] ( ) or [1 2;) or 1 ;1 PLAY]restart to 6 6 : ) only. VQT3V64 5 ] or ] or ] or ] or ] ] only.] (;1). 17
Playback DMP-BDT220GNGCGAGW-VQT3V64.book 18 ページ ２０１２年２月６日 月曜日 午前９時５２分
Displaying menus and playback Enjoying 3D video and photos information Preparation Connect 3D compatible TV to an HDMI AV OUT Show top menu/pop-up menu terminal of this unit using a High Speed HDMI Press [TOP MENU] or [POP-UP MENU]. Cable. (> 9, 10) Select the item and press [OK]. ≥ Perform the necessary preparations for the TV. ≥ Play back following the instructions displayed on the screen. Show the status messages ≥ 3D Settings (> 26, 29) While playing, press [STATUS]. The status messages give you information about ≥ Please refrain from viewing 3D images if you do not feel what is currently being played. Each time you well or are experiencing visual fatigue. press [STATUS], the display information may In the event that you experience dizziness, nausea, or change or will disappear from the screen. other discomfort while viewing 3D images, discontinue use and rest your eyes. ≥ Depending on media and contents, the display ≥ 3D video might not output the way it is set in “HDMI Video may change or may not appear. Format” or “24p Output” (> 27). ≥ When playing back 3D photos from “Photos” screen, select e.g., BD-Video from the “3D” list. (Still pictures in “2D” are played back in 2D.) If “2D” and “3D” indications are not displayed, press the red button to switch the view of playback contents. BD-Video Play Enjoying BD-Live
A T: Title, C: Chapter, PL: Playlist With “BD-Live” discs, you can enjoy bonus B Elapsed time in the title contents that use Internet access. C Current position For this BD-Live function, insertion of an SD card D Total time is necessary along with Internet connection. e.g., JPEG 1 Perform network connection and settings. (> 11, 12) Date 11.12.2007 Size 500 x 375 Insert an SD card with 1 GB or more free Manufacturer 2 Equipment space. ≥ The SD card is used as the local storage. 3 Insert the disc.
∫ Deleting data/Formatting SD cards Select “SD Card Management” in the HOME menu (> 15), then select “BD-Video Data Erase” or “Format SD Card” and press [OK].
≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website. ≥ “BD-Live Internet Access” may need to be changed for certain discs (> 31).
18 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 19 ページ ２０１２年２月６日 月曜日 午前９時５２分 19ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ ≥ 3 2 1 playback. the during settings various and make photos of slideshow a Play Soundtrack Random Folder Soundtrack Soundtrack Play Repeat Effect Transition Interval Slideshow Start has priority to be played back as background music. prioritytobeplayedbackasbackground has themusicCD musicareinsertedintothisunit, recorded back cannotbeplayed ” devicewith boththemusicCDandUSB When thisunit. with Still “ picturesdisplayed as Slideshow The followingThe items can be set. iteman Select and press green button. the “Photos”. Select media. the Insert random order.random is playedin music Background played. are files music the Select folderthe which from ≥ ≥ music. background Set towhether play slideshow. Set to whether repeat the pictures. Select effectthe whensliding Change the displayinterval. at a constant interval. the folder selected one by one You display pictures still can in Start the slideshow. SD card. SD slideshow ofthe on JPEG played backduringthe A music CD canalsobe the SDcard. deviceor on the JPEG USB of slideshow during the back played be can device USB WAV and MP3 FLAC, on the VQT3V64 19
Playback DMP-BDT220GNGCGAGW-VQT3V64.book 20 ページ ２０１２年２月６日 月曜日 午前９時５２分
VIERA Connect (Enjoying 1 Press [INTERNET]. Internet Service) ≥ The video communication service can be accessed directly by pressing [ ] button. VIERA Connect allows you to access some specific websites supported by Panasonic, and 2 Select the item and press [OK]. enjoy Internet contents such as photos, videos, etc. from VIERA Connect home screen. This unit has no full browser function and all features of To exit from VIERA Connect websites may not be available. Press [EXIT], [HOME] or [TOP MENU].
VIERA Connect provides a variety of ≥ When playing content in the media, VIERA Connect cannot selected Internet services such as the be accessed by pressing [INTERNET]. following. ≥ In the following cases, settings are possible using the Setup menu items. ≥ Online movie rental service – When restricting the use of VIERA Connect ≥ Video communication service (> 31, “Network Service Lock”) Video browsing service – When the audio is distorted ≥ (> 30, “Audio Auto Gain Control”) – When wrong time is displayed (> 30, “Time Zone”, “Summer Time”) ≥ If using slow Internet connection, the video may not be * displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended. XXX XXXX XXXXXXXX XXX XXXX ≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA Connect MORE BACK function. (> 13)
XXXXXXXXXXXXXXXX ≥ VIERA Connect Home screen is subject to change without Internet notice. ≥ The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. ≥ All features of websites or content of the service may not * Images are for illustration purposes, contents may change be available. without notice. ≥ Some content may be inappropriate for some viewers. ≥ Some content may only be available for specific countries Preparation and may be presented in specific languages. ≥ Network connection (> 11) ≥ Network setting (> 12)
To enjoy video communication (ex. SkypeTM) : ≥ Connect this unit with optional Communication Camera (TY-CC20W or TY-CC10W). Depending on your location, this optional camera may not be available. Please consult your local Panasonic dealer for advice.
Communication Camera TY-CC20W or TY-CC10W
≥ For operating method refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.)
20 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 21 ページ ２０１２年２月６日 月曜日 午前９時５２分 21ページ DMP-BDT220GNGCGAGW-VQT3V64.book 3 DIGA, to connected When When connected to other than DIGA, 1 Preparation (> to Refer ourwebsite about area,the etc.sales (DIGA). recorders in DLNA compatiblerecorded Panasonic Youphotos video and viewing the enjoy also can contents with this player. enjoy the and network, home your to connected etc.) installed, 7 smartphone, Windows DLNACertified the (PC with media server Youin stored andmusic videos share photos, can Home Network feature 3 2 DLNA server Playing back contents onthe 22) Register this unit to your DIGA. your to unit this Register connection network ( Perform the Windows Windows the Media the contentsAdd and folder to the libraries of equipment. connected the of settings Network Home Perform ( settings network ≥ etc. smartphone, libraries. in the contents thatarestored back onlythe Playlist of Windows Media Windows ofPlaylist Player > ® 12) of this unit. Player Player or the ® Playercan play > 11) and Server Press [EXIT], [HOME] or [TOP MENU]. To exit from Home Network Home from To exit 6 5 4 3 2 1 ≥ ≥ Select item the play and pressto [OK]. [OK]. press and equipment the Select ≥ ≥ Client”. Select “DLNA Network”. “Home Select “Network”. Select Press [HOME]. [RETURN] to hide Controlthe Panel. and press displayed, is not Panel the if Control [OK] starts.playback Press Control Panel( pressing [OPTION]. by content on the depending functions You maybeable to use convenient control. remote on the button green the pressing by Direct Wi-Fi to canbeswitched The method connection control. remote the button on The list the be updated can red by pressing > 25)
is displayed once the once is displayed VQT3V64 21
Playback DMP-BDT220GNGCGAGW-VQT3V64.book 22 ページ ２０１２年２月６日 月曜日 午前９時５２分
To exit from Media Renderer screen Using the Digital Media Controller Press [HOME].
