DOCSLIB.ORG

Part IV – Stability and Subdivision – January 2020 (MOR)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Part IV – Stability and Subdivision – January 2020 (MOR) RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS PART IV STABILITY AND SUBDIVISION 2020 January GDAŃSK RULES FOR THE CLASSIFICATION AND CONSTRUCTION OF SEA-GOING SHIPS prepared and edited by Polski Rejestr Statków, hereinafter referred to as PRS, consist of the following Parts: Part I – Classification Regulations Part II – Hull Part III – Hull Equipment Part IV – Stability and Subdivision Part V – Fire Protection Part VI – Machinery Installations and Refrigerating Plants Part VII – Machinery, Boilers and Pressure Vessels Part VIII – Electrical Installations and Control Systems Part IX – Materials and Welding. Part IV – Stability and Subdivision – January 2020 was approved by PRS Executive Board on 17 December 2019 and enters into force on 1 January 2020. From the entry into force, the requirements of Part IV – Stability and Subdivision apply, in full, to new ships. With respect to existing ships, the requirements of Part IV – Stability and Subdivision are applicable within the scope specified in Part I – Classification Regulations. The requirements of Part IV – Stability and Subdivision are extended by the following Publications: Publication 6/P – Stability, Publication 14/P – Principles of Approval of Computer Programs, Publication 16/P – Loading Guidance Information, Publication 32/P – The Requirements for the Stowage and Securing of Cargo on Sea-going Ships, Publication 66/P – Onboard Computers for Stability Calculations, Publication 76/P – Stability, Subdivision and Freeboard of Passenger Ships Engaged on Domestic Voyages, Publication 94/P – Subdivision and Damage Stability of New Oil Tankers, Chemical Tankers and Gas Carriers. © Copyright by Polski Rejestr Statków S.A., 2020 PRS/OP, 12/2019 CONTENTS Page 1 General ................................................................................................................................................................ 5 1.1 Application .................................................................................................................................................. 5 1.2 General ........................................................................................................................................................ 5 1.3 Definitions ................................................................................................................................................... 5 1.4 Documentation............................................................................................................................................. 8 1.5 Scope of Survey ........................................................................................................................................... 9 1.6 General Requirements .............................................................................................................................. 10 1.7 Inclining Test ............................................................................................................................................ 17 1.8 Stability Criteria ....................................................................................................................................... 19 1.9 Departures from and Interpretation of Rules ............................................................................................ 20 1.10 Passage beyond Specified Navigation Area ............................................................................................. 20 1.11 Required Bow Height ............................................................................................................................... 21 1.12 Ballast water exchange ............................................................................................................................. 21 1.13 Freeboard .................................................................................................................................................. 21 2 Basic Requirements and Criteria................................................................................................................... 22 2.1 Unrestricted Service Ships ........................................................................................................................ 22 2.2 Restricted Service Ships ........................................................................................................................... 25 3 Stability – Detailed Requirements for particular Types of ships ................................................................ 28 3.1 Passenger Ships ........................................................................................................................................ 28 3.2 Dry Cargo Ships ....................................................................................................................................... 29 3.3 Container Ships......................................................................................................................................... 30 3.4 Tankers ..................................................................................................................................................... 31 3.5 Timber Carriers......................................................................................................................................... 32 3.6 Special Purpose Ships ............................................................................................................................... 34 3.7 Fishing Vessels ......................................................................................................................................... 34 3.8 Tugs .......................................................................................................................................................... 35 3.9 Supply Vessels .......................................................................................................................................... 38 3.10 Ships Intended for Carriage of Dangerous Bulk Cargoes ......................................................................... 39 3.11 High-speed craft ....................................................................................................................................... 39 3.12 Chemical Tankers ..................................................................................................................................... 39 3.13 Gas Tankers .............................................................................................................................................. 40 3.14 Ships intended to operate in polar waters ................................................................................................. 40 4 Stability – requirements for Technical Floating Units ................................................................................... 41 4.1 Floating Cranes ......................................................................................................................................... 41 4.2 Dredging Fleet .......................................................................................................................................... 49 4.3 Pontoons ................................................................................................................................................... 53 5 Subdivision ....................................................................................................................................................... 55 5.1 Application ............................................................................................................................................... 55 5.2 General Requirements .............................................................................................................................. 55 5.3 Basic Requirements for Various Ship Types ............................................................................................ 57 5.4 Regional Requirements for Damage Stability of Ro-ro Passenger Ships ................................................. 62 5.5 Ships intended to operate in polar waters ................................................................................................. 62 Supplement – Retroactive Requirements ........................................................................................................... 63 Annex 1 .................................................................................................................................................................. 64 Annex 2 .................................................................................................................................................................. 66 Annex 3 .................................................................................................................................................................. 68 Annex 4 .................................................................................................................................................................. 69 Annex 5 .................................................................................................................................................................. 71 Annex 6 .................................................................................................................................................................. 74 Annex 7 .................................................................................................................................................................
