DOCSLIB.ORG

Connectable Load Test up to 1050 W Safety Casing Made of Solid Rubber

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Connectable Load Test up to 1050 W Safety Casing Made of Solid Rubber Voltage tester Prüfball SPB Voltage tester MultiSafe DSP 4 Voltage tester MultiSafe DSP 5 Voltage tester ProfiSafe LSP Electricity meter tester ZAP SPB-HW für Hochwasser Safety casing made of solid rubber Wide measurement range from 10 mV up to 1200 V Precision and safety up to 1200 V AC / 1500 V DC Compact and maintenance-free Connectable load test up to 1050 W Fire Department Special The Prüfball analog is the voltage tester for use in The MultiSafe DSP 4 is a versatile, robust and safe testing tool The DSP 5 is a versatile, very robust and completely safe The ProfiSafe is a compact tester for voltage The Prüfball ZAP is a safe electricity meter tester for power supply - robust, accurate, maintenance-free. for industrial and power applications. testing tool with multimeter precision. and continuity without battery. commissioning electricity meters, combined with a Electricity in the water? The CAT IV 1000 V certification guarantees highest safety. high-quality voltage tester. Safe test of whether flooded ▪ safety casing made of solid rubber, extremely impact ▪ large illuminated display ▪ voltage indication from 12 V up to 690 V AC/DC basements can be safely entered resistant, water and dustproof 10 mV up to 1500 V DC large illuminated two colour display and pumped out. ▪ phase and phase sequence tests 1 V up to 1200 V AC 10 mV up to 1500 V DC ▪ exact measuring units with direct display without ▪ up to 10 kHz extra accurate range up to 19.99 V DC contiuity tester warning of DC and AC voltages, buttons, 20 - 500 V or 50 - 1000 V AC / DC ▪ ▪ 100 mV up to 1200 V AC e.g. solar plants and house phase and phase sequence tests illuminated LCD ▪ phase and phase sequence tests ▪ up to 10 kHz ▪ power supplies continuity tester with without battery, contiuity tester ▪ phase and phase sequence tests ▪ integrated self-test ▪ value 1 kΩ up to 2 MΩ ▪ NEW maintenance-free lifelong ▪ acoustic signal (500PRA) fast continuity tester with ▪ hold function for saving ▪ maintenance-free due to longlife battery ▪ value 0,01 kΩ up to 1000 kΩ ▪ ▪ with or without additional load the measured value 30 mA-RCD-tripping ▪ front light ▪ maintenance-free due to ▪ additional load longlife battery or accu 30 mA-RCD-tripping SPB Analog Accessories ▪ safety casing made of solid rubber, extremely impact SPB Digital resistant, water and dustproof ▪ analog or digital indication of voltage from More safety through special accessories DSP 4ST with 20 V up to 500 V adjustable electrode length ▪ phase, phase sequence and contiuity tester ▪ additional load 350 W or 1050 W for fast start-up tests of electricity meters ▪ maintenance-free due to longlife battery or accu rear buttons for additional load ZAP 350 ZAP 350L ZAP 1050L ProfiSafe LSP 4L Extensions for Adapters and flexible Bags and cases overhead lines or probes for tight Colour change at switchgears terminal strips and hazardous voltage test holes Ex-Multimeter VarioSafe Ex-Resistance tester High voltage tester HS 5 / HS 11 High voltage tester HS 36 Telescope voltage tester TT Multimeter for mining and chemistry Earth resistance tester EP 4 and EP 4Ex High voltage tester 5 or 11 kV AC/DC High voltage tester 36 kV AC/DC Telescope voltage tester from 1 - 36 kV Your partner for voltage testing The VarioSafe EXM offers the highest level of safety in voltage The ΩMegaSafe EP 4 is a handy ohmmeter for The MultiSafe HS11 / HS5 is a two-pole high-voltage tester For safe and quick testing of voltages up to 36 kV for safe and easy testing at high test heights. tests using test probes with encapsulated protective resistors. quick testing according to VDE 0413-4 of with safe LED signal and precise display of voltage level and against earth. protective and earthing cables, equipotential frequency. ▪ precise display of voltages up to ▪ approved for intrinsically safe and non-intrinsically safe bonding and lightning protection cables ▪ precise display of voltages up to 36 kV 1000 / 3000 / 36000 V AC/DC circuits up to 2000 V according to ATEX Directive 94/9 EC also in hazardous areas. AC/DC and frequencies 0 - 100 Hz ▪ precise display of AC and ▪ safe testing up to 6 m / 8 m / 10 m safe and universal from 10 mΩ to 2 MΩ DC voltages highest safety through molded protective resistors ▪ ▪ highest safety due to encapsulated protective highest safety due to encapsulated ▪ resistors in the double-walled GRP pipe ▪ robust housing made of antistatic plastic ▪ high test current 0,2 A ▪ highest safety due to molded protective resistors directly in the ▪ protective resistors in the easy operation and automatic ▪ surge voltage resistance> 300 kV probe, max. current < 3.5 mA ▪ GRP pipe measurement process ▪ different versions, simple design or compact and divisible ▪ integrated self-test for functional testing ▪ higher safety thanks to with transport length 900 mm two-color display ▪ higher safety thanks to two-color display higher safety thanks to two-color display also as ▪ NEW NEW fast measurement voltage no voltage and four times longer battery life NEW Insulation Testers High ohm meter for tests according to VDE 0413-2 of insulation and bleeder resistors. 