DOCSLIB.ORG

Enea® Linux Open Source Report

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Enea® Linux Open Source Report Enea® Linux Open Source Report Release Version 8.1 Profile rt-8.1 Enea® Linux Open Source Report Enea® Linux Open Source Report: Release Version 8.1 Copyright Copyright © Enea Software AB 2019. This User Documentation consists of confidential information and is protected by Trade Secret Law. This notice of copyright does not indicate any actual or intended publication of this information. Except to the extent expressly stipulated in any software license agreement covering this User Documentation and/or corresponding software, no part of this User Documentation may be reproduced, transmitted, stored in a retrieval system, or translated, in any form or by any means, without the prior written permission of Enea Software AB. However, permission to print copies for personal use is hereby granted. Disclaimer The information in this User Documentation is subject to change without notice, and unless stipulated in any software license agreement covering this User Documentation and/or corresponding software, should not be construed as a commitment of Enea Software AB. Trademarks Enea®, Enea OSE®, and Polyhedra® are the registered trademarks of Enea AB and its subsidiaries. Enea OSE®ck, Enea OSE® Epsilon, Enea® Element, Enea® Optima, Enea® Linux, Enea® LINX, Enea® LWRT, Enea® Accelerator, Polyhedra® Flash DBMS, Polyhedra® Lite, Enea® dSPEED, Enea® NFV Access, Accelerating Network Convergence™, Device Software Optimized™, and Embedded for Leaders™ are unregistered trademarks of Enea AB or its subsidiaries. Any other company, product or service names mentioned in this document are the registered or unregistered trademarks of their respective owner. Acknowledgements and Open Source License Conditions Detailed information is found in the Open Source Report(s) provided with this Release. © Enea Software AB 2019 Profile rt-8.1 ii Enea® Linux Open Source Report Table of Contents 1 - About this Report ........................................................................................................ 4 2 - Packages and Licenses .................................................................................................. 5 2.1 - Packages ........................................................................................................... 5 2.2 - Open Source Licenses ........................................................................................ 29 2.2.1 - AFL-2.0 ................................................................................................ 29 2.2.2 - Apache-2.0 ............................................................................................ 31 2.2.3 - Artistic-1.0 ............................................................................................ 34 2.2.4 - BSD ..................................................................................................... 35 2.2.5 - BSD-2-Clause ........................................................................................ 36 2.2.6 - BSD-3-Clause ........................................................................................ 36 2.2.7 - BSD-4-Clause ........................................................................................ 37 2.2.8 - BSL-1.0 ................................................................................................ 37 2.2.9 - CC-BY-SA-3.0 ....................................................................................... 38 2.2.10 - CDDL-1.0 ............................................................................................ 42 2.2.11 - EDL-1.0 .............................................................................................. 47 2.2.12 - EPL-1.0 ............................................................................................... 47 2.2.13 - FSF-Unlimited ...................................................................................... 50 2.2.14 - FreeType ............................................................................................. 50 2.2.15 - GPL-1.0 .............................................................................................. 53 2.2.16 - GPL-2.0 .............................................................................................. 57 2.2.17 - GPL-2.0-with-OpenSSL-exception ............................................................ 61 2.2.18 - GPL-3.0 .............................................................................................. 68 2.2.19 - GPL-3.0-with-GCC-exception .................................................................. 77 2.2.20 - GPL-3.0-with-autoconf-exception ............................................................. 78 2.2.21 - ICU .................................................................................................... 78 2.2.22 - ISC ..................................................................................................... 79 2.2.23 - LGPL-2.0 ............................................................................................ 79 2.2.24 - LGPL-2.1 ............................................................................................ 88 2.2.25 - LGPL-3.0 ............................................................................................ 94 2.2.26 - Libpng ................................................................................................ 96 2.2.27 - MIT .................................................................................................... 98 2.2.28 - MPL-1.0 .............................................................................................. 99 2.2.29 - MPL-1.1 ............................................................................................ 