Load more

Recommended publications
  • OFFSHORE RACING CONGRESS World Leader in Rating Technology
    OFFSHORE RACING CONGRESS World Leader in Rating Technology Secretariat: UK Office: YCCS, 07020 Porto Cervo Five Gables, Witnesham Sardinia, Italy Ipswich, IP6 9HG England Tel: +39 0789 902 202 Tel: +44 1473 785 091 Fax: +39 0789 957 031 Fax: +44 1473 785 092 [email protected] www.orc.org [email protected] Annual General Meeting held on 11th November, 2003 INDEX Minute No. Page No. Attendance 2 1. Approval of Minutes -- EGM of 9th November, 2003 3 2. The Chairman's Report 5 3. The Treasurer's Report and Audited Accounts 5 4. Levies for Certificates Valid 2004 6 5. Appointment of Auditors 6 6. Appointment of Honorary Treasurer 6 7. Membership of Committees 6 8. International Technical Committee Report 6 9. Measurement Committee Report 15 10. Offshore Classes & Events Committee Report 18 11. Race Management Committee Report 20 12. Promotion and Development Committee Report 21 13. Management Committee Report 24 14. Calendar for 2004 -- Meetings and Events 25 Year-end Fleet Statistics -- 1998 to 2003 27 Offshore Racing Council Ltd. Company Reg. 1523835. Reg. Office: Marlborough House, Victoria Road South, Chelmsford, Essex CM1 1LN, UK MINUTES of the Annual General Meeting of the Offshore Racing Council, Limited held at 0930 on 11th November 2003 in Le Meredien Hotel, Barcelona, Spain. Council Members Present: Chairman: Bruno Finzi Italy Deputy Chiarman: Don Genitempo USA Deputy Chairman: Wolfgang Schaefer Germany/Austria George Andreadis ISAF & Greece Kjell Borking Scandinavia Marcelino Botin Spain Estanislao Duran Iberian peninsula Bruno Frank Switzerland José Frers South America Zoran Grubisa Croatia Giovanni Iannucci Italy David Kellett ISAF Chris Little UK Patrick Lindqvist Scandinavia David Lyons Australia John Osmond USA Abraham Rosemberg Brazil Peter Rutter RORC Dierk Thomsen Germany/Austria Minoru Tomita Japan Ecky von der Mosel Germany Hans Zuiderbaan Benelux Countries Nominated Alternates: Francoise Pascal for J.B.
    [Show full text]
  • Stability Analysis Based on Theoretical Data and Inclining Test Results for a 1200 GT Coaster Vessel
    Proceeding of Marine Safety and Maritime Installation (MSMI 2018) Stability Analysis Based on Theoretical Data and Inclining Test Results for a 1200 GT Coaster Vessel Siti Rahayuningsih1,a,*, Eko B. Djatmiko1,b, Joswan J. Soedjono 1,c and Setyo Nugroho 2,d 1 Departement of Ocean Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia 2 Department of Marine Transportation Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia a. [email protected] *corresponding author Keywords: coaster vessel, final stability, preliminary stability. Abstract: 1200 GT Coaster Vessel is designed to mobilize the flow of goods and passengers in order to implement the Indonesian Sea Toll Program. This vessel is necessary to be analysed its stability to ensure the safety while in operation. The stability is analysed, firstly by theoretical approach (preliminary stability) and secondly, based on inclining test data to derive the final stability. The preliminary stability is analysed for the estimated LWT of 741.20 tons with LCG 23.797 m from AP and VCG 4.88 m above the keel. On the other hand, the inclining test results present the LWT of 831.90 tons with LCG 26.331 m from AP and VCG 4.513 m above the keel. Stability analysis on for both data is performed by considering the standard reference of IMO Instruments Resolution A. 749 (18) Amended by MSC.75 (69) Static stability, as well as guidance from Indonesian Bureau of Classification (BKI). Results of the analysis indicate that the ship meets the stability criteria from IMO and BKI. However results of preliminary stability analysis and final stability analysis exhibit a difference in the range 0.55% to 11.36%.
