DOCSLIB.ORG

Ruling, Measuring, Calculators 61

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ruling, Measuring, Calculators 61 RULING, MEASURING, CALCULATORS 61 All architect scales have the following Mechanical drafting scales have the graduations unless otherwise noted: All engineer scales have the following following graduations: 1/8, 1/4, 1/2, 3/32, 3/16, 1/8, 1/4, 1/2, 1, 3/8, 3/4, 1½, graduations unless otherwise noted: 1" to the foot; 1/4, 3/8, 1/2, 3/4 size; 3" to the foot; one edge to 16ths 10, 20, 30, 40, 50, 60 parts to the inch 50ths and 16ths ALVIN® ® ® 4" Mini ALVIN ALVIN ® Aluminum Triangular Scales ALVIN 240P Series Plastic 270P Series Boxwood-Color Professional pocket scale constructed 110 Series Student/ Professional Triangular Scales Plastic Triangular Scales of solid aluminum for light weight and Vocational Triangular Scales Professional-quality scales made from High-quality scales made from high- durability. Features tapered edges and These 12" triangular scales are ideal high-impact plastic with white, non- impact, boxwood-color plastic with color-coded furrows. Comes in vinyl sheath. for scholastic and vocational use. Satin reflecting, matte faces and tapered edges. tapered edges. Hot foil-stamped finish, high-impact plastic with tapered Machine-engraved graduations and color- graduations and color-coded furrows. No. Description edges. Sharp, easy-to-read graduations coded furrows. Supplied in hard plastic Supplied in plastic sleeve. 12". 30ATS Architect resist wear. case. 12". 31ATS Engineer No. Description 37ATS Metric, 1:100, 1:200, 1:300, No. Description SRP No. Description 270P Architect 1:400, 1:500, 1:600 Architect 240P Architect, 271P Engineer with left to right 270PX Mechanical drafting SRP $10.25 ea 110P White $4.65 ea reading calibrations SRP $15.25 ea 110PC White, 4.90 ea 241P Engineer blister-carded 244P Mechanical drafting 110PY Yellow 9.95 ea 247P Metric, 30cm, 1:20, 1:333, Engineer 1:40, 1:50, 1:80, 1:100 End view 111P White 4.65 ea SRP $15.50 ea ALVIN® (actual size) 111PC White, 4.95 ea 40 Series 4" Mini Hardwood blister-carded 111PY Yellow 9.95 ea Triangular Scales ALVIN® Professional-quality scales with a solid Mechanical drafting (architect/engineer) 240B Series Bamboo hardwood core, white, high-impact plastic 110PX White 4.65 ea Professional Triangular Scales laminated faces and tapered edges. 110PXY Yellow 9.95 ea Machine-engraved graduations and color- Professional-quality scales with a bamboo coded furrows. Supplied in plastic sleeve. Metric (white, 30cm) core, white high-impact plastic laminated 117PM 1:20, 1:333, 4.65 ea faces and tapered edges. Machine No. Description 1:40, 1:50, engraved divisions and color-coded 40MTS Architect 1:80, 1:100 furrows. Supplied in hard plastic case. 12". 41MTS Engineer 121PM 1:100, 1:200, 4.65 ea No. Description SRP 47MTS Metric, 10cm, 1:100, 1:200, 1:250, 1:300, 1:300, 1:400, 1:500, 1:600 1:400, 1:500 Architect SRP $17.95 ea 240B $33.50 ea Combination (English/metric) 119PC 1:100 metric, 4.65 ea Engineer 10 and 50 parts to the inch, 241B Double-numbered 33.50 ea 610A 1/4, 1/2 size; 50ths and 32nds, ALVIN® 245B 10, 20, 25, 30, 40, 50 33.50 ea full size Professional 12" Triangular parts to the inch ALVIN® 120PC 1:50, 1:100 metric, 8.95 ea Scales Display Assortment 50ths and 16ths full size, 1/4, Size: 16¼"w x 7¼"w x 6¼"d 600 Series 1/2 size, 1/8 and 1/4 = 1 foot 6" Plastic Triangular Scales Contents: 36 scales: 240P, 241P, 244P, 247P High-quality scales made from high- No. 6222D impact plastic with white, non-reflecting, SRP $558.00 matte faces and tapered edges. Printed graduations and color-coded furrows. No. Description SRP 610A Architect $6.25 ea 610E Engineer 6.25 ea ALVIN® P600C Set of two (one each) 11.75 st 740PM Series Metric Plastic Triangular Scales Professional-quality metric scales made from high-impact plastic