Fly Press Tools Are Coming ABANA 2016 Edition

Total Page:16

File Type:pdf, Size:1020Kb

Fly Press Tools Are Coming ABANA 2016 Edition Modern Tools for the Modern Blacksmith Kevlar Gloves Stanley Tape Measures Brass Brushes Tom Tongs Stainless Steel Rulers Candle Cups Smithin Magicians Transfer Punch Sets Fire Place Shovel Blanks Open/Close Face Swages Letter/Number Punch Sets Monkey Tool Sets Swedish Style Hammers Flap Disk Aviation Snips German Style Hammers Cutoff Wheels Silver Marking Pencils French Style Hammers Sanding/Grinding Disk Lamp Parts NC Propane Forges Chisels Brass Sheet Anvils Vise Grips Safety Supplies Gilder’sPaste Paint Block Brushes Blacksmith Videos/DVD’s Center Finding Rules Handle Brushes ...and much more! www.blacksmithsupply.com P.O. Box 3766 Chester,VA23836 1-855-530-0290 Check out our line of Traditional European Style Anvils at WWW.EUROANVILS.NET Fly Press Tools Are Coming ABANA 2016 Edition Prices are subject to change with no notice. Blacksmith Supply LLC is not responsible for printing errors or omissions. We make every effort to stock items, but from time to time backorders will occur. We reserve the right to limit quantities. Limitation of Liability: Blacksmith Supply LLC does not accept liability beyond the remedies set forth herein, including but not limited to any liability for product not being available for use. Lost profits, loss of business, except as expressly provided herein, Blacksmith Supply LLC will not be liable for any consequential, special, indirect or punitive damages, even if advised of the possibility of such damages, or for any claim by any third party. You agree that for any liability related to the purchase of the product, Blacksmith Supply LLC is not liable or responsible for any amount of damages above the amount invoiced for the applicable product. Notwithstanding anything in this agreement to the contrary, the remedies set forth in this agreement shall apply even if such remedies fail their essential purpose. Return Policies / Exchanges: You must contact us directly before you attempt to return Product to obtain a Return Material Authorization Number for you to include with your return. You must return Product to us in its original or equivalent packaging. You are responsible for risk of loss, shipping and handling fees for returning or exchanging Product. Additional fees may apply. If you fail to follow the return or exchange instructions and policies provided by Blacksmith Supply LLC, Blacksmith Supply LLC is not responsible whatsoever for Product that is lost, damaged, modified or otherwise processed for disposal or resale. At Blacksmith Supply LLC’s discretion, credit for partial returns may be less than invoice or individual component prices due to bundled or promotional pricing. Warranties: Blacksmith Supply LLC’s responsibility for malfunctions and defects in hardware is limited to repair and replacement as set forth in this warranty statement. All express and implied warranties for the Product, including but not limited to any implied warranties and conditions of merchantability and fitness for a particular purpose are limited in time to the term of the limited warranty period of 90 days. Tongs We offer a good selction of quality tongs Tom Tongs V Jaw V-Jaw Tongs with 12" Reins. 