You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit). For more details, refer to the following website and the operating instructions for each of the equipment. Possible applications: http://panasonic.jp/support/global/cs/ (This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature is only temporary, and the network connection method returns to the original setting when exiting. ≥ Depending on the contents and the connected equipment, * playback may not be possible. Server ≥ Items displayed in grey on the display cannot be played Renderer back by this unit. ≥ This unit can be played back via connected equipment only when controlled using DMC.
* Controller
Server * i Controller Renderer
* DMC compatible software should be installed.
Preparation Perform steps 1 and 2. (> 21) 3 Add the contents and folder to the libraries of the Windows Media® Player or the smartphone, etc. ≥ Playlist of Windows Media® Player can play back only the contents that are stored in the libraries. 4 Perform the “Remote Device Settings”. (> 30) ≥ You can register up to 16 devices. 1 Press [HOME]. 2 Select “Network”. 3 Select “Home Network”. 4 Select “Media Renderer”. 5 Select “Home Network” or “Wi-Fi Direct” and press [OK], then follow the indications on the screen. 6 Operate the DMC compatible devices.
22 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 23 ページ ２０１２年２月６日 月曜日 午前９時５２分 23ページ DMP-BDT220GNGCGAGW-VQT3V64.book – When anaction usesthe that When displayscreen is – playstarts When on the unit – turn on. automatically off, will television the is television the When displayed. will be unit this of screen andthe switched automatically be will television the of channel input the the When areperformed, following operations 3 2 1 Preparation Control™” “HDAVI Link VIERA (e.g., HOME menu) HOME (e.g., performed equipment for operational details. operational for equipment the operating instructions for connected See cable. HDMI an with equipment the You canthis use function by connecting Control”. “HDAVI TV (VIERA)orother device under of andoperations a this unit Panasonic the link will which function convenient Control” isa Link “HDAVI VIERA Control”? “HDAVI Link is VIERA What Power onlink Automatic inputswitching changed, repeat this procedure. or are settings connection the Also when properly. works function Control” “HDAVI that the so TV connected the on unit’s this channel input andselect equipment compatible Control” Turnon all“HDAVI TV). (e.g., equipment connected on the operations Control” “HDAVI the Set default setting(The is “On”.) ( “On” to Link” “VIERA Set > 32). 32). details. the the operating See instructions of TV more for playback andsettings.operations various perform can you control, remote TV the using By later Only when TV supports “HDAVI Control 2” or 1 Link. VIERA supports amplifier/receiver an and supports HDAVI that later (VIERA) 2 or Control TV a Panasonic to connected is unit the When television the off musicPlaying continuously evenafterturning off. television the switch offwhen you turns Control”, includingthis unit, automatically “HDAVI compatible with equipment connected All 2 ≥ ≥ ≥ ≥ ≥ equipment supporting VIERA Link function. equipment supportingVIERALink Please refertoindividualmanualsforothermanufacturers’ that supportsbeguaranteed. HDMICEC cannot such, itsmanufacturers’equipment operationwithother developedandadded.As unique functionthatwehave known as HDMICEC(ConsumerElectronicsControl),is a an industrystandardfunctions providedbyHDMIwhichis onthecontrol Control”,based VIERA Link“HDAVI Panasonic’s conventionalHDAVI equipment. compatible standard equipment.This iscompatiblewith Control November, 2011) forPanasonic’sHDAVI “HDAVI Control5”istheneweststandard(current asof This unitsupports “HDAVI 5”function. Control press certaintheTVremotecontrol. buttonson interruptedwhenyou The operationofthisunitmaybe the TV. on theTV. Fordetails, instructionsof refertothe operating forthisunitvarydepending The buttonsthatyoucanuse remote control remote VIERA with only control Easy link off Power Press [OPTION]. While playing music Select “TV Power” and press [OK]. and press Power” “TV Select VQT3V64 23
Playback DMP-BDT220GNGCGAGW-VQT3V64.book 24 ページ ２０１２年２月６日 月曜日 午前９時５２分
OptionSettings menu ∫ Repeat Play (Only when the elapsed time is being displayed A variety of playback operations and settings can on the unit’s display.) be performed from this menu. Select the item that you want to repeat. Available options differ depending on the playing ≥ The items displayed differ depending on the contents and the condition of the unit. type of media. About Multi User Mode ≥ Select “Off” to cancel. : Settings of the items with this indication are ∫ Random saved by the respective users registered in the Select whether or not to play random. HOME menu. Please refer to page 16 for details about user ∫ Start Slideshow registration and switching. Start the slideshow.
1 Press [OPTION]. ∫ Status ≥ When playing music, select “Playback Show the status messages. Settings” and press [OK]. ∫ Rotate RIGHT e.g., BD-Video ∫ Rotate LEFT Rotate the still picture.
Operation Menu Soundtrack ∫ Wallpaper Subtitle Angle Set the still picture to the wallpaper of HOME Repeat Play Off
Status menu. (> 15)
Primary Video
Secondary Video
Control Panel ∫ Icon Registration Top Menu Set the still picture as your user icon. (> 16) Pop-up Menu ∫ Video The recording method of original video appears. 2 Select an item and change the settings. ∫ Primary Video To exit the screen The recording method of original primary video Press [OPTION]. appears.
Regarding Language : (> 39) ∫ Secondary Video Operation Menu Select on/off of images. The recording method of original ∫ Soundtrack video appears. Video Show or change the soundtrack. ≥ During search/slow-motion or frame-by-frame, only the ∫ Audio channel primary video is displayed. Select the audio channel number. Select on/off of audio and the Soundtrack ∫ Subtitle language. Change the subtitle settings.
∫ Angle Select the number of the angle.