with white, non- reflecting, matte faces and tapered edges. ALVIN® Hot-stamped graduations and color-coded furrows. Supplied in hard plastic case. 30cm. 240BP Series Black Plastic ALVIN® Triangular Scales No. Description Scale Guard Professional-quality scales made from 740PM 1:20, 1:25, 1:50, 1:75, Fits most standard triangular scales. A high-impact plastic with black, non- 1:100, 1:125 742PM 1:100, 1:200, 1:250, 1:300, perfect handle for lifting and maneuvering ® reflecting, matte faces and tapered edges. scales. Assorted colors for easy scale ALVIN Machine-engraved white graduations and 1:400, 1:500 identification. Maintains scale orientation Student 12" Triangular Scales color-coded furrows. Supplied in hard 743PM 1:100, 1:200, 1:300, 1:400, so graduations always face down. Display Assortment plastic case. 12". 1:500, 1:600 Size: 16¼"w x 7¼"w x 6¼"d 744PM 1:2.5, 1:5, 1:10, 1:20, No. Description SRP No. Description Contents: 66 scales: 110P, 110PX, 111P, 117PM 1:50, 1:100 669DZ Bagged, 12-pack $10.50 dz 240BP Architect 748PM 1:20, 1:25, 1:333, 1:50, 669BC Blister-carded, 1.79 pk No. 7222D 241BP Engineer 1:75, 1:100 2-pack SRP $306.90 SRP $15.50 ea SRP $17.95 ea 62 RULING, MEASURING, CALCULATORS Front Back 3010 Series ALVIN® ® 2200M Series Solid ALVIN Aluminum Triangular Scales 250 Series High-quality anodized aluminum scales Mechanical Draftsmen have a large profile, solid core, and White Plastic Flat Scale tapered edges. Printed black graduations. 12" opposite-bevel white scale made 12" supplied in hard plastic case. 18" and of high-impact plastic. Engine-divided 24" supplied in plastic sleeve. graduations. Double-numbered, full size, inches reading to 32nds. Full size, inches No. Description SRP reading to 50ths. Supplied in vinyl sheath. Architect No. 258P 2200M-1 12" $22.50 ea 3030 Series ALUMICOLOR™ SRP $26.50 ea 2200M-118 18" 29.95 ea 3000 Series Colored 2200M-124 24" 43.00 ea Aluminum Triangular Scales Engineer Lightweight, professional-quality scales 2200M-2 12" 22.50 ea are made from color-anodized aluminum with printed graduations on ultra-smooth, Metric mark-resistant surface. Supplied in hard 2200M-3 30cm, 1:20, 22.50 ea plastic case. 1:25, 1:50, 1:75, ALUMICOLOR™ ALVIN® 1:100, 1:125 No. Description 3000 Series 764 Series English/Metric 2200M-5 30cm, 1:100, 22.50 ea 6" scales, solid core Colored 6" Aluminum Mechanical Draftsmen Flat Scale 1:200, 1:250, Architect 1:300, 1:400, 1:500 Triangular Scale Display 12"/30cm four-bevel white scale made 3010-1 Silver 2200M-6 30cm, 1:500, 22.50 ea Size: 6½"w x 10"h x 4¾"d of high impact plastic. All graduations 3010-2 Gold 1:1000, 1:1250, Contents: 35 total scales in silver, blue are double numbered. Full size – inches 3010-4 Red 1:1500, 1:2000, 1:2500 and black: 15 architect scales, to 50ths and 32nds. Half size – inches 3010-5 Blue 15 engineer scales, to 16ths. Metric to 1mm. Supplied in 3010-9 Black 5 combo scales vinyl sheath. SRP $6.25 ea No. A3300D No. 764PM Engineer SRP $205.95 SRP $14.50 ea 3210-1 Silver 3210-2 Gold ® ALVIN 3210-4 Red 98 Series Black Aluminum 3210-5 Blue Triangular Scales 3210-9 Black High-quality, black anodized aluminum SRP $6.25 ea scales have a large profile, hollow Metric (15cm) ALVIN® core, and tapered edges. Printed white 3410-1 Silver, 1:100, 1:200, 1:250, ALVIN® graduations and color inlaid furrows. Series 280 1:300, 1:400, 1:500 Series 310 Supplied in hard plastic case. 12". White Plastic Flat Scales SRP $6.25 ea White Plastic Flat Pocket Scales 12" two-bevel white architect scales made No. Description Combo (inch/metric) 6" four-bevel white scales made of 98/ARC Architect of high-impact plastic. Engine-divided 1/8 and 1/4 = 1 foot; 16ths full size, high-impact lightweight plastic. Printed graduations. Supplied in vinyl pocket sheath. 