DOCSLIB.ORG

Chapter 31 – Alternating Current

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chapter 31 – Alternating Current Chapter 31 – Alternating Current - Phasors and Alternating Currents - Resistance and Reactance - Magnetic-Field Energy - The L-R-C Series Circuit - Power in Alternating-Current Circuits - Resonance in Alternating-Current Circuits - Transformers 1. Phasors and Alternating Currents Ex. source of ac: coil of wire rotating with constant ω in a magnetic field sinusoidal alternating emf. v = V cos ωt i = I cos ωt v, i = instantaneous potential difference / current. V, I = maximum potential difference / current voltage/current amplitude. ω = 2 πf Phasor Diagrams - Represent sinusoidally varying voltages / currents through the projection of a vector, with length equal to the amplitude, onto a horizontal axis. - Phasor: vector that rotates counterclockwise with constant ω. - Diode (rectifier): device that conducts better in full wave rectifier circuit one direction than in the other. If ideal, R = 0 in one direction and R = ∞ in other. Rectified average current (Irav ): during any whole number of cycles, the total charge that flows is same as if current were constant (Irav ). 2 i = I rav π average value of Іcos ωtІ or Іsin ωtІ Root-Mean Square (rms) values: 2 I V i = (i ) = Vrms = rms av 2 2 i2 = I 2 cos 2 ωt cos 2 ωt = 5.0 ⋅ 1( + cos 2ωt) i2 = 5.0 I 2 + 5.0 I 2 cos (2ωt) 2. Resistance and Reactance Resistor in an ac circuit (instantaneous vR = iR = (IR )cos ωt = VR cos ωt potential) (amplitude –max- of voltage across R) VR = IR - Current in phase with voltage phasors rotate together Inductor in an ac Circuit - Current varies with time self-induced emf di/dt > 0 ε < 0 di ε = −L dt Va > Vb Vab = Va-Vb = V L = L di/dt > 0 di d v = L = L (I cos ωt) L dt dt vL = −IωLsin ωt = IωLcos ()ωt + 90 º “ vL has 90 head start” with respect to i. Inductor in an ac circuit i = I cos ωt vL = IωL cos( ωt + 90 ) VL v = V cos( ωt +ϕ) φ = phase angle = phase of voltage relative to current Pure resistor: φ = 0 Pure inductor: φ = 90º VL High ω low I X = ωL I = Low ω high I Inductive reactance: L ωL Voltage amplitude: VL = IX L = IωL Inductors used to block high ω Capacitor in an ac circuit As the capacitor charges and discharges at each t, there is “i” in each plate, and equal displacement current between the plates, as though charge was conducted through C. dq → dq = I cos ωtdt i = = I cos ωt ∫ ∫ C = q / v dt C I q = sin ωt ω q I I v = = sin ωt = cos( ωt − 90 ) c C ωC ωC I Pure capacitor: φ = 90º VC = ωC º vc lags current by 90 . 1 Capacitive reactance: X = C ωC (amplitude of voltage across C) VC = IX C High ω high I I = VCωC Capacitor in an ac circuit Low ω low I Capacitors used to block low ω (or low f) high-pass filter Comparing ac circuit elements: - R is independent of ω. -XL and X C depend on ω. - If ω = 0 (dc circuit) Xc = 1/ ωC ∞ ic = 0 XL = ωL = 0 - If ω ∞, X L ∞ iL = 0 XC = 0 VC = 0 current changes direction so rapidly that no charge can build up on each plate. Example : amplifier C in tweeter branch blocks low-f components of sound but passes high-f; L in woofer branch does the opposite. 3. The L-R-C Series Circuit - Instantaneous v across L, C, R = vad = v source - Total voltage phasor = vector sum of phasors of individual voltages. - C, R, L in series same current, i = I cos ωt only one phasor (I) for three circuit elements, amplitude I. - The projections of I and V phasors onto horizontal axis at t give rise to instantaneous i and v. VC = IR (amplitudes = maximum VL = IX L values) VC = IX C -The instantaneous potential difference between terminals a,d = = algebraic sum of vR, vC, vL (instantaneous voltages) = = sum of projections of phasors VR, V C, V L = projection of their vector sum (V) that represents the source voltage v and instantaneous voltage vad across series of elements. 2 2 2 2 2 2 V = VR + (VL −Vc ) = (IR ) + (IX L − IX c ) = I R + (X L − X c ) 2 2 Impedance: Z = R + (X L − X c ) V = IZ Z = R2 +[ωL − /1( ωC)] 2 Impedance of R-L-C series circuit Phase angle of the source VL −VC I(X L − X C ) X L − X C tan ϕ = = = voltage with respect to V IR R R current ωL − /1 ωC tan ϕ = R i = I cos ωt v = V cos (ωt +ϕ) V I V I Z = Z rms = rms 2 2 Example 31.5 4. Power in Alternating-Current Circuits 1 P = VI 2 V I V 2 P = = V I = I 2 R = rms av 2 2 rms rms rms R 1 P = VI 2 Power in a General Circuit P = vi = [V cos( ωt +ϕ)][ I cos ωt] = [V (cos ωt cos ϕ − sin ωt sin ϕ)][ I cos ωt] = VI cos ϕ cos 2 ωt −VI sin ϕ cos ωt sin ωt 1 P = VI cos ϕ = V I cos ϕ av 2 rms rms 5. Resonance in Alternating-Current Circuits 1 1 X L = X C ω 0L = ω0 = ω0C LC 6. Transformers dΦ dΦ ε = −N B ε = −N B 1 1 dt 2 2 dt ε N 2 = 2 ε1 N1 V N 2 = 2 V1 N1 V R 2 = I1 (N2 / N1) .
