DOCSLIB.ORG

Quick Start Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Quick Start Guide Go to www.vtechphones.com Important safety instructions What’s in the box VM3254 The applied nameplate is located at the bottom of the 17. Never push objects of any kind into this product 1 Connect the baby monitor (cont’d) 3 Positioning the baby monitor to register your product for enhanced baby unit’s base. through the slots because they may touch dangerous VM3254-2 When using your equipment, basic safety precautions voltage points or create a short circuit. Never spill liquid warranty support and the latest VTech should always be followed to reduce the risk of fire, of any kind on the product. Caution electric shock and injury, including the following: 18. To reduce the risk of electric shock, do not Charge the parent unit battery • Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the product news. disassemble this product, but take it to an authorized Video Baby Monitor 1. Follow all warnings and instructions marked on the service facility. Opening or removing parts of the When you have connected and turned on the parent unit, the battery will be charged baby’s crib or playpen. product. product other than specified access doors may 2. Adult setup is required. expose you to dangerous voltages or other risks. automatically. 3. CAUTION: Do not install the baby unit at a height Incorrect reassembling can cause electric shock above 2 meters. when the product is subsequently used. NNotesOTES e t i u e q e r s e c o o c u n p N n a o . a l r c a c a n l s o t c l a i a a r . N a ó l p s . es s b i a l i p o z e e t o c e m e e d b r m r n á d t i e l t a a e e t d s r a t a d l e e r e n n t n m r L i e i e l t . u u u o t o o e o f s u . e n b o n t f N m t t n e e a ó m g l n s f i 4. This product is not a substitute for adult supervision of the . o o e c n o s a e r e me . b u s 19. You should test the sound reception every time you ng i f n D e d n a a a g d e ee t . n , p l e t e e e o o a r i n s s c à e e t t e l i s E h h o r e e D c r x u n s u l e t t . c n l . r e t e e R s s q t m t e a i v d e q o e s r d a o st t r i t s u t . ng i o f o a n e ñ l o a e n o i e l o n e ñ h d t is c u t r i g e l a d a o a n a n c t t t r f t n n e s d r n t t n a a e s R r e n l a e a a l o o e t e u a t s i m e e o los r c p e s q t n d c d f i é i z l u o n e z . b n a ’ t i l o e o u d g e é • Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When ’ h a c o t se g M t d a d i t c e l t u z x d i t n s s e t e n e t H o s i o d d u e n ’ n h t d h d e a c e g r r i t i N e a r o o p o m e n h l c c t t v o É i d s o i r S fr w h o y infant. Supervising the infant is the parent’s or caregiver’s m t c a turn on the units or move one of the components. e e s r p e w u e h a e T responsibility. This product could cease operating, and 20. Periodically examine all components for damage. K the parent unit battery is fully charged, the battery icon becomes solid . therefore you should not assume it will continue working properly for any given period of time. Further, this is not 21. There is a very low risk of privacy loss when using • It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, a medical device and should not be used as such. This certain electronic devices, such as baby monitors, turn the parent unit off while charging. product is intended to assist you in supervising your baby. cordless telephones, etc. To protect your privacy, make sure the product has never been used before • The standby time varies depending on the sensitivity level you set, your actual use and the age of 5. Do not use this product near water. For example, do purchase, reset the baby monitor periodically by 1 set for VM3254 not use it next to a bath tub, wash bowl, kitchen sink, powering off and then powering on the units, and 2 sets for VM3254-2 the battery. laundry tub or swimming pool, or in a wet basement power off the baby monitor if you will not use it for or shower. some time. The battery icon indicates the battery status (see the following table). 6. CAUTION: Use only the battery provided. There may be a 22. Children should be supervised to ensure that they do risk of explosion if a wrong type of battery is used for the not play with the product. parent unit. The battery cannot be subjected to high or low 23. The product is not intended for use by persons Battery indicators Battery status Action For more support information extreme temperature and low air pressure at high altitude (including children) with reduced physical, sensory during use, storage or transportation. Disposal of battery or mental capabilities, or lack of experience and Quick start guide e t ui e q e r s e c o o o c u n p N n a o . a l c l a c ar n l The battery has very little Charge without interruption (about s o a t c i a a r . N ó la es s p . a s b i l i p o z e e t o c e m e d b r m r n d t i e lá t a e e t s r a t a d la e e r e n t m r t r mechanically crushing or cutting or L i n into fire or a hot oven, o i e le t t . u u o o de o e o f en s u . e b o f n t N m t n e e a ón g t l n s s m f i . o c e o n o s a e e r . b u s u ng The screen displays . i f n D e e e d n a a a g d t ee , n . p e em e c e o o a l knowledge, unless they have been given supervision or i r n s à e e t t et l i s Es h h o r e e c D r x n s u l e t t . c n l . r e t e e R q t t f e a i v d e im qu o es r s d a s o t r t u t . i o o n e ñ s l a o e n os i e o l n est ñ ea d h t i c u t r i g l d ang a o n a a n c t t t r f n t n e s d r n n a a e s R r n e l a e a at at l o o e e u a t s m i e e o s o l r c p e q s t n d d f i ét i z c l u o n e z b . a ’ t i l o e o u e d g é en ’ a c o t s g M d t a d i t h c d e e l z t u x i t n s s e t e n e t H o s o d h u e n ’ n t d d ed i h a c e g r i t a i N e o or the battery can result in an explosion.