8650 steel, V notches in front and side of the jaws, all tongs have balls on the end of the handles. Item Size Description Price TC-200 3/16" V-Jaw $35.00 TC-201 1/4" V-Jaw $35.00 TC-202 5/16" V-Jaw $35.00 TC-203 3/8" V-Jaw $35.00 TC-204 1/2" V-Jaw $40.00 TC-205 5/8" V-Jaw $40.00 TC-206 3/4" V-Jaw $40.00 TC-207 1 V-Jaw $40.00 Tom Tongs Bolt Tongs Bolt Tongs SM-MED8650 steel, V notches in front and sides of the jaws, flat handles with balls on the end for comfort of user Item Size Description Price TC-212 3/16" BOLT $35.00 TC-213 1/4" BOLT $35.00 TC-214 5/16" BOLT $35.00 TC-215 3/8 BOLT $35.00 TC-216 1/2" BOLT $40.00 TC-217 5/8 BOLT $40.00 TC-218 3/4" BOLT $40.00 TC-219 7/8 BOLT $40.00 TC-220 1" BOLT $40.00 Tom Tongs Bolt Tongs Large 14" REINS Bolt Tongs LARGE8650 steel, V notches in front and sides of the jaws, flat handles with balls on the end for comfort of user. Sizes from 3/4" To 2 1/2". Item Size Description Price TC-224-14 3/4" BOLT14"REINS $45.00 TC-225-14 7/8" BOLT14"REINS $45.00 TC-226-14 1" BOLT14"REINS $45.00 TC-227-14 11/4" BOLT14"REINS $45.00 TC-228-14 13/8" BOLT14"REINS $45.00 TC-229-14 11/2" BOLT14"REINS $45.00 TC-230-14 13/4" BOLT14"REINS $45.00 TC-231-14 2" BOLT14"REINS $45.00 TC-232-14 21/4" BOLT14"REINS $45.00 TC-233-14 21/2" BOLT14"REINS $45.00 1 Tongs Tom Tongs Box Jaw Tongs 1/4" 1/4" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. Sizes through 1 1/4" have 12" reins, 1 1/2" to 2" have 14" reins. 1/4" x eight different sizes available Item Size Description Price TC-252-12 1/4x1/2" BOXJAW $40.00 TC-253-12 1/4x3/4" BOXJAW $40.00 TC-254-12 1/4x1" BOXJAW $40.00 TC-255-12 1/4x11/4" BOXJAW $40.00 TC-256-14 1/4x11/2" BOXJAW $40.00 TC-257-14 1/4x 13/8" BOXJAW $40.00 TC-259-14 1/4x13/4" BOXJAW $40.00 TC-260-14 1/4x2" BOXJAW $40.00 Tom Tongs Box Jaw Tongs 5/16" 5/16" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. Sizes 3/4" and 1.0" have 12" reins, 1 1/2" through 2 1/2" have 14" reins. 5/16" x six different sizes available Item Size Description Price TC-265 5/16x3/4" BoxJaws $40.00 TC-266 5/16 x 1" Box Jaws $40.00 TC-267 5/16x11/2" BoxJaws $40.00 TC-268 5/16 x 2" Box Jaws $40.00 TC-269 5/16x21/4" BoxJaws $40.00 TC-270 5/16x21/2" BoxJaws $40.00 Tom Tongs Box Jaw Tongs 3/8" 3/8" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 3/8" Box Jaw Tongs have 14" reins 3/8" x in three different sizes are available Item Size Description Price TC-275 3/8x1" BoxJaw $40.00 TC-276 3/8x11/4" BoxJaw $40.00 TC-277 3/8x11/2" BoxJaw $40.00 2 Tongs Tom Tongs Box Jaw Tongs 1/2" 1/2" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 1/2" x four different sizes available. 1/2" Box Jaw Tongs have 14" reins Item Size Description Price TC-282 1/2x1" BoxJaw $40.00 TC-283 1/2x11/4" BoxJaw $40.00 TC-284 1/2x11/2" BoxJaw $40.00 TC-285 1/2X2" BoxJaw $40.00 Tom Tongs Box Jaw Tongs 5/8" 5/8" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 5/8" x three different sizes available. 5/8" Box Jaw Tongs have 14" reins Item Size Description Price TC-290 5/8x1" BoxJaw $40.00 TC-291 5/8x11/4" BoxJaw $40.00 TC-292 5/8x11/2" BoxJaw $40.00 Tom Tongs Scroll Tongs 8650 steel, round handles with ball ends, 4 inch small scrolling jaws are bent at a 90 degree angle so you can work parallel with your piece. Large Scroll Tongs have 4 inch jaws that will not bend or warp under heavy use. Five types/sizes available. Item Size Description Price TC-306 LongNose SCROLL $40.00 TC-307 ShortNose 16InchLength $35.00 TC-308 ShortNose 8inchLength $35.00 TC-309 90DegreeNose 8inchLength $40.00 Tom Tongs Scroll Pliers Scroll PliersMade from 8650 steel, the