360 ° illuminated band and display lights up red / green ▪ safe and universal from 1 kΩ to 2 TΩ VarioSafe EXM 25 ▪ testvoltage up to 360 ° illuminated band EXM 24 500 V (Ex) or 1000 V and display lights up red / green ▪ external voltage warning and integrated voltage display MultiSafe HS11 MultiSafe HS5 MultiSafe HS36 11 kV AC/16 kV DC 5 kV AC/7 kV DC also as Product Overview 2018 / 2019 Quality creates safety MultiSafe TT 1 for 1 kV Voltage tester - High voltage tester - Ex-testing devices Rudolph Tietzsch GmbH & Co. KG TT 3 for 3 kV Willringhauser Straße 18 TT 36 for 36 kV D-58256 Ennepetal NEW Germany up to 1000 V Fon +49 2333 75989 test voltage Fax +49 2333 75257 [email protected] Made in Germany www.tietzsch.de.
Load more

Recommended publications
  • Design Electricity Meters with Kinetis M Series Mcus FTF-SEG-F0469
    Design Electricity Meters with Kinetis M Series MCUs FTF-SEG-F0469 Felix Wang | Senior Global Product Manager Martin Mienkina | Senior Member of Technical Staff M A Y . 2 0 1 4 TM External Use Session Objectives • Understand electricity meter block diagram and major functionalities • Familiarize with Kinetis M series MCUs • Become familiar with Freescale electricity meter reference designs, HW/SW development tools and algorithms offering • Mastering MCU programming… Tutorial • Ideal Hilbert Transformer Kinetis M series products are designed for next-generation smart meter applications. The cost-effective Kinetis M series MCUs combine a sophisticated analog front end (AFE), hardware tamper detection and low-power operation to enable the design of secure, high-accuracy 1-, 2- and 3-phase electricity metering solutions. Freescale also provides proven 1-, 2-, and 3-phase hardware reference designs with complex metrology firmware satisfying 0.1% measurement accuracy and all ESD requirements. Traditional smart metering designs typically employ two chips to separate user billing software from the main application code, as required by WELMEC, OIML and other global standards. However, Kinetis M series MCUs handle this task with a single chip due to their on-chip memory protection unit, peripheral bridge, protected GPIO and DMA controller. To guard against external tampering, M series MCUs include active and passive tamper pins with automatic time stamping throughout, including on the independent real-time clock (iRTC). In addition, a random number
    [Show full text]
  • Smart Metering for Smart Electricity Consumption
    Master Thesis Electrical Engineering May 2013 Smart Metering for Smart Electricity Consumption Praveen Vadda Sreerama Murthy Seelam School of Computing, Blekinge Institute of Technology, 37179 Karlskrona, Sweden i This thesis is submitted to the School of Computing at Blekinge Institute of Technology in partial fulfillment of the requirements for the degree of Master of Science in Electrical Engineering. The thesis is equivalent to 20 weeks of full time studies. Contact Information: Authors: Praveen Vadda Address: Karlskrona, Sweden E-mail: [email protected] Sreerama Murthy Seelam Address: Karlskrona, Sweden E-mail: [email protected] University advisor: Prof. Markus Fiedler School of Computing (COM) School of Computing Internet : www.bth.se/com Blekinge Institute of Technology Phone : +46 455 38 50 00 371 79 Karlskrona Fax : +46 455 38 50 57 Sweden ii ABSTRACT In recent years, the demand for electricity has increased in households with the use of different appliances. This raises a concern to many developed and developing nations with the demand in immediate increase of electricity. There is a need for consumers or people to track their daily power usage in houses. In Sweden, scarcity of energy resources is faced during the day. So, the responsibility of human to save and control these resources is also important. This research work focuses on a Smart Metering data for distributing the electricity smartly and efficiently to the consumers. The main drawback of previously used traditional meters is that they do not provide information to the consumers, which is accomplished with the help of Smart Meter. A Smart Meter helps consumer to know the information of consumption of electricity for appliances in their respective houses.
