DOCSLIB.ORG

126 Technology Table Power Options

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
126 Technology Table Power Options Technology Table Power Options P-1 Power Module Power supply and interconnecting device to mainframe or network computer systems.Provides four auxiliary grounded, 15 amp receptacles and a blank telecom plate. Designed to work inside T1 style Technology Trough. Available in Matte Black. UL Listed P-2 Power Module A low profile, table top system. Opening the hinged lid reveals angled power and data plates; configured standard with four 15 amp power receptacles and cutouts for up to four configurable telecom plates. Availble in a black textured finish and black smoked, frosted glass and aluminum access door. CSA Listed P-3 Power Module Low profile steel system with a top that pivots up for use. Standard includes two 110 volt electrical outlets, one RJ-11 and one RJ-45 data modules and 10 foot power cord. UL and CSA Listed P-14 Power Module The next generation of flexible tabletop power and data solutions for executive and institutional work station applications. Retractable and durably constructed, a highly functional with a fluid, one touch door that remains open during use. Standard with two power outlets, two powered usb and one blank slot. UL Listed P-5 Power Module A 30” decorative table top power module incorporates modern design elements to provide an elegant solution. The P-5 incorporate an integral two door aluminum lid with dampened release action which retracts into the table when opened to maximize table work surface and compliment any table design. Standard with 12 power receptacles and 4 telecom plates. Fully flexible, P-5 Power Module can be customized with up to 16 power receptacles or 12 fully configurable telecom plates depending on your individual requirements. Available in a Black Anodized Aluminum or a Silver Aluminum. UL Listed made in the USA 20485 144th Ave NE Woodinville WA 98072 T 425.402.8001 F 425.402.8985 corianderdesigns.com 126 P-1 conference table power info Jacks and Descriptions Jack ECA# Description Telecom Plate Type Mini-Stereo Connectors P-1 Power Module A “A” Plate Inline L Mini StProvidesereo Inline F a/F Power supply and interconnecting device to mainframe C37 Mini Storere onetwork F/F comm ocomputernscope systemsB using four “B ”auxiliary Plate grounded, 15 amp receptacles and a blank telecom plate. Designed to work Q “Q” Plate Solder 4 Mini Stinsideereo T1 style Technology Trough. Available in Matte Black. 86 ¼ Stereo Female C Lucent (Avaya) 3 Port 010-0404 UL Listed D Siemon 4 Port 010-0406 Jacks andUSB/Fir Descriptionsewire E Amp 2 Port 010-0405 Connectors Jack ECA# Description Telecom Plate Type F Leviton Black 2 Port 010-0407 G Krone 3 Port 010-0408 Mini-Stereo Connectors 102 USB Type “A” w/wires Inline L Mini Stereo Inline F/F A “A” Plate H Siemon CT Plate 010-0409 C7 Firewire panel Mount Type 1 C37 Mini Stereo F/F commonscope B “B” Plate I Panduit 4 Port 010-0410 Inline C9 USB A/B Inline in XLR body Solder 4 Mini Stereo Q “Q” Plate C27 USB Inline L-Com Body K Leviton White 2 Port 010-0413 86 ¼ Stereo Female C Lucent (Avaya) 3 Port 010-0404 L Leviton Black 4 Port 010-0414 D Siemon C25 4 PortUSB In01line0- 0X4L0R6 Body Silver USB/Firewire M Ortronics Black 3 Port 8965-0519 Video ConEn ec tors Amp 2 Port 010-0405 Connectors Inline 10 S-Video (SVHS) N Nordox 3 Port 010-0416 F Leviton Black 71 2 PorS-Vt ide01o (SVHS)0-0407 Siemon Black G Krone 3 Port 010-0408 102 USB Type “A” w/wires XLR Connectors R Ortronics Dual 2 Port 010-0419 Solder H Siemon CT Pla1te3 3 