handles have a rubber coating for better grip. These 3 inch scrolling jaws will not bend or warp under heavy use Item Size Description Price TC-310 3inchnose ScrollPliers $35.00 3 Tongs Tom Tongs Fire Tongs 8650 steel, handles are flat with ball ends, jaws are tapered so you can easily slide the tongs under the stock while in the fire, designed for use with flat stock. Good Farrier tongs! Five sizes available. Item Size Description Price TC-316 1/4" Fire Tongs $35.00 TC-317 5/16" Fire Tongs $35.00 TC-318 3/8" Fire Tongs $35.00 TC-319 1/2" Fire Tongs $35.00 TC-320 5/8" Fire Tongs $35.00 Tom Tongs Wolf Jaw 8650 steel, round handles with ball ends, V notch in the front of the jaws while the sides of the jaws have different spaces for holding various sizes of stock. Two sizes available. Item Size Description Price TC-326-15 Large WolfJaw $40.00 TC-327-12 Small WolfJaw $35.00 Tom Tongs Double Pickup Double Pick Up Tongs 8650 steel, round handles with balls on the ends, Jaw has two different openings to allow the user to pick up and work on various sizes of stock. Item Size Description Price TC-331-14 14inch Double $40.00 Tom Tongs Triple Pickup Triple Pick Up Tongs 8650 steel, round handles with balls on the ends, Jaw has three different openings to allow the user to pick up and work on various sizes of stock.
Recommended publications
  • Hot Iron News the VOICE of the NORTHWEST BLACKSMITH ASSOCIATION Fourth Quarter 2013
    Hot Iron News THE VOICE OF THE NORTHWEST BLACKSMITH ASSOCIATION Fourth Quarter 2013 Hot Iron News 2013/4 Northwest Blacksmith Association “To promote and preserve the Art and Craft of Blacksmithing while building friendship and good will.” Board of Directors Standing Committees President Finance & Budget: Chair - Darryl Nelson Bill Apple Member Services: Chair - Andrea Lisch, PO Box 244 Burley, WA 98322 Communications: Chair - Unfi lled, Amy Mook 360-876-8405 [email protected] Events & Programs: Chair - Dean Mook, Jay McGowan, Tom Ferry Vice President Subcommittees Bruce Crittenden Spring Conference 2014: Longview, WA - Bruce Crittenden & Brent 1041 Andy Cooper Road Christiansen Port Ludlow, WA 98365 Western States Conference 2013 Mt. Hood: Chair - Darryl Nelson & 360-437-2922 [email protected] Jay McGowan Secretary Archives: Chair - Jack Slack, Jeff Wilson, Andrea Lisch Brent Christiansen Assets & Inventories: Chair - Dean Mook, Darryl Nelson 30338 SE Bluff Rd Auctions: Co-Chairs - Harold & Beth Heia Gresham, OR 97080 Audio & Visual: Chair - Mark Manley 503-663-3919 [email protected] Audit: Entire Board Treasurer Board Training: Chair - unfi lled Darryl Nelson Donations (501(c)3): Chair - Andrea Lisch 36914 Meridian East Elections: Chair - Jim Garrett Eatonville, WA 98328 Grants, Education & Workshops: Chair - Bruce Crittenden, Jay 360-832-6280 fi [email protected] McGowan Director Insurance: Chair - Bruce Crittenden Tom Ferry Library: Chair - Marie Churney, Andrea Lisch 16005 SE 322nd St. Manuals: Chair - Andrea Lisch Auburn, WA 98092 Safety: Chair - Tom Ferry 253-939-4468 [email protected] Hot Iron News and Website Editor: Amy Mook Director Quick Reference for NWBA Members Andrea Lisch 9239 8th Ave SW Submit articles, photos, how-to’s to HIN: Seattle, WA 98106 [email protected] 206-706-1814 [email protected] NWBA Website: www.blacksmith.org For NWBA correspondence or membership, or to change your Director address (must be in writing) send to: Jay McGowan 607 Ronald Ave.