24 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 25 ページ ２０１２年２月６日 月曜日 午前９時５２分 25ページ DMP-BDT220GNGCGAGW-VQT3V64.book ≥ ≥ Specific picture quality ∫ ≥ the qualitySelect modeduringplay.picture ∫ (> to Settings” “Sound and Settings” “Picture Refer of unitthis from category.this You specialfeatures to enjoy settings canaccess Menu. Display ∫ Menu. Pop-up Display ∫ TopDisplay Menu. ∫ Panel. Control the hide to [RETURN] Press e.g., while Link, Playing back usingVIERA etc. Panel. Control the Display ∫ sections of the picture. the of sections that aroundcontrasting smudging appears blocknoiseand the Smoothes reduces NR: Integrated not operate. ( may is “24pOutput” to When set “On”, this function depth. of feeling greater a give the roughnoisein Reduces tothe background NR: 3D Adjustment”. “Picture youcan settings in If youselect change “User”, Picture Adjustment Adjustment Picture Mode Picture Menu Pop-up Menu Menu Top Control Panel Picture Settings Personal Taste 26) for more 26) for more details on eachsetting item. > settings can be performed. can settings 27) EXIT ≥ ≥ being played. material of type the suit to output progressive for conversion of method the Select ∫ AV from HDMI 1080p OUT. 1080i/ as when output and detailed images sharp ofto imagequality normal arecorrected Pictures ∫ picture The is sharp and detailed. ∫ quality. picture rich ahigh-resolution withsignals picture produces of chroma high-resolution HDMI processing The ∫ ≥ Return picture to picture thesettings Return factory preset. ∫ mode. screen the Switch ∫ 24p. output at are 24p at DVD-Video andother recordedon material Movies ∫ Output” ( Output” Only when youhaveselected “On” in “24p depending on the material be to played back. or “Film” “Video” either select selected, If the video isdisrupted is when “Auto” This may This with may not thework PAL contents. fields per second. rate of 60 Progressive Super Resolution Clarity Detail Process Chroma Reset to Default Picture Settings DefaultPicture Reset to Aspect Screen 24p > 27) and at a play discs recorded VQT3V64 25
Settings DMP-BDT220GNGCGAGW-VQT3V64.book 26 ページ ２０１２年２月６日 月曜日 午前９時５２分
Sound Settings 3D Settings
∫ Sound Effects*1, *2 These settings are also displayed by pressing Select the sound effect. []. ≥ Night Surround : ∫ Signal Format Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set Original Keep original picture format. in such a way that it can be heard easily. 3D picture format comprising Side by side ≥ Re-master : of left and right screens. This feature gives you brighter sound by Converts 2D pictures to 3D 2D to 3D increasing the high frequency portion of the effect. audio. (Discs recorded at 48 kHz or less) Recommended setting ∫ 3D Picture Mode Play back pictures with normal Re-master 1 Pop and rock Normal 3D effects. Re-master 2 Jazz You can enjoy 3D pictures with Re-master 3 Classical Soft a feeling of broadness, holding back the depth perception. ∫ Dialogue Enhancer*2 Play back 3D pictures with The volume of the centre channel is raised to Manual settings of “Manual Settings”. make dialog easier to hear. ∫ Manual Settings *1 Not every function can be set individually. *2 This function is effective for audio from the HDMI terminal Set the amount of depth Distance or the OPTICAL terminal only when “Digital Audio Output” perception. is set to “PCM” (> 28). (However, in this case, audio is output as 2ch from the OPTICAL terminal.) Selects how the screen Screen Type appears during 3D playback (flat or round). Set the amount of feathering at Frame Width the edge of screen. Set the colour of feathering at Frame Colour the edge of screen.
∫ Graphic Display Level (Only when “Full HD” is selected in “3D Type” (> 29).) 3D position for the Option menu or message screen, etc. can be adjusted during 3D playback.
26 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 27 ページ ２０１２年２月６日 月曜日 午前９時５２分 27ページ DMP-BDT220GNGCGAGW-VQT3V64.book ∫ Press [HOME]. To screen the exit ∫ ∫ ∫ ∫ 4 3 2 1 switching. and registration refer to Please page 16for details about user menu. HOME in bythe users registered respective the saved About Multi UserMode menus. both with Option the Youmenu. canget effect the same in items to the Some menuarecommon Setup standby.to unitthe switch you intact if even remain settings unit’s necessary. the if settings Change The Setup menu Picture Mode ( Mode Picture Super Resolution ( Super Resolution ( Clarity Detail ( Process Chroma ( Adjustment Picture : Settings of the items with this indication are are indication this with items the of Settings : Picture Select an item and change the settings. the change and item an Select Settings”. “Player Select [OK] select to Press “Setup”. [HOME]. Press Player Settings System Ratings Network Language 3D Sound Picture Seamless Play Still Mode NTSC ContentsOutput HDMI Output Super Resolution Detail Clarity Chroma Process Picture Adjustment Picture Mode > > 25) 25) > > > 25) 25) 25) Advanced Automatic Normal On Press [OK] to show the following settings: ∫ NTSC discs. NTSC PAL60playing Select when output NTSC or terminal.) OUT VIDEO the output from video for only works (This ∫ ≥ ≥ ≥ ≥ distorted. item without “ “ as screen on the are indicated devices connected the by supported items The ¾ TV that supports this function is connected. is function supportsthis thatTV output adjusting theto optimal whena method content, TVwill the Depending ontheplayback ¾ connected. is Deep Colour that supports a television when output Colour Deep to whether use selecting isfor This setting ¾ cable. HDMI an using connected is unitthe when signal image the of conversion This setting is for selecting colour-space ¾ ≥ 24p. at are output 24p at recorded material and other 1080/24p output using cable, an HDMI movies When this unit tois connected aTV supporting ¾ HDMI Output NTSC Contents Output film materials. the with inaccordance frames/second 24 in recorded contents are BD-Video movie Many film). (motion-picture per second frames of 24 a rate at recorded image progressive A 24p : played, images are output at 60p. are 24p than other images BD-Video When “On”. equipment must also be 1080p compatible. be 1080p also must equipment other the equipment, other through HDTV Television). If this unit tois connected an Definition (High HDTV 1080p compatible to 1080p, youneedto connect unitthe directly To to up-converted high-definition video enjoy selected. is automatically output toresolution the television connected suited best the selected, is If “Automatic” HDMI Video Format Contents Type Flag Output Colour Deep Mode HDMI Colour then Settings” set ( in “Picture “24p” and “On” to DVD-Video,set playing When 24p Output ¢ ” is selected, the imagesmaybe ¢ VQT3V64 ”. When When ”. any > 25) to 25) to 27
Settings DMP-BDT220GNGCGAGW-VQT3V64.book 28 ページ ２０１２年２月６日 月曜日 午前９時５２分
∫ Still Mode ¾BD-Video Secondary Audio Select the type of picture shown when you pause Select whether or not to mix the primary and playback. secondary audio (including the button click sound). Automatically selects the type Automatic If “Off” is selected, the unit outputs the primary of picture shown. audio only. Select if jittering occurs when Field “Automatic” is selected. ¾HDMI Audio Output This setting selects whether or not to output Select if small text or fine audio from HDMI. patterns cannot be seen Frame Select “Off” when the TV is connected to this clearly when “Automatic” is ≥ unit via an HDMI terminal, and this unit is also selected. connected to other devices, such as an ∫ Seamless Play amplifier/receiver via an OPTICAL terminal. The chapter segments in playlists are played ∫ PCM Down Conversion seamlessly. Select how to output audio with a sampling ≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists. frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. ≥ If “On” is selected, the signals that are Sound converted to 48 kHz are output. ≥ If “Off” is selected, and the connected ∫ Sound Effects (> 26) equipment does not support 96 kHz, the sound will not be output normally. ∫ Dialogue Enhancer (> 26) ≥ Signals are converted to 48 kHz despite the settings in the following cases: ∫ Dynamic Range Compression – when the signals have a sampling frequency You can listen at low volumes but still hear dialog of 192 kHz clearly. – when the disc has copy protection (Dolby Digital, Dolby Digital Plus and Dolby – when “BD-Video Secondary Audio” is set to TrueHD only) “On” ≥ “Automatic” is effective only when playing Dolby TrueHD. ∫ Downmix Select the downmix system of multi-channel to ∫ Digital Audio Output 2-channel sound. Press [OK] to show the following settings: ≥ Select “Surround encoded”, when the connected equipment supports the virtual ¾Dolby D/Dolby D +/Dolby TrueHD surround function. ¾DTS/DTS-HD ≥ There is no effect on “Bitstream” via HDMI AV ¾MPEG Audio OUT and DIGITAL AUDIO OUT. Select the audio signal to output. ≥ The audio will be output in “Stereo” in the Select “PCM”, when the connected ≥ following cases: equipment cannot decode the respective – AVCHD playback audio format. This unit decodes the audio – Playback of secondary audio (including the format and transmits to the connected button click sound). equipment. ≥ Not making the proper settings may result in noise.