Load more

Recommended publications
  • Staff Briefing Package
    Staff Briefing Package Crib Bumpers Petition May 15, 2013 Table of Contents Briefing Memo ............................................................................................................................... iii TAB A: Epidemiology Memorandum .......................................................................................... 11 TAB B: Engineering Memorandum .............................................................................................. 18 TAB C: Economics Memorandum ............................................................................................... 23 TAB D: Compliance Memorandum .............................................................................................. 27 TAB E: Health Sciences Memorandum ........................................................................................ 29 TAB F: Project Manager, Infant Suffocation Project (1992-1995) Memorandum ...................... 78 TAB G: Advice from Other Agencies ........................................................................................ 106 ii Briefing Memo iii UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION 4330 EAST WEST HIGHWAY BETHESDA, MARYLAND 20814 Memorandum Date: May 15, 2013 TO: The Commission Todd A. Stevenson, Secretary THROUGH: Stephanie Tsacoumis, General Counsel Kenneth R. Hinson, Executive Director FROM: DeWane Ray, Assistant Executive Director Office of Hazard Identification and Reduction Jonathan Midgett, PhD, Children’s Hazards Team Leader Office of Hazard Identification and Reduction SUBJECT:
    [Show full text]
  • DESIGN and DEVELOPMENT of WIRELESS BABY MONITORS Eric
    DESIGN AND DEVELOPMENT OF WIRELESS BABY MONITORS By Eric Yi-Kuo Jen B.A.Sc., Simon Fraser University, 2002 A PROJECT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF ENGINEERING in the School of Engineering Science © Eric Yi-Kuo Jen, 2008 SIMON FRASER UNIVERSITY SUMMER 2008 All rights reserved. This work may not be reproduced in whole or in part, by photocopy or other means, without the permission of the author. SIMON FRASER UNIVERSITY LIBRARY Declaration of Partial Copyright Licence The author, whose copyright is declared on the title page of this work, has granted to Simon Fraser University the right to lend this thesis, project or extended essay to users of the Simon Fraser University Library, and to make partial or single copies only for such users or in response to a request from the library of any other university, or other educational institution, on its own behalf or for one of its users. The author has further granted permission to Simon Fraser University to keep or make a digital copy for use in its circulating collection (currently available to the public at the "Institutional Repository" link of the SFU Library website <www.lib.sfu.ca> at: <http://ir.lib.sfu.ca/handle/1892/112>) and, without changing the content, to translate the thesis/project or extended essays, if technically possible, to any medium or format for the purpose of preservation of the digital work. The author has further agreed that permission for multiple copying of this work for scholarly purposes may be granted by either the author or the Dean of Graduate Studies.