Load more

Recommended publications
  • Glossary Physics (I-Introduction)
    1 Glossary Physics (I-introduction) - Efficiency: The percent of the work put into a machine that is converted into useful work output; = work done / energy used [-]. = eta In machines: The work output of any machine cannot exceed the work input (<=100%); in an ideal machine, where no energy is transformed into heat: work(input) = work(output), =100%. Energy: The property of a system that enables it to do work. Conservation o. E.: Energy cannot be created or destroyed; it may be transformed from one form into another, but the total amount of energy never changes. Equilibrium: The state of an object when not acted upon by a net force or net torque; an object in equilibrium may be at rest or moving at uniform velocity - not accelerating. Mechanical E.: The state of an object or system of objects for which any impressed forces cancels to zero and no acceleration occurs. Dynamic E.: Object is moving without experiencing acceleration. Static E.: Object is at rest.F Force: The influence that can cause an object to be accelerated or retarded; is always in the direction of the net force, hence a vector quantity; the four elementary forces are: Electromagnetic F.: Is an attraction or repulsion G, gravit. const.6.672E-11[Nm2/kg2] between electric charges: d, distance [m] 2 2 2 2 F = 1/(40) (q1q2/d ) [(CC/m )(Nm /C )] = [N] m,M, mass [kg] Gravitational F.: Is a mutual attraction between all masses: q, charge [As] [C] 2 2 2 2 F = GmM/d [Nm /kg kg 1/m ] = [N] 0, dielectric constant Strong F.: (nuclear force) Acts within the nuclei of atoms: 8.854E-12 [C2/Nm2] [F/m] 2 2 2 2 2 F = 1/(40) (e /d ) [(CC/m )(Nm /C )] = [N] , 3.14 [-] Weak F.: Manifests itself in special reactions among elementary e, 1.60210 E-19 [As] [C] particles, such as the reaction that occur in radioactive decay.
    [Show full text]
  • Gold Nanoarray Deposited Using Alternating Current for Emission Rate
    Xue et al. Nanoscale Research Letters 2013, 8:295 http://www.nanoscalereslett.com/content/8/1/295 NANO EXPRESS Open Access Gold nanoarray deposited using alternating current for emission rate-manipulating nanoantenna Jiancai Xue1, Qiangzhong Zhu1, Jiaming Liu1, Yinyin Li2, Zhang-Kai Zhou1*, Zhaoyong Lin1, Jiahao Yan1, Juntao Li1 and Xue-Hua Wang1* Abstract We have proposed an easy and controllable method to prepare highly ordered Au nanoarray by pulse alternating current deposition in anodic aluminum oxide template. Using the ultraviolet–visible-near-infrared region spectrophotometer, finite difference time domain, and Green function method, we experimentally and theoretically investigated the surface plasmon resonance, electric field distribution, and local density of states enhancement of the uniform Au nanoarray system. The time-resolved photoluminescence spectra of quantum dots show that the emission rate increased from 0.0429 to 0.5 ns−1 (10.7 times larger) by the existence of the Au nanoarray. Our findings not only suggest a convenient method for ordered nanoarray growth but also prove the utilization of the Au nanoarray for light emission-manipulating antennas, which can help build various functional plasmonic nanodevices. Keywords: Anodic aluminum oxide template, Au nanoarray, Emission rate, Nanoantenna, Surface plasmon PACS: 82.45.Yz, 78.47.jd, 62.23.Pq Background Owing to the self-organized hexagonal arrays of Excited by an incident photon beam and provoking a uniform parallel nanochannels, anodic aluminum oxide collective oscillation of free electron gas, plasmonic (AAO) film has been widely used as the template for materials gain the ability to manipulate electromagnetic nanoarray growth [26-29]. Many distinctive discoveries field at a deep-subwavelength scale, making them play a have been made in the nanosystems fabricated in AAO major role in current nanoscience [1-5].