28 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 29 ページ ２０１２年２月６日 月曜日 午前９時５２分 29ページ DMP-BDT220GNGCGAGW-VQT3V64.book ∫ ∫ software. video whenplaying screen 3D back the compatible toSet displayorhide the 3D viewingwarning ∫ ≥ ofthe theSelect format TV. connected ∫ 3D AVCHDof method output the videos. Select ∫ software. video compatible 3D of method playback the Select ∫ output. the of byadjusting delay audio time corrected is and sound picture between Synchronization ∫ when “Side by side” is selected. side” is by “Side when also TV on the 3D for settings the Change rpi ipa ee ( Level Display Graphic Settings Manual 3D Playback Message 3D Type 3D AVCHD Output 3D BD-Video Playback Audio Delay 3D
( > 26) > 26) ≥ ≥ the language Choose thefor subtitle. ∫ ≥ ≥ the language Choose audio. for ∫ messages. the language Choose menus and on-screen for ∫ [For[South[East[Asia] ≥ text. subtitles DivXorMKV for used a suitableSelect item to theaccording language ∫ [Except[South[East[Asia] ≥ the language Choose thefor discmenus. ∫ ¢¢¢¢ ¢¢¢¢ ¢¢¢¢ Enter Enter a code( automatically appear if available on that disc. available, subtitles that of language will not is Preference” “Soundtrack for selected language and the selected is If “Automatic” Enter a code( each disc will be selected. If the originallanguageof isselected, “Original” file. This item is displayedonlyafter playing back a Enter a code( Subtitle Preference Soundtrack Preference On-Screen Language Subtitle Text Preference Menu Language ”. ”. ”. > > > 39) when youselect “Other 39) when youselect “Other 39) 39) when youselect “Other 39) VQT3V64 29
Settings DMP-BDT220GNGCGAGW-VQT3V64.book 30 ページ ２０１２年２月６日 月曜日 午前９時５２分
¾Network Service Settings (> 20) Network (VIERA Connect) ∫ Easy Network Setting (> 12) Press [OK] to show the following settings:
∫ Network Settings Audio Auto Gain Control Perform network-related settings individually. Volume that is different depending on the contents is adjusted automatically to the Press [OK] to show the following settings: standard volume while using the VIERA ¾LAN Connection Mode Connect. Select the LAN connection method. ≥ Depending on contents, this function effect ≥ Select “Wireless Master” when you make a will not work. direct wireless connection between this unit ≥ Select “Off” when the audio is warped. and a Home Network device. Internet Time Zone connection is not available when this item is By selecting the time zone, it is possible to set selected. the unit’s time to match your location. ¾Wireless Settings ≥ Some VIERA Connect contents require the This allows the wireless router and connection time zone to be set. Set the time zone if settings to be set. Current connection settings necessary. and connection state can be checked. Summer Time Connection Setting Select “On” when using Daylight Saving time. The wireless router connection wizard will be displayed. [Except[South[East[Asia] ¾Network Drive Connection Double Speed Mode Setting (2.4GHz) It is possible to access the shared folder of When a 2.4 GHz wireless format is used, this equipment not compatible with DLNA, such as sets the connection speed. the Windows XP operating system, and play ≥ If you connect using the “Double Speed back video, still pictures, and music on this unit. Mode (40MHz)”, 2 channels use the same For the setting and operation method of frequency band, and there is consequently connected equipment, refer to the following a greater risk of reception interference. This Website. can cause the connection speed to drop or http://panasonic.jp/support/global/cs/ become unstable. (This site is in English only.) ¾IP Address / DNS Settings ¾Remote Device Settings (> 22) This is for checking the state of the network connection and setting the IP address and Press [OK] to show the following settings: DNS-related. Remote Device Operation Press [OK] to show the respective setting. Enable to operate by DMC. ¾Proxy Server Settings ≥ If “On” is selected, “Quick Start” is fixed to “On”. This is for checking the state of connection with the Proxy server and performing settings. Device Name Entry Press [OK] to show the respective setting. Set the name of this unit to be displayed on the connected equipment.