    [Show full text]
  • Ship Stability
    2018-08-07 Lecture Note of Naval Architectural Calculation Ship Stability Ch. 7 Inclining Test Spring 2018 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University 1 Naval Architectural Calculation, Spring 2018, Myung-Il Roh Contents þ Ch. 1 Introduction to Ship Stability þ Ch. 2 Review of Fluid Mechanics þ Ch. 3 Transverse Stability Due to Cargo Movement þ Ch. 4 Initial Transverse Stability þ Ch. 5 Initial Longitudinal Stability þ Ch. 6 Free Surface Effect þ Ch. 7 Inclining Test þ Ch. 8 Curves of Stability and Stability Criteria þ Ch. 9 Numerical Integration Method in Naval Architecture þ Ch. 10 Hydrostatic Values and Curves þ Ch. 11 Static Equilibrium State after Flooding Due to Damage þ Ch. 12 Deterministic Damage Stability þ Ch. 13 Probabilistic Damage Stability 2 Naval Architectural Calculation, Spring 2018, Myung-Il Roh 1 2018-08-07 How can you get the value of the KG? K: Keel G: Center of gravity Ch. 7 Inclining Test 3 Naval Architectural Calculation, Spring 2018, Myung-Il Roh The Problem of Finding an Accurate Vertical Center of Gravity (KG) The problem of finding an accurate KG for a ship is a serious one for the ship’s designer. FG G ü Any difference in the weight of structural parts, equipment, or welds in different ship will produce a different KG. K There is an accurate method of finding KG for any particular ship and that is the inclining test. 4 Naval Architectural Calculation, Spring 2018, Myung-Il Roh 2 2018-08-07 Required Values to Find the KG (2/3) Heeling moment produced by total weight Righting moment produced by buoyant force Static equilibrium of moment t =F × GZ Inclining test formula r B 6 Naval Architectural Calculation, Spring 2018, Myung-Il Roh Required Values to Find the KG (1/3) GZ» GM ×sinf (at small angle f ) GM= KB +BM - KGKG The purpose of the inclining test is to determine the position of the center of mass of the ship in an accurately known condition.
    [Show full text]
  • Inclining Test and Lightweight Survey V2.1
    GL Leaflet for Inclining test and Lightweight survey V2.1 Leaflet for Inclining test and Lightweight Survey Version 2.1 dated 2011-08-24 1 GL Leaflet for Inclining test and Lightweight survey V2.1 Version information Version Date Editor Items treated Approved 1.0 2005-05 Fim, TBo, Pei initial version HB 2.0 2011-04 Pei, GLe, SKl, MBst draft readings, status of vessel, FSM, tank fillings AFl 2.1 2011-08 Pei, Jasch BW shifting tanks, amount of additional masses, AFl shifting weights, editorial changes 2 GL Leaflet for Inclining test and Lightweight survey V2.1 Table of contents: 1 Inclining Test........................................................................................................................ 4 1.1 Purpose and objective..................................................................................................................... 4 1.2 Acceptance of the test..................................................................................................................... 4 1.3 Procedure of the inclining test ......................................................................................................... 5 1.3.1 Notification of the inclining test/lightweight survey.................................................................. 5 1.3.2 Condition of the vessel ........................................................................................................... 5 1.3.3 Mooring Arrangement.............................................................................................................5
    [Show full text]
  • DNVGL-RU-SHIP Pt.3 Ch.15 Stability
    RULES FOR CLASSIFICATION Ships Edition July 2016 Amended January 2017 Part 3 Hull Chapter 15 Stability The content of this service document is the subject of intellectual property rights reserved by DNV GL AS ("DNV GL"). The user accepts that it is prohibited by anyone else but DNV GL and/or its licensees to offer and/or perform classification, certification and/or verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the basis of and/or pursuant to this document whether free of charge or chargeable, without DNV GL's prior written consent. DNV GL is not responsible for the consequences arising from any use of this document by others. The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. DNV GL AS FOREWORD DNV GL rules for classification contain procedural and technical requirements related to obtaining and retaining a class certificate. The rules represent all requirements adopted by the Society as basis for classification. © DNV GL AS July 2016 Any comments may be sent by e-mail to [email protected] If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of DNV GL, then DNV GL shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million.