103 2.2.30 - MPL-2.0 ............................................................................................ 109 2.2.31 - NCSA ............................................................................................... 115 2.2.32 - OFL-1.1 ............................................................................................. 115 2.2.33 - OpenSSL ........................................................................................... 117 2.2.34 - PD .................................................................................................... 119 2.2.35 - Python-2.0 .......................................................................................... 119 2.2.36 - SMAIL_GPL ...................................................................................... 122 2.2.37 - Sleepycat ........................................................................................... 124 2.2.38 - Zlib ................................................................................................... 126 2.2.39 - tcl ..................................................................................................... 126 2.3 - Proprietary Licenses ......................................................................................... 127 © Enea Software AB 2019 Profile rt-8.1 iii Enea® Linux Open Source Report 1. About this Report 1. About this Report This document contains the open source and license information pertaining to packages provided with Enea Linux 8.1. © Enea Software AB 2019 Profile rt-8.1 4 Enea® Linux Open Source Report 2. Packages and Licenses 2. Packages and Licenses 2.1 Packages Package Version Description License Target Name acl 2.2.52 Utilities for managing POSIX Access Control LGPL-2.1, ✓ Lists. GPL-2.0 acpica 20180508 The ACPI Component Architecture (ACPICA) BSD, GPL-2.0 project provides an OS-independent reference im- plementation of the Advanced Configuration and Power Interface Specification (ACPI). ACPICA code contains those portions of ACPI meant to be directly integrated into the host OS as a kernel-res- ident subsystem and a small set of tools to assist in developing and debugging ACPI tables. adwai- 3.30.1 GTK+ icon theme. LGPL-3.0, CC- ta-icon- BY-SA-3.0 theme alsa-lib 1.1.8 ALSA sound library. LGPL-2.1, GPL-2.0 at-spi2-atk 2.30.0 AT-SPI 2 Toolkit Bridge. LGPL-2.0 at-spi2-core 2.30.0 Assistive Technology Service Provider Interface LGPL-2.0 (dbus core). atk 2.30.0 Accessibility toolkit for GNOME. GPL-2.0, LGPL-2.0 attr 2.4.47 Utilities for manipulating filesystem extended at- LGPL-2.1, ✓ tributes. GPL-2.0 auto- 2018.03.13 a collection of freely re-usable Autoconf macros. GPL-3.0-with- conf-archive autoconf-ex- ception autoconf 2.69 Autoconf is an extensible package of M4 macros GPL-2.0, that produce shell scripts to automatically config- GPL-3.0 ure software source code packages. Autoconf cre- ates a configuration script for a package from a template file that lists the operating system features that the package can use in the form of M4 macro calls. automake 1.16.1 Automake is a tool for automatically generating GPL-2.0 `Makefile.in' files compliant with the GNU Coding Standards. Automake requires the use of Autoconf. babeltrace 1.5.6 Babeltrace provides trace read and write libraries in MIT, GPL-2.0 host side as well as a trace converter which used to convert LTTng 2.0 traces into human-readable log. base-files 3.0.14 The base-files package creates the basic system di- GPL-2.0 ✓ rectory structure and provides a small set of key configuration files for the system. © Enea Software AB 2019 Profile rt-8.1 5 Enea® Linux Open Source Report 2. Packages and Licenses Package Version Description License Target Name base-passwd 3.5.29 The master copies of the user database files (/etc/ GPL-2.0 ✓ passwd and /etc/group). The update-passwd tool is also provided to keep the system databases syn- chronized
Load more

Recommended publications
  • Release Notes for X11R6.8.2 the X.Orgfoundation the Xfree86 Project, Inc
    Release Notes for X11R6.8.2 The X.OrgFoundation The XFree86 Project, Inc. 9February 2005 Abstract These release notes contains information about features and their status in the X.Org Foundation X11R6.8.2 release. It is based on the XFree86 4.4RC2 RELNOTES docu- ment published by The XFree86™ Project, Inc. Thereare significant updates and dif- ferences in the X.Orgrelease as noted below. 1. Introduction to the X11R6.8.2 Release The release numbering is based on the original MIT X numbering system. X11refers to the ver- sion of the network protocol that the X Window system is based on: Version 11was first released in 1988 and has been stable for 15 years, with only upwardcompatible additions to the coreX protocol, a recordofstability envied in computing. Formal releases of X started with X version 9 from MIT;the first commercial X products werebased on X version 10. The MIT X Consortium and its successors, the X Consortium, the Open Group X Project Team, and the X.OrgGroup released versions X11R3 through X11R6.6, beforethe founding of the X.OrgFoundation. Therewill be futuremaintenance releases in the X11R6.8.x series. However,efforts arewell underway to split the X distribution into its modular components to allow for easier maintenance and independent updates. We expect a transitional period while both X11R6.8 releases arebeing fielded and the modular release completed and deployed while both will be available as different consumers of X technology have different constraints on deployment. Wehave not yet decided how the modular X releases will be numbered. We encourage you to submit bug fixes and enhancements to bugzilla.freedesktop.orgusing the xorgproduct, and discussions on this server take place on <[email protected]>.