    [Show full text]
  • RX210 Single-Phase Two-Wire Electricity Power Meter
    APPLICATION NOTE R01AN1212EU0101 RX210 Rev.1.01 Single-phase Two-wire Electricity Power Meter Dec 03, 2012 Introduction This document provides a guide to designing Electricity Meters with Renesas 32-Bit RX210 microcontrollers. Typical electricity meter designs today use at least one microcontroller an external analog front end (AFE). The role of the AFE is to provide accurate voltage and current measurement data to the metrology computation engine implemented some times in the AFE itself or in the microcontroller firmware. Depending on the accuracy requirements mandated by industry standards and local authorities, additional signal processing tasks such as: phase and temperature compensation, noise reduction through digital filtering and harmonic analysis may be required. Beyond the basic metrology functions smart electricity meters have to be able to calculate and track energy consumption profiles and support automatic meter reading (AMR) through various communication infrastructure such as wireless or power line (PLC) etc. All these additional functions require more computational resources often provided by additional microcontrollers (MCUs) or digital program processors (DSPs). Depending on the features and performance of the MCU’s a high level of integration that can be achieved at greatly reduced cost by reducing the number of components used, design cycle and system complexity. Integrating the AFE function with the computation engine can furthermore reduce the total system cost. Targeting smart meter applications with high levels of integration this application note will explore the capabilities of the Renesas RX210 Group. Smart electricity meters are becoming the standard in many developed countries around the world due to the new demands in accurate energy consumption monitoring, reporting and billing.
    [Show full text]
  • A Low Cost Watt-Hour Energy Meter Based on the ADE7757 (AN-679)
    AN-679 APPLICATION NOTE One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106 • Tel: 781/329-4700•Fax: 781/326-8703 •www.analog.com A Low Cost Watt-Hour Energy Meter Based on the ADE7757 by Stephen T. English INTRODUCTION The ADE7757 board design greatly exceeds this basic This application note describes a high accuracy, low specifi cation for many of the accuracy requirements, cost, single-phase power meter based on the ADE7757. e.g., accuracy at unity power factor and at a low power The meter is designed for use in single-phase, 2-wire factor (PF = ±0.5). In addition, the dynamic range per- distribution systems. The design can be adapted to suit formance of the meter has been extended to 400. The specifi c regional requirements, e.g., in the U.S., power is IEC 61036 standard specifi es accuracy over a range of usually distributed for residential customers as single- 5% Ib to IMAX (see Table I). Typical values for IMAX are phase, 3-wire. 400% to 600% of Ib. The ADE7757 is a low cost, single-chip solution for Table I. Accuracy Requirements electrical energy measurement. The ADE7757 is a highly integrated system comprised of two ADCs, a reference Percentage Error Limits3 circuit, and a fi xed DSP function for the calculation of Current Value1 PF2 Class 1 Class 2 real power. A highly stable oscillator is integrated into 0.05 lb < I < 0.1 lb 1 ±1.5% ±2.5% the design to provide the necessary clock for the IC. The 0.1 lb < I < IMAX 1 ±1.0% ±2.0% ADE7757 includes direct drive capability for electrome- 0.1 lb < I < 0.2 lb 0.5 Lag ±1.5% ±2.5% chanical counters and a high frequency pulse output for 0.8 Lead ±1.5% both calibration and system communication.
