Read this rst Basic operations Setup Description of functions ■ Inputting characters ■ Setting app access permissions ■ STEP 3: Setting Internet ■ STEP 5: Setting up a Google account ■ STEP 6: Setting up ngerprint ■ STEP 7: Customizing ■ Basic operations of keys The software keyboard can be used when an When you open apps for the rst time, a prompt This section explains the Setup (setup wizard) connections Set up a Google account to use Google apps such as Gmail, Google Maps and Play Store, etc. your wallpaper This "Setting Guide" describes the main app that requires character or numeric input is screen appears asking you whether to grant the when you turn on the power of the product in basic operations and initial setup. For more started up, or when you touch a character input apps permissions to access certain features of its initial state. Setting Guide information on various functions, refer to the area. or data on the product. "Basic Manual" that comes with this product, Input mode Thank you for purchasing the HTC 10 HTV32 (simply If the screen is displayed, check the content ■ STEP 1: Setting the language called the 'HTV32' or the 'product' from here on). Volume key and the "Instruction Manual Application" that and tap [DENY] or [ALLOW]. For information on how Before you start using the product, read the Safety to set the Wi-Fi network, Adjust the volume of can be used on the product. • If you tap [DENY] in an app, you may not be precautions and Handling precautions in the Basic incoming calls and see 'Wi-Fi connection Manual to ensure you use it correctly and safely. ringtones. able to run the app or its features, or the use settings' on the following of the features may be restricted. ● Basic operations ● Sending and receiving Power key ■ Basic touch panel operations page. This section explains the data with Android Beam Turn on the power. • Depending on the apps or features, a screen basic operating procedures. The product can Switch on/off Sleep mode. Tap/double tap explaining the permissions may be displayed. Setup exchange data with ● Display (touch panel) Also, the prompt screen may appears several This section explains the another device that has a Lightly touch an item on the ① ⑤ Tap SET UP Select an alternative settings to be made when NFC function. Touch with your finger to times or the on-screen display may differ from operate. screen with your nger and Set the Wi-Fi To create a new Enter your rst name Enter your mail Enter your password ⇒ Tap NEXT method of unlocking Con rm the content ⇒ NEXT you turn on the power of the ● Saving power ② ⑥ screen to screen. Check the content carefully FINGERPRINT Back key then release your nger. ③ ⑦ network to connect Google account, tap Or and last name ⇒ NEXT address ⇒ NEXT NEXT the screen when ※ To set up the wallpaper, tap Choose product in its initial state. You can save battery and follow the on-screen instructions. ※ If you want to set up a Home screen wallpaper, then select a ● E-mail (@ezweb.ne.jp) power by turning off Go back to the previous Tapping the same position ④ ⑧ ⇒ NEXT create a new account ※ You cannot use a mail ngerprint after initial the ngerprint wallpaper and tap APPLY. settings functions that are not screen. twice consecutively is called • In this guide, some parts of the screen address that is already setup, tap SKIP FOR authentication does ⑨ ⑩ ⑪ ※ When a prompt ※ If you already have a E-mail is a service that being used. Recently used apps display may be omitted. Google account, enter being used by another NOW. not work. allows you to exchange Making and receiving a double tap. Select the Select English screen appears ● Display a history of ① When inputting characters, the characters asking if you allow your mail address. user. ※ Follow the on-screen ■ STEP 8: HTC SENSE mail messages with mobile calls Home key/Fingerprint recently used apps. assigned to a key(⑩) are displayed in language being (United States) ⇒ instructions to make HOME personal settings phones that support e-mail You can also make phone the product to use scanner reverse order. displayed START mobile data, tap OK. the