98/ENG Engineer 10 and 50 parts to the inch graduations. Supplied in vinyl sheath. SRP $25.00 ea 1:100 and 1:500 metric No. Description No. Graduations 3610-1 Silver 280P 1/8" and 1/4" to the foot u SRP $6.25 ea 310A 1/8, 1/4, 1/2, 1, 3/8, 3/4, 280XP In 16ths and 32nds to represent 1½, and 3" to the foot 200' on the 16th scale; 12" scales, hollow core l 311E 10 and 50, 30, in 16ths and 32nds to represent Architect and 40 parts to the inch 400' on the 32nd scale; 3030-1 Silver SRP $6.50 ea FAIRGATE® 1/16" and 1/32" to the foot 3030-2 Gold KEY: ♦ Architect l Engineer SRP $38.00 ea T Series Solid Aluminum 3030-9 Black Triangular Scales SRP $9.95 ea Rugged, professional-quality scales are Engineer made from anodized aluminum with a 3230-1 Silver solid core. Printed black graduations on 3230-2 Gold non-glare finish and color-coded furrows. 3230-9 Black Sold individually, shrink-wrapped. SRP $9.95 ea 260P 266P No. Description SRP Metric (30cm) ALVIN® Architect 3430-1 Silver, 1:100, 1:200, 1:250, Series 260 White Plastic Flat Scales TA6 6" $12.15 ea 1:300, 1:400, 1:500 Four-bevel white scales made of high-impact plastic. Printed graduations. TA12 12" 15.50 ea SRP $9.95 ea Supplied in vinyl sheath. TA18 18" 22.75 ea TA24 24" 24.25 ea 12" scales, solid core No.
Load more

Recommended publications
  • A Manual on FOREST SURVEYING 7Th Edition
    A Manual on FOREST SURVEYING th 7 Edition by: Dr. Ross Tomlin Tillamook Bay Community College © 2021 Ross Tomlin A Manual on Forest Surveying Table of Contents CHAPTER 1: HORIZONTAL MEASUREMENTS page 3 1.1 INTRODUCTION page 3 1.2 ACCURACY AND PRECISION page 4 1.3 ERRORS IN SURVEYING page 5 1.4 PACING DISTANCES page 6 1.5 CALCULATING RATIO OF ERROR FOR DISTANCES page 10 1.6 TAPING DISTANCES page 11 1.7 CONVERTING SLOPE TO HORIZONTAL DISTANCES page 12 1.8 PRACTICE PROBLEMS IN HORIZONTAL MEASUREMENTS page 18 CHAPTER 2: LEVELING page 19 2.1 INTRODUCTION TO LEVELING page 19 2.2 DIRECT LEVELING- DIFFERENTIAL page 21 2.3 PROFILE LEVELING page 25 2.4 INDIRECT LEVELING page 26 2.5 STADIA page 27 2.6 PRACTICE PROBLEMS IN LEVELING page 28 CHAPTER 3: ANGULAR MEASUREMENTS page 29 3.1 MEASURING DIRECTION page 29 3.2 PRACTICE PROBLEMS IN MEASURING DIRECTION page 36 3.3 HAND AND STAFF COMPASS page 37 3.4 CLOSED TRAVERSES page 41 3.5 PRACTICE PROBLEMS IN TRAVERSING page 45 CHAPTER 4: BASIC MAPPING SKILLS page 46 4.1 MAPPING CLOSED TRAVERSES page 46 4.2 CLOSED TRAVERSE COMPUTATIONS page 50 4.3 PRACTICE PROBLEMS IN TRAVERSE COMPUTATIONS page 57 4.4 TOPOGRAPHIC MAP READING page 58 4.5 ORIENTEERING page 62 4.6 COORDINATE SYSTEMS ON MAPS page 65 4.7 MEASURING COORDINATES ON A MAP USING INTERPOLATION page 71 4.8 PRACTICE PROBLEMS IN TOPOGRAPHIC MAPS page 73 A Manual on Forest Surveying page 1 CHAPTER 5: HIGH LEVEL TRAVERSING page 74 5.1 TRANSIT AND THEODOLITE page 74 5.2 TRAVERSING WITH THEODOLITES page 76 5.3 HIGH LEVEL TRAVERSE COMPUTATIONS page 80 5.4 PRACTICE
    [Show full text]
  • Read Book Mathematical Drawing and Measuring Instruments Ebook
    MATHEMATICAL DRAWING AND MEASURING INSTRUMENTS PDF, EPUB, EBOOK William Ford Stanley | 382 pages | 19 Aug 2017 | Andesite Press | 9781375478311 | English | none Mathematical Drawing and Measuring Instruments PDF Book Bi-Colour Pencils. How can measuring mistakes be avoided? Rates are now changing rapidy, often with little notice to us, so all the data has been transferred to the FAQ page for speedy updating. Select the drafting set that fits your needs best. Units on that kind of the ruler are millimeters, inches, agate, picas, and points. Loose Sheets. Just CLICK on the icon of the rule type you are looking for at the left , to see the matching catalog. Save my name, email, and website in this browser for the next time I comment. A truly beautiful set. Tech Pouches. If we have your valid data on file , you can just click on the ORDER email link to place an order and indicate your approval to bill, and we will do the rest. Want something? Round Brushes Flat Brushes. Back in the day when children used to write on slates in school, they needed a cloth to clean their slates. Mixed Media Colours. Full Name Comment goes here. Has a 45 degree adjustment range, which permits degrees and degrees by rotating the triangle. Oil Pastels. Mathematics Laboratory,Club,Library. Glitter Pens. Rolling parallel ruler Cleaning Kits. Fab A5. Vintage B5. No marks or owner's ID. One leg contains needle at the bottom and other leg contains a ring in which a pencil is placed. You will receive a link and will create a new password via email.