    [Show full text]
  • Bringing Optical Metamaterials to Reality
    UC Berkeley UC Berkeley Electronic Theses and Dissertations Title Bringing Optical Metamaterials to Reality Permalink https://escholarship.org/uc/item/5d37803w Author Valentine, Jason Gage Publication Date 2010 Peer reviewed|Thesis/dissertation eScholarship.org Powered by the California Digital Library University of California Bringing Optical Metamaterials to Reality By Jason Gage Valentine A dissertation in partial satisfaction of the requirements for the degree of Doctor of Philosophy in Engineering – Mechanical Engineering in the Graduate Division of the University of California, Berkeley Committee in charge: Professor Xiang Zhang, Chair Professor Costas Grigoropoulos Professor Liwei Lin Professor Ming Wu Fall 2010 Bringing Optical Metamaterials to Reality © 2010 By Jason Gage Valentine Abstract Bringing Optical Metamaterials to Reality by Jason Gage Valentine Doctor of Philosophy in Mechanical Engineering University of California, Berkeley Professor Xiang Zhang, Chair Metamaterials, which are artificially engineered composites, have been shown to exhibit electromagnetic properties not attainable with naturally occurring materials. The use of such materials has been proposed for numerous applications including sub-diffraction limit imaging and electromagnetic cloaking. While these materials were first developed to work at microwave frequencies, scaling them to optical wavelengths has involved both fundamental and engineering challenges. Among these challenges, optical metamaterials tend to absorb a large amount of the incident light and furthermore, achieving devices with such materials has been difficult due to fabrication constraints associated with their nanoscale architectures. The objective of this dissertation is to describe the progress that I have made in overcoming these challenges in achieving low loss optical metamaterials and associated devices. The first part of the dissertation details the development of the first bulk optical metamaterial with a negative index of refraction.
    [Show full text]
  • Oscillating Currents
    Oscillating Currents • Ch.30: Induced E Fields: Faraday’s Law • Ch.30: RL Circuits • Ch.31: Oscillations and AC Circuits Review: Inductance • If the current through a coil of wire changes, there is an induced emf proportional to the rate of change of the current. •Define the proportionality constant to be the inductance L : di εεε === −−−L dt • SI unit of inductance is the henry (H). LC Circuit Oscillations Suppose we try to discharge a capacitor, using an inductor instead of a resistor: At time t=0 the capacitor has maximum charge and the current is zero. Later, current is increasing and capacitor’s charge is decreasing Oscillations (cont’d) What happens when q=0? Does I=0 also? No, because inductor does not allow sudden changes. In fact, q = 0 means i = maximum! So now, charge starts to build up on C again, but in the opposite direction! Textbook Figure 31-1 Energy is moving back and forth between C,L 1 2 1 2 UL === UB === 2 Li UC === UE === 2 q / C Textbook Figure 31-1 Mechanical Analogy • Looks like SHM (Ch. 15) Mass on spring. • Variable q is like x, distortion of spring. • Then i=dq/dt , like v=dx/dt , velocity of mass. By analogy with SHM, we can guess that q === Q cos(ωωω t) dq i === === −−−ωωωQ sin(ωωω t) dt Look at Guessed Solution dq q === Q cos(ωωω t) i === === −−−ωωωQ sin(ωωω t) dt q i Mathematical description of oscillations Note essential terminology: amplitude, phase, frequency, period, angular frequency. You MUST know what these words mean! If necessary review Chapters 10, 15.