    [Show full text]
  • Instruction Manual
    INSTRUCTION MANUAL NA8-10 LARGE ANGLE SHIP STABILITY DYNAMOMETER AND INCLINING MODEL BY R.L. TOWNSIN, B.Sc., Ph.D., Eng., F.R.I.N.A., F.I. Mar. E. SCHOOL OF MARINE TECHNOLOGY UNIVERSITY OF NEWCASTLE UPON TYNE ENGLAND NA8-10 ISSUE 10 MAY 2009 NA8-10 LARGE ANGLE SHIP STABILITY DYNAMOMETER ARMFIELD LIMITED OPERATING INSTRUCTIONS AND EXPERIMENTS NA8-10 - LARGE ANGLE SHIP STABILITY DYNAMOMETER AND INCLINING MODEL CONTENTS PAGE NO. SAFETY 1 INTRODUCTION 4 RECEIPT OF EQUIPMENT 6 ASSEMBLY OF EQUIPMENT 7 COMMISSIONING 9 THE CLINOMETER (NA8-12) 10 ROUTINE MAINTENANCE 13 THE GENERAL CARGO VESSEL MODEL (NA8-13) 14 THE INCLINING EXPERIMENT 16 LARGE ANGLE STABILITY 18 SETTING UP THE DYNAMOMETER 18 TAKING THE MEASUREMENTS 19 ADDITIONAL EXPERIMENTS 20 BIBLIOGRAPHY 21 A NOTE ON CORRECTIONS FOR HOG AND SAG 22 REFERENCES 38 APPENDIX 1 TABLES FOR GENERAL CARGO VESSEL NA8-13 APPENDIX 1-1 TABLE I - HYDROSTATIC INFORMATION APPENDIX 1-2 BULKHEAD POSITIONS APPENDIX 1-3 TABLE II - LOADING CONDITION APPENDIX 1-3 TABLE III - CROSS CURVES OF STABILITY APPENDIX 1-4 TABLE IV - TABLE OF OFFSETS APPENDIX 1-5 TABLE V - TABLE OF OFFSETS APPENDIX 1-6 APPENDIX 2 TYPICAL RESULTS FOR GENERAL CARGO VESSEL APPENDIX 2-1 DETAILED CALCULATIONS APPENDIX 2-2 HYDROSTATIC INFORMATION FOR MODEL APPENDIX 2-3 THE EFFECTS OF FLOODING APPENDIX 2-4 AN ASYMMETRIC FLOODING EXPERIMENT APPENDIX 2-12 THE INFLUENCE OF A SUSPENDED MASS APPENDIX 2-13 INCLINING EXPERIMENT APPENDIX 2-15 MEASUREMENTS FOR 2 STATICAL STABILITY CURVESAPPENDIX 2-17 BIBLIOGRAPHY APPENDIX 2-22 GENERAL SAFETY RULES a NA8-10 LARGE ANGLE SHIP STABILITY DYNAMOMETER SAFETY IN THE USE OF EQUIPMENT SUPPLIED BY ARMFIELD Before proceeding to install, commission or operate the equipment described in this instruction manual we wish to alert you to potential hazards so that they may be avoided.
    [Show full text]
  • Basic Ship Theory to Marine Science Student
    Tujuan Tatap Muka Matakuliah Rancang Bangun Kapal Perikanan 1. Mahasiswa Memahami Beberapa Definisi Dasar Geometry Perkapalan Dalam Rancang Bangun Kapal Perikanan. 2. Mahasiswa Memahami Beberapa Definisi Dasar Hydrostatic Curve dan Bonjean Curve 3. Mahasiswa Memahami Teori Stabilitas Kapal Perikanan 4. Mahasiswa Memahami tentang Sheel Expantion. What is your mind about this movie1 , movie2Abeille Flandre.flv, movie3 and movie4 BasicBasic ShipShip TheoryTheory DefinitionsDefinitions DISPLACEMENT Archimedes principle: Every floating body displaces its own weight of the liquid in which it floats For a vessel to float freely in water, the weight of the vessel must be equal to the weight of the volume of water it displaces Displacement is the volume of water the vessel displaces DRAUGHT Draught relates to the depth of water required for a vessel to float freely and is measured vertically from the underneath side of the keel to the waterline FREEBOARD Freeboard is the vertical distance from the top of the lowest point of the working deck at the side of the vessel to the waterline LIGHT SHIP WEIGHT The light ship weight is the actual weight of a vessel when complete and ready for service but empty DEADWEIGHT Deadweight is the actual amount of weight in tonnes that a vessel can carry when loaded to the maximum permissible draught (includes fuel, fresh water, gear supplies, catch and crew) DISPLACEMENT MASS Displacement mass is the total weight of the vessel, i.e.: Lightship weight + deadweight = displacement mass LIST A vessel is said to be listed when it is inclined by forces within the vessel, e.g. movement of weight within the vessel A list reduces the stability of the vessel When a list is corrected by increasing the displacement mass, the additional weight should be placed as low as possible in the vessel HEEL A vessel is said to be heeled when it is inclined by an external force, e.g.