    [Show full text]
  • Using a Scale Ruler;
    Using a Scale Ruler; What is Scale and why do we use it. Designers and Architects use ‘scale’ so they can draw on paper a small replica of the real space, ​ building or layout as it will be when built, but in miniature, so that everything is in proportion and you can carry the drawings around and work on them. There are different scales you can use giving you larger scale drawings or small scale. An example of this is if you look at the Deeds of your house you should find a ‘site location plan to scale’ at possibly 1:500. It just shows the outline of your ​ ​ property in relation to other buildings and roads etc It does not show detail of the building but … will show out-houses or drive ways. It also has a red line around your boundary which confirms the land your property will occupy and forms part of your contract on purchase. Architects will often use a scale of 1:100 to draw up an outline of a new building and it will show ​ details of how the property is divided up into rooms, stairs entrances and different floor levels. Using the scale of 1:50 you can put a lot more detail in, showing basic furniture layouts within the ​ rooms and identifying bathrooms and kitchens with fitted units shown and changes of ceiling height, floor levels and is often used for planning applications with a site plan or a plan at 1:100 depending on the type of application and the details required.
    [Show full text]
  • Scale and Dimensioning (Mechanical Board Drafting)
    Youth Explore Trades Skills Design and Drafting – 2D Drawing Scale and Dimensioning (Mechanical Board Drafting) Description In this activity, the teacher will first select an object that is larger than the page and scale it to fit in the drawing area to explain metric scale. Second, the teacher will then dimension the scaled object using standard conventions. Students will use paper with a title block to complete this activity. Students will also continue to improve their skills with lettering techniques and lineweights. Lesson Objectives The student will be able to: • Complete a board set-up • Identify and appropriately use drafting tools • Differentiate lineweights by varying pencil pressure while creating scale drawings of objects • Determine the appropriate scale to ensure an object is proportionally drawn • Incorporate dimensioning standards • Refine lettering techniques Assumptions The student will: • Have a basic knowledge of drafting tools and equipment • Understand the basics of appropriate use of drafting equipment • Have previously drawn a title block for use in completing this activity Terminology Aligned dimensions: numerical dimension values that are aligned with the direction of the dimension line. The drawing therefore has to be turned to correctly read the dimensions. Border lines: thick, dark lines used to create a solid border around a blank page. Dimensions: a measurement of something in a specific linear direction. Most often this includes the length, width, and height of an object. Dimension lines: lines spanning the distance between extension lines; they have arrowheads and include a numerical dimension measurement. Drafting board: a flat, smooth surface usually covered in vinyl, which helps to hold paper affixed to it.