    [Show full text]
  • Experiment No. 3 Oscilloscope and Function Generator
    Experiment No. 3 Oscilloscope and Function Generator An oscilloscope is a voltmeter that can measure a fast changing wave form. Wave forms A simple wave form is characterized by its period and amplitude. A function generator can generate different wave forms. 1 Part 1 of the experiment (together) Generate a square wave of frequency of 1.8 kHz with the function generator. Measure the amplitude and frequency with the Fluke DMM. Measure the amplitude and frequency with the oscilloscope. 2 The voltage amplitude has 2.4 divisions. Each division means 5.00 V. The amplitude is (5)(2.4) = 12.0 V. The Fluke reading was 11.2 V. The period (T) of the wave has 2.3 divisions. Each division means 250 s. The period is (2.3)(250 s) = 575 s. 1 1 f 1739 Hz The frequency of the wave = T 575 10 6 The Fluke reading was 1783 Hz The error is at least 0.05 divisions. The accuracy can be improved by displaying the wave form bigger. 3 Now, we have two amplitudes = 4.4 divisions. One amplitude = 2.2 divisions. Each division = 5.00 V. One amplitude = 11.0 V Fluke reading was 11.2 V T = 5.7 divisions. Each division = 100 s. T = 570 s. Frequency = 1754 Hz Fluke reading was 1783 Hz. It was always better to get a bigger display. 4 Part 2 of the experiment -Measuring signals from the DVD player. Next turn on the DVD Player and turn on the accessory device that is attached to the top of the DVD player.
    [Show full text]
  • Oct. 30, 1923. 1,472,583 W
    Oct. 30, 1923. 1,472,583 W. G. CADY . METHOD OF MAINTAINING ELECTRIC CURRENTS OF CONSTANT FREQUENCY Filed May 28. 1921 Patented Oct. 30, 1923. 1,472,583 UNITED STATES PATENT OFFICE, WALTER GUYTON CADY, OF MIDDLETowN, connECTICUT. METHOD OF MAINTAINING ELECTRIC CURRENTS OF CONSTANT FREQUENCY, To all whom it may concern:Application filed May 28, 1921. Serial No. 473,434. REISSUED Be it known that I, WALTER G. CADY, a tric resonator that I take advantage of for citizen of the United States of America, my present purpose are-first: that prop residing at Middletown, in the county of erty by virtue of which such a resonator, 5 Middlesex, State of Connecticut, have in whose vibrations are maintained by im vented certain new and useful Improve pulses; received from one electric circuit, ments in Method of Maintaining Electric may be used to transmit energy in the form B) Currents of Constant Frequency, of which of an alternating current into another cir the following is a full, clear, and exact de cuit; second, that property which it posses 0 scription. ses of modifying by its reactions the alter The invention which forms the subject nating current of a particular frequency or of my present application for Letters Patent frequencies flowing to it; and third, the fact that the effective capacity of the resonator andis an maintainingimprovement alternatingin the art ofcurrents producing of depends, in a manner which will more fully 5 constant frequency. It is well known that hereinafter appear, upon the frequency of heretofore the development of such currents the current in the circuit with which it may to any very high degree of precision has be connected.
    [Show full text]
  • Peak and Root-Mean-Square Accelerations Radiated from Circular Cracks and Stress-Drop Associated with Seismic High-Frequency Radiation
    J. Phys. Earth, 31, 225-249, 1983 PEAK AND ROOT-MEAN-SQUARE ACCELERATIONS RADIATED FROM CIRCULAR CRACKS AND STRESS-DROP ASSOCIATED WITH SEISMIC HIGH-FREQUENCY RADIATION Teruo YAMASHITA Earthquake Research Institute, the University of Tokyo, Tokyo, Japan (Received July 25, 1983) We derive an approximate expression for far-field spectral amplitude of acceleration radiated by circular cracks. The crack tip velocity is assumed to make abrupt changes, which can be the sources of high-frequency radiation, during the propagation of crack tip. This crack model will be usable as a source model for the study of high-frequency radiation. The expression for the spectral amplitude of acceleration is obtained in the following way. In the high-frequency range its expression is derived, with the aid of geometrical theory of diffraction, by extending the two-dimensional results. In the low-frequency range it is derived on the assumption that the source can be regarded as a point. Some plausible assumptions are made for its behavior in the intermediate- frequency range. Theoretical expressions for the root-mean-square and peak accelerations are derived by use of the spectral amplitude of acceleration obtained in the above way. Theoretically calculated accelerations are compared with observed ones. The observations are shown to be well explained by our source model if suitable stress-drop and crack tip velocity are assumed. Using Brune's model as an earthquake source model, Hanks and McGuire showed that the seismic ac- celerations are well predicted by a stress-drop which is higher than the statically determined stress-drop. However, their conclusion seems less reliable since Brune's source model cannot be applied to the study of high-frequency radiation.