    [Show full text]
  • Electrical Multimeter Instruction Sheet Safety Information a Warning Statement Identifies Hazardous Conditions and Actions That Could Cause Bodily Harm Or Death
    Model 113 English Instruction Sheet Page 1 ® 113 Electrical Multimeter Instruction Sheet Safety Information A Warning statement identifies hazardous conditions and actions that could cause bodily harm or death. A Caution statement identifies conditions and actions that could damage the Meter or the equipment under test. To avoid possible electric shock or personal injury, follow these guidelines: • Use the Meter only as specified in this instruction sheet or the protection provided by the Meter might be impaired. • Do not use the Meter or test leads if they appear damaged, or if the Meter is not operating properly. • Always use proper terminals, switch position, and range for measurements. • Verify the Meter's operation by measuring a known voltage. If in doubt, have the Meter serviced. • Do not apply more than the rated voltage, as marked on Meter, between terminals or between any terminal and earth ground. • Use caution with voltages above 30 V ac rms, 42 V ac peak, or 60 V dc. These voltages pose a shock hazard. • Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance. PN 3083192 December 2007 ©2007 Fluke Corporation. All rights reserved. Specifications subject to change without notice. Printed in China Model 113 English Instruction Sheet Page 2 • Do not use the Meter around explosive gas, vapor or in wet environments. • When using test leads or probes, keep your fingers behind the finger guards. • Only use test leads that have the same voltage, category, and amperage ratings as the meter and that have been approved by a safety agency.
    [Show full text]
  • Electricity Meter
    PRODUCTION BASE http://en.chintim.com/ August 2019 Electricity Meter Chint Instrument & Meter ◎ Zhejiang Chint Instrument & Meter Co., Ltd, founded in 1998, which is one of the core subsidiaries of CHINT Group, a national high-tech enterprise, and the National Torch Program key high-tech enterprise. ◎ Chint Meter provides reliable products and qualified service for customers of electricity, gas, new energy, rail transmit, communication, petrochemical architecture industry, etc. Admitting by State Grid, South Grid, Petro China, Sinopec, China Telecom, China gas, China Res Gas. ◎ Independent R&D: more than 380 items. ◎ Passed MID, KEMA, NMI, STS and other more than 10 international authority certifications. ◎ A qualified supplier of France Utility EDF. ◎ Products are sold well in more than 70 countries and regions. Leading Energy Measurement Equipment and System Solution Provider Products and Solutions Advantages Smart Electricity Meter Possessing the group "generate, storage, transmit, transfer, delivery, use" electric Smart Gas Meter equipment whole industry chain advantages. Acquiring the world second, China first R46 Power Supervision and Control Meter certification issued by International Organization of Legal Metrology (OIML). Smart Water Meter In collaboration with CHINT Electric, Chint Instrument & Meter takes the lead in developing the metering and monitoring Smart Data Concentrator functions for the smart circuit breaker. Energy Measurement System Solution IEC 1906 Award. Power Distribution Monitoring System Solution Steel gas
    [Show full text]
  • Billing & Revenue Metering
    BILLING & REVENUE METERING SMART SYSTEMS Time of Use (TOU) Billing Systems Value Proposition Solution Advantages Energy distribution and tenant billing SATEC Automatic Meter Reading (AMR) Additional profit center allows up to 40% markup and fast return on system includes various energy meters, Space and cost savings investment (ROI) with an effective techno- bi-directional communication and Automatic Operation financial solution. comprehensive software for remote Energy Saving management, online control and billing. Complete outsourced service Shopping Residential Commercial Data Centers Projects Buildings Centers & Malls Hi-Tec & Public Universities & Industrial Hospitals Buildings Student Dorms Facilities Independent Hotels & Renewable Military Power Holiday Energy Plants Facilities Producers Resorts (IPPs) 2 The Experts in Energy Billing SATEC was established in 1987 and recently after introduced a Communication infrastructure for automatic continuous multi-function digital electricity meter, which was a new concept collection of data through various options – wired (RS-232, RS- at that time. Today the company is a world leader in the field of 485, Ethernet) or wireless (Cellular or license-free RF) energy management, power quality monitoring and substation The information is sent over the Internet to a secured central automation with offices in the USA, Israel, Spain, Russia, India, server running ExpertPower™ software on the cloud. This Singapore, Japan, China and Australia. In addition, SATEC allows high availability and simultaneous access to all relevant solutions are promoted in over 60 countries via over 100 business personnel, based on personal access permissions. partners. Dedicated project managers, together with SATEC's technical In 2006 SATEC established the Billing department, which is support team, carry out system setup, tenant definition and dedicated to energy distribution and billing.