setting. and with computers. The calls by using contacts. Return to the home screen. Flick e-mail address is decided ● Moving data with au Long touch Slide ② Moves the cursor left. (swipe) If a SMS transmission automatically when you do the Settings menu ■ Turning on the power ③ Tap this key while inputting characters to ■ STEP 2: Allowing HTC to collect ■ STEP 4: Copying settings of initial settings. You can change You can back up or Keep touching While your Operate the screen appears to 《Lock screen》 perform alphanumeric and Japanese Kana usage data existing device your e-mail address decided restore data to the an item with nger is gently screen by conversion. Tap this key before inputting verify your phone at the initial setup later. product from your old your nger. touching the quickly moving Con rm the content ⇒ Select No thanks ⇒ Network settings au phone by using a characters to display a symbol/emoticon list. number, tap VERIFY. ● screen, move it (icking) your NEXT NEXT Make these settings to microSD memory card or ④ Changes the input mode. ※ Receive an SMS. After use Wi-Fi network or Wi-Fi au Smart Pass server. in the desired nger up, down, ※ If you do not allow HTC ※ If you want to copy the completing the initial tethering. direction. right, or left. ⑤ Deletes the character to the left of the cursor. to collect usage data, settings of your existing setup, con rm it. ※ Names of companies and products mentioned herein are ⑥ Moves the cursor right. tap Change usage data Android terminal to the trademarks or registered trademarks of their respective Press and hold On the lock screen, ⑦ Inputs spaces. settings. to clear the product, select Copy owners. The ® and TM symbols are not used in this document. checkbox and tap SAVE. your Google Accounts, for at slide upward or ⑧ Inputs a carriage return and nalizes the apps, and data from your ※ The screen images in this document may be different from the actual least two seconds Check the content ⇒ Check the created Select whether to use Select No thanks ⇒ screen. Also note that a part of the screen images may be omitted. sideways characters being input. other device, tap NEXT Enter your name ⇒ Select whether to until the product and follow the on-screen tap I AGREE account ⇒ NEXT location information tap CONTINUE. ※ This manual uses the abbreviation 'app' in place of 'application'. ⑨ Toggles between upper-case and lower-case Tap START Follow the on- allow HTC to collect information on your May 2016, 1st Edition vibrates, and then instructions. and communication ※ As necessary, select characters. the payment options, current location and usage data ⇒ NEXT Sold by: KDDI CORPORATION・ OKINAWA CELLULAR release it services ⇒ NEXT screen instructions ⑩ Input characters. tap CONTINUE and to register the ※ Your Google account name (part before @) set TELEPHONE COMPANY ※ After a while, the ※ If a con rmation screen follow the on-screen in STEP 5 has already been entered. If you did Imported by: HTC NIPPON Corporation lock screen appears. ⑪ Inputs a ' , ', ' . ', symbol, or space. appears, tap ACCEPT. instructions. ngerprint ⇒DONE not set a Google account, 'HTV32' is entered. Manufactured by: HTC Corporation

Setup (continued) E-mail (@ezweb.ne.jp) settings The settings to use the convenient au functions and services are easy to do. au ID※ Register your au phone number or any character string for au ID (user ID). ■ Changing your e-mail address ■ STEP 9: au Easy Setting This section describes how to set up an au ID on the initial settings screen, which appears when you rst turn on the power after purchasing the product. au ID password Register the password for the au ID. Setup of e-mail You can change your e-mail address decided at the initial setup later. The settings can be changed with the "au ID Settings" app. ■ The same au ID as another user's cannot be registered. ※ Use of e-mail (@ezweb.ne.jp) requires an LTE NET subscription. 《E-mail settings If you did not subscribe when you purchased your product, contact an au shop or Customer Service screen》 Center. The e-mail address is decided automatically when you do the initial settings.