    [Show full text]
  • The Anvil's Chorus
    The Anvil’s Chorus November 2001 Page 2 The Anvil’s Chorus Executive Committee ( Board of Directors): President: Bill Banker – 607-276-6956, PO Box 174 Almond, NY 14804, e-mail: [email protected] Vice President: Verner Hornquist – 716–433-7570, 6062 Shaffer Rd. Lockport, NY 14094 Treasurer: Dick Rightmyer – 585-293-3299, 251 Leibeck Rd. Churchville, NY 14428, e-mail: [email protected] Secretary: Harold Hopkinson – 315-682-6314, 4590 South Brookhill Dr. Malius, NY 13104, email: [email protected] Forgemasters: Adirondack: John Scarlett – 315-324-5635 Niagara: Bob Corneck – 716-741-4311, e-mail: [email protected] Genesee: Dick Rightmyer – 585-293-3299, e-mail: [email protected] Mohawk: Dale Barrows – 607-849-3198, e-mail: [email protected] Southern Tier: John Fee – 607-523-6677, e-mail: [email protected] Newsletter editor: Al Butlak – 716-894-7185, 1351 Walden Ave. Buffalo, NY 14211, e-mail: [email protected] Scholarship Chairperson: Jim Robarr – 716-433-8564, e-mail: [email protected] Nominations Chairperson- Your name could be here, volunteer! The Cover: A group of NYSDB members who were present at the all state meeting at Jeff Jubenville's shop in Kent, NY that was a two-day event for the entire membership. A write up on the meeting will appear elsewhere in this issue. The Anvil’s Chorus is composed and written by the editor except as indicated. Material may be reprinted except as noted as long as proper credit is given to NYSDB. It’s officers, demonstrator's writers, editor, and members specifically dis- claim any responsibility or liability for any damages or injuries as a result of the use of any information published in the Anvil’s Chorus.
    [Show full text]
  • Handbook of Practical Smithing and Forging
    WAR SERVICE. LIBRARY THIS-BOOK-IS PROVIDED-BY THE-PEOPLE OF*THE feU. UNITED-STATES THROUGH-THE AMERICAN LIBRARY m\ ASSOCIATION FOR THE-USE-OF THE-SOLDIERS AND* SAILORS 'Si '^RA^' sSl" ,; ^H$: 3 v T ~ 7" HANDBOOK OF PRACTICAL SMITHING AND FORGING HANDBOOK OF PRACTICAL SMITHING AND FORGING ENGINEERS, & GENERAL SMITHS' WORK BY THOMAS MOORE FOREMAN AND PRAC11CAL SM11H 401 ILLUSTRATIONS NEW IMPRESSION JLonftm: & F. N. SPON, Ltd., 57 HAYMARKET JfkUi gorfe: SPON & CHAMBERLAIN, 123 LlbERTY STREET I9I4 Attention Patron: This volume is too fragile for any future repair. Please handle with great care. UNIVERSITY OF MICHIGAN LIBRARY-CONSERVATION & BOOK REPAIR CONTENTS. -o- PAGE PREFACE ....... 7 CHAPTER I. INTRODUCTORY ...... II. FORGES OR HEARTHS ..... 4 III. HAMMERS, FORGING MACHINES AND PRESSES IV. IRON AND STEEL .-..., V. TESTING ....... 53 VI. GENERAL FORGING AND SMITHING: SUMMARY AND EXPLANATION OF TECHNICAL TERMS, EXPRESSIONS, AND PHRASES 6/ TABLES ....... 228 INDEX ....... 245 PREFACE. The absence of a useful and practical treatise on the art ol Smithing and Forging was a source of great disappointment to the Author in his early days, and often since then, he has wondered why no one ventures to devote himself to the subject through the great medium of the press, with a view to helping and interesting their fellow smiths. The Author, after a life experience in the trade as a Smith, Forger, Stamper and Fore- man, seeks in the following pages to submit some sound and practical suggestions on the subject, which he hopes will be interesting and instructive to those in the " trade." The tables at the end have been compiled with a view to usefulness, and no doubt they will often prove a convenience to the reader.