    [Show full text]
  • Digital Electricity Meter Eletronic Polyphase Meters LD / LM / LK / ML / LGRW Series Digital Electricity Meter
    www.lsis.biz Digital Electricity Meter Eletronic Polyphase Meters LD / LM / LK / ML / LGRW Series Digital Electricity Meter Eletronic Polyphase Meters Digital Electricity Meter (LD / LM Series) LS Digital meters increase space application by minimizing size, has various types and reliability by easy maintenance. �1phase 2wiring, 3phase 3wiring, 3phase 4wiring, Flush mounting Digital Electricity Meter (LK Series) As its reputation for advanced technology LSIS replaces the generation of electronic meters. �High performance with multifunction �Operating power supply �Convenient operation South-East Asia Heters (ML Series) �Global target specification �10(100)A, BS 5685 Eletronic Polyphase Meters (LGRW Series) The best technique of LS realize the substitution of electronic meter generation. �Accurate setting �Modem and communication interface �Various external output pulse �Demand controller application, saving electric charge LD/LM Series Digital Electricity Meter LSIS Digital watt hour meter The best technique of LS realize the substitution of electronic meter generation. <LM Series> <LD Series> LS Digital W-meter increases space application by minimizing size, has various types and reliability by easy maintenance. Digital Electricity Meter LD/LM Series LD series 6 LM series 8 Application 10 Contents LD Series Ratings / Dimensions 12 LD Series (CT/PT operated meter) Ratings / Dimensions 19 LM Series Ratings / Dimensions 23 MWT Series Ratings / Dimensions 24 Ratings and specification 25 Diagram 28 1P2W Up/Down type 1P2WLeft/Right type 3P4W Up/Down type 3P4W Left/Right type Digital Electricity Meter LSIS Digital watt hour meter The best technique of LSIS generates innovative meters. <LM Series> <LD Series> High reliable CPU Large LCD The CPU of watt hour meter is same as humans brain.
    [Show full text]
  • Energylens: Combining Smartphones with Electricity Meter for Accurate Activity Detection and User Annotation
    EnergyLens: Combining Smartphones with Electricity Meter for Accurate Activity Detection and User Annotation Manaswi Sahay, Shailja Thakury, Amarjeet Singhy, Yuvraj Agarwalz yIndraprastha Institute of Information Technology, Delhi zCarnegie Mellon University y{manaswis, shailja1275, amarjeet}@iiitd.ac.in, [email protected] ABSTRACT Categories and Subject Descriptors Inferring human activity is of interest for various ubiquitous C.3 [Special-Purpose and Application-Based Systems]: computing applications, particularly if it can be done using Real-time and embedded systems ambient information that can be collected non intrusively. In this paper, we explore human activity inference, in the context of energy consumption within a home, where we de- Keywords fine an \activity" as the usage of an electrical appliance, its Smart Meters; Smartphones; Energy Disaggregation; Activ- usage duration and its location. We also explore the dimen- ity Detection; User Association sion of identifying the occupant who performed the activity. Our goal is to answer questions such as \Who is watching TV in the Dining Room and during what times?". This 1. INTRODUCTION Smartphones, over the past few years, have seen unprece- information is particularly important for scenarios such as dented growth across the world. In many markets, such as the apportionment of energy use to individuals in shared the US, they have long since surpassed sales of traditional settings for better understanding of occupant's energy con- feature phones. While many factors have contributed to sumption behavioral patterns. Unfortunately, accurate ac- their popularity, the most important perhaps is the increase tivity inference in realistic settings is challenging, especially in device capabilities as supported by higher end components when considering ease of deployment.