    [Show full text]
  • Msis003/Part 6/Rev 1.01 Page 1 Part 6 Notes For
    PART 6 NOTES FOR GUIDANCE FOR CARRYING OUT AN INCLINING TEST 6.1 Introduction 6.1.1 These notes are intended to provide practical guidance in order to minimise inaccuracies and ensure that the information derived from the inclining test provides a satisfactory basis, acceptable to the MCA or delegated Authority, for the determination of the ship's stability characteristics. 6.1.2 It is appreciated that the following recommended procedures for inclining tests cannot always be achieved and equally efficient alternative procedures may have to be adopted to suit particular circumstances. 6.1.3 For small ships where it is considered impracticable to adopt procedures as given in these notes, advice may be sought from Headquarters. 6.1.4 The inclining test must be witnessed by a Surveyor of the MCA or delegated Authority. 6.1.5 Advice on the procedure when an inclining test may be dispensed with in certain circumstances is contained at paragraph 6.4 below. 6.2 Preparations for Test 6.2.1 Preliminary meeting with builders/owners 6.2.1.1 The Surveyor should inspect the ship shortly before the test to satisfy himself that the ship will be in an acceptable condition. If this is not so the Surveyor may require that the test be postponed. 6.2.1.2 An opportunity should be taken to discuss and confirm arrangements for the test with the Builder/Owner with particular regard to the following: (a) Inclining weight data: (i) type, amount and position on board; (ii) method of handling weights; and (iii) anticipated maximum angle of heel to each side from upright.
    [Show full text]
  • ASTM F1321: Standard Guide for Conducting a Stability Test
    By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code § 552(a) and Part 1 of the Code of Regulations § 51 the attached document has been duly INCORPORATED BY REFERENCE and shall be considered legally binding upon all citizens and residents of the United States of America. HEED THIS NOTICE: Criminal penalties may apply for noncompliance. e Document Name: CFR Section(s): Standards Body: Official Incorporator: THE EXECUTIVE DIRECTOR OFFICE OF THE FEDERAL REGISTER WASHINGTON, D.C. ~~l~ Designation: F 1321 - 92 An American National Standard Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a VesseP This standard is issued under the fixed designation F 1321; the number immediately following the designation indicates the year of ' original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (.) indicates an editorial change since the last revision or reapproval. INTRODUCfION This guide provides the marine industry with a basic understanding of the various aspects of a stability test. It contains procedures for conducting a stability test in order to ensure that valid results are obtained with maximum precision at a minimal cost to owners, shipyards, and the government. This guide is not intended to instruct a person in the actual calculation of the light ship displacement and centers of gravity, but rather to be a guide to the necessary procedures to be followed to gather accurate data for use in the calculation of the light ship characteristics.