Pin XLR010 -F0e4male09 C7 Firewire panel Mount Type 1 S Krone TWehlietec om P3l aPtoert Cuto01u0t -D04i2m2 ensions I Panduit 41 4 Por3t Pin X01LR0 -M04a1le0 Inline C9 USB A/B Inline in XLR body C28 3 Pin XLR Female Silver C27 USB Inline L-Com Body K Leviton White 2 Port 010-0413 25 4 Pin XLR Female C25 USB Inline XLR Body Silver L Leviton Black 4 Port 010-0414 42 4 Pin XLR Male Video Connectors M Ortronics Black 3 Port 8965-0519 Inline 10 S-Video (SVHS) N Nordox C33 3 Port4 Pin X01LR0 -Bl04k1 w/6 Gold Pins 71 S-Video (SVHS) Siemon Black C14 5 Pin XLR Female XLR Connectors R Ortronics Dual 2 3 2 Port6 Pin X01LR0 -F0e4m19a le Solder 13 3 Pin XLR Female S Krone TWehlietec oWm P3l aPtoer6t CPiunt Xo01LuR0t -SD0m4i2ma2ll e Bnosdiyo ns 41 3 Pin XLR Male P-1 Data Knock out Dimensions P-1 Data Plate Dimensions 66 3 Pin Mini XLR Female Telecom Plate Dimensions C28 3 Pin XLR Female Silver 33 4 Pin Mini XLR 25 4 Pin XLR Female C11 4 Pin Mini XLR Male 42 4 Pin XLR Male 67 5 Pin XLR Female C33 4 Pin XLR Blk w/Gold Pins Miscellaneous Connectors 69 BNC Siemon Black C14 5 Pin XLR Female C 8 Pin Neutrik Female 23 6 Pin XLR Female D Door Siemon Black W 6 Pin XLR Small Body Inline TelC17eco m PHDMIlate FFDi mConnector*ensions 66 3 Pin Mini XLR Female *Indicates connector cannot be used in ECA Concept or Corner Power Column 33 4 Pin Mini XLR C11 4 Pin Mini XLR Male 67 5 Pin XLR Female 20485 144Th Ave Ne Woodinville Wa 98072 | T425.402.8001 | F425.402.8985 | corianderdesigns.com Miscellaneous Connectors 69 BNC Siemon Black C 8 Pin Neutrik Female D Door Siemon Black Inline C17 HDMI FF Connector* *Indicates connector cannot be used in ECA Concept or Corner Power Column P-2 conference table power info Jacks and Descriptions Jack ECA# Description Telecom Plate Type Mini-Stereo Connectors P-2 Power Module A “A” Plate Inline L Mini StereoA In lowline F /profile,F table top system. Opening the hinged lid reveals angled power and C37 Mini Stereodata F/F c oplates;mmonsco configuredpe standardB with “ Bfour” Plate 15 amp power receptacles and cutouts for up to four configurable telecom plates. Availble in a black textured finish and Q “Q” Plate Solder 4 Mini Stereoblack smoked glass, frosted glass and aluminum access door. 86 ¼ Stereo Female C Lucent (Avaya) 3 Port 010-0404 CSA Listed D Siemon 4 Port 010-0406 Jacks andUSB/Fir Descriptionsewire E Amp 2 Port 010-0405 Connectors Jack ECA# Description T elecom Plate Type F Leviton Black 2 Port 010-0407 G Krone 3 Port 010-0408 Mini-Stereo Connectors 102 USB Type “A” w/wires Inline L Mini Stereo Inline F/F A “A” Plate H Siemon CT Plate 010-0409 B I N“BT” C7PElRate F ACF Eire wI iUre Tp ane l Mount Type 1 C37 Mini Stereo F/F commonscope Specification Sheet I Panduit 4 Port 010-0410 Inline C9 USB A/B Inline in XLR body Solder 4 Mini Stereo Q “Q” Plate C27 USB Inline L-Com Body K LevitonInterface White I2 UT Po rTrimt 01Pivot0-04 1Kit3 86 ¼ Stereo Female C Lucent (Avaya) 3 Port 010-0404 Specification Sheet C25 USB Inline XLR Body Silver L Leviton Black 4 Port 010-0414 D Siemon 4 Port 010-0406 Aluminum Bands Each Side USB/Firewire M Ortronics Black 3 Port 8965-0519 Video ConnectorsE 6.68 Amp 2 Port 010-0405 Connectors Inline 10 S-Video (SVHS) N Nordox 3 Port 010-0416 15.19 F Leviton Black 2 Port 010-0407 Glass, Wood or 71 S-Video (SVHS) Siemon Black Aluminum Top G Krone 3 Port 010-0408 102 USB Type “A” w/wires XLR Connectors R Ortronics Dual 2 Port 010-0419 Solder H Siemon CT13 Plate 3 Pin XLR Fe01male0-0 409 C7 Firewire panel Mount Type 1 S Krone TWehlietec om P3l aPtoer t Cuto01u0t -D04i2m2 ensions I Panduit 41 34 Pi Pno rXt