    [Show full text]
  • Make Your Own Ruler Template
    Make Your Own Ruler Template Cryptal Sherman detonating, his subcostas transmogrifying adjudges ablins. Stinky usually blitz afield or focalises unimaginatively when peristomatic Gregorio lapidating railingly and discretely. Which Brice scribed so betweenwhiles that Woodrow mollycoddle her logwoods? Clipart for free or amazingly low! We have a lot of different scales represented in this single ruler. Art had been going through once I had got the core features done and were making the UI look good and remove all my placeholders. Too many lines, could not focus and find where I wanted to measure, just plain awful. Folding Rule Bers Scale. Or dented and this is obviously not wanted on the same size and patterns for hundreds of years classes give. This method allows you to use your regular quilting ruler with your paper template to get the nice sturdy straight edge of the ruler without needing to buy a specially shaped one. From right side, press into one triangle. Allow for drying time. This is an virtual ruler that can be adjusted to an actual size It is a mini tapeline app and scale ruler app. Save some money this Halloween and work out fine motor skills by helping your child make his very own computer costume. These are natural imperfections which add character to your ruler. If you map is labeled in more than one format, select the one that best matches the distance between tic marks and grid lines. Thank you Mark for the demo at Alden Lane! You certainly came up with a good idea! Abstract Black and White Ink Blot Scarf Dyed with the Sun! Any chance of getting that file as a JPG or PNG? After this I switch back to the original template, and so on, down the whole strip.
    [Show full text]
  • Engineering Drawing
    LECTURE NOTES For Environmental Health Science Students Engineering Drawing Wuttet Taffesse, Laikemariam Kassa Haramaya University In collaboration with the Ethiopia Public Health Training Initiative, The Carter Center, the Ethiopia Ministry of Health, and the Ethiopia Ministry of Education 2005 Funded under USAID Cooperative Agreement No. 663-A-00-00-0358-00. Produced in collaboration with the Ethiopia Public Health Training Initiative, The Carter Center, the Ethiopia Ministry of Health, and the Ethiopia Ministry of Education. Important Guidelines for Printing and Photocopying Limited permission is granted free of charge to print or photocopy all pages of this publication for educational, not-for-profit use by health care workers, students or faculty. All copies must retain all author credits and copyright notices included in the original document. Under no circumstances is it permissible to sell or distribute on a commercial basis, or to claim authorship of, copies of material reproduced from this publication. ©2005 by Wuttet Taffesse, Laikemariam Kassa All rights reserved. Except as expressly provided above, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission of the author or authors. This material is intended for educational use only by practicing health care workers or students and faculty in a health care field. PREFACE The problem faced today in the learning and teaching of engineering drawing for Environmental Health Sciences students in universities, colleges, health institutions, training of health center emanates primarily from the unavailability of text books that focus on the needs and scope of Ethiopian environmental students.
    [Show full text]
  • User's Manual Cameo
    MARPLOT® MAPPING APPLICATION FOR RESPONSE, PLANNING, User’s Manual AND LOCAL OPERATIONAL TASKS AUGUST 1999 GEMENT OF EM D ST A A E E IT TE N R N S A E U G • Y U.S. ENVIRONMENTAL Chemical Emergency Preparedness • N M E C V N N I R D E C O G PROTECTION AGENCY E and Prevention Office N A Y M D E N I N IO O T T Washington, D.C. 20460 A C A L P TE RO - P E R ATMOSPH D R AN ER I E IC C N A A D E M A NATIONAL OCEANIC T Hazardous Materials C I N O I S T L T A U R N A I O T P I I O T AND ATMOSPHERIC Response Division O A N N N M S U O . E S C . C D ADMINISTRATION Seattle, Washington 98115 R E E PA M RT OM MENT OF C c ameo® Contents 1 Welcome to MARPLOT 1.1 About this manual.........................................................................................1 1.2 About MARPLOT .........................................................................................2 1.2.1 Objects ...........................................................................................2 1.2.2 Layers ............................................................................................2 1.2.3 Maps ..............................................................................................2 1.2.4 Relationship between maps and layers ...................................3 1.2.5 Views .............................................................................................3 1.2.6 The Search Collection and the selected objects .......................4 1.2.7 Linking objects to data in other programs ...............................4 1.2.8 Object identification