30 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 31 ページ ２０１２年２月６日 月曜日 午前９時５２分 31ページ DMP-BDT220GNGCGAGW-VQT3V64.book You settings. basic execute can ∫ You the can restrict usageofConnect. VIERA ∫ play. BD-Video of age limit an Set ∫ a Set level ratings limit to DVD-Video play. ∫ password. your forget Don’t password. same the use following items The ≥ are functions used. BD-Live You when access Internet restrict can ¾ Easy Setting Easy Network Service Lock BD-Video Ratings DVD-Video Ratings Ratings System have content owner certificates. content have which contents BD-Live only for permitted If “Limit”is selected, Internetaccessis Registration Type in “Registration Type”“Registration selected. in is when“Manual” be performed can equipment of theRegistering/deregistering displayed Remote Device List BD-Live Internet Access Internet ( BD-Live Automatic Manual accessing this unit.accessing the that equipment is individually connection for the of permission the Set this unit.accessing is that equipment the all to connection Allow > 18) Press [OK] to show the following settings: ∫ television and playing 4:3 ratio image: ratio 4:3 and playing television widescreen 16:9 a to connected When image: ratio playing 16:9 to When a 4:3connected television aspect and connected. television of type the match to Set ¾ automatically. messages status show to whether Choose ¾ ≥ ≥ This isto prevent burn-in on the screen. ¾ ≥ of the TV. connected the soit the Perform setup System matches TV ¾ 4:3 Pan & 4:3 Pan Scan 16:9 full 16:9 16:9 4:3 Letterbox TV Settings TV Aspect TV On-Screen Messages On-Screen available.is not While playing and pausing, this etc., function automatically. menu HOME to switches screen the minutes ormore, there isno foroperation 10 If a list of playback content is displayedand When thisset“On”: is to Screen Function Saver settings here. settings here. ( the of irrespective ContentsOutput”, “NTSC inthe specified format theinoutputted signal are they are played, contents NTSC When System TV > the picture. the of bottom and top the appear at bands Black Letterbox”. “4:3 as is output video BD-Video, playing When screen. the fills picture cut off sothe are sides The image. 16:9 horizontally stretched a as Videois displayed screen. the of centre in the image ratio 4:3 a as Videois displayed 27) VQT3V64 31
Settings DMP-BDT220GNGCGAGW-VQT3V64.book 32 ページ ２０１２年２月６日 月曜日 午前９時５２分
¾VIERA Link ∫ Firmware Update (> 13) Set to use “HDAVI Control” function when Press [OK] to show the following settings: connected via HDMI cable to a device that supports “HDAVI Control”. ¾Automatic Update Check ≥ Select “Off” when you do not want to use When this equipment remains connected to the “HDAVI Control”. Internet, it will check for the latest firmware version when it is turned on and you can update ∫ Unit Settings it if necessary. Press [OK] to show the following settings: ¾Update Now ¾Front Panel Display You can update the firmware manually if a Changes the brightness of the unit’s display. firmware update is available. ≥ If “Automatic” is selected, the display is set to bright and only dimmed during playback. ∫ System Information Press [OK] to show the following settings: ¾Edit User Information Change the user information registered in the ¾Software Licence HOME menu. Information about the software used by this unit is displayed. ∫ Quick Start Speed of startup from standby mode is increased. ¾Firmware Version Information ≥ When set to “On”, the internal control unit will be Display firmware version of this unit and powered and the idle power consumption will wireless LAN module. increase so compared to when set to “Off”. DivX Registration (About the power consumption > 40) ∫ You need this registration code to purchase and ∫ Remote Control play DivX Video-on-Demand (VOD) content. Change the remote control code if other Default Settings Panasonic products react to this remote control. ∫ This returns all values in the Setup menu and the Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.
32 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 33 ページ ２０１２年２月６日 月曜日 午前９時５２分 33ページ DMP-BDT220GNGCGAGW-VQT3V64.book The unitThe mayhaveaproblem. ∫ If still unable to theturn unit off, the disconnect – seconds. 3 hold [ and Press ∫ 3D discs. replacing when disturbance Image – search. during disturbance Image – sounds. rotating disc Regular – this unit: The following donot indicatea problem with instructions. for dealer your consult unresolved, remains problem the If checks. following requesting service,Before please perform the Troubleshooting guide Reference 3 2 1 certain ( movies. with discovered that are irregularities operating may be releasedtoupdates correct Firmware installed? firmware latest the have you Do the ACmainslead. the minute, then reconnect lead,AC waitmains 1 Cannot eject disc. control orfront panel buttons. Unit doesn’t respond to remote “00 RET” is displayedonthe unit’s display. – [ [OK] on the Press control remote or unit’s the display. on displayed or[ control [ press Repeatedly seconds. 5 than for time more at same control the remote yellow button andthe blue button onthe theWhile unit is off, and hold [OK], press the < OPEN/CLOSE] on the unit. the on OPEN/CLOSE] Í Í I nteui ni 0 FTO” is /I] onthe unit until “06 > /I] on the main unit for for unit main on the /I] 13) 1 ] (right) (right) on the remote ] ¾ To preset. factory the to return 3 2 1 ¾ preset. factory the To to all settings return ¾ ¾ TV is switchedon. the when displayed not is mode tuner TV The ¾ ¾ The remote control doesn’tworkproperly. ¾ TV is switched. This unit is turned off when the input for the General operation menu. ( menu. “Yes”Select Setup the in Settings” “Default in seconds. 3 [ or control the remote [OK]hold on and Press unit’son the display.displayed [ or control [ press Repeatedly unit’sthedisplay. on displayed is “00 RET” – seconds. 5 than for time more atsame control the remote yellow button andthe blue button onthe the [OK], and hold is off,unitthe press While follows: as unit the Reset changing the HDMI connection auto setting. or by terminal input a differentto HDMI cable HDMI the reconnecting by be prevented TV,the Depending on may phenomenon this “On”. the TV setting, when“Quick Start” isset to occur, may on phenomenon depending This ( control. remote remote thecontrol, codeon change the unit’s onthe displaywhenabutton ispressed If “SET different codes. The control remote unitand main areusing (> control. remote the in batteries Change the TV. the for details pleaseread operatingthe instructions (HDAVIFor Link later). or VIERA 4 Control This isa whenusing normal phenomenon < OPEN/CLOSE] on the unit for at leastat for unit on the OPEN/CLOSE] 4) > 32) /I] on the unit until “08 FIN” FIN” is Í/I] on the unit until “08 > 1 2 37) 32, ] (right) on the remote remote the on (right) ] ” is displayed on the is displayedonthe ” VQT3V64 33
Reference Settings DMP-BDT220GNGCGAGW-VQT3V64.book 34 ページ ２０１２年２月６日 月曜日 午前９時５２分