LR M01ale0 -0410 Inline C9 USB A/B Inline in XLR body K Leviton WCh2it8e 32 Pi Pno rXt LR Fe01m0a-le0 4S1i3lv er C27 USB Inline L-Com Body 13.75 25 4 Pin XLR Female C25 USB Inline XLR Body Silver L L13.39evit on Black 4 Port 010-0414 42 4 Pin XLR Male 6.38 Video Connectors M Ortronics Black 3 Port 82.85965 -0515.809 Inline 10 S-Video (SVHS) N Nordox C33 43 Pi Pno rtX LR Bl01k w/0-G04o1ld6 Pins 71 S-Video (SVHS) Siemon Black ProductC14 Specifications5 Pin XLR Fe male Shown with optional Tel-com plates and connectors Product Specifications XLR Connectors R Ortronics2 D3 ual 62 Pi Pno rtX LR Fe01m0a-le0 419 Solder 13 3 Pin XLR Female Standard finish is black powder coat with light textured or brushed stainless steel • Fits standard Interface I UT cutout (13-3/4” x 6-3/8”) S Krone TWehWliet ec om P63 lPi aPntoe rXt LCRu Stom01ua0tll - DB04oi2md2y ensions • Top material can be glass, brushed aluminum or any manufactured 41 3 Pin XLR Male AvailableP-5 Data as corded Knock or hard outwired Dimensions P-5 Data Plate Dimensions Installer can fabricate lid as needed or use Lid Pivot material cut to ¼” T thicknesselecom (Note: Pla Woodte D itopsme maynsi haveons to be Assembly available66 from ECA3 Pi n Mini XLR Female rabbeted to ¼” on ends) C28 3 Pin XLR Female Silver • Top size is 12-13/16” x 5-3/4”. Recommended table cutout 13-3/4” x 6-3/8” • ECA does not offer wood tops. 33 4 Pin Mini XLR 25 4 Pin XLR Female Corded units and Hard Wired units are CSA Certified • Aluminum side pivot assemblies are satin brushed aluminum.
Load more

Recommended publications
  • Mobile Consumer Products
    Mobile Consumer Products www.amphenol.com.tr [email protected] Mobile Consumer Products Mobile Devices Amphenol Mobile Consumer Products (MCP) provides a broad range of components with content on the majority of the world’s mobile devices produced each year. Amphenol MCP designs and manufactures a full range of electro -mechanical interconnect products and antennas found in mobile phones, tablets, wearables and other mobile devices. Our broad product offering includes antennas, RF cables, RF switches, internal and external connectors, LCD connectors, board-to-board connectors, cord sockets, battery connectors, input -output connectors, charger connectors, metal and ceramic injection molded components, touch panels and electromechanical hinges. Our capability for high -volume production of these technically demanding, miniaturized products, combined with our industry-leading ability to react quickly to frequently changing customer requirements together with our speed of new product introduction are the critical factors for our success in this market. Amphenol MCP Locations n Sales Location n Sales and R&D Location n Sales, R&D and Manufacturing Location 2 www.amphenol.com.tr [email protected] 3 Mobile Consumer Products MIM CIM Moving (Metal (Ceramic Touch Acrylic Sheet Sapphire Mobile Cables Antennas Mechanisms Injection Injection Panels Lens (IMD) Glass Connectors Assemblies Molding) Molding) MCP Hong Kong HQ MCP USA HQ (IL) Shanghai Amphenol Airwave Amphenol USA (IL, CA, MI) Amphenol Finland Amphenol Qujing Tekhnology Amphenol Shanzhen Amphenol Beijing Amphenol Hangzhou Phoenix Amphenol Tianjin Amphenol Changzhou Amphenol Japan Amphenol South Korea Amphenol Taiwan Amphenol Malaysia n Sales Location n Sales and R&D Location n Sales, R&D and Manufacturing Location 2 www.amphenol.com.tr [email protected] 3 Mobile Devices Mobile Consumer Products Amphenol MCP uses state of the art technology to consistently produce high quality components for mobile applications.