    [Show full text]
  • NFSTC Crime Scene Investigation Guide
    2013 Crime Scene Investigation A Guide For Law Enforcement Bureau of Justice Assistance U.S. Department of Justice CRIME SCENE INVESTIGATION A Guide for Law Enforcement Crime Scene Investigation A Guide for Law Enforcement September 2013 Original guide developed and approved by the Technical Working Group on Crime Scene Investigation, January 2000. Updated guide developed and approved by the Review Committee, September 2012. Project Director: Kevin Lothridge Project Manager: Frank Fitzpatrick National Forensic Science Technology Center 7881 114th Avenue North Largo, FL 33773 www.nfstc.org i CRIME SCENE INVESTIGATION A Guide for Law Enforcement Revision of this guide was conducted by the National Forensic Science Technology Center (NFSTC), supported under cooperative agreements 2009-D1-BX-K028 and 2010-DD-BX-K009 by the Bureau of Justice Assistance, and 2007-MU-BX-K008 by the National Institute of Justice, Office of Justice Programs, U.S. Department of Justice. This document is not intended to create, does not create, and may not be relied upon to create any rights, substantive or procedural, enforceable at law by any party in any matter, civil or criminal. Opinions or points of view expressed in this document represent a consensus of the authors and do not necessarily reflect the official position of the U.S. Department of Justice. www.nfstc.org ii CRIME SCENE INVESTIGATION A Guide for Law Enforcement Contents A. Arriving at the Scene: Initial Response/ Prioritization of Efforts ................................. 1 1. Initial Response/ Receipt of Information .......................................................................... 1 2. Safety Procedures ................................................................................................................... 2 3. Emergency Care ...................................................................................................................... 2 4. Secure and Control Persons at the Scene ...........................................................................
    [Show full text]
  • Crime Scene Investigation
    2013 Crime Scene Investigation A Guide For Law Enforcement Bureau of Justice Assistance U.S. Department of Justice CRIME SCENE INVESTIGATION A Guide for Law Enforcement Crime Scene Investigation A Guide for Law Enforcement September 2013 Original guide developed and approved by the Technical Working Group on Crime Scene Investigation, January 2000. Updated guide developed and approved by the Review Committee, September 2012. Project Director: Kevin Lothridge Project Manager: Frank Fitzpatrick National Forensic Science Technology Center 7881 114th Avenue North Largo, FL 33773 www.nfstc.org i CRIME SCENE INVESTIGATION A Guide for Law Enforcement Revision of this guide was conducted by the National Forensic Science Technology Center (NFSTC), supported under cooperative agreements 2009-D1-BX-K028 and 2010-DD-BX-K009 by the Bureau of Justice Assistance, and 2007-MU-BX-K008 by the National Institute of Justice, Office of Justice Programs, U.S. Department of Justice. This document is not intended to create, does not create, and may not be relied upon to create any rights, substantive or procedural, enforceable at law by any party in any matter, civil or criminal. Opinions or points of view expressed in this document represent a consensus of the authors and do not necessarily reflect the official position of the U.S. Department of Justice. www.nfstc.org ii CRIME SCENE INVESTIGATION A Guide for Law Enforcement Contents A. Arriving at the Scene: Initial Response/ Prioritization of Efforts ................................. 1 1. Initial Response/ Receipt of Information .......................................................................... 1 2. Safety Procedures ................................................................................................................... 2 3. Emergency Care ...................................................................................................................... 2 4. Secure and Control Persons at the Scene ...........................................................................