Con rm the content ⇒ Con rm the content ⇒ Next Select Register "au ID" ⇒ Tap au IDの設定・保存 (Set/ Input your security number Input your password ⇒ 設定 Tap 終了 (Exit) Select Update ⇒ Next Read the terms of service Check the content ⇒ Agree NEXT Next save au ID) ⇒ OK (Setting) ※ If a screen appears con rming ⇒ select Agree ⇒ Next ※ If you selected Disagree on the On the home screen, Tap MENU Tap E-mail settings Tap Other settings Con rm the content ⇒ Terms of Service screen at the Initial ※ The initial value of a security the use of au Market, check If a security con rmation ※ Setup, a caution screen will appear. tap 接続する (Connect) number is a four digit number the content, and tap 次へ screen appears, tap ACCEPT. chosen by the customer and (NEXT). If you tap OK, the exit screen of the On the home screen, tap Con rm the content ⇒ Check your e-mail noted on the application form. au Easy Setting will appear. 接続する (Connect) address ⇒ 閉じる (Close) If you grant the Lookout for au If a screen appears permissions to prompting you to access certain select home apps, capabilities of or data select home apps to on the product, the use or the number of pre-con guration of times of usage. the app is complete. Tap Eメ ー ル アドレス の Input your security Con rm the content ⇒ Input your e-mail Tap OK ⇒ 閉じる (Go to change number ⇒ (Send) (Accept) address ⇒ (Send) (Close) Check the content ⇒ To use a Check the content. ⇒ To Check the content. ⇒ To use Check the content ⇒ To use Con rm the content ⇒ OK Select the data to restore to Select recommended apps Con rm the content ⇒ 変更へ 送信 承諾する 送信 e-mail address) data backup app, select Turn use au Basic Home, select Texting While Walking Alert Lookout for au app, select your terminal from among to install ⇒ 次へ (Next) Finish Check the content ⇒ Select 同意する (Agree) Auto Backup on ⇒ Next Activate ⇒ Next app, select Activate ⇒ Next Activate ⇒ Next those backed up in the au ※ If a different screen appears, Smart Pass ⇒ (Next) Close ⇒ 完了 (Done) ※ If you do not want to use ※ If you do not want to use ※ If you do not want to use Texting ※ If you do not want to use 次へ follow the on-screen Continued to Automatic Backup service, tap au Basic Home, tap Skip While Walking Alert app, tap Lookout for au app, tap Skip ※ If no data is selected, the instructions to perform the ※ To see the detailed the next page Turn Auto Backup off ⇒ Next. activation ⇒ Next. Skip activation ⇒ Next. activation ⇒ Next. screen does not appear. operation. information, tap Detail. E-mail (@ezweb.ne.jp) Network settings Sending and receiving data with Android Beam Saving power settings (continued) Perform this operation in the environment where you can receive signals from the wireless LAN ■ Setup of Wi-Fi tethering ■ Wi-Fi connection settings devices that you want to access and the public wireless LAN service. You can use the product as the wireless LAN hot spot to enable Internet connection from the client (PC, The product can exchange data with another ■ Setup of NFC function ■ Sending data You can reduce battery power consumption ■ Checking your e-mail address You can connect to the Internet using a wireless etc.) that supports wireless LAN (Wi-Fi). device that has a NFC function. In order to transfer data using Android Beam, NFC function A user operation for sending data varies depending on the function. This section describes the operation to send a contact (pro le). by turning off functions (Wi-Fi, Bluetooth, Wi- You can check your e-mail address from the LAN (Wi-Fi) environment built in your home, or ※ To use the tethering function, a separate subscription is required. To send or receive data using Android Beam, must be activated. e.g.) When sending a pro le Fi tethering and screen auto rotation, etc.) E-mail settings screen. a public wireless LAN environment away from both sending and receiving devices must have that are not being used on Quick Settings For the information on how to display the home. the NFC function activated. panel if you want to use the product for a long E-mail settings screen, see 'Changing your Before making wireless LAN (Wi-Fi) settings, Ensure to keep holding the product and time. the other device back to back until the data If the account e-mail address' on the front side. check the following information. selection screen communication is complete. ■ Turning functions on/off The name set for the public appears, select wireless LAN service or the account from SSID wireless LAN device to be which you want connected to to send your pro le. The password to connect On the home screen, tap Tap Wi-Fi Tap . The