    [Show full text]
  • 2142441-Broadcast Catalog
    Everything rides on your connections Choose the rugged reliability and proven quality of Pomona for: • Video and audio broadcast • Home entertainment • Multi-purpose systems Outstanding value, superior design. Ask your distributor about Pomona. Professionals Trust Pomona PerformanceVideo Broadcast The quality broadcast and audio experts demand Why do so many experts depend on Pomona? World-class design Pomona’s team of electronics and mechanical designers focus on the details. That pays off in performance. By machining metal parts instead of die-casting, for example, they Pomona, your source for high-performance audio, engineer more durable connections and ensure high reliability over the life of the part. video and multimedia connectors Fast and easy to install You don’t have to gear up with special crimp tools to install Pomona parts. In fact, our F connectors require no crimping at all. Broad selection You’ll find accessories for virtually any broadcast equipment application. From a wide selection of 75 connectors and Ω Fast, custom orders Need a custom cable assembly? Ask Pomona. We deliver high-quality, custom orders, our famous banana plugs, to rugged and economi- fast. We’ll gladly add logos or other special marks, too. cal XLR connectors and assemblies, Pomona Outstanding value Why pay more? Pomona products deliver the superior design and construction your delivers quality at an outstanding value. Our broad applications demand at an outstanding value. new line of connectivity products for audio, video, and multimedia was designed specifically for the rigorous demands of your world. Electronics test engineers and technicians around the world have trusted Pomona’s connectivity solutions for more than 50 years.
    [Show full text]
  • L-1161 Conference Room & Community Room Audio-Visual Upgrades
    BID DOCUMENTS COVER SHEET CONTRACT DOCUMENTS FOR L‐1161 CONFERENCE ROOM & COMMUNITY ROOM AUDIO‐VISUAL UPGRADES AT Los Medanos College 2700 East Leland Road, Pittsburg, CA 94565 CONTRA COSTA COMMUNITY COLLEGE DISTRICT Consists of the following: VOLUME 2 DRAWINGS DSA Appl. #01‐119293 Architect: SMITH, FAUSE & McDONALD, INC. San Francisco, CA 94103 Tel (415) 255‐9140 February 19, 2021 COMMUNITY AND CONFERENCE ROOMS AV UPGRADES LOS MEDANOS COLLEGE 2700 E. LELAND ROAD, PITTSBURG, CALIFORNIA LOCATION MAP VICINITY MAP INDEX OF DRAWINGS D SEALS AND SIGNATURES C ISSUE SCHEDULE NO. DATE PLAN REVIEW SUBMITTAL V1 12/30/2020 PLAN REVIEW SUBMITTAL V2 02/03/2021 ABBREVIATIONS LEGEND/ SYMBOLS DEFINITIONS GENERAL NOTES PROJECT DESCRIPTION SCOPE · · · · B · APPLICABLE CODES & STANDARDS · · · BUILDING TYPE SUMMARY · LOS MEDANOS COLLEGE PROJECT TEAM CLIENT ELECTRICAL COMMUNITY ROOM & CONFERENCE ROOM AV UPGRADES A SHEET TITLE: ARCHITECTURAL COVER SHEET AUDIO VISUAL 100% CONSTRUCTION DOCUMENTS SCALE: AS SHOWN PROJECT NUMBER: 01-119293 SHEET NUMBER: G-001 10/26/20 1 2 3 4 5 D SEALS AND SIGNATURES THE HATCHED AREA IS NOT IN CONTRACT C U.O.N. ISSUE SCHEDULE NO. DATE PLAN REVIEW SUBMITTAL V1 12/30/2020 PLAN REVIEW SUBMITTAL V2 02/03/2021 KEY PLAN B PROJECT TRUE NORTH NORTH LOS MEDANOS COLLEGE COMMUNITY ROOM & CONFERENCE ROOM AV UPGRADES A SHEET TITLE: OVERALL INFO. RESOURCE CENTER FIRST FLOOR FLOOR 100% CONSTRUCTION DOCUMENTS NORTH PLAN OVERALL INFORMATION RESOURCE CENTER FIRST FLOOR FLOOR PLAN FULL CAMPUS SITE PLAN SCALE: AS SHOWN 2 1 NORTH 1/8" = 1'-0" 1/8" = 1'-0" PROJECT NUMBER: 01-119293 SHEET NUMBER: A111 10/26/20 1 2 3 4 5 D 30" CLR.