    [Show full text]
  • Scaba July 2016-26
    Saltfork Craftsmen Artist-Blacksmith Association July 2016 The 2016 Saltfork Craftsmen Annual Conference is coming up fast and the Conference Toolbox made by Don Garner is ready to be filled with donated items. Please consider donating an item to support this annual tradition. See Page 14… Saltfork Craftsmen Editors notes… Artist-Blacksmith Association At the last Board of Directors meeting, I was one of the Officers and Directors nominees elected to the Board. I would like to take this space to thank all of you who took time to vote in President: Byron Doner 405-650-7520 general. 6520 Alameda, Norman OK 73026 [email protected] I would also like to thank those of you who cast one of your votes for me specifically. I consider it an honor to Vice-President/Conference Chair: be on the Board and will do my best to help guide the Doug Redden 918-230-2960 2050 E. 410 Rd. club in a positive way. Oologah, Ok. 74053 [email protected] If you have never attended a Board of Directors meeting (which are always open to any member to Director/Workshop Coordinator: attend), I can tell you that your Directors and Mandell Greteman 580-515-1292 409 East Broadway Volunteers, both past and present, work very hard to Foss, Okla. 73647 make the best decisions they can to benefit the [email protected] membership. Director/Swage Blocks: Attending some past meetings as the newsletter editor, I Bill Kendall 918-691-2173 1756 E. 59th St have watched these folks churn through a multitude of Tulsa Ok.
    [Show full text]
  • NOTES for BEGINNING BLACKSMITHS the Following Are Random Thoughts and Mostly Opinions
    NOTES FOR BEGINNING BLACKSMITHS The following are random thoughts and mostly opinions. FORGES Both coal and propane have a place in the smithy. Don’t buy a gas forge. I’ve never seen a commercial gas forge as efficient as what can be built cheaper. Forge lining materials are called refractory materials. The closest place I know of to buy refractor items is Harbison Walker, they have a store in Knoxville. For years I used ceramic blanket coated with Satanite and some reflector coating like ITC 100. A couple of years ago I built a forge using Kast-O-lite 30 and Kast-O-lite 26. My opinion now is the castable is the way to go for what I do. Shop the price, most economical for me is to just pick up in Knoxville when I have another reason to be in the area during business hours. If a few members want to build a forge the materials could be picked up in one trip. I like/ use a force aspirated forge. Atmospheric forges can be nice but are finicky and don’t offer the total control of a blown unit. Some talk about how little fuel their atmospheric forge use and mention the low psi reading on the gauge. This often leads into a meaningless discussion.The physics of pressure and orifice size are often not considered. In my experience it takes X amount of fuel to heat Y volume to Z temperature, insulation and other factors being the same the fastest most controllable way to achieve Z is with a blower set up.
