PC Application Manual(2.75MB)
Total Page:16
File Type:pdf, Size:1020Kb
Windows, Macintosh Step 1 Windows Users Macintosh Users System Requirements Step 1 Windows System Requirements Macintosh System Requirements First, check the system requirements for the provided software. USB connection and the included application software do not support Windows 95, USB connection PC Connection Windows 98, Windows 98SE, Windows Me and Windows NT. • OS : Mac OS X (Ver. 10.1.2 - 10.5) (The OS must be preinstalled and updated to the latest version.) USB connection • USB port must be standard equipment • OS : Windows 2000, Windows XP, Windows Vista (The OS must be ∗ Installation of the driver is not necessary. Manual Step 2 Step 2 preinstalled and updated to the latest version.) Application Software Install the image viewing/managing/ Install the image viewing/managing • USB port must be standard equipment ∗ Driver installation is unnecessary. <ACDSee 2 for Mac> You can transfer images and movies captured with your digital camera to your computer and editing software (ACDSee for software (ACDSee 2 for Mac) on your (Six languages: English, French, German, Spanish, Italian, Japanese) then display and manage them by installing the software included on the provided CD-ROM PENTAX 3.0) on your PC. Macintosh. Application Software • OS : Mac OS X (ver. 10.3 - 10.5) to your computer and connecting your digital camera to your computer with the USB cable. <ACDSee for PENTAX 3.0> This section explains how to install the provided software “ACDSee for PENTAX” and • CPU : Power Macintosh 233 MHz or higher (Nine languages: English, French, German, Spanish, Italian, Russian, Chinese [traditional • Memory : 8 MB minimum “ACDSee 2 for Mac”, and the other necessary preparations for enjoying your digital camera and simplified], Korean, Japanese) pictures and movies on your computer. • Hard Disk space : 6 MB minimum • OS : Windows 2000, Windows XP or Windows Vista • CD-ROM drive, QuickTime 4.0 or later PENTAX and Optio are trademarks of HOYA CORPORATION. • CPU : Pentium III or higher Step 3 ∗ The OS must be preinstalled and updated to the latest version. © 2008 ACD Systems Ltd. All rights reserved. ACDSee and the ACDSee logo are trademarks • Memory : 256 MB minimum (512 MB or more recommended) ∗ Operation is not guaranteed on all computers meeting the system requirements. of ACD Systems Ltd. in Canada, the U.S., Europe, Japan and other countries. Set up your digital camera for connecting with your computer. • Hard Disk space : 100 MB minimum (1 GB or more recommended) Microsoft and Windows are registered trademarks of Microsoft Corporation in the United • CD-ROM drive States and other countries. • Monitor : Display adapter capable of displaying a minimum of 256 colors Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the • Internet Explorer 5.0 or later United States and/or other countries. ∗ DirectX 9.0 or later and Windows Media Player 9.0 or later are required to play the movies. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other ∗ The OS must be preinstalled and updated to the latest version. countries. Step 4 *on reverse side Step 4 *on reverse side ∗ Operation is not guaranteed on all computers meeting the system requirements. All other brands or product names are trademarks or registered trademarks of their respective ∗ The system requirements describe the minimum environment for playing and editing Connect the camera and your PC, Connect the camera and your companies. movies. and transfer images. Macintosh, and transfer images. The versions of Internet Explorer, Windows Media Player and DirectX required for use of “ACDSee for PENTAX 3.0” are not included in the provided CD-ROM (S-SW81). Visit the following sites to download necessary items and install/update them on your PC. • Internet Explorer Step 5 *on reverse side Step 5 *on reverse side http://www.microsoft.com/windows/products/winfamily/ie/default.mspx • Windows Media Player Use the supplied software to view, Use the supplied software to view http://www.microsoft.com/windows/products/winfamily/mediaplayer/default.mspx Software Provided manage or edit images transferred to and manage images transferred to • DirectX your PC. You can also enjoy laying your Macintosh. http://www.microsoft.com/windows/directx/default.mspx Windows out and printing images or creating • ACDSee for PENTAX 3.0 (Image viewing/managing/editing software) slide shows. Macintosh You are recommended to use an AC adapter connected to a power outlet when • ACDSee 2 for Mac (Image viewing/managing software) connecting the camera to a computer. If the battery runs out of power while images are being transmitted to the computer, the image data may be lost or damaged. When using an AC adapter, make sure that the AC plug cord is properly connected to the camera. 