    [Show full text]
  • User Manual Important Safety Instructions
    1 Mic-In / 1 Instrument-In, 2 Out professional recording USB interface with smart phone connectivity for live streaming application User manual Important Safety Instructions 1. Read this manual thoroughly before using this unit. 2. Keep this manual for future reference. 3. Take notice of and comply with all warnings included in the user's manual or indicated on the appliance. 4. Follow all instructions included in this manual. 5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this unit. 6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft cloth. 7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install in accordance with the manufacturer's instructions. 8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat- producing appliances. 9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. These are designated for your safety. If the provided plug does not fit into your outlet, consult an electrician. 10. Protect the power cord from being walked on or otherwise damaged by items placed on or against them. Particular attention should be given to the plugs, receptacles, and the point where the cord exits the appliance. 11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in operation.
    [Show full text]
  • 1-Mobile Phone, Cover.Qxd
    RoHS Ready Products for Mobile Equipment TYCO ELECTRONICS “TECHNOLOGY PORTFOLIO” ● Connector Systems / ● Antennas, GPS Antennas, ● Battery Connectors & Electromechanical Components Integrated Antenna Systems Assemblies ● Relays ● Circuit Protection Devices ● Heat Sinks & Thermal Solutions ● Wireless Products ● Tubing & Harnessing Products ● Switches and Knobs ● Sensors ● Touch Screen Displays ● Identification Labeling Products ● Fiber Optic Products ● Power Systems ● Racks & Panels ● Wire & Cable ● Electronic Modules ● Smart Cards / Leadframes ● Application Tooling ● Resistors & Inductors TYCO ELECTRONICS “AT YOUR SERVICE” Tyco Electronics Online The Tyco Electronics website is an innovative and @ interactive source for application information, product updates and technical solutions. Our step-by-step software makes our website intuitive and user-friendly to better serve you ! Please contact us at : www.tycoelectronics.com Internet Homepage Product Information Center www.tycoelectronics.com (PIC) Electronic Internet Catalog You can rely on Tyco Electronics PIC Team to provide you support for answers to your www.catalog.tycoelectronics.com general information or technical questions in an efficient and effective manner. To reach our PIC staff, please contact your local Tyco Electronics organization. Product Literature For more information about Tyco Electronics and its wide range of products we offer you a variety of literature such as product catalogs and a lot of product specific brochures. For catalogs and product brochures please contact your local Tyco Electronics organization. All specifications subject to change. Consult Tyco Electronics for latest specifications. 1 2 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Introduction Tyco Electronics supplies a unique expertise for today’s and tomorrow’s mobile equipment applications, including cellular phones, mobile media players, digital camera’s, GPS, payment terminals and other portable electronics.
    [Show full text]
  • Device Interconnection
    Device Interconnection An important, if less than glamorous, aspect of audio signal handling is the connection of one device to another. Of course, a primary concern is the matching of signal levels and impedances between the devices, but there are additional considerations. Not only are wire and connectors of differing types involved, the grounding of a device is potentially affected by all the other equipment to which it is connected. Interconnection practices are important because all signals must be transmitted from device to device and noise added in the process can be very difficult to eliminate once it becomes part of the signal. By using properly shielded and grounded connec- tions, a high quality audio signal can be preserved, even in very large systems. While this discussion relates to analog connections, there are similar concerns in digital systems that we will address later. Shielding: Noise sources couple into wires by induction (like a transformer) and by capacitive coupling. These noise signals are produced by the 60 Hz power-lines, by radio transmitters, computers, electric motors, and many other electrical sources present in the environment. Shielding is a method of protecting audio signals from radiated noise by providing a low impedance pathway to ground for the unwanted electromagnetic sig- nals. Audio signals are always transmitted on shielded cable (except for high power, high level, low impedance signals like power amplifier connections to speakers), thereby reducing or eliminating the problem of noise coupling. The shield is usually a braid of copper wire (or metal coated plastic) surrounding the wire or wires that conduct the audio signal.