    [Show full text]
  • Porting a Window Manager from Xlib to XCB
    Porting a Window Manager from Xlib to XCB Arnaud Fontaine (08090091) 16 May 2008 Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version pub- lished by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License". Contents List of figures i List of listings ii Introduction 1 1 Backgrounds and Motivations 2 2 X Window System (X11) 6 2.1 Introduction . .6 2.2 History . .6 2.3 X Window Protocol . .7 2.3.1 Introduction . .7 2.3.2 Protocol overview . .8 2.3.3 Identifiers of resources . 10 2.3.4 Atoms . 10 2.3.5 Windows . 12 2.3.6 Pixmaps . 14 2.3.7 Events . 14 2.3.8 Keyboard and pointer . 15 2.3.9 Extensions . 17 2.4 X protocol client libraries . 18 2.4.1 Xlib . 18 2.4.1.1 Introduction . 18 2.4.1.2 Data types and functions . 18 2.4.1.3 Pros . 19 2.4.1.4 Cons . 19 2.4.1.5 Example . 20 2.4.2 XCB . 20 2.4.2.1 Introduction . 20 2.4.2.2 Data types and functions . 21 2.4.2.3 xcb-util library . 22 2.4.2.4 Pros . 22 2.4.2.5 Cons . 23 2.4.2.6 Example . 23 2.4.3 Xlib/XCB round-trip performance comparison .
    [Show full text]
  • Vorlage Für Dokumente Bei AI
    Date: 1-September-2016 OSS Disclosure Document CM_CI1/EGM-P OSS Licenses used in GM-MY17 Project Page 1 1 Overview .................................................. 10 2 OSS Licenses used in the project .......................... 10 3 Package details for OSS Licenses usage .................... 11 3.1 7 Zip - LZMA SDK - 9.2/4.01 .................................. 11 3.2 ACL - 2.2.51 ................................................. 11 3.3 AES - Advanced Encryption Standard – 1.0 ..................... 11 3.4 Alsa Libraries - 1.0.27.2 .................................... 11 3.5 Alsa Plugins - 1.0.26 ........................................ 11 3.6 Alsa Utils - 1.0.27.2 ........................................ 12 3.7 APMD - 3.2.2 ................................................. 12 3.8 ATK - 2.8.0 .................................................. 12 3.9 Attr - 2.4.46 ................................................ 12 3.10 Audio File Library - 0.2.7 ................................. 12 3.11 Android - platform - bootable – recovery -4.2 .............. 12 3.12 Android - platform - system – core -4.2 .................... 12 3.13 Avahi - 0.6.31 ............................................. 13 3.14 Bash - 3.2.48 .............................................. 13 3.15 Bison with GPL 3.0 exception - 2.7.1 ....................... 13 3.16 Blktrace - 1.0.5 ........................................... 13 3.17 BlueZ - 4.101/5.15 ......................................... 13 3.18 Boost C++ Libraries- boost 1.50.0 .......................... 13 3.19 BPSTL
    [Show full text]
  • Optimization of Fontconfig Library Optimization of Fontconfig Library
    Michal Srb OPTIMIZATION OF FONTCONFIG LIBRARY OPTIMIZATION OF FONTCONFIG LIBRARY Michal Srb Bachelor's Thesis Spring 2017 Information Technology Oulu University of Applied Sciences ABSTRACT Oulu University of Applied Sciences Degree Programme in Information Technology, Internet Services Author: Michal Srb Title of the bachelor’s thesis: Optimization of Fontconfig Library Supervisor: Teemu Korpela Term and year of completion: Spring 2017 Number of pages: 39 + 1 appendix Fontconfig is a library that manages a database of fonts on Linux systems. The aim of this Bachelor's thesis was to explore options for making it respond faster to application's queries. The library was identified as a bottleneck during the startup of graphical applications. The typical usage of the library by applications was analyzed and a set of standalone benchmarks were created. The library was profiled to identify hot spots and multiple optimizations were applied to it. It was determined that to achieve an optimal performance, a complete rewrite would be necessary. However, that could not be done while staying backward compatible. Nevertheless, the optimizations applied to the existing fontconfig yielded significant performance improvements, up to 98% speedups in benchmarks based on the real-world usage. Keywords: fontconfig, optimization, benchmarking, profiling 3 CONTENTS 1 INTRODUCTION 6 2 BACKGROUND 7 1.1 Motivation 7 1.2 Fontconfig 8 1.2.1 Function 9 1.2.2 Configuration 11 2 ANALYSIS 12 2.1 Main entry functions 12 2.1.1 FcFontMatch 12 2.1.2 FcFontSort 14 2.1.3