You have forgotten your ratings password. ¾ The unit and television are using different You want to cancel the ratings level. video systems. ¾ The ratings level returns to the factory preset. 1 While the unit is on, press and hold [OK], the 1 While the unit is on, press and hold [OK], the yellow button and the blue button on the yellow button and the blue button on the remote control at the same time for more than remote control at the same time for more than 5 seconds. 5 seconds. – “00 RET” is displayed on the unit’s display. – “00 RET” is displayed on the unit’s display. 2 Repeatedly press [1] (right) on the remote 2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “05 P/N” is control or [Í/I] on the unit until “03 VL” is displayed on the unit’s display. displayed on the unit’s display. 3 Press and hold [OK] on the remote control or 3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit for at least [< OPEN/CLOSE] on the unit. 3 seconds. The system switches from PAL to NTSC or This unit does not recognize the USB vice versa. connection correctly. ¾ The system used on the disc doesn’t match ¾ Disconnect and reconnect the USB cable. If it your television. still does not recognize the connection, turn – PAL discs cannot be correctly viewed on an this unit off and on again. NTSC television. ¾ USB devices may not be recognized by this – This unit can convert NTSC signals to unit when connected using the following : PAL60 for viewing on a PAL television – a USB hub (> 27, “NTSC Contents Output”). – a USB extension cable ¾ When “3D BD-Video Playback” in the Setup ¾ If you connect USB HDD to this unit, use the menu is set to “Automatic”, images may not USB cable that is supplied with the HDD. be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, Picture and select “2D Playback” in the setup screen The images from this unit do not appear on displayed when playing 3D discs. (> 29) the television. Picture is distorted. ¾ An incorrect resolution is selected in “HDMI Video Format”. Reset the setting as follows: 1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. – “00 RET” is displayed on the unit’s display. 2 Repeatedly press [1] (right) on the remote control or [Í/I] on the unit until “04 PRG” is displayed on the unit’s display. 3 Press and hold [OK] on the remote control or [< OPEN/CLOSE] on the unit for at least 3 seconds. Set the item again. (> 27) – When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Default Settings” and make proper settings. (> 32)
34 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 35 ページ ２０１２年２月６日 月曜日 午前９時５２分 35ページ DMP-BDT220GNGCGAGW-VQT3V64.book ¾ ¾ ¾ abnormal. is screen the of ratio aspect The screen. the A blackis band displayedaround the edge of ¾ is correctly as video 3D not output 2D. ¾ ¾ 3D video is not output. ¾ Video is not output inhigh-definition. ¾ ¾ ¾ Adjust the aspect setting on the television.the on setting aspect the Adjust with settings ofthe the TV. inaccordance back are played in3D enjoyed be can that and structure) screen side (2 by Side with titles have recorded that Discs BD-Video Playback”) (> properly.is set Aspect” “TV the Confirm ( discs. 3D playing when displayed in “2DPlayback” the screen setup select and menu, Setup the in play” before “Set Select TV? ( between connected unitthis receiver a and there Is a non-3Dcompatible amplifier/ ( format. TV connected the required by as settings the Change properly.set is menu Setup ( that Video “HDMI Confirm Format” in the correct? ( theAre settings onthis unit and TV the 3D setting onthe3D TV. the Check etc. resolution in changes to due video 2D to switch might back played being on theDepending TV, connected the video this between unit andTV on? that the Is amplifier/receiver is connected 31) > 10) > 18) > 29, “3D 29, Type”) > 27) > 29, “3D ¾ ¾ the audio type. hear desired Cannot ¾ Cannot switch audio. Audio “On” “On” in the menu. Setup ( an cable, HDMI AudioOutput” “HDMI set to To with connected adevice audiofrom output ( settings. Output” Check the and connections the “Digital Audio Audio Output” to “PCM”.( Output”set“Digital to“Bitstream”. is Set “Digitalaudio if Audiothe switch cannot you an terminal OPTICAL or anHDMI terminal, anamplifier/receiver When using connecting > 0,28) , 10 > > 28) 28) VQT3V64 35
Reference DMP-BDT220GNGCGAGW-VQT3V64.book 36 ページ ２０１２年２月６日 月曜日 午前９時５２分
Playback Network
Disc cannot be played. I can’t connect to the network. ¾ The disc is dirty. (> 4) ¾ Confirm the network connection and settings. (> 11, 12, 30) Still pictures (JPEG) do not play back ¾ Check the operating instructions for each normally. device and connect accordingly. ¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played When using wireless LAN connection, video back. from the DLNA Certified media server is not played back or video frames are dropped I can’t play back BD-Live. during playback. ¾ The SD card is write-protected. (> 7) ¾ Higher transfer rate router such as 802.11n ¾ Confirm that this unit is connected to the (2.4 GHz) wireless router may solve the broadband Internet. (> 11) problem. If you use 802.11n (2.4 GHz) ¾ Confirm the “BD-Live Internet Access” wireless router, it is necessary to set the settings. (> 31) encryption type to “AES”. ¾ Confirm an SD card is inserted into the SD Simultaneous use with a microwave, cordless card slot. (> 15) telephone etc. at 2.4 GHz may result in connection interruptions or other problems. ¾ On the “Wireless Settings” screen (> 30), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network Setting” (> 12) again.
36 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 37 ページ ２０１２年２月６日 月曜日 午前９時５２分 37ページ DMP-BDT220GNGCGAGW-VQT3V64.book ¾ changea to higher setting. to recommended is It setting. security network The wireless accesspoint currently has a low ¾ addressIP is not set. ¾ $ ¾ disc inserted. No ¾ ¾ Cannot play onthis unit. ¾ Cannot play. on the appear orunit’sTV display. may or numbers following The service messages Messages On the television This operation is operationis This not available. devices. compatible DLNA from etc., video, back Encryption is requiredwhenplayingused. instructions wireless the being the to router of details, refer For reasons. safety for encrypt toto set “Noencryption”. It is recommended is type encryption or the system”, “Open to isset LAN the for type wireless Authentication ifacquisition necessary.) t (Select Address”. “Gateway and Mask”, “Subnet Address”, the “IP ---”. Set ---. is“---. ---. Settings” / DNS in Address “IP “IP Address” The example; For unit. bythe areunsupported operations Some discmay be upsideThe down. card. the re-insert and displayed not is unit’son the display “SD” Confirm You totried play a non-compatible image. You anincompatibleinserted disc. – BD-Video: During playback, reverse reverse playback, During BD-Video: – not possible. not is frame-by-frame reverse or slow-motion he automatic address address he automatic ¾ READNo ¾ No PLAY ¾ NET ¾ HDMI ONLY ¾ F99 ¾ U59 ¾ (“ SET ¾ REMOVE ¾ PLEASE WAIT On the unit’s display for more than 5 seconds. 5 than more for time same the button at the indicated number and [OK] andhold Press unit cannot play. The isdirty media orbadly The scratched. or DVD-Video. ( BD-Video a on restriction a viewing is There While connecting a to network. HDMI. beoutput with canonly BD-Video discs Some unit to standby, then back switch on. the switch to seconds 3 for unit main on the The unit fails to operate properly. [ Press installingunit. the Select a position with goodventilation when disappears. message until the minutes Waitreasons. for about 30 The unit to switches standby for safety The unit is hot. control. remote the on code the different Change codes. The control remote unitand main areusing device. USB the Remove power. much too is drawing device USB The WAIT”unit while is “PLEASE displayed. is not Youa malfunction. cannot theoperate This process. internal out is carrying unitThe ” stands for a number.) > 31) VQT3V64 Í/I] 37
Reference DMP-BDT220GNGCGAGW-VQT3V64.book 38 ページ ２０１２年２月６日 月曜日 午前９時５２分
H or F (“ ” stands for a number.) Restriction on use of ¾ There is something unusual. unauthorized copied content ¾ Check the unit using the troubleshooting guide. If the service number remains This unit adopts the following technology for displayed, do the following. copyright protection. 1 Disconnect the plug from the household mains socket, wait a few seconds, then Cinavia Notice reconnect it. This product uses Cinavia technology to limit 2 Press [Í/I] to turn the unit on. the use of unauthorized copies of some If the service number remains displayed despite commercially-produced film and videos and doing the above, request service from the dealer. their soundtracks. When a prohibited use of an Inform the dealer of the service number when unauthorized copy is detected, a message will requesting service. be displayed and playback or copying will be interrupted. START ¾ The system is being restarted during the More information about Cinavia technology is firmware update. Please do not turn off the provided at the Cinavia Online Consumer unit. Information Center at http://www.cinavia.com. To request additional information about Cinavia UPD/ by mail, send a postcard with your mailing (“ ” stands for a number.) address to: ¾ The firmware is being updated. Cinavia Consumer Information Center, P.O. Please do not turn off the unit. Box 86851, San Diego, CA, 92138, USA.