    [Show full text]
  • JK Audio CELEBRATING Our 16Th YEAR
    JK Audio CELEBRATING OUR 16TH YEAR www.jkaudio.com JK Audio 1 Contents I was watching the evening news as they cut to a locker room interview. A few years ago you would have seen a dozen hands holding micro- phones with radio and television station logos. While the TV mics are clearly visible, the radio station identity has been lost in a sea of hand- held digital recorders. One might argue that the subject of the interview might even respond dif- ferently if they were speaking into a “live” mic versus a recorder. For our friends in the ENG truck, you’ve got to check out RemoteAmp Blue for The talent holding the microphone is what sepa- those last minute, “grab the camera”, no time for IFB moments. We offer a true rates the amateur reporter from the veteran. IFB connection from your Bluetooth equipped cell phone. Go ahead, place a Don’t get lost in a sea of recorders. Stand proud with your microphone in hand, camera down the street using a cell phone for quick IFB. connected to your JK Audio BluePack, sending live audio to the station while Joe Klinger capturing the moment on your favorite (out of sight) recorder. President [email protected] On The Web Radio AV/Telecom Be sure to check out our web site. BluePack. .5 RemoteAmp Blue. 4 We keep it up to date with: RemoteAmp Two. .6 BluePack. .5 Daptor Three. 7 RemoteAmp Two. .6 • New product information RemoteMix 4. .8–9 Daptor Three. 7 RemoteMix 4. .8–9 • FAQ (Frequently Asked AutoHybrid.
    [Show full text]
  • Adobe Acrobat .Pdf
    Pennsylvania ACEP 2001 ED Informatics Symposium Page 1/2 Computer Terminology Reference 2.2 Keith Conover, M.D., FACEP ADSL Asymmetric Digital Subscriber Line (form of CRT Cathode Ray Tube: standard type computer Firewire IEEE 1394 serial port (faster than USB) DSL) monitor display FLOPS Floating Point Operations/Second AFAIK (as far as I know; email) CPU Central Processing Unit FPM Fast Page Mode (RAM) AGP Advanced Graphics Port CSID Call Subscriber ID (for FAX and phone caller FYI For Your Information AIM AOL Instant Messenger ID) GIGO Garbage In, Garbage Out ALT. ALTernate lifestyle (USENET newsgroup CSLIP Compressed Serial Line Interface Protocol GIS Geographic Information System category) [Internet] GNU Gnu's Not Unix (operating system that really ANSI American National Standards Institute CSV Comma-Separated Value/Variable (file type) IS Unix) AOL America Online CTRL Control (computer keyboard key) GPS Global Positioning Satellite/System ARQ Automatic Repeat Request CYMK Cyan-Yellow-Magenta-Black (color model) GUI Graphical User Interface ASCII American Standard Code for Information DAC Data Acquisition and Control + Digital to GW-basic Gee Whiz BASIC Interchange Analog Converter HDSL High-Data-Rate Digital Subscriber Line ASP Association of Shareware Professionals dB Decibel (DSL) + High-Speed Digital Subscriber ASPI Advanced SCSI Programming Interface DBMS Data Base Management System Loop [Adaptec] DCD Data Carrier Detect HDTV High Definition Television ATA Advanced Technology Attachment (original DCE Data Communications Equipment
    [Show full text]
  • BSS Session 3 Activity UPDATED
    SESSION 3 ACTIVITY: SOUND BOARD TUTORIAL LIVE SOUND 101 For this activity, you will need a desktop computer or laptop. Go to: 1 h t t p : / / s o u n d w o r l d . j d s t a l l i n g s . c o m Short for public address system, Please note that this program has not yet been optimized for touch screens, so it must be done on a computer. PA systems are used to project The web address will take you to sounds to a large group of people from SoundWorld 5000, an online virtual instruments, voices and other acoustic sound board activity. performers. PA systems are used The webpage will have a sound everywhere, from schools and board in the middle, with cables theatres to arenas and airports. and wires to the left of the page, and speakers and equipment will PARTS OF PA SYSTEM be to the top and right. MIXER: Adjusts EQ and effects, can be Click a cable to select it, then drag between desired connections for all controlled on stage or at a mixing desk by 2 inputs, outputs and power. Each cable is color-coded. an audio engineer. Below is a description of each cable's function to help you complete the activity successfully. MICROPHONE: Captures audio by converting sound waves into electric Cables & Wires currents that can be amplified, transmitted Power cable: electrical cable that connects the system to the electricity supply via wall socket or extension cord. or recorded. 1/4-Inch Phone Connector: perhaps the most common connection to be found on SPEAKER: Converts electric signals into musical equipment, it can connect headphones, amplifier inputs, and even powered sound waves; front of house (FOH) speakers to the sound board.