    [Show full text]
  • Insider Threat Detection with Text Libraries and Machine Learning
    Insider Threat Detection with Text Libraries and Machine Learning A Major Qualifying Project Submitted to the Faculty of Worcester Polytechnic Institute In partial fulfillment of the requirement for the Degree in Bachelor of Science in Computer Science By Bryan Z. Li Patrick R. Kane Date: 12/19/2013 Project Advisor: Prof. Craig Shue, Advisor This report represents work of WPI undergraduate students submitted to the faculty as evidence of a degree requirement. WPI routinely publishes these reports on its web site without editorial or peer review. For more information about the projects program at WPI, see http://www.wpi.edu/Academics/Projects 1 Abstract Company networks are protected by firewalls and other measures to ensure that data remains secure. However, these same companies have limited techniques to protect information from being compromised from inside the closed network. According to CERT, the Computer Emergency Readiness Team, over 700 unique cases are currently documented and growing rapidly [20]. Sensitive company documents are leaked every year by means of email, printed documents, USB flash drives, and other mediums of data storage. Because there are many legitimate reasons for accessing secret data, insider threats are extremely difficult to detect. A company cannot simply create a policy that bans the use of USB drives or printing, because there are many instances where an employee would be required to print or transfer files using a USB flash drive. In addition to the difficulty of detecting insider threats, the consequences of such attacks can be catastrophic, as is the case with the whistleblower Edward Snowden and his release of documents pertaining to the NSA.
    [Show full text]
  • Release Notes for Xfree86® 4.8.0 the Xfree86 Project, Inc December 2008
    Release Notes for XFree86® 4.8.0 The XFree86 Project, Inc December 2008 Abstract This document contains information about the various features and their current sta- tus in the XFree86 4.8.0 release. 1. Introduction to the 4.x Release Series XFree86 4.0 was the first official release of the XFree86 4 series. The current release (4.8.0) is the latest in that series. The XFree86 4.x series represents a significant redesign of the XFree86 X server,with a strong focus on modularity and configurability. 2. Configuration: aQuickSynopsis Automatic configuration was introduced with XFree86 4.4.0 which makes it possible to start XFree86 without first creating a configuration file. This has been further improved in subsequent releases. If you experienced any problems with automatic configuration in a previous release, it is worth trying it again with this release. While the initial automatic configuration support was originally targeted just for Linux and the FreeBSD variants, as of 4.5.0 it also includes Solaris, NetBSD and OpenBSD support. Full support for automatic configuration is planned for other platforms in futurereleases. If you arerunning Linux, FreeBSD, NetBSD, OpenBSD, or Solaris, try Auto Configuration by run- ning: XFree86 -autoconfig If you want to customise some things afterwards, you can cut and paste the automatically gener- ated configuration from the /var/log/XFree86.0.log file into an XF86Config file and make your customisations there. If you need to customise some parts of the configuration while leav- ing others to be automatically detected, you can combine a partial static configuration with the automatically detected one by running: XFree86 -appendauto If you areusing a platform that is not currently supported, then you must try one of the older methods for getting started like "xf86cfg", which is our graphical configuration tool.