icon turns to the public wireless LAN ⇒ Settings into Password service or wireless LAN On the home screen, Tap OK Tap . The icon turns On the home screen, Tap More On the home screen, Tap My pro le Tap ⇒ Send my Tap Send contact device tap ⇒ Settings ⇒ into tap ⇒ Settings tap ⇒ People pro le via More ⇒ Mobile network ※ Connection to all public wireless LAN services is not sharing Wi-Fi tethering guaranteed. ⇒ ■ Receiving data On the E-mail This displays the ※ You may need a separate contract with the service When holding the product provider to use some public wireless LAN services. and the other device back settings screen, e-mail address of NFC area Move the back Slide the status Tap the icon of the tap E-mail the product. ※ Enabling the wireless LAN (Wi-Fi) function uses a lot to back, data is received. bar down with two function you want of battery power. When a of the product information. We recommend turning off the wireless LAN (Wi-Fi) con rmation toward the back ngers or slide the to switch on/off. function when not using it. screen appears of the other status bar down ※ We recommend making security settings such as telling that device. twice. About PC mail settings 'WEP' or 'WPA/WPA2 PSK' to prevent unauthorized a separate access. Tap the network (SSID) Input the password ⇒ On the home screen, tap Mail to subscription is ⇒ to connect to CONNECT set up PC mail (POP3/IMAP), company required, tap OK. ※ The settings are nished Tap . The icon Tap NFC Select the checkbox Tap SEND ⇒ tap the Exchange Server mail, Gmail, Yahoo Mail, when appears at the and Outlook.com. top of the screen. turns into of the item to send screen For details, refer to the "Instruction Manual When is displayed at the application". top of the screen, follow the on-screen instructions to connect the client (PC, etc.) to the product ⇒ OK

Making and receiving calls Transferring data with au Settings menu

Making calls Making calls from People You can back up or restore data to the product Restoring data with au Settings menu When you select [SDカ ード から 復 元 す る ] When you select [auスマートパスのサーバから戻す] ■ ■ from your old au phone by using a microSD ■ memory card or au Smart Pass server. • If you back up or restore data by using au Smart Pass server, you need to set up an au ID. • If you restore data by using a microSD memory card, save the data from your old phone to the microSD memory card. ※ In this document, 'microSD memory card', 'microSDHC memory card' and 'microSDXC memory card' are abbreviated as 'microSD memory card'.

On the home screen, Input the phone To hang up the call, tap On the home screen, Tap the contact you Tap the of the To hang up the call, tap On the home screen, tap ⇒ Tap au Settings Menu Tap Data Transfer Select a desired method for If you tap SDカードから復元する Tick the data to restore ⇒ 戻す Tap 完了 (Completed) Tick the data to restore ⇒ 戻す Tap 完了 (Completed) tap number you want to END CALL tap ⇒ People wish to call number you want to END CALL Settings restoring data. (Restore form SD card), select (Restore) (Restore) call ⇒ CALL call ※ If you restore data with auス マ ート the type of your old au phone. ※ This screen appears if you tap ス パスのサーバから戻す (restore data ※ This screen does not appear if you tap マートフォンのデータを戻す (Restore backed up on the au Smart Pass auスマートパスのサーバから戻す (restore smartphone data) for the type of server), you need to set up an au ID. data backed up on the au Smart Pass your au phone. ■ Receiving calls server) for data restoration method. • If SYNC call is turned on • If in screen lock • If SYNC call is turned off, and the product is in When you select [SD ] When you select [au ] mode Sleep mode (without lock screen) ■ Backing up with au Settings menu カ ード に 保 存 す る スマートパスのサーバに預ける To automatically back up your photos and address book in the au Smart Pass server by using a data backup application, perform the following operations.

On the home screen, tap ⇒ Settings ⇒ au Settings Menu ⇒ Backup Setting ⇒ Tick the data to be When a call comes in, To hang up the call, tap When a call comes in, To hang up the call, tap When a call comes in, To hang up the call, tap On the home screen, tap ⇒ Tap au Settings Menu Tap Data Transfer Select a location in which to back up data Tick the data to save ⇒ 保存する Tap 完了 (Completed) Tick the data to back up ⇒ 預ける Tap 完了 (Completed) automatically backed up tap Accept/Speaker End slide ANSWER upward END CALL tap ANSWER END CALL Settings ※ If you back up the data with auスマー (Save) (Back up) トパスのサーバに預ける (back up data or to the right on the au Smart Pass server), you need to set up an au ID.