    [Show full text]
  • U168 XT Professional 24-Bit USB Audio Interface with 16 Inputs / 8 Outputs
    U168 XT Professional 24-bit USB Audio Interface with 16 Inputs / 8 Outputs U168 XT is a USB 2.0 Hi-Speed audio interface for Mac and PC, bringing USB audio technology to a new level by providing better performance for better results. This interfaces provides not less than 16 input channels and 8 output channels that are all available for simultaneous usage. The 24-bit / 96kHz solution not only provides balanced 1/4" TRS line connectors, it also includes 4 integrated microphone preamps with XLR inputs on the front of the unit with switchable +48V phantom power, 2 Hi-Z instrument inputs for electric guitars as well as coaxial digital S/PDIF input and outputs. There are two independent headphone outputs on the front, next to an integrated monitoring mixer. External keyboards, synthesizers and sound modules can be connected via the MIDI inputs and outputs on the backside of the unit. U168 XT provides fast high performance low latency drivers based on our EWDM and DirectWIRE technology with support for the latest WDM, ASIO 2.0 and CoreAudio technology for both Mac and PC, making it possible to use the interface with all current standard audio applications available for professional usage. All this makes the stylish U168 XT an audio interface, bringing USB audio for professional applications to a new level. With the bundled software you can start using it right away and simply start working out of the box! FRONT BACK Features 16 input / 8 output 24-bit / 96kHz USB 2.0 Hi-Speed 24-bit Audio Interface 4 professional microphone preamps with +48V
    [Show full text]
  • Firewire Solo™
    FIREWIRE SOLO™ Quick Start Guide This guide is intended to help get you started quickly. In order to achieve optimal usage of your new FireWire Solo, we recommend that you carefully study the enclosed product manual, either after completing the process described in this guide or before. Table of Contents Introduction ...................................................................................................................... 3 Minimum System Requirements .................................................................................... 4 Windows ......................................................................................................................... 4 MacOS ............................................................................................................................ 4 Front Panel Controls and Connectors ............................................................................ 4 Rear Panel Connectors .................................................................................................... 5 Hardware Installation ..................................................................................................... 5 Software Control Panel .................................................................................................. 6 Mixer Page ..................................................................................................................... 6 Hardware Page .................................................................................................................7
    [Show full text]
  • Background & Objective Choosing the AV Output
    Background & Objective Many of us have an iPhone or other smartphone, and there are many options out there to mount the phone in a location visible to the drive so as to allow using the GPS and music functions. I wasn’t eager to disrupt the interior of the car and it seemed that most of the necessary components were already present, the stereo, the LCD display, etc., and all I needed to do was connect them together in the way that I wanted. There are a number of possibilities described in the forums, many with detailed write ups, but none achieved quite what I was looking for. It also happens that I installed Bluetooth at the same time as the AV upgrade, but the two don’t have much interaction so I will describe them separately. I was looking to fully integrate an iPhone into the existing car without doing a substantial upgrade to the stereo head unit and while maintaining the factory look and feel of the interior. In my case I have an iPhone, but there would be little difference in the installation for an Android or other modern smartphone that has an HDMI output. Basically everything could be done the same except for the last bits that have the iPhone specific connector. The project began with a 2003 XKR coupe that had factory navigation and premium audio. The car had provision for a factory phone, meaning it was wired for the connections and microphone, but never had a phone module or handset installed. There are a few well documented steps that I won’t spend much time describing, in particular the installation of the video input to the Nav display using a PAC VCI-X.
    [Show full text]