    [Show full text]
  • Installation Guide 1 • Flashes Red Slowly During Video Is Lost
    Go to www.vtechphones.com RM5864HD Overview to register your product for What’s in the box enhanced warranty support and 5-inch Smart Wi-Fi 1080p Camera unit overview Parent unit overview latest VTech product news. Your HD video monitor package contains the following items. Save your sales receipt and Pan and Tilt Monitor original packaging in the event warranty service is necessary. 1 Light sensor 1 9 1 2 Camera lens 2 3 Microphone 3 2 4 7 10 14 4 3 4 Infrared LEDs 5 10 • Allow you to see clearly in a dark surrounding. 6 11 7 11 12 5 LED indicator 5 8 15 • Red is steady on when the camera unit is 13 6 8 9 connecting to the parent unit directly in local mode. 1 LINK LED light 6 Arrow keys • Green is steady on when the camera unit • On when the parent unit is linked to the , , or and parent unit are connecting to your camera unit. • Press to navigate leftward, upward, home Wi-Fi network via the Wi-Fi router. • Flashes when the link to the camera unit rightward or downward, within the 9 main menu and submenus. Installation guide 1 • Flashes red slowly during video is lost. streaming in local mode. • While viewing image from the 2 4 7 2 LED light camera unit, press to pan the camera • Flashes green slowly10 during video • On when the parent unit is connected unit leftward, upward, rightward or Installation guide Quick start guide Important safety 3 downward. instructions streaming via home Wi-Fi network.
    [Show full text]
  • For Fosbaby P1)
    UUsseerr MMaannuuaall Wireless HD Baby Monitor FosBaby FosBaby P1 V2.1 Table of Contents Security Warning...................................................................................................................................................................1 1 Overview.......................................................................................................................................................................... 1 1.1 Key Features........................................................................................................................................................1 1.2 Read Before Use.................................................................................................................................................2 1.3 Package Contents...............................................................................................................................................2 1.4 Physical Description........................................................................................................................................... 2 1.5 Micro-SD Card..................................................................................................................................................... 4 1.6 Hardware Installation..........................................................................................................................................5 2 Access the Camera.......................................................................................................................................................
    [Show full text]
  • Section 3 Sources of Radiofrequency Electromagnetic Fields
    Section 3 Sources of Radiofrequency Electromagnetic Fields Table of Contents 3.1 Radiofrequency Electromagnetic Waves ........................................................................... 23 What Is a Radiofrequency (RF) Wave? .................................................................... 23 What Is a Continuous RF Wave? ............................................................................ 23 What Is a Pulsed RF Wave? .................................................................................... 24 What is the “microwave hearing effect”? ............................................................... 24 Natural Sources of RF ........................................................................................... 24 Characteristics of Natural RF: ............................................................................... 25 Biological Sources of RF/EMF ................................................................................ 25 3.2 Consumer Products .................................................................................................................... 25 Wireless Phone Evolution ...................................................................................... 25 Wireless Phones ................................................................................................... 26 Mobile Phone Base Stations .................................................................................. 26 Baby Monitors .....................................................................................................
    [Show full text]
  • 2 Before Use 3 Using the Baby Monitor
    VM320 Important safety instructions 1 Connect and charge the battery 2 Before use The applied nameplate is located at the bottom of the baby kind on the product. Video Monitor unit’s base. 19. To reduce the risk of electric shock, do not NOTES Note When using your equipment, basic safety precautions disassemble this product, but take it to an authorized should always be followed to reduce the risk of fire, electric service facility. Opening or removing parts of the • The rechargeable battery is pre-installed in your parent unit. • This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not shock and injury, including the following: product other than specified access doors may expose be used as such. 1. Follow all warnings and instructions marked on the you to dangerous voltages or other risks. Incorrect • Use only the power adapters supplied with this product. product. reassembling can cause electric shock when the • Make sure the baby monitor is not connected to a switch controlled electric outlet. 2. Adult setup is required. product is subsequently used. Test your baby monitor 3. CAUTION: Do not install the baby unit at a height above 20. You should test the sound reception every time you turn • Connect the power adapters in a vertical or floor mount position only. The adapters’ tips are not 2 metres. on the units or move one of the components. designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table, You may test the baby monitor before initial use, and at regular 4.