    [Show full text]
  • ?Ro1essional-Serviceman-Adiotrician HUGO GERNSBACK Editor
    Dec adio afit 25 Cents for the ?ro1essional-Serviceman-adiotrician HUGO GERNSBACK Editor Wen who have made radio: SirOliverLodge www.americanradiohistory.com -.MM/ 11 ---soimems-- ;3o 1á H/ 9,pe1 10' St1" 10 Str 1.1.,,'.04 1' 1 %.1..i WHAT'S N EWS IN RADIO? A. C. SHORT- WAVE RADIO I'II.IITII /l \S PILOT Endorsed by Professionals Power lacks The original idea be- No.K -111 for S ..0 hind the Pilotrons was 171 -A Tubes to make a line of radio Thorough filtration of tubes for a select group direct current output, of professional radio makes hum inaudible. engineers, custom set - Self-contained rectifier tube. Hlghlp compact. builders, radio research- Delivers tip to 220 volts. ers, and others whose C plete. toady for use. Espe.lii l. recommended standards are consider- for the A.C. Super-Wasp. ably higher than the PILOT SUPER-WASI' general public's. To No. K-112 $19.50 win endorsement from for 245 Tubes radio's fussiest folks, two 2.45's Kit Power Easily hn ndlcs 4r 0 had in posh -poll pins five or K -115 Pack Pilotrons to he is 227 and 224 types. Extra outstandingly superior! Variable resistance 'n- The constantly nlou cling of full 3 delivery 4s ears rated voltages front the Hear dozens of stations you never knew demand for Pilotrons various Ut Ps. Delivers up existed . short -wave broadcasts from required the purchase to 300 volts. Ultra-com- foreign countries . strange music of pact. Compete, ready for an additional tube use. surprises by the score the thrill of factory.
    [Show full text]
  • Calculators, Technical Drawing and Rulers Page: 2
    Calculators, Technical Drawing and Rulers Page: 2 CALCULATORS, TECHNICAL DRAWING AND RULERS Calculators | Rulers | Technical Drawing Instruments 180 DEGREE PROTRACTOR Measure perfect angles and be accurate with this 180 degree protractor which is 14 cm in length. It also solves the purpose of a short ruler. Read More SKU: 6009827868330 Price: R11.49 Category: Technical Drawing Instruments Free Delivery on all orders over R1000 Calculators, Technical Drawing and Rulers Page: 3 360 DEGREE 10 CM PROTRACTOR Create the perfect circle with this 360 degree protractor. This well graduated protratcor is 10 cm in length and is cut out in the centre for easy usage. Read More SKU: 6009827868347 Price: R10.34 Category: Technical Drawing Instruments 60CMT SQUARE RULER Draw straight and parallel lines with ease with this 60 cm long T-square ruler. Produced from premium quality plastic, this ruler has a smooth finish and is well graduated. Read More SKU: 6009827868477 Price: R40.24 Category: Technical Drawing Instruments Free Delivery on all orders over R1000 Calculators, Technical Drawing and Rulers Page: 4 SCALE RULER TRI-SHAPE ENGINEER Crafted especially for engineers and architects, this tri-shaped scale ruler is highly functional. This ruler offers precise and accurate measurements. Read More SKU: 6009534703511 Price: R34.49 Category: Technical Drawing Instruments LINE GUIDE ACRYLIC GRID RULER 50CM FOR TECHNICAL DRAWING 50 cm long, this ruler is a must have for artists who love precision in their work. It comprises of acrylic grid and line guide for utmost accuracy. Read More SKU: 6009827868491 Price: R28.74 Category: Technical Drawing Instruments Free Delivery on all orders over R1000 Calculators, Technical Drawing and Rulers Page: 5 55CM T-SQUARE RULER(6206) Engineering drawing made easy with this 55 cm long T-Square ruler.
    [Show full text]
  • Evaluation of the Uncertainty of Measurement in Calibration
    EA-4/02 • Evaluation of the Uncertainty of Measurement in Calibration Publication Reference EA-4/02 M: 2013 Evaluation of the Uncertainty of Measurement In Calibration PURPOSE The purpose of this document is to harmonise evaluation of uncertainty of measurement within EA, to set up, in addition to the general requirements of EA, the specific demands in reporting uncertainty of measurement on calibration certificates issued by accredited laboratories and to assist accreditation bodies with a coherent assignment of Calibration and Measurement Capability to calibration laboratories accredited by them. As the rules laid down in this document are in compliance with both ILAC policy for uncertainty in calibration and the recommendations of the Guide to the Expression of Uncertainty in Measurement, the implementation of EA-4/02 will also foster the global acceptance of European results of measurement. Septembre 2013 rev 01 Page 1 of 75 EA-4/02 • Evaluation of the Uncertainty of Measurement in Calibration Authorship This document has been drafted bythe EA Laboratory Committee. Official language The text may be translated into other languages as required. The English language version remains the definitive version. Copyright The copyright of this text is held by EA. The text may not be copied for resale. Further information For further information about this publication, contact your National member of EA. You will find the list of members at the web-site: www.european-accreditation.org Category: Application documents and Technical Adcvisory documents
    [Show full text]