    [Show full text]
  • Proceedings of the FREENIX Track: 2002 USENIX Annual Technical Conference
    USENIX Association Proceedings of the FREENIX Track: 2002 USENIX Annual Technical Conference Monterey, California, USA June 10-15, 2002 THE ADVANCED COMPUTING SYSTEMS ASSOCIATION © 2002 by The USENIX Association All Rights Reserved For more information about the USENIX Association: Phone: 1 510 528 8649 FAX: 1 510 548 5738 Email: [email protected] WWW: http://www.usenix.org Rights to individual papers remain with the author or the author's employer. Permission is granted for noncommercial reproduction of the work for educational or research purposes. This copyright notice must be included in the reproduced paper. USENIX acknowledges all trademarks herein. XCL : An Xlib Compatibility Layer For XCB Jamey Sharp Bart Massey Computer Science Department Portland State University Portland, Oregon USA 97207–0751 fjamey,[email protected] Abstract 1 The X Window System The X Window System [SG86] is the de facto standard technology for UNIX applications wishing to provide a graphical user interface. The power and success of the X model is due in no small measure to its separation of The X Window System has provided the standard graph- hardware control from application logic with a stable, ical user interface for UNIX systems for more than 15 published client-server network protocol. In this model, years. One result is a large installed base of X applica- the hardware controller is considered the server, and in- tions written in C and C++. In almost all cases, these dividual applications and other components of a com- programs rely on the Xlib library to manage their inter- plete desktop environment are clients.
    [Show full text]
  • New Evolutions in the X Window System
    New Evolutions in the X Window System Matthieu Herrb∗ and Matthias Hopf† October 2005 Abstract This paper presents an overview of recent and on-going evolutions in the X window system. First, the state of some features will be presented that are already available for several months in the X server, but not yet widely used in applications. Then some ongoing and future evolutions will be shown: on the short term, the new EXA acceleration framework and the new modular- ized build system. The last part will focus on a longer term project: the new Xgl server architecture, based on the OpenGL technology for both 2D and 3D acceleration. Introduction The X window system celebrated its twentieth birthday last year. After some quick evolution in its early years, its development slowed down during the nineties, be- cause the system had acquired a level of maturity that made it fit most of the needs of the users of graphical work stations. But after all this time, pushed by the com- petition with other systems (Mac OS X and Microsoft Windows) the need for more advanced graphics features triggered new developments. The first part of this paper is going to describe some of these features that are already available (and have been used) for a couple of years but not necessarily known by users of the X window system. A second part will address some on-going work that will be part of the X11R7 release: a new 2D acceleration architecture and the modularization of the source tree. In the third part, a complete redesign of the device dependent layer of the X server, based on OpenGL, will be presented.
    [Show full text]
  • TUGBOAT Volume 40, Number 2 / 2019 TUG 2019 Conference
    TUGBOAT Volume 40, Number 2 / 2019 TUG 2019 Conference Proceedings TUG 2019 98 Conference sponsors, participants, program, photos 101 Henri Menke / Back to the roots: TUG 2019 in Palo Alto 104 Jennifer Claudio / TEX Users Group 2019 Annual General Meeting notes General Delivery 106 Jim Hefferon / What do today’s newcomers want? Software & Tools 108 Tomas Rokicki / Type 3 fonts and PDF search in dvips 112 Arthur Reutenauer / The state of X TE EX 113 Arthur Reutenauer / Hyphenation patterns: Licensing and stability 115 Richard Koch / MacTEX-2019, notification, and hardened runtimes 126 Uwe Ziegenhagen / Combining LATEX with Python 119 Didier Verna / Quickref: Common Lisp reference documentation as a stress test for Texinfo 129 Henri Menke / Parsing complex data formats in LuaTEX with LPEG Methods 136 William Adams / Design into 3D: A system for customizable project designs Electronic Documents 143 Martin Ruckert / The design of the HINT file format 147 Rishikesan Nair T., Rajagopal C.V., Radhakrishnan C.V. / TEXFolio — a framework to typeset XML documents using TEX 150 Aravind Rajendran, Rishikesan Nair T., Rajagopal C.V. / Neptune — a proofing framework for LATEX authors LATEX 153 Frank Mittelbach / The LATEX release workflow and the LATEX dev formats 157 Chris Rowley, Ulrike Fischer, Frank Mittelbach / Accessibility in the LATEX kernel — experiments in Tagged PDF 159 Boris Veytsman / Creating commented editions with LATEX—the commedit package 163 Uwe Ziegenhagen / Creating and automating exams with LATEX & friends Bibliographies 167 Sree
    [Show full text]
  • Font Configuration and Customization for Open Source Systems