FINISH ¾ The firmware update is complete.
38 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 39 ページ ２０１２年２月６日 月曜日 午前９時５２分 39ページ DMP-BDT220GNGCGAGW-VQT3V64.book ∫ ∫ information Supplemental Display ISBSI05/19/20/47 07/46 MITSUBISHI METZ MAG LOEWE LG KONKA KOLIN KDS JVC MIVAR 30 05/22/23/40/41 09 ITT 36 IRRADIO 05 HITACHI 05/50/51 GRUNDIG 53 21 GRADIENTE GOODMANS GOLDSTAR FUNAI 05 10/34 FUJITSU FISHER 05 FINLUX 64/65 05 FERGUSON ELEMIS 66 DUAL DESMET 10/15 DAEWOO CURTIS 27/30 CENTREX BUSH BRANDT BENQ 01/02/03/04 BEKO AKAI AIWA Panasonic RUS POR DAN NOR SVE NLD ESP ITA DEU FRA ENG Brand TV code list Display languages list Russian Portuguese Danish Norwegian Swedish Dutch Spanish Italian German French English Language 24 58/59 05/71/72/73/74 52 05/50/51 45 52 17/30/39/70 62 25 61 35 05/28/79 05 63/67 05 TV Code TV Display FIN HUN SLK CES POL THA VIE MAL KOR CHI JPN Finnish Hungarian Slovak Czech Polish Thai Vietnamese Malay Korean Chinese Japanese Language AM A18/ 1 /4 8 1 16/57 HA MA YA 52 10/15/44 WESTINGHOUSE WHITE TOSHIBA THOMSON 10/11/12/13/14 TEVION 05 09 TELEFUNKEN TCL 05/25 SONY SINUDYNE SIEMENS SHARP 05/29/30 05 SELECO SEG 26 32/42/43/65/68 SCHNEIDER SANYO 05 SANSUI SAMSUNG SALORA 52 37/38 SABA RADIOLA 05 05/06/46 41/48/64 PYE PROVIEW PIONEER 33 PHONOLA PHILIPS 45 PHILCO PEONY NOKIA ORION NOBLEX 10 ONWA NEC OLEVIA NORDMENDE Brand Display TUR GRE RUM BUL MRI IND PER HIN ARA 05 08 05/69/75/76/77/78 10 05 25/26/27/60/61 05 36 31/33/66/67/69 21/54/55/56 18 49/69 30/39/70 TV Code Others Turkish Greek Romanian Bulgarian Maori Indonesian Persian Hindi Arabic Language ∫ Language urn:7178 6976 7576 6869 Guarani: Greenlandic: 7565 7176 Greek: 7089 German: 7082 Georgian: 7073 Galician: Frisian: 7079 French: Finnish: 6984 Fiji: 6978 6979 7876 Faroese: Estonian: 6865 6783 Esperanto: English: 7282 Dutch: 6779 Danish: 9072 Czech: 6765 Croatian: Corsican: Chinese: Catalan: fr 6565 8381 6570 Amharic Albanian: Afrikaans: Afar: 6566 Abkhazian abda:7577 7789 6669 6682 Cambodian: 6671 6672 Byelorussian: Burmese: 6890 Bulgarian: Breton: Bihari: 6985 Bhutani: 6665 Bengali; Bangla: 6589 6590 Basque: Bashkir: 6583 6582 Azerbaijani: 7289 Aymara: Assamese: Armenian: Arabic: Language code list : Code 6577 7074 6678 Language ucu:8185 8065 8076 Quechua: 8084 7065 Punjabi: 7982 Portuguese: Polish: 7869 Persian: 8083 7865 7879 Pashto, Pushto: Oriya: Norwegian: 7778 Nepali: 7782 7773 7779 Nauru: Mongolian: 7784 Moldavian: 7783 Marathi: 7776 Maori: Maltese: 7771 Malayalam: Malay: 7678 7775 7684 Malagasy: Macedonian: Lithuanian: Lingala: ai:7665 7679 7585 7686 Latvian, Lettish: 7579 Latin: 7589 Laotian: 7575 Kurdish: 7583 Korean: 7578 Kirghiz: Kazakh: 7487 7384 Kashmiri: 7465 Kannada: Javanese: Japanese: 7365 Italian: 7378 7383 Irish: 7273 Interlingua: 7285 Indonesian: 7387 7265 Icelandic: Hungarian: 7185 Hindi: Hebrew: Hausa: Gujarati: Code 7165 Language irna 8473 6679 T 8469 8484 Tigrinya: 8465 Tibetan: Thai: Telugu: Tatar: Tamil: oua 8979 7473 8872 8779 Zulu: 6789 Yoruba: Yiddish: 8679 Xhosa: 8590 Wolof: 8582 Welsh: 8673 Volapük: Vietnamese: 8575 Uzbek: Urdu: 8475 8482 Ukrainian: Twi: Turkmen: Turkish: aao:8476 8386 8387 Tajik: Tagalog: 6983 Swedish: 8385 8379 Swahili: Sundanese: 8375 8376 Spanish: 8368 Somali: 8378 8373 Slovenian: Slovak: Singhalese: 8382 Sindhi: Shona: 8365 8372 Serbo-Croatian: 7168 8377 Serbian: 8285 Gaelic: Scots Sanskrit: 8279 Samoan: Russian: Romanian: Rhaeto-Romance: na 8479 onga: VQT3V64 Code 8472 9085 8277 8487 8471 39
Reference DMP-BDT220GNGCGAGW-VQT3V64.book 40 ページ ２０１２年２月６日 月曜日 午前９時５２分
Specifications File format Signal system PAL/NTSC File format Extension Reference Operating temperature i5 oC to i35 oC range This unit supports ID3 tags, but only titles, Operating humidity 10 % to 80 % RH (no MP3 “.MP3”, “.mp3” artist names and album range condensation) names can be displayed. Video output Output level: 1.0 Vp-p (75 ≠) Output connector: Pin jack ≥ MOTION JPEG and (1 system) Progressive JPEG are not supported. Audio output Output level: 2 Vrms (1 kHz, ≥ You may not be able 0dB) JPEG “.JPG”, “.jpg” to play back the file if Output connector: Pin jack you have edited the Number of connectors: folder structure or 2 channel the file name on a 1 system PC or other device. Digital audio output Optical digital output (Optical “.DIVX”, “.divx”, “.AVI”, ≥ [Except[South[East[Asia] terminal) “.avi” The video file and subtitles text file are [Except[South[East[Asia] HDMI AV output Output connector: Type A DivX inside the same Subtitles text file (19 pin) 1 system folder, and the file “.SRT”, “.srt”, “.SUB”, names are the same SD card slot 1 system “.sub”, “.TXT”, “.txt” except for the file USB slot USB2.0 “.MKV”, “.mkv” extensions. ≥ Some DivX and 2 system [Except[South[East[Asia] MKV file may not Subtitles text file Ethernet 10BASE-T/100BASE-TX MKV play back, “.SRT”, “.srt”, “.SSA”, 1 system depending on the “.ssa”, “.ASS”, “.ass” Wireless LAN Standard Compliance: video resolution and IEEE802.11 b/g/n frame rate condition. Maximum sampling Frequency range: 2.4 GHz FLAC “.flac” band rate: 192 kHz/24 bit
TM TM Maximum sampling Security: WPA /WPA2 WAV “.wav” (Encryption Type: TKIP/AES, rate: 48 kHz/16 bit Authentication Type: PSK), MPO “.mpo” 3D still picture WEP (64 bit/128 bit) ≥ With certain recording states and folder structures, the play LASER Specification Class 1 LASER Product order may differ or playback may not be possible. Wave length: 790 nm (CDs)/ 660 nm (DVDs)/405 nm (BDs) Laser power: No hazardous radiation is emitted with the safety protection Power supply [For[Australia[and[New[Zealand] AC 220 to 240 V, 50 Hz [Except[Australia[and[New[Zealand] AC 220 to 240 V, 50 Hz/60 Hz
Power consumption Approx. 9.9 W Power consumption in Approx. 0.1 W standby mode Power consumption in Approx. 3.2 W quick start standby mode Dimensions (WkHkD) 430 mmk38 mmk185 mm Including the projecting parts Mass Approx. 1.5 kg ≥ Specifications are subject to change without notice.