53391 H02-200806 Printed in China Windows Step 2 Macintosh Step 2 Windows, Macintosh Step 3 4 Click [Install]. Installing the Software Setup screen appears. Follow the on-screen guidance and Installing the Software Setting Up Your Digital Camera Install the image viewing/managing/editing software (ACDSee for PENTAX 3.0). enter the registration information. Install the image viewing/managing software (ACDSee 2 for Mac). Setting the USB Connection Mode to [PC] • Make sure your PC meets the system requirements before installing the software. 1 Turn your Macintosh on. • When multiple accounts have been setup in Windows 2000, Windows XP or Windows 2 Insert the CD-ROM (S-SW81) in the CD-ROM drive. These settings must be configured before connecting to a computer. These settings Vista, log on with an account that has administrative rights before installing the software. 3 Double-click the CD-ROM (S-SW81) icon. cannot be configured while the camera is connected to the computer with a USB cable. 1 Turn your PC on. 4 Double-click the [ACDSee Installer] icon. 1 Press the 3 button. 2 Insert the CD-ROM (S-SW81) into the CD-ROM drive. The language selection screen appears. Setting 2/3 Double-click the [Master Installer] icon to display the language selection screen. Press the four-way controller (5) to display the Folder Name Date The language selection screen appears. 2 USB Connection PC 5 Choose a language from the displayed screen. [W Setting] menu. Video Out PictBridge If you are using Windows Vista Brightness Level The “ACDSee 2 for Mac” installer screen appears. 3 Use the four-way controller (23) to select [USB Power Saving 5sec When the [AutoPlay] screen appears, display the language selection screen following the Connection]. Auto Power Off 3min steps below. MENU CancelCancel OK OKOK 1) Click [Run setup.exe]. 4 Press the four-way controller (5). 2) Click [Allow]. A pull-down menu appears. The language selection screen appears. 5 Click [Finish]. 5 Use the four-way controller (23) to select [PC]. If the language selection screen does not appear ACDSee for PENTAX 3.0 installation is complete. 6 Press the 4 button. Display the language selection screen following the steps below. To continue, click [Exit] on the install window to close the 6 Click [Install]. 1) Double-click [My Computer] on the desktop. window and restart Windows. The setup screen appears. Follow the on-screen guidance to 2) Double-click the [CD-ROM drive (S-SW81)] icon. input registration information and install the software. 3) Double-click the [Setup.exe] icon. 3 Choose a language from the displayed screen. The “ACDSee for PENTAX 3.0” installation screen appears. Product Registration on the Internet If your computer is connected to the Internet, please click [Product Registration] on the setup screen in Step 2 . A world map for Internet Product Registration is displayed. Click the displayed country or region and then follow the instructions to register your product. Thank you very much for your cooperation. Only customers in displayed countries and regions can register their products on the Internet Product Registration. Windows Step 4 Windows Step 5 Macintosh Step 5 8 Select the folders you want to copy to the PC. Transferring Images to a Windows PC Using ACDSee for PENTAX 3.0 Using “ACDSee 2 for Mac” When the digital camera is connected to your Windows PC and the camera is turned on, the “ACDSee for PENTAX 3.0” lets you view, edit, organize, search for, share, and print images. “ACDSee 2 for Mac” lets you display and manage images. PC automatically recognizes the camera and the confirmation dialog box for transferring Select the folder (s) images (the Device Detector screen) appears. Starting “ACDSee for PENTAX 3.0” Starting “ACDSee 2 for Mac” 1 Double-click the [ACDSee for PENTAX 3.0] icon on the desktop. 1 Double-click the [ACDSee] folder inside the [Applications] folder. 9 Select [Copy To Folder...] from the [Edit] menu. Connecting the Camera and PC ACDSee starts and the main window, which is called the browser, appears. 2 Double-click the [ACDSee 2 for Mac] icon. The Copy Files screen appears. 1 Turn your PC on. ACDSee starts and the main window, which is called the browser, appears. ACDSee Browser Interface 2 With your camera turned off, connect it to your PC using the USB cable. Connect the terminal of the USB cable with pointing toward the 4 on the PC/AV terminal ACDSee Browser Interface of the camera. A B A If there is no SD Memory Card in the camera, the images stored in the built-in memory will 10 Specify the destination folder. be transmitted to your PC. B 11 Click [OK]. F C The folders or images are copied to the PC. C D E E D Disconnecting the Camera from Your PC F 2 G 1 Double-click the [Safely Remove Hardware] icon G in the task bar.