    [Show full text]
  • International Journal of Advance Research in Engineering, Science
    Impact Factor (SJIF): 4.542 International Journal of Advance Research in Engineering, Science & Technology e-ISSN: 2393-9877, p-ISSN: 2394-2444 Volume 4, Issue 4, April-2017 Fabrication of power hammer for forging and embossing operation Mohammad Mohsin Siddiqui. S1,Pathan Mashirakhanam S2,Jaka Siraj Ahmed3 Shaikh Meraj K4 1Mechanical Engineering, SEC(Matar) 2Mechanical Engineering, SEC(Matar) 3Mechanical Engineering, SEC(Matar) 4Mechanical Engineering, SEC(Matar) Abstract — Now a day’s competition is increasing in the market with the increase of demand of the products and similarly large number of small scale industries. The present invention relates to the improvement of the power hammer of the type having the impact member adapted to the rapidly reciprocating member by a rotating source of power so as to impart sequential shocks against work to which the appliance is applied with the help of the eccentric mechanism. More particularly this invention relates to the power hammer, used for forging effect, embossing effect, blanking effect, piercing effect, etc. as well as decreasing its cost and making it multi operational. Keywords — Power hammer, embossing, punching, blanking, forging, molding, blacksmith, multi operational, economic, leaf spring, eccentric mechanism. I. INTRODUCTION The forging is the very old technique of manufacturing in which conventionally metal rod is heated and then hammered by black smith, but nowadays with improvement in technology that manual operation is replaced by power hammer which is normally electric motor. A typical power hammer consists of a frame, an anvil, and a reciprocating ram holding a hammer head or die. The work piece is placed on the lower anvil or die and the head or upper die strikes the work piece.
    [Show full text]
  • September 2019
    Saltfork Craftsmen Artist-Blacksmith Association September 2019 Your? Project Here... (See Page 15 for Details of the Saltfork Gate Project) The 2019 Annual Saltfork Conference is Next Month! Conference October 19th and 20th See page 16 for Conference flyer and registration form. The best way to register is online through the website. Be sure to register as soon as possible! Find an extra bonus in your welcome packet if paid registration is received on or before Monday October 14th. Saltfork Craftsmen Artist-Blacksmith Association Conference Set Up Work Officers and Directors Day! President/Workshop Coordinator: Mandell Greteman 580-515-1292 409 East Broadway There is a Pre-Conference set up work Foss, Okla. 73647 [email protected] day scheduled for October 12th at the Vice-President/Conference Chair: Conference site in Sulphur (This is the JJ McGill 580-369-1042 Saturday one week before the Confer- 5399 Pete Nelson Rd. Davis, OK 73030 [email protected] ence.) Director: Byron Doner 405-650-7520 If you are interested in helping set up 6520 Alameda Norman OK 73026 [email protected] for the Conference, please attend that day. Director: Ricky Vardell 580-512-8006 P.O. Box 461 Set up will include placing the bleach- Temple, OK 73568 [email protected] ers, installing the audio-visual equip- Director: ment infrastructure, moving various Don Garner 580-302-1845 23713 E 860 Rd items around, etc. None of it is hard Thomas, OK 73669 Call or Text work if enough people come to help. Director: Eric Jergensen 405-414-8848 625 NW 18th There will be a lot of camaraderie Oklahoma City, OK 73103 [email protected] among those elite volunteers who Director: choose to attend.
    [Show full text]
  • Download Newsletter
    THE HOT IRON SPARKLE NEWSLETTER OF THE NORTH CAROLINA ARTIST-BLACKSMITH’S ASSOCIATION OF NORTH AMERICA Volume 33 Number 3 Third Quarter 2014 Under the big tent in Harrington, Delware at the bi-annual ABANA Conference Inside This Issue A Message from our President 2 Triangle Area Blacksmiths 11 From the Shop of Samuel Yellin 32 NC ABANA Reports 3 Event Reports Ten Tips for Beginners 38 New Members 4 Observations at ABANA 2014 12 Recycling Beeswax 39 Dixie Classic Fair 2014 5 SOFA 2014 14 Hydraulic Forging Press book 40 NC State Fair 2014 6 2nd Q Meeting at Fairgrounds 16 Quarter Corner Need representative to the SBA 8 Featured Articles Steel of the Quarter: S7 41 Regional Reports Photo Gallery 18 Tool of the Quarter: Mandrel 42 Wilkes Teaching Forge 9 Membership List 22 Anvil Surfing Pic of the Quarter 44 Southern Foothills Blacksmiths 9 SBA Project Details 28 Triad Area Blacksmiths 10 Vertical Tanks for Cleaning 31 THE HOT IRON SPARKLE Volume 33 Number 3 NC ABANA Officers A Message from our President PRESIDENT Greetings All, 1st SEP 2014 Lyle Wheeler Millers Creek, NC 28651 Millers Creek, NC 336-838-2284 Strange times here as the Dog Days have [email protected] gone out but we’ve had some of the hottest weather of the summer in these parts. As VICE-PRESIDENT the calendar turns to September, one can see Garret Dunn October peeking out from the corner and 119 Tanager Ln. that means The Dixie Classic Fair is in sight Chapel Hill, NC 27517-6452 919-469-1317 with the NC State Fair closely following.