40 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 41 ページ ２０１２年２月６日 月曜日 午前９時５２分 41ページ DMP-BDT220GNGCGAGW-VQT3V64.book *3 *2 *1 ≥ Output) ( unit. the on settings the and to are connected terminals the amplifier/receiver, audio The output differs depending on which OPTICAL depending ontheDTS,Inc.specifications. depending or6.1chto7.1ch audiooutputisamplifiedfrom5.1ch The PCM. is5.1ch maximumpossiblenumberofDolbysound The PCM. or 5.1ch audio will beoutput as DolbyDigital,DTSDigital Surround “BD-Videoset to“On”,the When SecondaryAudio”is receiver compatibleaudioformat. receiver withtherespective connected toamplifier/ ofoutputchannelswhen number maximumpossible numberofchannelslistedisthe The HDMI AVHDMI Terminal Audio information OUT audio Outputs usingoriginal DTS DigitalSurround Digital/ Dolby “Bitstream” *1 “Digital AudioOutput” > PCM Down-mixed 2ch 5.1ch PCM DVD-Video : 7.1ch PCM BD-Video : 28, Digital28, Audio “PCM” *1*2*3 ≥ ≥ unit. this of disuse or use failure obeythese to limits, orto anycondition of incidental damagewhichmayarisedueto a any for responsible be way will inno Panasonic limits before using this unit. of thisusage unit. You be awareofmust these followingThe limits arein placeregardingthe connection LAN Precautionswireless of – Do not disassemble or alter this unit in any in unit this alter or disassemble not Do – Keep this unit moisture. awayfrom – strong to unit this or subject bend, not Do – Do thisnot unitexpose to high temperatures – points: following the and follow intended was Please usethis unit in in the manner which it components. contains electronic unit This delicate waves may be andintercepted monitored. Data transmitted and received over radio way. impacts. sunlight. or direct VQT3V64 41
Reference DMP-BDT220GNGCGAGW-VQT3V64.book 42 ページ ２０１２年２月６日 月曜日 午前９時５２分
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Connect is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
42 VQT3V64 DMP-BDT220GNGCGAGW-VQT3V64.book 43 ページ ２０１２年２月６日 月曜日 午前９時５２分 43ページ DMP-BDT220GNGCGAGW-VQT3V64.book worldwide patentsissuedandpendingunderlicensefromVeranceCorporation.Allrightsreserved. Copyright 2004-2010VeranceCorporation.Cinavia Skype, associatedtrademarksandlogosthe“”logoareofSkypeLimited. Windows isatrademarkorregisteredofMicrosoftCorporationintheUnitedStatesandothercountries. Alliance. DLNA, theDLNALogoandCERTIFIEDaretrademarks,servicemarks,orcertificationmarksofDigitalLivingNetwork The software licenses are displayed when “Software Licence” in the Setup menu is selected. ( Vorbis, FLAC, WPA Supplicant(2) technology outside of this product is prohibited without a li This product is protected by certain intellectual property rights ofMicrosoft Corporation and third parties. Use or distributi MS/WMA (1) The Independent JPEG Group's JPEG software. 4. FreeType code. 3. This product includes software developed bythe University ofCalifornia, Berkeley and its contributors. 2. This product includes software developed bythe OpenSSL Project for usein the OpenSSL Toolkit. 1. For the software categorized as(5) includes asfollows. http://panasonic.net/avc/oss/bdplayer/AWBPP12.html Source code is also freely available to youand any other member of the public via our website below. [email protected] Contact Information v2.1. v2/LGPL copy ofthe corresponding source codecovered under GPL provided below, for acharge nomore than our cost ofphysically performing source code distribution, a complete machine-readab At least three (3) years from delivery of products, give Panasonic anywill to third party who contacts us theat contact infor MERCHANTABILITY APARTICULAR of warranty FOR or FITNESS PURPOSE. The GPL/LGPL software isdistributed in thehope that itwillbeuseful, but WITHOUT ANY WARRANTY, without even the implied http://panasonic.net/avc/oss/bdplayer/AWBPP12.html individuals at In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright noti http://www.gnu.org/licenses/ http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and v2.1, as the case maybe at For the software v2 and categorized LGPL as(3) and (4), please refer to the terms andconditions of GPL v2.1 v2 opensourced and/or LGPL software other than the software licensed(5) under the GPL v2.1) and/or, the software (LGPL 2.1 licensed under the GNU LESSER General Public(4) License, Version v2), the software 2(GPL licensed under the GNU General Public License,(3) Version the software owned bythird party and licensed to Panasonic(2) Corporation, the software developed independently byor forPanasonic(1) Corporation, This product incorporates thefollowing software: (http://www.openssl.org/) old-licenses/lgpl-2.1.html. TM isaVeranceCorporationtrademark.ProtectedbyU.S.Patent7,369,677and cense from Microsoft or an authorized Microsoft subsidiary. > 32) VQT3V64 on of such on of mation ce ofthosece 43 le le
Reference DMP-BDT220GNGCGAGW-VQT3V64.book 44 ページ ２０１２年２月６日 月曜日 午前９時５２分
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
(Inside of product)
Panasonic Corporation p Web Site: http://panasonic.net
C Panasonic Corporation 2012 VQT3V64 F0212ST0