    [Show full text]
  • SC155 SC155 Lightweight Check in Lieu of Inclining Test
    SC155 SC155 Lightweight check in lieu of inclining test (June(cont) 2000) (Rev.1 Regulation II-1/22 Feb 2008) (Rev.2 Stability information for passenger ships and cargo ships Feb 2010) 1. Every passenger ship regardless of size and every cargo ship having a length, as defined in the International Convention on Load Lines in force, of 24 m and upwards, shall be inclined upon its completion and the elements of its stability determined. The master shall be supplied with such information satisfactory to the Administration as is necessary to enable him by rapid and simple processes to obtain accurate guidance as to the stability of the ship under varying conditions of service. A copy of the stability information shall be furnished to the Administration. 2. Where any alterations are made to a ship so as to materially affect the stability information supplied to the master, amended stability information shall be provided. If necessary the ship shall be re-inclined. 3. At periodical intervals not exceeding five years, a lightweight survey shall be carried out on all passenger ships to verify any changes in lightship displacement and longitudinal centre of gravity. The ship shall be re-inclined whenever, in comparison with the approved stability information, a deviation from the lightship displacement exceeding 2% or a deviation of the longitudinal centre of gravity exceeding 1% of L is found or anticipated. 4. The Administration may allow the inclining test of an individual ship to be dispensed with provided basic stability data are available from the inclining test of a sister ship and it is shown to the satisfaction of the Administration that reliable stability information for the exempted ship can be obtained from such basic data, as required by paragraph 1.
    [Show full text]
  • Ship Stability
    Planning Procedure of Naval Architecture and Ocean Engineering Ship Stability September 2013 Myung-Il Roh Department of Naval Architecture and Ocean Engineering Seoul National University 1 Planning Procedure of Naval Architecture and Ocean Engineering, Fall 2013, Myung-Il Roh Ship Stability þ Ch. 1 Introduction to Ship Stability þ Ch. 2 Review of Fluid Mechanics þ Ch. 3 Transverse Stability þ Ch. 4 Initial Transverse Stability þ Ch. 5 Free Surface Effect þ Ch. 6 Inclining Test þ Ch. 7 Longitudinal Stability þ Ch. 8 Curves of Stability and Stability Criteria þ Ch. 9 Numerical Integration Method in Naval Architecture þ Ch. 10 Hydrostatic Values þ Ch. 11 Introduction to Damage Stability þ Ch. 12 Deterministic Damage Stability þ Ch. 13 Probabilistic Damage Stability (Subdivision and Damage Stability, SDS) 2 Planning Procedure of Naval Architecture and Ocean Engineering, Fall 2013, Myung-Il Roh Ch. 6 Inclining Test 3 Planning Procedure of Naval Architecture and Ocean Engineering, Fall 2013, Myung-Il Roh The Problem of Finding an Accurate Vertical Center of Mass(KG) The problem of finding an accurate KG for a ship is a serious one for the ship’s designer. F G How can you get the value of the KG? G ü Any difference in the weight of structural parts, equipment, or welds in different ship will produce a different KG. K K: Keel G: Center of mass There is an accurate method of finding KG for any particular ship and that is the inclining test. 4 Planning Procedure of Naval Architecture and Ocean Engineering, Fall 2013, Myung-Il Roh t r=F B × GZ Required Values to Find the KG (1/3) GZ» GM ×sinf (at small angle f ) GM= KB +BM - KGKG The purpose of the inclining test is to determine the position of the center of mass of the ship in an accurately known condition.
    [Show full text]
  • The Magazine for Those Working in Design, Construction, and Repair
    The magazine for those working in design, construction, and repair NUMBER 162 INCLINING EXPERIMENTS AUGUST/SEPTEMBER NEW IMOCA 60 RULES 2016 SANITATION SYSTEMS $5.95 U.S. A BERTRAM REFIT PRACTICAL SOLUTIONS Best of Inclinations A designer looks at the importance of quantifying vessel stability, along with a variety of on-the-water inclining experiments to determine or to verify it. Text and photographs by Butch Dalrymple-Smith oat stability is important. We may its significance goes beyond that. of an existing vessel. While simple in Bregard it as simply another statu- Just how to quantify and measure concept, it can be complex in prac- tory requirement among many other stability has been central to the tice, but it is a practical measure to things required for certification by refi nement of hull design and perfor- confi rm that a boat will perform as the European Recreational Craft mance for centuries now. Inclining the designer’s theoretical stability cal- Directive (RCD) or International tests are an on-the-water method of culations suggest. Marine Organisation (IMO) rules, but determining the actual stability profi le Let’s start with some stability basics. Above—During the inclining experiment, temporary panels protect the deck from possible damage as a crew shifts dollies laden with lead pigs from one side of the boat to the other in a set routine; then, changes to the heel angle will be measured to reveal the vessel’s stability and enable calculation of the vertical center of gravity. If test weights are on wheeled dollies, as shown here, the wheels must be locked during testing so the weights can’t roll across the deck as the boat heels.
    [Show full text]