    [Show full text]
  • Alternating Current Principles
    Basic Electrical Theory Power Principles and Phase Angle PJM State & Member Training Dept. PJM©2014 10/24/2013 Objectives • At the end of this presentation the learner will be able to; • Identify the characteristics of Sine Waves • Discuss the principles of AC Voltage, Current, and Phase Relations • Compute the Energy and Power on AC Systems • Identify Three-Phase Power and its configurations PJM©2014 10/24/2013 Sine Waves PJM©2014 10/24/2013 Sine Waves • Generator operation is based on the principles of electromagnetic induction which states: When a conductor moves, cuts, or passes through a magnetic field, or vice versa, a voltage is induced in the conductor • When a generator shaft rotates, a conductor loop is forced through a magnetic field inducing a voltage PJM©2014 10/24/2013 Sine Waves • The magnitude of the induced voltage is dependant upon: • Strength of the magnetic field • Position of the conductor loop in reference to the magnetic lines of force • As the conductor rotates through the magnetic field, the shape produced by the changing magnitude of the voltage is a sine wave • http://micro.magnet.fsu.edu/electromag/java/generator/ac.html PJM©2014 10/24/2013 Sine Waves PJM©2014 10/24/2013 Sine Waves RMS PJM©2014 10/24/2013 Sine Waves • A cycle is the part of a sine wave that does not repeat or duplicate itself • A period (T) is the time required to complete one cycle • Frequency (f) is the rate at which cycles are produced • Frequency is measured in hertz (Hz), One hertz equals one cycle per second PJM©2014 10/24/2013 Sine Waves
    [Show full text]
  • Unit I Microwave Transmission Lines
    UNIT I MICROWAVE TRANSMISSION LINES INTRODUCTION Microwaves are electromagnetic waves with wavelengths ranging from 1 mm to 1 m, or frequencies between 300 MHz and 300 GHz. Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that lumped-element circuit theory is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete resistors, capacitors, and inductors used with lower frequency radio waves. Instead, distributed circuit elements and transmission-line theory are more useful methods for design, analysis. Open-wire and coaxial transmission lines give way to waveguides, and lumped-element tuned circuits are replaced by cavity resonators or resonant lines. Effects of reflection, polarization, scattering, diffraction, and atmospheric absorption usually associated with visible light are of practical significance in the study of microwave propagation. The same equations of electromagnetic theory apply at all frequencies. While the name may suggest a micrometer wavelength, it is better understood as indicating wavelengths very much smaller than those used in radio broadcasting. The boundaries between far infrared light, terahertz radiation, microwaves, and ultra-high-frequency radio waves are fairly arbitrary and are used variously between different fields of study. The term microwave generally refers to "alternating current signals with frequencies between 300 MHz (3×108 Hz) and 300 GHz (3×1011 Hz)."[1] Both IEC standard 60050 and IEEE standard 100 define "microwave" frequencies starting at 1 GHz (30 cm wavelength). Electromagnetic waves longer (lower frequency) than microwaves are called "radio waves". Electromagnetic radiation with shorter wavelengths may be called "millimeter waves", terahertz radiation or even T-rays.