    Font Configuration and Customization for Open Source Systems Keith Packard Research Staff Compaq Computer Corporation Cambridge Research Laboratory [email protected] Font configuration and customization has traditionally been left to each application. Fontconfig is a library designed to provide a common system that can serve to ease application development and provide users with the ability to confidently install new fonts with the expectation that they will be used by most applications. Fontconfig provides the ability for multiple configuration interfaces to affect a wide range of systems without requiring custom code for each new system. Fontconfig provides a range of services to allow applications to pick those appropriate without being forced to use the entire interface. Wide acceptance of the Fontconfig mechanisms will improve system consistency without requiring a radical redesign of existing applications. 1. Introduction The original ideas for Fontconfig came about during the design and deployment of the Xft library[xft]. Xft was originally designed to connect fonts rasterized with the FreeType[freetype] library with the X Render Extension[render] to the X window system[x]. As FreeType provided no font configuration or customization mechanisms, Xft included its own. Extending the problem of font configuration by creating yet another incompatible configuration file format. During a subsequent redesign of Xft, the configuration and customization portions of the library were extracted and moved into a separate library with the idea that they would be more useful if shared with other applications. The development of Xft-based desktop environments included the ability to configure Xft font selection. The need to embed the parser for the custom Xft configuration language made it evident that a standard configuration file format was required.
    [Show full text]
  • Tutos Documentation Release 0.5
    tutos Documentation Release 0.5 kotrfa Oct 04, 2017 Contents 1 Introduction 3 1.1 Who am I?................................................3 1.2 What are these guides about.......................................3 1.3 Disclaimer................................................4 1.4 Some remarks..............................................4 1.5 My English................................................4 1.6 Feedback.................................................4 2 Necessary knowledge 5 2.1 Vim....................................................5 2.2 Systemd.................................................5 2.2.1 Example.............................................6 3 How domains, IP addresses and servers works7 3.1 Domains.................................................7 3.2 Public IP.................................................8 4 Deploying nginx + django + python 39 4.1 What this guide is about.........................................9 4.2 Prerequisites and informations......................................9 4.3 My choice - why nginx, python 3 etc...................................9 4.4 How the hell all that works........................................ 10 4.4.1 First layer (nginx)........................................ 10 4.4.2 Second layer (gunicorn).................................... 10 4.4.3 Third layer (django)....................................... 10 4.4.4 Wrapper for second and third layer............................... 10 4.5 Let’s do it................................................. 10 4.5.1 nginx configuration......................................
    [Show full text]
  • Keith Packard
    Keith Packard [email protected] July 29, 2005 Experience HP (via Compaq) (12/01-present) Member of the Cambridge Research Laboratory. Research projects focused on user interfaces in all guises, from tiny embedded computing devices running either custom operating systems or uCLinux through multi-machine projector-based media walls. X window system research included the design and implementation of the X Com- posite and X Damage extensions which provide for manipulation of application presen- tation through external applications enabling a wide range of new user environments. This novel new architecture provides capabilities far in excess of those available in other window systems while remaining compatible with existing applications. Designed and implemented the cairo 2D rendering library supporting X, PostScript, PDF, Windows and Mac OS X output while providing best in class rendering using a PDF 1.4 compatible imaging model. Encouraged adoption of this library by many major free software projects, including Gtk+, Mozilla, Mono and Inkscape. Developed new font naming and selecting library called fontconfig to unify appli- cation use of fonts in free software systems. Promoted library to free software projects by providing relevant patches to their code, including Mozilla, Qt, Gtk+, Tk and X. Fontconfig is now used across all of these applications as the fundemental font config- uration mechanism, eliminating a common source of font access difficulties. SuSE, Inc (11/99-11/01) Enhanced the XFree86 implementation of the X Window System. Designed and im- plemented a new rendering extension. Built a new X driver architecture for embedded devices. Wrote and presented numerous papers at technical and industry conferences.
    [Show full text]