    [Show full text]
  • Newborn Care Guide
    Newborn Care Guide Congratulations on the birth of your baby! Contacts During Your Stay Caring for a newborn is one of life’s most rewarding and challenging Patient/Family Initiated Rapid Response Our Rapid Response Team is available 24 hours experiences. Your journey will be filled with excitement, joy, and pos- a day to provide additional expertise to evaluate sibly even fear of the unknown. The information in this booklet was your medical condition when necessary. prepared by the healthcare professionals at Woman’s to answer many When To Call of the questions new parents have. Please feel free to call our staff at Call if there is a significant change in your any time while you are in the hospital. condition that you have reported to the primary care nurse/charge nurse, and you Best wishes to you, your baby, and your family! or your family member still have concerns. How To Call • Dial 8499 from any hospital phone. • Tell the operator: º Your name and room number and º A brief description of your condition Other questions may be asked of you in order to direct the appropriate response team. We hope you will never have to call our Rapid Response Team. Patient/Family Initiated Rapid Response is our way of partnering with you to ensure you receive the highest quality of care. Room Service/Food and Refreshments 6:30 AM-8:30 PM To place an order, extension 3663 Questions or concerns, extension 4669 Family members or guests can purchase guest trays. The charge for guests is collected when the meal is delivered rather than being added to your hospital bill.
    [Show full text]
  • An Intelligent Baby Monitor with Automatic Sleeping Posture Detection and Notification
    Article An Intelligent Baby Monitor with Automatic Sleeping Posture Detection and Notification Tareq Khan School of Engineering, Eastern Michigan University, Ypsilanti, MI 48197, USA; [email protected] Abstract: Artificial intelligence (AI) has brought lots of excitement to our day-to-day lives. Some examples are spam email detection, language translation, etc. Baby monitoring devices are being used to send video data of the baby to the caregiver’s smartphone. However, the automatic understanding of the data was not implemented in most of these devices. In this research, AI and image processing techniques were developed to automatically recognize unwanted situations that the baby was in. The monitoring device automatically detected: (a) whether the baby’s face was covered due to sleeping on the stomach; (b) whether the baby threw off the blanket from the body; (c) whether the baby was moving frequently; (d) whether the baby’s eyes were opened due to awakening. The device sent notifications and generated alerts to the caregiver’s smartphone whenever one or more of these situations occurred. Thus, the caregivers were not required to monitor the baby at regular intervals. They were notified when their attention was required. The device was developed using NVIDIA’s Jetson Nano microcontroller. A night vision camera and Wi-Fi connectivity were interfaced. Deep learning models for pose detection, face and landmark detection were implemented in the microcontroller. A prototype of the monitoring device and the smartphone app were developed and tested successfully for different scenarios. Compared with general baby monitors, the proposed device gives more peace of mind to the caregivers by automatically detecting un-wanted situations.
    [Show full text]
  • Wislow: a Wi-Fi Network Performance Troubleshooting Tool for End Users
    WiSlow: A Wi-Fi Network Performance Troubleshooting Tool for End Users Kyung-Hwa Kim⇤, Hyunwoo Nam† and Henning Schulzrinne⇤ ⇤Department of Computer Science, Columbia University, New York, NY †Department of Electrical Engineering, Columbia University, New York, NY Abstract—Slow Internet connectivity is often caused by poor not depend on a specific network adapter such as the Atheros Wi-Fi performance. The main reasons of such performance degra- chipsets, which were used to achieve similar goals in other dation include channel contention and non-Wi-Fi interference. studies [5], [6]. These features enable WiSlow to run on Although these problem sources can be easily removed in many common end-user machines. cases once they are discovered, it is difficult for end users to identify the sources of such interference. First, we investigate behaviors of 802.11 networks such as retries, frame check sequence (FCS) errors, packet loss, and We investigated the characteristics of different sources that can degrade Wi-Fi performance, and developed WiSlow, a bit rate adaption, which can be observed on ordinary operating software tool that diagnoses the root causes of poor Wi-Fi systems. Our experimental results show that the statistical performance using user-level network probes, and leveraging peer patterns of the above variables vary depending on the problem collaboration to identify the physical location of these causes. sources. For example, with the interference that caused by WiSlow uses two main methods: packet loss analysis and 802.11 non-Wi-Fi devices, we observed a greater number of retried ACK number analysis. The accuracy of WiSlow exceeds 90% packets, fewer FCS errors, and larger variations in the bit rates when the sources are close to Wi-Fi devices.