    [Show full text]
  • Experiment 12: AC Circuits - RLC Circuit
    Experiment 12: AC Circuits - RLC Circuit Introduction An inductor (L) is an important component of circuits, on the same level as resistors (R) and capacitors (C). The inductor is based on the principle of inductance - that moving charges create a magnetic field (the reverse is also true - a moving magnetic field creates an electric field). Inductors can be used to produce a desired magnetic field and store energy in its magnetic field, similar to capacitors being used to produce electric fields and storing energy in their electric field. At its simplest level, an inductor consists of a coil of wire in a circuit. The circuit symbol for an inductor is shown in Figure 1a. So far we observed that in an RC circuit the charge, current, and potential difference grew and decayed exponentially described by a time constant τ. If an inductor and a capacitor are connected in series in a circuit, the charge, current and potential difference do not grow/decay exponentially, but instead oscillate sinusoidally. In an ideal setting (no internal resistance) these oscillations will continue indefinitely with a period (T) and an angular frequency ! given by 1 ! = p (1) LC This is referred to as the circuit's natural angular frequency. A circuit containing a resistor, a capacitor, and an inductor is called an RLC circuit (or LCR), as shown in Figure 1b. With a resistor present, the total electromagnetic energy is no longer constant since energy is lost via Joule heating in the resistor. The oscillations of charge, current and potential are now continuously decreasing with amplitude.
    [Show full text]
  • MEMS Cantilever Resonators Under Soft AC
    Microelectromechanical Systems Cantilever Resonators Dumitru I. Caruntu1 Mem. ASME Under Soft Alternating Current Mechanical Engineering Department, University of Texas Pan American, 1201 W University Drive, Voltage of Frequency Near Edinburg, TX 78539 e-mail: [email protected] Natural Frequency Martin W. Knecht This paper deals with nonlinear-parametric frequency response of alternating current Engineering Department, (AC) near natural frequency electrostatically actuated microelectromechanical systems South Texas College, (MEMS) cantilever resonators. The model includes fringe and Casimir effects, and damp- McAllen, TX 78501 ing. Method of multiple scales (MMS) and reduced order model (ROM) method are used e-mail: [email protected] to investigate the case of weak nonlinearities. It is reported for uniform resonators: (1) an excellent agreement between the two methods for amplitudes less than half of the gap, (2) a significant influence of fringe effect and damping on bifurcation frequencies and phase–frequency response, respectively, (3) an increase of nonzero amplitudes’ fre- quency range with voltage increase and damping decrease, and (4) a negligible Casimir effect at microscale. [DOI: 10.1115/1.4028887] Introduction linear Mathieu’s equation as the governing equation of motion. Yet, the parametric coefficient was only in the linear terms. Non- Microelectromechanicals systems (MEMS) find their use in linear behavior of electrostatically actuated cantilever beam micro biomedical, automotive, and aerospace. MEMS beams are com- resonators, including fringe effect, has been investigated [11] mon and successfully used as chemical sensors [1], biosensors [2], using MMS and ROM. Yet, the nonlinear behavior was due to AC pressure sensors [3], switches [4], and energy harvesters [5]. voltage of frequency near a system’s half natural frequency of the MEMS systems are nonlinear due to actuation forces, damping resonator, which resulted in primary resonance.
    [Show full text]
  • Wave Guides & Resonators
    UNIT I WAVEGUIDES & RESONATORS INTRODUCTION Microwaves are electromagnetic waves with wavelengths ranging from 1 mm to 1 m, or frequencies between 300 MHz and 300 GHz. Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that lumped-element circuit theory is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete resistors, capacitors, and inductors used with lower frequency radio waves. Instead, distributed circuit elements and transmission-line theory are more useful methods for design, analysis. Open-wire and coaxial transmission lines give way to waveguides, and lumped-element tuned circuits are replaced by cavity resonators or resonant lines. Effects of reflection, polarization, scattering, diffraction, and atmospheric absorption usually associated with visible light are of practical significance in the study of microwave propagation. The same equations of electromagnetic theory apply at all frequencies. While the name may suggest a micrometer wavelength, it is better understood as indicating wavelengths very much smaller than those used in radio broadcasting. The boundaries between far infrared light, terahertz radiation, microwaves, and ultra-high-frequency radio waves are fairly arbitrary and are used variously between different fields of study. The term microwave generally refers to "alternating current signals with frequencies between 300 MHz (3×108 Hz) and 300 GHz (3×1011 Hz)."[1] Both IEC standard 60050 and IEEE standard 100 define "microwave" frequencies starting at 1 GHz (30 cm wavelength). Electromagnetic waves longer (lower frequency) than microwaves are called "radio waves". Electromagnetic radiation with shorter wavelengths may be called "millimeter waves", terahertz Page 1 radiation or even T-rays.
    [Show full text]