    [Show full text]
  • Chronicle Subject Index
    Index A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z A Abbeyhorn Co., 54:3 112–113 Abel, William H., 55:1 8 "Abe L. Adams Art Auger, The" (Price), 45:1 3–4 Abel and Byvanck, 46:1 27 "Abel Sampson: Maine Privateer Turned Planemaker" (Butterworth and Blumenberg), 45:2 35–37 Aber, James (Jim), 45:2 45, 56:4 173 Aber, Jim, 37:4 68 "Abercrombie & Fitch Axe" (Klenman), 52:1 38 Abercrombie & Fitch promotional axe, 52:1 38 Aberdeen, Scotland granite industry, 60:1 16, 60:1 23 immigrants from, 60:1 23 Aberdeen Gin Factory and Machine Shop, 52:1 16 Abishai Way & Co., 43:3 80 "About Our Back Cover." See "Our Back Cover" "About Our Front Cover." See "Our Front Cover" "About the Picture Puzzle," 39:2 31 Abraham, Peter, 49:3 74 Abrams, George screwdriver patent, 45:4 109 Abrasive Products Co., 53:1 32 abrasives for granite, 59:4 130, 59:4 135, 59:4 147 ground flint, 48:1 33 abrasive sheets inventory lists, 39:3 44 abutments for covered bridges, 46:4 114 Académie Royale des Sciences, 58:1 37 Academy of Armory, The, or A Storehouse of Armory and Blazon (Holme), 37:4 61, 52:3 110–111, 53:3 96 "Accident on Lombard Street" (Peale), 61:3 94, 61:3 96 account books blacksmiths, 42:2 47–49, 44:1 26–27, 44:4 122–123, 45:2 52 Blake, Josiah, 55:1 27–30 boat equipment, 43:4 101–102 Burton, Silas, 56:1 11 chairmaking, 44:4 114–115 Columbia (bark), 42:1 22–24, 42:4 101–102 coopers, 42:1 19–21 Danner, Daniel, 47:1 15–26 distribution of raw materials and manufactured goods, 46:2 49–50 Doggett, Simeon, 48:3 40–41
    [Show full text]
  • 8474-Blacksmiths Mar Apr 04
    2004 Feb - Mar Newsletter of the Blacksmith Association of Missouri Participants Needed for the Conference Forging Contest 7 PM - Friday - April 30th Ed: should read in 8 minutes or less The Conference Gallery by Walt Hull At last years conference, for the first time, we had a gallery, and it turned out to be very good. Now it’s time to take it one more step and see if we can’t do even better. BAM is one of the strongest associations in the country and many of you out there are doing really good work. Let’s let the rest of us have a look at it! Here’s how it works: This is not a juried show. If you are a member of BAM you may exhibit your work in the gallery. If you think it’s representative of your best work, it’s good enough. It doesn’t have to be Art with a capital “A.” It can be any kind of blacksmith work, practical or ornamental. It doesn’t have to be “pure” blacksmithing without any modern techniques, but it should be something that not just any welder can do. Your work can be for sale, or not. Work in the gallery may also be in the auction, or not. It’s up to you. Exhibitors are asked to bring a label for their work with the name or description of the piece, the name of the maker, the price of the piece if it is for sale, and any other pertinent or interesting information. We are going to try to display the work a little better than last year.