    [Show full text]
  • Home Safety Checklist Reference Guide
    Home Safety Checklist Reference Guide Revised December 2012 Tobacco additions: November 2015 Created by: Family Home Visiting Unit Maternal and Child Health Section Community and Family Health Division P.O. Box 64882 St Paul, MN 55164-0882 MN Department of Health Family Home Visiting Table of Contents: INTRODUCTION 3 COMMUNICATION SKILLS 4 REFERENCE GUIDE 5 Safe Sleep 5 Bathroom 7 Safe Storage 8 Kitchen 10 Around the House 10 In the car 17 RESOURCES 19 Introduction Why a home safety checklist? Parents want a safe home for their children to play and learn in but sometimes they need a little help thinking about what poses a safety risk in their house. The Home Safety Checklist is intended to be a tool for family home visitors to use during visits with families. The home visitor will need to use professional judgment when deciding how to use the checklist with each family. The MDH Home Safety Checklist was originally created in 1990 and has been updated a few times in the years since. This current revision depicts what current childhood injury trend data show are the leading causes of unintentional injury as well as what family home visitors are seeing in the homes they visit in Minnesota. The revision was accomplished through the efforts of the advisory committee listed below. This group worked to ensure the new documents are accurate and user-friendly. For technical assistance, contact the Maternal and Child Health Section at 651-201-3760, or email the MDH Family Home Visiting program at [email protected]. 2009-2010 Home Safety Checklist Revision Advisory Committee: Local Public Health: Pat Anderson, Pine County Christine Andres, Kanabec County Lona Daley-Getz, Clay County Maren Harris, Dakota Healthy Families Marion Kershner, Ottertail County Laura Larson.
    [Show full text]
  • User's Manual Congratulations
    Go to www.vtechphones.com VM320 1 Connect and charge the battery 2 Before use 3 Using the baby monitor to register your product for enhanced warranty support and VM320-2 NOTES Note Power on or off the baby unit • This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not the latest VTech product news. • The rechargeable battery is pre-installed in your parent unit. • Slide the ON/OFF switch to ON to turn on the baby unit. The POWER LED light turns on. Video Monitor be used as such. • Slide the ON/OFF switch to OFF to turn off the baby unit. The POWER LED light turns off. • Use only the power adapters supplied with this product. • Make sure the baby monitor is not connected to a switch controlled electric outlet. Power on or off the parent unit Test your baby monitor • Slide the ON/OFF switch to ON to turn on the parent unit. The screen and the POWER LED • Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not You may test the baby monitor before initial use, and at regular light turns on. designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table, times thereafter. • Slide the ON/OFF switch to OFF to turn off the parent unit. The screen and the POWER LED or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. light turns off.
    [Show full text]
  • Clearing the RF Smog: Making 802.11 Robust to Cross-Technology Interference
    Clearing the RF Smog: Making 802.11 Robust to Cross-Technology Interference Shyamnath Gollakota † Fadel Adib† Dina Katabi† Srinivasan Seshan⋆ † ⋆ Massachusetts Institute of Technology Carnegie Mellon University {gshyam, fadel, dina}@csail.mit.edu [email protected] ABSTRACT frequency band as wide as 802.11, and all of them emit power that is Recent studies show that high-power cross-technology interfer- comparable or higher than 802.11 devices [17]. Further, the number ence is becoming a major problem in today’s 802.11 networks. De- and diversity of such interferers is likely to increase over time due vices like baby monitors and cordless phones can cause a wire- to the proliferation of new technologies in the ISM band. less LAN to lose connectivity. The existing approach for dealing Traditional solutions that increase resilience to interference by with such high-power interferers makes the 802.11 network switch making 802.11 fall down to a lower bit rate are ineffective against to a different channel; yet the ISM band is becoming increasingly high-power cross-technology interference. As a result, the most crowded with diverse technologies, and hence many 802.11 access common solution today is to hop away to an 802.11 channel that points may not find an interference-free channel. does not suffer from interference [6, 38, 31, 32]. However, the ISM This paper presents TIMO, a MIMO design that enables 802.11n band is becoming increasingly crowded, making it difficult to find to communicate in the presence of high-power cross-technology an interference-free channel.
    [Show full text]