    [Show full text]
  • Solaredge Electricity Meter Installation Guide
    SolarEdge SolarEdge Electricity Meter Installation Guide For North America Version 1.0 Disclaimers Disclaimers Important Notice Copyright © SolarEdge Inc. All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photographic, magnetic or otherwise, without the prior written permission of SolarEdge Inc. The material furnished in this document is believed to be accurate and reliable. However, SolarEdge assumes no responsibility for the use of this material. SolarEdge reserves the right to make changes to the material at any time and without notice. You may refer to the SolarEdge web site (http://www.solaredge.us) for the most updated version. All company and brand products and service names are trademarks or registered trademarks of their respective holders. Patent marking notice: see http://www.solaredge.us/groups/patent The general terms and conditions of delivery of SolarEdge shall apply. The content of these documents is continually reviewed and amended, where necessary. However, discrepancies cannot be excluded. No guarantee is made for the completeness of these documents. The images contained in this document are for illustrative purposes only and may vary depending on product models. FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    [Show full text]
  • Cost-Effective Smart Metering System for the Power Consumption Analysis of Household
    (IJACSA) International Journal of Advanced Computer Science and Applications, Vol. 5, No. 8, 2014 Cost-Effective Smart Metering System for the Power Consumption Analysis of Household Michal Kovalčík, Peter Feciľak, František Jakab Jozef Dudiak, Michal Kolcun Department of Computers and Informatics Department of Electric Power Engineering Technical University of Kosice Technical University of Kosice Kosice, Slovakia Kosice, Slovakia Abstract—This paper deals with design, calibration, integration circuits are now used in washing machines, air experimental implementation and validation of cost-effective conditioners, automobiles or digital cameras. smart metering system. Goal was to analyse power consumption of the household with the immediate availability of the measured The first part of the paper is about theoretical aspects of information utilizing modern networked and mobile measuring the electricity by means of the newest intelligent technologies. Research paper outlines essential principles of the meters. The second part of the article is about real application measurement process, document theoretical and practical aspects of constructed device that is installed in household for testing which are important for the construction of such smart meter and measuring the behavior of electricity consumption. and finally, results from the experimental implementation has been evaluated and validated. II. MEASUREMENT OF ELECTRICAL PARAMETERS Measurement is the process of getting the knowledge of Keywords— electrical voltage; electrical current; active power; outside world, where we try to get the desired values. Success measurement principles; intelligent metering system; smart meter; is defined mainly with measuring accessibility, environment Atmel and the precision of measuring devices. The role of electrical I. INTRODUCTION measurement is to find out the values of defined electrical quantities as precisely as possible.
    [Show full text]
  • A3 ALPHA Meter Technical Manual Contents
    A3 ALPHA® Meter Electronic Meter for Electric Energy Measurement Technical Manual TM42-2190B US English (en) © 2003 by Elster Electricity, LLC. All rights are reserved. No part of this software or documentation may be reproduced, transmitted, processed or recorded by any means or form, electronic, mechanical, photographic or otherwise, translated to another language, or be released to any third party without the express written consent of Elster Electricity, LLC. Printed in the United States of America. Notice The information contained in this software and documentation is subject to change without notice. Product specifications cited are those in effect at time of publication. Elster Electricity, LLC shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Elster Electricity, LLC expressly disclaims all responsibility and liability for the installation, use, performance, maintenance and support of third party products. Customers are advised to make their own independent evaluation of such products. ALPHA and ALPHA Plus are registered trademarks and Metercat and AlphaPlus are trademarks of Elster Electricity, LLC. Other product and company names mentioned herein may be the trademarks and/or registered trademarks of their respective owners. A3 ALPHA Meter Technical Manual Contents TM42-2190B A3 ALPHA Meter Technical Manual Contents FCC Compliance . vii Class B Devices. vii Class A Devices . vii Telephone Regulatory Information . viii Disclaimer of Warranties and Limitation of Liability. .ix Safety Information. x Revisions to This Document . .xi 1. Introduction . 1-1 The A3 ALPHA Meter . 1-2 Standards Compliance. 1-3 Benefits . 1-4 Reliability.
    [Show full text]