    [Show full text]
  • Modification and Fabrication of Simple Power Hammer Machine Sagar Makvana1 Nishith Lashkari2 Kalpesh Ram3 1,2,3Department of Mechanical Engineering 1,2,3Dr
    IJSRD - International Journal for Scientific Research & Development| Vol. 6, Issue 02, 2018 | ISSN (online): 2321-0613 Modification and Fabrication of Simple Power Hammer Machine Sagar Makvana1 Nishith Lashkari2 Kalpesh Ram3 1,2,3Department of Mechanical Engineering 1,2,3Dr. Subhash Technical Campus, Junagadh, Gujarat, India Abstract— In the present scenario due to the technologies forging hammer which utilizes pneumatic and/or hydraulic advancement there are lots of demands of the products in the hammer driving systems, yet does not have the energy losses market for production of many components. This invention is associated with pneumatic systems or the complex and relates to fabricate a simple power hammer machine having sophisticated of hydraulic systems. [3]. Howard Terhune, low cost, compact, easy to operate, and having less power et.al, invented this project is simply is an improvement of requirement for a forging operation performed by forging hammers used for industrial purposes. As we aware blacksmiths. More particularly this invention is relates use of that in forging operation the temperature of the metal is so power hammer by small scale industries or workshops having high that manual hammering operation is quite difficult for less force requirement in forging than the other hammer this purpose. So in this project they provided control valves machines available in the market to produce or manufacture which directing the ram up or down by the steam power. [4]. a small parts like knives, medical equipments, sockets, hooks, Invention relates generally to portable motor-operated and clips, dental equipments, rings, manifolds, couplings, etc. manually controlled machine tools or implements, and more Key words: Simple Power Hammer Machine specifically to an improved hammer tool and operating mechanism of the reciprocating, rotary cam actuated type, I.
    [Show full text]
  • Safety Plan and Guide
    CALIFORNIA BLACKSMITH ASSOCIATION SAFETY PLAN AND GUIDE PREPARED JANUARY 2002 Revision 1 1 Forward Safety is paramount and cannot be overly expressed. Two of the main elements of Safety are: • Common sense. • Attitude. Using common sense and having the proper attitude about safety will bring many hours of injury free blacksmithing. There are many potential hazards associated with blacksmithing. The object of this “Safety Plan and Guide” is to minimize these hazards yet allow the Blacksmith to fully enjoy the craft. We have come a long way in the practice of safety. “Practical Blacksmithing” by M.T. Richardson, which was originally published in four volumes in the 1800’s, and still used today as a blacksmith’s guide, never mentioned the word “SAFETY”. Today we consider safety paramount as we have come to realize that workers and their respective skills are not expendable. The requirements of this “SAFETY PLAN and GUIDE’ are considered to be safety as a minimum and therefore the requirements of this document can always be exceeded. 2 Revision Page Rev Paragraphs Change Date Reason Affected ________________________________________________________________________ Basic Jan 2002 Initial Issue All Revision 1 February 2003 Update Safety Plan 2.5.1 2.6 2.8.2 3 CONTENTS TITLE PAGE SIGNATURE SHEET REVISION PAGE FORWARD SECTION 1.0 INTRODUCTION 1.1 Purpose 1.2 Application 1.3 CBA Safety Policy 1.3.1 Responsibility and Authority 1.3.2 Disciplinary Action Program SECTION 2.0 Blacksmith Safety 2.1 Eye Protection 2.1.1 Impact-Type Safety Glasses or Goggles
    [Show full text]